| /* | |
| * Copyright 2018 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * | |
| */ | |
| #include <linux/debugfs.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/reboot.h> | |
| #include <linux/syscalls.h> | |
| #include "amdgpu.h" | |
| #include "amdgpu_ras.h" | |
| #include "amdgpu_atomfirmware.h" | |
| #include "amdgpu_xgmi.h" | |
| #include "ivsrcid/nbio/irqsrcs_nbif_7_4.h" | |
| static const char *RAS_FS_NAME = "ras"; | |
| const char *ras_error_string[] = { | |
| "none", | |
| "parity", | |
| "single_correctable", | |
| "multi_uncorrectable", | |
| "poison", | |
| }; | |
| const char *ras_block_string[] = { | |
| "umc", | |
| "sdma", | |
| "gfx", | |
| "mmhub", | |
| "athub", | |
| "pcie_bif", | |
| "hdp", | |
| "xgmi_wafl", | |
| "df", | |
| "smn", | |
| "sem", | |
| "mp0", | |
| "mp1", | |
| "fuse", | |
| }; | |
| #define ras_err_str(i) (ras_error_string[ffs(i)]) | |
| #define ras_block_str(i) (ras_block_string[i]) | |
| #define RAS_DEFAULT_FLAGS (AMDGPU_RAS_FLAG_INIT_BY_VBIOS) | |
| /* inject address is 52 bits */ | |
| #define RAS_UMC_INJECT_ADDR_LIMIT (0x1ULL << 52) | |
| /* typical ECC bad page rate(1 bad page per 100MB VRAM) */ | |
| #define RAS_BAD_PAGE_RATE (100 * 1024 * 1024ULL) | |
| enum amdgpu_ras_retire_page_reservation { | |
| AMDGPU_RAS_RETIRE_PAGE_RESERVED, | |
| AMDGPU_RAS_RETIRE_PAGE_PENDING, | |
| AMDGPU_RAS_RETIRE_PAGE_FAULT, | |
| }; | |
| atomic_t amdgpu_ras_in_intr = ATOMIC_INIT(0); | |
| static bool amdgpu_ras_check_bad_page(struct amdgpu_device *adev, | |
| uint64_t addr); | |
| void amdgpu_ras_set_error_query_ready(struct amdgpu_device *adev, bool ready) | |
| { | |
| if (adev && amdgpu_ras_get_context(adev)) | |
| amdgpu_ras_get_context(adev)->error_query_ready = ready; | |
| } | |
| static bool amdgpu_ras_get_error_query_ready(struct amdgpu_device *adev) | |
| { | |
| if (adev && amdgpu_ras_get_context(adev)) | |
| return amdgpu_ras_get_context(adev)->error_query_ready; | |
| return false; | |
| } | |
| static ssize_t amdgpu_ras_debugfs_read(struct file *f, char __user *buf, | |
| size_t size, loff_t *pos) | |
| { | |
| struct ras_manager *obj = (struct ras_manager *)file_inode(f)->i_private; | |
| struct ras_query_if info = { | |
| .head = obj->head, | |
| }; | |
| ssize_t s; | |
| char val[128]; | |
| if (amdgpu_ras_error_query(obj->adev, &info)) | |
| return -EINVAL; | |
| s = snprintf(val, sizeof(val), "%s: %lu\n%s: %lu\n", | |
| "ue", info.ue_count, | |
| "ce", info.ce_count); | |
| if (*pos >= s) | |
| return 0; | |
| s -= *pos; | |
| s = min_t(u64, s, size); | |
| if (copy_to_user(buf, &val[*pos], s)) | |
| return -EINVAL; | |
| *pos += s; | |
| return s; | |
| } | |
| static const struct file_operations amdgpu_ras_debugfs_ops = { | |
| .owner = THIS_MODULE, | |
| .read = amdgpu_ras_debugfs_read, | |
| .write = NULL, | |
| .llseek = default_llseek | |
| }; | |
| static int amdgpu_ras_find_block_id_by_name(const char *name, int *block_id) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(ras_block_string); i++) { | |
| *block_id = i; | |
| if (strcmp(name, ras_block_str(i)) == 0) | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| static int amdgpu_ras_debugfs_ctrl_parse_data(struct file *f, | |
| const char __user *buf, size_t size, | |
| loff_t *pos, struct ras_debug_if *data) | |
| { | |
| ssize_t s = min_t(u64, 64, size); | |
| char str[65]; | |
| char block_name[33]; | |
| char err[9] = "ue"; | |
| int op = -1; | |
| int block_id; | |
| uint32_t sub_block; | |
| u64 address, value; | |
| if (*pos) | |
| return -EINVAL; | |
| *pos = size; | |
| memset(str, 0, sizeof(str)); | |
| memset(data, 0, sizeof(*data)); | |
| if (copy_from_user(str, buf, s)) | |
| return -EINVAL; | |
| if (sscanf(str, "disable %32s", block_name) == 1) | |
| op = 0; | |
| else if (sscanf(str, "enable %32s %8s", block_name, err) == 2) | |
| op = 1; | |
| else if (sscanf(str, "inject %32s %8s", block_name, err) == 2) | |
| op = 2; | |
| else if (str[0] && str[1] && str[2] && str[3]) | |
| /* ascii string, but commands are not matched. */ | |
| return -EINVAL; | |
| if (op != -1) { | |
| if (amdgpu_ras_find_block_id_by_name(block_name, &block_id)) | |
| return -EINVAL; | |
| data->head.block = block_id; | |
| /* only ue and ce errors are supported */ | |
| if (!memcmp("ue", err, 2)) | |
| data->head.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE; | |
| else if (!memcmp("ce", err, 2)) | |
| data->head.type = AMDGPU_RAS_ERROR__SINGLE_CORRECTABLE; | |
| else | |
| return -EINVAL; | |
| data->op = op; | |
| if (op == 2) { | |
| if (sscanf(str, "%*s %*s %*s %u %llu %llu", | |
| &sub_block, &address, &value) != 3) | |
| if (sscanf(str, "%*s %*s %*s 0x%x 0x%llx 0x%llx", | |
| &sub_block, &address, &value) != 3) | |
| return -EINVAL; | |
| data->head.sub_block_index = sub_block; | |
| data->inject.address = address; | |
| data->inject.value = value; | |
| } | |
| } else { | |
| if (size < sizeof(*data)) | |
| return -EINVAL; | |
| if (copy_from_user(data, buf, sizeof(*data))) | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * DOC: AMDGPU RAS debugfs control interface | |
| * | |
| * It accepts struct ras_debug_if who has two members. | |
| * | |
| * First member: ras_debug_if::head or ras_debug_if::inject. | |
| * | |
| * head is used to indicate which IP block will be under control. | |
| * | |
| * head has four members, they are block, type, sub_block_index, name. | |
| * block: which IP will be under control. | |
| * type: what kind of error will be enabled/disabled/injected. | |
| * sub_block_index: some IPs have subcomponets. say, GFX, sDMA. | |
| * name: the name of IP. | |
| * | |
| * inject has two more members than head, they are address, value. | |
| * As their names indicate, inject operation will write the | |
| * value to the address. | |
| * | |
| * The second member: struct ras_debug_if::op. | |
| * It has three kinds of operations. | |
| * | |
| * - 0: disable RAS on the block. Take ::head as its data. | |
| * - 1: enable RAS on the block. Take ::head as its data. | |
| * - 2: inject errors on the block. Take ::inject as its data. | |
| * | |
| * How to use the interface? | |
| * | |
| * Programs | |
| * | |
| * Copy the struct ras_debug_if in your codes and initialize it. | |
| * Write the struct to the control node. | |
| * | |
| * Shells | |
| * | |
| * .. code-block:: bash | |
| * | |
| * echo op block [error [sub_block address value]] > .../ras/ras_ctrl | |
| * | |
| * Parameters: | |
| * | |
| * op: disable, enable, inject | |
| * disable: only block is needed | |
| * enable: block and error are needed | |
| * inject: error, address, value are needed | |
| * block: umc, sdma, gfx, ......... | |
| * see ras_block_string[] for details | |
| * error: ue, ce | |
| * ue: multi_uncorrectable | |
| * ce: single_correctable | |
| * sub_block: | |
| * sub block index, pass 0 if there is no sub block | |
| * | |
| * here are some examples for bash commands: | |
| * | |
| * .. code-block:: bash | |
| * | |
| * echo inject umc ue 0x0 0x0 0x0 > /sys/kernel/debug/dri/0/ras/ras_ctrl | |
| * echo inject umc ce 0 0 0 > /sys/kernel/debug/dri/0/ras/ras_ctrl | |
| * echo disable umc > /sys/kernel/debug/dri/0/ras/ras_ctrl | |
| * | |
| * How to check the result? | |
| * | |
| * For disable/enable, please check ras features at | |
| * /sys/class/drm/card[0/1/2...]/device/ras/features | |
| * | |
| * For inject, please check corresponding err count at | |
| * /sys/class/drm/card[0/1/2...]/device/ras/[gfx/sdma/...]_err_count | |
| * | |
| * .. note:: | |
| * Operations are only allowed on blocks which are supported. | |
| * Please check ras mask at /sys/module/amdgpu/parameters/ras_mask | |
| * to see which blocks support RAS on a particular asic. | |
| * | |
| */ | |
| static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *buf, | |
| size_t size, loff_t *pos) | |
