| /* |
| * Copyright © 2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_damage_helper.h> |
| |
| #include "display/intel_dp.h" |
| |
| #include "i915_drv.h" |
| #include "intel_atomic.h" |
| #include "intel_de.h" |
| #include "intel_display_types.h" |
| #include "intel_dp_aux.h" |
| #include "intel_hdmi.h" |
| #include "intel_psr.h" |
| #include "intel_snps_phy.h" |
| #include "intel_sprite.h" |
| #include "skl_universal_plane.h" |
| |
| /** |
| * DOC: Panel Self Refresh (PSR/SRD) |
| * |
| * Since Haswell Display controller supports Panel Self-Refresh on display |
| * panels witch have a remote frame buffer (RFB) implemented according to PSR |
| * spec in eDP1.3. PSR feature allows the display to go to lower standby states |
| * when system is idle but display is on as it eliminates display refresh |
| * request to DDR memory completely as long as the frame buffer for that |
| * display is unchanged. |
| * |
| * Panel Self Refresh must be supported by both Hardware (source) and |
| * Panel (sink). |
| * |
| * PSR saves power by caching the framebuffer in the panel RFB, which allows us |
| * to power down the link and memory controller. For DSI panels the same idea |
| * is called "manual mode". |
| * |
| * The implementation uses the hardware-based PSR support which automatically |
| * enters/exits self-refresh mode. The hardware takes care of sending the |
| * required DP aux message and could even retrain the link (that part isn't |
| * enabled yet though). The hardware also keeps track of any frontbuffer |
| * changes to know when to exit self-refresh mode again. Unfortunately that |
| * part doesn't work too well, hence why the i915 PSR support uses the |
| * software frontbuffer tracking to make sure it doesn't miss a screen |
| * update. For this integration intel_psr_invalidate() and intel_psr_flush() |
| * get called by the frontbuffer tracking code. Note that because of locking |
| * issues the self-refresh re-enable code is done from a work queue, which |
| * must be correctly synchronized/cancelled when shutting down the pipe." |
| * |
| * DC3CO (DC3 clock off) |
| * |
| * On top of PSR2, GEN12 adds a intermediate power savings state that turns |
| * clock off automatically during PSR2 idle state. |
| * The smaller overhead of DC3co entry/exit vs. the overhead of PSR2 deep sleep |
| * entry/exit allows the HW to enter a low-power state even when page flipping |
| * periodically (for instance a 30fps video playback scenario). |
| * |
| * Every time a flips occurs PSR2 will get out of deep sleep state(if it was), |
| * so DC3CO is enabled and tgl_dc3co_disable_work is schedule to run after 6 |
| * frames, if no other flip occurs and the function above is executed, DC3CO is |
| * disabled and PSR2 is configured to enter deep sleep, resetting again in case |
| * of another flip. |
| * Front buffer modifications do not trigger DC3CO activation on purpose as it |
| * would bring a lot of complexity and most of the moderns systems will only |
| * use page flips. |
| */ |
| |
| static bool psr_global_enabled(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| switch (intel_dp->psr.debug & I915_PSR_DEBUG_MODE_MASK) { |
| case I915_PSR_DEBUG_DEFAULT: |
| return i915->params.enable_psr; |
| case I915_PSR_DEBUG_DISABLE: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static bool psr2_global_enabled(struct intel_dp *intel_dp) |
| { |
| switch (intel_dp->psr.debug & I915_PSR_DEBUG_MODE_MASK) { |
| case I915_PSR_DEBUG_DISABLE: |
| case I915_PSR_DEBUG_FORCE_PSR1: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static void psr_irq_control(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| enum transcoder trans_shift; |
| i915_reg_t imr_reg; |
| u32 mask, val; |
| |
| /* |
| * gen12+ has registers relative to transcoder and one per transcoder |
| * using the same bit definition: handle it as TRANSCODER_EDP to force |
| * 0 shift in bit definition |
| */ |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| trans_shift = 0; |
| imr_reg = TRANS_PSR_IMR(intel_dp->psr.transcoder); |
| } else { |
| trans_shift = intel_dp->psr.transcoder; |
| imr_reg = EDP_PSR_IMR; |
| } |
| |
| mask = EDP_PSR_ERROR(trans_shift); |
| if (intel_dp->psr.debug & I915_PSR_DEBUG_IRQ) |
| mask |= EDP_PSR_POST_EXIT(trans_shift) | |
| EDP_PSR_PRE_ENTRY(trans_shift); |
| |
| /* Warning: it is masking/setting reserved bits too */ |
| val = intel_de_read(dev_priv, imr_reg); |
