| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Tegra host1x driver | |
| * | |
| * Copyright (c) 2010-2013, NVIDIA Corporation. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/io.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of.h> | |
| #include <linux/slab.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/host1x.h> | |
| #undef CREATE_TRACE_POINTS | |
| #include "bus.h" | |
| #include "channel.h" | |
| #include "debug.h" | |
| #include "dev.h" | |
| #include "intr.h" | |
| #include "hw/host1x01.h" | |
| #include "hw/host1x02.h" | |
| #include "hw/host1x04.h" | |
| #include "hw/host1x05.h" | |
| #include "hw/host1x06.h" | |
| #include "hw/host1x07.h" | |
| void host1x_hypervisor_writel(struct host1x *host1x, u32 v, u32 r) | |
| { | |
| writel(v, host1x->hv_regs + r); | |
| } | |
| u32 host1x_hypervisor_readl(struct host1x *host1x, u32 r) | |
| { | |
| return readl(host1x->hv_regs + r); | |
| } | |
| void host1x_sync_writel(struct host1x *host1x, u32 v, u32 r) | |
| { | |
| void __iomem *sync_regs = host1x->regs + host1x->info->sync_offset; | |
| writel(v, sync_regs + r); | |
| } | |
| u32 host1x_sync_readl(struct host1x *host1x, u32 r) | |
| { | |
| void __iomem *sync_regs = host1x->regs + host1x->info->sync_offset; | |
| return readl(sync_regs + r); | |
| } | |
| void host1x_ch_writel(struct host1x_channel *ch, u32 v, u32 r) | |
| { | |
| writel(v, ch->regs + r); | |
| } | |
| u32 host1x_ch_readl(struct host1x_channel *ch, u32 r) | |
| { | |
| return readl(ch->regs + r); | |
| } | |
| static const struct host1x_info host1x01_info = { | |
| .nb_channels = 8, | |
| .nb_pts = 32, | |
| .nb_mlocks = 16, | |
| .nb_bases = 8, | |
| .init = host1x01_init, | |
| .sync_offset = 0x3000, | |
| .dma_mask = DMA_BIT_MASK(32), | |
| .has_wide_gather = false, | |
| .has_hypervisor = false, | |
| .num_sid_entries = 0, | |
| .sid_table = NULL, | |
| }; | |
| static const struct host1x_info host1x02_info = { | |
| .nb_channels = 9, | |
| .nb_pts = 32, | |
| .nb_mlocks = 16, | |
| .nb_bases = 12, | |
| .init = host1x02_init, | |
| .sync_offset = 0x3000, | |
| .dma_mask = DMA_BIT_MASK(32), | |
| .has_wide_gather = false, | |
| .has_hypervisor = false, | |
| .num_sid_entries = 0, | |
| .sid_table = NULL, | |
| }; | |
| static const struct host1x_info host1x04_info = { | |
| .nb_channels = 12, | |
| .nb_pts = 192, | |
| .nb_mlocks = 16, | |
| .nb_bases = 64, | |
| .init = host1x04_init, | |
| .sync_offset = 0x2100, | |
| .dma_mask = DMA_BIT_MASK(34), | |
| .has_wide_gather = false, | |
| .has_hypervisor = false, | |
| .num_sid_entries = 0, | |
| .sid_table = NULL, | |
| }; | |
| static const struct host1x_info host1x05_info = { | |
| .nb_channels = 14, | |
| .nb_pts = 192, | |
| .nb_mlocks = 16, | |
| .nb_bases = 64, | |
| .init = host1x05_init, | |
| .sync_offset = 0x2100, | |
| .dma_mask = DMA_BIT_MASK(34), | |
| .has_wide_gather = false, | |
| .has_hypervisor = false, | |
| .num_sid_entries = 0, | |
| .sid_table = NULL, | |
| }; | |
| static const struct host1x_sid_entry tegra186_sid_table[] = { | |
| { | |
| /* VIC */ | |
| .base = 0x1af0, | |
| .offset = 0x30, | |
| .limit = 0x34 | |
| }, | |
| }; | |
| static const struct host1x_info host1x06_info = { | |
| .nb_channels = 63, | |
| .nb_pts = 576, | |
| .nb_mlocks = 24, | |
| .nb_bases = 16, | |
| .init = host1x06_init, | |
| .sync_offset = 0x0, | |
| .dma_mask = DMA_BIT_MASK(40), | |
| .has_wide_gather = true, | |
| .has_hypervisor = true, | |
| .num_sid_entries = ARRAY_SIZE(tegra186_sid_table), | |
| .sid_table = tegra186_sid_table, | |
| }; | |
| static const struct host1x_sid_entry tegra194_sid_table[] = { | |
| { | |
| /* VIC */ | |
| .base = 0x1af0, | |
| .offset = 0x30, | |
| .limit = 0x34 | |
| }, | |
| }; | |
| static const struct host1x_info host1x07_info = { | |
| .nb_channels = 63, | |
| .nb_pts = 704, | |
| .nb_mlocks = 32, | |
| .nb_bases = 0, | |
| .init = host1x07_init, | |
| .sync_offset = 0x0, | |