| { | |
| struct amdgpu_device *adev = (struct amdgpu_device *)file_inode(f)->i_private; | |
| struct ras_debug_if data; | |
| int ret = 0; | |
| if (!amdgpu_ras_get_error_query_ready(adev)) { | |
| dev_warn(adev->dev, "RAS WARN: error injection " | |
| "currently inaccessible\n"); | |
| return size; | |
| } | |
| ret = amdgpu_ras_debugfs_ctrl_parse_data(f, buf, size, pos, &data); | |
| if (ret) | |
| return -EINVAL; | |
| if (!amdgpu_ras_is_supported(adev, data.head.block)) | |
| return -EINVAL; | |
| switch (data.op) { | |
| case 0: | |
| ret = amdgpu_ras_feature_enable(adev, &data.head, 0); | |
| break; | |
| case 1: | |
| ret = amdgpu_ras_feature_enable(adev, &data.head, 1); | |
| break; | |
| case 2: | |
| if ((data.inject.address >= adev->gmc.mc_vram_size) || | |
| (data.inject.address >= RAS_UMC_INJECT_ADDR_LIMIT)) { | |
| dev_warn(adev->dev, "RAS WARN: input address " | |
| "0x%llx is invalid.", | |
| data.inject.address); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| /* umc ce/ue error injection for a bad page is not allowed */ | |
| if ((data.head.block == AMDGPU_RAS_BLOCK__UMC) && | |
| amdgpu_ras_check_bad_page(adev, data.inject.address)) { | |
| dev_warn(adev->dev, "RAS WARN: 0x%llx has been marked " | |
| "as bad before error injection!\n", | |
| data.inject.address); | |
| break; | |
| } | |
| /* data.inject.address is offset instead of absolute gpu address */ | |
| ret = amdgpu_ras_error_inject(adev, &data.inject); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (ret) | |
| return -EINVAL; | |
| return size; | |
| } | |
| /** | |
| * DOC: AMDGPU RAS debugfs EEPROM table reset interface | |
| * | |
| * Some boards contain an EEPROM which is used to persistently store a list of | |
| * bad pages which experiences ECC errors in vram. This interface provides | |
| * a way to reset the EEPROM, e.g., after testing error injection. | |
| * | |
| * Usage: | |
| * | |
| * .. code-block:: bash | |
| * | |
| * echo 1 > ../ras/ras_eeprom_reset | |
| * | |
| * will reset EEPROM table to 0 entries. | |
| * | |
| */ | |
| static ssize_t amdgpu_ras_debugfs_eeprom_write(struct file *f, const char __user *buf, | |
| size_t size, loff_t *pos) | |
| { | |
| struct amdgpu_device *adev = | |
| (struct amdgpu_device *)file_inode(f)->i_private; | |
| int ret; | |
| ret = amdgpu_ras_eeprom_reset_table( | |
| &(amdgpu_ras_get_context(adev)->eeprom_control)); | |
| if (ret == 1) { | |
| amdgpu_ras_get_context(adev)->flags = RAS_DEFAULT_FLAGS; | |
| return size; | |
| } else { | |
| return -EIO; | |
| } | |
| } | |
| static const struct file_operations amdgpu_ras_debugfs_ctrl_ops = { | |
| .owner = THIS_MODULE, | |
| .read = NULL, | |
| .write = amdgpu_ras_debugfs_ctrl_write, | |
| .llseek = default_llseek | |
| }; | |
| static const struct file_operations amdgpu_ras_debugfs_eeprom_ops = { | |
| .owner = THIS_MODULE, | |
| .read = NULL, | |
| .write = amdgpu_ras_debugfs_eeprom_write, | |
| .llseek = default_llseek | |
| }; | |
| /** | |
| * DOC: AMDGPU RAS sysfs Error Count Interface | |
| * | |
| * It allows the user to read the error count for each IP block on the gpu through | |
| * /sys/class/drm/card[0/1/2...]/device/ras/[gfx/sdma/...]_err_count | |
| * | |
| * It outputs the multiple lines which report the uncorrected (ue) and corrected | |
| * (ce) error counts. | |
| * | |
| * The format of one line is below, | |
| * | |
| * [ce|ue]: count | |
| * | |
| * Example: | |
| * | |
| * .. code-block:: bash | |
| * | |
| * ue: 0 | |
| * ce: 1 | |
| * | |
| */ | |
| static ssize_t amdgpu_ras_sysfs_read(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct ras_manager *obj = container_of(attr, struct ras_manager, sysfs_attr); | |
| struct ras_query_if info = { | |
| .head = obj->head, | |
| }; | |
| if (!amdgpu_ras_get_error_query_ready(obj->adev)) | |
| return snprintf(buf, PAGE_SIZE, | |
| "Query currently inaccessible\n"); | |
| if (amdgpu_ras_error_query(obj->adev, &info)) | |
| return -EINVAL; | |
| return snprintf(buf, PAGE_SIZE, "%s: %lu\n%s: %lu\n", | |
| "ue", info.ue_count, | |
| "ce", info.ce_count); | |
| } | |
| /* obj begin */ | |
| #define get_obj(obj) do { (obj)->use++; } while (0) | |
| #define alive_obj(obj) ((obj)->use) | |
| static inline void put_obj(struct ras_manager *obj) | |
| { | |
| if (obj && --obj->use == 0) | |
| list_del(&obj->node); | |
| if (obj && obj->use < 0) { | |
| DRM_ERROR("RAS ERROR: Unbalance obj(%s) use\n", obj->head.name); | |
| } | |
| } | |
| /* make one obj and return it. */ | |
| static struct ras_manager *amdgpu_ras_create_obj(struct amdgpu_device *adev, | |
| struct ras_common_if *head) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj; | |
| if (!con) | |
| return NULL; | |
| if (head->block >= AMDGPU_RAS_BLOCK_COUNT) | |
| return NULL; | |
| obj = &con->objs[head->block]; | |
| /* already exist. return obj? */ | |
| if (alive_obj(obj)) | |
| return NULL; | |
| obj->head = *head; | |
| obj->adev = adev; | |
| list_add(&obj->node, &con->head); | |
| get_obj(obj); | |
| return obj; | |
| } | |
| /* return an obj equal to head, or the first when head is NULL */ | |
| struct ras_manager *amdgpu_ras_find_obj(struct amdgpu_device *adev, | |
| struct ras_common_if *head) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj; | |
| int i; | |
| if (!con) | |
| return NULL; | |
| if (head) { | |
| if (head->block >= AMDGPU_RAS_BLOCK_COUNT) | |
| return NULL; | |
| obj = &con->objs[head->block]; | |
| if (alive_obj(obj)) { | |
| WARN_ON(head->block != obj->head.block); | |
| return obj; | |
| } | |
| } else { | |
| for (i = 0; i < AMDGPU_RAS_BLOCK_COUNT; i++) { | |
| obj = &con->objs[i]; | |
| if (alive_obj(obj)) { | |
| WARN_ON(i != obj->head.block); | |
| return obj; | |
| } | |
| } | |
| } | |
| return NULL; | |
| } | |
| /* obj end */ | |
| static void amdgpu_ras_parse_status_code(struct amdgpu_device *adev, | |
| const char* invoke_type, | |
| const char* block_name, | |
| enum ta_ras_status ret) | |
| { | |
| switch (ret) { | |
| case TA_RAS_STATUS__SUCCESS: | |
| return; | |
| case TA_RAS_STATUS__ERROR_RAS_NOT_AVAILABLE: | |
| dev_warn(adev->dev, | |
| "RAS WARN: %s %s currently unavailable\n", | |
| invoke_type, | |
| block_name); | |
| break; | |
| default: | |
| dev_err(adev->dev, | |
| "RAS ERROR: %s %s error failed ret 0x%X\n", | |
| invoke_type, | |
| block_name, | |
| ret); | |
| } | |
| } | |
| /* feature ctl begin */ | |
| static int amdgpu_ras_is_feature_allowed(struct amdgpu_device *adev, | |
| struct ras_common_if *head) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| return con->hw_supported & BIT(head->block); | |
| } | |
| static int amdgpu_ras_is_feature_enabled(struct amdgpu_device *adev, | |
| struct ras_common_if *head) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| return con->features & BIT(head->block); | |
| } | |
| /* | |
| * if obj is not created, then create one. | |
| * set feature enable flag. | |
| */ | |
| static int __amdgpu_ras_feature_enable(struct amdgpu_device *adev, | |
| struct ras_common_if *head, int enable) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, head); | |
| /* If hardware does not support ras, then do not create obj. | |
| * But if hardware support ras, we can create the obj. | |
| * Ras framework checks con->hw_supported to see if it need do | |
| * corresponding initialization. | |
| * IP checks con->support to see if it need disable ras. | |
| */ | |
| if (!amdgpu_ras_is_feature_allowed(adev, head)) | |
| return 0; | |
| if (!(!!enable ^ !!amdgpu_ras_is_feature_enabled(adev, head))) | |
| return 0; | |
| if (enable) { | |
| if (!obj) { | |
| obj = amdgpu_ras_create_obj(adev, head); | |
| if (!obj) | |
| return -EINVAL; | |
| } else { | |
| /* In case we create obj somewhere else */ | |
| get_obj(obj); | |
| } | |
| con->features |= BIT(head->block); | |