| val &= ~EDP_PSR_TRANS_MASK(trans_shift); |
| val |= ~mask; |
| intel_de_write(dev_priv, imr_reg, val); |
| } |
| |
| static void psr_event_print(struct drm_i915_private *i915, |
| u32 val, bool psr2_enabled) |
| { |
| drm_dbg_kms(&i915->drm, "PSR exit events: 0x%x\n", val); |
| if (val & PSR_EVENT_PSR2_WD_TIMER_EXPIRE) |
| drm_dbg_kms(&i915->drm, "\tPSR2 watchdog timer expired\n"); |
| if ((val & PSR_EVENT_PSR2_DISABLED) && psr2_enabled) |
| drm_dbg_kms(&i915->drm, "\tPSR2 disabled\n"); |
| if (val & PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN) |
| drm_dbg_kms(&i915->drm, "\tSU dirty FIFO underrun\n"); |
| if (val & PSR_EVENT_SU_CRC_FIFO_UNDERRUN) |
| drm_dbg_kms(&i915->drm, "\tSU CRC FIFO underrun\n"); |
| if (val & PSR_EVENT_GRAPHICS_RESET) |
| drm_dbg_kms(&i915->drm, "\tGraphics reset\n"); |
| if (val & PSR_EVENT_PCH_INTERRUPT) |
| drm_dbg_kms(&i915->drm, "\tPCH interrupt\n"); |
| if (val & PSR_EVENT_MEMORY_UP) |
| drm_dbg_kms(&i915->drm, "\tMemory up\n"); |
| if (val & PSR_EVENT_FRONT_BUFFER_MODIFY) |
| drm_dbg_kms(&i915->drm, "\tFront buffer modification\n"); |
| if (val & PSR_EVENT_WD_TIMER_EXPIRE) |
| drm_dbg_kms(&i915->drm, "\tPSR watchdog timer expired\n"); |
| if (val & PSR_EVENT_PIPE_REGISTERS_UPDATE) |
| drm_dbg_kms(&i915->drm, "\tPIPE registers updated\n"); |
| if (val & PSR_EVENT_REGISTER_UPDATE) |
| drm_dbg_kms(&i915->drm, "\tRegister updated\n"); |
| if (val & PSR_EVENT_HDCP_ENABLE) |
| drm_dbg_kms(&i915->drm, "\tHDCP enabled\n"); |
| if (val & PSR_EVENT_KVMR_SESSION_ENABLE) |
| drm_dbg_kms(&i915->drm, "\tKVMR session enabled\n"); |
| if (val & PSR_EVENT_VBI_ENABLE) |
| drm_dbg_kms(&i915->drm, "\tVBI enabled\n"); |
| if (val & PSR_EVENT_LPSP_MODE_EXIT) |
| drm_dbg_kms(&i915->drm, "\tLPSP mode exited\n"); |
| if ((val & PSR_EVENT_PSR_DISABLE) && !psr2_enabled) |
| drm_dbg_kms(&i915->drm, "\tPSR disabled\n"); |
| } |
| |
| void intel_psr_irq_handler(struct intel_dp *intel_dp, u32 psr_iir) |
| { |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| ktime_t time_ns = ktime_get(); |
| enum transcoder trans_shift; |
| i915_reg_t imr_reg; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| trans_shift = 0; |
| imr_reg = TRANS_PSR_IMR(intel_dp->psr.transcoder); |
| } else { |
| trans_shift = intel_dp->psr.transcoder; |
| imr_reg = EDP_PSR_IMR; |
| } |
| |
| if (psr_iir & EDP_PSR_PRE_ENTRY(trans_shift)) { |
| intel_dp->psr.last_entry_attempt = time_ns; |
| drm_dbg_kms(&dev_priv->drm, |
| "[transcoder %s] PSR entry attempt in 2 vblanks\n", |
| transcoder_name(cpu_transcoder)); |
| } |
| |
| if (psr_iir & EDP_PSR_POST_EXIT(trans_shift)) { |
| intel_dp->psr.last_exit = time_ns; |
| drm_dbg_kms(&dev_priv->drm, |
| "[transcoder %s] PSR exit completed\n", |
| transcoder_name(cpu_transcoder)); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| u32 val = intel_de_read(dev_priv, |
| PSR_EVENT(cpu_transcoder)); |
| bool psr2_enabled = intel_dp->psr.psr2_enabled; |
| |
| intel_de_write(dev_priv, PSR_EVENT(cpu_transcoder), |
| val); |
| psr_event_print(dev_priv, val, psr2_enabled); |
| } |
| } |
| |
| if (psr_iir & EDP_PSR_ERROR(trans_shift)) { |
| u32 val; |
| |
| drm_warn(&dev_priv->drm, "[transcoder %s] PSR aux error\n", |
| transcoder_name(cpu_transcoder)); |
| |
| intel_dp->psr.irq_aux_error = true; |
| |
| /* |
| * If this interruption is not masked it will keep |
| * interrupting so fast that it prevents the scheduled |
| * work to run. |
| * Also after a PSR error, we don't want to arm PSR |
| * again so we don't care about unmask the interruption |
| * or unset irq_aux_error. |
| */ |
| val = intel_de_read(dev_priv, imr_reg); |
| val |= EDP_PSR_ERROR(trans_shift); |
| intel_de_write(dev_priv, imr_reg, val); |
| |
| schedule_work(&intel_dp->psr.work); |
| } |
| } |
| |
| static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp) |
| { |
| u8 alpm_caps = 0; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, DP_RECEIVER_ALPM_CAP, |
| &alpm_caps) != 1) |
| return false; |
| return alpm_caps & DP_ALPM_CAP; |
| } |
| |
| static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 val = 8; /* assume the worst if we can't read the value */ |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_SYNCHRONIZATION_LATENCY_IN_SINK, &val) == 1) |
| val &= DP_MAX_RESYNC_FRAME_COUNT_MASK; |
| else |
| drm_dbg_kms(&i915->drm, |
| "Unable to get sink synchronization latency, assuming 8 frames\n"); |
| return val; |
