| /* |
| * Copyright © 2006-2007 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| */ |
| |
| #include <acpi/video.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/intel-iommu.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/dma-resv.h> |
| #include <linux/slab.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_atomic_uapi.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_dp_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_rect.h> |
| |
| #include "display/intel_audio.h" |
| #include "display/intel_crt.h" |
| #include "display/intel_ddi.h" |
| #include "display/intel_display_debugfs.h" |
| #include "display/intel_dp.h" |
| #include "display/intel_dp_mst.h" |
| #include "display/intel_dpll.h" |
| #include "display/intel_dpll_mgr.h" |
| #include "display/intel_drrs.h" |
| #include "display/intel_dsi.h" |
| #include "display/intel_dvo.h" |
| #include "display/intel_fb.h" |
| #include "display/intel_gmbus.h" |
| #include "display/intel_hdmi.h" |
| #include "display/intel_lvds.h" |
| #include "display/intel_sdvo.h" |
| #include "display/intel_snps_phy.h" |
| #include "display/intel_tv.h" |
| #include "display/intel_vdsc.h" |
| #include "display/intel_vrr.h" |
| |
| #include "gem/i915_gem_lmem.h" |
| #include "gem/i915_gem_object.h" |
| |
| #include "gt/gen8_ppgtt.h" |
| |
| #include "pxp/intel_pxp.h" |
| |
| #include "g4x_dp.h" |
| #include "g4x_hdmi.h" |
| #include "i915_drv.h" |
| #include "intel_acpi.h" |
| #include "intel_atomic.h" |
| #include "intel_atomic_plane.h" |
| #include "intel_bw.h" |
| #include "intel_cdclk.h" |
| #include "intel_color.h" |
| #include "intel_crtc.h" |
| #include "intel_de.h" |
| #include "intel_display_types.h" |
| #include "intel_dmc.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_dpt.h" |
| #include "intel_fbc.h" |
| #include "intel_fbdev.h" |
| #include "intel_fdi.h" |
| #include "intel_fifo_underrun.h" |
| #include "intel_frontbuffer.h" |
| #include "intel_hdcp.h" |
| #include "intel_hotplug.h" |
| #include "intel_overlay.h" |
| #include "intel_panel.h" |
| #include "intel_pcode.h" |
| #include "intel_pipe_crc.h" |
| #include "intel_plane_initial.h" |
| #include "intel_pm.h" |
| #include "intel_pps.h" |
| #include "intel_psr.h" |
| #include "intel_quirks.h" |
| #include "intel_sbi.h" |
| #include "intel_sprite.h" |
| #include "intel_tc.h" |
| #include "intel_vga.h" |
| #include "i9xx_plane.h" |
| #include "skl_scaler.h" |
| #include "skl_universal_plane.h" |
| #include "vlv_sideband.h" |
| |
| static void i9xx_crtc_clock_get(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config); |
| static void ilk_pch_clock_get(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config); |
| |
| static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state); |
| static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state); |
| static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_state, |
| const struct intel_link_m_n *m_n, |
| const struct intel_link_m_n *m2_n2); |
| static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state); |
| static void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state); |
| static void hsw_set_transconf(const struct intel_crtc_state *crtc_state); |
| static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state); |
| static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state); |
| static void intel_modeset_setup_hw_state(struct drm_device *dev, |
| struct drm_modeset_acquire_ctx *ctx); |
| |
| /** |
| * intel_update_watermarks - update FIFO watermark values based on current modes |
| * @dev_priv: i915 device |
| * |
| * Calculate watermark values for the various WM regs based on current mode |
| * and plane configuration. |
| * |
| * There are several cases to deal with here: |
| * - normal (i.e. non-self-refresh) |
| * - self-refresh (SR) mode |
| * - lines are large relative to FIFO size (buffer can hold up to 2) |
| * - lines are small relative to FIFO size (buffer can hold more than 2 |
| * lines), so need to account for TLB latency |
| * |
| * The normal calculation is: |
| * watermark = dotclock * bytes per pixel * latency |
| * where latency is platform & configuration dependent (we assume pessimal |
| * values here). |
| * |
| * The SR calculation is: |
| * watermark = (trunc(latency/line time)+1) * surface width * |
| * bytes per pixel |
| * where |
| * line time = htotal / dotclock |
| * surface width = hdisplay for normal plane and 64 for cursor |
| * and latency is assumed to be high, as above. |
| * |
| * The final value programmed to the register should always be rounded up, |
| * and include an extra 2 entries to account for clock crossings. |
| * |
| * We don't use the sprite, so we can ignore that. And on Crestline we have |
| * to set the non-SR watermarks to 8. |
| */ |
| static void intel_update_watermarks(struct drm_i915_private *dev_priv) |
| { |
| if (dev_priv->wm_disp->update_wm) |
| dev_priv->wm_disp->update_wm(dev_priv); |
| } |
| |
| static int intel_compute_pipe_wm(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| if (dev_priv->wm_disp->compute_pipe_wm) |
| return dev_priv->wm_disp->compute_pipe_wm(state, crtc); |
| return 0; |
| } |
| |
| static int intel_compute_intermediate_wm(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| if (!dev_priv->wm_disp->compute_intermediate_wm) |
| return 0; |
| if (drm_WARN_ON(&dev_priv->drm, |
| !dev_priv->wm_disp->compute_pipe_wm)) |
| return 0; |
| return dev_priv->wm_disp->compute_intermediate_wm(state, crtc); |
| } |
| |
| static bool intel_initial_watermarks(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| if (dev_priv->wm_disp->initial_watermarks) { |
| dev_priv->wm_disp->initial_watermarks(state, crtc); |
| return true; |
| } |
| return false; |
| } |
| |
| static void intel_atomic_update_watermarks(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| if (dev_priv->wm_disp->atomic_update_watermarks) |
| dev_priv->wm_disp->atomic_update_watermarks(state, crtc); |
| } |
| |
| static void intel_optimize_watermarks(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| if (dev_priv->wm_disp->optimize_watermarks) |
| dev_priv->wm_disp->optimize_watermarks(state, crtc); |
| } |
| |
| static int intel_compute_global_watermarks(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| if (dev_priv->wm_disp->compute_global_watermarks) |
| return dev_priv->wm_disp->compute_global_watermarks(state); |
| return 0; |
| } |
| |
| /* returns HPLL frequency in kHz */ |
| int vlv_get_hpll_vco(struct drm_i915_private *dev_priv) |
| { |
| int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 }; |
| |
| /* Obtain SKU information */ |
| hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) & |
| CCK_FUSE_HPLL_FREQ_MASK; |
| |
| return vco_freq[hpll_freq] * 1000; |
| } |
| |
| int vlv_get_cck_clock(struct drm_i915_private *dev_priv, |
| const char *name, u32 reg, int ref_freq) |
| { |
| u32 val; |
| int divider; |
| |
| val = vlv_cck_read(dev_priv, reg); |
| divider = val & CCK_FREQUENCY_VALUES; |
| |
| drm_WARN(&dev_priv->drm, (val & CCK_FREQUENCY_STATUS) != |
| (divider << CCK_FREQUENCY_STATUS_SHIFT), |
| "%s change in progress\n", name); |
| |
| return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1); |
| } |
| |
| int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, |
| const char *name, u32 reg) |
| { |
| int hpll; |
| |
| vlv_cck_get(dev_priv); |
| |
| if (dev_priv->hpll_freq == 0) |
| dev_priv->hpll_freq = vlv_get_hpll_vco(dev_priv); |
| |
| hpll = vlv_get_cck_clock(dev_priv, name, reg, dev_priv->hpll_freq); |
| |
| vlv_cck_put(dev_priv); |
| |
| return hpll; |
| } |
| |
| static void intel_update_czclk(struct drm_i915_private *dev_priv) |
| { |
| if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))) |
| return; |
| |
| dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk", |
| CCK_CZ_CLOCK_CONTROL); |
| |
| drm_dbg(&dev_priv->drm, "CZ clock rate: %d kHz\n", |
| dev_priv->czclk_freq); |
| } |
| |
| static bool is_hdr_mode(const struct intel_crtc_state *crtc_state) |
| { |
| return (crtc_state->active_planes & |
| ~(icl_hdr_plane_mask() | BIT(PLANE_CURSOR))) == 0; |
| } |
| |
| /* WA Display #0827: Gen9:all */ |
| static void |
| skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable) |
| { |
| if (enable) |
| intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), |
| intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) | DUPS1_GATING_DIS | DUPS2_GATING_DIS); |
| else |
| intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), |
| intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~(DUPS1_GATING_DIS | DUPS2_GATING_DIS)); |
| } |
| |
| /* Wa_2006604312:icl,ehl */ |
| static void |
| icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe, |
| bool enable) |
| { |
| if (enable) |
| intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), |
| intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) | DPFR_GATING_DIS); |
| else |
| intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), |
| intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~DPFR_GATING_DIS); |
| } |
| |
| /* Wa_1604331009:icl,jsl,ehl */ |
| static void |
| icl_wa_cursorclkgating(struct drm_i915_private *dev_priv, enum pipe pipe, |
| bool enable) |
| { |
| intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(pipe), CURSOR_GATING_DIS, |
| enable ? CURSOR_GATING_DIS : 0); |
| } |
| |
| static bool |
| is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->master_transcoder != INVALID_TRANSCODER; |
| } |
| |
| static bool |
| is_trans_port_sync_master(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->sync_mode_slaves_mask != 0; |
| } |
| |
| bool |
| is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state) |
| { |
| return is_trans_port_sync_master(crtc_state) || |
| is_trans_port_sync_slave(crtc_state); |
| } |
| |
| static bool pipe_scanline_is_moving(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| i915_reg_t reg = PIPEDSL(pipe); |
| u32 line1, line2; |
| u32 line_mask; |
| |
| if (DISPLAY_VER(dev_priv) == 2) |
| line_mask = DSL_LINEMASK_GEN2; |
| else |
| line_mask = DSL_LINEMASK_GEN3; |
| |
| line1 = intel_de_read(dev_priv, reg) & line_mask; |
| msleep(5); |
| line2 = intel_de_read(dev_priv, reg) & line_mask; |
| |
| return line1 != line2; |
| } |
| |
| static void wait_for_pipe_scanline_moving(struct intel_crtc *crtc, bool state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* Wait for the display line to settle/start moving */ |
| if (wait_for(pipe_scanline_is_moving(dev_priv, pipe) == state, 100)) |
| drm_err(&dev_priv->drm, |
| "pipe %c scanline %s wait timed out\n", |
| pipe_name(pipe), onoff(state)); |
| } |
| |
| static void intel_wait_for_pipe_scanline_stopped(struct intel_crtc *crtc) |
| { |
| wait_for_pipe_scanline_moving(crtc, false); |
| } |
| |
| static void intel_wait_for_pipe_scanline_moving(struct intel_crtc *crtc) |
| { |
| wait_for_pipe_scanline_moving(crtc, true); |
| } |
| |
| static void |
| intel_wait_for_pipe_off(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (DISPLAY_VER(dev_priv) >= 4) { |
| enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; |
| i915_reg_t reg = PIPECONF(cpu_transcoder); |
| |
| /* Wait for the Pipe State to go off */ |
| if (intel_de_wait_for_clear(dev_priv, reg, |
| I965_PIPECONF_ACTIVE, 100)) |
| drm_WARN(&dev_priv->drm, 1, |
| "pipe_off wait timed out\n"); |
| } else { |
| intel_wait_for_pipe_scanline_stopped(crtc); |
| } |
| } |
| |
| void assert_transcoder(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder, bool state) |
| { |
| bool cur_state; |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| |
| /* we keep both pipes enabled on 830 */ |
| if (IS_I830(dev_priv)) |
| state = true; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); |
| if (wakeref) { |
| u32 val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder)); |
| cur_state = !!(val & PIPECONF_ENABLE); |
| |
| intel_display_power_put(dev_priv, power_domain, wakeref); |
| } else { |
| cur_state = false; |
| } |
| |
| I915_STATE_WARN(cur_state != state, |
| "transcoder %s assertion failure (expected %s, current %s)\n", |
| transcoder_name(cpu_transcoder), |
| onoff(state), onoff(cur_state)); |
| } |
| |
| static void assert_plane(struct intel_plane *plane, bool state) |
| { |
| enum pipe pipe; |
| bool cur_state; |
| |
| cur_state = plane->get_hw_state(plane, &pipe); |
| |
| I915_STATE_WARN(cur_state != state, |
| "%s assertion failure (expected %s, current %s)\n", |
| plane->base.name, onoff(state), onoff(cur_state)); |
| } |
| |
| #define assert_plane_enabled(p) assert_plane(p, true) |
| #define assert_plane_disabled(p) assert_plane(p, false) |
| |
| static void assert_planes_disabled(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) |
| assert_plane_disabled(plane); |
| } |
| |
| void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| u32 val; |
| bool enabled; |
| |
| val = intel_de_read(dev_priv, PCH_TRANSCONF(pipe)); |
| enabled = !!(val & TRANS_ENABLE); |
| I915_STATE_WARN(enabled, |
| "transcoder assertion failed, should be off on pipe %c but is still active\n", |
| pipe_name(pipe)); |
| } |
| |
| static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, |
| enum pipe pipe, enum port port, |
| i915_reg_t dp_reg) |
| { |
| enum pipe port_pipe; |
| bool state; |
| |
| state = g4x_dp_port_enabled(dev_priv, dp_reg, port, &port_pipe); |
| |
| I915_STATE_WARN(state && port_pipe == pipe, |
| "PCH DP %c enabled on transcoder %c, should be disabled\n", |
| port_name(port), pipe_name(pipe)); |
| |
| I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B, |
| "IBX PCH DP %c still using transcoder B\n", |
| port_name(port)); |
| } |
| |
| static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, |
| enum pipe pipe, enum port port, |
| i915_reg_t hdmi_reg) |
| { |
| enum pipe port_pipe; |
| bool state; |
| |
| state = intel_sdvo_port_enabled(dev_priv, hdmi_reg, &port_pipe); |
| |
| I915_STATE_WARN(state && port_pipe == pipe, |
| "PCH HDMI %c enabled on transcoder %c, should be disabled\n", |
| port_name(port), pipe_name(pipe)); |
| |
| I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B, |
| "IBX PCH HDMI %c still using transcoder B\n", |
| port_name(port)); |
| } |
| |
| static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| enum pipe port_pipe; |
| |
| assert_pch_dp_disabled(dev_priv, pipe, PORT_B, PCH_DP_B); |
| assert_pch_dp_disabled(dev_priv, pipe, PORT_C, PCH_DP_C); |
| assert_pch_dp_disabled(dev_priv, pipe, PORT_D, PCH_DP_D); |
| |
| I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) && |
| port_pipe == pipe, |
| "PCH VGA enabled on transcoder %c, should be disabled\n", |
| pipe_name(pipe)); |
| |
| I915_STATE_WARN(intel_lvds_port_enabled(dev_priv, PCH_LVDS, &port_pipe) && |
| port_pipe == pipe, |
| "PCH LVDS enabled on transcoder %c, should be disabled\n", |
| pipe_name(pipe)); |
| |
| /* PCH SDVOB multiplex with HDMIB */ |
| assert_pch_hdmi_disabled(dev_priv, pipe, PORT_B, PCH_HDMIB); |
| assert_pch_hdmi_disabled(dev_priv, pipe, PORT_C, PCH_HDMIC); |
| assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID); |
| } |
| |
| void vlv_wait_port_ready(struct drm_i915_private *dev_priv, |
| struct intel_digital_port *dig_port, |
| unsigned int expected_mask) |
| { |
| u32 port_mask; |
| i915_reg_t dpll_reg; |
| |
| switch (dig_port->base.port) { |
| case PORT_B: |
| port_mask = DPLL_PORTB_READY_MASK; |
| dpll_reg = DPLL(0); |
| break; |
| case PORT_C: |
| port_mask = DPLL_PORTC_READY_MASK; |
| dpll_reg = DPLL(0); |
| expected_mask <<= 4; |
| break; |
| case PORT_D: |
| port_mask = DPLL_PORTD_READY_MASK; |
| dpll_reg = DPIO_PHY_STATUS; |
| break; |
| default: |
| BUG(); |
| } |
| |
| if (intel_de_wait_for_register(dev_priv, dpll_reg, |
| port_mask, expected_mask, 1000)) |
| drm_WARN(&dev_priv->drm, 1, |
| "timed out waiting for [ENCODER:%d:%s] port ready: got 0x%x, expected 0x%x\n", |
| dig_port->base.base.base.id, dig_port->base.base.name, |
| intel_de_read(dev_priv, dpll_reg) & port_mask, |
| expected_mask); |
| } |
| |
| static void ilk_enable_pch_transcoder(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| i915_reg_t reg; |
| u32 val, pipeconf_val; |
| |
| /* Make sure PCH DPLL is enabled */ |
| assert_shared_dpll_enabled(dev_priv, crtc_state->shared_dpll); |
| |
| /* FDI must be feeding us bits for PCH ports */ |
| assert_fdi_tx_enabled(dev_priv, pipe); |
| assert_fdi_rx_enabled(dev_priv, pipe); |
| |
| if (HAS_PCH_CPT(dev_priv)) { |
| reg = TRANS_CHICKEN2(pipe); |
| val = intel_de_read(dev_priv, reg); |
| /* |
| * Workaround: Set the timing override bit |
| * before enabling the pch transcoder. |
| */ |
| val |= TRANS_CHICKEN2_TIMING_OVERRIDE; |
| /* Configure frame start delay to match the CPU */ |
| val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK; |
| val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, reg, val); |
| } |
| |
| reg = PCH_TRANSCONF(pipe); |
| val = intel_de_read(dev_priv, reg); |
| pipeconf_val = intel_de_read(dev_priv, PIPECONF(pipe)); |
| |
| if (HAS_PCH_IBX(dev_priv)) { |
| /* Configure frame start delay to match the CPU */ |
| val &= ~TRANS_FRAME_START_DELAY_MASK; |
| val |= TRANS_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| |
| /* |
| * Make the BPC in transcoder be consistent with |
| * that in pipeconf reg. For HDMI we must use 8bpc |
| * here for both 8bpc and 12bpc. |
| */ |
| val &= ~PIPECONF_BPC_MASK; |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) |
| val |= PIPECONF_8BPC; |
| else |
| val |= pipeconf_val & PIPECONF_BPC_MASK; |
| } |
| |
| val &= ~TRANS_INTERLACE_MASK; |
| if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) { |
| if (HAS_PCH_IBX(dev_priv) && |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| val |= TRANS_LEGACY_INTERLACED_ILK; |
| else |
| val |= TRANS_INTERLACED; |
| } else { |
| val |= TRANS_PROGRESSIVE; |
| } |
| |
| intel_de_write(dev_priv, reg, val | TRANS_ENABLE); |
| if (intel_de_wait_for_set(dev_priv, reg, TRANS_STATE_ENABLE, 100)) |
| drm_err(&dev_priv->drm, "failed to enable transcoder %c\n", |
| pipe_name(pipe)); |
| } |
| |
| static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| u32 val, pipeconf_val; |
| |
| /* FDI must be feeding us bits for PCH ports */ |
| assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder); |
| assert_fdi_rx_enabled(dev_priv, PIPE_A); |
| |
| val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A)); |
| /* Workaround: set timing override bit. */ |
| val |= TRANS_CHICKEN2_TIMING_OVERRIDE; |
| /* Configure frame start delay to match the CPU */ |
| val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK; |
| val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val); |
| |
| val = TRANS_ENABLE; |
| pipeconf_val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder)); |
| |
| if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) == |
| PIPECONF_INTERLACED_ILK) |
| val |= TRANS_INTERLACED; |
| else |
| val |= TRANS_PROGRESSIVE; |
| |
| intel_de_write(dev_priv, LPT_TRANSCONF, val); |
| if (intel_de_wait_for_set(dev_priv, LPT_TRANSCONF, |
| TRANS_STATE_ENABLE, 100)) |
| drm_err(&dev_priv->drm, "Failed to enable PCH transcoder\n"); |
| } |
| |
| static void ilk_disable_pch_transcoder(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| i915_reg_t reg; |
| u32 val; |
| |
| /* FDI relies on the transcoder */ |
| assert_fdi_tx_disabled(dev_priv, pipe); |
| assert_fdi_rx_disabled(dev_priv, pipe); |
| |
| /* Ports must be off as well */ |
| assert_pch_ports_disabled(dev_priv, pipe); |
| |
| reg = PCH_TRANSCONF(pipe); |
| val = intel_de_read(dev_priv, reg); |
| val &= ~TRANS_ENABLE; |
| intel_de_write(dev_priv, reg, val); |
| /* wait for PCH transcoder off, transcoder state */ |
| if (intel_de_wait_for_clear(dev_priv, reg, TRANS_STATE_ENABLE, 50)) |
| drm_err(&dev_priv->drm, "failed to disable transcoder %c\n", |
| pipe_name(pipe)); |
| |
| if (HAS_PCH_CPT(dev_priv)) { |
| /* Workaround: Clear the timing override chicken bit again. */ |
| reg = TRANS_CHICKEN2(pipe); |
| val = intel_de_read(dev_priv, reg); |
| val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE; |
| intel_de_write(dev_priv, reg, val); |
| } |
| } |
| |
| void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv) |
| { |
| u32 val; |
| |
| val = intel_de_read(dev_priv, LPT_TRANSCONF); |
| val &= ~TRANS_ENABLE; |
| intel_de_write(dev_priv, LPT_TRANSCONF, val); |
| /* wait for PCH transcoder off, transcoder state */ |
| if (intel_de_wait_for_clear(dev_priv, LPT_TRANSCONF, |
| TRANS_STATE_ENABLE, 50)) |
| drm_err(&dev_priv->drm, "Failed to disable PCH transcoder\n"); |
| |
| /* Workaround: clear timing override bit. */ |
| val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A)); |
| val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE; |
| intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val); |
| } |
| |
| enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (HAS_PCH_LPT(dev_priv)) |
| return PIPE_A; |
| else |
| return crtc->pipe; |
| } |
| |
| void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder; |
| enum pipe pipe = crtc->pipe; |
| i915_reg_t reg; |
| u32 val; |
| |
| drm_dbg_kms(&dev_priv->drm, "enabling pipe %c\n", pipe_name(pipe)); |
| |
| assert_planes_disabled(crtc); |
| |
| /* |
| * A pipe without a PLL won't actually be able to drive bits from |
| * a plane. On ILK+ the pipe PLLs are integrated, so we don't |
| * need the check. |
| */ |
| if (HAS_GMCH(dev_priv)) { |
| if (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI)) |
| assert_dsi_pll_enabled(dev_priv); |
| else |
| assert_pll_enabled(dev_priv, pipe); |
| } else { |
| if (new_crtc_state->has_pch_encoder) { |
| /* if driving the PCH, we need FDI enabled */ |
| assert_fdi_rx_pll_enabled(dev_priv, |
| intel_crtc_pch_transcoder(crtc)); |
| assert_fdi_tx_pll_enabled(dev_priv, |
| (enum pipe) cpu_transcoder); |
| } |
| /* FIXME: assert CPU port conditions for SNB+ */ |
| } |
| |
| /* Wa_22012358565:adl-p */ |
| if (DISPLAY_VER(dev_priv) == 13) |
| intel_de_rmw(dev_priv, PIPE_ARB_CTL(pipe), |
| 0, PIPE_ARB_USE_PROG_SLOTS); |
| |
| reg = PIPECONF(cpu_transcoder); |
| val = intel_de_read(dev_priv, reg); |
| if (val & PIPECONF_ENABLE) { |
| /* we keep both pipes enabled on 830 */ |
| drm_WARN_ON(&dev_priv->drm, !IS_I830(dev_priv)); |
| return; |
| } |
| |
| intel_de_write(dev_priv, reg, val | PIPECONF_ENABLE); |
| intel_de_posting_read(dev_priv, reg); |
| |
| /* |
| * Until the pipe starts PIPEDSL reads will return a stale value, |
| * which causes an apparent vblank timestamp jump when PIPEDSL |
| * resets to its proper value. That also messes up the frame count |
| * when it's derived from the timestamps. So let's wait for the |
| * pipe to start properly before we call drm_crtc_vblank_on() |
| */ |
| if (intel_crtc_max_vblank_count(new_crtc_state) == 0) |
| intel_wait_for_pipe_scanline_moving(crtc); |
| } |
| |
| void intel_disable_transcoder(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; |
| enum pipe pipe = crtc->pipe; |
| i915_reg_t reg; |
| u32 val; |
| |
| drm_dbg_kms(&dev_priv->drm, "disabling pipe %c\n", pipe_name(pipe)); |
| |
| /* |
| * Make sure planes won't keep trying to pump pixels to us, |
| * or we might hang the display. |
| */ |
| assert_planes_disabled(crtc); |
| |
| reg = PIPECONF(cpu_transcoder); |
| val = intel_de_read(dev_priv, reg); |
| if ((val & PIPECONF_ENABLE) == 0) |
| return; |
| |
| /* |
| * Double wide has implications for planes |
| * so best keep it disabled when not needed. |
| */ |
| if (old_crtc_state->double_wide) |
| val &= ~PIPECONF_DOUBLE_WIDE; |
| |
| /* Don't disable pipe or pipe PLLs if needed */ |
| if (!IS_I830(dev_priv)) |
| val &= ~PIPECONF_ENABLE; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| intel_de_rmw(dev_priv, CHICKEN_TRANS(cpu_transcoder), |
| FECSTALL_DIS_DPTSTREAM_DPTTG, 0); |
| |
| intel_de_write(dev_priv, reg, val); |
| if ((val & PIPECONF_ENABLE) == 0) |
| intel_wait_for_pipe_off(old_crtc_state); |
| } |
| |
| bool |
| intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info, |
| u64 modifier) |
| { |
| return info->is_yuv && |
| info->num_planes == (is_ccs_modifier(modifier) ? 4 : 2); |
| } |
| |
| unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info) |
| { |
| unsigned int size = 0; |
| int i; |
| |
| for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++) |
| size += rot_info->plane[i].dst_stride * rot_info->plane[i].width; |
| |
| return size; |
| } |
| |
| unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info) |
| { |
| unsigned int size = 0; |
| int i; |
| |
| for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++) { |
| unsigned int plane_size; |
| |
| plane_size = rem_info->plane[i].dst_stride * rem_info->plane[i].height; |
| if (plane_size == 0) |
| continue; |
| |
| if (rem_info->plane_alignment) |
| size = ALIGN(size, rem_info->plane_alignment); |
| |
| size += plane_size; |
| } |
| |
| return size; |
| } |
| |
| bool intel_plane_uses_fence(const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| struct drm_i915_private *dev_priv = to_i915(plane->base.dev); |
| |
| return DISPLAY_VER(dev_priv) < 4 || |
| (plane->has_fbc && |
| plane_state->view.gtt.type == I915_GGTT_VIEW_NORMAL); |
| } |
| |
| /* |
| * Convert the x/y offsets into a linear offset. |
| * Only valid with 0/180 degree rotation, which is fine since linear |
| * offset is only used with linear buffers on pre-hsw and tiled buffers |
| * with gen2/3, and 90/270 degree rotations isn't supported on any of them. |
| */ |
| u32 intel_fb_xy_to_linear(int x, int y, |
| const struct intel_plane_state *state, |
| int color_plane) |
| { |
| const struct drm_framebuffer *fb = state->hw.fb; |
| unsigned int cpp = fb->format->cpp[color_plane]; |
| unsigned int pitch = state->view.color_plane[color_plane].stride; |
| |
| return y * pitch + x * cpp; |
| } |
| |
| /* |
| * Add the x/y offsets derived from fb->offsets[] to the user |
| * specified plane src x/y offsets. The resulting x/y offsets |
| * specify the start of scanout from the beginning of the gtt mapping. |
| */ |
| void intel_add_fb_offsets(int *x, int *y, |
| const struct intel_plane_state *state, |
| int color_plane) |
| |
| { |
| *x += state->view.color_plane[color_plane].x; |
| *y += state->view.color_plane[color_plane].y; |
| } |
| |
| /* |
| * From the Sky Lake PRM: |
| * "The Color Control Surface (CCS) contains the compression status of |
| * the cache-line pairs. The compression state of the cache-line pair |
| * is specified by 2 bits in the CCS. Each CCS cache-line represents |
| * an area on the main surface of 16 x16 sets of 128 byte Y-tiled |
| * cache-line-pairs. CCS is always Y tiled." |
| * |
| * Since cache line pairs refers to horizontally adjacent cache lines, |
| * each cache line in the CCS corresponds to an area of 32x16 cache |
| * lines on the main surface. Since each pixel is 4 bytes, this gives |
| * us a ratio of one byte in the CCS for each 8x16 pixels in the |
| * main surface. |
| */ |
| static const struct drm_format_info skl_ccs_formats[] = { |
| { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, }, |
| { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, }, |
| { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, }, |
| { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, |
| .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, }, |
| }; |
| |
| /* |
| * Gen-12 compression uses 4 bits of CCS data for each cache line pair in the |
| * main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles |
| * in the main surface. With 4 byte pixels and each Y-tile having dimensions of |
| * 32x32 pixels, the ratio turns out to 1B in the CCS for every 2x32 pixels in |
| * the main surface. |
| */ |
| static const struct drm_format_info gen12_ccs_formats[] = { |
| { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| { .format = DRM_FORMAT_YUYV, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_YVYU, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_UYVY, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_VYUY, .num_planes = 2, |
| .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 2, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_XYUV8888, .num_planes = 2, |
| .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 }, |
| .hsub = 1, .vsub = 1, .is_yuv = true }, |
| { .format = DRM_FORMAT_NV12, .num_planes = 4, |
| .char_per_block = { 1, 2, 1, 1 }, .block_w = { 1, 1, 4, 4 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| { .format = DRM_FORMAT_P010, .num_planes = 4, |
| .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| { .format = DRM_FORMAT_P012, .num_planes = 4, |
| .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| { .format = DRM_FORMAT_P016, .num_planes = 4, |
| .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 }, |
| .hsub = 2, .vsub = 2, .is_yuv = true }, |
| }; |
| |
| /* |
| * Same as gen12_ccs_formats[] above, but with additional surface used |
| * to pass Clear Color information in plane 2 with 64 bits of data. |
| */ |
| static const struct drm_format_info gen12_ccs_cc_formats[] = { |
| { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, }, |
| { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 3, |
| .char_per_block = { 4, 1, 0 }, .block_w = { 1, 2, 2 }, .block_h = { 1, 1, 1 }, |
| .hsub = 1, .vsub = 1, .has_alpha = true }, |
| }; |
| |
| static const struct drm_format_info * |
| lookup_format_info(const struct drm_format_info formats[], |
| int num_formats, u32 format) |
| { |
| int i; |
| |
| for (i = 0; i < num_formats; i++) { |
| if (formats[i].format == format) |
| return &formats[i]; |
| } |
| |
| return NULL; |
| } |
| |
| static const struct drm_format_info * |
| intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd) |
| { |
| switch (cmd->modifier[0]) { |
| case I915_FORMAT_MOD_Y_TILED_CCS: |
| case I915_FORMAT_MOD_Yf_TILED_CCS: |
| return lookup_format_info(skl_ccs_formats, |
| ARRAY_SIZE(skl_ccs_formats), |
| cmd->pixel_format); |
| case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS: |
| case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS: |
| return lookup_format_info(gen12_ccs_formats, |
| ARRAY_SIZE(gen12_ccs_formats), |
| cmd->pixel_format); |
| case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC: |
| return lookup_format_info(gen12_ccs_cc_formats, |
| ARRAY_SIZE(gen12_ccs_cc_formats), |
| cmd->pixel_format); |
| default: |
| return NULL; |
| } |
| } |
| |
| u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv, |
| u32 pixel_format, u64 modifier) |
| { |
| struct intel_crtc *crtc; |
| struct intel_plane *plane; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return 0; |
| |
| /* |
| * We assume the primary plane for pipe A has |
| * the highest stride limits of them all, |
| * if in case pipe A is disabled, use the first pipe from pipe_mask. |
| */ |
| crtc = intel_get_first_crtc(dev_priv); |
| if (!crtc) |
| return 0; |
| |
| plane = to_intel_plane(crtc->base.primary); |
| |
| return plane->max_stride(plane, pixel_format, modifier, |
| DRM_MODE_ROTATE_0); |
| } |
| |
| static void |
| intel_set_plane_visible(struct intel_crtc_state *crtc_state, |
| struct intel_plane_state *plane_state, |
| bool visible) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| |
| plane_state->uapi.visible = visible; |
| |
| if (visible) |
| crtc_state->uapi.plane_mask |= drm_plane_mask(&plane->base); |
| else |
| crtc_state->uapi.plane_mask &= ~drm_plane_mask(&plane->base); |
| } |
| |
| static void fixup_plane_bitmasks(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| struct drm_plane *plane; |
| |
| /* |
| * Active_planes aliases if multiple "primary" or cursor planes |
| * have been used on the same (or wrong) pipe. plane_mask uses |
| * unique ids, hence we can use that to reconstruct active_planes. |
| */ |
| crtc_state->enabled_planes = 0; |
| crtc_state->active_planes = 0; |
| |
| drm_for_each_plane_mask(plane, &dev_priv->drm, |
| crtc_state->uapi.plane_mask) { |
| crtc_state->enabled_planes |= BIT(to_intel_plane(plane)->id); |
| crtc_state->active_planes |= BIT(to_intel_plane(plane)->id); |
| } |
| } |
| |
| void intel_plane_disable_noatomic(struct intel_crtc *crtc, |
| struct intel_plane *plane) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "Disabling [PLANE:%d:%s] on [CRTC:%d:%s]\n", |
| plane->base.base.id, plane->base.name, |
| crtc->base.base.id, crtc->base.name); |
| |
| intel_set_plane_visible(crtc_state, plane_state, false); |
| fixup_plane_bitmasks(crtc_state); |
| crtc_state->data_rate[plane->id] = 0; |
| crtc_state->min_cdclk[plane->id] = 0; |
| |
| if (plane->id == PLANE_PRIMARY) |
| hsw_disable_ips(crtc_state); |
| |
| /* |
| * Vblank time updates from the shadow to live plane control register |
| * are blocked if the memory self-refresh mode is active at that |
| * moment. So to make sure the plane gets truly disabled, disable |
| * first the self-refresh mode. The self-refresh enable bit in turn |
| * will be checked/applied by the HW only at the next frame start |
| * event which is after the vblank start event, so we need to have a |
| * wait-for-vblank between disabling the plane and the pipe. |
| */ |
| if (HAS_GMCH(dev_priv) && |
| intel_set_memory_cxsr(dev_priv, false)) |
| intel_wait_for_vblank(dev_priv, crtc->pipe); |
| |
| /* |
| * Gen2 reports pipe underruns whenever all planes are disabled. |
| * So disable underrun reporting before all the planes get disabled. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2 && !crtc_state->active_planes) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false); |
| |
| intel_disable_plane(plane, crtc_state); |
| intel_wait_for_vblank(dev_priv, crtc->pipe); |
| } |
| |
| unsigned int |
| intel_plane_fence_y_offset(const struct intel_plane_state *plane_state) |
| { |
| int x = 0, y = 0; |
| |
| intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0, |
| plane_state->view.color_plane[0].offset, 0); |
| |
| return y; |
| } |
| |
| static int |
| __intel_display_resume(struct drm_device *dev, |
| struct drm_atomic_state *state, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_crtc_state *crtc_state; |
| struct drm_crtc *crtc; |
| int i, ret; |
| |
| intel_modeset_setup_hw_state(dev, ctx); |
| intel_vga_redisable(to_i915(dev)); |
| |
| if (!state) |
| return 0; |
| |
| /* |
| * We've duplicated the state, pointers to the old state are invalid. |
| * |
| * Don't attempt to use the old state until we commit the duplicated state. |
| */ |
| for_each_new_crtc_in_state(state, crtc, crtc_state, i) { |
| /* |
| * Force recalculation even if we restore |
| * current state. With fast modeset this may not result |
| * in a modeset when the state is compatible. |
| */ |
| crtc_state->mode_changed = true; |
| } |
| |
| /* ignore any reset values/BIOS leftovers in the WM registers */ |
| if (!HAS_GMCH(to_i915(dev))) |
| to_intel_atomic_state(state)->skip_intermediate_wm = true; |
| |
| ret = drm_atomic_helper_commit_duplicated_state(state, ctx); |
| |
| drm_WARN_ON(dev, ret == -EDEADLK); |
| return ret; |
| } |
| |
| static bool gpu_reset_clobbers_display(struct drm_i915_private *dev_priv) |
| { |
| return (INTEL_INFO(dev_priv)->gpu_reset_clobbers_display && |
| intel_has_gpu_reset(&dev_priv->gt)); |
| } |
| |
| void intel_display_prepare_reset(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx; |
| struct drm_atomic_state *state; |
| int ret; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| /* reset doesn't touch the display */ |
| if (!dev_priv->params.force_reset_modeset_test && |
| !gpu_reset_clobbers_display(dev_priv)) |
| return; |
| |
| /* We have a modeset vs reset deadlock, defensively unbreak it. */ |
| set_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags); |
| smp_mb__after_atomic(); |
| wake_up_bit(&dev_priv->gt.reset.flags, I915_RESET_MODESET); |
| |
| if (atomic_read(&dev_priv->gpu_error.pending_fb_pin)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Modeset potentially stuck, unbreaking through wedging\n"); |
| intel_gt_set_wedged(&dev_priv->gt); |
| } |
| |
| /* |
| * Need mode_config.mutex so that we don't |
| * trample ongoing ->detect() and whatnot. |
| */ |
| mutex_lock(&dev->mode_config.mutex); |
| drm_modeset_acquire_init(ctx, 0); |
| while (1) { |
| ret = drm_modeset_lock_all_ctx(dev, ctx); |
| if (ret != -EDEADLK) |
| break; |
| |
| drm_modeset_backoff(ctx); |
| } |
| /* |
| * Disabling the crtcs gracefully seems nicer. Also the |
| * g33 docs say we should at least disable all the planes. |
| */ |
| state = drm_atomic_helper_duplicate_state(dev, ctx); |
| if (IS_ERR(state)) { |
| ret = PTR_ERR(state); |
| drm_err(&dev_priv->drm, "Duplicating state failed with %i\n", |
| ret); |
| return; |
| } |
| |
| ret = drm_atomic_helper_disable_all(dev, ctx); |
| if (ret) { |
| drm_err(&dev_priv->drm, "Suspending crtc's failed with %i\n", |
| ret); |
| drm_atomic_state_put(state); |
| return; |
| } |
| |
| dev_priv->modeset_restore_state = state; |
| state->acquire_ctx = ctx; |
| } |
| |
| void intel_display_finish_reset(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx; |
| struct drm_atomic_state *state; |
| int ret; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| /* reset doesn't touch the display */ |
| if (!test_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags)) |
| return; |
| |
| state = fetch_and_zero(&dev_priv->modeset_restore_state); |
| if (!state) |
| goto unlock; |
| |
| /* reset doesn't touch the display */ |
| if (!gpu_reset_clobbers_display(dev_priv)) { |
| /* for testing only restore the display */ |
| ret = __intel_display_resume(dev, state, ctx); |
| if (ret) |
| drm_err(&dev_priv->drm, |
| "Restoring old state failed with %i\n", ret); |
| } else { |
| /* |
| * The display has been reset as well, |
| * so need a full re-initialization. |
| */ |
| intel_pps_unlock_regs_wa(dev_priv); |
| intel_modeset_init_hw(dev_priv); |
| intel_init_clock_gating(dev_priv); |
| intel_hpd_init(dev_priv); |
| |
| ret = __intel_display_resume(dev, state, ctx); |
| if (ret) |
| drm_err(&dev_priv->drm, |
| "Restoring old state failed with %i\n", ret); |
| |
| intel_hpd_poll_disable(dev_priv); |
| } |
| |
| drm_atomic_state_put(state); |
| unlock: |
| drm_modeset_drop_locks(ctx); |
| drm_modeset_acquire_fini(ctx); |
| mutex_unlock(&dev->mode_config.mutex); |
| |
| clear_bit_unlock(I915_RESET_MODESET, &dev_priv->gt.reset.flags); |
| } |
| |
| static bool underrun_recovery_supported(const struct intel_crtc_state *crtc_state) |
| { |
| if (crtc_state->pch_pfit.enabled && |
| (crtc_state->pipe_src_w > drm_rect_width(&crtc_state->pch_pfit.dst) || |
| crtc_state->pipe_src_h > drm_rect_height(&crtc_state->pch_pfit.dst) || |
| crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)) |
| return false; |
| |
| if (crtc_state->dsc.compression_enable) |
| return false; |
| |
| if (crtc_state->has_psr2) |
| return false; |
| |
| if (crtc_state->splitter.enable) |
| return false; |
| |
| return true; |
| } |
| |
| static void icl_set_pipe_chicken(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPE_CHICKEN(pipe)); |
| |
| /* |
| * Display WA #1153: icl |
| * enable hardware to bypass the alpha math |
| * and rounding for per-pixel values 00 and 0xff |
| */ |
| tmp |= PER_PIXEL_ALPHA_BYPASS_EN; |
| /* |
| * Display WA # 1605353570: icl |
| * Set the pixel rounding bit to 1 for allowing |
| * passthrough of Frame buffer pixels unmodified |
| * across pipe |
| */ |
| tmp |= PIXEL_ROUNDING_TRUNC_FB_PASSTHRU; |
| |
| if (IS_DG2(dev_priv)) { |
| /* |
| * Underrun recovery must always be disabled on DG2. However |
| * the chicken bit meaning is inverted compared to other |
| * platforms. |
| */ |
| tmp &= ~UNDERRUN_RECOVERY_ENABLE_DG2; |
| } else if (DISPLAY_VER(dev_priv) >= 13) { |
| if (underrun_recovery_supported(crtc_state)) |
| tmp &= ~UNDERRUN_RECOVERY_DISABLE_ADLP; |
| else |
| tmp |= UNDERRUN_RECOVERY_DISABLE_ADLP; |
| } |
| |
| intel_de_write(dev_priv, PIPE_CHICKEN(pipe), tmp); |
| } |
| |
| bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv) |
| { |
| struct drm_crtc *crtc; |
| bool cleanup_done; |
| |
| drm_for_each_crtc(crtc, &dev_priv->drm) { |
| struct drm_crtc_commit *commit; |
| spin_lock(&crtc->commit_lock); |
| commit = list_first_entry_or_null(&crtc->commit_list, |
| struct drm_crtc_commit, commit_entry); |
| cleanup_done = commit ? |
| try_wait_for_completion(&commit->cleanup_done) : true; |
| spin_unlock(&crtc->commit_lock); |
| |
| if (cleanup_done) |
| continue; |
| |
| drm_crtc_wait_one_vblank(crtc); |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void lpt_disable_iclkip(struct drm_i915_private *dev_priv) |
| { |
| u32 temp; |
| |
| intel_de_write(dev_priv, PIXCLK_GATE, PIXCLK_GATE_GATE); |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK); |
| temp |= SBI_SSCCTL_DISABLE; |
| intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK); |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| } |
| |
| /* Program iCLKIP clock to the desired frequency */ |
| static void lpt_program_iclkip(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| int clock = crtc_state->hw.adjusted_mode.crtc_clock; |
| u32 divsel, phaseinc, auxdiv, phasedir = 0; |
| u32 temp; |
| |
| lpt_disable_iclkip(dev_priv); |
| |
| /* The iCLK virtual clock root frequency is in MHz, |
| * but the adjusted_mode->crtc_clock in in KHz. To get the |
| * divisors, it is necessary to divide one by another, so we |
| * convert the virtual clock precision to KHz here for higher |
| * precision. |
| */ |
| for (auxdiv = 0; auxdiv < 2; auxdiv++) { |
| u32 iclk_virtual_root_freq = 172800 * 1000; |
| u32 iclk_pi_range = 64; |
| u32 desired_divisor; |
| |
| desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq, |
| clock << auxdiv); |
| divsel = (desired_divisor / iclk_pi_range) - 2; |
| phaseinc = desired_divisor % iclk_pi_range; |
| |
| /* |
| * Near 20MHz is a corner case which is |
| * out of range for the 7-bit divisor |
| */ |
| if (divsel <= 0x7f) |
| break; |
| } |
| |
| /* This should not happen with any sane values */ |
| drm_WARN_ON(&dev_priv->drm, SBI_SSCDIVINTPHASE_DIVSEL(divsel) & |
| ~SBI_SSCDIVINTPHASE_DIVSEL_MASK); |
| drm_WARN_ON(&dev_priv->drm, SBI_SSCDIVINTPHASE_DIR(phasedir) & |
| ~SBI_SSCDIVINTPHASE_INCVAL_MASK); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n", |
| clock, auxdiv, divsel, phasedir, phaseinc); |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| /* Program SSCDIVINTPHASE6 */ |
| temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK); |
| temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK; |
| temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel); |
| temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK; |
| temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc); |
| temp |= SBI_SSCDIVINTPHASE_DIR(phasedir); |
| temp |= SBI_SSCDIVINTPHASE_PROPAGATE; |
| intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK); |
| |
| /* Program SSCAUXDIV */ |
| temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK); |
| temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1); |
| temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv); |
| intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK); |
| |
| /* Enable modulator and associated divider */ |
| temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK); |
| temp &= ~SBI_SSCCTL_DISABLE; |
| intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK); |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| |
| /* Wait for initialization time */ |
| udelay(24); |
| |
| intel_de_write(dev_priv, PIXCLK_GATE, PIXCLK_GATE_UNGATE); |
| } |
| |
| int lpt_get_iclkip(struct drm_i915_private *dev_priv) |
| { |
| u32 divsel, phaseinc, auxdiv; |
| u32 iclk_virtual_root_freq = 172800 * 1000; |
| u32 iclk_pi_range = 64; |
| u32 desired_divisor; |
| u32 temp; |
| |
| if ((intel_de_read(dev_priv, PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0) |
| return 0; |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK); |
| if (temp & SBI_SSCCTL_DISABLE) { |
| mutex_unlock(&dev_priv->sb_lock); |
| return 0; |
| } |
| |
| temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK); |
| divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >> |
| SBI_SSCDIVINTPHASE_DIVSEL_SHIFT; |
| phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >> |
| SBI_SSCDIVINTPHASE_INCVAL_SHIFT; |
| |
| temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK); |
| auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >> |
| SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT; |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| |
| desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc; |
| |
| return DIV_ROUND_CLOSEST(iclk_virtual_root_freq, |
| desired_divisor << auxdiv); |
| } |
| |
| static void ilk_pch_transcoder_set_timings(const struct intel_crtc_state *crtc_state, |
| enum pipe pch_transcoder) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| intel_de_write(dev_priv, PCH_TRANS_HTOTAL(pch_transcoder), |
| intel_de_read(dev_priv, HTOTAL(cpu_transcoder))); |
| intel_de_write(dev_priv, PCH_TRANS_HBLANK(pch_transcoder), |
| intel_de_read(dev_priv, HBLANK(cpu_transcoder))); |
| intel_de_write(dev_priv, PCH_TRANS_HSYNC(pch_transcoder), |
| intel_de_read(dev_priv, HSYNC(cpu_transcoder))); |
| |
| intel_de_write(dev_priv, PCH_TRANS_VTOTAL(pch_transcoder), |
| intel_de_read(dev_priv, VTOTAL(cpu_transcoder))); |
| intel_de_write(dev_priv, PCH_TRANS_VBLANK(pch_transcoder), |
| intel_de_read(dev_priv, VBLANK(cpu_transcoder))); |
| intel_de_write(dev_priv, PCH_TRANS_VSYNC(pch_transcoder), |
| intel_de_read(dev_priv, VSYNC(cpu_transcoder))); |
| intel_de_write(dev_priv, PCH_TRANS_VSYNCSHIFT(pch_transcoder), |
| intel_de_read(dev_priv, VSYNCSHIFT(cpu_transcoder))); |
| } |
| |
| /* |
| * Finds the encoder associated with the given CRTC. This can only be |
| * used when we know that the CRTC isn't feeding multiple encoders! |
| */ |
| struct intel_encoder * |
| intel_get_crtc_new_encoder(const struct intel_atomic_state *state, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| const struct drm_connector_state *connector_state; |
| const struct drm_connector *connector; |
| struct intel_encoder *encoder = NULL; |
| int num_encoders = 0; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| encoder = to_intel_encoder(connector_state->best_encoder); |
| num_encoders++; |
| } |
| |
| drm_WARN(encoder->base.dev, num_encoders != 1, |
| "%d encoders for pipe %c\n", |
| num_encoders, pipe_name(crtc->pipe)); |
| |
| return encoder; |
| } |
| |
| /* |
| * Enable PCH resources required for PCH ports: |
| * - PCH PLLs |
| * - FDI training & RX/TX |
| * - update transcoder timings |
| * - DP transcoding bits |
| * - transcoder |
| */ |
| static void ilk_pch_enable(const struct intel_atomic_state *state, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum pipe pipe = crtc->pipe; |
| u32 temp; |
| |
| assert_pch_transcoder_disabled(dev_priv, pipe); |
| |
| /* For PCH output, training FDI link */ |
| intel_fdi_link_train(crtc, crtc_state); |
| |
| /* We need to program the right clock selection before writing the pixel |
| * mutliplier into the DPLL. */ |
| if (HAS_PCH_CPT(dev_priv)) { |
| u32 sel; |
| |
| temp = intel_de_read(dev_priv, PCH_DPLL_SEL); |
| temp |= TRANS_DPLL_ENABLE(pipe); |
| sel = TRANS_DPLLB_SEL(pipe); |
| if (crtc_state->shared_dpll == |
| intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B)) |
| temp |= sel; |
| else |
| temp &= ~sel; |
| intel_de_write(dev_priv, PCH_DPLL_SEL, temp); |
| } |
| |
| /* XXX: pch pll's can be enabled any time before we enable the PCH |
| * transcoder, and we actually should do this to not upset any PCH |
| * transcoder that already use the clock when we share it. |
| * |
| * Note that enable_shared_dpll tries to do the right thing, but |
| * get_shared_dpll unconditionally resets the pll - we need that to have |
| * the right LVDS enable sequence. */ |
| intel_enable_shared_dpll(crtc_state); |
| |
| /* set transcoder timing, panel must allow it */ |
| assert_pps_unlocked(dev_priv, pipe); |
| ilk_pch_transcoder_set_timings(crtc_state, pipe); |
| |
| intel_fdi_normal_train(crtc); |
| |
| /* For PCH DP, enable TRANS_DP_CTL */ |
| if (HAS_PCH_CPT(dev_priv) && |
| intel_crtc_has_dp_encoder(crtc_state)) { |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| u32 bpc = (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5; |
| i915_reg_t reg = TRANS_DP_CTL(pipe); |
| enum port port; |
| |
| temp = intel_de_read(dev_priv, reg); |
| temp &= ~(TRANS_DP_PORT_SEL_MASK | |
| TRANS_DP_SYNC_MASK | |
| TRANS_DP_BPC_MASK); |
| temp |= TRANS_DP_OUTPUT_ENABLE; |
| temp |= bpc << 9; /* same format but at 11:9 */ |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) |
| temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) |
| temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; |
| |
| port = intel_get_crtc_new_encoder(state, crtc_state)->port; |
| drm_WARN_ON(dev, port < PORT_B || port > PORT_D); |
| temp |= TRANS_DP_PORT_SEL(port); |
| |
| intel_de_write(dev_priv, reg, temp); |
| } |
| |
| ilk_enable_pch_transcoder(crtc_state); |
| } |
| |
| void lpt_pch_enable(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| assert_pch_transcoder_disabled(dev_priv, PIPE_A); |
| |
| lpt_program_iclkip(crtc_state); |
| |
| /* Set transcoder timing. */ |
| ilk_pch_transcoder_set_timings(crtc_state, PIPE_A); |
| |
| lpt_enable_pch_transcoder(dev_priv, cpu_transcoder); |
| } |
| |
| static void cpt_verify_modeset(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| i915_reg_t dslreg = PIPEDSL(pipe); |
| u32 temp; |
| |
| temp = intel_de_read(dev_priv, dslreg); |
| udelay(500); |
| if (wait_for(intel_de_read(dev_priv, dslreg) != temp, 5)) { |
| if (wait_for(intel_de_read(dev_priv, dslreg) != temp, 5)) |
| drm_err(&dev_priv->drm, |
| "mode set failed: pipe %c stuck\n", |
| pipe_name(pipe)); |
| } |
| } |
| |
| static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct drm_rect *dst = &crtc_state->pch_pfit.dst; |
| enum pipe pipe = crtc->pipe; |
| int width = drm_rect_width(dst); |
| int height = drm_rect_height(dst); |
| int x = dst->x1; |
| int y = dst->y1; |
| |
| if (!crtc_state->pch_pfit.enabled) |
| return; |
| |
| /* Force use of hard-coded filter coefficients |
| * as some pre-programmed values are broken, |
| * e.g. x201. |
| */ |
| if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) |
| intel_de_write(dev_priv, PF_CTL(pipe), PF_ENABLE | |
| PF_FILTER_MED_3x3 | PF_PIPE_SEL_IVB(pipe)); |
| else |
| intel_de_write(dev_priv, PF_CTL(pipe), PF_ENABLE | |
| PF_FILTER_MED_3x3); |
| intel_de_write(dev_priv, PF_WIN_POS(pipe), x << 16 | y); |
| intel_de_write(dev_priv, PF_WIN_SZ(pipe), width << 16 | height); |
| } |
| |
| void hsw_enable_ips(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (!crtc_state->ips_enabled) |
| return; |
| |
| /* |
| * We can only enable IPS after we enable a plane and wait for a vblank |
| * This function is called from post_plane_update, which is run after |
| * a vblank wait. |
| */ |
| drm_WARN_ON(dev, !(crtc_state->active_planes & ~BIT(PLANE_CURSOR))); |
| |
| if (IS_BROADWELL(dev_priv)) { |
| drm_WARN_ON(dev, sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, |
| IPS_ENABLE | IPS_PCODE_CONTROL)); |
| /* Quoting Art Runyan: "its not safe to expect any particular |
| * value in IPS_CTL bit 31 after enabling IPS through the |
| * mailbox." Moreover, the mailbox may return a bogus state, |
| * so we need to just enable it and continue on. |
| */ |
| } else { |
| intel_de_write(dev_priv, IPS_CTL, IPS_ENABLE); |
| /* The bit only becomes 1 in the next vblank, so this wait here |
| * is essentially intel_wait_for_vblank. If we don't have this |
| * and don't wait for vblanks until the end of crtc_enable, then |
| * the HW state readout code will complain that the expected |
| * IPS_CTL value is not the one we read. */ |
| if (intel_de_wait_for_set(dev_priv, IPS_CTL, IPS_ENABLE, 50)) |
| drm_err(&dev_priv->drm, |
| "Timed out waiting for IPS enable\n"); |
| } |
| } |
| |
| void hsw_disable_ips(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (!crtc_state->ips_enabled) |
| return; |
| |
| if (IS_BROADWELL(dev_priv)) { |
| drm_WARN_ON(dev, |
| sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0)); |
| /* |
| * Wait for PCODE to finish disabling IPS. The BSpec specified |
| * 42ms timeout value leads to occasional timeouts so use 100ms |
| * instead. |
| */ |
| if (intel_de_wait_for_clear(dev_priv, IPS_CTL, IPS_ENABLE, 100)) |
| drm_err(&dev_priv->drm, |
| "Timed out waiting for IPS disable\n"); |
| } else { |
| intel_de_write(dev_priv, IPS_CTL, 0); |
| intel_de_posting_read(dev_priv, IPS_CTL); |
| } |
| |
| /* We need to wait for a vblank before we can disable the plane. */ |
| intel_wait_for_vblank(dev_priv, crtc->pipe); |
| } |
| |
| static void intel_crtc_dpms_overlay_disable(struct intel_crtc *crtc) |
| { |
| if (crtc->overlay) |
| (void) intel_overlay_switch_off(crtc->overlay); |
| |
| /* Let userspace switch the overlay on again. In most cases userspace |
| * has to recompute where to put it anyway. |
| */ |
| } |
| |
| static bool hsw_pre_update_disable_ips(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!old_crtc_state->ips_enabled) |
| return false; |
| |
| if (intel_crtc_needs_modeset(new_crtc_state)) |
| return true; |
| |
| /* |
| * Workaround : Do not read or write the pipe palette/gamma data while |
| * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled. |
| * |
| * Disable IPS before we program the LUT. |
| */ |
| if (IS_HASWELL(dev_priv) && |
| (new_crtc_state->uapi.color_mgmt_changed || |
| new_crtc_state->update_pipe) && |
| new_crtc_state->gamma_mode == GAMMA_MODE_MODE_SPLIT) |
| return true; |
| |
| return !new_crtc_state->ips_enabled; |
| } |
| |
| static bool hsw_post_update_enable_ips(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!new_crtc_state->ips_enabled) |
| return false; |
| |
| if (intel_crtc_needs_modeset(new_crtc_state)) |
| return true; |
| |
| /* |
| * Workaround : Do not read or write the pipe palette/gamma data while |
| * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled. |
| * |
| * Re-enable IPS after the LUT has been programmed. |
| */ |
| if (IS_HASWELL(dev_priv) && |
| (new_crtc_state->uapi.color_mgmt_changed || |
| new_crtc_state->update_pipe) && |
| new_crtc_state->gamma_mode == GAMMA_MODE_MODE_SPLIT) |
| return true; |
| |
| /* |
| * We can't read out IPS on broadwell, assume the worst and |
| * forcibly enable IPS on the first fastset. |
| */ |
| if (new_crtc_state->update_pipe && old_crtc_state->inherited) |
| return true; |
| |
| return !old_crtc_state->ips_enabled; |
| } |
| |
| static bool needs_nv12_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (!crtc_state->nv12_planes) |
| return false; |
| |
| /* WA Display #0827: Gen9:all */ |
| if (DISPLAY_VER(dev_priv) == 9) |
| return true; |
| |
| return false; |
| } |
| |
| static bool needs_scalerclk_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| /* Wa_2006604312:icl,ehl */ |
| if (crtc_state->scaler_state.scaler_users > 0 && DISPLAY_VER(dev_priv) == 11) |
| return true; |
| |
| return false; |
| } |
| |
| static bool needs_cursorclk_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| /* Wa_1604331009:icl,jsl,ehl */ |
| if (is_hdr_mode(crtc_state) && |
| crtc_state->active_planes & BIT(PLANE_CURSOR) && |
| DISPLAY_VER(dev_priv) == 11) |
| return true; |
| |
| return false; |
| } |
| |
| static void intel_async_flip_vtd_wa(struct drm_i915_private *i915, |
| enum pipe pipe, bool enable) |
| { |
| if (DISPLAY_VER(i915) == 9) { |
| /* |
| * "Plane N strech max must be programmed to 11b (x1) |
| * when Async flips are enabled on that plane." |
| */ |
| intel_de_rmw(i915, CHICKEN_PIPESL_1(pipe), |
| SKL_PLANE1_STRETCH_MAX_MASK, |
| enable ? SKL_PLANE1_STRETCH_MAX_X1 : SKL_PLANE1_STRETCH_MAX_X8); |
| } else { |
| /* Also needed on HSW/BDW albeit undocumented */ |
| intel_de_rmw(i915, CHICKEN_PIPESL_1(pipe), |
| HSW_PRI_STRETCH_MAX_MASK, |
| enable ? HSW_PRI_STRETCH_MAX_X1 : HSW_PRI_STRETCH_MAX_X8); |
| } |
| } |
| |
| static bool needs_async_flip_vtd_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| |
| return crtc_state->uapi.async_flip && intel_vtd_active(i915) && |
| (DISPLAY_VER(i915) == 9 || IS_BROADWELL(i915) || IS_HASWELL(i915)); |
| } |
| |
| static bool planes_enabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| return (!old_crtc_state->active_planes || intel_crtc_needs_modeset(new_crtc_state)) && |
| new_crtc_state->active_planes; |
| } |
| |
| static bool planes_disabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| return old_crtc_state->active_planes && |
| (!new_crtc_state->active_planes || intel_crtc_needs_modeset(new_crtc_state)); |
| } |
| |
| static void intel_post_plane_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| enum pipe pipe = crtc->pipe; |
| |
| intel_frontbuffer_flip(dev_priv, new_crtc_state->fb_bits); |
| |
| if (new_crtc_state->update_wm_post && new_crtc_state->hw.active) |
| intel_update_watermarks(dev_priv); |
| |
| if (hsw_post_update_enable_ips(old_crtc_state, new_crtc_state)) |
| hsw_enable_ips(new_crtc_state); |
| |
| intel_fbc_post_update(state, crtc); |
| intel_drrs_page_flip(state, crtc); |
| |
| if (needs_async_flip_vtd_wa(old_crtc_state) && |
| !needs_async_flip_vtd_wa(new_crtc_state)) |
| intel_async_flip_vtd_wa(dev_priv, pipe, false); |
| |
| if (needs_nv12_wa(old_crtc_state) && |
| !needs_nv12_wa(new_crtc_state)) |
| skl_wa_827(dev_priv, pipe, false); |
| |
| if (needs_scalerclk_wa(old_crtc_state) && |
| !needs_scalerclk_wa(new_crtc_state)) |
| icl_wa_scalerclkgating(dev_priv, pipe, false); |
| |
| if (needs_cursorclk_wa(old_crtc_state) && |
| !needs_cursorclk_wa(new_crtc_state)) |
| icl_wa_cursorclkgating(dev_priv, pipe, false); |
| |
| } |
| |
| static void intel_crtc_enable_flip_done(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| u8 update_planes = crtc_state->update_planes; |
| const struct intel_plane_state *plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->enable_flip_done && |
| plane->pipe == crtc->pipe && |
| update_planes & BIT(plane->id)) |
| plane->enable_flip_done(plane); |
| } |
| } |
| |
| static void intel_crtc_disable_flip_done(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| u8 update_planes = crtc_state->update_planes; |
| const struct intel_plane_state *plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->disable_flip_done && |
| plane->pipe == crtc->pipe && |
| update_planes & BIT(plane->id)) |
| plane->disable_flip_done(plane); |
| } |
| } |
| |
| static void intel_crtc_async_flip_disable_wa(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| u8 update_planes = new_crtc_state->update_planes; |
| const struct intel_plane_state *old_plane_state; |
| struct intel_plane *plane; |
| bool need_vbl_wait = false; |
| int i; |
| |
| for_each_old_intel_plane_in_state(state, plane, old_plane_state, i) { |
| if (plane->need_async_flip_disable_wa && |
| plane->pipe == crtc->pipe && |
| update_planes & BIT(plane->id)) { |
| /* |
| * Apart from the async flip bit we want to |
| * preserve the old state for the plane. |
| */ |
| plane->async_flip(plane, old_crtc_state, |
| old_plane_state, false); |
| need_vbl_wait = true; |
| } |
| } |
| |
| if (need_vbl_wait) |
| intel_wait_for_vblank(i915, crtc->pipe); |
| } |
| |
| static void intel_pre_plane_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| enum pipe pipe = crtc->pipe; |
| |
| if (hsw_pre_update_disable_ips(old_crtc_state, new_crtc_state)) |
| hsw_disable_ips(old_crtc_state); |
| |
| if (intel_fbc_pre_update(state, crtc)) |
| intel_wait_for_vblank(dev_priv, pipe); |
| |
| if (!needs_async_flip_vtd_wa(old_crtc_state) && |
| needs_async_flip_vtd_wa(new_crtc_state)) |
| intel_async_flip_vtd_wa(dev_priv, pipe, true); |
| |
| /* Display WA 827 */ |
| if (!needs_nv12_wa(old_crtc_state) && |
| needs_nv12_wa(new_crtc_state)) |
| skl_wa_827(dev_priv, pipe, true); |
| |
| /* Wa_2006604312:icl,ehl */ |
| if (!needs_scalerclk_wa(old_crtc_state) && |
| needs_scalerclk_wa(new_crtc_state)) |
| icl_wa_scalerclkgating(dev_priv, pipe, true); |
| |
| /* Wa_1604331009:icl,jsl,ehl */ |
| if (!needs_cursorclk_wa(old_crtc_state) && |
| needs_cursorclk_wa(new_crtc_state)) |
| icl_wa_cursorclkgating(dev_priv, pipe, true); |
| |
| /* |
| * Vblank time updates from the shadow to live plane control register |
| * are blocked if the memory self-refresh mode is active at that |
| * moment. So to make sure the plane gets truly disabled, disable |
| * first the self-refresh mode. The self-refresh enable bit in turn |
| * will be checked/applied by the HW only at the next frame start |
| * event which is after the vblank start event, so we need to have a |
| * wait-for-vblank between disabling the plane and the pipe. |
| */ |
| if (HAS_GMCH(dev_priv) && old_crtc_state->hw.active && |
| new_crtc_state->disable_cxsr && intel_set_memory_cxsr(dev_priv, false)) |
| intel_wait_for_vblank(dev_priv, pipe); |
| |
| /* |
| * IVB workaround: must disable low power watermarks for at least |
| * one frame before enabling scaling. LP watermarks can be re-enabled |
| * when scaling is disabled. |
| * |
| * WaCxSRDisabledForSpriteScaling:ivb |
| */ |
| if (old_crtc_state->hw.active && |
| new_crtc_state->disable_lp_wm && ilk_disable_lp_wm(dev_priv)) |
| intel_wait_for_vblank(dev_priv, pipe); |
| |
| /* |
| * If we're doing a modeset we don't need to do any |
| * pre-vblank watermark programming here. |
| */ |
| if (!intel_crtc_needs_modeset(new_crtc_state)) { |
| /* |
| * For platforms that support atomic watermarks, program the |
| * 'intermediate' watermarks immediately. On pre-gen9 platforms, these |
| * will be the intermediate values that are safe for both pre- and |
| * post- vblank; when vblank happens, the 'active' values will be set |
| * to the final 'target' values and we'll do this again to get the |
| * optimal watermarks. For gen9+ platforms, the values we program here |
| * will be the final target values which will get automatically latched |
| * at vblank time; no further programming will be necessary. |
| * |
| * If a platform hasn't been transitioned to atomic watermarks yet, |
| * we'll continue to update watermarks the old way, if flags tell |
| * us to. |
| */ |
| if (!intel_initial_watermarks(state, crtc)) |
| if (new_crtc_state->update_wm_pre) |
| intel_update_watermarks(dev_priv); |
| } |
| |
| /* |
| * Gen2 reports pipe underruns whenever all planes are disabled. |
| * So disable underrun reporting before all the planes get disabled. |
| * |
| * We do this after .initial_watermarks() so that we have a |
| * chance of catching underruns with the intermediate watermarks |
| * vs. the old plane configuration. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2 && planes_disabling(old_crtc_state, new_crtc_state)) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| /* |
| * WA for platforms where async address update enable bit |
| * is double buffered and only latched at start of vblank. |
| */ |
| if (old_crtc_state->uapi.async_flip && !new_crtc_state->uapi.async_flip) |
| intel_crtc_async_flip_disable_wa(state, crtc); |
| } |
| |
| static void intel_crtc_disable_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| unsigned int update_mask = new_crtc_state->update_planes; |
| const struct intel_plane_state *old_plane_state; |
| struct intel_plane *plane; |
| unsigned fb_bits = 0; |
| int i; |
| |
| intel_crtc_dpms_overlay_disable(crtc); |
| |
| for_each_old_intel_plane_in_state(state, plane, old_plane_state, i) { |
| if (crtc->pipe != plane->pipe || |
| !(update_mask & BIT(plane->id))) |
| continue; |
| |
| intel_disable_plane(plane, new_crtc_state); |
| |
| if (old_plane_state->uapi.visible) |
| fb_bits |= plane->frontbuffer_bit; |
| } |
| |
| intel_frontbuffer_flip(dev_priv, fb_bits); |
| } |
| |
| /* |
| * intel_connector_primary_encoder - get the primary encoder for a connector |
| * @connector: connector for which to return the encoder |
| * |
| * Returns the primary encoder for a connector. There is a 1:1 mapping from |
| * all connectors to their encoder, except for DP-MST connectors which have |
| * both a virtual and a primary encoder. These DP-MST primary encoders can be |
| * pointed to by as many DP-MST connectors as there are pipes. |
| */ |
| static struct intel_encoder * |
| intel_connector_primary_encoder(struct intel_connector *connector) |
| { |
| struct intel_encoder *encoder; |
| |
| if (connector->mst_port) |
| return &dp_to_dig_port(connector->mst_port)->base; |
| |
| encoder = intel_attached_encoder(connector); |
| drm_WARN_ON(connector->base.dev, !encoder); |
| |
| return encoder; |
| } |
| |
| static void intel_encoders_update_prepare(struct intel_atomic_state *state) |
| { |
| struct drm_connector_state *new_conn_state; |
| struct drm_connector *connector; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, new_conn_state, |
| i) { |
| struct intel_connector *intel_connector; |
| struct intel_encoder *encoder; |
| struct intel_crtc *crtc; |
| |
| if (!intel_connector_needs_modeset(state, connector)) |
| continue; |
| |
| intel_connector = to_intel_connector(connector); |
| encoder = intel_connector_primary_encoder(intel_connector); |
| if (!encoder->update_prepare) |
| continue; |
| |
| crtc = new_conn_state->crtc ? |
| to_intel_crtc(new_conn_state->crtc) : NULL; |
| encoder->update_prepare(state, encoder, crtc); |
| } |
| } |
| |
| static void intel_encoders_update_complete(struct intel_atomic_state *state) |
| { |
| struct drm_connector_state *new_conn_state; |
| struct drm_connector *connector; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, new_conn_state, |
| i) { |
| struct intel_connector *intel_connector; |
| struct intel_encoder *encoder; |
| struct intel_crtc *crtc; |
| |
| if (!intel_connector_needs_modeset(state, connector)) |
| continue; |
| |
| intel_connector = to_intel_connector(connector); |
| encoder = intel_connector_primary_encoder(intel_connector); |
| if (!encoder->update_complete) |
| continue; |
| |
| crtc = new_conn_state->crtc ? |
| to_intel_crtc(new_conn_state->crtc) : NULL; |
| encoder->update_complete(state, encoder, crtc); |
| } |
| } |
| |
| static void intel_encoders_pre_pll_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->pre_pll_enable) |
| encoder->pre_pll_enable(state, encoder, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_encoders_pre_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->pre_enable) |
| encoder->pre_enable(state, encoder, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_encoders_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->enable) |
| encoder->enable(state, encoder, |
| crtc_state, conn_state); |
| intel_opregion_notify_encoder(encoder, true); |
| } |
| } |
| |
| static void intel_encoders_pre_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->pre_disable) |
| encoder->pre_disable(state, encoder, old_crtc_state, |
| old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| intel_opregion_notify_encoder(encoder, false); |
| if (encoder->disable) |
| encoder->disable(state, encoder, |
| old_crtc_state, old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_post_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->post_disable) |
| encoder->post_disable(state, encoder, |
| old_crtc_state, old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_post_pll_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->post_pll_disable) |
| encoder->post_pll_disable(state, encoder, |
| old_crtc_state, old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_update_pipe(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->update_pipe) |
| encoder->update_pipe(state, encoder, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_disable_primary_plane(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct intel_plane *plane = to_intel_plane(crtc->base.primary); |
| |
| plane->disable_plane(plane, crtc_state); |
| } |
| |
| static void ilk_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| /* |
| * Sometimes spurious CPU pipe underruns happen during FDI |
| * training, at least with VGA+HDMI cloning. Suppress them. |
| * |
| * On ILK we get an occasional spurious CPU pipe underruns |
| * between eDP port A enable and vdd enable. Also PCH port |
| * enable seems to result in the occasional CPU pipe underrun. |
| * |
| * Spurious PCH underruns also occur during PCH enabling. |
| */ |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| if (intel_crtc_has_dp_encoder(new_crtc_state)) |
| intel_dp_set_m_n(new_crtc_state, M1_N1); |
| |
| intel_set_transcoder_timings(new_crtc_state); |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| if (new_crtc_state->has_pch_encoder) |
| intel_cpu_transcoder_set_m_n(new_crtc_state, |
| &new_crtc_state->fdi_m_n, NULL); |
| |
| ilk_set_pipeconf(new_crtc_state); |
| |
| crtc->active = true; |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| if (new_crtc_state->has_pch_encoder) { |
| /* Note: FDI PLL enabling _must_ be done before we enable the |
| * cpu pipes, hence this is separate from all the other fdi/pch |
| * enabling. */ |
| ilk_fdi_pll_enable(new_crtc_state); |
| } else { |
| assert_fdi_tx_disabled(dev_priv, pipe); |
| assert_fdi_rx_disabled(dev_priv, pipe); |
| } |
| |
| ilk_pfit_enable(new_crtc_state); |
| |
| /* |
| * On ILK+ LUT must be loaded before the pipe is running but with |
| * clocks enabled |
| */ |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit(new_crtc_state); |
| /* update DSPCNTR to configure gamma for pipe bottom color */ |
| intel_disable_primary_plane(new_crtc_state); |
| |
| intel_initial_watermarks(state, crtc); |
| intel_enable_transcoder(new_crtc_state); |
| |
| if (new_crtc_state->has_pch_encoder) |
| ilk_pch_enable(state, new_crtc_state); |
| |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| |
| if (HAS_PCH_CPT(dev_priv)) |
| cpt_verify_modeset(dev_priv, pipe); |
| |
| /* |
| * Must wait for vblank to avoid spurious PCH FIFO underruns. |
| * And a second vblank wait is needed at least on ILK with |
| * some interlaced HDMI modes. Let's do the double wait always |
| * in case there are more corner cases we don't know about. |
| */ |
| if (new_crtc_state->has_pch_encoder) { |
| intel_wait_for_vblank(dev_priv, pipe); |
| intel_wait_for_vblank(dev_priv, pipe); |
| } |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true); |
| } |
| |
| /* IPS only exists on ULT machines and is tied to pipe A. */ |
| static bool hsw_crtc_supports_ips(struct intel_crtc *crtc) |
| { |
| return HAS_IPS(to_i915(crtc->base.dev)) && crtc->pipe == PIPE_A; |
| } |
| |
| static void glk_pipe_scaler_clock_gating_wa(struct drm_i915_private *dev_priv, |
| enum pipe pipe, bool apply) |
| { |
| u32 val = intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)); |
| u32 mask = DPF_GATING_DIS | DPF_RAM_GATING_DIS | DPFR_GATING_DIS; |
| |
| if (apply) |
| val |= mask; |
| else |
| val &= ~mask; |
| |
| intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), val); |
| } |
| |
| static void icl_pipe_mbus_enable(struct intel_crtc *crtc, bool joined_mbus) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 val; |
| |
| /* Wa_22010947358:adl-p */ |
| if (IS_ALDERLAKE_P(dev_priv)) |
| val = joined_mbus ? MBUS_DBOX_A_CREDIT(6) : MBUS_DBOX_A_CREDIT(4); |
| else |
| val = MBUS_DBOX_A_CREDIT(2); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| val |= MBUS_DBOX_BW_CREDIT(2); |
| val |= MBUS_DBOX_B_CREDIT(12); |
| } else { |
| val |= MBUS_DBOX_BW_CREDIT(1); |
| val |= MBUS_DBOX_B_CREDIT(8); |
| } |
| |
| intel_de_write(dev_priv, PIPE_MBUS_DBOX_CTL(pipe), val); |
| } |
| |
| static void hsw_set_linetime_wm(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| intel_de_write(dev_priv, WM_LINETIME(crtc->pipe), |
| HSW_LINETIME(crtc_state->linetime) | |
| HSW_IPS_LINETIME(crtc_state->ips_linetime)); |
| } |
| |
| static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| i915_reg_t reg = CHICKEN_TRANS(crtc_state->cpu_transcoder); |
| u32 val; |
| |
| val = intel_de_read(dev_priv, reg); |
| val &= ~HSW_FRAME_START_DELAY_MASK; |
| val |= HSW_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, reg, val); |
| } |
| |
| static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *master = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(master->base.dev); |
| struct intel_crtc_state *master_crtc_state; |
| struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| struct intel_encoder *encoder = NULL; |
| int i; |
| |
| if (crtc_state->bigjoiner_slave) |
| master = crtc_state->bigjoiner_linked_crtc; |
| |
| master_crtc_state = intel_atomic_get_new_crtc_state(state, master); |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| if (conn_state->crtc != &master->base) |
| continue; |
| |
| encoder = to_intel_encoder(conn_state->best_encoder); |
| break; |
| } |
| |
| if (!crtc_state->bigjoiner_slave) { |
| /* need to enable VDSC, which we skipped in pre-enable */ |
| intel_dsc_enable(encoder, crtc_state); |
| } else { |
| /* |
| * Enable sequence steps 1-7 on bigjoiner master |
| */ |
| intel_encoders_pre_pll_enable(state, master); |
| if (master_crtc_state->shared_dpll) |
| intel_enable_shared_dpll(master_crtc_state); |
| intel_encoders_pre_enable(state, master); |
| |
| /* and DSC on slave */ |
| intel_dsc_enable(NULL, crtc_state); |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 13) |
| intel_uncompressed_joiner_enable(crtc_state); |
| } |
| |
| static void hsw_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe, hsw_workaround_pipe; |
| enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder; |
| bool psl_clkgate_wa; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| if (!new_crtc_state->bigjoiner) { |
| intel_encoders_pre_pll_enable(state, crtc); |
| |
| if (new_crtc_state->shared_dpll) |
| intel_enable_shared_dpll(new_crtc_state); |
| |
| intel_encoders_pre_enable(state, crtc); |
| } else { |
| icl_ddi_bigjoiner_pre_enable(state, new_crtc_state); |
| } |
| |
| intel_set_pipe_src_size(new_crtc_state); |
| if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv)) |
| bdw_set_pipemisc(new_crtc_state); |
| |
| if (!new_crtc_state->bigjoiner_slave && !transcoder_is_dsi(cpu_transcoder)) { |
| intel_set_transcoder_timings(new_crtc_state); |
| |
| if (cpu_transcoder != TRANSCODER_EDP) |
| intel_de_write(dev_priv, PIPE_MULT(cpu_transcoder), |
| new_crtc_state->pixel_multiplier - 1); |
| |
| if (new_crtc_state->has_pch_encoder) |
| intel_cpu_transcoder_set_m_n(new_crtc_state, |
| &new_crtc_state->fdi_m_n, NULL); |
| |
| hsw_set_frame_start_delay(new_crtc_state); |
| |
| hsw_set_transconf(new_crtc_state); |
| } |
| |
| crtc->active = true; |
| |
| /* Display WA #1180: WaDisableScalarClockGating: glk */ |
| psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 && |
| new_crtc_state->pch_pfit.enabled; |
| if (psl_clkgate_wa) |
| glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_pfit_enable(new_crtc_state); |
| else |
| ilk_pfit_enable(new_crtc_state); |
| |
| /* |
| * On ILK+ LUT must be loaded before the pipe is running but with |
| * clocks enabled |
| */ |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit(new_crtc_state); |
| /* update DSPCNTR to configure gamma/csc for pipe bottom color */ |
| if (DISPLAY_VER(dev_priv) < 9) |
| intel_disable_primary_plane(new_crtc_state); |
| |
| hsw_set_linetime_wm(new_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| icl_set_pipe_chicken(new_crtc_state); |
| |
| intel_initial_watermarks(state, crtc); |
| |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| const struct intel_dbuf_state *dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| |
| icl_pipe_mbus_enable(crtc, dbuf_state->joined_mbus); |
| } |
| |
| if (new_crtc_state->bigjoiner_slave) |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| |
| if (psl_clkgate_wa) { |
| intel_wait_for_vblank(dev_priv, pipe); |
| glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false); |
| } |
| |
| /* If we change the relative order between pipe/planes enabling, we need |
| * to change the workaround. */ |
| hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe; |
| if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) { |
| intel_wait_for_vblank(dev_priv, hsw_workaround_pipe); |
| intel_wait_for_vblank(dev_priv, hsw_workaround_pipe); |
| } |
| } |
| |
| void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* To avoid upsetting the power well on haswell only disable the pfit if |
| * it's in use. The hw state code will make sure we get this right. */ |
| if (!old_crtc_state->pch_pfit.enabled) |
| return; |
| |
| intel_de_write(dev_priv, PF_CTL(pipe), 0); |
| intel_de_write(dev_priv, PF_WIN_POS(pipe), 0); |
| intel_de_write(dev_priv, PF_WIN_SZ(pipe), 0); |
| } |
| |
| static void ilk_crtc_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* |
| * Sometimes spurious CPU pipe underruns happen when the |
| * pipe is already disabled, but FDI RX/TX is still enabled. |
| * Happens at least with VGA+HDMI cloning. Suppress them. |
| */ |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| intel_encoders_disable(state, crtc); |
| |
| intel_crtc_vblank_off(old_crtc_state); |
| |
| intel_disable_transcoder(old_crtc_state); |
| |
| ilk_pfit_disable(old_crtc_state); |
| |
| if (old_crtc_state->has_pch_encoder) |
| ilk_fdi_disable(crtc); |
| |
| intel_encoders_post_disable(state, crtc); |
| |
| if (old_crtc_state->has_pch_encoder) { |
| ilk_disable_pch_transcoder(dev_priv, pipe); |
| |
| if (HAS_PCH_CPT(dev_priv)) { |
| i915_reg_t reg; |
| u32 temp; |
| |
| /* disable TRANS_DP_CTL */ |
| reg = TRANS_DP_CTL(pipe); |
| temp = intel_de_read(dev_priv, reg); |
| temp &= ~(TRANS_DP_OUTPUT_ENABLE | |
| TRANS_DP_PORT_SEL_MASK); |
| temp |= TRANS_DP_PORT_SEL_NONE; |
| intel_de_write(dev_priv, reg, temp); |
| |
| /* disable DPLL_SEL */ |
| temp = intel_de_read(dev_priv, PCH_DPLL_SEL); |
| temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe)); |
| intel_de_write(dev_priv, PCH_DPLL_SEL, temp); |
| } |
| |
| ilk_fdi_pll_disable(crtc); |
| } |
| |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true); |
| } |
| |
| static void hsw_crtc_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| /* |
| * FIXME collapse everything to one hook. |
| * Need care with mst->ddi interactions. |
| */ |
| intel_encoders_disable(state, crtc); |
| intel_encoders_post_disable(state, crtc); |
| } |
| |
| static void i9xx_pfit_enable(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!crtc_state->gmch_pfit.control) |
| return; |
| |
| /* |
| * The panel fitter should only be adjusted whilst the pipe is disabled, |
| * according to register description and PRM. |
| */ |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, PFIT_CONTROL) & PFIT_ENABLE); |
| assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); |
| |
| intel_de_write(dev_priv, PFIT_PGM_RATIOS, |
| crtc_state->gmch_pfit.pgm_ratios); |
| intel_de_write(dev_priv, PFIT_CONTROL, crtc_state->gmch_pfit.control); |
| |
| /* Border color in case we don't scale up to the full screen. Black by |
| * default, change to something else for debugging. */ |
| intel_de_write(dev_priv, BCLRPAT(crtc->pipe), 0); |
| } |
| |
| bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy) |
| { |
| if (phy == PHY_NONE) |
| return false; |
| else if (IS_DG2(dev_priv)) |
| /* |
| * DG2 outputs labelled as "combo PHY" in the bspec use |
| * SNPS PHYs with completely different programming, |
| * hence we always return false here. |
| */ |
| return false; |
| else if (IS_ALDERLAKE_S(dev_priv)) |
| return phy <= PHY_E; |
| else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) |
| return phy <= PHY_D; |
| else if (IS_JSL_EHL(dev_priv)) |
| return phy <= PHY_C; |
| else if (DISPLAY_VER(dev_priv) >= 11) |
| return phy <= PHY_B; |
| else |
| return false; |
| } |
| |
| bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy) |
| { |
| if (IS_DG2(dev_priv)) |
| /* DG2's "TC1" output uses a SNPS PHY */ |
| return false; |
| else if (IS_ALDERLAKE_P(dev_priv)) |
| return phy >= PHY_F && phy <= PHY_I; |
| else if (IS_TIGERLAKE(dev_priv)) |
| return phy >= PHY_D && phy <= PHY_I; |
| else if (IS_ICELAKE(dev_priv)) |
| return phy >= PHY_C && phy <= PHY_F; |
| else |
| return false; |
| } |
| |
| bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy) |
| { |
| if (phy == PHY_NONE) |
| return false; |
| else if (IS_DG2(dev_priv)) |
| /* |
| * All four "combo" ports and the TC1 port (PHY E) use |
| * Synopsis PHYs. |
| */ |
| return phy <= PHY_E; |
| |
| return false; |
| } |
| |
| enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port) |
| { |
| if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD) |
| return PHY_D + port - PORT_D_XELPD; |
| else if (DISPLAY_VER(i915) >= 13 && port >= PORT_TC1) |
| return PHY_F + port - PORT_TC1; |
| else if (IS_ALDERLAKE_S(i915) && port >= PORT_TC1) |
| return PHY_B + port - PORT_TC1; |
| else if ((IS_DG1(i915) || IS_ROCKETLAKE(i915)) && port >= PORT_TC1) |
| return PHY_C + port - PORT_TC1; |
| else if (IS_JSL_EHL(i915) && port == PORT_D) |
| return PHY_A; |
| |
| return PHY_A + port - PORT_A; |
| } |
| |
| enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port) |
| { |
| if (!intel_phy_is_tc(dev_priv, intel_port_to_phy(dev_priv, port))) |
| return TC_PORT_NONE; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| return TC_PORT_1 + port - PORT_TC1; |
| else |
| return TC_PORT_1 + port - PORT_C; |
| } |
| |
| enum intel_display_power_domain intel_port_to_power_domain(enum port port) |
| { |
| switch (port) { |
| case PORT_A: |
| return POWER_DOMAIN_PORT_DDI_A_LANES; |
| case PORT_B: |
| return POWER_DOMAIN_PORT_DDI_B_LANES; |
| case PORT_C: |
| return POWER_DOMAIN_PORT_DDI_C_LANES; |
| case PORT_D: |
| return POWER_DOMAIN_PORT_DDI_D_LANES; |
| case PORT_E: |
| return POWER_DOMAIN_PORT_DDI_E_LANES; |
| case PORT_F: |
| return POWER_DOMAIN_PORT_DDI_F_LANES; |
| case PORT_G: |
| return POWER_DOMAIN_PORT_DDI_G_LANES; |
| case PORT_H: |
| return POWER_DOMAIN_PORT_DDI_H_LANES; |
| case PORT_I: |
| return POWER_DOMAIN_PORT_DDI_I_LANES; |
| default: |
| MISSING_CASE(port); |
| return POWER_DOMAIN_PORT_OTHER; |
| } |
| } |
| |
| enum intel_display_power_domain |
| intel_aux_power_domain(struct intel_digital_port *dig_port) |
| { |
| if (intel_tc_port_in_tbt_alt_mode(dig_port)) { |
| switch (dig_port->aux_ch) { |
| case AUX_CH_C: |
| return POWER_DOMAIN_AUX_C_TBT; |
| case AUX_CH_D: |
| return POWER_DOMAIN_AUX_D_TBT; |
| case AUX_CH_E: |
| return POWER_DOMAIN_AUX_E_TBT; |
| case AUX_CH_F: |
| return POWER_DOMAIN_AUX_F_TBT; |
| case AUX_CH_G: |
| return POWER_DOMAIN_AUX_G_TBT; |
| case AUX_CH_H: |
| return POWER_DOMAIN_AUX_H_TBT; |
| case AUX_CH_I: |
| return POWER_DOMAIN_AUX_I_TBT; |
| default: |
| MISSING_CASE(dig_port->aux_ch); |
| return POWER_DOMAIN_AUX_C_TBT; |
| } |
| } |
| |
| return intel_legacy_aux_to_power_domain(dig_port->aux_ch); |
| } |
| |
| /* |
| * Converts aux_ch to power_domain without caring about TBT ports for that use |
| * intel_aux_power_domain() |
| */ |
| enum intel_display_power_domain |
| intel_legacy_aux_to_power_domain(enum aux_ch aux_ch) |
| { |
| switch (aux_ch) { |
| case AUX_CH_A: |
| return POWER_DOMAIN_AUX_A; |
| case AUX_CH_B: |
| return POWER_DOMAIN_AUX_B; |
| case AUX_CH_C: |
| return POWER_DOMAIN_AUX_C; |
| case AUX_CH_D: |
| return POWER_DOMAIN_AUX_D; |
| case AUX_CH_E: |
| return POWER_DOMAIN_AUX_E; |
| case AUX_CH_F: |
| return POWER_DOMAIN_AUX_F; |
| case AUX_CH_G: |
| return POWER_DOMAIN_AUX_G; |
| case AUX_CH_H: |
| return POWER_DOMAIN_AUX_H; |
| case AUX_CH_I: |
| return POWER_DOMAIN_AUX_I; |
| default: |
| MISSING_CASE(aux_ch); |
| return POWER_DOMAIN_AUX_A; |
| } |
| } |
| |
| static u64 get_crtc_power_domains(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| struct drm_encoder *encoder; |
| enum pipe pipe = crtc->pipe; |
| u64 mask; |
| |
| if (!crtc_state->hw.active) |
| return 0; |
| |
| mask = BIT_ULL(POWER_DOMAIN_PIPE(pipe)); |
| mask |= BIT_ULL(POWER_DOMAIN_TRANSCODER(cpu_transcoder)); |
| if (crtc_state->pch_pfit.enabled || |
| crtc_state->pch_pfit.force_thru) |
| mask |= BIT_ULL(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe)); |
| |
| drm_for_each_encoder_mask(encoder, &dev_priv->drm, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| |
| mask |= BIT_ULL(intel_encoder->power_domain); |
| } |
| |
| if (HAS_DDI(dev_priv) && crtc_state->has_audio) |
| mask |= BIT_ULL(POWER_DOMAIN_AUDIO_MMIO); |
| |
| if (crtc_state->shared_dpll) |
| mask |= BIT_ULL(POWER_DOMAIN_DISPLAY_CORE); |
| |
| if (crtc_state->dsc.compression_enable) |
| mask |= BIT_ULL(intel_dsc_power_domain(crtc, cpu_transcoder)); |
| |
| return mask; |
| } |
| |
| static u64 |
| modeset_get_crtc_power_domains(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum intel_display_power_domain domain; |
| u64 domains, new_domains, old_domains; |
| |
| domains = get_crtc_power_domains(crtc_state); |
| |
| new_domains = domains & ~crtc->enabled_power_domains.mask; |
| old_domains = crtc->enabled_power_domains.mask & ~domains; |
| |
| for_each_power_domain(domain, new_domains) |
| intel_display_power_get_in_set(dev_priv, |
| &crtc->enabled_power_domains, |
| domain); |
| |
| return old_domains; |
| } |
| |
| static void modeset_put_crtc_power_domains(struct intel_crtc *crtc, |
| u64 domains) |
| { |
| intel_display_power_put_mask_in_set(to_i915(crtc->base.dev), |
| &crtc->enabled_power_domains, |
| domains); |
| } |
| |
| static void valleyview_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| if (intel_crtc_has_dp_encoder(new_crtc_state)) |
| intel_dp_set_m_n(new_crtc_state, M1_N1); |
| |
| intel_set_transcoder_timings(new_crtc_state); |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) { |
| intel_de_write(dev_priv, CHV_BLEND(pipe), CHV_BLEND_LEGACY); |
| intel_de_write(dev_priv, CHV_CANVAS(pipe), 0); |
| } |
| |
| i9xx_set_pipeconf(new_crtc_state); |
| |
| crtc->active = true; |
| |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| |
| intel_encoders_pre_pll_enable(state, crtc); |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| chv_enable_pll(new_crtc_state); |
| else |
| vlv_enable_pll(new_crtc_state); |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| i9xx_pfit_enable(new_crtc_state); |
| |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit(new_crtc_state); |
| /* update DSPCNTR to configure gamma for pipe bottom color */ |
| intel_disable_primary_plane(new_crtc_state); |
| |
| intel_initial_watermarks(state, crtc); |
| intel_enable_transcoder(new_crtc_state); |
| |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| } |
| |