| .dma_mask = DMA_BIT_MASK(40), | |
| .has_wide_gather = true, | |
| .has_hypervisor = true, | |
| .num_sid_entries = ARRAY_SIZE(tegra194_sid_table), | |
| .sid_table = tegra194_sid_table, | |
| }; | |
| static const struct of_device_id host1x_of_match[] = { | |
| { .compatible = "nvidia,tegra194-host1x", .data = &host1x07_info, }, | |
| { .compatible = "nvidia,tegra186-host1x", .data = &host1x06_info, }, | |
| { .compatible = "nvidia,tegra210-host1x", .data = &host1x05_info, }, | |
| { .compatible = "nvidia,tegra124-host1x", .data = &host1x04_info, }, | |
| { .compatible = "nvidia,tegra114-host1x", .data = &host1x02_info, }, | |
| { .compatible = "nvidia,tegra30-host1x", .data = &host1x01_info, }, | |
| { .compatible = "nvidia,tegra20-host1x", .data = &host1x01_info, }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, host1x_of_match); | |
| static void host1x_setup_sid_table(struct host1x *host) | |
| { | |
| const struct host1x_info *info = host->info; | |
| unsigned int i; | |
| for (i = 0; i < info->num_sid_entries; i++) { | |
| const struct host1x_sid_entry *entry = &info->sid_table[i]; | |
| host1x_hypervisor_writel(host, entry->offset, entry->base); | |
| host1x_hypervisor_writel(host, entry->limit, entry->base + 4); | |
| } | |
| } | |
| static bool host1x_wants_iommu(struct host1x *host1x) | |
| { | |
| /* | |
| * If we support addressing a maximum of 32 bits of physical memory | |
| * and if the host1x firewall is enabled, there's no need to enable | |
| * IOMMU support. This can happen for example on Tegra20, Tegra30 | |
| * and Tegra114. | |
| * | |
| * Tegra124 and later can address up to 34 bits of physical memory and | |
| * many platforms come equipped with more than 2 GiB of system memory, | |
| * which requires crossing the 4 GiB boundary. But there's a catch: on | |
| * SoCs before Tegra186 (i.e. Tegra124 and Tegra210), the host1x can | |
| * only address up to 32 bits of memory in GATHER opcodes, which means | |
| * that command buffers need to either be in the first 2 GiB of system | |
| * memory (which could quickly lead to memory exhaustion), or command | |
| * buffers need to be treated differently from other buffers (which is | |
| * not possible with the current ABI). | |
| * | |
| * A third option is to use the IOMMU in these cases to make sure all | |
| * buffers will be mapped into a 32-bit IOVA space that host1x can | |
| * address. This allows all of the system memory to be used and works | |
| * within the limitations of the host1x on these SoCs. | |
| * | |
| * In summary, default to enable IOMMU on Tegra124 and later. For any | |
| * of the earlier SoCs, only use the IOMMU for additional safety when | |
| * the host1x firewall is disabled. | |
| */ | |
| if (host1x->info->dma_mask <= DMA_BIT_MASK(32)) { | |
| if (IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL)) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static struct iommu_domain *host1x_iommu_attach(struct host1x *host) | |
| { | |
| struct iommu_domain *domain = iommu_get_domain_for_dev(host->dev); | |
| int err; | |
| /* | |
| * We may not always want to enable IOMMU support (for example if the | |
| * host1x firewall is already enabled and we don't support addressing | |
| * more than 32 bits of physical memory), so check for that first. | |
| * | |
| * Similarly, if host1x is already attached to an IOMMU (via the DMA | |
| * API), don't try to attach again. | |
| */ | |
| if (!host1x_wants_iommu(host) || domain) | |
| return domain; | |
| host->group = iommu_group_get(host->dev); | |
| if (host->group) { | |
| struct iommu_domain_geometry *geometry; | |
| dma_addr_t start, end; | |
| unsigned long order; | |
| err = iova_cache_get(); | |
| if (err < 0) | |
| goto put_group; | |
| host->domain = iommu_domain_alloc(&platform_bus_type); | |
| if (!host->domain) { | |
| err = -ENOMEM; | |
| goto put_cache; | |
| } | |
| err = iommu_attach_group(host->domain, host->group); | |