| } |
| |
| static void intel_dp_get_su_granularity(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| ssize_t r; |
| u16 w; |
| u8 y; |
| |
| /* If sink don't have specific granularity requirements set legacy ones */ |
| if (!(intel_dp->psr_dpcd[1] & DP_PSR2_SU_GRANULARITY_REQUIRED)) { |
| /* As PSR2 HW sends full lines, we do not care about x granularity */ |
| w = 4; |
| y = 4; |
| goto exit; |
| } |
| |
| r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY, &w, 2); |
| if (r != 2) |
| drm_dbg_kms(&i915->drm, |
| "Unable to read DP_PSR2_SU_X_GRANULARITY\n"); |
| /* |
| * Spec says that if the value read is 0 the default granularity should |
| * be used instead. |
| */ |
| if (r != 2 || w == 0) |
| w = 4; |
| |
| r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_Y_GRANULARITY, &y, 1); |
| if (r != 1) { |
| drm_dbg_kms(&i915->drm, |
| "Unable to read DP_PSR2_SU_Y_GRANULARITY\n"); |
| y = 4; |
| } |
| if (y == 0) |
| y = 1; |
| |
| exit: |
| intel_dp->psr.su_w_granularity = w; |
| intel_dp->psr.su_y_granularity = y; |
| } |
| |
| void intel_psr_init_dpcd(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = |
| to_i915(dp_to_dig_port(intel_dp)->base.base.dev); |
| |
| drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT, intel_dp->psr_dpcd, |
| sizeof(intel_dp->psr_dpcd)); |
| |
| if (!intel_dp->psr_dpcd[0]) |
| return; |
| drm_dbg_kms(&dev_priv->drm, "eDP panel supports PSR version %x\n", |
| intel_dp->psr_dpcd[0]); |
| |
| if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_NO_PSR)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR support not currently available for this panel\n"); |
| return; |
| } |
| |
| if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Panel lacks power state control, PSR cannot be enabled\n"); |
| return; |
| } |
| |
| intel_dp->psr.sink_support = true; |
| intel_dp->psr.sink_sync_latency = |
| intel_dp_get_sink_sync_latency(intel_dp); |
| |
| if (DISPLAY_VER(dev_priv) >= 9 && |
| (intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_IS_SUPPORTED)) { |
| bool y_req = intel_dp->psr_dpcd[1] & |
| DP_PSR2_SU_Y_COORDINATE_REQUIRED; |
| bool alpm = intel_dp_get_alpm_status(intel_dp); |
| |
| /* |
| * All panels that supports PSR version 03h (PSR2 + |
| * Y-coordinate) can handle Y-coordinates in VSC but we are |
| * only sure that it is going to be used when required by the |
| * panel. This way panel is capable to do selective update |
| * without a aux frame sync. |
| * |
| * To support PSR version 02h and PSR version 03h without |
| * Y-coordinate requirement panels we would need to enable |
| * GTC first. |
| */ |
| intel_dp->psr.sink_psr2_support = y_req && alpm; |
| drm_dbg_kms(&dev_priv->drm, "PSR2 %ssupported\n", |
| intel_dp->psr.sink_psr2_support ? "" : "not "); |
| |
| if (intel_dp->psr.sink_psr2_support) { |
| intel_dp->psr.colorimetry_support = |
| intel_dp_get_colorimetry_status(intel_dp); |
| intel_dp_get_su_granularity(intel_dp); |
| } |
| } |
| } |
| |
| static void intel_psr_enable_sink(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u8 dpcd_val = DP_PSR_ENABLE; |
| |
| /* Enable ALPM at sink for psr2 */ |
| if (intel_dp->psr.psr2_enabled) { |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG, |
| DP_ALPM_ENABLE | |
| DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE); |
| |
| dpcd_val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS; |
| } else { |
| if (intel_dp->psr.link_standby) |
| dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE; |
| |
| if (DISPLAY_VER(dev_priv) >= 8) |
| dpcd_val |= DP_PSR_CRC_VERIFICATION; |
| } |
| |
| if (intel_dp->psr.req_psr2_sdp_prior_scanline) |
| dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE; |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val); |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); |
| } |
| |
| static u32 intel_psr1_get_tp_time(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 val = 0; |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| val |= EDP_PSR_TP4_TIME_0US; |
| |
| if (dev_priv->params.psr_safest_params) { |
| val |= EDP_PSR_TP1_TIME_2500us; |
| val |= EDP_PSR_TP2_TP3_TIME_2500us; |
| goto check_tp3_sel; |
| } |
| |
| if (dev_priv->vbt.psr.tp1_wakeup_time_us == 0) |
| val |= EDP_PSR_TP1_TIME_0us; |
| else if (dev_priv->vbt.psr.tp1_wakeup_time_us <= 100) |
| val |= EDP_PSR_TP1_TIME_100us; |
| else if (dev_priv->vbt.psr.tp1_wakeup_time_us <= 500) |