| static void i9xx_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| if (intel_crtc_has_dp_encoder(new_crtc_state)) |
| intel_dp_set_m_n(new_crtc_state, M1_N1); |
| |
| intel_set_transcoder_timings(new_crtc_state); |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| i9xx_set_pipeconf(new_crtc_state); |
| |
| crtc->active = true; |
| |
| if (DISPLAY_VER(dev_priv) != 2) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| i9xx_enable_pll(new_crtc_state); |
| |
| i9xx_pfit_enable(new_crtc_state); |
| |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit(new_crtc_state); |
| /* update DSPCNTR to configure gamma for pipe bottom color */ |
| intel_disable_primary_plane(new_crtc_state); |
| |
| if (!intel_initial_watermarks(state, crtc)) |
| intel_update_watermarks(dev_priv); |
| intel_enable_transcoder(new_crtc_state); |
| |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| |
| /* prevents spurious underruns */ |
| if (DISPLAY_VER(dev_priv) == 2) |
| intel_wait_for_vblank(dev_priv, pipe); |
| } |
| |
| static void i9xx_pfit_disable(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!old_crtc_state->gmch_pfit.control) |
| return; |
| |
| assert_transcoder_disabled(dev_priv, old_crtc_state->cpu_transcoder); |
| |
| drm_dbg_kms(&dev_priv->drm, "disabling pfit, current: 0x%08x\n", |
| intel_de_read(dev_priv, PFIT_CONTROL)); |
| intel_de_write(dev_priv, PFIT_CONTROL, 0); |
| } |
| |
| static void i9xx_crtc_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* |
| * On gen2 planes are double buffered but the pipe isn't, so we must |
| * wait for planes to fully turn off before disabling the pipe. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2) |
| intel_wait_for_vblank(dev_priv, pipe); |
| |
| intel_encoders_disable(state, crtc); |
| |
| intel_crtc_vblank_off(old_crtc_state); |
| |
| intel_disable_transcoder(old_crtc_state); |
| |
| i9xx_pfit_disable(old_crtc_state); |
| |
| intel_encoders_post_disable(state, crtc); |
| |
| if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DSI)) { |
| if (IS_CHERRYVIEW(dev_priv)) |
| chv_disable_pll(dev_priv, pipe); |
| else if (IS_VALLEYVIEW(dev_priv)) |
| vlv_disable_pll(dev_priv, pipe); |
| else |
| i9xx_disable_pll(old_crtc_state); |
| } |
| |
| intel_encoders_post_pll_disable(state, crtc); |
| |
| if (DISPLAY_VER(dev_priv) != 2) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| if (!dev_priv->wm_disp->initial_watermarks) |
| intel_update_watermarks(dev_priv); |
| |
| /* clock the pipe down to 640x480@60 to potentially save power */ |
| if (IS_I830(dev_priv)) |
| i830_enable_pipe(dev_priv, pipe); |
| } |
| |
| static void intel_crtc_disable_noatomic(struct intel_crtc *crtc, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct intel_encoder *encoder; |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_bw_state *bw_state = |
| to_intel_bw_state(dev_priv->bw_obj.state); |
| struct intel_cdclk_state *cdclk_state = |
| to_intel_cdclk_state(dev_priv->cdclk.obj.state); |
| struct intel_dbuf_state *dbuf_state = |
| to_intel_dbuf_state(dev_priv->dbuf.obj.state); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane *plane; |
| struct drm_atomic_state *state; |
| struct intel_crtc_state *temp_crtc_state; |
| enum pipe pipe = crtc->pipe; |
| int ret; |
| |
| if (!crtc_state->hw.active) |
| return; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| if (plane_state->uapi.visible) |
| intel_plane_disable_noatomic(crtc, plane); |
| } |
| |
| state = drm_atomic_state_alloc(&dev_priv->drm); |
| if (!state) { |
| drm_dbg_kms(&dev_priv->drm, |
| "failed to disable [CRTC:%d:%s], out of memory", |
| crtc->base.base.id, crtc->base.name); |
| return; |
| } |
| |
| state->acquire_ctx = ctx; |
| |
| /* Everything's already locked, -EDEADLK can't happen. */ |
| temp_crtc_state = intel_atomic_get_crtc_state(state, crtc); |
| ret = drm_atomic_add_affected_connectors(state, &crtc->base); |
| |
| drm_WARN_ON(&dev_priv->drm, IS_ERR(temp_crtc_state) || ret); |
| |
| dev_priv->display->crtc_disable(to_intel_atomic_state(state), crtc); |
| |
| drm_atomic_state_put(state); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n", |
| crtc->base.base.id, crtc->base.name); |
| |
| crtc->active = false; |
| crtc->base.enabled = false; |
| |
| drm_WARN_ON(&dev_priv->drm, |
| drm_atomic_set_mode_for_crtc(&crtc_state->uapi, NULL) < 0); |
| crtc_state->uapi.active = false; |
| crtc_state->uapi.connector_mask = 0; |
| crtc_state->uapi.encoder_mask = 0; |
| intel_crtc_free_hw_state(crtc_state); |
| memset(&crtc_state->hw, 0, sizeof(crtc_state->hw)); |
| |
| for_each_encoder_on_crtc(&dev_priv->drm, &crtc->base, encoder) |
| encoder->base.crtc = NULL; |
| |
| intel_fbc_disable(crtc); |
| intel_update_watermarks(dev_priv); |
| intel_disable_shared_dpll(crtc_state); |
| |
| intel_display_power_put_all_in_set(dev_priv, &crtc->enabled_power_domains); |
| |
| cdclk_state->min_cdclk[pipe] = 0; |
| cdclk_state->min_voltage_level[pipe] = 0; |
| cdclk_state->active_pipes &= ~BIT(pipe); |
| |
| dbuf_state->active_pipes &= ~BIT(pipe); |
| |
| bw_state->data_rate[pipe] = 0; |
| bw_state->num_active_planes[pipe] = 0; |
| } |
| |
| /* |
| * turn all crtc's off, but do not adjust state |
| * This has to be paired with a call to intel_modeset_setup_hw_state. |
| */ |
| int intel_display_suspend(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct drm_atomic_state *state; |
| int ret; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return 0; |
| |
| state = drm_atomic_helper_suspend(dev); |
| ret = PTR_ERR_OR_ZERO(state); |
| if (ret) |
| drm_err(&dev_priv->drm, "Suspending crtc's failed with %i\n", |
| ret); |
| else |
| dev_priv->modeset_restore_state = state; |
| return ret; |
| } |
| |
| void intel_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| |
| drm_encoder_cleanup(encoder); |
| kfree(intel_encoder); |
| } |
| |
| /* Cross check the actual hw state with our own modeset state tracking (and it's |
| * internal consistency). */ |
| static void intel_connector_verify_state(struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s]\n", |
| connector->base.base.id, connector->base.name); |
| |
| if (connector->get_hw_state(connector)) { |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| |
| I915_STATE_WARN(!crtc_state, |
| "connector enabled without attached crtc\n"); |
| |
| if (!crtc_state) |
| return; |
| |
| I915_STATE_WARN(!crtc_state->hw.active, |
| "connector is active, but attached crtc isn't\n"); |
| |
| if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST) |
| return; |
| |
| I915_STATE_WARN(conn_state->best_encoder != &encoder->base, |
| "atomic encoder doesn't match attached encoder\n"); |
| |
| I915_STATE_WARN(conn_state->crtc != encoder->base.crtc, |
| "attached encoder crtc differs from connector crtc\n"); |
| } else { |
| I915_STATE_WARN(crtc_state && crtc_state->hw.active, |
| "attached crtc is active, but connector isn't\n"); |
| I915_STATE_WARN(!crtc_state && conn_state->best_encoder, |
| "best encoder set without crtc!\n"); |
| } |
| } |
| |
| bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| /* IPS only exists on ULT machines and is tied to pipe A. */ |
| if (!hsw_crtc_supports_ips(crtc)) |
| return false; |
| |
| if (!dev_priv->params.enable_ips) |
| return false; |
| |
| if (crtc_state->pipe_bpp > 24) |
| return false; |
| |
| /* |
| * We compare against max which means we must take |
| * the increased cdclk requirement into account when |
| * calculating the new cdclk. |
| * |
| * Should measure whether using a lower cdclk w/o IPS |
| */ |
| if (IS_BROADWELL(dev_priv) && |
| crtc_state->pixel_rate > dev_priv->max_cdclk_freq * 95 / 100) |
| return false; |
| |
| return true; |
| } |
| |
| static int hsw_compute_ips_config(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = |
| to_i915(crtc_state->uapi.crtc->dev); |
| struct intel_atomic_state *state = |
| to_intel_atomic_state(crtc_state->uapi.state); |
| |
| crtc_state->ips_enabled = false; |
| |
| if (!hsw_crtc_state_ips_capable(crtc_state)) |
| return 0; |
| |
| /* |
| * When IPS gets enabled, the pipe CRC changes. Since IPS gets |
| * enabled and disabled dynamically based on package C states, |
| * user space can't make reliable use of the CRCs, so let's just |
| * completely disable it. |
| */ |
| if (crtc_state->crc_enabled) |
| return 0; |
| |
| /* IPS should be fine as long as at least one plane is enabled. */ |
| if (!(crtc_state->active_planes & ~BIT(PLANE_CURSOR))) |
| return 0; |
| |
| if (IS_BROADWELL(dev_priv)) { |
| const struct intel_cdclk_state *cdclk_state; |
| |
| cdclk_state = intel_atomic_get_cdclk_state(state); |
| if (IS_ERR(cdclk_state)) |
| return PTR_ERR(cdclk_state); |
| |
| /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ |
| if (crtc_state->pixel_rate > cdclk_state->logical.cdclk * 95 / 100) |
| return 0; |
| } |
| |
| crtc_state->ips_enabled = true; |
| |
| return 0; |
| } |
| |
| static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc) |
| { |
| const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| /* GDG double wide on either pipe, otherwise pipe A only */ |
| return DISPLAY_VER(dev_priv) < 4 && |
| (crtc->pipe == PIPE_A || IS_I915G(dev_priv)); |
| } |
| |
| static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state) |
| { |
| u32 pixel_rate = crtc_state->hw.pipe_mode.crtc_clock; |
| struct drm_rect src; |
| |
| /* |
| * We only use IF-ID interlacing. If we ever use |
| * PF-ID we'll need to adjust the pixel_rate here. |
| */ |
| |
| if (!crtc_state->pch_pfit.enabled) |
| return pixel_rate; |
| |
| drm_rect_init(&src, 0, 0, |
| crtc_state->pipe_src_w << 16, |
| crtc_state->pipe_src_h << 16); |
| |
| return intel_adjusted_rate(&src, &crtc_state->pch_pfit.dst, |
| pixel_rate); |
| } |
| |
| static void intel_mode_from_crtc_timings(struct drm_display_mode *mode, |
| const struct drm_display_mode *timings) |
| { |
| mode->hdisplay = timings->crtc_hdisplay; |
| mode->htotal = timings->crtc_htotal; |
| mode->hsync_start = timings->crtc_hsync_start; |
| mode->hsync_end = timings->crtc_hsync_end; |
| |
| mode->vdisplay = timings->crtc_vdisplay; |
| mode->vtotal = timings->crtc_vtotal; |
| mode->vsync_start = timings->crtc_vsync_start; |
| mode->vsync_end = timings->crtc_vsync_end; |
| |
| mode->flags = timings->flags; |
| mode->type = DRM_MODE_TYPE_DRIVER; |
| |
| mode->clock = timings->crtc_clock; |
| |
| drm_mode_set_name(mode); |
| } |
| |
| static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (HAS_GMCH(dev_priv)) |
| /* FIXME calculate proper pipe pixel rate for GMCH pfit */ |
| crtc_state->pixel_rate = |
| crtc_state->hw.pipe_mode.crtc_clock; |
| else |
| crtc_state->pixel_rate = |
| ilk_pipe_pixel_rate(crtc_state); |
| } |
| |
| static void intel_crtc_readout_derived_state(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_display_mode *mode = &crtc_state->hw.mode; |
| struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode; |
| struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| |
| drm_mode_copy(pipe_mode, adjusted_mode); |
| |
| if (crtc_state->bigjoiner) { |
| /* |
| * transcoder is programmed to the full mode, |
| * but pipe timings are half of the transcoder mode |
| */ |
| pipe_mode->crtc_hdisplay /= 2; |
| pipe_mode->crtc_hblank_start /= 2; |
| pipe_mode->crtc_hblank_end /= 2; |
| pipe_mode->crtc_hsync_start /= 2; |
| pipe_mode->crtc_hsync_end /= 2; |
| pipe_mode->crtc_htotal /= 2; |
| pipe_mode->crtc_clock /= 2; |
| } |
| |
| if (crtc_state->splitter.enable) { |
| int n = crtc_state->splitter.link_count; |
| int overlap = crtc_state->splitter.pixel_overlap; |
| |
| /* |
| * eDP MSO uses segment timings from EDID for transcoder |
| * timings, but full mode for everything else. |
| * |
| * h_full = (h_segment - pixel_overlap) * link_count |
| */ |
| pipe_mode->crtc_hdisplay = (pipe_mode->crtc_hdisplay - overlap) * n; |
| pipe_mode->crtc_hblank_start = (pipe_mode->crtc_hblank_start - overlap) * n; |
| pipe_mode->crtc_hblank_end = (pipe_mode->crtc_hblank_end - overlap) * n; |
| pipe_mode->crtc_hsync_start = (pipe_mode->crtc_hsync_start - overlap) * n; |
| pipe_mode->crtc_hsync_end = (pipe_mode->crtc_hsync_end - overlap) * n; |
| pipe_mode->crtc_htotal = (pipe_mode->crtc_htotal - overlap) * n; |
| pipe_mode->crtc_clock *= n; |
| |
| intel_mode_from_crtc_timings(pipe_mode, pipe_mode); |
| intel_mode_from_crtc_timings(adjusted_mode, pipe_mode); |
| } else { |
| intel_mode_from_crtc_timings(pipe_mode, pipe_mode); |
| intel_mode_from_crtc_timings(adjusted_mode, adjusted_mode); |
| } |
| |
| intel_crtc_compute_pixel_rate(crtc_state); |
| |
| drm_mode_copy(mode, adjusted_mode); |
| mode->hdisplay = crtc_state->pipe_src_w << crtc_state->bigjoiner; |
| mode->vdisplay = crtc_state->pipe_src_h; |
| } |
| |
| static void intel_encoder_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| encoder->get_config(encoder, crtc_state); |
| |
| intel_crtc_readout_derived_state(crtc_state); |
| } |
| |
| static int intel_crtc_compute_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode; |
| int clock_limit = dev_priv->max_dotclk_freq; |
| |
| drm_mode_copy(pipe_mode, &pipe_config->hw.adjusted_mode); |
| |
| /* Adjust pipe_mode for bigjoiner, with half the horizontal mode */ |
| if (pipe_config->bigjoiner) { |
| pipe_mode->crtc_clock /= 2; |
| pipe_mode->crtc_hdisplay /= 2; |
| pipe_mode->crtc_hblank_start /= 2; |
| pipe_mode->crtc_hblank_end /= 2; |
| pipe_mode->crtc_hsync_start /= 2; |
| pipe_mode->crtc_hsync_end /= 2; |
| pipe_mode->crtc_htotal /= 2; |
| pipe_config->pipe_src_w /= 2; |
| } |
| |
| if (pipe_config->splitter.enable) { |
| int n = pipe_config->splitter.link_count; |
| int overlap = pipe_config->splitter.pixel_overlap; |
| |
| pipe_mode->crtc_hdisplay = (pipe_mode->crtc_hdisplay - overlap) * n; |
| pipe_mode->crtc_hblank_start = (pipe_mode->crtc_hblank_start - overlap) * n; |
| pipe_mode->crtc_hblank_end = (pipe_mode->crtc_hblank_end - overlap) * n; |
| pipe_mode->crtc_hsync_start = (pipe_mode->crtc_hsync_start - overlap) * n; |
| pipe_mode->crtc_hsync_end = (pipe_mode->crtc_hsync_end - overlap) * n; |
| pipe_mode->crtc_htotal = (pipe_mode->crtc_htotal - overlap) * n; |
| pipe_mode->crtc_clock *= n; |
| } |
| |
| intel_mode_from_crtc_timings(pipe_mode, pipe_mode); |
| |
| if (DISPLAY_VER(dev_priv) < 4) { |
| clock_limit = dev_priv->max_cdclk_freq * 9 / 10; |
| |
| /* |
| * Enable double wide mode when the dot clock |
| * is > 90% of the (display) core speed. |
| */ |
| if (intel_crtc_supports_double_wide(crtc) && |
| pipe_mode->crtc_clock > clock_limit) { |
| clock_limit = dev_priv->max_dotclk_freq; |
| pipe_config->double_wide = true; |
| } |
| } |
| |
| if (pipe_mode->crtc_clock > clock_limit) { |
| drm_dbg_kms(&dev_priv->drm, |
| "requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n", |
| pipe_mode->crtc_clock, clock_limit, |
| yesno(pipe_config->double_wide)); |
| return -EINVAL; |
| } |
| |
| /* |
| * Pipe horizontal size must be even in: |
| * - DVO ganged mode |
| * - LVDS dual channel mode |
| * - Double wide pipe |
| */ |
| if (pipe_config->pipe_src_w & 1) { |
| if (pipe_config->double_wide) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Odd pipe source width not supported with double wide pipe\n"); |
| return -EINVAL; |
| } |
| |
| if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) && |
| intel_is_dual_link_lvds(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Odd pipe source width not supported with dual link LVDS\n"); |
| return -EINVAL; |
| } |
| } |
| |
| intel_crtc_compute_pixel_rate(pipe_config); |
| |
| if (pipe_config->has_pch_encoder) |
| return ilk_fdi_compute_config(crtc, pipe_config); |
| |
| return 0; |
| } |
| |
| static void |
| intel_reduce_m_n_ratio(u32 *num, u32 *den) |
| { |
| while (*num > DATA_LINK_M_N_MASK || |
| *den > DATA_LINK_M_N_MASK) { |
| *num >>= 1; |
| *den >>= 1; |
| } |
| } |
| |
| static void compute_m_n(unsigned int m, unsigned int n, |
| u32 *ret_m, u32 *ret_n, |
| bool constant_n) |
| { |
| /* |
| * Several DP dongles in particular seem to be fussy about |
| * too large link M/N values. Give N value as 0x8000 that |
| * should be acceptable by specific devices. 0x8000 is the |
| * specified fixed N value for asynchronous clock mode, |
| * which the devices expect also in synchronous clock mode. |
| */ |
| if (constant_n) |
| *ret_n = DP_LINK_CONSTANT_N_VALUE; |
| else |
| *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX); |
| |
| *ret_m = div_u64(mul_u32_u32(m, *ret_n), n); |
| intel_reduce_m_n_ratio(ret_m, ret_n); |
| } |
| |
| void |
| intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, |
| int pixel_clock, int link_clock, |
| struct intel_link_m_n *m_n, |
| bool constant_n, bool fec_enable) |
| { |
| u32 data_clock = bits_per_pixel * pixel_clock; |
| |
| if (fec_enable) |
| data_clock = intel_dp_mode_to_fec_clock(data_clock); |
| |
| m_n->tu = 64; |
| compute_m_n(data_clock, |
| link_clock * nlanes * 8, |
| &m_n->gmch_m, &m_n->gmch_n, |
| constant_n); |
| |
| compute_m_n(pixel_clock, link_clock, |
| &m_n->link_m, &m_n->link_n, |
| constant_n); |
| } |
| |
| static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * There may be no VBT; and if the BIOS enabled SSC we can |
| * just keep using it to avoid unnecessary flicker. Whereas if the |
| * BIOS isn't using it, don't assume it will work even if the VBT |
| * indicates as much. |
| */ |
| if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) { |
| bool bios_lvds_use_ssc = intel_de_read(dev_priv, |
| PCH_DREF_CONTROL) & |
| DREF_SSC1_ENABLE; |
| |
| if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) { |
| drm_dbg_kms(&dev_priv->drm, |
| "SSC %s by BIOS, overriding VBT which says %s\n", |
| enableddisabled(bios_lvds_use_ssc), |
| enableddisabled(dev_priv->vbt.lvds_use_ssc)); |
| dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc; |
| } |
| } |
| } |
| |
| static void intel_pch_transcoder_set_m_n(const struct intel_crtc_state *crtc_state, |
| const struct intel_link_m_n *m_n) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| intel_de_write(dev_priv, PCH_TRANS_DATA_M1(pipe), |
| TU_SIZE(m_n->tu) | m_n->gmch_m); |
| intel_de_write(dev_priv, PCH_TRANS_DATA_N1(pipe), m_n->gmch_n); |
| intel_de_write(dev_priv, PCH_TRANS_LINK_M1(pipe), m_n->link_m); |
| intel_de_write(dev_priv, PCH_TRANS_LINK_N1(pipe), m_n->link_n); |
| } |
| |
| static bool transcoder_has_m2_n2(struct drm_i915_private *dev_priv, |
| enum transcoder transcoder) |
| { |
| if (IS_HASWELL(dev_priv)) |
| return transcoder == TRANSCODER_EDP; |
| |
| /* |
| * Strictly speaking some registers are available before |
| * gen7, but we only support DRRS on gen7+ |
| */ |
| return DISPLAY_VER(dev_priv) == 7 || IS_CHERRYVIEW(dev_priv); |
| } |
| |
| static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_state, |
| const struct intel_link_m_n *m_n, |
| const struct intel_link_m_n *m2_n2) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| enum transcoder transcoder = crtc_state->cpu_transcoder; |
| |
| if (DISPLAY_VER(dev_priv) >= 5) { |
| intel_de_write(dev_priv, PIPE_DATA_M1(transcoder), |
| TU_SIZE(m_n->tu) | m_n->gmch_m); |
| intel_de_write(dev_priv, PIPE_DATA_N1(transcoder), |
| m_n->gmch_n); |
| intel_de_write(dev_priv, PIPE_LINK_M1(transcoder), |
| m_n->link_m); |
| intel_de_write(dev_priv, PIPE_LINK_N1(transcoder), |
| m_n->link_n); |
| /* |
| * M2_N2 registers are set only if DRRS is supported |
| * (to make sure the registers are not unnecessarily accessed). |
| */ |
| if (m2_n2 && crtc_state->has_drrs && |
| transcoder_has_m2_n2(dev_priv, transcoder)) { |
| intel_de_write(dev_priv, PIPE_DATA_M2(transcoder), |
| TU_SIZE(m2_n2->tu) | m2_n2->gmch_m); |
| intel_de_write(dev_priv, PIPE_DATA_N2(transcoder), |
| m2_n2->gmch_n); |
| intel_de_write(dev_priv, PIPE_LINK_M2(transcoder), |
| m2_n2->link_m); |
| intel_de_write(dev_priv, PIPE_LINK_N2(transcoder), |
| m2_n2->link_n); |
| } |
| } else { |
| intel_de_write(dev_priv, PIPE_DATA_M_G4X(pipe), |
| TU_SIZE(m_n->tu) | m_n->gmch_m); |
| intel_de_write(dev_priv, PIPE_DATA_N_G4X(pipe), m_n->gmch_n); |
| intel_de_write(dev_priv, PIPE_LINK_M_G4X(pipe), m_n->link_m); |
| intel_de_write(dev_priv, PIPE_LINK_N_G4X(pipe), m_n->link_n); |
| } |
| } |
| |
| void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_set m_n) |
| { |
| const struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL; |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (m_n == M1_N1) { |
| dp_m_n = &crtc_state->dp_m_n; |
| dp_m2_n2 = &crtc_state->dp_m2_n2; |
| } else if (m_n == M2_N2) { |
| |
| /* |
| * M2_N2 registers are not supported. Hence m2_n2 divider value |
| * needs to be programmed into M1_N1. |
| */ |
| dp_m_n = &crtc_state->dp_m2_n2; |
| } else { |
| drm_err(&i915->drm, "Unsupported divider value\n"); |
| return; |
| } |
| |
| if (crtc_state->has_pch_encoder) |
| intel_pch_transcoder_set_m_n(crtc_state, &crtc_state->dp_m_n); |
| else |
| intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2); |
| } |
| |
| static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| u32 crtc_vtotal, crtc_vblank_end; |
| int vsyncshift = 0; |
| |
| /* We need to be careful not to changed the adjusted mode, for otherwise |
| * the hw state checker will get angry at the mismatch. */ |
| crtc_vtotal = adjusted_mode->crtc_vtotal; |
| crtc_vblank_end = adjusted_mode->crtc_vblank_end; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| /* the chip adds 2 halflines automatically */ |
| crtc_vtotal -= 1; |
| crtc_vblank_end -= 1; |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2; |
| else |
| vsyncshift = adjusted_mode->crtc_hsync_start - |
| adjusted_mode->crtc_htotal / 2; |
| if (vsyncshift < 0) |
| vsyncshift += adjusted_mode->crtc_htotal; |
| } |
| |
| if (DISPLAY_VER(dev_priv) > 3) |
| intel_de_write(dev_priv, VSYNCSHIFT(cpu_transcoder), |
| vsyncshift); |
| |
| intel_de_write(dev_priv, HTOTAL(cpu_transcoder), |
| (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); |
| intel_de_write(dev_priv, HBLANK(cpu_transcoder), |
| (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); |
| intel_de_write(dev_priv, HSYNC(cpu_transcoder), |
| (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); |
| |
| intel_de_write(dev_priv, VTOTAL(cpu_transcoder), |
| (adjusted_mode->crtc_vdisplay - 1) | ((crtc_vtotal - 1) << 16)); |
| intel_de_write(dev_priv, VBLANK(cpu_transcoder), |
| (adjusted_mode->crtc_vblank_start - 1) | ((crtc_vblank_end - 1) << 16)); |
| intel_de_write(dev_priv, VSYNC(cpu_transcoder), |
| (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); |
| |
| /* Workaround: when the EDP input selection is B, the VTOTAL_B must be |
| * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is |
| * documented on the DDI_FUNC_CTL register description, EDP Input Select |
| * bits. */ |
| if (IS_HASWELL(dev_priv) && cpu_transcoder == TRANSCODER_EDP && |
| (pipe == PIPE_B || pipe == PIPE_C)) |
| intel_de_write(dev_priv, VTOTAL(pipe), |
| intel_de_read(dev_priv, VTOTAL(cpu_transcoder))); |
| |
| } |
| |
| static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* pipesrc controls the size that is scaled from, which should |
| * always be the user's requested size. |
| */ |
| intel_de_write(dev_priv, PIPESRC(pipe), |
| ((crtc_state->pipe_src_w - 1) << 16) | (crtc_state->pipe_src_h - 1)); |
| } |
| |
| static bool intel_pipe_is_interlaced(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (DISPLAY_VER(dev_priv) == 2) |
| return false; |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) |
| return intel_de_read(dev_priv, PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK_HSW; |
| else |
| return intel_de_read(dev_priv, PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK; |
| } |
| |
| static void intel_get_transcoder_timings(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, HTOTAL(cpu_transcoder)); |
| pipe_config->hw.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1; |
| pipe_config->hw.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1; |
| |
| if (!transcoder_is_dsi(cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, HBLANK(cpu_transcoder)); |
| pipe_config->hw.adjusted_mode.crtc_hblank_start = |
| (tmp & 0xffff) + 1; |
| pipe_config->hw.adjusted_mode.crtc_hblank_end = |
| ((tmp >> 16) & 0xffff) + 1; |
| } |
| tmp = intel_de_read(dev_priv, HSYNC(cpu_transcoder)); |
| pipe_config->hw.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1; |
| pipe_config->hw.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1; |
| |
| tmp = intel_de_read(dev_priv, VTOTAL(cpu_transcoder)); |
| pipe_config->hw.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1; |
| pipe_config->hw.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1; |
| |
| if (!transcoder_is_dsi(cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, VBLANK(cpu_transcoder)); |
| pipe_config->hw.adjusted_mode.crtc_vblank_start = |
| (tmp & 0xffff) + 1; |
| pipe_config->hw.adjusted_mode.crtc_vblank_end = |
| ((tmp >> 16) & 0xffff) + 1; |
| } |
| tmp = intel_de_read(dev_priv, VSYNC(cpu_transcoder)); |
| pipe_config->hw.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1; |
| pipe_config->hw.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1; |
| |
| if (intel_pipe_is_interlaced(pipe_config)) { |
| pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE; |
| pipe_config->hw.adjusted_mode.crtc_vtotal += 1; |
| pipe_config->hw.adjusted_mode.crtc_vblank_end += 1; |
| } |
| } |
| |
| static void intel_get_pipe_src_size(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPESRC(crtc->pipe)); |
| pipe_config->pipe_src_h = (tmp & 0xffff) + 1; |
| pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1; |
| } |
| |
| static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 pipeconf; |
| |
| pipeconf = 0; |
| |
| /* we keep both pipes enabled on 830 */ |
| if (IS_I830(dev_priv)) |
| pipeconf |= intel_de_read(dev_priv, PIPECONF(crtc->pipe)) & PIPECONF_ENABLE; |
| |
| if (crtc_state->double_wide) |
| pipeconf |= PIPECONF_DOUBLE_WIDE; |
| |
| /* only g4x and later have fancy bpc/dither controls */ |
| if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) { |
| /* Bspec claims that we can't use dithering for 30bpp pipes. */ |
| if (crtc_state->dither && crtc_state->pipe_bpp != 30) |
| pipeconf |= PIPECONF_DITHER_EN | |
| PIPECONF_DITHER_TYPE_SP; |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| pipeconf |= PIPECONF_6BPC; |
| break; |
| case 24: |
| pipeconf |= PIPECONF_8BPC; |
| break; |
| case 30: |
| pipeconf |= PIPECONF_10BPC; |
| break; |
| default: |
| /* Case prevented by intel_choose_pipe_bpp_dither. */ |
| BUG(); |
| } |
| } |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) { |
| if (DISPLAY_VER(dev_priv) < 4 || |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; |
| else |
| pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT; |
| } else { |
| pipeconf |= PIPECONF_PROGRESSIVE; |
| } |
| |
| if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && |
| crtc_state->limited_color_range) |
| pipeconf |= PIPECONF_COLOR_RANGE_SELECT; |
| |
| pipeconf |= PIPECONF_GAMMA_MODE(crtc_state->gamma_mode); |
| |
| pipeconf |= PIPECONF_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| |
| intel_de_write(dev_priv, PIPECONF(crtc->pipe), pipeconf); |
| intel_de_posting_read(dev_priv, PIPECONF(crtc->pipe)); |
| } |
| |
| static bool i9xx_has_pfit(struct drm_i915_private *dev_priv) |
| { |
| if (IS_I830(dev_priv)) |
| return false; |
| |
| return DISPLAY_VER(dev_priv) >= 4 || |
| IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); |
| } |
| |
| static void i9xx_get_pfit_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 tmp; |
| |
| if (!i9xx_has_pfit(dev_priv)) |
| return; |
| |
| tmp = intel_de_read(dev_priv, PFIT_CONTROL); |
| if (!(tmp & PFIT_ENABLE)) |
| return; |
| |
| /* Check whether the pfit is attached to our pipe. */ |
| if (DISPLAY_VER(dev_priv) < 4) { |
| if (crtc->pipe != PIPE_B) |
| return; |
| } else { |
| if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT)) |
| return; |
| } |
| |
| crtc_state->gmch_pfit.control = tmp; |
| crtc_state->gmch_pfit.pgm_ratios = |
| intel_de_read(dev_priv, PFIT_PGM_RATIOS); |
| } |
| |
| static void vlv_crtc_clock_get(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum pipe pipe = crtc->pipe; |
| struct dpll clock; |
| u32 mdiv; |
| int refclk = 100000; |
| |
| /* In case of DSI, DPLL will not be used */ |
| if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) |
| return; |
| |
| vlv_dpio_get(dev_priv); |
| mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe)); |
| vlv_dpio_put(dev_priv); |
| |
| clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7; |
| clock.m2 = mdiv & DPIO_M2DIV_MASK; |
| clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf; |
| clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7; |
| clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f; |
| |
| pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock); |
| } |
| |
| static void chv_crtc_clock_get(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum pipe pipe = crtc->pipe; |
| enum dpio_channel port = vlv_pipe_to_channel(pipe); |
| struct dpll clock; |
| u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3; |
| int refclk = 100000; |
| |
| /* In case of DSI, DPLL will not be used */ |
| if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) |
| return; |
| |
| vlv_dpio_get(dev_priv); |
| cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port)); |
| pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port)); |
| pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port)); |
| pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port)); |
| pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port)); |
| vlv_dpio_put(dev_priv); |
| |
| clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0; |
| clock.m2 = (pll_dw0 & 0xff) << 22; |
| if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN) |
| clock.m2 |= pll_dw2 & 0x3fffff; |
| clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf; |
| clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7; |
| clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f; |
| |
| pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock); |
| } |
| |
| static enum intel_output_format |
| bdw_get_pipemisc_output_format(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe)); |
| |
| if (tmp & PIPEMISC_YUV420_ENABLE) { |
| /* We support 4:2:0 in full blend mode only */ |
| drm_WARN_ON(&dev_priv->drm, |
| (tmp & PIPEMISC_YUV420_MODE_FULL_BLEND) == 0); |
| |
| return INTEL_OUTPUT_FORMAT_YCBCR420; |
| } else if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) { |
| return INTEL_OUTPUT_FORMAT_YCBCR444; |
| } else { |
| return INTEL_OUTPUT_FORMAT_RGB; |
| } |
| } |
| |
| static void i9xx_get_pipe_color_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct intel_plane *plane = to_intel_plane(crtc->base.primary); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum i9xx_plane_id i9xx_plane = plane->i9xx_plane; |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, DSPCNTR(i9xx_plane)); |
| |
| if (tmp & DISPPLANE_GAMMA_ENABLE) |
| crtc_state->gamma_enable = true; |
| |
| if (!HAS_GMCH(dev_priv) && |
| tmp & DISPPLANE_PIPE_CSC_ENABLE) |
| crtc_state->csc_enable = true; |
| } |
| |
| static bool i9xx_get_pipe_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| u32 tmp; |
| bool ret; |
| |
| power_domain = POWER_DOMAIN_PIPE(crtc->pipe); |
| wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); |
| if (!wakeref) |
| return false; |
| |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| pipe_config->shared_dpll = NULL; |
| |
| ret = false; |
| |
| tmp = intel_de_read(dev_priv, PIPECONF(crtc->pipe)); |
| if (!(tmp & PIPECONF_ENABLE)) |
| goto out; |
| |
| if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) { |
| switch (tmp & PIPECONF_BPC_MASK) { |
| case PIPECONF_6BPC: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case PIPECONF_8BPC: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case PIPECONF_10BPC: |
| pipe_config->pipe_bpp = 30; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && |
| (tmp & PIPECONF_COLOR_RANGE_SELECT)) |
| pipe_config->limited_color_range = true; |
| |
| pipe_config->gamma_mode = (tmp & PIPECONF_GAMMA_MODE_MASK_I9XX) >> |
| PIPECONF_GAMMA_MODE_SHIFT; |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| pipe_config->cgm_mode = intel_de_read(dev_priv, |
| CGM_PIPE_MODE(crtc->pipe)); |
| |
| i9xx_get_pipe_color_config(pipe_config); |
| intel_color_get_config(pipe_config); |
| |
| if (DISPLAY_VER(dev_priv) < 4) |
| pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE; |
| |
| intel_get_transcoder_timings(crtc, pipe_config); |
| intel_get_pipe_src_size(crtc, pipe_config); |
| |
| i9xx_get_pfit_config(pipe_config); |
| |
| if (DISPLAY_VER(dev_priv) >= 4) { |
| /* No way to read it out on pipes B and C */ |
| if (IS_CHERRYVIEW(dev_priv) && crtc->pipe != PIPE_A) |
| tmp = dev_priv->chv_dpll_md[crtc->pipe]; |
| else |
| tmp = intel_de_read(dev_priv, DPLL_MD(crtc->pipe)); |
| pipe_config->pixel_multiplier = |
| ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK) |
| >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1; |
| pipe_config->dpll_hw_state.dpll_md = tmp; |
| } else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || |
| IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) { |
| tmp = intel_de_read(dev_priv, DPLL(crtc->pipe)); |
| pipe_config->pixel_multiplier = |
| ((tmp & SDVO_MULTIPLIER_MASK) |
| >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1; |
| } else { |
| /* Note that on i915G/GM the pixel multiplier is in the sdvo |
| * port and will be fixed up in the encoder->get_config |
| * function. */ |
| pipe_config->pixel_multiplier = 1; |
| } |
| pipe_config->dpll_hw_state.dpll = intel_de_read(dev_priv, |
| DPLL(crtc->pipe)); |
| if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) { |
| pipe_config->dpll_hw_state.fp0 = intel_de_read(dev_priv, |
| FP0(crtc->pipe)); |
| pipe_config->dpll_hw_state.fp1 = intel_de_read(dev_priv, |
| FP1(crtc->pipe)); |
| } else { |
| /* Mask out read-only status bits. */ |
| pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV | |
| DPLL_PORTC_READY_MASK | |
| DPLL_PORTB_READY_MASK); |
| } |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| chv_crtc_clock_get(crtc, pipe_config); |
| else if (IS_VALLEYVIEW(dev_priv)) |
| vlv_crtc_clock_get(crtc, pipe_config); |
| else |
| i9xx_crtc_clock_get(crtc, pipe_config); |
| |
| /* |
| * Normally the dotclock is filled in by the encoder .get_config() |
| * but in case the pipe is enabled w/o any ports we need a sane |
| * default. |
| */ |
| pipe_config->hw.adjusted_mode.crtc_clock = |
| pipe_config->port_clock / pipe_config->pixel_multiplier; |
| |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, power_domain, wakeref); |
| |
| return ret; |
| } |
| |
| static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| int i; |
| u32 val, final; |
| bool has_lvds = false; |
| bool has_cpu_edp = false; |
| bool has_panel = false; |
| bool has_ck505 = false; |
| bool can_ssc = false; |
| bool using_ssc_source = false; |
| |
| /* We need to take the global config into account */ |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| switch (encoder->type) { |
| case INTEL_OUTPUT_LVDS: |
| has_panel = true; |
| has_lvds = true; |
| break; |
| case INTEL_OUTPUT_EDP: |
| has_panel = true; |
| if (encoder->port == PORT_A) |
| has_cpu_edp = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (HAS_PCH_IBX(dev_priv)) { |
| has_ck505 = dev_priv->vbt.display_clock_mode; |
| can_ssc = has_ck505; |
| } else { |
| has_ck505 = false; |
| can_ssc = true; |
| } |
| |
| /* Check if any DPLLs are using the SSC source */ |
| for (i = 0; i < dev_priv->dpll.num_shared_dpll; i++) { |
| u32 temp = intel_de_read(dev_priv, PCH_DPLL(i)); |
| |
| if (!(temp & DPLL_VCO_ENABLE)) |
| continue; |
| |
| if ((temp & PLL_REF_INPUT_MASK) == |
| PLLB_REF_INPUT_SPREADSPECTRUMIN) { |
| using_ssc_source = true; |
| break; |
| } |
| } |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n", |
| has_panel, has_lvds, has_ck505, using_ssc_source); |
| |
| /* Ironlake: try to setup display ref clock before DPLL |
| * enabling. This is only under driver's control after |
| * PCH B stepping, previous chipset stepping should be |
| * ignoring this setting. |
| */ |
| val = intel_de_read(dev_priv, PCH_DREF_CONTROL); |
| |
| /* As we must carefully and slowly disable/enable each source in turn, |
| * compute the final state we want first and check if we need to |
| * make any changes at all. |
| */ |
| final = val; |
| final &= ~DREF_NONSPREAD_SOURCE_MASK; |
| if (has_ck505) |
| final |= DREF_NONSPREAD_CK505_ENABLE; |
| else |
| final |= DREF_NONSPREAD_SOURCE_ENABLE; |
| |
| final &= ~DREF_SSC_SOURCE_MASK; |
| final &= ~DREF_CPU_SOURCE_OUTPUT_MASK; |
| final &= ~DREF_SSC1_ENABLE; |
| |
| if (has_panel) { |
| final |= DREF_SSC_SOURCE_ENABLE; |
| |
| if (intel_panel_use_ssc(dev_priv) && can_ssc) |
| final |= DREF_SSC1_ENABLE; |
| |
| if (has_cpu_edp) { |
| if (intel_panel_use_ssc(dev_priv) && can_ssc) |
| final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; |
| else |
| final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; |
| } else |
| final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| } else if (using_ssc_source) { |
| final |= DREF_SSC_SOURCE_ENABLE; |
| final |= DREF_SSC1_ENABLE; |
| } |
| |
| if (final == val) |
| return; |
| |
| /* Always enable nonspread source */ |
| val &= ~DREF_NONSPREAD_SOURCE_MASK; |
| |
| if (has_ck505) |
| val |= DREF_NONSPREAD_CK505_ENABLE; |
| else |
| val |= DREF_NONSPREAD_SOURCE_ENABLE; |
| |
| if (has_panel) { |
| val &= ~DREF_SSC_SOURCE_MASK; |
| val |= DREF_SSC_SOURCE_ENABLE; |
| |
| /* SSC must be turned on before enabling the CPU output */ |
| if (intel_panel_use_ssc(dev_priv) && can_ssc) { |
| drm_dbg_kms(&dev_priv->drm, "Using SSC on panel\n"); |
| val |= DREF_SSC1_ENABLE; |
| } else |
| val &= ~DREF_SSC1_ENABLE; |
| |
| /* Get SSC going before enabling the outputs */ |
| intel_de_write(dev_priv, PCH_DREF_CONTROL, val); |
| intel_de_posting_read(dev_priv, PCH_DREF_CONTROL); |
| udelay(200); |
| |
| val &= ~DREF_CPU_SOURCE_OUTPUT_MASK; |
| |
| /* Enable CPU source on CPU attached eDP */ |
| if (has_cpu_edp) { |
| if (intel_panel_use_ssc(dev_priv) && can_ssc) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Using SSC on eDP\n"); |
| val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; |
| } else |
| val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; |
| } else |
| val |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| |
| intel_de_write(dev_priv, PCH_DREF_CONTROL, val); |
| intel_de_posting_read(dev_priv, PCH_DREF_CONTROL); |
| udelay(200); |
| } else { |
| drm_dbg_kms(&dev_priv->drm, "Disabling CPU source output\n"); |
| |
| val &= ~DREF_CPU_SOURCE_OUTPUT_MASK; |
| |
| /* Turn off CPU output */ |
| val |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| |
| intel_de_write(dev_priv, PCH_DREF_CONTROL, val); |
| intel_de_posting_read(dev_priv, PCH_DREF_CONTROL); |
| udelay(200); |
| |
| if (!using_ssc_source) { |
| drm_dbg_kms(&dev_priv->drm, "Disabling SSC source\n"); |
| |
| /* Turn off the SSC source */ |
| val &= ~DREF_SSC_SOURCE_MASK; |
| val |= DREF_SSC_SOURCE_DISABLE; |
| |
| /* Turn off SSC1 */ |
| val &= ~DREF_SSC1_ENABLE; |
| |
| intel_de_write(dev_priv, PCH_DREF_CONTROL, val); |
| intel_de_posting_read(dev_priv, PCH_DREF_CONTROL); |
| udelay(200); |
| } |
| } |
| |
| BUG_ON(val != final); |
| } |
| |
| /* Implements 3 different sequences from BSpec chapter "Display iCLK |
| * Programming" based on the parameters passed: |
| * - Sequence to enable CLKOUT_DP |
| * - Sequence to enable CLKOUT_DP without spread |
| * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O |
| */ |
| static void lpt_enable_clkout_dp(struct drm_i915_private *dev_priv, |
| bool with_spread, bool with_fdi) |
| { |
| u32 reg, tmp; |
| |
| if (drm_WARN(&dev_priv->drm, with_fdi && !with_spread, |
| "FDI requires downspread\n")) |
| with_spread = true; |
| if (drm_WARN(&dev_priv->drm, HAS_PCH_LPT_LP(dev_priv) && |
| with_fdi, "LP PCH doesn't have FDI\n")) |
| with_fdi = false; |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK); |
| tmp &= ~SBI_SSCCTL_DISABLE; |
| tmp |= SBI_SSCCTL_PATHALT; |
| intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| |
| udelay(24); |
| |
| if (with_spread) { |
| tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK); |
| tmp &= ~SBI_SSCCTL_PATHALT; |
| intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| |
| if (with_fdi) |
| lpt_fdi_program_mphy(dev_priv); |
| } |
| |
| reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0; |
| tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK); |
| tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE; |
| intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK); |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| } |
| |
| /* Sequence to disable CLKOUT_DP */ |
| void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv) |
| { |
| u32 reg, tmp; |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0; |
| tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK); |
| tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE; |
| intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK); |
| |
| tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK); |
| if (!(tmp & SBI_SSCCTL_DISABLE)) { |
| if (!(tmp & SBI_SSCCTL_PATHALT)) { |
| tmp |= SBI_SSCCTL_PATHALT; |
| intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| udelay(32); |
| } |
| tmp |= SBI_SSCCTL_DISABLE; |
| intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| } |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| } |
| |
| #define BEND_IDX(steps) ((50 + (steps)) / 5) |
| |
| static const u16 sscdivintphase[] = { |
| [BEND_IDX( 50)] = 0x3B23, |
| [BEND_IDX( 45)] = 0x3B23, |
| [BEND_IDX( 40)] = 0x3C23, |
| [BEND_IDX( 35)] = 0x3C23, |
| [BEND_IDX( 30)] = 0x3D23, |
| [BEND_IDX( 25)] = 0x3D23, |
| [BEND_IDX( 20)] = 0x3E23, |
| [BEND_IDX( 15)] = 0x3E23, |
| [BEND_IDX( 10)] = 0x3F23, |
| [BEND_IDX( 5)] = 0x3F23, |
| [BEND_IDX( 0)] = 0x0025, |
| [BEND_IDX( -5)] = 0x0025, |
| [BEND_IDX(-10)] = 0x0125, |
| [BEND_IDX(-15)] = 0x0125, |
| [BEND_IDX(-20)] = 0x0225, |
| [BEND_IDX(-25)] = 0x0225, |
| [BEND_IDX(-30)] = 0x0325, |
| [BEND_IDX(-35)] = 0x0325, |
| [BEND_IDX(-40)] = 0x0425, |
| [BEND_IDX(-45)] = 0x0425, |
| [BEND_IDX(-50)] = 0x0525, |
| }; |
| |
| /* |
| * Bend CLKOUT_DP |
| * steps -50 to 50 inclusive, in steps of 5 |
| * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz) |
| * change in clock period = -(steps / 10) * 5.787 ps |
| */ |
| static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps) |
| { |
| u32 tmp; |
| int idx = BEND_IDX(steps); |
| |
| if (drm_WARN_ON(&dev_priv->drm, steps % 5 != 0)) |
| return; |
| |
| if (drm_WARN_ON(&dev_priv->drm, idx >= ARRAY_SIZE(sscdivintphase))) |
| return; |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| if (steps % 10 != 0) |
| tmp = 0xAAAAAAAB; |
| else |
| tmp = 0x00000000; |
| intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK); |
| |
| tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK); |
| tmp &= 0xffff0000; |
| tmp |= sscdivintphase[idx]; |
| intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK); |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| } |
| |
| #undef BEND_IDX |