| } else { | |
| if (obj && amdgpu_ras_is_feature_enabled(adev, head)) { | |
| con->features &= ~BIT(head->block); | |
| put_obj(obj); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* wrapper of psp_ras_enable_features */ | |
| int amdgpu_ras_feature_enable(struct amdgpu_device *adev, | |
| struct ras_common_if *head, bool enable) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| union ta_ras_cmd_input *info; | |
| int ret; | |
| if (!con) | |
| return -EINVAL; | |
| info = kzalloc(sizeof(union ta_ras_cmd_input), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| if (!enable) { | |
| info->disable_features = (struct ta_ras_disable_features_input) { | |
| .block_id = amdgpu_ras_block_to_ta(head->block), | |
| .error_type = amdgpu_ras_error_to_ta(head->type), | |
| }; | |
| } else { | |
| info->enable_features = (struct ta_ras_enable_features_input) { | |
| .block_id = amdgpu_ras_block_to_ta(head->block), | |
| .error_type = amdgpu_ras_error_to_ta(head->type), | |
| }; | |
| } | |
| /* Do not enable if it is not allowed. */ | |
| WARN_ON(enable && !amdgpu_ras_is_feature_allowed(adev, head)); | |
| /* Are we alerady in that state we are going to set? */ | |
| if (!(!!enable ^ !!amdgpu_ras_is_feature_enabled(adev, head))) { | |
| ret = 0; | |
| goto out; | |
| } | |
| if (!amdgpu_ras_intr_triggered()) { | |
| ret = psp_ras_enable_features(&adev->psp, info, enable); | |
| if (ret) { | |
| amdgpu_ras_parse_status_code(adev, | |
| enable ? "enable":"disable", | |
| ras_block_str(head->block), | |
| (enum ta_ras_status)ret); | |
| if (ret == TA_RAS_STATUS__RESET_NEEDED) | |
| ret = -EAGAIN; | |
| else | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| } | |
| /* setup the obj */ | |
| __amdgpu_ras_feature_enable(adev, head, enable); | |
| ret = 0; | |
| out: | |
| kfree(info); | |
| return ret; | |
| } | |
| /* Only used in device probe stage and called only once. */ | |
| int amdgpu_ras_feature_enable_on_boot(struct amdgpu_device *adev, | |
| struct ras_common_if *head, bool enable) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| int ret; | |
| if (!con) | |
| return -EINVAL; | |
| if (con->flags & AMDGPU_RAS_FLAG_INIT_BY_VBIOS) { | |
| if (enable) { | |
| /* There is no harm to issue a ras TA cmd regardless of | |
| * the currecnt ras state. | |
| * If current state == target state, it will do nothing | |
| * But sometimes it requests driver to reset and repost | |
| * with error code -EAGAIN. | |
| */ | |
| ret = amdgpu_ras_feature_enable(adev, head, 1); | |
| /* With old ras TA, we might fail to enable ras. | |
| * Log it and just setup the object. | |
| * TODO need remove this WA in the future. | |
| */ | |
| if (ret == -EINVAL) { | |
| ret = __amdgpu_ras_feature_enable(adev, head, 1); | |
| if (!ret) | |
| dev_info(adev->dev, | |
| "RAS INFO: %s setup object\n", | |
| ras_block_str(head->block)); | |
| } | |
| } else { | |
| /* setup the object then issue a ras TA disable cmd.*/ | |
| ret = __amdgpu_ras_feature_enable(adev, head, 1); | |
| if (ret) | |
| return ret; | |
| ret = amdgpu_ras_feature_enable(adev, head, 0); | |
| } | |
| } else | |
| ret = amdgpu_ras_feature_enable(adev, head, enable); | |
| return ret; | |
| } | |
| static int amdgpu_ras_disable_all_features(struct amdgpu_device *adev, | |
| bool bypass) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj, *tmp; | |
| list_for_each_entry_safe(obj, tmp, &con->head, node) { | |
| /* bypass psp. | |
| * aka just release the obj and corresponding flags | |
| */ | |
| if (bypass) { | |
| if (__amdgpu_ras_feature_enable(adev, &obj->head, 0)) | |
| break; | |
| } else { | |
| if (amdgpu_ras_feature_enable(adev, &obj->head, 0)) | |
| break; | |
| } | |
| } | |
| return con->features; | |
| } | |
| static int amdgpu_ras_enable_all_features(struct amdgpu_device *adev, | |
| bool bypass) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| int ras_block_count = AMDGPU_RAS_BLOCK_COUNT; | |
| int i; | |
| const enum amdgpu_ras_error_type default_ras_type = | |
| AMDGPU_RAS_ERROR__NONE; | |
| for (i = 0; i < ras_block_count; i++) { | |
| struct ras_common_if head = { | |
| .block = i, | |
| .type = default_ras_type, | |
| .sub_block_index = 0, | |
| }; | |
| strcpy(head.name, ras_block_str(i)); | |
| if (bypass) { | |
| /* | |
| * bypass psp. vbios enable ras for us. | |
| * so just create the obj | |
| */ | |
| if (__amdgpu_ras_feature_enable(adev, &head, 1)) | |
| break; | |
| } else { | |
| if (amdgpu_ras_feature_enable(adev, &head, 1)) | |
| break; | |
| } | |
| } | |
| return con->features; | |
| } | |
| /* feature ctl end */ | |
| /* query/inject/cure begin */ | |
| int amdgpu_ras_error_query(struct amdgpu_device *adev, | |
| struct ras_query_if *info) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &info->head); | |
| struct ras_err_data err_data = {0, 0, 0, NULL}; | |
| int i; | |
| if (!obj) | |
| return -EINVAL; | |
| switch (info->head.block) { | |
| case AMDGPU_RAS_BLOCK__UMC: | |
| if (adev->umc.funcs->query_ras_error_count) | |
| adev->umc.funcs->query_ras_error_count(adev, &err_data); | |
| /* umc query_ras_error_address is also responsible for clearing | |
| * error status | |
| */ | |
| if (adev->umc.funcs->query_ras_error_address) | |
| adev->umc.funcs->query_ras_error_address(adev, &err_data); | |
| break; | |
| case AMDGPU_RAS_BLOCK__SDMA: | |
| if (adev->sdma.funcs->query_ras_error_count) { | |
| for (i = 0; i < adev->sdma.num_instances; i++) | |
| adev->sdma.funcs->query_ras_error_count(adev, i, | |
| &err_data); | |
| } | |
| break; | |
| case AMDGPU_RAS_BLOCK__GFX: | |
| if (adev->gfx.funcs->query_ras_error_count) | |
| adev->gfx.funcs->query_ras_error_count(adev, &err_data); | |
| break; | |
| case AMDGPU_RAS_BLOCK__MMHUB: | |
| if (adev->mmhub.funcs->query_ras_error_count) | |
| adev->mmhub.funcs->query_ras_error_count(adev, &err_data); | |
| break; | |
| case AMDGPU_RAS_BLOCK__PCIE_BIF: | |
| if (adev->nbio.funcs->query_ras_error_count) | |
| adev->nbio.funcs->query_ras_error_count(adev, &err_data); | |
| break; | |
| case AMDGPU_RAS_BLOCK__XGMI_WAFL: | |
| amdgpu_xgmi_query_ras_error_count(adev, &err_data); | |
| break; | |
| default: | |
| break; | |
| } | |
| obj->err_data.ue_count += err_data.ue_count; | |
| obj->err_data.ce_count += err_data.ce_count; | |
| info->ue_count = obj->err_data.ue_count; | |
| info->ce_count = obj->err_data.ce_count; | |
| if (err_data.ce_count) { | |
| dev_info(adev->dev, "%ld correctable hardware errors " | |
| "detected in %s block, no user " | |
| "action is needed.\n", | |
| obj->err_data.ce_count, | |
| ras_block_str(info->head.block)); | |
| } | |
| if (err_data.ue_count) { | |
| dev_info(adev->dev, "%ld uncorrectable hardware errors " | |
| "detected in %s block\n", | |
| obj->err_data.ue_count, | |
| ras_block_str(info->head.block)); | |
| } | |
| return 0; | |
| } | |
| /* Trigger XGMI/WAFL error */ | |
| static int amdgpu_ras_error_inject_xgmi(struct amdgpu_device *adev, | |
| struct ta_ras_trigger_error_input *block_info) | |
| { | |
| int ret; | |
| if (amdgpu_dpm_set_df_cstate(adev, DF_CSTATE_DISALLOW)) | |
| dev_warn(adev->dev, "Failed to disallow df cstate"); | |
| if (amdgpu_dpm_allow_xgmi_power_down(adev, false)) | |
| dev_warn(adev->dev, "Failed to disallow XGMI power down"); | |
| ret = psp_ras_trigger_error(&adev->psp, block_info); | |
| if (amdgpu_ras_intr_triggered()) | |
| return ret; | |
| if (amdgpu_dpm_allow_xgmi_power_down(adev, true)) | |
| dev_warn(adev->dev, "Failed to allow XGMI power down"); | |
| if (amdgpu_dpm_set_df_cstate(adev, DF_CSTATE_DISALLOW)) | |
| dev_warn(adev->dev, "Failed to allow df cstate"); | |
| return ret; | |
| } | |
| /* wrapper of psp_ras_trigger_error */ | |
| int amdgpu_ras_error_inject(struct amdgpu_device *adev, | |
| struct ras_inject_if *info) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &info->head); | |