| val |= EDP_PSR_TP1_TIME_500us; |
| else |
| val |= EDP_PSR_TP1_TIME_2500us; |
| |
| if (dev_priv->vbt.psr.tp2_tp3_wakeup_time_us == 0) |
| val |= EDP_PSR_TP2_TP3_TIME_0us; |
| else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time_us <= 100) |
| val |= EDP_PSR_TP2_TP3_TIME_100us; |
| else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time_us <= 500) |
| val |= EDP_PSR_TP2_TP3_TIME_500us; |
| else |
| val |= EDP_PSR_TP2_TP3_TIME_2500us; |
| |
| check_tp3_sel: |
| if (intel_dp_source_supports_tps3(dev_priv) && |
| drm_dp_tps3_supported(intel_dp->dpcd)) |
| val |= EDP_PSR_TP1_TP3_SEL; |
| else |
| val |= EDP_PSR_TP1_TP2_SEL; |
| |
| return val; |
| } |
| |
| static u8 psr_compute_idle_frames(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| int idle_frames; |
| |
| /* Let's use 6 as the minimum to cover all known cases including the |
| * off-by-one issue that HW has in some cases. |
| */ |
| idle_frames = max(6, dev_priv->vbt.psr.idle_frames); |
| idle_frames = max(idle_frames, intel_dp->psr.sink_sync_latency + 1); |
| |
| if (drm_WARN_ON(&dev_priv->drm, idle_frames > 0xf)) |
| idle_frames = 0xf; |
| |
| return idle_frames; |
| } |
| |
| static void hsw_activate_psr1(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 max_sleep_time = 0x1f; |
| u32 val = EDP_PSR_ENABLE; |
| |
| val |= psr_compute_idle_frames(intel_dp) << EDP_PSR_IDLE_FRAME_SHIFT; |
| |
| val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT; |
| if (IS_HASWELL(dev_priv)) |
| val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; |
| |
| if (intel_dp->psr.link_standby) |
| val |= EDP_PSR_LINK_STANDBY; |
| |
| val |= intel_psr1_get_tp_time(intel_dp); |
| |
| if (DISPLAY_VER(dev_priv) >= 8) |
| val |= EDP_PSR_CRC_ENABLE; |
| |
| val |= (intel_de_read(dev_priv, EDP_PSR_CTL(intel_dp->psr.transcoder)) & |
| EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK); |
| intel_de_write(dev_priv, EDP_PSR_CTL(intel_dp->psr.transcoder), val); |
| } |
| |
| static u32 intel_psr2_get_tp_time(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 val = 0; |
| |
| if (dev_priv->params.psr_safest_params) |
| return EDP_PSR2_TP2_TIME_2500us; |
| |
| if (dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us >= 0 && |
| dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 50) |
| val |= EDP_PSR2_TP2_TIME_50us; |
| else if (dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 100) |
| val |= EDP_PSR2_TP2_TIME_100us; |
| else if (dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 500) |
| val |= EDP_PSR2_TP2_TIME_500us; |
| else |
| val |= EDP_PSR2_TP2_TIME_2500us; |
| |
| return val; |
| } |
| |
| static void hsw_activate_psr2(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 val = EDP_PSR2_ENABLE; |
| |
| val |= psr_compute_idle_frames(intel_dp) << EDP_PSR2_IDLE_FRAME_SHIFT; |
| |
| if (!IS_ALDERLAKE_P(dev_priv)) |
| val |= EDP_SU_TRACK_ENABLE; |
| |
| if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <= 12) |
| val |= EDP_Y_COORDINATE_ENABLE; |
| |
| val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp->psr.sink_sync_latency + 1, 2)); |
| val |= intel_psr2_get_tp_time(intel_dp); |
| |
| /* Wa_22012278275:adl-p */ |
| if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_E0)) { |
| static const u8 map[] = { |
| 2, /* 5 lines */ |
| 1, /* 6 lines */ |
| 0, /* 7 lines */ |
| 3, /* 8 lines */ |
| 6, /* 9 lines */ |
| 5, /* 10 lines */ |
| 4, /* 11 lines */ |
| 7, /* 12 lines */ |
| }; |
| /* |
| * Still using the default IO_BUFFER_WAKE and FAST_WAKE, see |
| * comments bellow for more information |
| */ |
| u32 tmp, lines = 7; |
| |
| val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2; |
| |
| tmp = map[lines - TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES]; |
| tmp = tmp << TGL_EDP_PSR2_IO_BUFFER_WAKE_SHIFT; |
| val |= tmp; |
| |
| tmp = map[lines - TGL_EDP_PSR2_FAST_WAKE_MIN_LINES]; |
| tmp = tmp << TGL_EDP_PSR2_FAST_WAKE_MIN_SHIFT; |
| val |= tmp; |
| } else if (DISPLAY_VER(dev_priv) >= 12) { |
| /* |
| * TODO: 7 lines of IO_BUFFER_WAKE and FAST_WAKE are default |
| * values from BSpec. In order to setting an optimal power |
| * consumption, lower than 4k resoluition mode needs to decrese |
| * IO_BUFFER_WAKE and FAST_WAKE. And higher than 4K resolution |
| * mode needs to increase IO_BUFFER_WAKE and FAST_WAKE. |
| */ |
| val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2; |
| val |= TGL_EDP_PSR2_IO_BUFFER_WAKE(7); |