| |
| static bool spll_uses_pch_ssc(struct drm_i915_private *dev_priv) |
| { |
| u32 fuse_strap = intel_de_read(dev_priv, FUSE_STRAP); |
| u32 ctl = intel_de_read(dev_priv, SPLL_CTL); |
| |
| if ((ctl & SPLL_PLL_ENABLE) == 0) |
| return false; |
| |
| if ((ctl & SPLL_REF_MASK) == SPLL_REF_MUXED_SSC && |
| (fuse_strap & HSW_CPU_SSC_ENABLE) == 0) |
| return true; |
| |
| if (IS_BROADWELL(dev_priv) && |
| (ctl & SPLL_REF_MASK) == SPLL_REF_PCH_SSC_BDW) |
| return true; |
| |
| return false; |
| } |
| |
| static bool wrpll_uses_pch_ssc(struct drm_i915_private *dev_priv, |
| enum intel_dpll_id id) |
| { |
| u32 fuse_strap = intel_de_read(dev_priv, FUSE_STRAP); |
| u32 ctl = intel_de_read(dev_priv, WRPLL_CTL(id)); |
| |
| if ((ctl & WRPLL_PLL_ENABLE) == 0) |
| return false; |
| |
| if ((ctl & WRPLL_REF_MASK) == WRPLL_REF_PCH_SSC) |
| return true; |
| |
| if ((IS_BROADWELL(dev_priv) || IS_HSW_ULT(dev_priv)) && |
| (ctl & WRPLL_REF_MASK) == WRPLL_REF_MUXED_SSC_BDW && |
| (fuse_strap & HSW_CPU_SSC_ENABLE) == 0) |
| return true; |
| |
| return false; |
| } |
| |
| static void lpt_init_pch_refclk(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| bool has_fdi = false; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| switch (encoder->type) { |
| case INTEL_OUTPUT_ANALOG: |
| has_fdi = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * The BIOS may have decided to use the PCH SSC |
| * reference so we must not disable it until the |
| * relevant PLLs have stopped relying on it. We'll |
| * just leave the PCH SSC reference enabled in case |
| * any active PLL is using it. It will get disabled |
| * after runtime suspend if we don't have FDI. |
| * |
| * TODO: Move the whole reference clock handling |
| * to the modeset sequence proper so that we can |
| * actually enable/disable/reconfigure these things |
| * safely. To do that we need to introduce a real |
| * clock hierarchy. That would also allow us to do |
| * clock bending finally. |
| */ |
| dev_priv->pch_ssc_use = 0; |
| |
| if (spll_uses_pch_ssc(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, "SPLL using PCH SSC\n"); |
| dev_priv->pch_ssc_use |= BIT(DPLL_ID_SPLL); |
| } |
| |
| if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL1)) { |
| drm_dbg_kms(&dev_priv->drm, "WRPLL1 using PCH SSC\n"); |
| dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL1); |
| } |
| |
| if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL2)) { |
| drm_dbg_kms(&dev_priv->drm, "WRPLL2 using PCH SSC\n"); |
| dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL2); |
| } |
| |
| if (dev_priv->pch_ssc_use) |
| return; |
| |
| if (has_fdi) { |
| lpt_bend_clkout_dp(dev_priv, 0); |
| lpt_enable_clkout_dp(dev_priv, true, true); |
| } else { |
| lpt_disable_clkout_dp(dev_priv); |
| } |
| } |
| |
| /* |
| * Initialize reference clocks when the driver loads |
| */ |
| void intel_init_pch_refclk(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) |
| ilk_init_pch_refclk(dev_priv); |
| else if (HAS_PCH_LPT(dev_priv)) |
| lpt_init_pch_refclk(dev_priv); |
| } |
| |
| static void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 val; |
| |
| val = 0; |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| val |= PIPECONF_6BPC; |
| break; |
| case 24: |
| val |= PIPECONF_8BPC; |
| break; |
| case 30: |
| val |= PIPECONF_10BPC; |
| break; |
| case 36: |
| val |= PIPECONF_12BPC; |
| break; |
| default: |
| /* Case prevented by intel_choose_pipe_bpp_dither. */ |
| BUG(); |
| } |
| |
| if (crtc_state->dither) |
| val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| val |= PIPECONF_INTERLACED_ILK; |
| else |
| val |= PIPECONF_PROGRESSIVE; |
| |
| /* |
| * This would end up with an odd purple hue over |
| * the entire display. Make sure we don't do it. |
| */ |
| drm_WARN_ON(&dev_priv->drm, crtc_state->limited_color_range && |
| crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB); |
| |
| if (crtc_state->limited_color_range && |
| !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| val |= PIPECONF_COLOR_RANGE_SELECT; |
| |
| if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) |
| val |= PIPECONF_OUTPUT_COLORSPACE_YUV709; |
| |
| val |= PIPECONF_GAMMA_MODE(crtc_state->gamma_mode); |
| |
| val |= PIPECONF_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| |
| intel_de_write(dev_priv, PIPECONF(pipe), val); |
| intel_de_posting_read(dev_priv, PIPECONF(pipe)); |
| } |
| |
| static void hsw_set_transconf(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 val = 0; |
| |
| if (IS_HASWELL(dev_priv) && crtc_state->dither) |
| val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| val |= PIPECONF_INTERLACED_ILK; |
| else |
| val |= PIPECONF_PROGRESSIVE; |
| |
| if (IS_HASWELL(dev_priv) && |
| crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) |
| val |= PIPECONF_OUTPUT_COLORSPACE_YUV_HSW; |
| |
| intel_de_write(dev_priv, PIPECONF(cpu_transcoder), val); |
| intel_de_posting_read(dev_priv, PIPECONF(cpu_transcoder)); |
| } |
| |
| static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| const struct intel_crtc_scaler_state *scaler_state = |
| &crtc_state->scaler_state; |
| |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 val = 0; |
| int i; |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| val |= PIPEMISC_6_BPC; |
| break; |
| case 24: |
| val |= PIPEMISC_8_BPC; |
| break; |
| case 30: |
| val |= PIPEMISC_10_BPC; |
| break; |
| case 36: |
| /* Port output 12BPC defined for ADLP+ */ |
| if (DISPLAY_VER(dev_priv) > 12) |
| val |= PIPEMISC_12_BPC_ADLP; |
| break; |
| default: |
| MISSING_CASE(crtc_state->pipe_bpp); |
| break; |
| } |
| |
| if (crtc_state->dither) |
| val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP; |
| |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || |
| crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) |
| val |= PIPEMISC_OUTPUT_COLORSPACE_YUV; |
| |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| val |= PIPEMISC_YUV420_ENABLE | |
| PIPEMISC_YUV420_MODE_FULL_BLEND; |
| |
| if (DISPLAY_VER(dev_priv) >= 11 && is_hdr_mode(crtc_state)) |
| val |= PIPEMISC_HDR_MODE_PRECISION; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| val |= PIPEMISC_PIXEL_ROUNDING_TRUNC; |
| |
| if (IS_ALDERLAKE_P(dev_priv)) { |
| bool scaler_in_use = false; |
| |
| for (i = 0; i < crtc->num_scalers; i++) { |
| if (!scaler_state->scalers[i].in_use) |
| continue; |
| |
| scaler_in_use = true; |
| break; |
| } |
| |
| intel_de_rmw(dev_priv, PIPE_MISC2(crtc->pipe), |
| PIPE_MISC2_UNDERRUN_BUBBLE_COUNTER_MASK, |
| scaler_in_use ? PIPE_MISC2_BUBBLE_COUNTER_SCALER_EN : |
| PIPE_MISC2_BUBBLE_COUNTER_SCALER_DIS); |
| } |
| |
| intel_de_write(dev_priv, PIPEMISC(crtc->pipe), val); |
| } |
| |
| int bdw_get_pipemisc_bpp(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe)); |
| |
| switch (tmp & PIPEMISC_BPC_MASK) { |
| case PIPEMISC_6_BPC: |
| return 18; |
| case PIPEMISC_8_BPC: |
| return 24; |
| case PIPEMISC_10_BPC: |
| return 30; |
| /* |
| * PORT OUTPUT 12 BPC defined for ADLP+. |
| * |
| * TODO: |
| * For previous platforms with DSI interface, bits 5:7 |
| * are used for storing pipe_bpp irrespective of dithering. |
| * Since the value of 12 BPC is not defined for these bits |
| * on older platforms, need to find a workaround for 12 BPC |
| * MIPI DSI HW readout. |
| */ |
| case PIPEMISC_12_BPC_ADLP: |
| if (DISPLAY_VER(dev_priv) > 12) |
| return 36; |
| fallthrough; |
| default: |
| MISSING_CASE(tmp); |
| return 0; |
| } |
| } |
| |
| int ilk_get_lanes_required(int target_clock, int link_bw, int bpp) |
| { |
| /* |
| * Account for spread spectrum to avoid |
| * oversubscribing the link. Max center spread |
| * is 2.5%; use 5% for safety's sake. |
| */ |
| u32 bps = target_clock * bpp * 21 / 20; |
| return DIV_ROUND_UP(bps, link_bw * 8); |
| } |
| |
| static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc, |
| struct intel_link_m_n *m_n) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum pipe pipe = crtc->pipe; |
| |
| m_n->link_m = intel_de_read(dev_priv, PCH_TRANS_LINK_M1(pipe)); |
| m_n->link_n = intel_de_read(dev_priv, PCH_TRANS_LINK_N1(pipe)); |
| m_n->gmch_m = intel_de_read(dev_priv, PCH_TRANS_DATA_M1(pipe)) |
| & ~TU_SIZE_MASK; |
| m_n->gmch_n = intel_de_read(dev_priv, PCH_TRANS_DATA_N1(pipe)); |
| m_n->tu = ((intel_de_read(dev_priv, PCH_TRANS_DATA_M1(pipe)) |
| & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| } |
| |
| static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc, |
| enum transcoder transcoder, |
| struct intel_link_m_n *m_n, |
| struct intel_link_m_n *m2_n2) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (DISPLAY_VER(dev_priv) >= 5) { |
| m_n->link_m = intel_de_read(dev_priv, |
| PIPE_LINK_M1(transcoder)); |
| m_n->link_n = intel_de_read(dev_priv, |
| PIPE_LINK_N1(transcoder)); |
| m_n->gmch_m = intel_de_read(dev_priv, |
| PIPE_DATA_M1(transcoder)) |
| & ~TU_SIZE_MASK; |
| m_n->gmch_n = intel_de_read(dev_priv, |
| PIPE_DATA_N1(transcoder)); |
| m_n->tu = ((intel_de_read(dev_priv, PIPE_DATA_M1(transcoder)) |
| & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| |
| if (m2_n2 && transcoder_has_m2_n2(dev_priv, transcoder)) { |
| m2_n2->link_m = intel_de_read(dev_priv, |
| PIPE_LINK_M2(transcoder)); |
| m2_n2->link_n = intel_de_read(dev_priv, |
| PIPE_LINK_N2(transcoder)); |
| m2_n2->gmch_m = intel_de_read(dev_priv, |
| PIPE_DATA_M2(transcoder)) |
| & ~TU_SIZE_MASK; |
| m2_n2->gmch_n = intel_de_read(dev_priv, |
| PIPE_DATA_N2(transcoder)); |
| m2_n2->tu = ((intel_de_read(dev_priv, PIPE_DATA_M2(transcoder)) |
| & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| } |
| } else { |
| m_n->link_m = intel_de_read(dev_priv, PIPE_LINK_M_G4X(pipe)); |
| m_n->link_n = intel_de_read(dev_priv, PIPE_LINK_N_G4X(pipe)); |
| m_n->gmch_m = intel_de_read(dev_priv, PIPE_DATA_M_G4X(pipe)) |
| & ~TU_SIZE_MASK; |
| m_n->gmch_n = intel_de_read(dev_priv, PIPE_DATA_N_G4X(pipe)); |
| m_n->tu = ((intel_de_read(dev_priv, PIPE_DATA_M_G4X(pipe)) |
| & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| } |
| } |
| |
| void intel_dp_get_m_n(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| if (pipe_config->has_pch_encoder) |
| intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n); |
| else |
| intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder, |
| &pipe_config->dp_m_n, |
| &pipe_config->dp_m2_n2); |
| } |
| |
| static void ilk_get_fdi_m_n_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder, |
| &pipe_config->fdi_m_n, NULL); |
| } |
| |
| static void ilk_get_pfit_pos_size(struct intel_crtc_state *crtc_state, |
| u32 pos, u32 size) |
| { |
| drm_rect_init(&crtc_state->pch_pfit.dst, |
| pos >> 16, pos & 0xffff, |
| size >> 16, size & 0xffff); |
| } |
| |
| static void skl_get_pfit_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; |
| int id = -1; |
| int i; |
| |
| /* find scaler attached to this pipe */ |
| for (i = 0; i < crtc->num_scalers; i++) { |
| u32 ctl, pos, size; |
| |
| ctl = intel_de_read(dev_priv, SKL_PS_CTRL(crtc->pipe, i)); |
| if ((ctl & (PS_SCALER_EN | PS_PLANE_SEL_MASK)) != PS_SCALER_EN) |
| continue; |
| |
| id = i; |
| crtc_state->pch_pfit.enabled = true; |
| |
| pos = intel_de_read(dev_priv, SKL_PS_WIN_POS(crtc->pipe, i)); |
| size = intel_de_read(dev_priv, SKL_PS_WIN_SZ(crtc->pipe, i)); |
| |
| ilk_get_pfit_pos_size(crtc_state, pos, size); |
| |
| scaler_state->scalers[i].in_use = true; |
| break; |
| } |
| |
| scaler_state->scaler_id = id; |
| if (id >= 0) |
| scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX); |
| else |
| scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX); |
| } |
| |
| static void ilk_get_pfit_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 ctl, pos, size; |
| |
| ctl = intel_de_read(dev_priv, PF_CTL(crtc->pipe)); |
| if ((ctl & PF_ENABLE) == 0) |
| return; |
| |
| crtc_state->pch_pfit.enabled = true; |
| |
| pos = intel_de_read(dev_priv, PF_WIN_POS(crtc->pipe)); |
| size = intel_de_read(dev_priv, PF_WIN_SZ(crtc->pipe)); |
| |
| ilk_get_pfit_pos_size(crtc_state, pos, size); |
| |
| /* |
| * We currently do not free assignements of panel fitters on |
| * ivb/hsw (since we don't use the higher upscaling modes which |
| * differentiates them) so just WARN about this case for now. |
| */ |
| drm_WARN_ON(&dev_priv->drm, DISPLAY_VER(dev_priv) == 7 && |
| (ctl & PF_PIPE_SEL_MASK_IVB) != PF_PIPE_SEL_IVB(crtc->pipe)); |
| } |
| |
| static bool ilk_get_pipe_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| u32 tmp; |
| bool ret; |
| |
| power_domain = POWER_DOMAIN_PIPE(crtc->pipe); |
| wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); |
| if (!wakeref) |
| return false; |
| |
| pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| pipe_config->shared_dpll = NULL; |
| |
| ret = false; |
| tmp = intel_de_read(dev_priv, PIPECONF(crtc->pipe)); |
| if (!(tmp & PIPECONF_ENABLE)) |
| goto out; |
| |
| switch (tmp & PIPECONF_BPC_MASK) { |
| case PIPECONF_6BPC: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case PIPECONF_8BPC: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case PIPECONF_10BPC: |
| pipe_config->pipe_bpp = 30; |
| break; |
| case PIPECONF_12BPC: |
| pipe_config->pipe_bpp = 36; |
| break; |
| default: |
| break; |
| } |
| |
| if (tmp & PIPECONF_COLOR_RANGE_SELECT) |
| pipe_config->limited_color_range = true; |
| |
| switch (tmp & PIPECONF_OUTPUT_COLORSPACE_MASK) { |
| case PIPECONF_OUTPUT_COLORSPACE_YUV601: |
| case PIPECONF_OUTPUT_COLORSPACE_YUV709: |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444; |
| break; |
| default: |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| break; |
| } |
| |
| pipe_config->gamma_mode = (tmp & PIPECONF_GAMMA_MODE_MASK_ILK) >> |
| PIPECONF_GAMMA_MODE_SHIFT; |
| |
| pipe_config->csc_mode = intel_de_read(dev_priv, |
| PIPE_CSC_MODE(crtc->pipe)); |
| |
| i9xx_get_pipe_color_config(pipe_config); |
| intel_color_get_config(pipe_config); |
| |
| if (intel_de_read(dev_priv, PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) { |
| struct intel_shared_dpll *pll; |
| enum intel_dpll_id pll_id; |
| bool pll_active; |
| |
| pipe_config->has_pch_encoder = true; |
| |
| tmp = intel_de_read(dev_priv, FDI_RX_CTL(crtc->pipe)); |
| pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >> |
| FDI_DP_PORT_WIDTH_SHIFT) + 1; |
| |
| ilk_get_fdi_m_n_config(crtc, pipe_config); |
| |
| if (HAS_PCH_IBX(dev_priv)) { |
| /* |
| * The pipe->pch transcoder and pch transcoder->pll |
| * mapping is fixed. |
| */ |
| pll_id = (enum intel_dpll_id) crtc->pipe; |
| } else { |
| tmp = intel_de_read(dev_priv, PCH_DPLL_SEL); |
| if (tmp & TRANS_DPLLB_SEL(crtc->pipe)) |
| pll_id = DPLL_ID_PCH_PLL_B; |
| else |
| pll_id= DPLL_ID_PCH_PLL_A; |
| } |
| |
| pipe_config->shared_dpll = |
| intel_get_shared_dpll_by_id(dev_priv, pll_id); |
| pll = pipe_config->shared_dpll; |
| |
| pll_active = intel_dpll_get_hw_state(dev_priv, pll, |
| &pipe_config->dpll_hw_state); |
| drm_WARN_ON(dev, !pll_active); |
| |
| tmp = pipe_config->dpll_hw_state.dpll; |
| pipe_config->pixel_multiplier = |
| ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK) |
| >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1; |
| |
| ilk_pch_clock_get(crtc, pipe_config); |
| } else { |
| pipe_config->pixel_multiplier = 1; |
| } |
| |
| intel_get_transcoder_timings(crtc, pipe_config); |
| intel_get_pipe_src_size(crtc, pipe_config); |
| |
| ilk_get_pfit_config(pipe_config); |
| |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, power_domain, wakeref); |
| |
| return ret; |
| } |
| |
| static bool transcoder_ddi_func_is_enabled(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| u32 tmp = 0; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| |
| with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) |
| tmp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| return tmp & TRANS_DDI_FUNC_ENABLE; |
| } |
| |
| static u8 hsw_panel_transcoders(struct drm_i915_private *i915) |
| { |
| u8 panel_transcoder_mask = BIT(TRANSCODER_EDP); |
| |
| if (DISPLAY_VER(i915) >= 11) |
| panel_transcoder_mask |= BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1); |
| |
| return panel_transcoder_mask; |
| } |
| |
| static u8 hsw_enabled_transcoders(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u8 panel_transcoder_mask = hsw_panel_transcoders(dev_priv); |
| enum transcoder cpu_transcoder; |
| u8 enabled_transcoders = 0; |
| |
| /* |
| * XXX: Do intel_display_power_get_if_enabled before reading this (for |
| * consistency and less surprising code; it's in always on power). |
| */ |
| for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, |
| panel_transcoder_mask) { |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| enum pipe trans_pipe; |
| u32 tmp = 0; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) |
| tmp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| if (!(tmp & TRANS_DDI_FUNC_ENABLE)) |
| continue; |
| |
| switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { |
| default: |
| drm_WARN(dev, 1, |
| "unknown pipe linked to transcoder %s\n", |
| transcoder_name(cpu_transcoder)); |
| fallthrough; |
| case TRANS_DDI_EDP_INPUT_A_ONOFF: |
| case TRANS_DDI_EDP_INPUT_A_ON: |
| trans_pipe = PIPE_A; |
| break; |
| case TRANS_DDI_EDP_INPUT_B_ONOFF: |
| trans_pipe = PIPE_B; |
| break; |
| case TRANS_DDI_EDP_INPUT_C_ONOFF: |
| trans_pipe = PIPE_C; |
| break; |
| case TRANS_DDI_EDP_INPUT_D_ONOFF: |
| trans_pipe = PIPE_D; |
| break; |
| } |
| |
| if (trans_pipe == crtc->pipe) |
| enabled_transcoders |= BIT(cpu_transcoder); |
| } |
| |
| cpu_transcoder = (enum transcoder) crtc->pipe; |
| if (transcoder_ddi_func_is_enabled(dev_priv, cpu_transcoder)) |
| enabled_transcoders |= BIT(cpu_transcoder); |
| |
| return enabled_transcoders; |
| } |
| |
| static bool has_edp_transcoders(u8 enabled_transcoders) |
| { |
| return enabled_transcoders & BIT(TRANSCODER_EDP); |
| } |
| |
| static bool has_dsi_transcoders(u8 enabled_transcoders) |
| { |
| return enabled_transcoders & (BIT(TRANSCODER_DSI_0) | |
| BIT(TRANSCODER_DSI_1)); |
| } |
| |
| static bool has_pipe_transcoders(u8 enabled_transcoders) |
| { |
| return enabled_transcoders & ~(BIT(TRANSCODER_EDP) | |
| BIT(TRANSCODER_DSI_0) | |
| BIT(TRANSCODER_DSI_1)); |
| } |
| |
| static void assert_enabled_transcoders(struct drm_i915_private *i915, |
| u8 enabled_transcoders) |
| { |
| /* Only one type of transcoder please */ |
| drm_WARN_ON(&i915->drm, |
| has_edp_transcoders(enabled_transcoders) + |
| has_dsi_transcoders(enabled_transcoders) + |
| has_pipe_transcoders(enabled_transcoders) > 1); |
| |
| /* Only DSI transcoders can be ganged */ |
| drm_WARN_ON(&i915->drm, |
| !has_dsi_transcoders(enabled_transcoders) && |
| !is_power_of_2(enabled_transcoders)); |
| } |
| |
| static bool hsw_get_transcoder_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config, |
| struct intel_display_power_domain_set *power_domain_set) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long enabled_transcoders; |
| u32 tmp; |
| |
| enabled_transcoders = hsw_enabled_transcoders(crtc); |
| if (!enabled_transcoders) |
| return false; |
| |
| assert_enabled_transcoders(dev_priv, enabled_transcoders); |
| |
| /* |
| * With the exception of DSI we should only ever have |
| * a single enabled transcoder. With DSI let's just |
| * pick the first one. |
| */ |
| pipe_config->cpu_transcoder = ffs(enabled_transcoders) - 1; |
| |
| if (!intel_display_power_get_in_set_if_enabled(dev_priv, power_domain_set, |
| POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder))) |
| return false; |
| |
| if (hsw_panel_transcoders(dev_priv) & BIT(pipe_config->cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder)); |
| |
| if ((tmp & TRANS_DDI_EDP_INPUT_MASK) == TRANS_DDI_EDP_INPUT_A_ONOFF) |
| pipe_config->pch_pfit.force_thru = true; |
| } |
| |
| tmp = intel_de_read(dev_priv, PIPECONF(pipe_config->cpu_transcoder)); |
| |
| return tmp & PIPECONF_ENABLE; |
| } |
| |
| static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config, |
| struct intel_display_power_domain_set *power_domain_set) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum transcoder cpu_transcoder; |
| enum port port; |
| u32 tmp; |
| |
| for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) { |
| if (port == PORT_A) |
| cpu_transcoder = TRANSCODER_DSI_A; |
| else |
| cpu_transcoder = TRANSCODER_DSI_C; |
| |
| if (!intel_display_power_get_in_set_if_enabled(dev_priv, power_domain_set, |
| POWER_DOMAIN_TRANSCODER(cpu_transcoder))) |
| continue; |
| |
| /* |
| * The PLL needs to be enabled with a valid divider |
| * configuration, otherwise accessing DSI registers will hang |
| * the machine. See BSpec North Display Engine |
| * registers/MIPI[BXT]. We can break out here early, since we |
| * need the same DSI PLL to be enabled for both DSI ports. |
| */ |
| if (!bxt_dsi_pll_is_enabled(dev_priv)) |
| break; |
| |
| /* XXX: this works for video mode only */ |
| tmp = intel_de_read(dev_priv, BXT_MIPI_PORT_CTRL(port)); |
| if (!(tmp & DPI_ENABLE)) |
| continue; |
| |
| tmp = intel_de_read(dev_priv, MIPI_CTRL(port)); |
| if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe)) |
| continue; |
| |
| pipe_config->cpu_transcoder = cpu_transcoder; |
| break; |
| } |
| |
| return transcoder_is_dsi(pipe_config->cpu_transcoder); |
| } |
| |
| static void hsw_get_ddi_port_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| enum port port; |
| u32 tmp; |
| |
| if (transcoder_is_dsi(cpu_transcoder)) { |
| port = (cpu_transcoder == TRANSCODER_DSI_A) ? |
| PORT_A : PORT_B; |
| } else { |
| tmp = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (!(tmp & TRANS_DDI_FUNC_ENABLE)) |
| return; |
| if (DISPLAY_VER(dev_priv) >= 12) |
| port = TGL_TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp); |
| else |
| port = TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp); |
| } |
| |
| /* |
| * Haswell has only FDI/PCH transcoder A. It is which is connected to |
| * DDI E. So just check whether this pipe is wired to DDI E and whether |
| * the PCH transcoder is on. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9 && |
| (port == PORT_E) && intel_de_read(dev_priv, LPT_TRANSCONF) & TRANS_ENABLE) { |
| pipe_config->has_pch_encoder = true; |
| |
| tmp = intel_de_read(dev_priv, FDI_RX_CTL(PIPE_A)); |
| pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >> |
| FDI_DP_PORT_WIDTH_SHIFT) + 1; |
| |
| ilk_get_fdi_m_n_config(crtc, pipe_config); |
| } |
| } |
| |
| static bool hsw_get_pipe_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_display_power_domain_set power_domain_set = { }; |
| bool active; |
| u32 tmp; |
| |
| if (!intel_display_power_get_in_set_if_enabled(dev_priv, &power_domain_set, |
| POWER_DOMAIN_PIPE(crtc->pipe))) |
| return false; |
| |
| pipe_config->shared_dpll = NULL; |
| |
| active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_set); |
| |
| if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) && |
| bxt_get_dsi_transcoder_state(crtc, pipe_config, &power_domain_set)) { |
| drm_WARN_ON(&dev_priv->drm, active); |
| active = true; |
| } |
| |
| intel_dsc_get_config(pipe_config); |
| if (DISPLAY_VER(dev_priv) >= 13 && !pipe_config->dsc.compression_enable) |
| intel_uncompressed_joiner_get_config(pipe_config); |
| |
| if (!active) { |
| /* bigjoiner slave doesn't enable transcoder */ |
| if (!pipe_config->bigjoiner_slave) |
| goto out; |
| |
| active = true; |
| pipe_config->pixel_multiplier = 1; |
| |
| /* we cannot read out most state, so don't bother.. */ |
| pipe_config->quirks |= PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE; |
| } else if (!transcoder_is_dsi(pipe_config->cpu_transcoder) || |
| DISPLAY_VER(dev_priv) >= 11) { |
| hsw_get_ddi_port_state(crtc, pipe_config); |
| intel_get_transcoder_timings(crtc, pipe_config); |
| } |
| |
| if (HAS_VRR(dev_priv) && !transcoder_is_dsi(pipe_config->cpu_transcoder)) |
| intel_vrr_get_config(crtc, pipe_config); |
| |
| intel_get_pipe_src_size(crtc, pipe_config); |
| |
| if (IS_HASWELL(dev_priv)) { |
| u32 tmp = intel_de_read(dev_priv, |
| PIPECONF(pipe_config->cpu_transcoder)); |
| |
| if (tmp & PIPECONF_OUTPUT_COLORSPACE_YUV_HSW) |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444; |
| else |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| } else { |
| pipe_config->output_format = |
| bdw_get_pipemisc_output_format(crtc); |
| } |
| |
| pipe_config->gamma_mode = intel_de_read(dev_priv, |
| GAMMA_MODE(crtc->pipe)); |
| |
| pipe_config->csc_mode = intel_de_read(dev_priv, |
| PIPE_CSC_MODE(crtc->pipe)); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| tmp = intel_de_read(dev_priv, SKL_BOTTOM_COLOR(crtc->pipe)); |
| |
| if (tmp & SKL_BOTTOM_COLOR_GAMMA_ENABLE) |
| pipe_config->gamma_enable = true; |
| |
| if (tmp & SKL_BOTTOM_COLOR_CSC_ENABLE) |
| pipe_config->csc_enable = true; |
| } else { |
| i9xx_get_pipe_color_config(pipe_config); |
| } |
| |
| intel_color_get_config(pipe_config); |
| |
| tmp = intel_de_read(dev_priv, WM_LINETIME(crtc->pipe)); |
| pipe_config->linetime = REG_FIELD_GET(HSW_LINETIME_MASK, tmp); |
| if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) |
| pipe_config->ips_linetime = |
| REG_FIELD_GET(HSW_IPS_LINETIME_MASK, tmp); |
| |
| if (intel_display_power_get_in_set_if_enabled(dev_priv, &power_domain_set, |
| POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe))) { |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_get_pfit_config(pipe_config); |
| else |
| ilk_get_pfit_config(pipe_config); |
| } |
| |
| if (hsw_crtc_supports_ips(crtc)) { |
| if (IS_HASWELL(dev_priv)) |
| pipe_config->ips_enabled = intel_de_read(dev_priv, |
| IPS_CTL) & IPS_ENABLE; |
| else { |
| /* |
| * We cannot readout IPS state on broadwell, set to |
| * true so we can set it to a defined state on first |
| * commit. |
| */ |
| pipe_config->ips_enabled = true; |
| } |
| } |
| |
| if (pipe_config->bigjoiner_slave) { |
| /* Cannot be read out as a slave, set to 0. */ |
| pipe_config->pixel_multiplier = 0; |
| } else if (pipe_config->cpu_transcoder != TRANSCODER_EDP && |
| !transcoder_is_dsi(pipe_config->cpu_transcoder)) { |
| pipe_config->pixel_multiplier = |
| intel_de_read(dev_priv, |
| PIPE_MULT(pipe_config->cpu_transcoder)) + 1; |
| } else { |
| pipe_config->pixel_multiplier = 1; |
| } |
| |
| out: |
| intel_display_power_put_all_in_set(dev_priv, &power_domain_set); |
| |
| return active; |
| } |
| |
| static bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| if (!i915->display->get_pipe_config(crtc, crtc_state)) |
| return false; |
| |
| crtc_state->hw.active = true; |
| |
| intel_crtc_readout_derived_state(crtc_state); |
| |
| return true; |
| } |
| |
| /* VESA 640x480x72Hz mode to set on the pipe */ |
| static const struct drm_display_mode load_detect_mode = { |
| DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, |
| 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| }; |
| |
| static int intel_modeset_disable_planes(struct drm_atomic_state *state, |
| struct drm_crtc *crtc) |
| { |
| struct drm_plane *plane; |
| struct drm_plane_state *plane_state; |
| int ret, i; |
| |
| ret = drm_atomic_add_affected_planes(state, crtc); |
| if (ret) |
| return ret; |
| |
| for_each_new_plane_in_state(state, plane, plane_state, i) { |
| if (plane_state->crtc != crtc) |
| continue; |
| |
| ret = drm_atomic_set_crtc_for_plane(plane_state, NULL); |
| if (ret) |
| return ret; |
| |
| drm_atomic_set_fb_for_plane(plane_state, NULL); |
| } |
| |
| return 0; |
| } |
| |
| int intel_get_load_detect_pipe(struct drm_connector *connector, |
| struct intel_load_detect_pipe *old, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct intel_encoder *encoder = |
| intel_attached_encoder(to_intel_connector(connector)); |
| struct intel_crtc *possible_crtc; |
| struct intel_crtc *crtc = NULL; |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct drm_mode_config *config = &dev->mode_config; |
| struct drm_atomic_state *state = NULL, *restore_state = NULL; |
| struct drm_connector_state *connector_state; |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", |
| connector->base.id, connector->name, |
| encoder->base.base.id, encoder->base.name); |
| |
| old->restore_state = NULL; |
| |
| drm_WARN_ON(dev, !drm_modeset_is_locked(&config->connection_mutex)); |
| |
| /* |
| * Algorithm gets a little messy: |
| * |
| * - if the connector already has an assigned crtc, use it (but make |
| * sure it's on first) |
| * |
| * - try to find the first unused crtc that can drive this connector, |
| * and use that if we find one |
| */ |
| |
| /* See if we already have a CRTC for this connector */ |
| if (connector->state->crtc) { |
| crtc = to_intel_crtc(connector->state->crtc); |
| |
| ret = drm_modeset_lock(&crtc->base.mutex, ctx); |
| if (ret) |
| goto fail; |
| |
| /* Make sure the crtc and connector are running */ |
| goto found; |
| } |
| |
| /* Find an unused one (if possible) */ |
| for_each_intel_crtc(dev, possible_crtc) { |
| if (!(encoder->base.possible_crtcs & |
| drm_crtc_mask(&possible_crtc->base))) |
| continue; |
| |
| ret = drm_modeset_lock(&possible_crtc->base.mutex, ctx); |
| if (ret) |
| goto fail; |
| |
| if (possible_crtc->base.state->enable) { |
| drm_modeset_unlock(&possible_crtc->base.mutex); |
| continue; |
| } |
| |
| crtc = possible_crtc; |
| break; |
| } |
| |
| /* |
| * If we didn't find an unused CRTC, don't use any. |
| */ |
| if (!crtc) { |
| drm_dbg_kms(&dev_priv->drm, |
| "no pipe available for load-detect\n"); |
| ret = -ENODEV; |
| goto fail; |
| } |
| |
| found: |
| state = drm_atomic_state_alloc(dev); |
| restore_state = drm_atomic_state_alloc(dev); |
| if (!state || !restore_state) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| state->acquire_ctx = ctx; |
| restore_state->acquire_ctx = ctx; |
| |
| connector_state = drm_atomic_get_connector_state(state, connector); |
| if (IS_ERR(connector_state)) { |
| ret = PTR_ERR(connector_state); |
| goto fail; |
| } |
| |
| ret = drm_atomic_set_crtc_for_connector(connector_state, &crtc->base); |
| if (ret) |
| goto fail; |
| |
| crtc_state = intel_atomic_get_crtc_state(state, crtc); |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| goto fail; |
| } |
| |
| crtc_state->uapi.active = true; |
| |
| ret = drm_atomic_set_mode_for_crtc(&crtc_state->uapi, |
| &load_detect_mode); |
| if (ret) |
| goto fail; |
| |
| ret = intel_modeset_disable_planes(state, &crtc->base); |
| if (ret) |
| goto fail; |
| |
| ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector)); |
| if (!ret) |
| ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, &crtc->base)); |
| if (!ret) |
| ret = drm_atomic_add_affected_planes(restore_state, &crtc->base); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Failed to create a copy of old state to restore: %i\n", |
| ret); |
| goto fail; |
| } |
| |
| ret = drm_atomic_commit(state); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "failed to set mode on load-detect pipe\n"); |
| goto fail; |
| } |
| |
| old->restore_state = restore_state; |
| drm_atomic_state_put(state); |
| |
| /* let the connector get through one full cycle before testing */ |
| intel_wait_for_vblank(dev_priv, crtc->pipe); |
| return true; |
| |
| fail: |
| if (state) { |
| drm_atomic_state_put(state); |
| state = NULL; |
| } |
| if (restore_state) { |
| drm_atomic_state_put(restore_state); |
| restore_state = NULL; |
| } |
| |
| if (ret == -EDEADLK) |
| return ret; |
| |
| return false; |
| } |
| |
| void intel_release_load_detect_pipe(struct drm_connector *connector, |
| struct intel_load_detect_pipe *old, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct intel_encoder *intel_encoder = |
| intel_attached_encoder(to_intel_connector(connector)); |
| struct drm_i915_private *i915 = to_i915(intel_encoder->base.dev); |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_atomic_state *state = old->restore_state; |
| int ret; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", |
| connector->base.id, connector->name, |
| encoder->base.id, encoder->name); |
| |
| if (!state) |
| return; |
| |
| ret = drm_atomic_helper_commit_duplicated_state(state, ctx); |
| if (ret) |
| drm_dbg_kms(&i915->drm, |
| "Couldn't release load detect pipe: %i\n", ret); |
| drm_atomic_state_put(state); |
| } |
| |
| static int i9xx_pll_refclk(struct drm_device *dev, |
| const struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 dpll = pipe_config->dpll_hw_state.dpll; |
| |
| if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) |
| return dev_priv->vbt.lvds_ssc_freq; |
| else if (HAS_PCH_SPLIT(dev_priv)) |
| return 120000; |
| else if (DISPLAY_VER(dev_priv) != 2) |
| return 96000; |
| else |
| return 48000; |
| } |
| |
| /* Returns the clock of the currently programmed mode of the given pipe. */ |
| static void i9xx_crtc_clock_get(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 dpll = pipe_config->dpll_hw_state.dpll; |
| u32 fp; |
| struct dpll clock; |
| int port_clock; |
| int refclk = i9xx_pll_refclk(dev, pipe_config); |
| |
| if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) |
| fp = pipe_config->dpll_hw_state.fp0; |
| else |
| fp = pipe_config->dpll_hw_state.fp1; |
| |
| clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; |
| if (IS_PINEVIEW(dev_priv)) { |
| clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; |
| clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; |
| } else { |
| clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; |
| clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; |
| } |
| |
| if (DISPLAY_VER(dev_priv) != 2) { |
| if (IS_PINEVIEW(dev_priv)) |
| clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> |
| DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); |
| else |
| clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> |
| DPLL_FPA01_P1_POST_DIV_SHIFT); |
| |
| switch (dpll & DPLL_MODE_MASK) { |
| case DPLLB_MODE_DAC_SERIAL: |
| clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? |
| 5 : 10; |
| break; |
| case DPLLB_MODE_LVDS: |
| clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? |
| 7 : 14; |
| break; |
| default: |
| drm_dbg_kms(&dev_priv->drm, |
| "Unknown DPLL mode %08x in programmed " |
| "mode\n", (int)(dpll & DPLL_MODE_MASK)); |
| return; |
| } |
| |
| if (IS_PINEVIEW(dev_priv)) |
| port_clock = pnv_calc_dpll_params(refclk, &clock); |
| else |
| port_clock = i9xx_calc_dpll_params(refclk, &clock); |
| } else { |
| enum pipe lvds_pipe; |
| |
| if (IS_I85X(dev_priv) && |
| intel_lvds_port_enabled(dev_priv, LVDS, &lvds_pipe) && |
| lvds_pipe == crtc->pipe) { |
| u32 lvds = intel_de_read(dev_priv, LVDS); |
| |
| clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> |
| DPLL_FPA01_P1_POST_DIV_SHIFT); |
| |
| if (lvds & LVDS_CLKB_POWER_UP) |
| clock.p2 = 7; |
| else |
| clock.p2 = 14; |
| } else { |
| if (dpll & PLL_P1_DIVIDE_BY_TWO) |
| clock.p1 = 2; |
| else { |
| clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> |
| DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; |
| } |
| if (dpll & PLL_P2_DIVIDE_BY_4) |
| clock.p2 = 4; |
| else |
| clock.p2 = 2; |
| } |
| |
| port_clock = i9xx_calc_dpll_params(refclk, &clock); |
| } |
| |
| /* |
| * This value includes pixel_multiplier. We will use |
| * port_clock to compute adjusted_mode.crtc_clock in the |
| * encoder's get_config() function. |
| */ |
| pipe_config->port_clock = port_clock; |
| } |
| |
| int intel_dotclock_calculate(int link_freq, |
| const struct intel_link_m_n *m_n) |
| { |
| /* |
| * The calculation for the data clock is: |
| * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp |
| * But we want to avoid losing precison if possible, so: |
| * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp)) |
| * |
| * and the link clock is simpler: |
| * link_clock = (m * link_clock) / n |
| */ |
| |
| if (!m_n->link_n) |
| return 0; |
| |
| return div_u64(mul_u32_u32(m_n->link_m, link_freq), m_n->link_n); |
| } |
| |
| static void ilk_pch_clock_get(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| /* read out port_clock from the DPLL */ |
| i9xx_crtc_clock_get(crtc, pipe_config); |
| |
| /* |
| * In case there is an active pipe without active ports, |
| * we may need some idea for the dotclock anyway. |
| * Calculate one based on the FDI configuration. |
| */ |
| pipe_config->hw.adjusted_mode.crtc_clock = |
| intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config), |
| &pipe_config->fdi_m_n); |
| } |
| |
| /* Returns the currently programmed mode of the given encoder. */ |
| struct drm_display_mode * |
| intel_encoder_current_mode(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_crtc_state *crtc_state; |
| struct drm_display_mode *mode; |
| struct intel_crtc *crtc; |
| enum pipe pipe; |
| |
| if (!encoder->get_hw_state(encoder, &pipe)) |
| return NULL; |
| |
| crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| |
| mode = kzalloc(sizeof(*mode), GFP_KERNEL); |
| if (!mode) |
| return NULL; |
| |
| crtc_state = intel_crtc_state_alloc(crtc); |
| if (!crtc_state) { |
| kfree(mode); |
| return NULL; |
| } |
| |
| if (!intel_crtc_get_pipe_config(crtc_state)) { |
| kfree(crtc_state); |
| kfree(mode); |
| return NULL; |
| } |
| |
| intel_encoder_get_config(encoder, crtc_state); |
| |
| intel_mode_from_crtc_timings(mode, &crtc_state->hw.adjusted_mode); |
| |
| kfree(crtc_state); |
| |
| return mode; |
| } |
| |
| /** |
| * intel_wm_need_update - Check whether watermarks need updating |
| * @cur: current plane state |
| * @new: new plane state |
| * |
| * Check current plane state versus the new one to determine whether |
| * watermarks need to be recalculated. |
| * |
| * Returns true or false. |
| */ |
| static bool intel_wm_need_update(const struct intel_plane_state *cur, |
| struct intel_plane_state *new) |
| { |
| /* Update watermarks on tiling or size changes. */ |
| if (new->uapi.visible != cur->uapi.visible) |
| return true; |
| |
| if (!cur->hw.fb || !new->hw.fb) |
| return false; |
| |
| if (cur->hw.fb->modifier != new->hw.fb->modifier || |
| cur->hw.rotation != new->hw.rotation || |
| drm_rect_width(&new->uapi.src) != drm_rect_width(&cur->uapi.src) || |
| drm_rect_height(&new->uapi.src) != drm_rect_height(&cur->uapi.src) || |
| drm_rect_width(&new->uapi.dst) != drm_rect_width(&cur->uapi.dst) || |
| drm_rect_height(&new->uapi.dst) != drm_rect_height(&cur->uapi.dst)) |
| return true; |
| |
| return false; |
| } |
| |
| static bool needs_scaling(const struct intel_plane_state *state) |
| { |
| int src_w = drm_rect_width(&state->uapi.src) >> 16; |
| int src_h = drm_rect_height(&state->uapi.src) >> 16; |
| int dst_w = drm_rect_width(&state->uapi.dst); |
| int dst_h = drm_rect_height(&state->uapi.dst); |
| |
| return (src_w != dst_w || src_h != dst_h); |
| } |
| |
| int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state, |
| const struct intel_plane_state *old_plane_state, |
| struct intel_plane_state *new_plane_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct intel_plane *plane = to_intel_plane(new_plane_state->uapi.plane); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| bool mode_changed = intel_crtc_needs_modeset(new_crtc_state); |
| bool was_crtc_enabled = old_crtc_state->hw.active; |
| bool is_crtc_enabled = new_crtc_state->hw.active; |
| bool turn_off, turn_on, visible, was_visible; |
| int ret; |
| |
| if (DISPLAY_VER(dev_priv) >= 9 && plane->id != PLANE_CURSOR) { |
| ret = skl_update_scaler_plane(new_crtc_state, new_plane_state); |
| if (ret) |
| return ret; |
| } |
| |
| was_visible = old_plane_state->uapi.visible; |
| visible = new_plane_state->uapi.visible; |
| |
| if (!was_crtc_enabled && drm_WARN_ON(&dev_priv->drm, was_visible)) |
| was_visible = false; |
| |
| /* |
| * Visibility is calculated as if the crtc was on, but |
| * after scaler setup everything depends on it being off |
| * when the crtc isn't active. |
| * |
| * FIXME this is wrong for watermarks. Watermarks should also |
| * be computed as if the pipe would be active. Perhaps move |
| * per-plane wm computation to the .check_plane() hook, and |
| * only combine the results from all planes in the current place? |
| */ |
| if (!is_crtc_enabled) { |
| intel_plane_set_invisible(new_crtc_state, new_plane_state); |
| visible = false; |
| } |
| |
| if (!was_visible && !visible) |
| return 0; |
| |
| turn_off = was_visible && (!visible || mode_changed); |
| turn_on = visible && (!was_visible || mode_changed); |
| |
| drm_dbg_atomic(&dev_priv->drm, |
| "[CRTC:%d:%s] with [PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n", |
| crtc->base.base.id, crtc->base.name, |
| plane->base.base.id, plane->base.name, |
| was_visible, visible, |
| turn_off, turn_on, mode_changed); |
| |
| if (turn_on) { |
| if (DISPLAY_VER(dev_priv) < 5 && !IS_G4X(dev_priv)) |
| new_crtc_state->update_wm_pre = true; |
| |
| /* must disable cxsr around plane enable/disable */ |
| if (plane->id != PLANE_CURSOR) |
| new_crtc_state->disable_cxsr = true; |
| } else if (turn_off) { |
| if (DISPLAY_VER(dev_priv) < 5 && !IS_G4X(dev_priv)) |
| new_crtc_state->update_wm_post = true; |
| |
| /* must disable cxsr around plane enable/disable */ |
| if (plane->id != PLANE_CURSOR) |
| new_crtc_state->disable_cxsr = true; |
| } else if (intel_wm_need_update(old_plane_state, new_plane_state)) { |
| if (DISPLAY_VER(dev_priv) < 5 && !IS_G4X(dev_priv)) { |
| /* FIXME bollocks */ |
| new_crtc_state->update_wm_pre = true; |
| new_crtc_state->update_wm_post = true; |
| } |
| } |
| |
| if (visible || was_visible) |
| new_crtc_state->fb_bits |= plane->frontbuffer_bit; |
| |
| /* |
| * ILK/SNB DVSACNTR/Sprite Enable |
| * IVB SPR_CTL/Sprite Enable |
| * "When in Self Refresh Big FIFO mode, a write to enable the |
| * plane will be internally buffered and delayed while Big FIFO |
| * mode is exiting." |
| * |
| * Which means that enabling the sprite can take an extra frame |
| * when we start in big FIFO mode (LP1+). Thus we need to drop |
| * down to LP0 and wait for vblank in order to make sure the |
| * sprite gets enabled on the next vblank after the register write. |
| * Doing otherwise would risk enabling the sprite one frame after |
| * we've already signalled flip completion. We can resume LP1+ |
| * once the sprite has been enabled. |
| * |
| * |
| * WaCxSRDisabledForSpriteScaling:ivb |
| * IVB SPR_SCALE/Scaling Enable |
| * "Low Power watermarks must be disabled for at least one |
| * frame before enabling sprite scaling, and kept disabled |
| * until sprite scaling is disabled." |
| * |
| * ILK/SNB DVSASCALE/Scaling Enable |
| * "When in Self Refresh Big FIFO mode, scaling enable will be |
| * masked off while Big FIFO mode is exiting." |
| * |
| * Despite the w/a only being listed for IVB we assume that |
| * the ILK/SNB note has similar ramifications, hence we apply |
| * the w/a on all three platforms. |
| * |
| * With experimental results seems this is needed also for primary |
| * plane, not only sprite plane. |
| */ |
| if (plane->id != PLANE_CURSOR && |
| (IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv) || |
| IS_IVYBRIDGE(dev_priv)) && |
| (turn_on || (!needs_scaling(old_plane_state) && |
| needs_scaling(new_plane_state)))) |
| new_crtc_state->disable_lp_wm = true; |
| |
| return 0; |
| } |
| |
| static bool encoders_cloneable(const struct intel_encoder *a, |
| const struct intel_encoder *b) |
| { |
| /* masks could be asymmetric, so check both ways */ |