| struct ta_ras_trigger_error_input block_info = { | |
| .block_id = amdgpu_ras_block_to_ta(info->head.block), | |
| .inject_error_type = amdgpu_ras_error_to_ta(info->head.type), | |
| .sub_block_index = info->head.sub_block_index, | |
| .address = info->address, | |
| .value = info->value, | |
| }; | |
| int ret = 0; | |
| if (!obj) | |
| return -EINVAL; | |
| /* Calculate XGMI relative offset */ | |
| if (adev->gmc.xgmi.num_physical_nodes > 1) { | |
| block_info.address = | |
| amdgpu_xgmi_get_relative_phy_addr(adev, | |
| block_info.address); | |
| } | |
| switch (info->head.block) { | |
| case AMDGPU_RAS_BLOCK__GFX: | |
| if (adev->gfx.funcs->ras_error_inject) | |
| ret = adev->gfx.funcs->ras_error_inject(adev, info); | |
| else | |
| ret = -EINVAL; | |
| break; | |
| case AMDGPU_RAS_BLOCK__UMC: | |
| case AMDGPU_RAS_BLOCK__MMHUB: | |
| case AMDGPU_RAS_BLOCK__PCIE_BIF: | |
| ret = psp_ras_trigger_error(&adev->psp, &block_info); | |
| break; | |
| case AMDGPU_RAS_BLOCK__XGMI_WAFL: | |
| ret = amdgpu_ras_error_inject_xgmi(adev, &block_info); | |
| break; | |
| default: | |
| dev_info(adev->dev, "%s error injection is not supported yet\n", | |
| ras_block_str(info->head.block)); | |
| ret = -EINVAL; | |
| } | |
| amdgpu_ras_parse_status_code(adev, | |
| "inject", | |
| ras_block_str(info->head.block), | |
| (enum ta_ras_status)ret); | |
| return ret; | |
| } | |
| int amdgpu_ras_error_cure(struct amdgpu_device *adev, | |
| struct ras_cure_if *info) | |
| { | |
| /* psp fw has no cure interface for now. */ | |
| return 0; | |
| } | |
| /* get the total error counts on all IPs */ | |
| unsigned long amdgpu_ras_query_error_count(struct amdgpu_device *adev, | |
| bool is_ce) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj; | |
| struct ras_err_data data = {0, 0}; | |
| if (!con) | |
| return 0; | |
| list_for_each_entry(obj, &con->head, node) { | |
| struct ras_query_if info = { | |
| .head = obj->head, | |
| }; | |
| if (amdgpu_ras_error_query(adev, &info)) | |
| return 0; | |
| data.ce_count += info.ce_count; | |
| data.ue_count += info.ue_count; | |
| } | |
| return is_ce ? data.ce_count : data.ue_count; | |
| } | |
| /* query/inject/cure end */ | |
| /* sysfs begin */ | |
| static int amdgpu_ras_badpages_read(struct amdgpu_device *adev, | |
| struct ras_badpage **bps, unsigned int *count); | |
| static char *amdgpu_ras_badpage_flags_str(unsigned int flags) | |
| { | |
| switch (flags) { | |
| case AMDGPU_RAS_RETIRE_PAGE_RESERVED: | |
| return "R"; | |
| case AMDGPU_RAS_RETIRE_PAGE_PENDING: | |
| return "P"; | |
| case AMDGPU_RAS_RETIRE_PAGE_FAULT: | |
| default: | |
| return "F"; | |
| }; | |
| } | |
| /** | |
| * DOC: AMDGPU RAS sysfs gpu_vram_bad_pages Interface | |
| * | |
| * It allows user to read the bad pages of vram on the gpu through | |
| * /sys/class/drm/card[0/1/2...]/device/ras/gpu_vram_bad_pages | |
| * | |
| * It outputs multiple lines, and each line stands for one gpu page. | |
| * | |
| * The format of one line is below, | |
| * gpu pfn : gpu page size : flags | |
| * | |
| * gpu pfn and gpu page size are printed in hex format. | |
| * flags can be one of below character, | |
| * | |
| * R: reserved, this gpu page is reserved and not able to use. | |
| * | |
| * P: pending for reserve, this gpu page is marked as bad, will be reserved | |
| * in next window of page_reserve. | |
| * | |
| * F: unable to reserve. this gpu page can't be reserved due to some reasons. | |
| * | |
| * Examples: | |
| * | |
| * .. code-block:: bash | |
| * | |
| * 0x00000001 : 0x00001000 : R | |
| * 0x00000002 : 0x00001000 : P | |
| * | |
| */ | |
| static ssize_t amdgpu_ras_sysfs_badpages_read(struct file *f, | |
| struct kobject *kobj, struct bin_attribute *attr, | |
| char *buf, loff_t ppos, size_t count) | |
| { | |
| struct amdgpu_ras *con = | |
| container_of(attr, struct amdgpu_ras, badpages_attr); | |
| struct amdgpu_device *adev = con->adev; | |
| const unsigned int element_size = | |
| sizeof("0xabcdabcd : 0x12345678 : R\n") - 1; | |
| unsigned int start = div64_ul(ppos + element_size - 1, element_size); | |
| unsigned int end = div64_ul(ppos + count - 1, element_size); | |
| ssize_t s = 0; | |
| struct ras_badpage *bps = NULL; | |
| unsigned int bps_count = 0; | |
| memset(buf, 0, count); | |
| if (amdgpu_ras_badpages_read(adev, &bps, &bps_count)) | |
| return 0; | |
| for (; start < end && start < bps_count; start++) | |
| s += scnprintf(&buf[s], element_size + 1, | |
| "0x%08x : 0x%08x : %1s\n", | |
| bps[start].bp, | |
| bps[start].size, | |
| amdgpu_ras_badpage_flags_str(bps[start].flags)); | |
| kfree(bps); | |
| return s; | |
| } | |
| static ssize_t amdgpu_ras_sysfs_features_read(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct amdgpu_ras *con = | |
| container_of(attr, struct amdgpu_ras, features_attr); | |
| return scnprintf(buf, PAGE_SIZE, "feature mask: 0x%x\n", con->features); | |
| } | |
| static void amdgpu_ras_sysfs_remove_bad_page_node(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| sysfs_remove_file_from_group(&adev->dev->kobj, | |
| &con->badpages_attr.attr, | |
| RAS_FS_NAME); | |
| } | |
| static int amdgpu_ras_sysfs_remove_feature_node(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct attribute *attrs[] = { | |
| &con->features_attr.attr, | |
| NULL | |
| }; | |
| struct attribute_group group = { | |
| .name = RAS_FS_NAME, | |
| .attrs = attrs, | |
| }; | |
| sysfs_remove_group(&adev->dev->kobj, &group); | |
| return 0; | |
| } | |
| int amdgpu_ras_sysfs_create(struct amdgpu_device *adev, | |
| struct ras_fs_if *head) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &head->head); | |
| if (!obj || obj->attr_inuse) | |
| return -EINVAL; | |
| get_obj(obj); | |
| memcpy(obj->fs_data.sysfs_name, | |
| head->sysfs_name, | |
| sizeof(obj->fs_data.sysfs_name)); | |
| obj->sysfs_attr = (struct device_attribute){ | |
| .attr = { | |
| .name = obj->fs_data.sysfs_name, | |
| .mode = S_IRUGO, | |
| }, | |
| .show = amdgpu_ras_sysfs_read, | |
| }; | |
| sysfs_attr_init(&obj->sysfs_attr.attr); | |
| if (sysfs_add_file_to_group(&adev->dev->kobj, | |
| &obj->sysfs_attr.attr, | |
| RAS_FS_NAME)) { | |
| put_obj(obj); | |
| return -EINVAL; | |
| } | |
| obj->attr_inuse = 1; | |
| return 0; | |
| } | |
| int amdgpu_ras_sysfs_remove(struct amdgpu_device *adev, | |
| struct ras_common_if *head) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, head); | |
| if (!obj || !obj->attr_inuse) | |
| return -EINVAL; | |
| sysfs_remove_file_from_group(&adev->dev->kobj, | |
| &obj->sysfs_attr.attr, | |
| RAS_FS_NAME); | |
| obj->attr_inuse = 0; | |
| put_obj(obj); | |
| return 0; | |
| } | |
| static int amdgpu_ras_sysfs_remove_all(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj, *tmp; | |
| list_for_each_entry_safe(obj, tmp, &con->head, node) { | |
| amdgpu_ras_sysfs_remove(adev, &obj->head); | |
| } | |
| if (amdgpu_bad_page_threshold != 0) | |
| amdgpu_ras_sysfs_remove_bad_page_node(adev); | |
| amdgpu_ras_sysfs_remove_feature_node(adev); | |
| return 0; | |
| } | |
| /* sysfs end */ | |
| /** | |
| * DOC: AMDGPU RAS Reboot Behavior for Unrecoverable Errors | |
| * | |
| * Normally when there is an uncorrectable error, the driver will reset | |
| * the GPU to recover. However, in the event of an unrecoverable error, | |
| * the driver provides an interface to reboot the system automatically | |
| * in that event. | |
| * | |
| * The following file in debugfs provides that interface: | |
| * /sys/kernel/debug/dri/[0/1/2...]/ras/auto_reboot | |
| * | |
| * Usage: | |
| * | |
| * .. code-block:: bash | |
| * | |
| * echo true > .../ras/auto_reboot | |
| * | |
| */ | |
| /* debugfs begin */ | |
| static void amdgpu_ras_debugfs_create_ctrl_node(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct drm_minor *minor = adev_to_drm(adev)->primary; | |