| val |= TGL_EDP_PSR2_FAST_WAKE(7); |
| } else if (DISPLAY_VER(dev_priv) >= 9) { |
| val |= EDP_PSR2_IO_BUFFER_WAKE(7); |
| val |= EDP_PSR2_FAST_WAKE(7); |
| } |
| |
| if (intel_dp->psr.req_psr2_sdp_prior_scanline) |
| val |= EDP_PSR2_SU_SDP_SCANLINE; |
| |
| if (intel_dp->psr.psr2_sel_fetch_enabled) { |
| u32 tmp; |
| |
| /* Wa_1408330847 */ |
| if (IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) |
| intel_de_rmw(dev_priv, CHICKEN_PAR1_1, |
| DIS_RAM_BYPASS_PSR2_MAN_TRACK, |
| DIS_RAM_BYPASS_PSR2_MAN_TRACK); |
| |
| tmp = intel_de_read(dev_priv, PSR2_MAN_TRK_CTL(intel_dp->psr.transcoder)); |
| drm_WARN_ON(&dev_priv->drm, !(tmp & PSR2_MAN_TRK_CTL_ENABLE)); |
| } else if (HAS_PSR2_SEL_FETCH(dev_priv)) { |
| intel_de_write(dev_priv, |
| PSR2_MAN_TRK_CTL(intel_dp->psr.transcoder), 0); |
| } |
| |
| /* |
| * PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec is |
| * recommending keep this bit unset while PSR2 is enabled. |
| */ |
| intel_de_write(dev_priv, EDP_PSR_CTL(intel_dp->psr.transcoder), 0); |
| |
| intel_de_write(dev_priv, EDP_PSR2_CTL(intel_dp->psr.transcoder), val); |
| } |
| |
| static bool |
| transcoder_has_psr2(struct drm_i915_private *dev_priv, enum transcoder trans) |
| { |
| if (DISPLAY_VER(dev_priv) >= 12) |
| return trans == TRANSCODER_A; |
| else |
| return trans == TRANSCODER_EDP; |
| } |
| |
| static u32 intel_get_frame_time_us(const struct intel_crtc_state *cstate) |
| { |
| if (!cstate || !cstate->hw.active) |
| return 0; |
| |
| return DIV_ROUND_UP(1000 * 1000, |
| drm_mode_vrefresh(&cstate->hw.adjusted_mode)); |
| } |
| |
| static void psr2_program_idle_frames(struct intel_dp *intel_dp, |
| u32 idle_frames) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 val; |
| |
| idle_frames <<= EDP_PSR2_IDLE_FRAME_SHIFT; |
| val = intel_de_read(dev_priv, EDP_PSR2_CTL(intel_dp->psr.transcoder)); |
| val &= ~EDP_PSR2_IDLE_FRAME_MASK; |
| val |= idle_frames; |
| intel_de_write(dev_priv, EDP_PSR2_CTL(intel_dp->psr.transcoder), val); |
| } |
| |
| static void tgl_psr2_enable_dc3co(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| psr2_program_idle_frames(intel_dp, 0); |
| intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_DC3CO); |
| } |
| |
| static void tgl_psr2_disable_dc3co(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); |
| psr2_program_idle_frames(intel_dp, psr_compute_idle_frames(intel_dp)); |
| } |
| |
| static void tgl_dc3co_disable_work(struct work_struct *work) |
| { |
| struct intel_dp *intel_dp = |
| container_of(work, typeof(*intel_dp), psr.dc3co_work.work); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| /* If delayed work is pending, it is not idle */ |
| if (delayed_work_pending(&intel_dp->psr.dc3co_work)) |
| goto unlock; |
| |
| tgl_psr2_disable_dc3co(intel_dp); |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| |
| static void tgl_disallow_dc3co_on_psr2_exit(struct intel_dp *intel_dp) |
| { |
| if (!intel_dp->psr.dc3co_exitline) |
| return; |
| |
| cancel_delayed_work(&intel_dp->psr.dc3co_work); |
| /* Before PSR2 exit disallow dc3co*/ |
| tgl_psr2_disable_dc3co(intel_dp); |
| } |
| |
| static bool |
| dc3co_is_pipe_port_compatible(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| enum port port = dig_port->base.port; |
| |
| if (IS_ALDERLAKE_P(dev_priv)) |
| return pipe <= PIPE_B && port <= PORT_B; |
| else |
| return pipe == PIPE_A && port == PORT_A; |
| } |
| |
| static void |
| tgl_dc3co_exitline_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| const u32 crtc_vdisplay = crtc_state->uapi.adjusted_mode.crtc_vdisplay; |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 exit_scanlines; |
| |
| /* |
| * FIXME: Due to the changed sequence of activating/deactivating DC3CO, |
| * disable DC3CO until the changed dc3co activating/deactivating sequence |
| * is applied. B.Specs:49196 |
| */ |
| return; |
| |
| /* |
| * DMC's DC3CO exit mechanism has an issue with Selective Fecth |
| * TODO: when the issue is addressed, this restriction should be removed. |
| */ |
| if (crtc_state->enable_psr2_sel_fetch) |
| return; |
| |
| if (!(dev_priv->dmc.allowed_dc_mask & DC_STATE_EN_DC3CO)) |
| return; |
| |
| if (!dc3co_is_pipe_port_compatible(intel_dp, crtc_state)) |
| return; |
| |
| /* Wa_16011303918:adl-p */ |
| if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) |
| return; |
| |
| /* |
| * DC3CO Exit time 200us B.Spec 49196 |
| * PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1 |