| return a == b || (a->cloneable & (1 << b->type) && |
| b->cloneable & (1 << a->type)); |
| } |
| |
| static bool check_single_encoder_cloning(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| struct intel_encoder *encoder) |
| { |
| struct intel_encoder *source_encoder; |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| source_encoder = |
| to_intel_encoder(connector_state->best_encoder); |
| if (!encoders_cloneable(encoder, source_encoder)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int icl_add_linked_planes(struct intel_atomic_state *state) |
| { |
| struct intel_plane *plane, *linked; |
| struct intel_plane_state *plane_state, *linked_plane_state; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| linked = plane_state->planar_linked_plane; |
| |
| if (!linked) |
| continue; |
| |
| linked_plane_state = intel_atomic_get_plane_state(state, linked); |
| if (IS_ERR(linked_plane_state)) |
| return PTR_ERR(linked_plane_state); |
| |
| drm_WARN_ON(state->base.dev, |
| linked_plane_state->planar_linked_plane != plane); |
| drm_WARN_ON(state->base.dev, |
| linked_plane_state->planar_slave == plane_state->planar_slave); |
| } |
| |
| return 0; |
| } |
| |
| static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state); |
| struct intel_plane *plane, *linked; |
| struct intel_plane_state *plane_state; |
| int i; |
| |
| if (DISPLAY_VER(dev_priv) < 11) |
| return 0; |
| |
| /* |
| * Destroy all old plane links and make the slave plane invisible |
| * in the crtc_state->active_planes mask. |
| */ |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe != crtc->pipe || !plane_state->planar_linked_plane) |
| continue; |
| |
| plane_state->planar_linked_plane = NULL; |
| if (plane_state->planar_slave && !plane_state->uapi.visible) { |
| crtc_state->enabled_planes &= ~BIT(plane->id); |
| crtc_state->active_planes &= ~BIT(plane->id); |
| crtc_state->update_planes |= BIT(plane->id); |
| } |
| |
| plane_state->planar_slave = false; |
| } |
| |
| if (!crtc_state->nv12_planes) |
| return 0; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| struct intel_plane_state *linked_state = NULL; |
| |
| if (plane->pipe != crtc->pipe || |
| !(crtc_state->nv12_planes & BIT(plane->id))) |
| continue; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, linked) { |
| if (!icl_is_nv12_y_plane(dev_priv, linked->id)) |
| continue; |
| |
| if (crtc_state->active_planes & BIT(linked->id)) |
| continue; |
| |
| linked_state = intel_atomic_get_plane_state(state, linked); |
| if (IS_ERR(linked_state)) |
| return PTR_ERR(linked_state); |
| |
| break; |
| } |
| |
| if (!linked_state) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Need %d free Y planes for planar YUV\n", |
| hweight8(crtc_state->nv12_planes)); |
| |
| return -EINVAL; |
| } |
| |
| plane_state->planar_linked_plane = linked; |
| |
| linked_state->planar_slave = true; |
| linked_state->planar_linked_plane = plane; |
| crtc_state->enabled_planes |= BIT(linked->id); |
| crtc_state->active_planes |= BIT(linked->id); |
| crtc_state->update_planes |= BIT(linked->id); |
| drm_dbg_kms(&dev_priv->drm, "Using %s as Y plane for %s\n", |
| linked->base.name, plane->base.name); |
| |
| /* Copy parameters to slave plane */ |
| linked_state->ctl = plane_state->ctl | PLANE_CTL_YUV420_Y_PLANE; |
| linked_state->color_ctl = plane_state->color_ctl; |
| linked_state->view = plane_state->view; |
| |
| intel_plane_copy_hw_state(linked_state, plane_state); |
| linked_state->uapi.src = plane_state->uapi.src; |
| linked_state->uapi.dst = plane_state->uapi.dst; |
| |
| if (icl_is_hdr_plane(dev_priv, plane->id)) { |
| if (linked->id == PLANE_SPRITE5) |
| plane_state->cus_ctl |= PLANE_CUS_PLANE_7; |
| else if (linked->id == PLANE_SPRITE4) |
| plane_state->cus_ctl |= PLANE_CUS_PLANE_6; |
| else if (linked->id == PLANE_SPRITE3) |
| plane_state->cus_ctl |= PLANE_CUS_PLANE_5_RKL; |
| else if (linked->id == PLANE_SPRITE2) |
| plane_state->cus_ctl |= PLANE_CUS_PLANE_4_RKL; |
| else |
| MISSING_CASE(linked->id); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct intel_atomic_state *state = |
| to_intel_atomic_state(new_crtc_state->uapi.state); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| |
| return !old_crtc_state->c8_planes != !new_crtc_state->c8_planes; |
| } |
| |
| static u16 hsw_linetime_wm(const struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_display_mode *pipe_mode = |
| &crtc_state->hw.pipe_mode; |
| int linetime_wm; |
| |
| if (!crtc_state->hw.enable) |
| return 0; |
| |
| linetime_wm = DIV_ROUND_CLOSEST(pipe_mode->crtc_htotal * 1000 * 8, |
| pipe_mode->crtc_clock); |
| |
| return min(linetime_wm, 0x1ff); |
| } |
| |
| static u16 hsw_ips_linetime_wm(const struct intel_crtc_state *crtc_state, |
| const struct intel_cdclk_state *cdclk_state) |
| { |
| const struct drm_display_mode *pipe_mode = |
| &crtc_state->hw.pipe_mode; |
| int linetime_wm; |
| |
| if (!crtc_state->hw.enable) |
| return 0; |
| |
| linetime_wm = DIV_ROUND_CLOSEST(pipe_mode->crtc_htotal * 1000 * 8, |
| cdclk_state->logical.cdclk); |
| |
| return min(linetime_wm, 0x1ff); |
| } |
| |
| static u16 skl_linetime_wm(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct drm_display_mode *pipe_mode = |
| &crtc_state->hw.pipe_mode; |
| int linetime_wm; |
| |
| if (!crtc_state->hw.enable) |
| return 0; |
| |
| linetime_wm = DIV_ROUND_UP(pipe_mode->crtc_htotal * 1000 * 8, |
| crtc_state->pixel_rate); |
| |
| /* Display WA #1135: BXT:ALL GLK:ALL */ |
| if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) && |
| dev_priv->ipc_enabled) |
| linetime_wm /= 2; |
| |
| return min(linetime_wm, 0x1ff); |
| } |
| |
| static int hsw_compute_linetime_wm(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct intel_cdclk_state *cdclk_state; |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| crtc_state->linetime = skl_linetime_wm(crtc_state); |
| else |
| crtc_state->linetime = hsw_linetime_wm(crtc_state); |
| |
| if (!hsw_crtc_supports_ips(crtc)) |
| return 0; |
| |
| cdclk_state = intel_atomic_get_cdclk_state(state); |
| if (IS_ERR(cdclk_state)) |
| return PTR_ERR(cdclk_state); |
| |
| crtc_state->ips_linetime = hsw_ips_linetime_wm(crtc_state, |
| cdclk_state); |
| |
| return 0; |
| } |
| |
| static int intel_crtc_atomic_check(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| bool mode_changed = intel_crtc_needs_modeset(crtc_state); |
| int ret; |
| |
| if (DISPLAY_VER(dev_priv) < 5 && !IS_G4X(dev_priv) && |
| mode_changed && !crtc_state->hw.active) |
| crtc_state->update_wm_post = true; |
| |
| if (mode_changed && crtc_state->hw.enable && |
| dev_priv->dpll_funcs && |
| !crtc_state->bigjoiner_slave && |
| !drm_WARN_ON(&dev_priv->drm, crtc_state->shared_dpll)) { |
| ret = dev_priv->dpll_funcs->crtc_compute_clock(crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * May need to update pipe gamma enable bits |
| * when C8 planes are getting enabled/disabled. |
| */ |
| if (c8_planes_changed(crtc_state)) |
| crtc_state->uapi.color_mgmt_changed = true; |
| |
| if (mode_changed || crtc_state->update_pipe || |
| crtc_state->uapi.color_mgmt_changed) { |
| ret = intel_color_check(crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_compute_pipe_wm(state, crtc); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Target pipe watermarks are invalid\n"); |
| return ret; |
| } |
| |
| /* |
| * Calculate 'intermediate' watermarks that satisfy both the |
| * old state and the new state. We can program these |
| * immediately. |
| */ |
| ret = intel_compute_intermediate_wm(state, crtc); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "No valid intermediate pipe watermarks are possible\n"); |
| return ret; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| if (mode_changed || crtc_state->update_pipe) { |
| ret = skl_update_scaler_crtc(crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_atomic_setup_scalers(dev_priv, crtc, crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| if (HAS_IPS(dev_priv)) { |
| ret = hsw_compute_ips_config(crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) { |
| ret = hsw_compute_linetime_wm(state, crtc); |
| if (ret) |
| return ret; |
| |
| } |
| |
| ret = intel_psr2_sel_fetch_update(state, crtc); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void intel_modeset_update_connector_atomic_state(struct drm_device *dev) |
| { |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *conn_state = connector->base.state; |
| struct intel_encoder *encoder = |
| to_intel_encoder(connector->base.encoder); |
| |
| if (conn_state->crtc) |
| drm_connector_put(&connector->base); |
| |
| if (encoder) { |
| struct intel_crtc *crtc = |
| to_intel_crtc(encoder->base.crtc); |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| conn_state->best_encoder = &encoder->base; |
| conn_state->crtc = &crtc->base; |
| conn_state->max_bpc = (crtc_state->pipe_bpp ?: 24) / 3; |
| |
| drm_connector_get(&connector->base); |
| } else { |
| conn_state->best_encoder = NULL; |
| conn_state->crtc = NULL; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| } |
| |
| static int |
| compute_sink_pipe_bpp(const struct drm_connector_state *conn_state, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_connector *connector = conn_state->connector; |
| struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev); |
| const struct drm_display_info *info = &connector->display_info; |
| int bpp; |
| |
| switch (conn_state->max_bpc) { |
| case 6 ... 7: |
| bpp = 6 * 3; |
| break; |
| case 8 ... 9: |
| bpp = 8 * 3; |
| break; |
| case 10 ... 11: |
| bpp = 10 * 3; |
| break; |
| case 12 ... 16: |
| bpp = 12 * 3; |
| break; |
| default: |
| MISSING_CASE(conn_state->max_bpc); |
| return -EINVAL; |
| } |
| |
| if (bpp < pipe_config->pipe_bpp) { |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Limiting display bpp to %d instead of " |
| "EDID bpp %d, requested bpp %d, max platform bpp %d\n", |
| connector->base.id, connector->name, |
| bpp, 3 * info->bpc, |
| 3 * conn_state->max_requested_bpc, |
| pipe_config->pipe_bpp); |
| |
| pipe_config->pipe_bpp = bpp; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| compute_baseline_pipe_bpp(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct drm_atomic_state *state = pipe_config->uapi.state; |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int bpp, i; |
| |
| if ((IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv))) |
| bpp = 10*3; |
| else if (DISPLAY_VER(dev_priv) >= 5) |
| bpp = 12*3; |
| else |
| bpp = 8*3; |
| |
| pipe_config->pipe_bpp = bpp; |
| |
| /* Clamp display bpp to connector max bpp */ |
| for_each_new_connector_in_state(state, connector, connector_state, i) { |
| int ret; |
| |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| ret = compute_sink_pipe_bpp(connector_state, pipe_config); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void intel_dump_crtc_timings(struct drm_i915_private *i915, |
| const struct drm_display_mode *mode) |
| { |
| drm_dbg_kms(&i915->drm, "crtc timings: %d %d %d %d %d %d %d %d %d, " |
| "type: 0x%x flags: 0x%x\n", |
| mode->crtc_clock, |
| mode->crtc_hdisplay, mode->crtc_hsync_start, |
| mode->crtc_hsync_end, mode->crtc_htotal, |
| mode->crtc_vdisplay, mode->crtc_vsync_start, |
| mode->crtc_vsync_end, mode->crtc_vtotal, |
| mode->type, mode->flags); |
| } |
| |
| static void |
| intel_dump_m_n_config(const struct intel_crtc_state *pipe_config, |
| const char *id, unsigned int lane_count, |
| const struct intel_link_m_n *m_n) |
| { |
| struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev); |
| |
| drm_dbg_kms(&i915->drm, |
| "%s: lanes: %i; gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n", |
| id, lane_count, |
| m_n->gmch_m, m_n->gmch_n, |
| m_n->link_m, m_n->link_n, m_n->tu); |
| } |
| |
| static void |
| intel_dump_infoframe(struct drm_i915_private *dev_priv, |
| const union hdmi_infoframe *frame) |
| { |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, frame); |
| } |
| |
| static void |
| intel_dump_dp_vsc_sdp(struct drm_i915_private *dev_priv, |
| const struct drm_dp_vsc_sdp *vsc) |
| { |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| drm_dp_vsc_sdp_log(KERN_DEBUG, dev_priv->drm.dev, vsc); |
| } |
| |
| #define OUTPUT_TYPE(x) [INTEL_OUTPUT_ ## x] = #x |
| |
| static const char * const output_type_str[] = { |
| OUTPUT_TYPE(UNUSED), |
| OUTPUT_TYPE(ANALOG), |
| OUTPUT_TYPE(DVO), |
| OUTPUT_TYPE(SDVO), |
| OUTPUT_TYPE(LVDS), |
| OUTPUT_TYPE(TVOUT), |
| OUTPUT_TYPE(HDMI), |
| OUTPUT_TYPE(DP), |
| OUTPUT_TYPE(EDP), |
| OUTPUT_TYPE(DSI), |
| OUTPUT_TYPE(DDI), |
| OUTPUT_TYPE(DP_MST), |
| }; |
| |
| #undef OUTPUT_TYPE |
| |
| static void snprintf_output_types(char *buf, size_t len, |
| unsigned int output_types) |
| { |
| char *str = buf; |
| int i; |
| |
| str[0] = '\0'; |
| |
| for (i = 0; i < ARRAY_SIZE(output_type_str); i++) { |
| int r; |
| |
| if ((output_types & BIT(i)) == 0) |
| continue; |
| |
| r = snprintf(str, len, "%s%s", |
| str != buf ? "," : "", output_type_str[i]); |
| if (r >= len) |
| break; |
| str += r; |
| len -= r; |
| |
| output_types &= ~BIT(i); |
| } |
| |
| WARN_ON_ONCE(output_types != 0); |
| } |
| |
| static const char * const output_format_str[] = { |
| [INTEL_OUTPUT_FORMAT_RGB] = "RGB", |
| [INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0", |
| [INTEL_OUTPUT_FORMAT_YCBCR444] = "YCBCR4:4:4", |
| }; |
| |
| static const char *output_formats(enum intel_output_format format) |
| { |
| if (format >= ARRAY_SIZE(output_format_str)) |
| return "invalid"; |
| return output_format_str[format]; |
| } |
| |
| static void intel_dump_plane_state(const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| struct drm_i915_private *i915 = to_i915(plane->base.dev); |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| |
| if (!fb) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] fb: [NOFB], visible: %s\n", |
| plane->base.base.id, plane->base.name, |
| yesno(plane_state->uapi.visible)); |
| return; |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] fb: [FB:%d] %ux%u format = %p4cc modifier = 0x%llx, visible: %s\n", |
| plane->base.base.id, plane->base.name, |
| fb->base.id, fb->width, fb->height, &fb->format->format, |
| fb->modifier, yesno(plane_state->uapi.visible)); |
| drm_dbg_kms(&i915->drm, "\trotation: 0x%x, scaler: %d\n", |
| plane_state->hw.rotation, plane_state->scaler_id); |
| if (plane_state->uapi.visible) |
| drm_dbg_kms(&i915->drm, |
| "\tsrc: " DRM_RECT_FP_FMT " dst: " DRM_RECT_FMT "\n", |
| DRM_RECT_FP_ARG(&plane_state->uapi.src), |
| DRM_RECT_ARG(&plane_state->uapi.dst)); |
| } |
| |
| static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config, |
| struct intel_atomic_state *state, |
| const char *context) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct intel_plane_state *plane_state; |
| struct intel_plane *plane; |
| char buf[64]; |
| int i; |
| |
| drm_dbg_kms(&dev_priv->drm, "[CRTC:%d:%s] enable: %s %s\n", |
| crtc->base.base.id, crtc->base.name, |
| yesno(pipe_config->hw.enable), context); |
| |
| if (!pipe_config->hw.enable) |
| goto dump_planes; |
| |
| snprintf_output_types(buf, sizeof(buf), pipe_config->output_types); |
| drm_dbg_kms(&dev_priv->drm, |
| "active: %s, output_types: %s (0x%x), output format: %s\n", |
| yesno(pipe_config->hw.active), |
| buf, pipe_config->output_types, |
| output_formats(pipe_config->output_format)); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n", |
| transcoder_name(pipe_config->cpu_transcoder), |
| pipe_config->pipe_bpp, pipe_config->dither); |
| |
| drm_dbg_kms(&dev_priv->drm, "MST master transcoder: %s\n", |
| transcoder_name(pipe_config->mst_master_transcoder)); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "port sync: master transcoder: %s, slave transcoder bitmask = 0x%x\n", |
| transcoder_name(pipe_config->master_transcoder), |
| pipe_config->sync_mode_slaves_mask); |
| |
| drm_dbg_kms(&dev_priv->drm, "bigjoiner: %s\n", |
| pipe_config->bigjoiner_slave ? "slave" : |
| pipe_config->bigjoiner ? "master" : "no"); |
| |
| drm_dbg_kms(&dev_priv->drm, "splitter: %s, link count %d, overlap %d\n", |
| enableddisabled(pipe_config->splitter.enable), |
| pipe_config->splitter.link_count, |
| pipe_config->splitter.pixel_overlap); |
| |
| if (pipe_config->has_pch_encoder) |
| intel_dump_m_n_config(pipe_config, "fdi", |
| pipe_config->fdi_lanes, |
| &pipe_config->fdi_m_n); |
| |
| if (intel_crtc_has_dp_encoder(pipe_config)) { |
| intel_dump_m_n_config(pipe_config, "dp m_n", |
| pipe_config->lane_count, &pipe_config->dp_m_n); |
| if (pipe_config->has_drrs) |
| intel_dump_m_n_config(pipe_config, "dp m2_n2", |
| pipe_config->lane_count, |
| &pipe_config->dp_m2_n2); |
| } |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "audio: %i, infoframes: %i, infoframes enabled: 0x%x\n", |
| pipe_config->has_audio, pipe_config->has_infoframe, |
| pipe_config->infoframes.enable); |
| |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GENERAL_CONTROL)) |
| drm_dbg_kms(&dev_priv->drm, "GCP: 0x%x\n", |
| pipe_config->infoframes.gcp); |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_AVI)) |
| intel_dump_infoframe(dev_priv, &pipe_config->infoframes.avi); |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_SPD)) |
| intel_dump_infoframe(dev_priv, &pipe_config->infoframes.spd); |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_VENDOR)) |
| intel_dump_infoframe(dev_priv, &pipe_config->infoframes.hdmi); |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_DRM)) |
| intel_dump_infoframe(dev_priv, &pipe_config->infoframes.drm); |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA)) |
| intel_dump_infoframe(dev_priv, &pipe_config->infoframes.drm); |
| if (pipe_config->infoframes.enable & |
| intel_hdmi_infoframe_enable(DP_SDP_VSC)) |
| intel_dump_dp_vsc_sdp(dev_priv, &pipe_config->infoframes.vsc); |
| |
| drm_dbg_kms(&dev_priv->drm, "vrr: %s, vmin: %d, vmax: %d, pipeline full: %d, guardband: %d flipline: %d, vmin vblank: %d, vmax vblank: %d\n", |
| yesno(pipe_config->vrr.enable), |
| pipe_config->vrr.vmin, pipe_config->vrr.vmax, |
| pipe_config->vrr.pipeline_full, pipe_config->vrr.guardband, |
| pipe_config->vrr.flipline, |
| intel_vrr_vmin_vblank_start(pipe_config), |
| intel_vrr_vmax_vblank_start(pipe_config)); |
| |
| drm_dbg_kms(&dev_priv->drm, "requested mode:\n"); |
| drm_mode_debug_printmodeline(&pipe_config->hw.mode); |
| drm_dbg_kms(&dev_priv->drm, "adjusted mode:\n"); |
| drm_mode_debug_printmodeline(&pipe_config->hw.adjusted_mode); |
| intel_dump_crtc_timings(dev_priv, &pipe_config->hw.adjusted_mode); |
| drm_dbg_kms(&dev_priv->drm, "pipe mode:\n"); |
| drm_mode_debug_printmodeline(&pipe_config->hw.pipe_mode); |
| intel_dump_crtc_timings(dev_priv, &pipe_config->hw.pipe_mode); |
| drm_dbg_kms(&dev_priv->drm, |
| "port clock: %d, pipe src size: %dx%d, pixel rate %d\n", |
| pipe_config->port_clock, |
| pipe_config->pipe_src_w, pipe_config->pipe_src_h, |
| pipe_config->pixel_rate); |
| |
| drm_dbg_kms(&dev_priv->drm, "linetime: %d, ips linetime: %d\n", |
| pipe_config->linetime, pipe_config->ips_linetime); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| drm_dbg_kms(&dev_priv->drm, |
| "num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n", |
| crtc->num_scalers, |
| pipe_config->scaler_state.scaler_users, |
| pipe_config->scaler_state.scaler_id); |
| |
| if (HAS_GMCH(dev_priv)) |
| drm_dbg_kms(&dev_priv->drm, |
| "gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n", |
| pipe_config->gmch_pfit.control, |
| pipe_config->gmch_pfit.pgm_ratios, |
| pipe_config->gmch_pfit.lvds_border_bits); |
| else |
| drm_dbg_kms(&dev_priv->drm, |
| "pch pfit: " DRM_RECT_FMT ", %s, force thru: %s\n", |
| DRM_RECT_ARG(&pipe_config->pch_pfit.dst), |
| enableddisabled(pipe_config->pch_pfit.enabled), |
| yesno(pipe_config->pch_pfit.force_thru)); |
| |
| drm_dbg_kms(&dev_priv->drm, "ips: %i, double wide: %i\n", |
| pipe_config->ips_enabled, pipe_config->double_wide); |
| |
| intel_dpll_dump_hw_state(dev_priv, &pipe_config->dpll_hw_state); |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| drm_dbg_kms(&dev_priv->drm, |
| "cgm_mode: 0x%x gamma_mode: 0x%x gamma_enable: %d csc_enable: %d\n", |
| pipe_config->cgm_mode, pipe_config->gamma_mode, |
| pipe_config->gamma_enable, pipe_config->csc_enable); |
| else |
| drm_dbg_kms(&dev_priv->drm, |
| "csc_mode: 0x%x gamma_mode: 0x%x gamma_enable: %d csc_enable: %d\n", |
| pipe_config->csc_mode, pipe_config->gamma_mode, |
| pipe_config->gamma_enable, pipe_config->csc_enable); |
| |
| drm_dbg_kms(&dev_priv->drm, "degamma lut: %d entries, gamma lut: %d entries\n", |
| pipe_config->hw.degamma_lut ? |
| drm_color_lut_size(pipe_config->hw.degamma_lut) : 0, |
| pipe_config->hw.gamma_lut ? |
| drm_color_lut_size(pipe_config->hw.gamma_lut) : 0); |
| |
| dump_planes: |
| if (!state) |
| return; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe == crtc->pipe) |
| intel_dump_plane_state(plane_state); |
| } |
| } |
| |
| static bool check_digital_port_conflicts(struct intel_atomic_state *state) |
| { |
| struct drm_device *dev = state->base.dev; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| unsigned int used_ports = 0; |
| unsigned int used_mst_ports = 0; |
| bool ret = true; |
| |
| /* |
| * We're going to peek into connector->state, |
| * hence connection_mutex must be held. |
| */ |
| drm_modeset_lock_assert_held(&dev->mode_config.connection_mutex); |
| |
| /* |
| * Walk the connector list instead of the encoder |
| * list to detect the problem on ddi platforms |
| * where there's just one encoder per digital port. |
| */ |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *connector_state; |
| struct intel_encoder *encoder; |
| |
| connector_state = |
| drm_atomic_get_new_connector_state(&state->base, |
| connector); |
| if (!connector_state) |
| connector_state = connector->state; |
| |
| if (!connector_state->best_encoder) |
| continue; |
| |
| encoder = to_intel_encoder(connector_state->best_encoder); |
| |
| drm_WARN_ON(dev, !connector_state->crtc); |
| |
| switch (encoder->type) { |
| case INTEL_OUTPUT_DDI: |
| if (drm_WARN_ON(dev, !HAS_DDI(to_i915(dev)))) |
| break; |
| fallthrough; |
| case INTEL_OUTPUT_DP: |
| case INTEL_OUTPUT_HDMI: |
| case INTEL_OUTPUT_EDP: |
| /* the same port mustn't appear more than once */ |
| if (used_ports & BIT(encoder->port)) |
| ret = false; |
| |
| used_ports |= BIT(encoder->port); |
| break; |
| case INTEL_OUTPUT_DP_MST: |
| used_mst_ports |= |
| 1 << encoder->port; |
| break; |
| default: |
| break; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| /* can't mix MST and SST/HDMI on the same port */ |
| if (used_ports & used_mst_ports) |
| return false; |
| |
| return ret; |
| } |
| |
| static void |
| intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_atomic_state *state, |
| struct intel_crtc_state *crtc_state) |
| { |
| const struct intel_crtc_state *from_crtc_state = crtc_state; |
| |
| if (crtc_state->bigjoiner_slave) { |
| from_crtc_state = intel_atomic_get_new_crtc_state(state, |
| crtc_state->bigjoiner_linked_crtc); |
| |
| /* No need to copy state if the master state is unchanged */ |
| if (!from_crtc_state) |
| return; |
| } |
| |
| intel_crtc_copy_color_blobs(crtc_state, from_crtc_state); |
| } |
| |
| static void |
| intel_crtc_copy_uapi_to_hw_state(struct intel_atomic_state *state, |
| struct intel_crtc_state *crtc_state) |
| { |
| crtc_state->hw.enable = crtc_state->uapi.enable; |
| crtc_state->hw.active = crtc_state->uapi.active; |
| crtc_state->hw.mode = crtc_state->uapi.mode; |
| crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode; |
| crtc_state->hw.scaling_filter = crtc_state->uapi.scaling_filter; |
| |
| intel_crtc_copy_uapi_to_hw_state_nomodeset(state, crtc_state); |
| } |
| |
| static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state) |
| { |
| if (crtc_state->bigjoiner_slave) |
| return; |
| |
| crtc_state->uapi.enable = crtc_state->hw.enable; |
| crtc_state->uapi.active = crtc_state->hw.active; |
| drm_WARN_ON(crtc_state->uapi.crtc->dev, |
| drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0); |
| |
| crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode; |
| crtc_state->uapi.scaling_filter = crtc_state->hw.scaling_filter; |
| |
| /* copy color blobs to uapi */ |
| drm_property_replace_blob(&crtc_state->uapi.degamma_lut, |
| crtc_state->hw.degamma_lut); |
| drm_property_replace_blob(&crtc_state->uapi.gamma_lut, |
| crtc_state->hw.gamma_lut); |
| drm_property_replace_blob(&crtc_state->uapi.ctm, |
| crtc_state->hw.ctm); |
| } |
| |
| static int |
| copy_bigjoiner_crtc_state(struct intel_crtc_state *crtc_state, |
| const struct intel_crtc_state *from_crtc_state) |
| { |
| struct intel_crtc_state *saved_state; |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| |
| saved_state = kmemdup(from_crtc_state, sizeof(*saved_state), GFP_KERNEL); |
| if (!saved_state) |
| return -ENOMEM; |
| |
| saved_state->uapi = crtc_state->uapi; |
| saved_state->scaler_state = crtc_state->scaler_state; |
| saved_state->shared_dpll = crtc_state->shared_dpll; |
| saved_state->dpll_hw_state = crtc_state->dpll_hw_state; |
| saved_state->crc_enabled = crtc_state->crc_enabled; |
| |
| intel_crtc_free_hw_state(crtc_state); |
| memcpy(crtc_state, saved_state, sizeof(*crtc_state)); |
| kfree(saved_state); |
| |
| /* Re-init hw state */ |
| memset(&crtc_state->hw, 0, sizeof(saved_state->hw)); |
| crtc_state->hw.enable = from_crtc_state->hw.enable; |
| crtc_state->hw.active = from_crtc_state->hw.active; |
| crtc_state->hw.pipe_mode = from_crtc_state->hw.pipe_mode; |
| crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode; |
| |
| /* Some fixups */ |
| crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed; |
| crtc_state->uapi.connectors_changed = from_crtc_state->uapi.connectors_changed; |
| crtc_state->uapi.active_changed = from_crtc_state->uapi.active_changed; |
| crtc_state->nv12_planes = crtc_state->c8_planes = crtc_state->update_planes = 0; |
| crtc_state->bigjoiner_linked_crtc = to_intel_crtc(from_crtc_state->uapi.crtc); |
| crtc_state->bigjoiner_slave = true; |
| crtc_state->cpu_transcoder = (enum transcoder)crtc->pipe; |
| crtc_state->has_audio = false; |
| |
| return 0; |
| } |
| |
| static int |
| intel_crtc_prepare_cleared_state(struct intel_atomic_state *state, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *saved_state; |
| |
| saved_state = intel_crtc_state_alloc(crtc); |
| if (!saved_state) |
| return -ENOMEM; |
| |
| /* free the old crtc_state->hw members */ |
| intel_crtc_free_hw_state(crtc_state); |
| |
| /* FIXME: before the switch to atomic started, a new pipe_config was |
| * kzalloc'd. Code that depends on any field being zero should be |
| * fixed, so that the crtc_state can be safely duplicated. For now, |
| * only fields that are know to not cause problems are preserved. */ |
| |
| saved_state->uapi = crtc_state->uapi; |
| saved_state->scaler_state = crtc_state->scaler_state; |
| saved_state->shared_dpll = crtc_state->shared_dpll; |
| saved_state->dpll_hw_state = crtc_state->dpll_hw_state; |
| memcpy(saved_state->icl_port_dplls, crtc_state->icl_port_dplls, |
| sizeof(saved_state->icl_port_dplls)); |
| saved_state->crc_enabled = crtc_state->crc_enabled; |
| if (IS_G4X(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| saved_state->wm = crtc_state->wm; |
| |
| memcpy(crtc_state, saved_state, sizeof(*crtc_state)); |
| kfree(saved_state); |
| |
| intel_crtc_copy_uapi_to_hw_state(state, crtc_state); |
| |
| return 0; |
| } |
| |
| static int |
| intel_modeset_pipe_config(struct intel_atomic_state *state, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_crtc *crtc = pipe_config->uapi.crtc; |
| struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev); |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int base_bpp, ret, i; |
| bool retry = true; |
| |
| pipe_config->cpu_transcoder = |
| (enum transcoder) to_intel_crtc(crtc)->pipe; |
| |
| /* |
| * Sanitize sync polarity flags based on requested ones. If neither |
| * positive or negative polarity is requested, treat this as meaning |
| * negative polarity. |
| */ |
| if (!(pipe_config->hw.adjusted_mode.flags & |
| (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))) |
| pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (!(pipe_config->hw.adjusted_mode.flags & |
| (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) |
| pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| ret = compute_baseline_pipe_bpp(to_intel_crtc(crtc), |
| pipe_config); |
| if (ret) |
| return ret; |
| |
| base_bpp = pipe_config->pipe_bpp; |
| |
| /* |
| * Determine the real pipe dimensions. Note that stereo modes can |
| * increase the actual pipe size due to the frame doubling and |
| * insertion of additional space for blanks between the frame. This |
| * is stored in the crtc timings. We use the requested mode to do this |
| * computation to clearly distinguish it from the adjusted mode, which |
| * can be changed by the connectors in the below retry loop. |
| */ |
| drm_mode_get_hv_timing(&pipe_config->hw.mode, |
| &pipe_config->pipe_src_w, |
| &pipe_config->pipe_src_h); |
| |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(connector_state->best_encoder); |
| |
| if (connector_state->crtc != crtc) |
| continue; |
| |
| if (!check_single_encoder_cloning(state, to_intel_crtc(crtc), encoder)) { |
| drm_dbg_kms(&i915->drm, |
| "rejecting invalid cloning configuration\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Determine output_types before calling the .compute_config() |
| * hooks so that the hooks can use this information safely. |
| */ |
| if (encoder->compute_output_type) |
| pipe_config->output_types |= |
| BIT(encoder->compute_output_type(encoder, pipe_config, |
| connector_state)); |
| else |
| pipe_config->output_types |= BIT(encoder->type); |
| } |
| |
| encoder_retry: |
| /* Ensure the port clock defaults are reset when retrying. */ |
| pipe_config->port_clock = 0; |
| pipe_config->pixel_multiplier = 1; |
| |
| /* Fill in default crtc timings, allow encoders to overwrite them. */ |
| drm_mode_set_crtcinfo(&pipe_config->hw.adjusted_mode, |
| CRTC_STEREO_DOUBLE); |
| |
| /* Pass our mode to the connectors and the CRTC to give them a chance to |
| * adjust it according to limitations or connector properties, and also |
| * a chance to reject the mode entirely. |
| */ |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(connector_state->best_encoder); |
| |
| if (connector_state->crtc != crtc) |
| continue; |
| |
| ret = encoder->compute_config(encoder, pipe_config, |
| connector_state); |
| if (ret == -EDEADLK) |
| return ret; |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "Encoder config failure: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* Set default port clock if not overwritten by the encoder. Needs to be |
| * done afterwards in case the encoder adjusts the mode. */ |
| if (!pipe_config->port_clock) |
| pipe_config->port_clock = pipe_config->hw.adjusted_mode.crtc_clock |
| * pipe_config->pixel_multiplier; |
| |
| ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config); |
| if (ret == -EDEADLK) |
| return ret; |
| if (ret == -EAGAIN) { |
| if (drm_WARN(&i915->drm, !retry, |
| "loop in pipe configuration computation\n")) |
| return -EINVAL; |
| |
| drm_dbg_kms(&i915->drm, "CRTC bw constrained, retrying\n"); |
| retry = false; |
| goto encoder_retry; |
| } |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "CRTC config failure: %d\n", ret); |
| return ret; |
| } |
| |
| /* Dithering seems to not pass-through bits correctly when it should, so |
| * only enable it on 6bpc panels and when its not a compliance |
| * test requesting 6bpc video pattern. |
| */ |
| pipe_config->dither = (pipe_config->pipe_bpp == 6*3) && |
| !pipe_config->dither_force_disable; |
| drm_dbg_kms(&i915->drm, |
| "hw max bpp: %i, pipe bpp: %i, dithering: %i\n", |
| base_bpp, pipe_config->pipe_bpp, pipe_config->dither); |
| |
| return 0; |
| } |
| |
| static int |
| intel_modeset_pipe_config_late(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_atomic_state *state = |
| to_intel_atomic_state(crtc_state->uapi.state); |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_connector_state *conn_state; |
| struct drm_connector *connector; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, |
| conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| int ret; |
| |
| if (conn_state->crtc != &crtc->base || |
| !encoder->compute_config_late) |
| continue; |
| |
| ret = encoder->compute_config_late(encoder, crtc_state, |
| conn_state); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| bool intel_fuzzy_clock_check(int clock1, int clock2) |
| { |
| int diff; |
| |
| if (clock1 == clock2) |
| return true; |
| |
| if (!clock1 || !clock2) |
| return false; |
| |
| diff = abs(clock1 - clock2); |
| |
| if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105) |
| return true; |
| |
| return false; |
| } |
| |
| static bool |
| intel_compare_m_n(unsigned int m, unsigned int n, |
| unsigned int m2, unsigned int n2, |
| bool exact) |
| { |
| if (m == m2 && n == n2) |
| return true; |
| |
| if (exact || !m || !n || !m2 || !n2) |
| return false; |
| |
| BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX); |
| |
| if (n > n2) { |
| while (n > n2) { |
| m2 <<= 1; |
| n2 <<= 1; |
| } |
| } else if (n < n2) { |
| while (n < n2) { |
| m <<= 1; |
| n <<= 1; |
| } |
| } |
| |
| if (n != n2) |
| return false; |
| |
| return intel_fuzzy_clock_check(m, m2); |
| } |
| |
| static bool |
| intel_compare_link_m_n(const struct intel_link_m_n *m_n, |
| const struct intel_link_m_n *m2_n2, |
| bool exact) |
| { |
| return m_n->tu == m2_n2->tu && |
| intel_compare_m_n(m_n->gmch_m, m_n->gmch_n, |
| m2_n2->gmch_m, m2_n2->gmch_n, exact) && |
| intel_compare_m_n(m_n->link_m, m_n->link_n, |
| m2_n2->link_m, m2_n2->link_n, exact); |
| } |
| |
| static bool |
| intel_compare_infoframe(const union hdmi_infoframe *a, |
| const union hdmi_infoframe *b) |
| { |
| return memcmp(a, b, sizeof(*a)) == 0; |
| } |
| |
| static bool |
| intel_compare_dp_vsc_sdp(const struct drm_dp_vsc_sdp *a, |
| const struct drm_dp_vsc_sdp *b) |
| { |
| return memcmp(a, b, sizeof(*a)) == 0; |
| } |
| |
| static void |
| pipe_config_infoframe_mismatch(struct drm_i915_private *dev_priv, |
| bool fastset, const char *name, |
| const union hdmi_infoframe *a, |
| const union hdmi_infoframe *b) |
| { |
| if (fastset) { |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "fastset mismatch in %s infoframe\n", name); |
| drm_dbg_kms(&dev_priv->drm, "expected:\n"); |
| hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, a); |
| drm_dbg_kms(&dev_priv->drm, "found:\n"); |
| hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, b); |
| } else { |
| drm_err(&dev_priv->drm, "mismatch in %s infoframe\n", name); |
| drm_err(&dev_priv->drm, "expected:\n"); |
| hdmi_infoframe_log(KERN_ERR, dev_priv->drm.dev, a); |
| drm_err(&dev_priv->drm, "found:\n"); |
| hdmi_infoframe_log(KERN_ERR, dev_priv->drm.dev, b); |
| } |
| } |
| |
| static void |
| pipe_config_dp_vsc_sdp_mismatch(struct drm_i915_private *dev_priv, |
| bool fastset, const char *name, |
| const struct drm_dp_vsc_sdp *a, |
| const struct drm_dp_vsc_sdp *b) |
| { |
| if (fastset) { |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "fastset mismatch in %s dp sdp\n", name); |
| drm_dbg_kms(&dev_priv->drm, "expected:\n"); |
| drm_dp_vsc_sdp_log(KERN_DEBUG, dev_priv->drm.dev, a); |
| drm_dbg_kms(&dev_priv->drm, "found:\n"); |
| drm_dp_vsc_sdp_log(KERN_DEBUG, dev_priv->drm.dev, b); |
| } else { |
| drm_err(&dev_priv->drm, "mismatch in %s dp sdp\n", name); |
| drm_err(&dev_priv->drm, "expected:\n"); |
| drm_dp_vsc_sdp_log(KERN_ERR, dev_priv->drm.dev, a); |
| drm_err(&dev_priv->drm, "found:\n"); |
| drm_dp_vsc_sdp_log(KERN_ERR, dev_priv->drm.dev, b); |
| } |
| } |
| |
| static void __printf(4, 5) |
| pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc, |
| const char *name, const char *format, ...) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct va_format vaf; |
| va_list args; |
| |
| va_start(args, format); |
| vaf.fmt = format; |
| vaf.va = &args; |
| |
| if (fastset) |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] fastset mismatch in %s %pV\n", |
| crtc->base.base.id, crtc->base.name, name, &vaf); |
| else |
| drm_err(&i915->drm, "[CRTC:%d:%s] mismatch in %s %pV\n", |
| crtc->base.base.id, crtc->base.name, name, &vaf); |
| |
| va_end(args); |
| } |
| |
| static bool fastboot_enabled(struct drm_i915_private *dev_priv) |
| { |
| if (dev_priv->params.fastboot != -1) |
| return dev_priv->params.fastboot; |
| |
| /* Enable fastboot by default on Skylake and newer */ |
| if (DISPLAY_VER(dev_priv) >= 9) |
| return true; |
| |
| /* Enable fastboot by default on VLV and CHV */ |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| return true; |
| |
| /* Disabled by default on all others */ |
| return false; |
| } |
| |
| static bool |
| intel_pipe_config_compare(const struct intel_crtc_state *current_config, |
| const struct intel_crtc_state *pipe_config, |
| bool fastset) |
| { |
| struct drm_i915_private *dev_priv = to_i915(current_config->uapi.crtc->dev); |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| bool ret = true; |
| u32 bp_gamma = 0; |
| bool fixup_inherited = fastset && |
| current_config->inherited && !pipe_config->inherited; |
| |
| if (fixup_inherited && !fastboot_enabled(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "initial modeset and fastboot not set\n"); |
| ret = false; |
| } |
| |
| #define PIPE_CONF_CHECK_X(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected 0x%08x, found 0x%08x)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_X_WITH_MASK(name, mask) do { \ |
| if ((current_config->name & (mask)) != (pipe_config->name & (mask))) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected 0x%08x, found 0x%08x)", \ |
| current_config->name & (mask), \ |
| pipe_config->name & (mask)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_I(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected %i, found %i)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_BOOL(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected %s, found %s)", \ |
| yesno(current_config->name), \ |
| yesno(pipe_config->name)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| /* |
| * Checks state where we only read out the enabling, but not the entire |
| * state itself (like full infoframes or ELD for audio). These states |
| * require a full modeset on bootup to fix up. |
| */ |
| #define PIPE_CONF_CHECK_BOOL_INCOMPLETE(name) do { \ |
| if (!fixup_inherited || (!current_config->name && !pipe_config->name)) { \ |
| PIPE_CONF_CHECK_BOOL(name); \ |
| } else { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "unable to verify whether state matches exactly, forcing modeset (expected %s, found %s)", \ |
| yesno(current_config->name), \ |
| yesno(pipe_config->name)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_P(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected %p, found %p)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_M_N(name) do { \ |
| if (!intel_compare_link_m_n(¤t_config->name, \ |
| &pipe_config->name,\ |
| !fastset)) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected tu %i gmch %i/%i link %i/%i, " \ |
| "found tu %i, gmch %i/%i link %i/%i)", \ |
| current_config->name.tu, \ |
| current_config->name.gmch_m, \ |
| current_config->name.gmch_n, \ |
| current_config->name.link_m, \ |
| current_config->name.link_n, \ |
| pipe_config->name.tu, \ |
| pipe_config->name.gmch_m, \ |
| pipe_config->name.gmch_n, \ |
| pipe_config->name.link_m, \ |
| pipe_config->name.link_n); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| /* This is required for BDW+ where there is only one set of registers for |
| * switching between high and low RR. |
| * This macro can be used whenever a comparison has to be made between one |
| * hw state and multiple sw state variables. |
| */ |
| #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) do { \ |
| if (!intel_compare_link_m_n(¤t_config->name, \ |
| &pipe_config->name, !fastset) && \ |
| !intel_compare_link_m_n(¤t_config->alt_name, \ |
| &pipe_config->name, !fastset)) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected tu %i gmch %i/%i link %i/%i, " \ |
| "or tu %i gmch %i/%i link %i/%i, " \ |
| "found tu %i, gmch %i/%i link %i/%i)", \ |
| current_config->name.tu, \ |
| current_config->name.gmch_m, \ |
| current_config->name.gmch_n, \ |
| current_config->name.link_m, \ |
| current_config->name.link_n, \ |
| current_config->alt_name.tu, \ |
| current_config->alt_name.gmch_m, \ |
| current_config->alt_name.gmch_n, \ |
| current_config->alt_name.link_m, \ |
| current_config->alt_name.link_n, \ |
| pipe_config->name.tu, \ |
| pipe_config->name.gmch_m, \ |
| pipe_config->name.gmch_n, \ |
| pipe_config->name.link_m, \ |
| pipe_config->name.link_n); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_FLAGS(name, mask) do { \ |
| if ((current_config->name ^ pipe_config->name) & (mask)) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(%x) (expected %i, found %i)", \ |
| (mask), \ |
| current_config->name & (mask), \ |
| pipe_config->name & (mask)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) do { \ |
| if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name), \ |
| "(expected %i, found %i)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_INFOFRAME(name) do { \ |
| if (!intel_compare_infoframe(¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name)) { \ |
| pipe_config_infoframe_mismatch(dev_priv, fastset, __stringify(name), \ |
| ¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_DP_VSC_SDP(name) do { \ |
| if (!current_config->has_psr && !pipe_config->has_psr && \ |
| !intel_compare_dp_vsc_sdp(¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name)) { \ |
| pipe_config_dp_vsc_sdp_mismatch(dev_priv, fastset, __stringify(name), \ |
| ¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_COLOR_LUT(name1, name2, bit_precision) do { \ |
| if (current_config->name1 != pipe_config->name1) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name1), \ |
| "(expected %i, found %i, won't compare lut values)", \ |
| current_config->name1, \ |
| pipe_config->name1); \ |
| ret = false;\ |
| } else { \ |
| if (!intel_color_lut_equal(current_config->name2, \ |
| pipe_config->name2, pipe_config->name1, \ |
| bit_precision)) { \ |
| pipe_config_mismatch(fastset, crtc, __stringify(name2), \ |
| "hw_state doesn't match sw_state"); \ |
| ret = false; \ |
| } \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_QUIRK(quirk) \ |
| ((current_config->quirks | pipe_config->quirks) & (quirk)) |
| |
| PIPE_CONF_CHECK_I(cpu_transcoder); |
| |
| PIPE_CONF_CHECK_BOOL(has_pch_encoder); |
| PIPE_CONF_CHECK_I(fdi_lanes); |
| PIPE_CONF_CHECK_M_N(fdi_m_n); |
| |
| PIPE_CONF_CHECK_I(lane_count); |
| PIPE_CONF_CHECK_X(lane_lat_optim_mask); |
| |
| if (DISPLAY_VER(dev_priv) < 8) { |
| PIPE_CONF_CHECK_M_N(dp_m_n); |
| |
| if (current_config->has_drrs) |
| PIPE_CONF_CHECK_M_N(dp_m2_n2); |
| } else |
| PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2); |
| |
| PIPE_CONF_CHECK_X(output_types); |
| |
| /* FIXME do the readout properly and get rid of this quirk */ |