| con->dir = debugfs_create_dir(RAS_FS_NAME, minor->debugfs_root); | |
| debugfs_create_file("ras_ctrl", S_IWUGO | S_IRUGO, con->dir, | |
| adev, &amdgpu_ras_debugfs_ctrl_ops); | |
| debugfs_create_file("ras_eeprom_reset", S_IWUGO | S_IRUGO, con->dir, | |
| adev, &amdgpu_ras_debugfs_eeprom_ops); | |
| /* | |
| * After one uncorrectable error happens, usually GPU recovery will | |
| * be scheduled. But due to the known problem in GPU recovery failing | |
| * to bring GPU back, below interface provides one direct way to | |
| * user to reboot system automatically in such case within | |
| * ERREVENT_ATHUB_INTERRUPT generated. Normal GPU recovery routine | |
| * will never be called. | |
| */ | |
| debugfs_create_bool("auto_reboot", S_IWUGO | S_IRUGO, con->dir, | |
| &con->reboot); | |
| /* | |
| * User could set this not to clean up hardware's error count register | |
| * of RAS IPs during ras recovery. | |
| */ | |
| debugfs_create_bool("disable_ras_err_cnt_harvest", 0644, | |
| con->dir, &con->disable_ras_err_cnt_harvest); | |
| } | |
| void amdgpu_ras_debugfs_create(struct amdgpu_device *adev, | |
| struct ras_fs_if *head) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &head->head); | |
| if (!obj || obj->ent) | |
| return; | |
| get_obj(obj); | |
| memcpy(obj->fs_data.debugfs_name, | |
| head->debugfs_name, | |
| sizeof(obj->fs_data.debugfs_name)); | |
| obj->ent = debugfs_create_file(obj->fs_data.debugfs_name, | |
| S_IWUGO | S_IRUGO, con->dir, obj, | |
| &amdgpu_ras_debugfs_ops); | |
| } | |
| void amdgpu_ras_debugfs_create_all(struct amdgpu_device *adev) | |
| { | |
| #if defined(CONFIG_DEBUG_FS) | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj; | |
| struct ras_fs_if fs_info; | |
| /* | |
| * it won't be called in resume path, no need to check | |
| * suspend and gpu reset status | |
| */ | |
| if (!con) | |
| return; | |
| amdgpu_ras_debugfs_create_ctrl_node(adev); | |
| list_for_each_entry(obj, &con->head, node) { | |
| if (amdgpu_ras_is_supported(adev, obj->head.block) && | |
| (obj->attr_inuse == 1)) { | |
| sprintf(fs_info.debugfs_name, "%s_err_inject", | |
| ras_block_str(obj->head.block)); | |
| fs_info.head = obj->head; | |
| amdgpu_ras_debugfs_create(adev, &fs_info); | |
| } | |
| } | |
| #endif | |
| } | |
| void amdgpu_ras_debugfs_remove(struct amdgpu_device *adev, | |
| struct ras_common_if *head) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, head); | |
| if (!obj || !obj->ent) | |
| return; | |
| obj->ent = NULL; | |
| put_obj(obj); | |
| } | |
| static void amdgpu_ras_debugfs_remove_all(struct amdgpu_device *adev) | |
| { | |
| #if defined(CONFIG_DEBUG_FS) | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj, *tmp; | |
| list_for_each_entry_safe(obj, tmp, &con->head, node) { | |
| amdgpu_ras_debugfs_remove(adev, &obj->head); | |
| } | |
| con->dir = NULL; | |
| #endif | |
| } | |
| /* debugfs end */ | |
| /* ras fs */ | |
| static BIN_ATTR(gpu_vram_bad_pages, S_IRUGO, | |
| amdgpu_ras_sysfs_badpages_read, NULL, 0); | |
| static DEVICE_ATTR(features, S_IRUGO, | |
| amdgpu_ras_sysfs_features_read, NULL); | |
| static int amdgpu_ras_fs_init(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct attribute_group group = { | |
| .name = RAS_FS_NAME, | |
| }; | |
| struct attribute *attrs[] = { | |
| &con->features_attr.attr, | |
| NULL | |
| }; | |
| struct bin_attribute *bin_attrs[] = { | |
| NULL, | |
| NULL, | |
| }; | |
| int r; | |
| /* add features entry */ | |
| con->features_attr = dev_attr_features; | |
| group.attrs = attrs; | |
| sysfs_attr_init(attrs[0]); | |
| if (amdgpu_bad_page_threshold != 0) { | |
| /* add bad_page_features entry */ | |
| bin_attr_gpu_vram_bad_pages.private = NULL; | |
| con->badpages_attr = bin_attr_gpu_vram_bad_pages; | |
| bin_attrs[0] = &con->badpages_attr; | |
| group.bin_attrs = bin_attrs; | |
| sysfs_bin_attr_init(bin_attrs[0]); | |
| } | |
| r = sysfs_create_group(&adev->dev->kobj, &group); | |
| if (r) | |
| dev_err(adev->dev, "Failed to create RAS sysfs group!"); | |
| return 0; | |
| } | |
| static int amdgpu_ras_fs_fini(struct amdgpu_device *adev) | |
| { | |
| amdgpu_ras_debugfs_remove_all(adev); | |
| amdgpu_ras_sysfs_remove_all(adev); | |
| return 0; | |
| } | |
| /* ras fs end */ | |
| /* ih begin */ | |
| static void amdgpu_ras_interrupt_handler(struct ras_manager *obj) | |
| { | |
| struct ras_ih_data *data = &obj->ih_data; | |
| struct amdgpu_iv_entry entry; | |
| int ret; | |
| struct ras_err_data err_data = {0, 0, 0, NULL}; | |
| while (data->rptr != data->wptr) { | |
| rmb(); | |
| memcpy(&entry, &data->ring[data->rptr], | |
| data->element_size); | |
| wmb(); | |
| data->rptr = (data->aligned_element_size + | |
| data->rptr) % data->ring_size; | |
| /* Let IP handle its data, maybe we need get the output | |
| * from the callback to udpate the error type/count, etc | |
| */ | |
| if (data->cb) { | |
| ret = data->cb(obj->adev, &err_data, &entry); | |
| /* ue will trigger an interrupt, and in that case | |
| * we need do a reset to recovery the whole system. | |
| * But leave IP do that recovery, here we just dispatch | |
| * the error. | |
| */ | |
| if (ret == AMDGPU_RAS_SUCCESS) { | |
| /* these counts could be left as 0 if | |
| * some blocks do not count error number | |
| */ | |
| obj->err_data.ue_count += err_data.ue_count; | |
| obj->err_data.ce_count += err_data.ce_count; | |
| } | |
| } | |
| } | |
| } | |
| static void amdgpu_ras_interrupt_process_handler(struct work_struct *work) | |
| { | |
| struct ras_ih_data *data = | |
| container_of(work, struct ras_ih_data, ih_work); | |
| struct ras_manager *obj = | |
| container_of(data, struct ras_manager, ih_data); | |
| amdgpu_ras_interrupt_handler(obj); | |
| } | |
| int amdgpu_ras_interrupt_dispatch(struct amdgpu_device *adev, | |
| struct ras_dispatch_if *info) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &info->head); | |
| struct ras_ih_data *data = &obj->ih_data; | |
| if (!obj) | |
| return -EINVAL; | |
| if (data->inuse == 0) | |
| return 0; | |
| /* Might be overflow... */ | |
| memcpy(&data->ring[data->wptr], info->entry, | |
| data->element_size); | |
| wmb(); | |
| data->wptr = (data->aligned_element_size + | |
| data->wptr) % data->ring_size; | |
| schedule_work(&data->ih_work); | |
| return 0; | |
| } | |
| int amdgpu_ras_interrupt_remove_handler(struct amdgpu_device *adev, | |
| struct ras_ih_if *info) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &info->head); | |
| struct ras_ih_data *data; | |
| if (!obj) | |
| return -EINVAL; | |
| data = &obj->ih_data; | |
| if (data->inuse == 0) | |
| return 0; | |
| cancel_work_sync(&data->ih_work); | |
| kfree(data->ring); | |
| memset(data, 0, sizeof(*data)); | |
| put_obj(obj); | |
| return 0; | |
| } | |
| int amdgpu_ras_interrupt_add_handler(struct amdgpu_device *adev, | |
| struct ras_ih_if *info) | |
| { | |
| struct ras_manager *obj = amdgpu_ras_find_obj(adev, &info->head); | |
| struct ras_ih_data *data; | |
| if (!obj) { | |
| /* in case we registe the IH before enable ras feature */ | |
| obj = amdgpu_ras_create_obj(adev, &info->head); | |
| if (!obj) | |
| return -EINVAL; | |
| } else | |
| get_obj(obj); | |
| data = &obj->ih_data; | |
| /* add the callback.etc */ | |
| *data = (struct ras_ih_data) { | |
| .inuse = 0, | |
| .cb = info->cb, | |
| .element_size = sizeof(struct amdgpu_iv_entry), | |
| .rptr = 0, | |
| .wptr = 0, | |
| }; | |
| INIT_WORK(&data->ih_work, amdgpu_ras_interrupt_process_handler); | |
| data->aligned_element_size = ALIGN(data->element_size, 8); | |
| /* the ring can store 64 iv entries. */ | |
| data->ring_size = 64 * data->aligned_element_size; | |
| data->ring = kmalloc(data->ring_size, GFP_KERNEL); | |
| if (!data->ring) { | |
| put_obj(obj); | |
| return -ENOMEM; | |
| } | |
| /* IH is ready */ | |
| data->inuse = 1; | |
| return 0; | |
| } | |