| */ |
| exit_scanlines = |
| intel_usecs_to_scanlines(&crtc_state->uapi.adjusted_mode, 200) + 1; |
| |
| if (drm_WARN_ON(&dev_priv->drm, exit_scanlines > crtc_vdisplay)) |
| return; |
| |
| crtc_state->dc3co_exitline = crtc_vdisplay - exit_scanlines; |
| } |
| |
| static bool intel_psr2_sel_fetch_config_valid(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| if (!dev_priv->params.enable_psr2_sel_fetch && |
| intel_dp->psr.debug != I915_PSR_DEBUG_ENABLE_SEL_FETCH) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 sel fetch not enabled, disabled by parameter\n"); |
| return false; |
| } |
| |
| if (crtc_state->uapi.async_flip) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 sel fetch not enabled, async flip enabled\n"); |
| return false; |
| } |
| |
| /* Wa_14010254185 Wa_14010103792 */ |
| if (IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_C0)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 sel fetch not enabled, missing the implementation of WAs\n"); |
| return false; |
| } |
| |
| return crtc_state->enable_psr2_sel_fetch = true; |
| } |
| |
| static bool psr2_granularity_check(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| const int crtc_hdisplay = crtc_state->hw.adjusted_mode.crtc_hdisplay; |
| const int crtc_vdisplay = crtc_state->hw.adjusted_mode.crtc_vdisplay; |
| u16 y_granularity = 0; |
| |
| /* PSR2 HW only send full lines so we only need to validate the width */ |
| if (crtc_hdisplay % intel_dp->psr.su_w_granularity) |
| return false; |
| |
| if (crtc_vdisplay % intel_dp->psr.su_y_granularity) |
| return false; |
| |
| /* HW tracking is only aligned to 4 lines */ |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return intel_dp->psr.su_y_granularity == 4; |
| |
| /* |
| * adl_p has 1 line granularity. For other platforms with SW tracking we |
| * can adjust the y coordinates to match sink requirement if multiple of |
| * 4. |
| */ |
| if (IS_ALDERLAKE_P(dev_priv)) |
| y_granularity = intel_dp->psr.su_y_granularity; |
| else if (intel_dp->psr.su_y_granularity <= 2) |
| y_granularity = 4; |
| else if ((intel_dp->psr.su_y_granularity % 4) == 0) |
| y_granularity = intel_dp->psr.su_y_granularity; |
| |
| if (y_granularity == 0 || crtc_vdisplay % y_granularity) |
| return false; |
| |
| crtc_state->su_y_granularity = y_granularity; |
| return true; |
| } |
| |
| static bool _compute_psr2_sdp_prior_scanline_indication(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_display_mode *adjusted_mode = &crtc_state->uapi.adjusted_mode; |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 hblank_total, hblank_ns, req_ns; |
| |
| hblank_total = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; |
| hblank_ns = div_u64(1000000ULL * hblank_total, adjusted_mode->crtc_clock); |
| |
| /* From spec: (72 / number of lanes) * 1000 / symbol clock frequency MHz */ |
| req_ns = (72 / crtc_state->lane_count) * 1000 / (crtc_state->port_clock / 1000); |
| |
| if ((hblank_ns - req_ns) > 100) |
| return true; |
| |
| if (DISPLAY_VER(dev_priv) < 13 || intel_dp->edp_dpcd[0] < DP_EDP_14b) |
| return false; |
| |
| crtc_state->req_psr2_sdp_prior_scanline = true; |
| return true; |
| } |
| |
| static bool intel_psr2_config_valid(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| int crtc_hdisplay = crtc_state->hw.adjusted_mode.crtc_hdisplay; |
| int crtc_vdisplay = crtc_state->hw.adjusted_mode.crtc_vdisplay; |
| int psr_max_h = 0, psr_max_v = 0, max_bpp = 0; |
| |
| if (!intel_dp->psr.sink_psr2_support) |
| return false; |
| |
| /* JSL and EHL only supports eDP 1.3 */ |
| if (IS_JSL_EHL(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR2 not supported by phy\n"); |
| return false; |
| } |
| |
| /* Wa_16011181250 */ |
| if (IS_ROCKETLAKE(dev_priv) || IS_ALDERLAKE_S(dev_priv) || |
| IS_DG2(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR2 is defeatured for this platform\n"); |
| return false; |
| } |
| |
| if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR2 not completely functional in this stepping\n"); |
| return false; |
| } |
| |
| if (!transcoder_has_psr2(dev_priv, crtc_state->cpu_transcoder)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not supported in transcoder %s\n", |
| transcoder_name(crtc_state->cpu_transcoder)); |
| return false; |
| } |
| |
| if (!psr2_global_enabled(intel_dp)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR2 disabled by flag\n"); |