| if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) { |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hdisplay); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_htotal); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hblank_start); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hblank_end); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hsync_start); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hsync_end); |
| |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_vdisplay); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_vtotal); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_vblank_start); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_vblank_end); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_vsync_start); |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_vsync_end); |
| |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hdisplay); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_htotal); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hblank_start); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hblank_end); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hsync_start); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hsync_end); |
| |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vdisplay); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vtotal); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vblank_start); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vblank_end); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vsync_start); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vsync_end); |
| |
| PIPE_CONF_CHECK_I(pixel_multiplier); |
| |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_INTERLACE); |
| |
| if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) { |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_PHSYNC); |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_NHSYNC); |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_PVSYNC); |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_NVSYNC); |
| } |
| } |
| |
| PIPE_CONF_CHECK_I(output_format); |
| PIPE_CONF_CHECK_BOOL(has_hdmi_sink); |
| if ((DISPLAY_VER(dev_priv) < 8 && !IS_HASWELL(dev_priv)) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| PIPE_CONF_CHECK_BOOL(limited_color_range); |
| |
| PIPE_CONF_CHECK_BOOL(hdmi_scrambling); |
| PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio); |
| PIPE_CONF_CHECK_BOOL(has_infoframe); |
| /* FIXME do the readout properly and get rid of this quirk */ |
| if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) |
| PIPE_CONF_CHECK_BOOL(fec_enable); |
| |
| PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio); |
| |
| PIPE_CONF_CHECK_X(gmch_pfit.control); |
| /* pfit ratios are autocomputed by the hw on gen4+ */ |
| if (DISPLAY_VER(dev_priv) < 4) |
| PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios); |
| PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits); |
| |
| /* |
| * Changing the EDP transcoder input mux |
| * (A_ONOFF vs. A_ON) requires a full modeset. |
| */ |
| PIPE_CONF_CHECK_BOOL(pch_pfit.force_thru); |
| |
| if (!fastset) { |
| PIPE_CONF_CHECK_I(pipe_src_w); |
| PIPE_CONF_CHECK_I(pipe_src_h); |
| |
| PIPE_CONF_CHECK_BOOL(pch_pfit.enabled); |
| if (current_config->pch_pfit.enabled) { |
| PIPE_CONF_CHECK_I(pch_pfit.dst.x1); |
| PIPE_CONF_CHECK_I(pch_pfit.dst.y1); |
| PIPE_CONF_CHECK_I(pch_pfit.dst.x2); |
| PIPE_CONF_CHECK_I(pch_pfit.dst.y2); |
| } |
| |
| PIPE_CONF_CHECK_I(scaler_state.scaler_id); |
| /* FIXME do the readout properly and get rid of this quirk */ |
| if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) |
| PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate); |
| |
| PIPE_CONF_CHECK_X(gamma_mode); |
| if (IS_CHERRYVIEW(dev_priv)) |
| PIPE_CONF_CHECK_X(cgm_mode); |
| else |
| PIPE_CONF_CHECK_X(csc_mode); |
| PIPE_CONF_CHECK_BOOL(gamma_enable); |
| PIPE_CONF_CHECK_BOOL(csc_enable); |
| |
| PIPE_CONF_CHECK_I(linetime); |
| PIPE_CONF_CHECK_I(ips_linetime); |
| |
| bp_gamma = intel_color_get_gamma_bit_precision(pipe_config); |
| if (bp_gamma) |
| PIPE_CONF_CHECK_COLOR_LUT(gamma_mode, hw.gamma_lut, bp_gamma); |
| |
| if (current_config->active_planes) { |
| PIPE_CONF_CHECK_BOOL(has_psr); |
| PIPE_CONF_CHECK_BOOL(has_psr2); |
| PIPE_CONF_CHECK_BOOL(enable_psr2_sel_fetch); |
| PIPE_CONF_CHECK_I(dc3co_exitline); |
| } |
| } |
| |
| PIPE_CONF_CHECK_BOOL(double_wide); |
| |
| if (dev_priv->dpll.mgr) |
| PIPE_CONF_CHECK_P(shared_dpll); |
| |
| /* FIXME do the readout properly and get rid of this quirk */ |
| if (dev_priv->dpll.mgr && !PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) { |
| PIPE_CONF_CHECK_X(dpll_hw_state.dpll); |
| PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md); |
| PIPE_CONF_CHECK_X(dpll_hw_state.fp0); |
| PIPE_CONF_CHECK_X(dpll_hw_state.fp1); |
| PIPE_CONF_CHECK_X(dpll_hw_state.wrpll); |
| PIPE_CONF_CHECK_X(dpll_hw_state.spll); |
| PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1); |
| PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1); |
| PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2); |
| PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr0); |
| PIPE_CONF_CHECK_X(dpll_hw_state.ebb0); |
| PIPE_CONF_CHECK_X(dpll_hw_state.ebb4); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll0); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll1); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll2); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll3); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll6); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll8); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll9); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pll10); |
| PIPE_CONF_CHECK_X(dpll_hw_state.pcsdw12); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_refclkin_ctl); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_clktop2_coreclkctl1); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_clktop2_hsclkctl); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_div0); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_div1); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_lf); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_frac_lock); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_ssc); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_bias); |
| PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_tdc_coldst_bias); |
| } |
| |
| if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) { |
| PIPE_CONF_CHECK_X(dsi_pll.ctrl); |
| PIPE_CONF_CHECK_X(dsi_pll.div); |
| |
| if (IS_G4X(dev_priv) || DISPLAY_VER(dev_priv) >= 5) |
| PIPE_CONF_CHECK_I(pipe_bpp); |
| |
| PIPE_CONF_CHECK_CLOCK_FUZZY(hw.pipe_mode.crtc_clock); |
| PIPE_CONF_CHECK_CLOCK_FUZZY(hw.adjusted_mode.crtc_clock); |
| PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock); |
| |
| PIPE_CONF_CHECK_I(min_voltage_level); |
| } |
| |
| if (current_config->has_psr || pipe_config->has_psr) |
| PIPE_CONF_CHECK_X_WITH_MASK(infoframes.enable, |
| ~intel_hdmi_infoframe_enable(DP_SDP_VSC)); |
| else |
| PIPE_CONF_CHECK_X(infoframes.enable); |
| |
| PIPE_CONF_CHECK_X(infoframes.gcp); |
| PIPE_CONF_CHECK_INFOFRAME(avi); |
| PIPE_CONF_CHECK_INFOFRAME(spd); |
| PIPE_CONF_CHECK_INFOFRAME(hdmi); |
| PIPE_CONF_CHECK_INFOFRAME(drm); |
| PIPE_CONF_CHECK_DP_VSC_SDP(vsc); |
| |
| PIPE_CONF_CHECK_X(sync_mode_slaves_mask); |
| PIPE_CONF_CHECK_I(master_transcoder); |
| PIPE_CONF_CHECK_BOOL(bigjoiner); |
| PIPE_CONF_CHECK_BOOL(bigjoiner_slave); |
| PIPE_CONF_CHECK_P(bigjoiner_linked_crtc); |
| |
| PIPE_CONF_CHECK_I(dsc.compression_enable); |
| PIPE_CONF_CHECK_I(dsc.dsc_split); |
| PIPE_CONF_CHECK_I(dsc.compressed_bpp); |
| |
| PIPE_CONF_CHECK_BOOL(splitter.enable); |
| PIPE_CONF_CHECK_I(splitter.link_count); |
| PIPE_CONF_CHECK_I(splitter.pixel_overlap); |
| |
| PIPE_CONF_CHECK_I(mst_master_transcoder); |
| |
| PIPE_CONF_CHECK_BOOL(vrr.enable); |
| PIPE_CONF_CHECK_I(vrr.vmin); |
| PIPE_CONF_CHECK_I(vrr.vmax); |
| PIPE_CONF_CHECK_I(vrr.flipline); |
| PIPE_CONF_CHECK_I(vrr.pipeline_full); |
| PIPE_CONF_CHECK_I(vrr.guardband); |
| |
| #undef PIPE_CONF_CHECK_X |
| #undef PIPE_CONF_CHECK_I |
| #undef PIPE_CONF_CHECK_BOOL |
| #undef PIPE_CONF_CHECK_BOOL_INCOMPLETE |
| #undef PIPE_CONF_CHECK_P |
| #undef PIPE_CONF_CHECK_FLAGS |
| #undef PIPE_CONF_CHECK_CLOCK_FUZZY |
| #undef PIPE_CONF_CHECK_COLOR_LUT |
| #undef PIPE_CONF_QUIRK |
| |
| return ret; |
| } |
| |
| static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv, |
| const struct intel_crtc_state *pipe_config) |
| { |
| if (pipe_config->has_pch_encoder) { |
| int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config), |
| &pipe_config->fdi_m_n); |
| int dotclock = pipe_config->hw.adjusted_mode.crtc_clock; |
| |
| /* |
| * FDI already provided one idea for the dotclock. |
| * Yell if the encoder disagrees. |
| */ |
| drm_WARN(&dev_priv->drm, |
| !intel_fuzzy_clock_check(fdi_dotclock, dotclock), |
| "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n", |
| fdi_dotclock, dotclock); |
| } |
| } |
| |
| static void verify_wm_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct skl_hw_state { |
| struct skl_ddb_entry ddb_y[I915_MAX_PLANES]; |
| struct skl_ddb_entry ddb_uv[I915_MAX_PLANES]; |
| struct skl_pipe_wm wm; |
| } *hw; |
| const struct skl_pipe_wm *sw_wm = &new_crtc_state->wm.skl.optimal; |
| int level, max_level = ilk_wm_max_level(dev_priv); |
| struct intel_plane *plane; |
| u8 hw_enabled_slices; |
| |
| if (DISPLAY_VER(dev_priv) < 9 || !new_crtc_state->hw.active) |
| return; |
| |
| hw = kzalloc(sizeof(*hw), GFP_KERNEL); |
| if (!hw) |
| return; |
| |
| skl_pipe_wm_get_hw_state(crtc, &hw->wm); |
| |
| skl_pipe_ddb_get_hw_state(crtc, hw->ddb_y, hw->ddb_uv); |
| |
| hw_enabled_slices = intel_enabled_dbuf_slices_mask(dev_priv); |
| |
| if (DISPLAY_VER(dev_priv) >= 11 && |
| hw_enabled_slices != dev_priv->dbuf.enabled_slices) |
| drm_err(&dev_priv->drm, |
| "mismatch in DBUF Slices (expected 0x%x, got 0x%x)\n", |
| dev_priv->dbuf.enabled_slices, |
| hw_enabled_slices); |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { |
| const struct skl_ddb_entry *hw_ddb_entry, *sw_ddb_entry; |
| const struct skl_wm_level *hw_wm_level, *sw_wm_level; |
| |
| /* Watermarks */ |
| for (level = 0; level <= max_level; level++) { |
| hw_wm_level = &hw->wm.planes[plane->id].wm[level]; |
| sw_wm_level = skl_plane_wm_level(sw_wm, plane->id, level); |
| |
| if (skl_wm_level_equals(hw_wm_level, sw_wm_level)) |
| continue; |
| |
| drm_err(&dev_priv->drm, |
| "[PLANE:%d:%s] mismatch in WM%d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, level, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| hw_wm_level = &hw->wm.planes[plane->id].trans_wm; |
| sw_wm_level = skl_plane_trans_wm(sw_wm, plane->id); |
| |
| if (!skl_wm_level_equals(hw_wm_level, sw_wm_level)) { |
| drm_err(&dev_priv->drm, |
| "[PLANE:%d:%s] mismatch in trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0; |
| sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0; |
| |
| if (HAS_HW_SAGV_WM(dev_priv) && |
| !skl_wm_level_equals(hw_wm_level, sw_wm_level)) { |
| drm_err(&dev_priv->drm, |
| "[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm; |
| sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm; |
| |
| if (HAS_HW_SAGV_WM(dev_priv) && |
| !skl_wm_level_equals(hw_wm_level, sw_wm_level)) { |
| drm_err(&dev_priv->drm, |
| "[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| /* DDB */ |
| hw_ddb_entry = &hw->ddb_y[plane->id]; |
| sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane->id]; |
| |
| if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) { |
| drm_err(&dev_priv->drm, |
| "[PLANE:%d:%s] mismatch in DDB (expected (%u,%u), found (%u,%u))\n", |
| plane->base.base.id, plane->base.name, |
| sw_ddb_entry->start, sw_ddb_entry->end, |
| hw_ddb_entry->start, hw_ddb_entry->end); |
| } |
| } |
| |
| kfree(hw); |
| } |
| |
| static void |
| verify_connector_state(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_connector *connector; |
| struct drm_connector_state *new_conn_state; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, new_conn_state, i) { |
| struct drm_encoder *encoder = connector->encoder; |
| struct intel_crtc_state *crtc_state = NULL; |
| |
| if (new_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (crtc) |
| crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| |
| intel_connector_verify_state(crtc_state, new_conn_state); |
| |
| I915_STATE_WARN(new_conn_state->best_encoder != encoder, |
| "connector's atomic encoder doesn't match legacy encoder\n"); |
| } |
| } |
| |
| static void |
| verify_encoder_state(struct drm_i915_private *dev_priv, struct intel_atomic_state *state) |
| { |
| struct intel_encoder *encoder; |
| struct drm_connector *connector; |
| struct drm_connector_state *old_conn_state, *new_conn_state; |
| int i; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| bool enabled = false, found = false; |
| enum pipe pipe; |
| |
| drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s]\n", |
| encoder->base.base.id, |
| encoder->base.name); |
| |
| for_each_oldnew_connector_in_state(&state->base, connector, old_conn_state, |
| new_conn_state, i) { |
| if (old_conn_state->best_encoder == &encoder->base) |
| found = true; |
| |
| if (new_conn_state->best_encoder != &encoder->base) |
| continue; |
| found = enabled = true; |
| |
| I915_STATE_WARN(new_conn_state->crtc != |
| encoder->base.crtc, |
| "connector's crtc doesn't match encoder crtc\n"); |
| } |
| |
| if (!found) |
| continue; |
| |
| I915_STATE_WARN(!!encoder->base.crtc != enabled, |
| "encoder's enabled state mismatch " |
| "(expected %i, found %i)\n", |
| !!encoder->base.crtc, enabled); |
| |
| if (!encoder->base.crtc) { |
| bool active; |
| |
| active = encoder->get_hw_state(encoder, &pipe); |
| I915_STATE_WARN(active, |
| "encoder detached but still enabled on pipe %c.\n", |
| pipe_name(pipe)); |
| } |
| } |
| } |
| |
| static void |
| verify_crtc_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_encoder *encoder; |
| struct intel_crtc_state *pipe_config = old_crtc_state; |
| struct drm_atomic_state *state = old_crtc_state->uapi.state; |
| struct intel_crtc *master = crtc; |
| |
| __drm_atomic_helper_crtc_destroy_state(&old_crtc_state->uapi); |
| intel_crtc_free_hw_state(old_crtc_state); |
| intel_crtc_state_reset(old_crtc_state, crtc); |
| old_crtc_state->uapi.state = state; |
| |
| drm_dbg_kms(&dev_priv->drm, "[CRTC:%d:%s]\n", crtc->base.base.id, |
| crtc->base.name); |
| |
| pipe_config->hw.enable = new_crtc_state->hw.enable; |
| |
| intel_crtc_get_pipe_config(pipe_config); |
| |
| /* we keep both pipes enabled on 830 */ |
| if (IS_I830(dev_priv) && pipe_config->hw.active) |
| pipe_config->hw.active = new_crtc_state->hw.active; |
| |
| I915_STATE_WARN(new_crtc_state->hw.active != pipe_config->hw.active, |
| "crtc active state doesn't match with hw state " |
| "(expected %i, found %i)\n", |
| new_crtc_state->hw.active, pipe_config->hw.active); |
| |
| I915_STATE_WARN(crtc->active != new_crtc_state->hw.active, |
| "transitional active state does not match atomic hw state " |
| "(expected %i, found %i)\n", |
| new_crtc_state->hw.active, crtc->active); |
| |
| if (new_crtc_state->bigjoiner_slave) |
| master = new_crtc_state->bigjoiner_linked_crtc; |
| |
| for_each_encoder_on_crtc(dev, &master->base, encoder) { |
| enum pipe pipe; |
| bool active; |
| |
| active = encoder->get_hw_state(encoder, &pipe); |
| I915_STATE_WARN(active != new_crtc_state->hw.active, |
| "[ENCODER:%i] active %i with crtc active %i\n", |
| encoder->base.base.id, active, |
| new_crtc_state->hw.active); |
| |
| I915_STATE_WARN(active && master->pipe != pipe, |
| "Encoder connected to wrong pipe %c\n", |
| pipe_name(pipe)); |
| |
| if (active) |
| intel_encoder_get_config(encoder, pipe_config); |
| } |
| |
| if (!new_crtc_state->hw.active) |
| return; |
| |
| if (new_crtc_state->bigjoiner_slave) |
| /* No PLLs set for slave */ |
| pipe_config->shared_dpll = NULL; |
| |
| intel_pipe_config_sanity_check(dev_priv, pipe_config); |
| |
| if (!intel_pipe_config_compare(new_crtc_state, |
| pipe_config, false)) { |
| I915_STATE_WARN(1, "pipe state doesn't match!\n"); |
| intel_dump_pipe_config(pipe_config, NULL, "[hw state]"); |
| intel_dump_pipe_config(new_crtc_state, NULL, "[sw state]"); |
| } |
| } |
| |
| static void |
| intel_verify_planes(struct intel_atomic_state *state) |
| { |
| struct intel_plane *plane; |
| const struct intel_plane_state *plane_state; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, |
| plane_state, i) |
| assert_plane(plane, plane_state->planar_slave || |
| plane_state->uapi.visible); |
| } |
| |
| static void |
| verify_single_dpll_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_crtc *crtc, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_dpll_hw_state dpll_hw_state; |
| u8 pipe_mask; |
| bool active; |
| |
| memset(&dpll_hw_state, 0, sizeof(dpll_hw_state)); |
| |
| drm_dbg_kms(&dev_priv->drm, "%s\n", pll->info->name); |
| |
| active = intel_dpll_get_hw_state(dev_priv, pll, &dpll_hw_state); |
| |
| if (!(pll->info->flags & INTEL_DPLL_ALWAYS_ON)) { |
| I915_STATE_WARN(!pll->on && pll->active_mask, |
| "pll in active use but not on in sw tracking\n"); |
| I915_STATE_WARN(pll->on && !pll->active_mask, |
| "pll is on but not used by any active pipe\n"); |
| I915_STATE_WARN(pll->on != active, |
| "pll on state mismatch (expected %i, found %i)\n", |
| pll->on, active); |
| } |
| |
| if (!crtc) { |
| I915_STATE_WARN(pll->active_mask & ~pll->state.pipe_mask, |
| "more active pll users than references: 0x%x vs 0x%x\n", |
| pll->active_mask, pll->state.pipe_mask); |
| |
| return; |
| } |
| |
| pipe_mask = BIT(crtc->pipe); |
| |
| if (new_crtc_state->hw.active) |
| I915_STATE_WARN(!(pll->active_mask & pipe_mask), |
| "pll active mismatch (expected pipe %c in active mask 0x%x)\n", |
| pipe_name(crtc->pipe), pll->active_mask); |
| else |
| I915_STATE_WARN(pll->active_mask & pipe_mask, |
| "pll active mismatch (didn't expect pipe %c in active mask 0x%x)\n", |
| pipe_name(crtc->pipe), pll->active_mask); |
| |
| I915_STATE_WARN(!(pll->state.pipe_mask & pipe_mask), |
| "pll enabled crtcs mismatch (expected 0x%x in 0x%x)\n", |
| pipe_mask, pll->state.pipe_mask); |
| |
| I915_STATE_WARN(pll->on && memcmp(&pll->state.hw_state, |
| &dpll_hw_state, |
| sizeof(dpll_hw_state)), |
| "pll hw state mismatch\n"); |
| } |
| |
| static void |
| verify_shared_dpll_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (new_crtc_state->shared_dpll) |
| verify_single_dpll_state(dev_priv, new_crtc_state->shared_dpll, crtc, new_crtc_state); |
| |
| if (old_crtc_state->shared_dpll && |
| old_crtc_state->shared_dpll != new_crtc_state->shared_dpll) { |
| u8 pipe_mask = BIT(crtc->pipe); |
| struct intel_shared_dpll *pll = old_crtc_state->shared_dpll; |
| |
| I915_STATE_WARN(pll->active_mask & pipe_mask, |
| "pll active mismatch (didn't expect pipe %c in active mask (0x%x))\n", |
| pipe_name(crtc->pipe), pll->active_mask); |
| I915_STATE_WARN(pll->state.pipe_mask & pipe_mask, |
| "pll enabled crtcs mismatch (found %x in enabled mask (0x%x))\n", |
| pipe_name(crtc->pipe), pll->state.pipe_mask); |
| } |
| } |
| |
| static void |
| verify_mpllb_state(struct intel_atomic_state *state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_mpllb_state mpllb_hw_state = { 0 }; |
| struct intel_mpllb_state *mpllb_sw_state = &new_crtc_state->mpllb_state; |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct intel_encoder *encoder; |
| |
| if (!IS_DG2(i915)) |
| return; |
| |
| if (!new_crtc_state->hw.active) |
| return; |
| |
| if (new_crtc_state->bigjoiner_slave) |
| return; |
| |
| encoder = intel_get_crtc_new_encoder(state, new_crtc_state); |
| intel_mpllb_readout_hw_state(encoder, &mpllb_hw_state); |
| |
| #define MPLLB_CHECK(name) do { \ |
| if (mpllb_sw_state->name != mpllb_hw_state.name) { \ |
| pipe_config_mismatch(false, crtc, "MPLLB:" __stringify(name), \ |
| "(expected 0x%08x, found 0x%08x)", \ |
| mpllb_sw_state->name, \ |
| mpllb_hw_state.name); \ |
| } \ |
| } while (0) |
| |
| MPLLB_CHECK(mpllb_cp); |
| MPLLB_CHECK(mpllb_div); |
| MPLLB_CHECK(mpllb_div2); |
| MPLLB_CHECK(mpllb_fracn1); |
| MPLLB_CHECK(mpllb_fracn2); |
| MPLLB_CHECK(mpllb_sscen); |
| MPLLB_CHECK(mpllb_sscstep); |
| |
| /* |
| * ref_control is handled by the hardware/firemware and never |
| * programmed by the software, but the proper values are supplied |
| * in the bspec for verification purposes. |
| */ |
| MPLLB_CHECK(ref_control); |
| |
| #undef MPLLB_CHECK |
| } |
| |
| static void |
| intel_modeset_verify_crtc(struct intel_crtc *crtc, |
| struct intel_atomic_state *state, |
| struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| if (!intel_crtc_needs_modeset(new_crtc_state) && !new_crtc_state->update_pipe) |
| return; |
| |
| verify_wm_state(crtc, new_crtc_state); |
| verify_connector_state(state, crtc); |
| verify_crtc_state(crtc, old_crtc_state, new_crtc_state); |
| verify_shared_dpll_state(crtc, old_crtc_state, new_crtc_state); |
| verify_mpllb_state(state, new_crtc_state); |
| } |
| |
| static void |
| verify_disabled_dpll_state(struct drm_i915_private *dev_priv) |
| { |
| int i; |
| |
| for (i = 0; i < dev_priv->dpll.num_shared_dpll; i++) |
| verify_single_dpll_state(dev_priv, |
| &dev_priv->dpll.shared_dplls[i], |
| NULL, NULL); |
| } |
| |
| static void |
| intel_modeset_verify_disabled(struct drm_i915_private *dev_priv, |
| struct intel_atomic_state *state) |
| { |
| verify_encoder_state(dev_priv, state); |
| verify_connector_state(state, NULL); |
| verify_disabled_dpll_state(dev_priv); |
| } |
| |
| int intel_modeset_all_pipes(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| |
| /* |
| * Add all pipes to the state, and force |
| * a modeset on all the active ones. |
| */ |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (!crtc_state->hw.active || |
| drm_atomic_crtc_needs_modeset(&crtc_state->uapi)) |
| continue; |
| |
| crtc_state->uapi.mode_changed = true; |
| |
| ret = drm_atomic_add_affected_connectors(&state->base, |
| &crtc->base); |
| if (ret) |
| return ret; |
| |
| ret = intel_atomic_add_affected_planes(state, crtc); |
| if (ret) |
| return ret; |
| |
| crtc_state->update_planes |= crtc_state->active_planes; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct drm_display_mode adjusted_mode = |
| crtc_state->hw.adjusted_mode; |
| |
| if (crtc_state->vrr.enable) { |
| adjusted_mode.crtc_vtotal = crtc_state->vrr.vmax; |
| adjusted_mode.crtc_vblank_end = crtc_state->vrr.vmax; |
| adjusted_mode.crtc_vblank_start = intel_vrr_vmin_vblank_start(crtc_state); |
| crtc->vmax_vblank_start = intel_vrr_vmax_vblank_start(crtc_state); |
| } |
| |
| drm_calc_timestamping_constants(&crtc->base, &adjusted_mode); |
| |
| crtc->mode_flags = crtc_state->mode_flags; |
| |
| /* |
| * The scanline counter increments at the leading edge of hsync. |
| * |
| * On most platforms it starts counting from vtotal-1 on the |
| * first active line. That means the scanline counter value is |
| * always one less than what we would expect. Ie. just after |
| * start of vblank, which also occurs at start of hsync (on the |
| * last active line), the scanline counter will read vblank_start-1. |
| * |
| * On gen2 the scanline counter starts counting from 1 instead |
| * of vtotal-1, so we have to subtract one (or rather add vtotal-1 |
| * to keep the value positive), instead of adding one. |
| * |
| * On HSW+ the behaviour of the scanline counter depends on the output |
| * type. For DP ports it behaves like most other platforms, but on HDMI |
| * there's an extra 1 line difference. So we need to add two instead of |
| * one to the value. |
| * |
| * On VLV/CHV DSI the scanline counter would appear to increment |
| * approx. 1/3 of a scanline before start of vblank. Unfortunately |
| * that means we can't tell whether we're in vblank or not while |
| * we're on that particular line. We must still set scanline_offset |
| * to 1 so that the vblank timestamps come out correct when we query |
| * the scanline counter from within the vblank interrupt handler. |
| * However if queried just before the start of vblank we'll get an |
| * answer that's slightly in the future. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2) { |
| int vtotal; |
| |
| vtotal = adjusted_mode.crtc_vtotal; |
| if (adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| vtotal /= 2; |
| |
| crtc->scanline_offset = vtotal - 1; |
| } else if (HAS_DDI(dev_priv) && |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { |
| crtc->scanline_offset = 2; |
| } else { |
| crtc->scanline_offset = 1; |
| } |
| } |
| |
| static void intel_modeset_clear_plls(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| if (!dev_priv->dpll_funcs) |
| return; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| intel_release_shared_dplls(state, crtc); |
| } |
| } |
| |
| /* |
| * This implements the workaround described in the "notes" section of the mode |
| * set sequence documentation. When going from no pipes or single pipe to |
| * multiple pipes, and planes are enabled after the pipe, we need to wait at |
| * least 2 vblanks on the first pipe before enabling planes on the second pipe. |
| */ |
| static int hsw_mode_set_planes_workaround(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| struct intel_crtc_state *first_crtc_state = NULL; |
| struct intel_crtc_state *other_crtc_state = NULL; |
| enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE; |
| int i; |
| |
| /* look at all crtc's that are going to be enabled in during modeset */ |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| if (!crtc_state->hw.active || |
| !intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| if (first_crtc_state) { |
| other_crtc_state = crtc_state; |
| break; |
| } else { |
| first_crtc_state = crtc_state; |
| first_pipe = crtc->pipe; |
| } |
| } |
| |
| /* No workaround needed? */ |
| if (!first_crtc_state) |
| return 0; |
| |
| /* w/a possibly needed, check how many crtc's are already enabled. */ |
| for_each_intel_crtc(state->base.dev, crtc) { |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| crtc_state->hsw_workaround_pipe = INVALID_PIPE; |
| |
| if (!crtc_state->hw.active || |
| intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| /* 2 or more enabled crtcs means no need for w/a */ |
| if (enabled_pipe != INVALID_PIPE) |
| return 0; |
| |
| enabled_pipe = crtc->pipe; |
| } |
| |
| if (enabled_pipe != INVALID_PIPE) |
| first_crtc_state->hsw_workaround_pipe = enabled_pipe; |
| else if (other_crtc_state) |
| other_crtc_state->hsw_workaround_pipe = first_pipe; |
| |
| return 0; |
| } |
| |
| u8 intel_calc_active_pipes(struct intel_atomic_state *state, |
| u8 active_pipes) |
| { |
| const struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| if (crtc_state->hw.active) |
| active_pipes |= BIT(crtc->pipe); |
| else |
| active_pipes &= ~BIT(crtc->pipe); |
| } |
| |
| return active_pipes; |
| } |
| |
| static int intel_modeset_checks(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| |
| state->modeset = true; |
| |
| if (IS_HASWELL(dev_priv)) |
| return hsw_mode_set_planes_workaround(state); |
| |
| return 0; |
| } |
| |
| static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true)) |
| return; |
| |
| new_crtc_state->uapi.mode_changed = false; |
| new_crtc_state->update_pipe = true; |
| } |
| |
| static void intel_crtc_copy_fastset(const struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| /* |
| * If we're not doing the full modeset we want to |
| * keep the current M/N values as they may be |
| * sufficiently different to the computed values |
| * to cause problems. |
| * |
| * FIXME: should really copy more fuzzy state here |
| */ |
| new_crtc_state->fdi_m_n = old_crtc_state->fdi_m_n; |
| new_crtc_state->dp_m_n = old_crtc_state->dp_m_n; |
| new_crtc_state->dp_m2_n2 = old_crtc_state->dp_m2_n2; |
| new_crtc_state->has_drrs = old_crtc_state->has_drrs; |
| } |
| |
| static int intel_crtc_add_planes_to_state(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| u8 plane_ids_mask) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { |
| struct intel_plane_state *plane_state; |
| |
| if ((plane_ids_mask & BIT(plane->id)) == 0) |
| continue; |
| |
| plane_state = intel_atomic_get_plane_state(state, plane); |
| if (IS_ERR(plane_state)) |
| return PTR_ERR(plane_state); |
| } |
| |
| return 0; |
| } |
| |
| int intel_atomic_add_affected_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| return intel_crtc_add_planes_to_state(state, crtc, |
| old_crtc_state->enabled_planes | |
| new_crtc_state->enabled_planes); |
| } |
| |
| static bool active_planes_affects_min_cdclk(struct drm_i915_private *dev_priv) |
| { |
| /* See {hsw,vlv,ivb}_plane_ratio() */ |
| return IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv) || |
| IS_CHERRYVIEW(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_IVYBRIDGE(dev_priv); |
| } |
| |
| static int intel_crtc_add_bigjoiner_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| struct intel_crtc *other) |
| { |
| const struct intel_plane_state *plane_state; |
| struct intel_plane *plane; |
| u8 plane_ids = 0; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe == crtc->pipe) |
| plane_ids |= BIT(plane->id); |
| } |
| |
| return intel_crtc_add_planes_to_state(state, other, plane_ids); |
| } |
| |
| static int intel_bigjoiner_add_affected_planes(struct intel_atomic_state *state) |
| { |
| const struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| int ret; |
| |
| if (!crtc_state->bigjoiner) |
| continue; |
| |
| ret = intel_crtc_add_bigjoiner_planes(state, crtc, |
| crtc_state->bigjoiner_linked_crtc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static bool bo_has_valid_encryption(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *i915 = to_i915(obj->base.dev); |
| |
| return intel_pxp_key_check(&i915->gt.pxp, obj, false) == 0; |
| } |
| |
| static bool pxp_is_borked(struct drm_i915_gem_object *obj) |
| { |
| return i915_gem_object_is_protected(obj) && !bo_has_valid_encryption(obj); |
| } |
| |
| static int intel_atomic_check_planes(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct intel_plane_state *plane_state; |
| struct intel_plane *plane; |
| struct intel_plane_state *new_plane_state; |
| struct intel_plane_state *old_plane_state; |
| struct intel_crtc *crtc; |
| const struct drm_framebuffer *fb; |
| int i, ret; |
| |
| ret = icl_add_linked_planes(state); |
| if (ret) |
| return ret; |
| |
| ret = intel_bigjoiner_add_affected_planes(state); |
| if (ret) |
| return ret; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| ret = intel_plane_atomic_check(state, plane); |
| if (ret) { |
| drm_dbg_atomic(&dev_priv->drm, |
| "[PLANE:%d:%s] atomic driver check failed\n", |
| plane->base.base.id, plane->base.name); |
| return ret; |
| } |
| } |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| u8 old_active_planes, new_active_planes; |
| |
| ret = icl_check_nv12_planes(new_crtc_state); |
| if (ret) |
| return ret; |
| |
| /* |
| * On some platforms the number of active planes affects |
| * the planes' minimum cdclk calculation. Add such planes |
| * to the state before we compute the minimum cdclk. |
| */ |
| if (!active_planes_affects_min_cdclk(dev_priv)) |
| continue; |
| |
| old_active_planes = old_crtc_state->active_planes & ~BIT(PLANE_CURSOR); |
| new_active_planes = new_crtc_state->active_planes & ~BIT(PLANE_CURSOR); |
| |
| if (hweight8(old_active_planes) == hweight8(new_active_planes)) |
| continue; |
| |
| ret = intel_crtc_add_planes_to_state(state, crtc, new_active_planes); |
| if (ret) |
| return ret; |
| } |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| new_plane_state = intel_atomic_get_new_plane_state(state, plane); |
| old_plane_state = intel_atomic_get_old_plane_state(state, plane); |
| fb = new_plane_state->hw.fb; |
| if (fb) { |
| new_plane_state->decrypt = bo_has_valid_encryption(intel_fb_obj(fb)); |
| new_plane_state->force_black = pxp_is_borked(intel_fb_obj(fb)); |
| } else { |
| new_plane_state->decrypt = old_plane_state->decrypt; |
| new_plane_state->force_black = old_plane_state->force_black; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int intel_atomic_check_cdclk(struct intel_atomic_state *state, |
| bool *need_cdclk_calc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_cdclk_state *old_cdclk_state; |
| const struct intel_cdclk_state *new_cdclk_state; |
| struct intel_plane_state *plane_state; |
| struct intel_bw_state *new_bw_state; |
| struct intel_plane *plane; |
| int min_cdclk = 0; |
| enum pipe pipe; |
| int ret; |
| int i; |
| /* |
| * active_planes bitmask has been updated, and potentially |
| * affected planes are part of the state. We can now |
| * compute the minimum cdclk for each plane. |
| */ |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| ret = intel_plane_calc_min_cdclk(state, plane, need_cdclk_calc); |
| if (ret) |
| return ret; |
| } |
| |
| old_cdclk_state = intel_atomic_get_old_cdclk_state(state); |
| new_cdclk_state = intel_atomic_get_new_cdclk_state(state); |
| |
| if (new_cdclk_state && |
| old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk) |
| *need_cdclk_calc = true; |
| |
| ret = intel_cdclk_bw_calc_min_cdclk(state); |
| if (ret) |
| return ret; |
| |
| new_bw_state = intel_atomic_get_new_bw_state(state); |
| |
| if (!new_cdclk_state || !new_bw_state) |
| return 0; |
| |
| for_each_pipe(dev_priv, pipe) { |
| min_cdclk = max(new_cdclk_state->min_cdclk[pipe], min_cdclk); |
| |
| /* |
| * Currently do this change only if we need to increase |
| */ |
| if (new_bw_state->min_cdclk > min_cdclk) |
| *need_cdclk_calc = true; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_atomic_check_crtcs(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| int ret; |
| |
| ret = intel_crtc_atomic_check(state, crtc); |
| if (ret) { |
| drm_dbg_atomic(&i915->drm, |
| "[CRTC:%d:%s] atomic driver check failed\n", |
| crtc->base.base.id, crtc->base.name); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state, |
| u8 transcoders) |
| { |
| const struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->hw.enable && |
| transcoders & BIT(new_crtc_state->cpu_transcoder) && |
| intel_crtc_needs_modeset(new_crtc_state)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc_state *slave_crtc_state, *master_crtc_state; |
| struct intel_crtc *slave, *master; |
| |
| /* slave being enabled, is master is still claiming this crtc? */ |
| if (old_crtc_state->bigjoiner_slave) { |
| slave = crtc; |
| master = old_crtc_state->bigjoiner_linked_crtc; |
| master_crtc_state = intel_atomic_get_new_crtc_state(state, master); |
| if (!master_crtc_state || !intel_crtc_needs_modeset(master_crtc_state)) |
| goto claimed; |
| } |
| |
| if (!new_crtc_state->bigjoiner) |
| return 0; |
| |
| slave = intel_dsc_get_bigjoiner_secondary(crtc); |
| if (!slave) { |
| DRM_DEBUG_KMS("[CRTC:%d:%s] Big joiner configuration requires " |
| "CRTC + 1 to be used, doesn't exist\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| new_crtc_state->bigjoiner_linked_crtc = slave; |
| slave_crtc_state = intel_atomic_get_crtc_state(&state->base, slave); |
| master = crtc; |
| if (IS_ERR(slave_crtc_state)) |
| return PTR_ERR(slave_crtc_state); |
| |
| /* master being enabled, slave was already configured? */ |
| if (slave_crtc_state->uapi.enable) |
| goto claimed; |
| |
| DRM_DEBUG_KMS("[CRTC:%d:%s] Used as slave for big joiner\n", |
| slave->base.base.id, slave->base.name); |
| |
| return copy_bigjoiner_crtc_state(slave_crtc_state, new_crtc_state); |
| |
| claimed: |
| DRM_DEBUG_KMS("[CRTC:%d:%s] Slave is enabled as normal CRTC, but " |
| "[CRTC:%d:%s] claiming this CRTC for bigjoiner.\n", |
| slave->base.base.id, slave->base.name, |
| master->base.base.id, master->base.name); |
| return -EINVAL; |
| } |
| |
| static void kill_bigjoiner_slave(struct intel_atomic_state *state, |
| struct intel_crtc_state *master_crtc_state) |
| { |
| struct intel_crtc_state *slave_crtc_state = |
| intel_atomic_get_new_crtc_state(state, master_crtc_state->bigjoiner_linked_crtc); |
| |
| slave_crtc_state->bigjoiner = master_crtc_state->bigjoiner = false; |
| slave_crtc_state->bigjoiner_slave = master_crtc_state->bigjoiner_slave = false; |
| slave_crtc_state->bigjoiner_linked_crtc = master_crtc_state->bigjoiner_linked_crtc = NULL; |
| intel_crtc_copy_uapi_to_hw_state(state, slave_crtc_state); |
| } |
| |
| /** |
| * DOC: asynchronous flip implementation |
| * |
| * Asynchronous page flip is the implementation for the DRM_MODE_PAGE_FLIP_ASYNC |
| * flag. Currently async flip is only supported via the drmModePageFlip IOCTL. |
| * Correspondingly, support is currently added for primary plane only. |
| * |
| * Async flip can only change the plane surface address, so anything else |
| * changing is rejected from the intel_atomic_check_async() function. |
| * Once this check is cleared, flip done interrupt is enabled using |
| * the intel_crtc_enable_flip_done() function. |
| * |
| * As soon as the surface address register is written, flip done interrupt is |
| * generated and the requested events are sent to the usersapce in the interrupt |
| * handler itself. The timestamp and sequence sent during the flip done event |
| * correspond to the last vblank and have no relation to the actual time when |
| * the flip done event was sent. |
| */ |
| static int intel_atomic_check_async(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| const struct intel_plane_state *new_plane_state, *old_plane_state; |
| struct intel_crtc *crtc; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (intel_crtc_needs_modeset(new_crtc_state)) { |
| drm_dbg_kms(&i915->drm, "Modeset Required. Async flip not supported\n"); |
| return -EINVAL; |
| } |
| |
| if (!new_crtc_state->hw.active) { |
| drm_dbg_kms(&i915->drm, "CRTC inactive\n"); |
| return -EINVAL; |
| } |
| if (old_crtc_state->active_planes != new_crtc_state->active_planes) { |
| drm_dbg_kms(&i915->drm, |
| "Active planes cannot be changed during async flip\n"); |
| return -EINVAL; |
| } |
| } |
| |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| /* |
| * TODO: Async flip is only supported through the page flip IOCTL |
| * as of now. So support currently added for primary plane only. |
| * Support for other planes on platforms on which supports |
| * this(vlv/chv and icl+) should be added when async flip is |
| * enabled in the atomic IOCTL path. |
| */ |
| if (!plane->async_flip) |
| return -EINVAL; |
| |
| /* |
| * FIXME: This check is kept generic for all platforms. |
| * Need to verify this for all gen9 platforms to enable |
| * this selectively if required. |
| */ |
| switch (new_plane_state->hw.fb->modifier) { |
| case I915_FORMAT_MOD_X_TILED: |
| case I915_FORMAT_MOD_Y_TILED: |
| case I915_FORMAT_MOD_Yf_TILED: |
| break; |
| default: |
| drm_dbg_kms(&i915->drm, |
| "Linear memory/CCS does not support async flips\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->view.color_plane[0].stride != |
| new_plane_state->view.color_plane[0].stride) { |
| drm_dbg_kms(&i915->drm, "Stride cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.fb->modifier != |
| new_plane_state->hw.fb->modifier) { |
| drm_dbg_kms(&i915->drm, |
| "Framebuffer modifiers cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.fb->format != |
| new_plane_state->hw.fb->format) { |
| drm_dbg_kms(&i915->drm, |
| "Framebuffer format cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.rotation != |
| new_plane_state->hw.rotation) { |
| drm_dbg_kms(&i915->drm, "Rotation cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (!drm_rect_equals(&old_plane_state->uapi.src, &new_plane_state->uapi.src) || |
| !drm_rect_equals(&old_plane_state->uapi.dst, &new_plane_state->uapi.dst)) { |
| drm_dbg_kms(&i915->drm, |
| "Plane size/co-ordinates cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.alpha != new_plane_state->hw.alpha) { |
| drm_dbg_kms(&i915->drm, "Alpha value cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.pixel_blend_mode != |
| new_plane_state->hw.pixel_blend_mode) { |
| drm_dbg_kms(&i915->drm, |
| "Pixel blend mode cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.color_encoding != new_plane_state->hw.color_encoding) { |
| drm_dbg_kms(&i915->drm, |
| "Color encoding cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.color_range != new_plane_state->hw.color_range) { |
| drm_dbg_kms(&i915->drm, "Color range cannot be changed in async flip\n"); |
| return -EINVAL; |
| } |
| |
| /* plane decryption is allow to change only in synchronous flips */ |
| if (old_plane_state->decrypt != new_plane_state->decrypt) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_bigjoiner_add_affected_crtcs(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| struct intel_crtc_state *linked_crtc_state; |
| struct intel_crtc *linked_crtc; |
| int ret; |
| |
| if (!crtc_state->bigjoiner) |
| continue; |
| |
| linked_crtc = crtc_state->bigjoiner_linked_crtc; |
| linked_crtc_state = intel_atomic_get_crtc_state(&state->base, linked_crtc); |
| if (IS_ERR(linked_crtc_state)) |
| return PTR_ERR(linked_crtc_state); |
| |
| if (!intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| linked_crtc_state->uapi.mode_changed = true; |
| |
| ret = drm_atomic_add_affected_connectors(&state->base, |
| &linked_crtc->base); |
| if (ret) |
| return ret; |
| |
| ret = intel_atomic_add_affected_planes(state, linked_crtc); |
| if (ret) |
| return ret; |
| } |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| /* Kill old bigjoiner link, we may re-establish afterwards */ |
| if (intel_crtc_needs_modeset(crtc_state) && |
| crtc_state->bigjoiner && !crtc_state->bigjoiner_slave) |
| kill_bigjoiner_slave(state, crtc_state); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * intel_atomic_check - validate state object |
| * @dev: drm device |
| * @_state: state to validate |
| */ |
| static int intel_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_atomic_state *state = to_intel_atomic_state(_state); |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct intel_crtc *crtc; |
| int ret, i; |
| bool any_ms = false; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (new_crtc_state->inherited != old_crtc_state->inherited) |
| new_crtc_state->uapi.mode_changed = true; |
| } |
| |
| intel_vrr_check_modeset(state); |
| |
| ret = drm_atomic_helper_check_modeset(dev, &state->base); |
| if (ret) |
| goto fail; |
| |
| ret = intel_bigjoiner_add_affected_crtcs(state); |
| if (ret) |
| goto fail; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) { |
| /* Light copy */ |
| intel_crtc_copy_uapi_to_hw_state_nomodeset(state, new_crtc_state); |
| |
| continue; |
| } |
| |
| if (!new_crtc_state->uapi.enable) { |
| if (!new_crtc_state->bigjoiner_slave) { |
| intel_crtc_copy_uapi_to_hw_state(state, new_crtc_state); |
| any_ms = true; |
| } |
| continue; |
| } |
| |
| ret = intel_crtc_prepare_cleared_state(state, new_crtc_state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_modeset_pipe_config(state, new_crtc_state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_atomic_check_bigjoiner(state, crtc, old_crtc_state, |
| new_crtc_state); |
| if (ret) |
| goto fail; |
| } |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| ret = intel_modeset_pipe_config_late(new_crtc_state); |
| if (ret) |