| if (err) { | |
| if (err == -ENODEV) | |
| err = 0; | |
| goto free_domain; | |
| } | |
| geometry = &host->domain->geometry; | |
| start = geometry->aperture_start & host->info->dma_mask; | |
| end = geometry->aperture_end & host->info->dma_mask; | |
| order = __ffs(host->domain->pgsize_bitmap); | |
| init_iova_domain(&host->iova, 1UL << order, start >> order); | |
| host->iova_end = end; | |
| domain = host->domain; | |
| } | |
| return domain; | |
| free_domain: | |
| iommu_domain_free(host->domain); | |
| host->domain = NULL; | |
| put_cache: | |
| iova_cache_put(); | |
| put_group: | |
| iommu_group_put(host->group); | |
| host->group = NULL; | |
| return ERR_PTR(err); | |
| } | |
| static int host1x_iommu_init(struct host1x *host) | |
| { | |
| u64 mask = host->info->dma_mask; | |
| struct iommu_domain *domain; | |
| int err; | |
| domain = host1x_iommu_attach(host); | |
| if (IS_ERR(domain)) { | |
| err = PTR_ERR(domain); | |
| dev_err(host->dev, "failed to attach to IOMMU: %d\n", err); | |
| return err; | |
| } | |
| /* | |
| * If we're not behind an IOMMU make sure we don't get push buffers | |
| * that are allocated outside of the range addressable by the GATHER | |
| * opcode. | |
| * | |
| * Newer generations of Tegra (Tegra186 and later) support a wide | |
| * variant of the GATHER opcode that allows addressing more bits. | |
| */ | |
| if (!domain && !host->info->has_wide_gather) | |
| mask = DMA_BIT_MASK(32); | |
| err = dma_coerce_mask_and_coherent(host->dev, mask); | |
| if (err < 0) { | |
| dev_err(host->dev, "failed to set DMA mask: %d\n", err); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void host1x_iommu_exit(struct host1x *host) | |
| { | |
| if (host->domain) { | |
| put_iova_domain(&host->iova); | |
| iommu_detach_group(host->domain, host->group); | |
| iommu_domain_free(host->domain); | |
| host->domain = NULL; | |
| iova_cache_put(); | |
| iommu_group_put(host->group); | |
| host->group = NULL; | |
| } | |
| } | |
| static int host1x_probe(struct platform_device *pdev) | |
| { | |
| struct host1x *host; | |
| struct resource *regs, *hv_regs = NULL; | |
| int syncpt_irq; | |
| int err; | |
| host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); | |
| if (!host) | |
| return -ENOMEM; | |
| host->info = of_device_get_match_data(&pdev->dev); | |
| if (host->info->has_hypervisor) { | |
| regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vm"); | |
| if (!regs) { | |
| dev_err(&pdev->dev, "failed to get vm registers\n"); | |
| return -ENXIO; | |
| } | |
| hv_regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, | |
| "hypervisor"); | |
| if (!hv_regs) { | |
| dev_err(&pdev->dev, | |
| "failed to get hypervisor registers\n"); | |
| return -ENXIO; | |
| } | |
| } else { | |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!regs) { | |
| dev_err(&pdev->dev, "failed to get registers\n"); | |
| return -ENXIO; | |
| } | |
| } | |
| syncpt_irq = platform_get_irq(pdev, 0); | |
| if (syncpt_irq < 0) | |
| return syncpt_irq; | |
| mutex_init(&host->devices_lock); | |
| INIT_LIST_HEAD(&host->devices); | |
| INIT_LIST_HEAD(&host->list); | |
| host->dev = &pdev->dev; | |
| /* set common host1x device data */ | |
| platform_set_drvdata(pdev, host); | |
| host->regs = devm_ioremap_resource(&pdev->dev, regs); | |
| if (IS_ERR(host->regs)) | |
| return PTR_ERR(host->regs); | |
| if (host->info->has_hypervisor) { | |
| host->hv_regs = devm_ioremap_resource(&pdev->dev, hv_regs); | |
| if (IS_ERR(host->hv_regs)) | |
| return PTR_ERR(host->hv_regs); | |
| } | |
| host->dev->dma_parms = &host->dma_parms; | |
| dma_set_max_seg_size(host->dev, UINT_MAX); | |
| if (host->info->init) { | |
| err = host->info->init(host); | |
| if (err) | |
| return err; | |
| } | |
| host->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(host->clk)) { | |
| err = PTR_ERR(host->clk); | |
| if (err != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, "failed to get clock: %d\n", err); | |