| return false; |
| } |
| |
| /* |
| * DSC and PSR2 cannot be enabled simultaneously. If a requested |
| * resolution requires DSC to be enabled, priority is given to DSC |
| * over PSR2. |
| */ |
| if (crtc_state->dsc.compression_enable) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 cannot be enabled since DSC is enabled\n"); |
| return false; |
| } |
| |
| if (crtc_state->crc_enabled) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not enabled because it would inhibit pipe CRC calculation\n"); |
| return false; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| psr_max_h = 5120; |
| psr_max_v = 3200; |
| max_bpp = 30; |
| } else if (DISPLAY_VER(dev_priv) >= 10) { |
| psr_max_h = 4096; |
| psr_max_v = 2304; |
| max_bpp = 24; |
| } else if (DISPLAY_VER(dev_priv) == 9) { |
| psr_max_h = 3640; |
| psr_max_v = 2304; |
| max_bpp = 24; |
| } |
| |
| if (crtc_state->pipe_bpp > max_bpp) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not enabled, pipe bpp %d > max supported %d\n", |
| crtc_state->pipe_bpp, max_bpp); |
| return false; |
| } |
| |
| if (HAS_PSR2_SEL_FETCH(dev_priv)) { |
| if (!intel_psr2_sel_fetch_config_valid(intel_dp, crtc_state) && |
| !HAS_PSR_HW_TRACKING(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not enabled, selective fetch not valid and no HW tracking available\n"); |
| return false; |
| } |
| } |
| |
| /* Wa_2209313811 */ |
| if (!crtc_state->enable_psr2_sel_fetch && |
| IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_C0)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR2 HW tracking is not supported this Display stepping\n"); |
| return false; |
| } |
| |
| if (!psr2_granularity_check(intel_dp, crtc_state)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR2 not enabled, SU granularity not compatible\n"); |
| return false; |
| } |
| |
| if (!crtc_state->enable_psr2_sel_fetch && |
| (crtc_hdisplay > psr_max_h || crtc_vdisplay > psr_max_v)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not enabled, resolution %dx%d > max supported %dx%d\n", |
| crtc_hdisplay, crtc_vdisplay, |
| psr_max_h, psr_max_v); |
| return false; |
| } |
| |
| if (!_compute_psr2_sdp_prior_scanline_indication(intel_dp, crtc_state)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not enabled, PSR2 SDP indication do not fit in hblank\n"); |
| return false; |
| } |
| |
| /* Wa_16011303918:adl-p */ |
| if (crtc_state->vrr.enable && |
| IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR2 not enabled, not compatible with HW stepping + VRR\n"); |
| return false; |
| } |
| |
| tgl_dc3co_exitline_compute_config(intel_dp, crtc_state); |
| return true; |
| } |
| |
| void intel_psr_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| int psr_setup_time; |
| |
| /* |
| * Current PSR panels dont work reliably with VRR enabled |
| * So if VRR is enabled, do not enable PSR. |
| */ |
| if (crtc_state->vrr.enable) |
| return; |
| |
| if (!CAN_PSR(intel_dp)) |
| return; |
| |
| if (!psr_global_enabled(intel_dp)) { |
| drm_dbg_kms(&dev_priv->drm, "PSR disabled by flag\n"); |
| return; |
| } |
| |
| if (intel_dp->psr.sink_not_reliable) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR sink implementation is not reliable\n"); |
| return; |
| } |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR condition failed: Interlaced mode enabled\n"); |
| return; |
| } |
| |
| psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd); |
| if (psr_setup_time < 0) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR condition failed: Invalid PSR setup time (0x%02x)\n", |
| intel_dp->psr_dpcd[1]); |
| return; |
| } |
| |
| if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) > |
| adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR condition failed: PSR setup time (%d us) too long\n", |
| psr_setup_time); |
| return; |
| } |
| |
| crtc_state->has_psr = true; |
| crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state); |
| |
| crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); |
| intel_dp_compute_psr_vsc_sdp(intel_dp, crtc_state, conn_state, |
| &crtc_state->psr_vsc); |
| } |
| |
| void intel_psr_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_dp *intel_dp; |
| u32 val; |
| |
| if (!dig_port) |
| return; |
| |
| intel_dp = &dig_port->dp; |
| if (!CAN_PSR(intel_dp)) |
| return; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled) |
| goto unlock; |
| |
| /* |
| * Not possible to read EDP_PSR/PSR2_CTL registers as it is |