| static int amdgpu_ras_interrupt_remove_all(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj, *tmp; | |
| list_for_each_entry_safe(obj, tmp, &con->head, node) { | |
| struct ras_ih_if info = { | |
| .head = obj->head, | |
| }; | |
| amdgpu_ras_interrupt_remove_handler(adev, &info); | |
| } | |
| return 0; | |
| } | |
| /* ih end */ | |
| /* traversal all IPs except NBIO to query error counter */ | |
| static void amdgpu_ras_log_on_err_counter(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj; | |
| if (!con) | |
| return; | |
| list_for_each_entry(obj, &con->head, node) { | |
| struct ras_query_if info = { | |
| .head = obj->head, | |
| }; | |
| /* | |
| * PCIE_BIF IP has one different isr by ras controller | |
| * interrupt, the specific ras counter query will be | |
| * done in that isr. So skip such block from common | |
| * sync flood interrupt isr calling. | |
| */ | |
| if (info.head.block == AMDGPU_RAS_BLOCK__PCIE_BIF) | |
| continue; | |
| amdgpu_ras_error_query(adev, &info); | |
| } | |
| } | |
| /* Parse RdRspStatus and WrRspStatus */ | |
| void amdgpu_ras_error_status_query(struct amdgpu_device *adev, | |
| struct ras_query_if *info) | |
| { | |
| /* | |
| * Only two block need to query read/write | |
| * RspStatus at current state | |
| */ | |
| switch (info->head.block) { | |
| case AMDGPU_RAS_BLOCK__GFX: | |
| if (adev->gfx.funcs->query_ras_error_status) | |
| adev->gfx.funcs->query_ras_error_status(adev); | |
| break; | |
| case AMDGPU_RAS_BLOCK__MMHUB: | |
| if (adev->mmhub.funcs->query_ras_error_status) | |
| adev->mmhub.funcs->query_ras_error_status(adev); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void amdgpu_ras_query_err_status(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj; | |
| if (!con) | |
| return; | |
| list_for_each_entry(obj, &con->head, node) { | |
| struct ras_query_if info = { | |
| .head = obj->head, | |
| }; | |
| amdgpu_ras_error_status_query(adev, &info); | |
| } | |
| } | |
| /* recovery begin */ | |
| /* return 0 on success. | |
| * caller need free bps. | |
| */ | |
| static int amdgpu_ras_badpages_read(struct amdgpu_device *adev, | |
| struct ras_badpage **bps, unsigned int *count) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data; | |
| int i = 0; | |
| int ret = 0; | |
| if (!con || !con->eh_data || !bps || !count) | |
| return -EINVAL; | |
| mutex_lock(&con->recovery_lock); | |
| data = con->eh_data; | |
| if (!data || data->count == 0) { | |
| *bps = NULL; | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| *bps = kmalloc(sizeof(struct ras_badpage) * data->count, GFP_KERNEL); | |
| if (!*bps) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| for (; i < data->count; i++) { | |
| (*bps)[i] = (struct ras_badpage){ | |
| .bp = data->bps[i].retired_page, | |
| .size = AMDGPU_GPU_PAGE_SIZE, | |
| .flags = AMDGPU_RAS_RETIRE_PAGE_RESERVED, | |
| }; | |
| if (data->last_reserved <= i) | |
| (*bps)[i].flags = AMDGPU_RAS_RETIRE_PAGE_PENDING; | |
| else if (data->bps_bo[i] == NULL) | |
| (*bps)[i].flags = AMDGPU_RAS_RETIRE_PAGE_FAULT; | |
| } | |
| *count = data->count; | |
| out: | |
| mutex_unlock(&con->recovery_lock); | |
| return ret; | |
| } | |
| static void amdgpu_ras_do_recovery(struct work_struct *work) | |
| { | |
| struct amdgpu_ras *ras = | |
| container_of(work, struct amdgpu_ras, recovery_work); | |
| struct amdgpu_device *remote_adev = NULL; | |
| struct amdgpu_device *adev = ras->adev; | |
| struct list_head device_list, *device_list_handle = NULL; | |
| if (!ras->disable_ras_err_cnt_harvest) { | |
| struct amdgpu_hive_info *hive = amdgpu_get_xgmi_hive(adev); | |
| /* Build list of devices to query RAS related errors */ | |
| if (hive && adev->gmc.xgmi.num_physical_nodes > 1) { | |
| device_list_handle = &hive->device_list; | |
| } else { | |
| INIT_LIST_HEAD(&device_list); | |
| list_add_tail(&adev->gmc.xgmi.head, &device_list); | |
| device_list_handle = &device_list; | |
| } | |
| list_for_each_entry(remote_adev, | |
| device_list_handle, gmc.xgmi.head) { | |
| amdgpu_ras_query_err_status(remote_adev); | |
| amdgpu_ras_log_on_err_counter(remote_adev); | |
| } | |
| amdgpu_put_xgmi_hive(hive); | |
| } | |
| if (amdgpu_device_should_recover_gpu(ras->adev)) | |
| amdgpu_device_gpu_recover(ras->adev, NULL); | |
| atomic_set(&ras->in_recovery, 0); | |
| } | |
| /* alloc/realloc bps array */ | |
| static int amdgpu_ras_realloc_eh_data_space(struct amdgpu_device *adev, | |
| struct ras_err_handler_data *data, int pages) | |
| { | |
| unsigned int old_space = data->count + data->space_left; | |
| unsigned int new_space = old_space + pages; | |
| unsigned int align_space = ALIGN(new_space, 512); | |
| void *bps = kmalloc(align_space * sizeof(*data->bps), GFP_KERNEL); | |
| struct amdgpu_bo **bps_bo = | |
| kmalloc(align_space * sizeof(*data->bps_bo), GFP_KERNEL); | |
| if (!bps || !bps_bo) { | |
| kfree(bps); | |
| kfree(bps_bo); | |
| return -ENOMEM; | |
| } | |
| if (data->bps) { | |
| memcpy(bps, data->bps, | |
| data->count * sizeof(*data->bps)); | |
| kfree(data->bps); | |
| } | |
| if (data->bps_bo) { | |
| memcpy(bps_bo, data->bps_bo, | |
| data->count * sizeof(*data->bps_bo)); | |
| kfree(data->bps_bo); | |
| } | |
| data->bps = bps; | |
| data->bps_bo = bps_bo; | |
| data->space_left += align_space - old_space; | |
| return 0; | |
| } | |
| /* it deal with vram only. */ | |
| int amdgpu_ras_add_bad_pages(struct amdgpu_device *adev, | |
| struct eeprom_table_record *bps, int pages) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data; | |
| int ret = 0; | |
| if (!con || !con->eh_data || !bps || pages <= 0) | |
| return 0; | |
| mutex_lock(&con->recovery_lock); | |
| data = con->eh_data; | |
| if (!data) | |
| goto out; | |
| if (data->space_left <= pages) | |
| if (amdgpu_ras_realloc_eh_data_space(adev, data, pages)) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| memcpy(&data->bps[data->count], bps, pages * sizeof(*data->bps)); | |
| data->count += pages; | |
| data->space_left -= pages; | |
| out: | |
| mutex_unlock(&con->recovery_lock); | |
| return ret; | |
| } | |
| /* | |
| * write error record array to eeprom, the function should be | |
| * protected by recovery_lock | |
| */ | |
| static int amdgpu_ras_save_bad_pages(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data; | |
| struct amdgpu_ras_eeprom_control *control; | |
| int save_count; | |
| if (!con || !con->eh_data) | |
| return 0; | |
| control = &con->eeprom_control; | |
| data = con->eh_data; | |
| save_count = data->count - control->num_recs; | |
| /* only new entries are saved */ | |
| if (save_count > 0) { | |
| if (amdgpu_ras_eeprom_process_recods(control, | |
| &data->bps[control->num_recs], | |
| true, | |
| save_count)) { | |
| dev_err(adev->dev, "Failed to save EEPROM table data!"); | |
| return -EIO; | |
| } | |
| dev_info(adev->dev, "Saved %d pages to EEPROM table.\n", save_count); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * read error record array in eeprom and reserve enough space for | |
| * storing new bad pages | |
| */ | |
| static int amdgpu_ras_load_bad_pages(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras_eeprom_control *control = | |
| &adev->psp.ras.ras->eeprom_control; | |
| struct eeprom_table_record *bps = NULL; | |
| int ret = 0; | |
| /* no bad page record, skip eeprom access */ | |
| if (!control->num_recs || (amdgpu_bad_page_threshold == 0)) | |
| return ret; | |
| bps = kcalloc(control->num_recs, sizeof(*bps), GFP_KERNEL); | |
| if (!bps) | |
| return -ENOMEM; | |
| if (amdgpu_ras_eeprom_process_recods(control, bps, false, | |
| control->num_recs)) { | |
| dev_err(adev->dev, "Failed to load EEPROM table records!"); | |
| ret = -EIO; | |
| goto out; | |
| } | |
| ret = amdgpu_ras_add_bad_pages(adev, bps, control->num_recs); | |
| out: | |
| kfree(bps); | |
| return ret; | |