| return err; | |
| } | |
| host->rst = devm_reset_control_get(&pdev->dev, "host1x"); | |
| if (IS_ERR(host->rst)) { | |
| err = PTR_ERR(host->rst); | |
| dev_err(&pdev->dev, "failed to get reset: %d\n", err); | |
| return err; | |
| } | |
| err = host1x_iommu_init(host); | |
| if (err < 0) { | |
| dev_err(&pdev->dev, "failed to setup IOMMU: %d\n", err); | |
| return err; | |
| } | |
| err = host1x_channel_list_init(&host->channel_list, | |
| host->info->nb_channels); | |
| if (err) { | |
| dev_err(&pdev->dev, "failed to initialize channel list\n"); | |
| goto iommu_exit; | |
| } | |
| err = clk_prepare_enable(host->clk); | |
| if (err < 0) { | |
| dev_err(&pdev->dev, "failed to enable clock\n"); | |
| goto free_channels; | |
| } | |
| err = reset_control_deassert(host->rst); | |
| if (err < 0) { | |
| dev_err(&pdev->dev, "failed to deassert reset: %d\n", err); | |
| goto unprepare_disable; | |
| } | |
| err = host1x_syncpt_init(host); | |
| if (err) { | |
| dev_err(&pdev->dev, "failed to initialize syncpts\n"); | |
| goto reset_assert; | |
| } | |
| err = host1x_intr_init(host, syncpt_irq); | |
| if (err) { | |
| dev_err(&pdev->dev, "failed to initialize interrupts\n"); | |
| goto deinit_syncpt; | |
| } | |
| host1x_debug_init(host); | |
| if (host->info->has_hypervisor) | |
| host1x_setup_sid_table(host); | |
| err = host1x_register(host); | |
| if (err < 0) | |
| goto deinit_debugfs; | |
| err = devm_of_platform_populate(&pdev->dev); | |
| if (err < 0) | |
| goto unregister; | |
| return 0; | |
| unregister: | |
| host1x_unregister(host); | |
| deinit_debugfs: | |
| host1x_debug_deinit(host); | |
| host1x_intr_deinit(host); | |
| deinit_syncpt: | |
| host1x_syncpt_deinit(host); | |
| reset_assert: | |
| reset_control_assert(host->rst); | |
| unprepare_disable: | |
| clk_disable_unprepare(host->clk); | |
| free_channels: | |
| host1x_channel_list_free(&host->channel_list); | |
| iommu_exit: | |
| host1x_iommu_exit(host); | |
| return err; | |
| } | |
| static int host1x_remove(struct platform_device *pdev) | |
| { | |
| struct host1x *host = platform_get_drvdata(pdev); | |
| host1x_unregister(host); | |
| host1x_debug_deinit(host); | |
| host1x_intr_deinit(host); | |
| host1x_syncpt_deinit(host); | |
| reset_control_assert(host->rst); | |
| clk_disable_unprepare(host->clk); | |
| host1x_iommu_exit(host); | |
| return 0; | |
| } | |
| static struct platform_driver tegra_host1x_driver = { | |
| .driver = { | |
| .name = "tegra-host1x", | |
| .of_match_table = host1x_of_match, | |
| }, | |
| .probe = host1x_probe, | |
| .remove = host1x_remove, | |
| }; | |
| static struct platform_driver * const drivers[] = { | |
| &tegra_host1x_driver, | |
| &tegra_mipi_driver, | |
| }; | |
| static int __init tegra_host1x_init(void) | |
| { | |
| int err; | |
| err = bus_register(&host1x_bus_type); | |
| if (err < 0) | |
| return err; | |
| err = platform_register_drivers(drivers, ARRAY_SIZE(drivers)); | |
| if (err < 0) | |
| bus_unregister(&host1x_bus_type); | |
| return err; | |
| } | |
| module_init(tegra_host1x_init); | |
| static void __exit tegra_host1x_exit(void) | |
| { | |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); | |
| bus_unregister(&host1x_bus_type); | |
| } | |
| module_exit(tegra_host1x_exit); | |
| /** | |
| * host1x_get_dma_mask() - query the supported DMA mask for host1x | |
| * @host1x: host1x instance | |
| * | |
| * Note that this returns the supported DMA mask for host1x, which can be | |
| * different from the applicable DMA mask under certain circumstances. | |
| */ | |
| u64 host1x_get_dma_mask(struct host1x *host1x) | |
| { | |
| return host1x->info->dma_mask; | |
| } | |
| EXPORT_SYMBOL(host1x_get_dma_mask); | |
| MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); | |
| MODULE_AUTHOR("Terje Bergstrom <tbergstrom@nvidia.com>"); | |
| MODULE_DESCRIPTION("Host1x driver for Tegra products"); | |
| MODULE_LICENSE("GPL"); |