| goto fail; |
| |
| intel_crtc_check_fastset(old_crtc_state, new_crtc_state); |
| } |
| |
| /** |
| * Check if fastset is allowed by external dependencies like other |
| * pipes and transcoders. |
| * |
| * Right now it only forces a fullmodeset when the MST master |
| * transcoder did not changed but the pipe of the master transcoder |
| * needs a fullmodeset so all slaves also needs to do a fullmodeset or |
| * in case of port synced crtcs, if one of the synced crtcs |
| * needs a full modeset, all other synced crtcs should be |
| * forced a full modeset. |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!new_crtc_state->hw.enable || intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| if (intel_dp_mst_is_slave_trans(new_crtc_state)) { |
| enum transcoder master = new_crtc_state->mst_master_transcoder; |
| |
| if (intel_cpu_transcoders_need_modeset(state, BIT(master))) { |
| new_crtc_state->uapi.mode_changed = true; |
| new_crtc_state->update_pipe = false; |
| } |
| } |
| |
| if (is_trans_port_sync_mode(new_crtc_state)) { |
| u8 trans = new_crtc_state->sync_mode_slaves_mask; |
| |
| if (new_crtc_state->master_transcoder != INVALID_TRANSCODER) |
| trans |= BIT(new_crtc_state->master_transcoder); |
| |
| if (intel_cpu_transcoders_need_modeset(state, trans)) { |
| new_crtc_state->uapi.mode_changed = true; |
| new_crtc_state->update_pipe = false; |
| } |
| } |
| |
| if (new_crtc_state->bigjoiner) { |
| struct intel_crtc_state *linked_crtc_state = |
| intel_atomic_get_new_crtc_state(state, new_crtc_state->bigjoiner_linked_crtc); |
| |
| if (intel_crtc_needs_modeset(linked_crtc_state)) { |
| new_crtc_state->uapi.mode_changed = true; |
| new_crtc_state->update_pipe = false; |
| } |
| } |
| } |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (intel_crtc_needs_modeset(new_crtc_state)) { |
| any_ms = true; |
| continue; |
| } |
| |
| if (!new_crtc_state->update_pipe) |
| continue; |
| |
| intel_crtc_copy_fastset(old_crtc_state, new_crtc_state); |
| } |
| |
| if (any_ms && !check_digital_port_conflicts(state)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "rejecting conflicting digital port configuration\n"); |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| ret = drm_dp_mst_atomic_check(&state->base); |
| if (ret) |
| goto fail; |
| |
| ret = intel_atomic_check_planes(state); |
| if (ret) |
| goto fail; |
| |
| intel_fbc_choose_crtc(dev_priv, state); |
| ret = intel_compute_global_watermarks(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_bw_atomic_check(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_atomic_check_cdclk(state, &any_ms); |
| if (ret) |
| goto fail; |
| |
| if (intel_any_crtc_needs_modeset(state)) |
| any_ms = true; |
| |
| if (any_ms) { |
| ret = intel_modeset_checks(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_modeset_calc_cdclk(state); |
| if (ret) |
| return ret; |
| |
| intel_modeset_clear_plls(state); |
| } |
| |
| ret = intel_atomic_check_crtcs(state); |
| if (ret) |
| goto fail; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (new_crtc_state->uapi.async_flip) { |
| ret = intel_atomic_check_async(state); |
| if (ret) |
| goto fail; |
| } |
| |
| if (!intel_crtc_needs_modeset(new_crtc_state) && |
| !new_crtc_state->update_pipe) |
| continue; |
| |
| intel_dump_pipe_config(new_crtc_state, state, |
| intel_crtc_needs_modeset(new_crtc_state) ? |
| "[modeset]" : "[fastset]"); |
| } |
| |
| return 0; |
| |
| fail: |
| if (ret == -EDEADLK) |
| return ret; |
| |
| /* |
| * FIXME would probably be nice to know which crtc specifically |
| * caused the failure, in cases where we can pinpoint it. |
| */ |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) |
| intel_dump_pipe_config(new_crtc_state, state, "[failed]"); |
| |
| return ret; |
| } |
| |
| static int intel_atomic_prepare_commit(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i, ret; |
| |
| ret = drm_atomic_helper_prepare_planes(state->base.dev, &state->base); |
| if (ret < 0) |
| return ret; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| bool mode_changed = intel_crtc_needs_modeset(crtc_state); |
| |
| if (mode_changed || crtc_state->update_pipe || |
| crtc_state->uapi.color_mgmt_changed) { |
| intel_dsb_prepare(crtc_state); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (DISPLAY_VER(dev_priv) != 2 || crtc_state->active_planes) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); |
| |
| if (crtc_state->has_pch_encoder) { |
| enum pipe pch_transcoder = |
| intel_crtc_pch_transcoder(crtc); |
| |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true); |
| } |
| } |
| |
| static void intel_pipe_fastset(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| /* |
| * Update pipe size and adjust fitter if needed: the reason for this is |
| * that in compute_mode_changes we check the native mode (not the pfit |
| * mode) to see if we can flip rather than do a full mode set. In the |
| * fastboot case, we'll flip, but if we don't update the pipesrc and |
| * pfit state, we'll end up with a big fb scanned out into the wrong |
| * sized surface. |
| */ |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| /* on skylake this is done by detaching scalers */ |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| if (new_crtc_state->pch_pfit.enabled) |
| skl_pfit_enable(new_crtc_state); |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| if (new_crtc_state->pch_pfit.enabled) |
| ilk_pfit_enable(new_crtc_state); |
| else if (old_crtc_state->pch_pfit.enabled) |
| ilk_pfit_disable(old_crtc_state); |
| } |
| |
| /* |
| * The register is supposedly single buffered so perhaps |
| * not 100% correct to do this here. But SKL+ calculate |
| * this based on the adjust pixel rate so pfit changes do |
| * affect it and so it must be updated for fastsets. |
| * HSW/BDW only really need this here for fastboot, after |
| * that the value should not change without a full modeset. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) |
| hsw_set_linetime_wm(new_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| icl_set_pipe_chicken(new_crtc_state); |
| } |
| |
| static void commit_pipe_pre_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| bool modeset = intel_crtc_needs_modeset(new_crtc_state); |
| |
| /* |
| * During modesets pipe configuration was programmed as the |
| * CRTC was enabled. |
| */ |
| if (!modeset) { |
| if (new_crtc_state->uapi.color_mgmt_changed || |
| new_crtc_state->update_pipe) |
| intel_color_commit(new_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv)) |
| bdw_set_pipemisc(new_crtc_state); |
| |
| if (new_crtc_state->update_pipe) |
| intel_pipe_fastset(old_crtc_state, new_crtc_state); |
| } |
| |
| intel_psr2_program_trans_man_trk_ctl(new_crtc_state); |
| |
| intel_atomic_update_watermarks(state, crtc); |
| } |
| |
| static void commit_pipe_post_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| /* |
| * Disable the scaler(s) after the plane(s) so that we don't |
| * get a catastrophic underrun even if the two operations |
| * end up happening in two different frames. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 9 && |
| !intel_crtc_needs_modeset(new_crtc_state)) |
| skl_detach_scalers(new_crtc_state); |
| } |
| |
| static void intel_enable_crtc(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| return; |
| |
| intel_crtc_update_active_timings(new_crtc_state); |
| |
| dev_priv->display->crtc_enable(state, crtc); |
| |
| if (new_crtc_state->bigjoiner_slave) |
| return; |
| |
| /* vblanks work again, re-enable pipe CRC. */ |
| intel_crtc_enable_pipe_crc(crtc); |
| } |
| |
| static void intel_update_crtc(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| bool modeset = intel_crtc_needs_modeset(new_crtc_state); |
| |
| if (!modeset) { |
| if (new_crtc_state->preload_luts && |
| (new_crtc_state->uapi.color_mgmt_changed || |
| new_crtc_state->update_pipe)) |
| intel_color_load_luts(new_crtc_state); |
| |
| intel_pre_plane_update(state, crtc); |
| |
| if (new_crtc_state->update_pipe) |
| intel_encoders_update_pipe(state, crtc); |
| } |
| |
| intel_fbc_update(state, crtc); |
| |
| /* Perform vblank evasion around commit operation */ |
| intel_pipe_update_start(new_crtc_state); |
| |
| commit_pipe_pre_planes(state, crtc); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_update_planes_on_crtc(state, crtc); |
| else |
| i9xx_update_planes_on_crtc(state, crtc); |
| |
| commit_pipe_post_planes(state, crtc); |
| |
| intel_pipe_update_end(new_crtc_state); |
| |
| /* |
| * We usually enable FIFO underrun interrupts as part of the |
| * CRTC enable sequence during modesets. But when we inherit a |
| * valid pipe configuration from the BIOS we need to take care |
| * of enabling them on the CRTC's first fastset. |
| */ |
| if (new_crtc_state->update_pipe && !modeset && |
| old_crtc_state->inherited) |
| intel_crtc_arm_fifo_underrun(crtc, new_crtc_state); |
| } |
| |
| static void intel_old_crtc_state_disables(struct intel_atomic_state *state, |
| struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| |
| drm_WARN_ON(&dev_priv->drm, old_crtc_state->bigjoiner_slave); |
| |
| intel_encoders_pre_disable(state, crtc); |
| |
| intel_crtc_disable_planes(state, crtc); |
| |
| /* |
| * We still need special handling for disabling bigjoiner master |
| * and slaves since for slave we do not have encoder or plls |
| * so we dont need to disable those. |
| */ |
| if (old_crtc_state->bigjoiner) { |
| intel_crtc_disable_planes(state, |
| old_crtc_state->bigjoiner_linked_crtc); |
| old_crtc_state->bigjoiner_linked_crtc->active = false; |
| } |
| |
| /* |
| * We need to disable pipe CRC before disabling the pipe, |
| * or we race against vblank off. |
| */ |
| intel_crtc_disable_pipe_crc(crtc); |
| |
| dev_priv->display->crtc_disable(state, crtc); |
| crtc->active = false; |
| intel_fbc_disable(crtc); |
| intel_disable_shared_dpll(old_crtc_state); |
| |
| /* FIXME unify this for all platforms */ |
| if (!new_crtc_state->hw.active && |
| !HAS_GMCH(dev_priv)) |
| intel_initial_watermarks(state, crtc); |
| } |
| |
| static void intel_commit_modeset_disables(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *new_crtc_state, *old_crtc_state; |
| struct intel_crtc *crtc; |
| u32 handled = 0; |
| int i; |
| |
| /* Only disable port sync and MST slaves */ |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state) || old_crtc_state->bigjoiner) |
| continue; |
| |
| if (!old_crtc_state->hw.active) |
| continue; |
| |
| /* In case of Transcoder port Sync master slave CRTCs can be |
| * assigned in any order and we need to make sure that |
| * slave CRTCs are disabled first and then master CRTC since |
| * Slave vblanks are masked till Master Vblanks. |
| */ |
| if (!is_trans_port_sync_slave(old_crtc_state) && |
| !intel_dp_mst_is_slave_trans(old_crtc_state)) |
| continue; |
| |
| intel_pre_plane_update(state, crtc); |
| intel_old_crtc_state_disables(state, old_crtc_state, |
| new_crtc_state, crtc); |
| handled |= BIT(crtc->pipe); |
| } |
| |
| /* Disable everything else left on */ |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state) || |
| (handled & BIT(crtc->pipe)) || |
| old_crtc_state->bigjoiner_slave) |
| continue; |
| |
| intel_pre_plane_update(state, crtc); |
| if (old_crtc_state->bigjoiner) { |
| struct intel_crtc *slave = |
| old_crtc_state->bigjoiner_linked_crtc; |
| |
| intel_pre_plane_update(state, slave); |
| } |
| |
| if (old_crtc_state->hw.active) |
| intel_old_crtc_state_disables(state, old_crtc_state, |
| new_crtc_state, crtc); |
| } |
| } |
| |
| static void intel_commit_modeset_enables(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!new_crtc_state->hw.active) |
| continue; |
| |
| intel_enable_crtc(state, crtc); |
| intel_update_crtc(state, crtc); |
| } |
| } |
| |
| static void skl_commit_modeset_enables(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct skl_ddb_entry entries[I915_MAX_PIPES] = {}; |
| u8 update_pipes = 0, modeset_pipes = 0; |
| int i; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if (!new_crtc_state->hw.active) |
| continue; |
| |
| /* ignore allocations for crtc's that have been turned off. */ |
| if (!intel_crtc_needs_modeset(new_crtc_state)) { |
| entries[pipe] = old_crtc_state->wm.skl.ddb; |
| update_pipes |= BIT(pipe); |
| } else { |
| modeset_pipes |= BIT(pipe); |
| } |
| } |
| |
| /* |
| * Whenever the number of active pipes changes, we need to make sure we |
| * update the pipes in the right order so that their ddb allocations |
| * never overlap with each other between CRTC updates. Otherwise we'll |
| * cause pipe underruns and other bad stuff. |
| * |
| * So first lets enable all pipes that do not need a fullmodeset as |
| * those don't have any external dependency. |
| */ |
| while (update_pipes) { |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((update_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| if (skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb, |
| entries, I915_MAX_PIPES, pipe)) |
| continue; |
| |
| entries[pipe] = new_crtc_state->wm.skl.ddb; |
| update_pipes &= ~BIT(pipe); |
| |
| intel_update_crtc(state, crtc); |
| |
| /* |
| * If this is an already active pipe, it's DDB changed, |
| * and this isn't the last pipe that needs updating |
| * then we need to wait for a vblank to pass for the |
| * new ddb allocation to take effect. |
| */ |
| if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb, |
| &old_crtc_state->wm.skl.ddb) && |
| (update_pipes | modeset_pipes)) |
| intel_wait_for_vblank(dev_priv, pipe); |
| } |
| } |
| |
| update_pipes = modeset_pipes; |
| |
| /* |
| * Enable all pipes that needs a modeset and do not depends on other |
| * pipes |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((modeset_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| if (intel_dp_mst_is_slave_trans(new_crtc_state) || |
| is_trans_port_sync_master(new_crtc_state) || |
| (new_crtc_state->bigjoiner && !new_crtc_state->bigjoiner_slave)) |
| continue; |
| |
| modeset_pipes &= ~BIT(pipe); |
| |
| intel_enable_crtc(state, crtc); |
| } |
| |
| /* |
| * Then we enable all remaining pipes that depend on other |
| * pipes: MST slaves and port sync masters, big joiner master |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((modeset_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| modeset_pipes &= ~BIT(pipe); |
| |
| intel_enable_crtc(state, crtc); |
| } |
| |
| /* |
| * Finally we do the plane updates/etc. for all pipes that got enabled. |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((update_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| drm_WARN_ON(&dev_priv->drm, skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb, |
| entries, I915_MAX_PIPES, pipe)); |
| |
| entries[pipe] = new_crtc_state->wm.skl.ddb; |
| update_pipes &= ~BIT(pipe); |
| |
| intel_update_crtc(state, crtc); |
| } |
| |
| drm_WARN_ON(&dev_priv->drm, modeset_pipes); |
| drm_WARN_ON(&dev_priv->drm, update_pipes); |
| } |
| |
| static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv) |
| { |
| struct intel_atomic_state *state, *next; |
| struct llist_node *freed; |
| |
| freed = llist_del_all(&dev_priv->atomic_helper.free_list); |
| llist_for_each_entry_safe(state, next, freed, freed) |
| drm_atomic_state_put(&state->base); |
| } |
| |
| static void intel_atomic_helper_free_state_worker(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, typeof(*dev_priv), atomic_helper.free_work); |
| |
| intel_atomic_helper_free_state(dev_priv); |
| } |
| |
| static void intel_atomic_commit_fence_wait(struct intel_atomic_state *intel_state) |
| { |
| struct wait_queue_entry wait_fence, wait_reset; |
| struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev); |
| |
| init_wait_entry(&wait_fence, 0); |
| init_wait_entry(&wait_reset, 0); |
| for (;;) { |
| prepare_to_wait(&intel_state->commit_ready.wait, |
| &wait_fence, TASK_UNINTERRUPTIBLE); |
| prepare_to_wait(bit_waitqueue(&dev_priv->gt.reset.flags, |
| I915_RESET_MODESET), |
| &wait_reset, TASK_UNINTERRUPTIBLE); |
| |
| |
| if (i915_sw_fence_done(&intel_state->commit_ready) || |
| test_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags)) |
| break; |
| |
| schedule(); |
| } |
| finish_wait(&intel_state->commit_ready.wait, &wait_fence); |
| finish_wait(bit_waitqueue(&dev_priv->gt.reset.flags, |
| I915_RESET_MODESET), |
| &wait_reset); |
| } |
| |
| static void intel_cleanup_dsbs(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) |
| intel_dsb_cleanup(old_crtc_state); |
| } |
| |
| static void intel_atomic_cleanup_work(struct work_struct *work) |
| { |
| struct intel_atomic_state *state = |
| container_of(work, struct intel_atomic_state, base.commit_work); |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| |
| intel_cleanup_dsbs(state); |
| drm_atomic_helper_cleanup_planes(&i915->drm, &state->base); |
| drm_atomic_helper_commit_cleanup_done(&state->base); |
| drm_atomic_state_put(&state->base); |
| |
| intel_atomic_helper_free_state(i915); |
| } |
| |
| static void intel_atomic_prepare_plane_clear_colors(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_plane *plane; |
| struct intel_plane_state *plane_state; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| struct drm_framebuffer *fb = plane_state->hw.fb; |
| int ret; |
| |
| if (!fb || |
| fb->modifier != I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) |
| continue; |
| |
| /* |
| * The layout of the fast clear color value expected by HW |
| * (the DRM ABI requiring this value to be located in fb at offset 0 of plane#2): |
| * - 4 x 4 bytes per-channel value |
| * (in surface type specific float/int format provided by the fb user) |
| * - 8 bytes native color value used by the display |
| * (converted/written by GPU during a fast clear operation using the |
| * above per-channel values) |
| * |
| * The commit's FB prepare hook already ensured that FB obj is pinned and the |
| * caller made sure that the object is synced wrt. the related color clear value |
| * GPU write on it. |
| */ |
| ret = i915_gem_object_read_from_page(intel_fb_obj(fb), |
| fb->offsets[2] + 16, |
| &plane_state->ccval, |
| sizeof(plane_state->ccval)); |
| /* The above could only fail if the FB obj has an unexpected backing store type. */ |
| drm_WARN_ON(&i915->drm, ret); |
| } |
| } |
| |
| static void intel_atomic_commit_tail(struct intel_atomic_state *state) |
| { |
| struct drm_device *dev = state->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_crtc_state *new_crtc_state, *old_crtc_state; |
| struct intel_crtc *crtc; |
| u64 put_domains[I915_MAX_PIPES] = {}; |
| intel_wakeref_t wakeref = 0; |
| int i; |
| |
| intel_atomic_commit_fence_wait(state); |
| |
| drm_atomic_helper_wait_for_dependencies(&state->base); |
| |
| if (state->modeset) |
| wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET); |
| |
| intel_atomic_prepare_plane_clear_colors(state); |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (intel_crtc_needs_modeset(new_crtc_state) || |
| new_crtc_state->update_pipe) { |
| |
| put_domains[crtc->pipe] = |
| modeset_get_crtc_power_domains(new_crtc_state); |
| } |
| } |
| |
| intel_commit_modeset_disables(state); |
| |
| /* FIXME: Eventually get rid of our crtc->config pointer */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) |
| crtc->config = new_crtc_state; |
| |
| if (state->modeset) { |
| drm_atomic_helper_update_legacy_modeset_state(dev, &state->base); |
| |
| intel_set_cdclk_pre_plane_update(state); |
| |
| intel_modeset_verify_disabled(dev_priv, state); |
| } |
| |
| intel_sagv_pre_plane_update(state); |
| |
| /* Complete the events for pipes that have now been disabled */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| bool modeset = intel_crtc_needs_modeset(new_crtc_state); |
| |
| /* Complete events for now disable pipes here. */ |
| if (modeset && !new_crtc_state->hw.active && new_crtc_state->uapi.event) { |
| spin_lock_irq(&dev->event_lock); |
| drm_crtc_send_vblank_event(&crtc->base, |
| new_crtc_state->uapi.event); |
| spin_unlock_irq(&dev->event_lock); |
| |
| new_crtc_state->uapi.event = NULL; |
| } |
| } |
| |
| if (state->modeset) |
| intel_encoders_update_prepare(state); |
| |
| intel_dbuf_pre_plane_update(state); |
| intel_psr_pre_plane_update(state); |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->uapi.async_flip) |
| intel_crtc_enable_flip_done(state, crtc); |
| } |
| |
| /* Now enable the clocks, plane, pipe, and connectors that we set up. */ |
| dev_priv->display->commit_modeset_enables(state); |
| |
| if (state->modeset) { |
| intel_encoders_update_complete(state); |
| |
| intel_set_cdclk_post_plane_update(state); |
| } |
| |
| /* FIXME: We should call drm_atomic_helper_commit_hw_done() here |
| * already, but still need the state for the delayed optimization. To |
| * fix this: |
| * - wrap the optimization/post_plane_update stuff into a per-crtc work. |
| * - schedule that vblank worker _before_ calling hw_done |
| * - at the start of commit_tail, cancel it _synchrously |
| * - switch over to the vblank wait helper in the core after that since |
| * we don't need out special handling any more. |
| */ |
| drm_atomic_helper_wait_for_flip_done(dev, &state->base); |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->uapi.async_flip) |
| intel_crtc_disable_flip_done(state, crtc); |
| |
| if (new_crtc_state->hw.active && |
| !intel_crtc_needs_modeset(new_crtc_state) && |
| !new_crtc_state->preload_luts && |
| (new_crtc_state->uapi.color_mgmt_changed || |
| new_crtc_state->update_pipe)) |
| intel_color_load_luts(new_crtc_state); |
| } |
| |
| /* |
| * Now that the vblank has passed, we can go ahead and program the |
| * optimal watermarks on platforms that need two-step watermark |
| * programming. |
| * |
| * TODO: Move this (and other cleanup) to an async worker eventually. |
| */ |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| /* |
| * Gen2 reports pipe underruns whenever all planes are disabled. |
| * So re-enable underrun reporting after some planes get enabled. |
| * |
| * We do this before .optimize_watermarks() so that we have a |
| * chance of catching underruns with the intermediate watermarks |
| * vs. the new plane configuration. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2 && planes_enabling(old_crtc_state, new_crtc_state)) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); |
| |
| intel_optimize_watermarks(state, crtc); |
| } |
| |
| intel_dbuf_post_plane_update(state); |
| intel_psr_post_plane_update(state); |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| intel_post_plane_update(state, crtc); |
| |
| modeset_put_crtc_power_domains(crtc, put_domains[crtc->pipe]); |
| |
| intel_modeset_verify_crtc(crtc, state, old_crtc_state, new_crtc_state); |
| |
| /* |
| * DSB cleanup is done in cleanup_work aligning with framebuffer |
| * cleanup. So copy and reset the dsb structure to sync with |
| * commit_done and later do dsb cleanup in cleanup_work. |
| */ |
| old_crtc_state->dsb = fetch_and_zero(&new_crtc_state->dsb); |
| } |
| |
| /* Underruns don't always raise interrupts, so check manually */ |
| intel_check_cpu_fifo_underruns(dev_priv); |
| intel_check_pch_fifo_underruns(dev_priv); |
| |
| if (state->modeset) |
| intel_verify_planes(state); |
| |
| intel_sagv_post_plane_update(state); |
| |
| drm_atomic_helper_commit_hw_done(&state->base); |
| |
| if (state->modeset) { |
| /* As one of the primary mmio accessors, KMS has a high |
| * likelihood of triggering bugs in unclaimed access. After we |
| * finish modesetting, see if an error has been flagged, and if |
| * so enable debugging for the next modeset - and hope we catch |
| * the culprit. |
| */ |
| intel_uncore_arm_unclaimed_mmio_detection(&dev_priv->uncore); |
| intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET, wakeref); |
| } |
| intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); |
| |
| /* |
| * Defer the cleanup of the old state to a separate worker to not |
| * impede the current task (userspace for blocking modesets) that |
| * are executed inline. For out-of-line asynchronous modesets/flips, |
| * deferring to a new worker seems overkill, but we would place a |
| * schedule point (cond_resched()) here anyway to keep latencies |
| * down. |
| */ |
| INIT_WORK(&state->base.commit_work, intel_atomic_cleanup_work); |
| queue_work(system_highpri_wq, &state->base.commit_work); |
| } |
| |
| static void intel_atomic_commit_work(struct work_struct *work) |
| { |
| struct intel_atomic_state *state = |
| container_of(work, struct intel_atomic_state, base.commit_work); |
| |
| intel_atomic_commit_tail(state); |
| } |
| |
| static int |
| intel_atomic_commit_ready(struct i915_sw_fence *fence, |
| enum i915_sw_fence_notify notify) |
| { |
| struct intel_atomic_state *state = |
| container_of(fence, struct intel_atomic_state, commit_ready); |
| |
| switch (notify) { |
| case FENCE_COMPLETE: |
| /* we do blocking waits in the worker, nothing to do here */ |
| break; |
| case FENCE_FREE: |
| { |
| struct intel_atomic_helper *helper = |
| &to_i915(state->base.dev)->atomic_helper; |
| |
| if (llist_add(&state->freed, &helper->free_list)) |
| schedule_work(&helper->free_work); |
| break; |
| } |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| static void intel_atomic_track_fbs(struct intel_atomic_state *state) |
| { |
| struct intel_plane_state *old_plane_state, *new_plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) |
| intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->hw.fb), |
| to_intel_frontbuffer(new_plane_state->hw.fb), |
| plane->frontbuffer_bit); |
| } |
| |
| static int intel_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *_state, |
| bool nonblock) |
| { |
| struct intel_atomic_state *state = to_intel_atomic_state(_state); |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int ret = 0; |
| |
| state->wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); |
| |
| drm_atomic_state_get(&state->base); |
| i915_sw_fence_init(&state->commit_ready, |
| intel_atomic_commit_ready); |
| |
| /* |
| * The intel_legacy_cursor_update() fast path takes care |
| * of avoiding the vblank waits for simple cursor |
| * movement and flips. For cursor on/off and size changes, |
| * we want to perform the vblank waits so that watermark |
| * updates happen during the correct frames. Gen9+ have |
| * double buffered watermarks and so shouldn't need this. |
| * |
| * Unset state->legacy_cursor_update before the call to |
| * drm_atomic_helper_setup_commit() because otherwise |
| * drm_atomic_helper_wait_for_flip_done() is a noop and |
| * we get FIFO underruns because we didn't wait |
| * for vblank. |
| * |
| * FIXME doing watermarks and fb cleanup from a vblank worker |
| * (assuming we had any) would solve these problems. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9 && state->base.legacy_cursor_update) { |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) |
| if (new_crtc_state->wm.need_postvbl_update || |
| new_crtc_state->update_wm_post) |
| state->base.legacy_cursor_update = false; |
| } |
| |
| ret = intel_atomic_prepare_commit(state); |
| if (ret) { |
| drm_dbg_atomic(&dev_priv->drm, |
| "Preparing state failed with %i\n", ret); |
| i915_sw_fence_commit(&state->commit_ready); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); |
| return ret; |
| } |
| |
| ret = drm_atomic_helper_setup_commit(&state->base, nonblock); |
| if (!ret) |
| ret = drm_atomic_helper_swap_state(&state->base, true); |
| if (!ret) |
| intel_atomic_swap_global_state(state); |
| |
| if (ret) { |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| i915_sw_fence_commit(&state->commit_ready); |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) |
| intel_dsb_cleanup(new_crtc_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, &state->base); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); |
| return ret; |
| } |
| intel_shared_dpll_swap_state(state); |
| intel_atomic_track_fbs(state); |
| |
| drm_atomic_state_get(&state->base); |
| INIT_WORK(&state->base.commit_work, intel_atomic_commit_work); |
| |
| i915_sw_fence_commit(&state->commit_ready); |
| if (nonblock && state->modeset) { |
| queue_work(dev_priv->modeset_wq, &state->base.commit_work); |
| } else if (nonblock) { |
| queue_work(dev_priv->flip_wq, &state->base.commit_work); |
| } else { |
| if (state->modeset) |
| flush_workqueue(dev_priv->modeset_wq); |
| intel_atomic_commit_tail(state); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * intel_plane_destroy - destroy a plane |
| * @plane: plane to destroy |
| * |
| * Common destruction function for all types of planes (primary, cursor, |
| * sprite). |
| */ |
| void intel_plane_destroy(struct drm_plane *plane) |
| { |
| drm_plane_cleanup(plane); |
| kfree(to_intel_plane(plane)); |
| } |
| |
| static void intel_plane_possible_crtcs_init(struct drm_i915_private *dev_priv) |
| { |
| struct intel_plane *plane; |
| |
| for_each_intel_plane(&dev_priv->drm, plane) { |
| struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, |
| plane->pipe); |
| |
| plane->base.possible_crtcs = drm_crtc_mask(&crtc->base); |
| } |
| } |
| |
| |
| int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; |
| struct drm_crtc *drmmode_crtc; |
| struct intel_crtc *crtc; |
| |
| drmmode_crtc = drm_crtc_find(dev, file, pipe_from_crtc_id->crtc_id); |
| if (!drmmode_crtc) |
| return -ENOENT; |
| |
| crtc = to_intel_crtc(drmmode_crtc); |
| pipe_from_crtc_id->pipe = crtc->pipe; |
| |
| return 0; |
| } |
| |
| static u32 intel_encoder_possible_clones(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct intel_encoder *source_encoder; |
| u32 possible_clones = 0; |
| |
| for_each_intel_encoder(dev, source_encoder) { |
| if (encoders_cloneable(encoder, source_encoder)) |
| possible_clones |= drm_encoder_mask(&source_encoder->base); |
| } |
| |
| return possible_clones; |
| } |
| |
| static u32 intel_encoder_possible_crtcs(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct intel_crtc *crtc; |
| u32 possible_crtcs = 0; |
| |
| for_each_intel_crtc(dev, crtc) { |
| if (encoder->pipe_mask & BIT(crtc->pipe)) |
| possible_crtcs |= drm_crtc_mask(&crtc->base); |
| } |
| |
| return possible_crtcs; |
| } |
| |
| static bool ilk_has_edp_a(struct drm_i915_private *dev_priv) |
| { |
| if (!IS_MOBILE(dev_priv)) |
| return false; |
| |
| if ((intel_de_read(dev_priv, DP_A) & DP_DETECTED) == 0) |
| return false; |
| |
| if (IS_IRONLAKE(dev_priv) && (intel_de_read(dev_priv, FUSE_STRAP) & ILK_eDP_A_DISABLE)) |
| return false; |
| |
| return true; |
| } |
| |
| static bool intel_ddi_crt_present(struct drm_i915_private *dev_priv) |
| { |
| if (DISPLAY_VER(dev_priv) >= 9) |
| return false; |
| |
| if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv)) |
| return false; |
| |
| if (HAS_PCH_LPT_H(dev_priv) && |
| intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED) |
| return false; |
| |
| /* DDI E can't be used if DDI A requires 4 lanes */ |
| if (intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) |
| return false; |
| |
| if (!dev_priv->vbt.int_crt_support) |
| return false; |
| |
| return true; |
| } |
| |
| static void intel_setup_outputs(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| bool dpd_is_edp = false; |
| |
| intel_pps_unlock_regs_wa(dev_priv); |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| if (IS_DG2(dev_priv)) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_C); |
| intel_ddi_init(dev_priv, PORT_D_XELPD); |
| } else if (IS_ALDERLAKE_P(dev_priv)) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_TC1); |
| intel_ddi_init(dev_priv, PORT_TC2); |
| intel_ddi_init(dev_priv, PORT_TC3); |
| intel_ddi_init(dev_priv, PORT_TC4); |
| icl_dsi_init(dev_priv); |
| } else if (IS_ALDERLAKE_S(dev_priv)) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_TC1); |
| intel_ddi_init(dev_priv, PORT_TC2); |
| intel_ddi_init(dev_priv, PORT_TC3); |
| intel_ddi_init(dev_priv, PORT_TC4); |
| } else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_TC1); |
| intel_ddi_init(dev_priv, PORT_TC2); |
| } else if (DISPLAY_VER(dev_priv) >= 12) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_TC1); |
| intel_ddi_init(dev_priv, PORT_TC2); |
| intel_ddi_init(dev_priv, PORT_TC3); |
| intel_ddi_init(dev_priv, PORT_TC4); |
| intel_ddi_init(dev_priv, PORT_TC5); |
| intel_ddi_init(dev_priv, PORT_TC6); |
| icl_dsi_init(dev_priv); |
| } else if (IS_JSL_EHL(dev_priv)) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_C); |
| intel_ddi_init(dev_priv, PORT_D); |
| icl_dsi_init(dev_priv); |
| } else if (DISPLAY_VER(dev_priv) == 11) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_C); |
| intel_ddi_init(dev_priv, PORT_D); |
| intel_ddi_init(dev_priv, PORT_E); |
| intel_ddi_init(dev_priv, PORT_F); |
| icl_dsi_init(dev_priv); |
| } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_C); |
| vlv_dsi_init(dev_priv); |
| } else if (DISPLAY_VER(dev_priv) >= 9) { |
| intel_ddi_init(dev_priv, PORT_A); |
| intel_ddi_init(dev_priv, PORT_B); |
| intel_ddi_init(dev_priv, PORT_C); |
| intel_ddi_init(dev_priv, PORT_D); |
| intel_ddi_init(dev_priv, PORT_E); |
| } else if (HAS_DDI(dev_priv)) { |
| u32 found; |
| |
| if (intel_ddi_crt_present(dev_priv)) |
| intel_crt_init(dev_priv); |
| |
| /* Haswell uses DDI functions to detect digital outputs. */ |
| found = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED; |
| if (found) |
| intel_ddi_init(dev_priv, PORT_A); |
| |
| found = intel_de_read(dev_priv, SFUSE_STRAP); |
| if (found & SFUSE_STRAP_DDIB_DETECTED) |
| intel_ddi_init(dev_priv, PORT_B); |
| if (found & SFUSE_STRAP_DDIC_DETECTED) |
| intel_ddi_init(dev_priv, PORT_C); |
| if (found & SFUSE_STRAP_DDID_DETECTED) |
| intel_ddi_init(dev_priv, PORT_D); |
| if (found & SFUSE_STRAP_DDIF_DETECTED) |
| intel_ddi_init(dev_priv, PORT_F); |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| int found; |
| |
| /* |
| * intel_edp_init_connector() depends on this completing first, |
| * to prevent the registration of both eDP and LVDS and the |
| * incorrect sharing of the PPS. |
| */ |
| intel_lvds_init(dev_priv); |
| intel_crt_init(dev_priv); |
| |
| dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D); |
| |
| if (ilk_has_edp_a(dev_priv)) |
| g4x_dp_init(dev_priv, DP_A, PORT_A); |
| |
| if (intel_de_read(dev_priv, PCH_HDMIB) & SDVO_DETECTED) { |
| /* PCH SDVOB multiplex with HDMIB */ |
| found = intel_sdvo_init(dev_priv, PCH_SDVOB, PORT_B); |
| if (!found) |
| g4x_hdmi_init(dev_priv, PCH_HDMIB, PORT_B); |
| if (!found && (intel_de_read(dev_priv, PCH_DP_B) & DP_DETECTED)) |
| g4x_dp_init(dev_priv, PCH_DP_B, PORT_B); |
| } |
| |
| if (intel_de_read(dev_priv, PCH_HDMIC) & SDVO_DETECTED) |
| g4x_hdmi_init(dev_priv, PCH_HDMIC, PORT_C); |
| |
| if (!dpd_is_edp && intel_de_read(dev_priv, PCH_HDMID) & SDVO_DETECTED) |
| g4x_hdmi_init(dev_priv, PCH_HDMID, PORT_D); |
| |
| if (intel_de_read(dev_priv, PCH_DP_C) & DP_DETECTED) |
| g4x_dp_init(dev_priv, PCH_DP_C, PORT_C); |
| |
| if (intel_de_read(dev_priv, PCH_DP_D) & DP_DETECTED) |
| g4x_dp_init(dev_priv, PCH_DP_D, PORT_D); |
| } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { |
| bool has_edp, has_port; |
| |
| if (IS_VALLEYVIEW(dev_priv) && dev_priv->vbt.int_crt_support) |
| intel_crt_init(dev_priv); |
| |
| /* |
| * The DP_DETECTED bit is the latched state of the DDC |
| * SDA pin at boot. However since eDP doesn't require DDC |
| * (no way to plug in a DP->HDMI dongle) the DDC pins for |
| * eDP ports may have been muxed to an alternate function. |
| * Thus we can't rely on the DP_DETECTED bit alone to detect |
| * eDP ports. Consult the VBT as well as DP_DETECTED to |
| * detect eDP ports. |
| * |
| * Sadly the straps seem to be missing sometimes even for HDMI |
| * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap |
| * and VBT for the presence of the port. Additionally we can't |
| * trust the port type the VBT declares as we've seen at least |
| * HDMI ports that the VBT claim are DP or eDP. |
| */ |
| has_edp = intel_dp_is_port_edp(dev_priv, PORT_B); |
| has_port = intel_bios_is_port_present(dev_priv, PORT_B); |
| if (intel_de_read(dev_priv, VLV_DP_B) & DP_DETECTED || has_port) |
| has_edp &= g4x_dp_init(dev_priv, VLV_DP_B, PORT_B); |
| if ((intel_de_read(dev_priv, VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp) |
| g4x_hdmi_init(dev_priv, VLV_HDMIB, PORT_B); |
| |
| has_edp = intel_dp_is_port_edp(dev_priv, PORT_C); |
| has_port = intel_bios_is_port_present(dev_priv, PORT_C); |
| if (intel_de_read(dev_priv, VLV_DP_C) & DP_DETECTED || has_port) |
| has_edp &= g4x_dp_init(dev_priv, VLV_DP_C, PORT_C); |
| if ((intel_de_read(dev_priv, VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp) |
| g4x_hdmi_init(dev_priv, VLV_HDMIC, PORT_C); |
| |
| if (IS_CHERRYVIEW(dev_priv)) { |
| /* |
| * eDP not supported on port D, |
| * so no need to worry about it |
| */ |
| has_port = intel_bios_is_port_present(dev_priv, PORT_D); |
| if (intel_de_read(dev_priv, CHV_DP_D) & DP_DETECTED || has_port) |
| g4x_dp_init(dev_priv, CHV_DP_D, PORT_D); |
| if (intel_de_read(dev_priv, CHV_HDMID) & SDVO_DETECTED || has_port) |
| g4x_hdmi_init(dev_priv, CHV_HDMID, PORT_D); |
| } |
| |
| vlv_dsi_init(dev_priv); |
| } else if (IS_PINEVIEW(dev_priv)) { |
| intel_lvds_init(dev_priv); |
| intel_crt_init(dev_priv); |
| } else if (IS_DISPLAY_VER(dev_priv, 3, 4)) { |
| bool found = false; |
| |
| if (IS_MOBILE(dev_priv)) |
| intel_lvds_init(dev_priv); |
| |
| intel_crt_init(dev_priv); |
| |
| if (intel_de_read(dev_priv, GEN3_SDVOB) & SDVO_DETECTED) { |
| drm_dbg_kms(&dev_priv->drm, "probing SDVOB\n"); |
| found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B); |
| if (!found && IS_G4X(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "probing HDMI on SDVOB\n"); |
| g4x_hdmi_init(dev_priv, GEN4_HDMIB, PORT_B); |
| } |
| |
| if (!found && IS_G4X(dev_priv)) |
| g4x_dp_init(dev_priv, DP_B, PORT_B); |
| } |
| |
| /* Before G4X SDVOC doesn't have its own detect register */ |
| |
| if (intel_de_read(dev_priv, GEN3_SDVOB) & SDVO_DETECTED) { |
| drm_dbg_kms(&dev_priv->drm, "probing SDVOC\n"); |
| found = intel_sdvo_init(dev_priv, GEN3_SDVOC, PORT_C); |
| } |
| |
| if (!found && (intel_de_read(dev_priv, GEN3_SDVOC) & SDVO_DETECTED)) { |
| |
| if (IS_G4X(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "probing HDMI on SDVOC\n"); |
| g4x_hdmi_init(dev_priv, GEN4_HDMIC, PORT_C); |
| } |
| if (IS_G4X(dev_priv)) |
| g4x_dp_init(dev_priv, DP_C, PORT_C); |
| } |
| |
| if (IS_G4X(dev_priv) && (intel_de_read(dev_priv, DP_D) & DP_DETECTED)) |
| g4x_dp_init(dev_priv, DP_D, PORT_D); |
| |
| if (SUPPORTS_TV(dev_priv)) |
| intel_tv_init(dev_priv); |
| } else if (DISPLAY_VER(dev_priv) == 2) { |
| if (IS_I85X(dev_priv)) |
| intel_lvds_init(dev_priv); |
| |
| intel_crt_init(dev_priv); |
| intel_dvo_init(dev_priv); |
| } |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| encoder->base.possible_crtcs = |
| intel_encoder_possible_crtcs(encoder); |
| encoder->base.possible_clones = |
| intel_encoder_possible_clones(encoder); |
| } |
| |
| intel_init_pch_refclk(dev_priv); |
| |
| drm_helper_move_panel_connectors_to_head(&dev_priv->drm); |
| } |
| |
| static enum drm_mode_status |
| intel_mode_valid(struct drm_device *dev, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int hdisplay_max, htotal_max; |
| int vdisplay_max, vtotal_max; |
| |
| /* |
| * Can't reject DBLSCAN here because Xorg ddxen can add piles |
| * of DBLSCAN modes to the output's mode list when they detect |
| * the scaling mode property on the connector. And they don't |
| * ask the kernel to validate those modes in any way until |
| * modeset time at which point the client gets a protocol error. |
| * So in order to not upset those clients we silently ignore the |
| * DBLSCAN flag on such connectors. For other connectors we will |
| * reject modes with the DBLSCAN flag in encoder->compute_config(). |
| * And we always reject DBLSCAN modes in connector->mode_valid() |
| * as we never want such modes on the connector's mode list. |
| */ |
| |
| if (mode->vscan > 1) |
| return MODE_NO_VSCAN; |
| |
| if (mode->flags & DRM_MODE_FLAG_HSKEW) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->flags & (DRM_MODE_FLAG_CSYNC | |
| DRM_MODE_FLAG_NCSYNC | |
| DRM_MODE_FLAG_PCSYNC)) |
| return MODE_HSYNC; |
| |
| if (mode->flags & (DRM_MODE_FLAG_BCAST | |
| DRM_MODE_FLAG_PIXMUX | |
| DRM_MODE_FLAG_CLKDIV2)) |
| return MODE_BAD; |
| |
| /* Transcoder timing limits */ |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| hdisplay_max = 16384; |
| vdisplay_max = 8192; |
| htotal_max = 16384; |
| vtotal_max = 8192; |
| } else if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) { |
| hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */ |
| vdisplay_max = 4096; |
| htotal_max = 8192; |
| vtotal_max = 8192; |
| } else if (DISPLAY_VER(dev_priv) >= 3) { |
| hdisplay_max = 4096; |
| vdisplay_max = 4096; |
| htotal_max = 8192; |
| vtotal_max = 8192; |
| } else { |
| hdisplay_max = 2048; |
| vdisplay_max = 2048; |
| htotal_max = 4096; |
| vtotal_max = 4096; |
| } |
| |
| if (mode->hdisplay > hdisplay_max || |
| mode->hsync_start > htotal_max || |
| mode->hsync_end > htotal_max || |
| mode->htotal > htotal_max) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vdisplay > vdisplay_max || |
| mode->vsync_start > vtotal_max || |
| mode->vsync_end > vtotal_max || |
| mode->vtotal > vtotal_max) |
| return MODE_V_ILLEGAL; |
| |
| if (DISPLAY_VER(dev_priv) >= 5) { |
| if (mode->hdisplay < 64 || |
| mode->htotal - mode->hdisplay < 32) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vtotal - mode->vdisplay < 5) |
| return MODE_V_ILLEGAL; |
| } else { |
| if (mode->htotal - mode->hdisplay < 32) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vtotal - mode->vdisplay < 3) |
| return MODE_V_ILLEGAL; |
| } |
| |
| /* |
| * Cantiga+ cannot handle modes with a hsync front porch of 0. |
| * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw. |
| */ |
| if ((DISPLAY_VER(dev_priv) > 4 || IS_G4X(dev_priv)) && |
| mode->hsync_start == mode->hdisplay) |
| return MODE_H_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| enum drm_mode_status |
| intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv, |
| const struct drm_display_mode *mode, |
| bool bigjoiner) |
| { |
| int plane_width_max, plane_height_max; |
| |
| /* |
| * intel_mode_valid() should be |
| * sufficient on older platforms. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9) |
| return MODE_OK; |
| |
| /* |
| * Most people will probably want a fullscreen |
| * plane so let's not advertize modes that are |
| * too big for that. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| plane_width_max = 5120 << bigjoiner; |
| plane_height_max = 4320; |
| } else { |
| plane_width_max = 5120; |
| plane_height_max = 4096; |
| } |
| |
| if (mode->hdisplay > plane_width_max) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vdisplay > plane_height_max) |
| return MODE_V_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| static const struct drm_mode_config_funcs intel_mode_funcs = { |
| .fb_create = intel_user_framebuffer_create, |
| .get_format_info = intel_get_format_info, |
| .output_poll_changed = intel_fbdev_output_poll_changed, |
| .mode_valid = intel_mode_valid, |
| .atomic_check = intel_atomic_check, |
| .atomic_commit = intel_atomic_commit, |