| } | |
| /* | |
| * check if an address belongs to bad page | |
| * | |
| * Note: this check is only for umc block | |
| */ | |
| static bool amdgpu_ras_check_bad_page(struct amdgpu_device *adev, | |
| uint64_t addr) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data; | |
| int i; | |
| bool ret = false; | |
| if (!con || !con->eh_data) | |
| return ret; | |
| mutex_lock(&con->recovery_lock); | |
| data = con->eh_data; | |
| if (!data) | |
| goto out; | |
| addr >>= AMDGPU_GPU_PAGE_SHIFT; | |
| for (i = 0; i < data->count; i++) | |
| if (addr == data->bps[i].retired_page) { | |
| ret = true; | |
| goto out; | |
| } | |
| out: | |
| mutex_unlock(&con->recovery_lock); | |
| return ret; | |
| } | |
| static void amdgpu_ras_validate_threshold(struct amdgpu_device *adev, | |
| uint32_t max_length) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| int tmp_threshold = amdgpu_bad_page_threshold; | |
| u64 val; | |
| /* | |
| * Justification of value bad_page_cnt_threshold in ras structure | |
| * | |
| * Generally, -1 <= amdgpu_bad_page_threshold <= max record length | |
| * in eeprom, and introduce two scenarios accordingly. | |
| * | |
| * Bad page retirement enablement: | |
| * - If amdgpu_bad_page_threshold = -1, | |
| * bad_page_cnt_threshold = typical value by formula. | |
| * | |
| * - When the value from user is 0 < amdgpu_bad_page_threshold < | |
| * max record length in eeprom, use it directly. | |
| * | |
| * Bad page retirement disablement: | |
| * - If amdgpu_bad_page_threshold = 0, bad page retirement | |
| * functionality is disabled, and bad_page_cnt_threshold will | |
| * take no effect. | |
| */ | |
| if (tmp_threshold < -1) | |
| tmp_threshold = -1; | |
| else if (tmp_threshold > max_length) | |
| tmp_threshold = max_length; | |
| if (tmp_threshold == -1) { | |
| val = adev->gmc.mc_vram_size; | |
| do_div(val, RAS_BAD_PAGE_RATE); | |
| con->bad_page_cnt_threshold = min(lower_32_bits(val), | |
| max_length); | |
| } else { | |
| con->bad_page_cnt_threshold = tmp_threshold; | |
| } | |
| } | |
| /* called in gpu recovery/init */ | |
| int amdgpu_ras_reserve_bad_pages(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data; | |
| uint64_t bp; | |
| struct amdgpu_bo *bo = NULL; | |
| int i, ret = 0; | |
| /* Not reserve bad page when amdgpu_bad_page_threshold == 0. */ | |
| if (!con || !con->eh_data || (amdgpu_bad_page_threshold == 0)) | |
| return 0; | |
| mutex_lock(&con->recovery_lock); | |
| data = con->eh_data; | |
| if (!data) | |
| goto out; | |
| /* reserve vram at driver post stage. */ | |
| for (i = data->last_reserved; i < data->count; i++) { | |
| bp = data->bps[i].retired_page; | |
| /* There are two cases of reserve error should be ignored: | |
| * 1) a ras bad page has been allocated (used by someone); | |
| * 2) a ras bad page has been reserved (duplicate error injection | |
| * for one page); | |
| */ | |
| if (amdgpu_bo_create_kernel_at(adev, bp << AMDGPU_GPU_PAGE_SHIFT, | |
| AMDGPU_GPU_PAGE_SIZE, | |
| AMDGPU_GEM_DOMAIN_VRAM, | |
| &bo, NULL)) | |
| dev_warn(adev->dev, "RAS WARN: reserve vram for " | |
| "retired page %llx fail\n", bp); | |
| data->bps_bo[i] = bo; | |
| data->last_reserved = i + 1; | |
| bo = NULL; | |
| } | |
| /* continue to save bad pages to eeprom even reesrve_vram fails */ | |
| ret = amdgpu_ras_save_bad_pages(adev); | |
| out: | |
| mutex_unlock(&con->recovery_lock); | |
| return ret; | |
| } | |
| /* called when driver unload */ | |
| static int amdgpu_ras_release_bad_pages(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data; | |
| struct amdgpu_bo *bo; | |
| int i; | |
| if (!con || !con->eh_data) | |
| return 0; | |
| mutex_lock(&con->recovery_lock); | |
| data = con->eh_data; | |
| if (!data) | |
| goto out; | |
| for (i = data->last_reserved - 1; i >= 0; i--) { | |
| bo = data->bps_bo[i]; | |
| amdgpu_bo_free_kernel(&bo, NULL, NULL); | |
| data->bps_bo[i] = bo; | |
| data->last_reserved = i; | |
| } | |
| out: | |
| mutex_unlock(&con->recovery_lock); | |
| return 0; | |
| } | |
| int amdgpu_ras_recovery_init(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data **data; | |
| uint32_t max_eeprom_records_len = 0; | |
| bool exc_err_limit = false; | |
| int ret; | |
| if (con) | |
| data = &con->eh_data; | |
| else | |
| return 0; | |
| *data = kmalloc(sizeof(**data), GFP_KERNEL | __GFP_ZERO); | |
| if (!*data) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| mutex_init(&con->recovery_lock); | |
| INIT_WORK(&con->recovery_work, amdgpu_ras_do_recovery); | |
| atomic_set(&con->in_recovery, 0); | |
| con->adev = adev; | |
| max_eeprom_records_len = amdgpu_ras_eeprom_get_record_max_length(); | |
| amdgpu_ras_validate_threshold(adev, max_eeprom_records_len); | |
| ret = amdgpu_ras_eeprom_init(&con->eeprom_control, &exc_err_limit); | |
| /* | |
| * This calling fails when exc_err_limit is true or | |
| * ret != 0. | |
| */ | |
| if (exc_err_limit || ret) | |
| goto free; | |
| if (con->eeprom_control.num_recs) { | |
| ret = amdgpu_ras_load_bad_pages(adev); | |
| if (ret) | |
| goto free; | |
| ret = amdgpu_ras_reserve_bad_pages(adev); | |
| if (ret) | |
| goto release; | |
| } | |
| return 0; | |
| release: | |
| amdgpu_ras_release_bad_pages(adev); | |
| free: | |
| kfree((*data)->bps); | |
| kfree((*data)->bps_bo); | |
| kfree(*data); | |
| con->eh_data = NULL; | |
| out: | |
| dev_warn(adev->dev, "Failed to initialize ras recovery!\n"); | |
| /* | |
| * Except error threshold exceeding case, other failure cases in this | |
| * function would not fail amdgpu driver init. | |
| */ | |
| if (!exc_err_limit) | |
| ret = 0; | |
| else | |
| ret = -EINVAL; | |
| return ret; | |
| } | |
| static int amdgpu_ras_recovery_fini(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_err_handler_data *data = con->eh_data; | |
| /* recovery_init failed to init it, fini is useless */ | |
| if (!data) | |
| return 0; | |
| cancel_work_sync(&con->recovery_work); | |
| amdgpu_ras_release_bad_pages(adev); | |
| mutex_lock(&con->recovery_lock); | |
| con->eh_data = NULL; | |
| kfree(data->bps); | |
| kfree(data->bps_bo); | |
| kfree(data); | |
| mutex_unlock(&con->recovery_lock); | |
| return 0; | |
| } | |
| /* recovery end */ | |
| /* return 0 if ras will reset gpu and repost.*/ | |
| int amdgpu_ras_request_reset_on_boot(struct amdgpu_device *adev, | |
| unsigned int block) | |
| { | |
| struct amdgpu_ras *ras = amdgpu_ras_get_context(adev); | |
| if (!ras) | |
| return -EINVAL; | |
| ras->flags |= AMDGPU_RAS_FLAG_INIT_NEED_RESET; | |
| return 0; | |
| } | |
| static int amdgpu_ras_check_asic_type(struct amdgpu_device *adev) | |
| { | |
| if (adev->asic_type != CHIP_VEGA10 && | |
| adev->asic_type != CHIP_VEGA20 && | |
| adev->asic_type != CHIP_ARCTURUS && | |
| adev->asic_type != CHIP_SIENNA_CICHLID) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| /* | |
| * check hardware's ras ability which will be saved in hw_supported. | |
| * if hardware does not support ras, we can skip some ras initializtion and | |
| * forbid some ras operations from IP. | |
| * if software itself, say boot parameter, limit the ras ability. We still | |
| * need allow IP do some limited operations, like disable. In such case, | |
| * we have to initialize ras as normal. but need check if operation is | |
| * allowed or not in each function. | |
| */ | |
| static void amdgpu_ras_check_supported(struct amdgpu_device *adev, | |
| uint32_t *hw_supported, uint32_t *supported) | |
| { | |
| *hw_supported = 0; | |
| *supported = 0; | |
| if (amdgpu_sriov_vf(adev) || !adev->is_atom_fw || | |
| amdgpu_ras_check_asic_type(adev)) | |
| return; | |
| if (amdgpu_atomfirmware_mem_ecc_supported(adev)) { | |
| dev_info(adev->dev, "HBM ECC is active.\n"); | |
| *hw_supported |= (1 << AMDGPU_RAS_BLOCK__UMC | | |
| 1 << AMDGPU_RAS_BLOCK__DF); | |
| } else | |