| .atomic_state_alloc = intel_atomic_state_alloc, |
| .atomic_state_clear = intel_atomic_state_clear, |
| .atomic_state_free = intel_atomic_state_free, |
| }; |
| |
| static const struct drm_i915_display_funcs skl_display_funcs = { |
| .get_pipe_config = hsw_get_pipe_config, |
| .crtc_enable = hsw_crtc_enable, |
| .crtc_disable = hsw_crtc_disable, |
| .commit_modeset_enables = skl_commit_modeset_enables, |
| .get_initial_plane_config = skl_get_initial_plane_config, |
| }; |
| |
| static const struct drm_i915_display_funcs ddi_display_funcs = { |
| .get_pipe_config = hsw_get_pipe_config, |
| .crtc_enable = hsw_crtc_enable, |
| .crtc_disable = hsw_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| }; |
| |
| static const struct drm_i915_display_funcs pch_split_display_funcs = { |
| .get_pipe_config = ilk_get_pipe_config, |
| .crtc_enable = ilk_crtc_enable, |
| .crtc_disable = ilk_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| }; |
| |
| static const struct drm_i915_display_funcs vlv_display_funcs = { |
| .get_pipe_config = i9xx_get_pipe_config, |
| .crtc_enable = valleyview_crtc_enable, |
| .crtc_disable = i9xx_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| }; |
| |
| static const struct drm_i915_display_funcs i9xx_display_funcs = { |
| .get_pipe_config = i9xx_get_pipe_config, |
| .crtc_enable = i9xx_crtc_enable, |
| .crtc_disable = i9xx_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| }; |
| |
| /** |
| * intel_init_display_hooks - initialize the display modesetting hooks |
| * @dev_priv: device private |
| */ |
| void intel_init_display_hooks(struct drm_i915_private *dev_priv) |
| { |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| intel_init_cdclk_hooks(dev_priv); |
| intel_init_audio_hooks(dev_priv); |
| |
| intel_dpll_init_clock_hook(dev_priv); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| dev_priv->display = &skl_display_funcs; |
| } else if (HAS_DDI(dev_priv)) { |
| dev_priv->display = &ddi_display_funcs; |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| dev_priv->display = &pch_split_display_funcs; |
| } else if (IS_CHERRYVIEW(dev_priv) || |
| IS_VALLEYVIEW(dev_priv)) { |
| dev_priv->display = &vlv_display_funcs; |
| } else { |
| dev_priv->display = &i9xx_display_funcs; |
| } |
| |
| intel_fdi_init_hook(dev_priv); |
| } |
| |
| void intel_modeset_init_hw(struct drm_i915_private *i915) |
| { |
| struct intel_cdclk_state *cdclk_state; |
| |
| if (!HAS_DISPLAY(i915)) |
| return; |
| |
| cdclk_state = to_intel_cdclk_state(i915->cdclk.obj.state); |
| |
| intel_update_cdclk(i915); |
| intel_dump_cdclk_config(&i915->cdclk.hw, "Current CDCLK"); |
| cdclk_state->logical = cdclk_state->actual = i915->cdclk.hw; |
| } |
| |
| static int sanitize_watermarks_add_affected(struct drm_atomic_state *state) |
| { |
| struct drm_plane *plane; |
| struct intel_crtc *crtc; |
| |
| for_each_intel_crtc(state->dev, crtc) { |
| struct intel_crtc_state *crtc_state; |
| |
| crtc_state = intel_atomic_get_crtc_state(state, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (crtc_state->hw.active) { |
| /* |
| * Preserve the inherited flag to avoid |
| * taking the full modeset path. |
| */ |
| crtc_state->inherited = true; |
| } |
| } |
| |
| drm_for_each_plane(plane, state->dev) { |
| struct drm_plane_state *plane_state; |
| |
| plane_state = drm_atomic_get_plane_state(state, plane); |
| if (IS_ERR(plane_state)) |
| return PTR_ERR(plane_state); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Calculate what we think the watermarks should be for the state we've read |
| * out of the hardware and then immediately program those watermarks so that |
| * we ensure the hardware settings match our internal state. |
| * |
| * We can calculate what we think WM's should be by creating a duplicate of the |
| * current state (which was constructed during hardware readout) and running it |
| * through the atomic check code to calculate new watermark values in the |
| * state object. |
| */ |
| static void sanitize_watermarks(struct drm_i915_private *dev_priv) |
| { |
| struct drm_atomic_state *state; |
| struct intel_atomic_state *intel_state; |
| struct intel_crtc *crtc; |
| struct intel_crtc_state *crtc_state; |
| struct drm_modeset_acquire_ctx ctx; |
| int ret; |
| int i; |
| |
| /* Only supported on platforms that use atomic watermark design */ |
| if (!dev_priv->wm_disp->optimize_watermarks) |
| return; |
| |
| state = drm_atomic_state_alloc(&dev_priv->drm); |
| if (drm_WARN_ON(&dev_priv->drm, !state)) |
| return; |
| |
| intel_state = to_intel_atomic_state(state); |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| retry: |
| state->acquire_ctx = &ctx; |
| |
| /* |
| * Hardware readout is the only time we don't want to calculate |
| * intermediate watermarks (since we don't trust the current |
| * watermarks). |
| */ |
| if (!HAS_GMCH(dev_priv)) |
| intel_state->skip_intermediate_wm = true; |
| |
| ret = sanitize_watermarks_add_affected(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_atomic_check(&dev_priv->drm, state); |
| if (ret) |
| goto fail; |
| |
| /* Write calculated watermark values back */ |
| for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) { |
| crtc_state->wm.need_postvbl_update = true; |
| intel_optimize_watermarks(intel_state, crtc); |
| |
| to_intel_crtc_state(crtc->base.state)->wm = crtc_state->wm; |
| } |
| |
| fail: |
| if (ret == -EDEADLK) { |
| drm_atomic_state_clear(state); |
| drm_modeset_backoff(&ctx); |
| goto retry; |
| } |
| |
| /* |
| * If we fail here, it means that the hardware appears to be |
| * programmed in a way that shouldn't be possible, given our |
| * understanding of watermark requirements. This might mean a |
| * mistake in the hardware readout code or a mistake in the |
| * watermark calculations for a given platform. Raise a WARN |
| * so that this is noticeable. |
| * |
| * If this actually happens, we'll have to just leave the |
| * BIOS-programmed watermarks untouched and hope for the best. |
| */ |
| drm_WARN(&dev_priv->drm, ret, |
| "Could not determine valid watermarks for inherited state\n"); |
| |
| drm_atomic_state_put(state); |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| } |
| |
| static int intel_initial_commit(struct drm_device *dev) |
| { |
| struct drm_atomic_state *state = NULL; |
| struct drm_modeset_acquire_ctx ctx; |
| struct intel_crtc *crtc; |
| int ret = 0; |
| |
| state = drm_atomic_state_alloc(dev); |
| if (!state) |
| return -ENOMEM; |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| retry: |
| state->acquire_ctx = &ctx; |
| |
| for_each_intel_crtc(dev, crtc) { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_crtc_state(state, crtc); |
| |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| goto out; |
| } |
| |
| if (crtc_state->hw.active) { |
| struct intel_encoder *encoder; |
| |
| /* |
| * We've not yet detected sink capabilities |
| * (audio,infoframes,etc.) and thus we don't want to |
| * force a full state recomputation yet. We want that to |
| * happen only for the first real commit from userspace. |
| * So preserve the inherited flag for the time being. |
| */ |
| crtc_state->inherited = true; |
| |
| ret = drm_atomic_add_affected_planes(state, &crtc->base); |
| if (ret) |
| goto out; |
| |
| /* |
| * FIXME hack to force a LUT update to avoid the |
| * plane update forcing the pipe gamma on without |
| * having a proper LUT loaded. Remove once we |
| * have readout for pipe gamma enable. |
| */ |
| crtc_state->uapi.color_mgmt_changed = true; |
| |
| for_each_intel_encoder_mask(dev, encoder, |
| crtc_state->uapi.encoder_mask) { |
| if (encoder->initial_fastset_check && |
| !encoder->initial_fastset_check(encoder, crtc_state)) { |
| ret = drm_atomic_add_affected_connectors(state, |
| &crtc->base); |
| if (ret) |
| goto out; |
| } |
| } |
| } |
| } |
| |
| ret = drm_atomic_commit(state); |
| |
| out: |
| if (ret == -EDEADLK) { |
| drm_atomic_state_clear(state); |
| drm_modeset_backoff(&ctx); |
| goto retry; |
| } |
| |
| drm_atomic_state_put(state); |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| |
| return ret; |
| } |
| |
| static void intel_mode_config_init(struct drm_i915_private *i915) |
| { |
| struct drm_mode_config *mode_config = &i915->drm.mode_config; |
| |
| drm_mode_config_init(&i915->drm); |
| INIT_LIST_HEAD(&i915->global_obj_list); |
| |
| mode_config->min_width = 0; |
| mode_config->min_height = 0; |
| |
| mode_config->preferred_depth = 24; |
| mode_config->prefer_shadow = 1; |
| |
| mode_config->funcs = &intel_mode_funcs; |
| |
| mode_config->async_page_flip = HAS_ASYNC_FLIPS(i915); |
| |
| /* |
| * Maximum framebuffer dimensions, chosen to match |
| * the maximum render engine surface size on gen4+. |
| */ |
| if (DISPLAY_VER(i915) >= 7) { |
| mode_config->max_width = 16384; |
| mode_config->max_height = 16384; |
| } else if (DISPLAY_VER(i915) >= 4) { |
| mode_config->max_width = 8192; |
| mode_config->max_height = 8192; |
| } else if (DISPLAY_VER(i915) == 3) { |
| mode_config->max_width = 4096; |
| mode_config->max_height = 4096; |
| } else { |
| mode_config->max_width = 2048; |
| mode_config->max_height = 2048; |
| } |
| |
| if (IS_I845G(i915) || IS_I865G(i915)) { |
| mode_config->cursor_width = IS_I845G(i915) ? 64 : 512; |
| mode_config->cursor_height = 1023; |
| } else if (IS_I830(i915) || IS_I85X(i915) || |
| IS_I915G(i915) || IS_I915GM(i915)) { |
| mode_config->cursor_width = 64; |
| mode_config->cursor_height = 64; |
| } else { |
| mode_config->cursor_width = 256; |
| mode_config->cursor_height = 256; |
| } |
| } |
| |
| static void intel_mode_config_cleanup(struct drm_i915_private *i915) |
| { |
| intel_atomic_global_obj_cleanup(i915); |
| drm_mode_config_cleanup(&i915->drm); |
| } |
| |
| /* part #1: call before irq install */ |
| int intel_modeset_init_noirq(struct drm_i915_private *i915) |
| { |
| int ret; |
| |
| if (i915_inject_probe_failure(i915)) |
| return -ENODEV; |
| |
| if (HAS_DISPLAY(i915)) { |
| ret = drm_vblank_init(&i915->drm, |
| INTEL_NUM_PIPES(i915)); |
| if (ret) |
| return ret; |
| } |
| |
| intel_bios_init(i915); |
| |
| ret = intel_vga_register(i915); |
| if (ret) |
| goto cleanup_bios; |
| |
| /* FIXME: completely on the wrong abstraction layer */ |
| intel_power_domains_init_hw(i915, false); |
| |
| if (!HAS_DISPLAY(i915)) |
| return 0; |
| |
| intel_dmc_ucode_init(i915); |
| |
| i915->modeset_wq = alloc_ordered_workqueue("i915_modeset", 0); |
| i915->flip_wq = alloc_workqueue("i915_flip", WQ_HIGHPRI | |
| WQ_UNBOUND, WQ_UNBOUND_MAX_ACTIVE); |
| |
| i915->framestart_delay = 1; /* 1-4 */ |
| |
| i915->window2_delay = 0; /* No DSB so no window2 delay */ |
| |
| intel_mode_config_init(i915); |
| |
| ret = intel_cdclk_init(i915); |
| if (ret) |
| goto cleanup_vga_client_pw_domain_dmc; |
| |
| ret = intel_dbuf_init(i915); |
| if (ret) |
| goto cleanup_vga_client_pw_domain_dmc; |
| |
| ret = intel_bw_init(i915); |
| if (ret) |
| goto cleanup_vga_client_pw_domain_dmc; |
| |
| init_llist_head(&i915->atomic_helper.free_list); |
| INIT_WORK(&i915->atomic_helper.free_work, |
| intel_atomic_helper_free_state_worker); |
| |
| intel_init_quirks(i915); |
| |
| intel_fbc_init(i915); |
| |
| return 0; |
| |
| cleanup_vga_client_pw_domain_dmc: |
| intel_dmc_ucode_fini(i915); |
| intel_power_domains_driver_remove(i915); |
| intel_vga_unregister(i915); |
| cleanup_bios: |
| intel_bios_driver_remove(i915); |
| |
| return ret; |
| } |
| |
| /* part #2: call after irq install, but before gem init */ |
| int intel_modeset_init_nogem(struct drm_i915_private *i915) |
| { |
| struct drm_device *dev = &i915->drm; |
| enum pipe pipe; |
| struct intel_crtc *crtc; |
| int ret; |
| |
| if (!HAS_DISPLAY(i915)) |
| return 0; |
| |
| intel_init_pm(i915); |
| |
| intel_panel_sanitize_ssc(i915); |
| |
| intel_pps_setup(i915); |
| |
| intel_gmbus_setup(i915); |
| |
| drm_dbg_kms(&i915->drm, "%d display pipe%s available.\n", |
| INTEL_NUM_PIPES(i915), |
| INTEL_NUM_PIPES(i915) > 1 ? "s" : ""); |
| |
| for_each_pipe(i915, pipe) { |
| ret = intel_crtc_init(i915, pipe); |
| if (ret) { |
| intel_mode_config_cleanup(i915); |
| return ret; |
| } |
| } |
| |
| intel_plane_possible_crtcs_init(i915); |
| intel_shared_dpll_init(dev); |
| intel_fdi_pll_freq_update(i915); |
| |
| intel_update_czclk(i915); |
| intel_modeset_init_hw(i915); |
| intel_dpll_update_ref_clks(i915); |
| |
| intel_hdcp_component_init(i915); |
| |
| if (i915->max_cdclk_freq == 0) |
| intel_update_max_cdclk(i915); |
| |
| /* |
| * If the platform has HTI, we need to find out whether it has reserved |
| * any display resources before we create our display outputs. |
| */ |
| if (INTEL_INFO(i915)->display.has_hti) |
| i915->hti_state = intel_de_read(i915, HDPORT_STATE); |
| |
| /* Just disable it once at startup */ |
| intel_vga_disable(i915); |
| intel_setup_outputs(i915); |
| |
| drm_modeset_lock_all(dev); |
| intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx); |
| intel_acpi_assign_connector_fwnodes(i915); |
| drm_modeset_unlock_all(dev); |
| |
| for_each_intel_crtc(dev, crtc) { |
| if (!to_intel_crtc_state(crtc->base.state)->uapi.active) |
| continue; |
| intel_crtc_initial_plane_config(crtc); |
| } |
| |
| /* |
| * Make sure hardware watermarks really match the state we read out. |
| * Note that we need to do this after reconstructing the BIOS fb's |
| * since the watermark calculation done here will use pstate->fb. |
| */ |
| if (!HAS_GMCH(i915)) |
| sanitize_watermarks(i915); |
| |
| return 0; |
| } |
| |
| /* part #3: call after gem init */ |
| int intel_modeset_init(struct drm_i915_private *i915) |
| { |
| int ret; |
| |
| if (!HAS_DISPLAY(i915)) |
| return 0; |
| |
| /* |
| * Force all active planes to recompute their states. So that on |
| * mode_setcrtc after probe, all the intel_plane_state variables |
| * are already calculated and there is no assert_plane warnings |
| * during bootup. |
| */ |
| ret = intel_initial_commit(&i915->drm); |
| if (ret) |
| drm_dbg_kms(&i915->drm, "Initial modeset failed, %d\n", ret); |
| |
| intel_overlay_setup(i915); |
| |
| ret = intel_fbdev_init(&i915->drm); |
| if (ret) |
| return ret; |
| |
| /* Only enable hotplug handling once the fbdev is fully set up. */ |
| intel_hpd_init(i915); |
| intel_hpd_poll_disable(i915); |
| |
| intel_init_ipc(i915); |
| |
| return 0; |
| } |
| |
| void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| /* 640x480@60Hz, ~25175 kHz */ |
| struct dpll clock = { |
| .m1 = 18, |
| .m2 = 7, |
| .p1 = 13, |
| .p2 = 4, |
| .n = 2, |
| }; |
| u32 dpll, fp; |
| int i; |
| |
| drm_WARN_ON(&dev_priv->drm, |
| i9xx_calc_dpll_params(48000, &clock) != 25154); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "enabling pipe %c due to force quirk (vco=%d dot=%d)\n", |
| pipe_name(pipe), clock.vco, clock.dot); |
| |
| fp = i9xx_dpll_compute_fp(&clock); |
| dpll = DPLL_DVO_2X_MODE | |
| DPLL_VGA_MODE_DIS | |
| ((clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT) | |
| PLL_P2_DIVIDE_BY_4 | |
| PLL_REF_INPUT_DREFCLK | |
| DPLL_VCO_ENABLE; |
| |
| intel_de_write(dev_priv, FP0(pipe), fp); |
| intel_de_write(dev_priv, FP1(pipe), fp); |
| |
| intel_de_write(dev_priv, HTOTAL(pipe), (640 - 1) | ((800 - 1) << 16)); |
| intel_de_write(dev_priv, HBLANK(pipe), (640 - 1) | ((800 - 1) << 16)); |
| intel_de_write(dev_priv, HSYNC(pipe), (656 - 1) | ((752 - 1) << 16)); |
| intel_de_write(dev_priv, VTOTAL(pipe), (480 - 1) | ((525 - 1) << 16)); |
| intel_de_write(dev_priv, VBLANK(pipe), (480 - 1) | ((525 - 1) << 16)); |
| intel_de_write(dev_priv, VSYNC(pipe), (490 - 1) | ((492 - 1) << 16)); |
| intel_de_write(dev_priv, PIPESRC(pipe), ((640 - 1) << 16) | (480 - 1)); |
| |
| /* |
| * Apparently we need to have VGA mode enabled prior to changing |
| * the P1/P2 dividers. Otherwise the DPLL will keep using the old |
| * dividers, even though the register value does change. |
| */ |
| intel_de_write(dev_priv, DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS); |
| intel_de_write(dev_priv, DPLL(pipe), dpll); |
| |
| /* Wait for the clocks to stabilize. */ |
| intel_de_posting_read(dev_priv, DPLL(pipe)); |
| udelay(150); |
| |
| /* The pixel multiplier can only be updated once the |
| * DPLL is enabled and the clocks are stable. |
| * |
| * So write it again. |
| */ |
| intel_de_write(dev_priv, DPLL(pipe), dpll); |
| |
| /* We do this three times for luck */ |
| for (i = 0; i < 3 ; i++) { |
| intel_de_write(dev_priv, DPLL(pipe), dpll); |
| intel_de_posting_read(dev_priv, DPLL(pipe)); |
| udelay(150); /* wait for warmup */ |
| } |
| |
| intel_de_write(dev_priv, PIPECONF(pipe), |
| PIPECONF_ENABLE | PIPECONF_PROGRESSIVE); |
| intel_de_posting_read(dev_priv, PIPECONF(pipe)); |
| |
| intel_wait_for_pipe_scanline_moving(crtc); |
| } |
| |
| void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| |
| drm_dbg_kms(&dev_priv->drm, "disabling pipe %c due to force quirk\n", |
| pipe_name(pipe)); |
| |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, DSPCNTR(PLANE_A)) & |
| DISPLAY_PLANE_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, DSPCNTR(PLANE_B)) & |
| DISPLAY_PLANE_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, DSPCNTR(PLANE_C)) & |
| DISPLAY_PLANE_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, CURCNTR(PIPE_A)) & MCURSOR_MODE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, CURCNTR(PIPE_B)) & MCURSOR_MODE); |
| |
| intel_de_write(dev_priv, PIPECONF(pipe), 0); |
| intel_de_posting_read(dev_priv, PIPECONF(pipe)); |
| |
| intel_wait_for_pipe_scanline_stopped(crtc); |
| |
| intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS); |
| intel_de_posting_read(dev_priv, DPLL(pipe)); |
| } |
| |
| static void |
| intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv) |
| { |
| struct intel_crtc *crtc; |
| |
| if (DISPLAY_VER(dev_priv) >= 4) |
| return; |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_plane *plane = |
| to_intel_plane(crtc->base.primary); |
| struct intel_crtc *plane_crtc; |
| enum pipe pipe; |
| |
| if (!plane->get_hw_state(plane, &pipe)) |
| continue; |
| |
| if (pipe == crtc->pipe) |
| continue; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[PLANE:%d:%s] attached to the wrong pipe, disabling plane\n", |
| plane->base.base.id, plane->base.name); |
| |
| plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| intel_plane_disable_noatomic(plane_crtc, plane); |
| } |
| } |
| |
| static bool intel_crtc_has_encoders(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct intel_encoder *encoder; |
| |
| for_each_encoder_on_crtc(dev, &crtc->base, encoder) |
| return true; |
| |
| return false; |
| } |
| |
| static struct intel_connector *intel_encoder_find_connector(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct intel_connector *connector; |
| |
| for_each_connector_on_encoder(dev, &encoder->base, connector) |
| return connector; |
| |
| return NULL; |
| } |
| |
| static bool has_pch_trancoder(struct drm_i915_private *dev_priv, |
| enum pipe pch_transcoder) |
| { |
| return HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) || |
| (HAS_PCH_LPT_H(dev_priv) && pch_transcoder == PIPE_A); |
| } |
| |
| static void intel_sanitize_frame_start_delay(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) { |
| i915_reg_t reg = CHICKEN_TRANS(cpu_transcoder); |
| u32 val; |
| |
| if (transcoder_is_dsi(cpu_transcoder)) |
| return; |
| |
| val = intel_de_read(dev_priv, reg); |
| val &= ~HSW_FRAME_START_DELAY_MASK; |
| val |= HSW_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, reg, val); |
| } else { |
| i915_reg_t reg = PIPECONF(cpu_transcoder); |
| u32 val; |
| |
| val = intel_de_read(dev_priv, reg); |
| val &= ~PIPECONF_FRAME_START_DELAY_MASK; |
| val |= PIPECONF_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, reg, val); |
| } |
| |
| if (!crtc_state->has_pch_encoder) |
| return; |
| |
| if (HAS_PCH_IBX(dev_priv)) { |
| i915_reg_t reg = PCH_TRANSCONF(crtc->pipe); |
| u32 val; |
| |
| val = intel_de_read(dev_priv, reg); |
| val &= ~TRANS_FRAME_START_DELAY_MASK; |
| val |= TRANS_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, reg, val); |
| } else { |
| enum pipe pch_transcoder = intel_crtc_pch_transcoder(crtc); |
| i915_reg_t reg = TRANS_CHICKEN2(pch_transcoder); |
| u32 val; |
| |
| val = intel_de_read(dev_priv, reg); |
| val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK; |
| val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1); |
| intel_de_write(dev_priv, reg, val); |
| } |
| } |
| |
| static void intel_sanitize_crtc(struct intel_crtc *crtc, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| if (crtc_state->hw.active) { |
| struct intel_plane *plane; |
| |
| /* Clear any frame start delays used for debugging left by the BIOS */ |
| intel_sanitize_frame_start_delay(crtc_state); |
| |
| /* Disable everything but the primary plane */ |
| for_each_intel_plane_on_crtc(dev, crtc, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| if (plane_state->uapi.visible && |
| plane->base.type != DRM_PLANE_TYPE_PRIMARY) |
| intel_plane_disable_noatomic(crtc, plane); |
| } |
| |
| /* Disable any background color/etc. set by the BIOS */ |
| intel_color_commit(crtc_state); |
| } |
| |
| /* Adjust the state of the output pipe according to whether we |
| * have active connectors/encoders. */ |
| if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc) && |
| !crtc_state->bigjoiner_slave) |
| intel_crtc_disable_noatomic(crtc, ctx); |
| |
| if (crtc_state->hw.active || HAS_GMCH(dev_priv)) { |
| /* |
| * We start out with underrun reporting disabled to avoid races. |
| * For correct bookkeeping mark this on active crtcs. |
| * |
| * Also on gmch platforms we dont have any hardware bits to |
| * disable the underrun reporting. Which means we need to start |
| * out with underrun reporting disabled also on inactive pipes, |
| * since otherwise we'll complain about the garbage we read when |
| * e.g. coming up after runtime pm. |
| * |
| * No protection against concurrent access is required - at |
| * worst a fifo underrun happens which also sets this to false. |
| */ |
| crtc->cpu_fifo_underrun_disabled = true; |
| /* |
| * We track the PCH trancoder underrun reporting state |
| * within the crtc. With crtc for pipe A housing the underrun |
| * reporting state for PCH transcoder A, crtc for pipe B housing |
| * it for PCH transcoder B, etc. LPT-H has only PCH transcoder A, |
| * and marking underrun reporting as disabled for the non-existing |
| * PCH transcoders B and C would prevent enabling the south |
| * error interrupt (see cpt_can_enable_serr_int()). |
| */ |
| if (has_pch_trancoder(dev_priv, crtc->pipe)) |
| crtc->pch_fifo_underrun_disabled = true; |
| } |
| } |
| |
| static bool has_bogus_dpll_config(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| /* |
| * Some SNB BIOSen (eg. ASUS K53SV) are known to misprogram |
| * the hardware when a high res displays plugged in. DPLL P |
| * divider is zero, and the pipe timings are bonkers. We'll |
| * try to disable everything in that case. |
| * |
| * FIXME would be nice to be able to sanitize this state |
| * without several WARNs, but for now let's take the easy |
| * road. |
| */ |
| return IS_SANDYBRIDGE(dev_priv) && |
| crtc_state->hw.active && |
| crtc_state->shared_dpll && |
| crtc_state->port_clock == 0; |
| } |
| |
| static void intel_sanitize_encoder(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_connector *connector; |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
| struct intel_crtc_state *crtc_state = crtc ? |
| to_intel_crtc_state(crtc->base.state) : NULL; |
| |
| /* We need to check both for a crtc link (meaning that the |
| * encoder is active and trying to read from a pipe) and the |
| * pipe itself being active. */ |
| bool has_active_crtc = crtc_state && |
| crtc_state->hw.active; |
| |
| if (crtc_state && has_bogus_dpll_config(crtc_state)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "BIOS has misprogrammed the hardware. Disabling pipe %c\n", |
| pipe_name(crtc->pipe)); |
| has_active_crtc = false; |
| } |
| |
| connector = intel_encoder_find_connector(encoder); |
| if (connector && !has_active_crtc) { |
| drm_dbg_kms(&dev_priv->drm, |
| "[ENCODER:%d:%s] has active connectors but no active pipe!\n", |
| encoder->base.base.id, |
| encoder->base.name); |
| |
| /* Connector is active, but has no active pipe. This is |
| * fallout from our resume register restoring. Disable |
| * the encoder manually again. */ |
| if (crtc_state) { |
| struct drm_encoder *best_encoder; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[ENCODER:%d:%s] manually disabled\n", |
| encoder->base.base.id, |
| encoder->base.name); |
| |
| /* avoid oopsing in case the hooks consult best_encoder */ |
| best_encoder = connector->base.state->best_encoder; |
| connector->base.state->best_encoder = &encoder->base; |
| |
| /* FIXME NULL atomic state passed! */ |
| if (encoder->disable) |
| encoder->disable(NULL, encoder, crtc_state, |
| connector->base.state); |
| if (encoder->post_disable) |
| encoder->post_disable(NULL, encoder, crtc_state, |
| connector->base.state); |
| |
| connector->base.state->best_encoder = best_encoder; |
| } |
| encoder->base.crtc = NULL; |
| |
| /* Inconsistent output/port/pipe state happens presumably due to |
| * a bug in one of the get_hw_state functions. Or someplace else |
| * in our code, like the register restore mess on resume. Clamp |
| * things to off as a safer default. */ |
| |
| connector->base.dpms = DRM_MODE_DPMS_OFF; |
| connector->base.encoder = NULL; |
| } |
| |
| /* notify opregion of the sanitized encoder state */ |
| intel_opregion_notify_encoder(encoder, connector && has_active_crtc); |
| |
| if (HAS_DDI(dev_priv)) |
| intel_ddi_sanitize_encoder_pll_mapping(encoder); |
| } |
| |
| /* FIXME read out full plane state for all planes */ |
| static void readout_plane_state(struct drm_i915_private *dev_priv) |
| { |
| struct intel_plane *plane; |
| struct intel_crtc *crtc; |
| |
| for_each_intel_plane(&dev_priv->drm, plane) { |
| struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| struct intel_crtc_state *crtc_state; |
| enum pipe pipe = PIPE_A; |
| bool visible; |
| |
| visible = plane->get_hw_state(plane, &pipe); |
| |
| crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| intel_set_plane_visible(crtc_state, plane_state, visible); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[PLANE:%d:%s] hw state readout: %s, pipe %c\n", |
| plane->base.base.id, plane->base.name, |
| enableddisabled(visible), pipe_name(pipe)); |
| } |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| fixup_plane_bitmasks(crtc_state); |
| } |
| } |
| |
| static void intel_modeset_readout_hw_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_cdclk_state *cdclk_state = |
| to_intel_cdclk_state(dev_priv->cdclk.obj.state); |
| struct intel_dbuf_state *dbuf_state = |
| to_intel_dbuf_state(dev_priv->dbuf.obj.state); |
| enum pipe pipe; |
| struct intel_crtc *crtc; |
| struct intel_encoder *encoder; |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| u8 active_pipes = 0; |
| |
| for_each_intel_crtc(dev, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| __drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi); |
| intel_crtc_free_hw_state(crtc_state); |
| intel_crtc_state_reset(crtc_state, crtc); |
| |
| intel_crtc_get_pipe_config(crtc_state); |
| |
| crtc_state->hw.enable = crtc_state->hw.active; |
| |
| crtc->base.enabled = crtc_state->hw.enable; |
| crtc->active = crtc_state->hw.active; |
| |
| if (crtc_state->hw.active) |
| active_pipes |= BIT(crtc->pipe); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[CRTC:%d:%s] hw state readout: %s\n", |
| crtc->base.base.id, crtc->base.name, |
| enableddisabled(crtc_state->hw.active)); |
| } |
| |
| cdclk_state->active_pipes = dbuf_state->active_pipes = active_pipes; |
| |
| readout_plane_state(dev_priv); |
| |
| for_each_intel_encoder(dev, encoder) { |
| struct intel_crtc_state *crtc_state = NULL; |
| |
| pipe = 0; |
| |
| if (encoder->get_hw_state(encoder, &pipe)) { |
| crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| encoder->base.crtc = &crtc->base; |
| intel_encoder_get_config(encoder, crtc_state); |
| |
| /* read out to slave crtc as well for bigjoiner */ |
| if (crtc_state->bigjoiner) { |
| /* encoder should read be linked to bigjoiner master */ |
| WARN_ON(crtc_state->bigjoiner_slave); |
| |
| crtc = crtc_state->bigjoiner_linked_crtc; |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| intel_encoder_get_config(encoder, crtc_state); |
| } |
| } else { |
| encoder->base.crtc = NULL; |
| } |
| |
| if (encoder->sync_state) |
| encoder->sync_state(encoder, crtc_state); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", |
| encoder->base.base.id, encoder->base.name, |
| enableddisabled(encoder->base.crtc), |
| pipe_name(pipe)); |
| } |
| |
| intel_dpll_readout_hw_state(dev_priv); |
| |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| if (connector->get_hw_state(connector)) { |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| connector->base.dpms = DRM_MODE_DPMS_ON; |
| |
| encoder = intel_attached_encoder(connector); |
| connector->base.encoder = &encoder->base; |
| |
| crtc = to_intel_crtc(encoder->base.crtc); |
| crtc_state = crtc ? to_intel_crtc_state(crtc->base.state) : NULL; |
| |
| if (crtc_state && crtc_state->hw.active) { |
| /* |
| * This has to be done during hardware readout |
| * because anything calling .crtc_disable may |
| * rely on the connector_mask being accurate. |
| */ |
| crtc_state->uapi.connector_mask |= |
| drm_connector_mask(&connector->base); |
| crtc_state->uapi.encoder_mask |= |
| drm_encoder_mask(&encoder->base); |
| } |
| } else { |
| connector->base.dpms = DRM_MODE_DPMS_OFF; |
| connector->base.encoder = NULL; |
| } |
| drm_dbg_kms(&dev_priv->drm, |
| "[CONNECTOR:%d:%s] hw state readout: %s\n", |
| connector->base.base.id, connector->base.name, |
| enableddisabled(connector->base.encoder)); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| for_each_intel_crtc(dev, crtc) { |
| struct intel_bw_state *bw_state = |
| to_intel_bw_state(dev_priv->bw_obj.state); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane *plane; |
| int min_cdclk = 0; |
| |
| if (crtc_state->bigjoiner_slave) |
| continue; |
| |
| if (crtc_state->hw.active) { |
| /* |
| * The initial mode needs to be set in order to keep |
| * the atomic core happy. It wants a valid mode if the |
| * crtc's enabled, so we do the above call. |
| * |
| * But we don't set all the derived state fully, hence |
| * set a flag to indicate that a full recalculation is |
| * needed on the next commit. |
| */ |
| crtc_state->inherited = true; |
| |
| intel_crtc_update_active_timings(crtc_state); |
| |
| intel_crtc_copy_hw_to_uapi_state(crtc_state); |
| } |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| /* |
| * FIXME don't have the fb yet, so can't |
| * use intel_plane_data_rate() :( |
| */ |
| if (plane_state->uapi.visible) |
| crtc_state->data_rate[plane->id] = |
| 4 * crtc_state->pixel_rate; |
| /* |
| * FIXME don't have the fb yet, so can't |
| * use plane->min_cdclk() :( |
| */ |
| if (plane_state->uapi.visible && plane->min_cdclk) { |
| if (crtc_state->double_wide || DISPLAY_VER(dev_priv) >= 10) |
| crtc_state->min_cdclk[plane->id] = |
| DIV_ROUND_UP(crtc_state->pixel_rate, 2); |
| else |
| crtc_state->min_cdclk[plane->id] = |
| crtc_state->pixel_rate; |
| } |
| drm_dbg_kms(&dev_priv->drm, |
| "[PLANE:%d:%s] min_cdclk %d kHz\n", |
| plane->base.base.id, plane->base.name, |
| crtc_state->min_cdclk[plane->id]); |
| } |
| |
| if (crtc_state->hw.active) { |
| min_cdclk = intel_crtc_compute_min_cdclk(crtc_state); |
| if (drm_WARN_ON(dev, min_cdclk < 0)) |
| min_cdclk = 0; |
| } |
| |
| cdclk_state->min_cdclk[crtc->pipe] = min_cdclk; |
| cdclk_state->min_voltage_level[crtc->pipe] = |
| crtc_state->min_voltage_level; |
| |
| intel_bw_crtc_update(bw_state, crtc_state); |
| |
| intel_pipe_config_sanity_check(dev_priv, crtc_state); |
| |
| /* discard our incomplete slave state, copy it from master */ |
| if (crtc_state->bigjoiner && crtc_state->hw.active) { |
| struct intel_crtc *slave = crtc_state->bigjoiner_linked_crtc; |
| struct intel_crtc_state *slave_crtc_state = |
| to_intel_crtc_state(slave->base.state); |
| |
| copy_bigjoiner_crtc_state(slave_crtc_state, crtc_state); |
| slave->base.mode = crtc->base.mode; |
| |
| cdclk_state->min_cdclk[slave->pipe] = min_cdclk; |
| cdclk_state->min_voltage_level[slave->pipe] = |
| crtc_state->min_voltage_level; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, slave, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| /* |
| * FIXME don't have the fb yet, so can't |
| * use intel_plane_data_rate() :( |
| */ |
| if (plane_state->uapi.visible) |
| crtc_state->data_rate[plane->id] = |
| 4 * crtc_state->pixel_rate; |
| else |
| crtc_state->data_rate[plane->id] = 0; |
| } |
| |
| intel_bw_crtc_update(bw_state, slave_crtc_state); |
| drm_calc_timestamping_constants(&slave->base, |
| &slave_crtc_state->hw.adjusted_mode); |
| } |
| } |
| } |
| |
| static void |
| get_encoder_power_domains(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| struct intel_crtc_state *crtc_state; |
| |
| if (!encoder->get_power_domains) |
| continue; |
| |
| /* |
| * MST-primary and inactive encoders don't have a crtc state |
| * and neither of these require any power domain references. |
| */ |
| if (!encoder->base.crtc) |
| continue; |
| |
| crtc_state = to_intel_crtc_state(encoder->base.crtc->state); |
| encoder->get_power_domains(encoder, crtc_state); |
| } |
| } |
| |
| static void intel_early_display_was(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * Display WA #1185 WaDisableDARBFClkGating:glk,icl,ehl,tgl |
| * Also known as Wa_14010480278. |
| */ |
| if (IS_DISPLAY_VER(dev_priv, 10, 12)) |
| intel_de_write(dev_priv, GEN9_CLKGATE_DIS_0, |
| intel_de_read(dev_priv, GEN9_CLKGATE_DIS_0) | DARBF_GATING_DIS); |
| |
| if (IS_HASWELL(dev_priv)) { |
| /* |
| * WaRsPkgCStateDisplayPMReq:hsw |
| * System hang if this isn't done before disabling all planes! |
| */ |
| intel_de_write(dev_priv, CHICKEN_PAR1_1, |
| intel_de_read(dev_priv, CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES); |
| } |
| |
| if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv) || IS_COMETLAKE(dev_priv)) { |
| /* Display WA #1142:kbl,cfl,cml */ |
| intel_de_rmw(dev_priv, CHICKEN_PAR1_1, |
| KBL_ARB_FILL_SPARE_22, KBL_ARB_FILL_SPARE_22); |
| intel_de_rmw(dev_priv, CHICKEN_MISC_2, |
| KBL_ARB_FILL_SPARE_13 | KBL_ARB_FILL_SPARE_14, |
| KBL_ARB_FILL_SPARE_14); |
| } |
| } |
| |
| static void ibx_sanitize_pch_hdmi_port(struct drm_i915_private *dev_priv, |
| enum port port, i915_reg_t hdmi_reg) |
| { |
| u32 val = intel_de_read(dev_priv, hdmi_reg); |
| |
| if (val & SDVO_ENABLE || |
| (val & SDVO_PIPE_SEL_MASK) == SDVO_PIPE_SEL(PIPE_A)) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "Sanitizing transcoder select for HDMI %c\n", |
| port_name(port)); |
| |
| val &= ~SDVO_PIPE_SEL_MASK; |
| val |= SDVO_PIPE_SEL(PIPE_A); |
| |
| intel_de_write(dev_priv, hdmi_reg, val); |
| } |
| |
| static void ibx_sanitize_pch_dp_port(struct drm_i915_private *dev_priv, |
| enum port port, i915_reg_t dp_reg) |
| { |
| u32 val = intel_de_read(dev_priv, dp_reg); |
| |
| if (val & DP_PORT_EN || |
| (val & DP_PIPE_SEL_MASK) == DP_PIPE_SEL(PIPE_A)) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "Sanitizing transcoder select for DP %c\n", |
| port_name(port)); |
| |
| val &= ~DP_PIPE_SEL_MASK; |
| val |= DP_PIPE_SEL(PIPE_A); |
| |
| intel_de_write(dev_priv, dp_reg, val); |
| } |
| |
| static void ibx_sanitize_pch_ports(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * The BIOS may select transcoder B on some of the PCH |
| * ports even it doesn't enable the port. This would trip |
| * assert_pch_dp_disabled() and assert_pch_hdmi_disabled(). |
| * Sanitize the transcoder select bits to prevent that. We |
| * assume that the BIOS never actually enabled the port, |
| * because if it did we'd actually have to toggle the port |
| * on and back off to make the transcoder A select stick |
| * (see. intel_dp_link_down(), intel_disable_hdmi(), |
| * intel_disable_sdvo()). |
| */ |
| ibx_sanitize_pch_dp_port(dev_priv, PORT_B, PCH_DP_B); |
| ibx_sanitize_pch_dp_port(dev_priv, PORT_C, PCH_DP_C); |
| ibx_sanitize_pch_dp_port(dev_priv, PORT_D, PCH_DP_D); |
| |
| /* PCH SDVOB multiplex with HDMIB */ |
| ibx_sanitize_pch_hdmi_port(dev_priv, PORT_B, PCH_HDMIB); |
| ibx_sanitize_pch_hdmi_port(dev_priv, PORT_C, PCH_HDMIC); |
| ibx_sanitize_pch_hdmi_port(dev_priv, PORT_D, PCH_HDMID); |
| } |
| |
| /* Scan out the current hw modeset state, |
| * and sanitizes it to the current state |
| */ |
| static void |
| intel_modeset_setup_hw_state(struct drm_device *dev, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_encoder *encoder; |
| struct intel_crtc *crtc; |
| intel_wakeref_t wakeref; |
| |
| wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); |
| |
| intel_early_display_was(dev_priv); |
| intel_modeset_readout_hw_state(dev); |
| |
| /* HW state is read out, now we need to sanitize this mess. */ |
| get_encoder_power_domains(dev_priv); |
| |
| if (HAS_PCH_IBX(dev_priv)) |
| ibx_sanitize_pch_ports(dev_priv); |
| |
| /* |
| * intel_sanitize_plane_mapping() may need to do vblank |
| * waits, so we need vblank interrupts restored beforehand. |
| */ |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| drm_crtc_vblank_reset(&crtc->base); |
| |
| if (crtc_state->hw.active) |
| intel_crtc_vblank_on(crtc_state); |
| } |
| |
| intel_sanitize_plane_mapping(dev_priv); |
| |
| for_each_intel_encoder(dev, encoder) |
| intel_sanitize_encoder(encoder); |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| intel_sanitize_crtc(crtc, ctx); |
| intel_dump_pipe_config(crtc_state, NULL, "[setup_hw_state]"); |
| } |
| |
| intel_modeset_update_connector_atomic_state(dev); |
| |
| intel_dpll_sanitize_state(dev_priv); |
| |
| if (IS_G4X(dev_priv)) { |
| g4x_wm_get_hw_state(dev_priv); |
| g4x_wm_sanitize(dev_priv); |
| } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { |
| vlv_wm_get_hw_state(dev_priv); |
| vlv_wm_sanitize(dev_priv); |
| } else if (DISPLAY_VER(dev_priv) >= 9) { |
| skl_wm_get_hw_state(dev_priv); |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| ilk_wm_get_hw_state(dev_priv); |
| } |
| |
| for_each_intel_crtc(dev, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| u64 put_domains; |
| |
| put_domains = modeset_get_crtc_power_domains(crtc_state); |
| if (drm_WARN_ON(dev, put_domains)) |
| modeset_put_crtc_power_domains(crtc, put_domains); |
| } |
| |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT, wakeref); |
| } |
| |
| void intel_display_resume(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct drm_atomic_state *state = dev_priv->modeset_restore_state; |
| struct drm_modeset_acquire_ctx ctx; |
| int ret; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| dev_priv->modeset_restore_state = NULL; |
| if (state) |
| state->acquire_ctx = &ctx; |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| while (1) { |
| ret = drm_modeset_lock_all_ctx(dev, &ctx); |
| if (ret != -EDEADLK) |
| break; |
| |
| drm_modeset_backoff(&ctx); |
| } |
| |
| if (!ret) |
| ret = __intel_display_resume(dev, state, &ctx); |
| |
| intel_enable_ipc(dev_priv); |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| |
| if (ret) |
| drm_err(&dev_priv->drm, |
| "Restoring old state failed with %i\n", ret); |
| if (state) |
| drm_atomic_state_put(state); |
| } |
| |
| static void intel_hpd_poll_fini(struct drm_i915_private *i915) |
| { |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| |
| /* Kill all the work that may have been queued by hpd. */ |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| if (connector->modeset_retry_work.func) |
| cancel_work_sync(&connector->modeset_retry_work); |
| if (connector->hdcp.shim) { |
| cancel_delayed_work_sync(&connector->hdcp.check_work); |
| cancel_work_sync(&connector->hdcp.prop_work); |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| } |
| |
| /* part #1: call before irq uninstall */ |
| void intel_modeset_driver_remove(struct drm_i915_private *i915) |
| { |
| if (!HAS_DISPLAY(i915)) |
| return; |
| |
| flush_workqueue(i915->flip_wq); |
| flush_workqueue(i915->modeset_wq); |
| |
| flush_work(&i915->atomic_helper.free_work); |
| drm_WARN_ON(&i915->drm, !llist_empty(&i915->atomic_helper.free_list)); |
| } |
| |
| /* part #2: call after irq uninstall */ |
| void intel_modeset_driver_remove_noirq(struct drm_i915_private *i915) |
| { |
| if (!HAS_DISPLAY(i915)) |
| return; |
| |
| /* |
| * Due to the hpd irq storm handling the hotplug work can re-arm the |
| * poll handlers. Hence disable polling after hpd handling is shut down. |
| */ |
| intel_hpd_poll_fini(i915); |
| |
| /* |
| * MST topology needs to be suspended so we don't have any calls to |
| * fbdev after it's finalized. MST will be destroyed later as part of |
| * drm_mode_config_cleanup() |
| */ |
| intel_dp_mst_suspend(i915); |
| |
| /* poll work can call into fbdev, hence clean that up afterwards */ |
| intel_fbdev_fini(i915); |
| |
| intel_unregister_dsm_handler(); |
| |
| intel_fbc_global_disable(i915); |
| |
| /* flush any delayed tasks or pending work */ |
| flush_scheduled_work(); |
| |
| intel_hdcp_component_fini(i915); |
| |
| intel_mode_config_cleanup(i915); |
| |
| intel_overlay_cleanup(i915); |
| |
| intel_gmbus_teardown(i915); |
| |
| destroy_workqueue(i915->flip_wq); |
| destroy_workqueue(i915->modeset_wq); |
| |
| intel_fbc_cleanup_cfb(i915); |
| } |
| |
| /* part #3: call after gem init */ |
| void intel_modeset_driver_remove_nogem(struct drm_i915_private *i915) |
| { |
| intel_dmc_ucode_fini(i915); |
| |
| intel_power_domains_driver_remove(i915); |
| |
| intel_vga_unregister(i915); |
| |
| intel_bios_driver_remove(i915); |
| } |
| |
| void intel_display_driver_register(struct drm_i915_private *i915) |
| { |
| if (!HAS_DISPLAY(i915)) |
| return; |
| |
| intel_display_debugfs_register(i915); |
| |
| /* Must be done after probing outputs */ |
| intel_opregion_register(i915); |
| acpi_video_register(); |
| |
| intel_audio_init(i915); |
| |
| /* |
| * Some ports require correctly set-up hpd registers for |
| * detection to work properly (leading to ghost connected |
| * connector status), e.g. VGA on gm45. Hence we can only set |
| * up the initial fbdev config after hpd irqs are fully |
| * enabled. We do it last so that the async config cannot run |
| * before the connectors are registered. |
| */ |
| intel_fbdev_initial_config_async(&i915->drm); |
| |
| /* |
| * We need to coordinate the hotplugs with the asynchronous |
| * fbdev configuration, for which we use the |
| * fbdev->async_cookie. |
| */ |
| drm_kms_helper_poll_init(&i915->drm); |
| } |
| |
| void intel_display_driver_unregister(struct drm_i915_private *i915) |
| { |
| if (!HAS_DISPLAY(i915)) |
| return; |
| |
| intel_fbdev_unregister(i915); |
| intel_audio_deinit(i915); |
| |
| /* |
| * After flushing the fbdev (incl. a late async config which |
| * will have delayed queuing of a hotplug event), then flush |
| * the hotplug events. |
| */ |
| drm_kms_helper_poll_fini(&i915->drm); |
| drm_atomic_helper_shutdown(&i915->drm); |
| |
| acpi_video_unregister(); |
| intel_opregion_unregister(i915); |
| } |