| dev_info(adev->dev, "HBM ECC is not presented.\n"); | |
| if (amdgpu_atomfirmware_sram_ecc_supported(adev)) { | |
| dev_info(adev->dev, "SRAM ECC is active.\n"); | |
| *hw_supported |= ~(1 << AMDGPU_RAS_BLOCK__UMC | | |
| 1 << AMDGPU_RAS_BLOCK__DF); | |
| } else | |
| dev_info(adev->dev, "SRAM ECC is not presented.\n"); | |
| /* hw_supported needs to be aligned with RAS block mask. */ | |
| *hw_supported &= AMDGPU_RAS_BLOCK_MASK; | |
| *supported = amdgpu_ras_enable == 0 ? | |
| 0 : *hw_supported & amdgpu_ras_mask; | |
| adev->ras_features = *supported; | |
| } | |
| int amdgpu_ras_init(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| int r; | |
| if (con) | |
| return 0; | |
| con = kmalloc(sizeof(struct amdgpu_ras) + | |
| sizeof(struct ras_manager) * AMDGPU_RAS_BLOCK_COUNT, | |
| GFP_KERNEL|__GFP_ZERO); | |
| if (!con) | |
| return -ENOMEM; | |
| con->objs = (struct ras_manager *)(con + 1); | |
| amdgpu_ras_set_context(adev, con); | |
| amdgpu_ras_check_supported(adev, &con->hw_supported, | |
| &con->supported); | |
| if (!con->hw_supported || (adev->asic_type == CHIP_VEGA10)) { | |
| r = 0; | |
| goto release_con; | |
| } | |
| con->features = 0; | |
| INIT_LIST_HEAD(&con->head); | |
| /* Might need get this flag from vbios. */ | |
| con->flags = RAS_DEFAULT_FLAGS; | |
| if (adev->nbio.funcs->init_ras_controller_interrupt) { | |
| r = adev->nbio.funcs->init_ras_controller_interrupt(adev); | |
| if (r) | |
| goto release_con; | |
| } | |
| if (adev->nbio.funcs->init_ras_err_event_athub_interrupt) { | |
| r = adev->nbio.funcs->init_ras_err_event_athub_interrupt(adev); | |
| if (r) | |
| goto release_con; | |
| } | |
| if (amdgpu_ras_fs_init(adev)) { | |
| r = -EINVAL; | |
| goto release_con; | |
| } | |
| dev_info(adev->dev, "RAS INFO: ras initialized successfully, " | |
| "hardware ability[%x] ras_mask[%x]\n", | |
| con->hw_supported, con->supported); | |
| return 0; | |
| release_con: | |
| amdgpu_ras_set_context(adev, NULL); | |
| kfree(con); | |
| return r; | |
| } | |
| /* helper function to handle common stuff in ip late init phase */ | |
| int amdgpu_ras_late_init(struct amdgpu_device *adev, | |
| struct ras_common_if *ras_block, | |
| struct ras_fs_if *fs_info, | |
| struct ras_ih_if *ih_info) | |
| { | |
| int r; | |
| /* disable RAS feature per IP block if it is not supported */ | |
| if (!amdgpu_ras_is_supported(adev, ras_block->block)) { | |
| amdgpu_ras_feature_enable_on_boot(adev, ras_block, 0); | |
| return 0; | |
| } | |
| r = amdgpu_ras_feature_enable_on_boot(adev, ras_block, 1); | |
| if (r) { | |
| if (r == -EAGAIN) { | |
| /* request gpu reset. will run again */ | |
| amdgpu_ras_request_reset_on_boot(adev, | |
| ras_block->block); | |
| return 0; | |
| } else if (adev->in_suspend || amdgpu_in_reset(adev)) { | |
| /* in resume phase, if fail to enable ras, | |
| * clean up all ras fs nodes, and disable ras */ | |
| goto cleanup; | |
| } else | |
| return r; | |
| } | |
| /* in resume phase, no need to create ras fs node */ | |
| if (adev->in_suspend || amdgpu_in_reset(adev)) | |
| return 0; | |
| if (ih_info->cb) { | |
| r = amdgpu_ras_interrupt_add_handler(adev, ih_info); | |
| if (r) | |
| goto interrupt; | |
| } | |
| r = amdgpu_ras_sysfs_create(adev, fs_info); | |
| if (r) | |
| goto sysfs; | |
| return 0; | |
| cleanup: | |
| amdgpu_ras_sysfs_remove(adev, ras_block); | |
| sysfs: | |
| if (ih_info->cb) | |
| amdgpu_ras_interrupt_remove_handler(adev, ih_info); | |
| interrupt: | |
| amdgpu_ras_feature_enable(adev, ras_block, 0); | |
| return r; | |
| } | |
| /* helper function to remove ras fs node and interrupt handler */ | |
| void amdgpu_ras_late_fini(struct amdgpu_device *adev, | |
| struct ras_common_if *ras_block, | |
| struct ras_ih_if *ih_info) | |
| { | |
| if (!ras_block || !ih_info) | |
| return; | |
| amdgpu_ras_sysfs_remove(adev, ras_block); | |
| if (ih_info->cb) | |
| amdgpu_ras_interrupt_remove_handler(adev, ih_info); | |
| amdgpu_ras_feature_enable(adev, ras_block, 0); | |
| } | |
| /* do some init work after IP late init as dependence. | |
| * and it runs in resume/gpu reset/booting up cases. | |
| */ | |
| void amdgpu_ras_resume(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| struct ras_manager *obj, *tmp; | |
| if (!con) | |
| return; | |
| if (con->flags & AMDGPU_RAS_FLAG_INIT_BY_VBIOS) { | |
| /* Set up all other IPs which are not implemented. There is a | |
| * tricky thing that IP's actual ras error type should be | |
| * MULTI_UNCORRECTABLE, but as driver does not handle it, so | |
| * ERROR_NONE make sense anyway. | |
| */ | |
| amdgpu_ras_enable_all_features(adev, 1); | |
| /* We enable ras on all hw_supported block, but as boot | |
| * parameter might disable some of them and one or more IP has | |
| * not implemented yet. So we disable them on behalf. | |
| */ | |
| list_for_each_entry_safe(obj, tmp, &con->head, node) { | |
| if (!amdgpu_ras_is_supported(adev, obj->head.block)) { | |
| amdgpu_ras_feature_enable(adev, &obj->head, 0); | |
| /* there should be no any reference. */ | |
| WARN_ON(alive_obj(obj)); | |
| } | |
| } | |
| } | |
| if (con->flags & AMDGPU_RAS_FLAG_INIT_NEED_RESET) { | |
| con->flags &= ~AMDGPU_RAS_FLAG_INIT_NEED_RESET; | |
| /* setup ras obj state as disabled. | |
| * for init_by_vbios case. | |
| * if we want to enable ras, just enable it in a normal way. | |
| * If we want do disable it, need setup ras obj as enabled, | |
| * then issue another TA disable cmd. | |
| * See feature_enable_on_boot | |
| */ | |
| amdgpu_ras_disable_all_features(adev, 1); | |
| amdgpu_ras_reset_gpu(adev); | |
| } | |
| } | |
| void amdgpu_ras_suspend(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| if (!con) | |
| return; | |
| amdgpu_ras_disable_all_features(adev, 0); | |
| /* Make sure all ras objects are disabled. */ | |
| if (con->features) | |
| amdgpu_ras_disable_all_features(adev, 1); | |
| } | |
| /* do some fini work before IP fini as dependence */ | |
| int amdgpu_ras_pre_fini(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| if (!con) | |
| return 0; | |
| /* Need disable ras on all IPs here before ip [hw/sw]fini */ | |
| amdgpu_ras_disable_all_features(adev, 0); | |
| amdgpu_ras_recovery_fini(adev); | |
| return 0; | |
| } | |
| int amdgpu_ras_fini(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| if (!con) | |
| return 0; | |
| amdgpu_ras_fs_fini(adev); | |
| amdgpu_ras_interrupt_remove_all(adev); | |
| WARN(con->features, "Feature mask is not cleared"); | |
| if (con->features) | |
| amdgpu_ras_disable_all_features(adev, 1); | |
| amdgpu_ras_set_context(adev, NULL); | |
| kfree(con); | |
| return 0; | |
| } | |
| void amdgpu_ras_global_ras_isr(struct amdgpu_device *adev) | |
| { | |
| uint32_t hw_supported, supported; | |
| amdgpu_ras_check_supported(adev, &hw_supported, &supported); | |
| if (!hw_supported) | |
| return; | |
| if (atomic_cmpxchg(&amdgpu_ras_in_intr, 0, 1) == 0) { | |
| dev_info(adev->dev, "uncorrectable hardware error" | |
| "(ERREVENT_ATHUB_INTERRUPT) detected!\n"); | |
| amdgpu_ras_reset_gpu(adev); | |
| } | |
| } | |
| bool amdgpu_ras_need_emergency_restart(struct amdgpu_device *adev) | |
| { | |
| if (adev->asic_type == CHIP_VEGA20 && | |
| adev->pm.fw_version <= 0x283400) { | |
| return !(amdgpu_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) && | |
| amdgpu_ras_intr_triggered(); | |
| } | |
| return false; | |
| } | |
| bool amdgpu_ras_check_err_threshold(struct amdgpu_device *adev) | |
| { | |
| struct amdgpu_ras *con = amdgpu_ras_get_context(adev); | |
| bool exc_err_limit = false; | |
| if (con && (amdgpu_bad_page_threshold != 0)) | |
| amdgpu_ras_eeprom_check_err_threshold(&con->eeprom_control, | |
| &exc_err_limit); | |
| /* | |
| * We are only interested in variable exc_err_limit, | |
| * as it says if GPU is in bad state or not. | |
| */ | |
| return exc_err_limit; | |
| } |