| * enabled/disabled because of frontbuffer tracking and others. |
| */ |
| pipe_config->has_psr = true; |
| pipe_config->has_psr2 = intel_dp->psr.psr2_enabled; |
| pipe_config->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); |
| |
| if (!intel_dp->psr.psr2_enabled) |
| goto unlock; |
| |
| if (HAS_PSR2_SEL_FETCH(dev_priv)) { |
| val = intel_de_read(dev_priv, PSR2_MAN_TRK_CTL(intel_dp->psr.transcoder)); |
| if (val & PSR2_MAN_TRK_CTL_ENABLE) |
| pipe_config->enable_psr2_sel_fetch = true; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| val = intel_de_read(dev_priv, EXITLINE(intel_dp->psr.transcoder)); |
| val &= EXITLINE_MASK; |
| pipe_config->dc3co_exitline = val; |
| } |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| |
| static void intel_psr_activate(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| enum transcoder transcoder = intel_dp->psr.transcoder; |
| |
| if (transcoder_has_psr2(dev_priv, transcoder)) |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, EDP_PSR2_CTL(transcoder)) & EDP_PSR2_ENABLE); |
| |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, EDP_PSR_CTL(transcoder)) & EDP_PSR_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, intel_dp->psr.active); |
| lockdep_assert_held(&intel_dp->psr.lock); |
| |
| /* psr1 and psr2 are mutually exclusive.*/ |
| if (intel_dp->psr.psr2_enabled) |
| hsw_activate_psr2(intel_dp); |
| else |
| hsw_activate_psr1(intel_dp); |
| |
| intel_dp->psr.active = true; |
| } |
| |
| static void intel_psr_enable_source(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 mask; |
| |
| if (intel_dp->psr.psr2_enabled && DISPLAY_VER(dev_priv) == 9) { |
| i915_reg_t reg = CHICKEN_TRANS(cpu_transcoder); |
| u32 chicken = intel_de_read(dev_priv, reg); |
| |
| chicken |= PSR2_VSC_ENABLE_PROG_HEADER | |
| PSR2_ADD_VERTICAL_LINE_COUNT; |
| intel_de_write(dev_priv, reg, chicken); |
| } |
| |
| /* |
| * Wa_16014451276:adlp |
| * All supported adlp panels have 1-based X granularity, this may |
| * cause issues if non-supported panels are used. |
| */ |
| if (IS_ALDERLAKE_P(dev_priv) && |
| intel_dp->psr.psr2_enabled) |
| intel_de_rmw(dev_priv, CHICKEN_TRANS(cpu_transcoder), 0, |
| ADLP_1_BASED_X_GRANULARITY); |
| |
| /* |
| * Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD also |
| * mask LPSP to avoid dependency on other drivers that might block |
| * runtime_pm besides preventing other hw tracking issues now we |
| * can rely on frontbuffer tracking. |
| */ |
| mask = EDP_PSR_DEBUG_MASK_MEMUP | |
| EDP_PSR_DEBUG_MASK_HPD | |
| EDP_PSR_DEBUG_MASK_LPSP | |
| EDP_PSR_DEBUG_MASK_MAX_SLEEP; |
| |
| if (DISPLAY_VER(dev_priv) < 11) |
| mask |= EDP_PSR_DEBUG_MASK_DISP_REG_WRITE; |
| |
| intel_de_write(dev_priv, EDP_PSR_DEBUG(intel_dp->psr.transcoder), |
| mask); |
| |
| psr_irq_control(intel_dp); |
| |
| if (intel_dp->psr.dc3co_exitline) { |
| u32 val; |
| |
| /* |
| * TODO: if future platforms supports DC3CO in more than one |
| * transcoder, EXITLINE will need to be unset when disabling PSR |
| */ |
| val = intel_de_read(dev_priv, EXITLINE(cpu_transcoder)); |
| val &= ~EXITLINE_MASK; |
| val |= intel_dp->psr.dc3co_exitline << EXITLINE_SHIFT; |
| val |= EXITLINE_ENABLE; |
| intel_de_write(dev_priv, EXITLINE(cpu_transcoder), val); |
| } |
| |
| if (HAS_PSR_HW_TRACKING(dev_priv) && HAS_PSR2_SEL_FETCH(dev_priv)) |
| intel_de_rmw(dev_priv, CHICKEN_PAR1_1, IGNORE_PSR2_HW_TRACKING, |
| intel_dp->psr.psr2_sel_fetch_enabled ? |
| IGNORE_PSR2_HW_TRACKING : 0); |
| |
| /* Wa_16011168373:adl-p */ |
| if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0) && |
| intel_dp->psr.psr2_enabled) |
| intel_de_rmw(dev_priv, |
| TRANS_SET_CONTEXT_LATENCY(intel_dp->psr.transcoder), |
| TRANS_SET_CONTEXT_LATENCY_MASK, |
| TRANS_SET_CONTEXT_LATENCY_VALUE(1)); |
| |
| /* Wa_16012604467:adlp */ |
| if (IS_ALDERLAKE_P(dev_priv) && intel_dp->psr.psr2_enabled) |
| intel_de_rmw(dev_priv, CLKGATE_DIS_MISC, 0, |
| CLKGATE_DIS_MISC_DMASC_GATING_DIS); |
| } |
| |
| static bool psr_interrupt_error_check(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 val; |
| |
| /* |
| * If a PSR error happened and the driver is reloaded, the EDP_PSR_IIR |
| * will still keep the error set even after the reset done in the |
| * irq_preinstall and irq_uninstall hooks. |
| * And enabling in this situation cause the screen to freeze in the |
| * first time that PSR HW tries to activate so lets keep PSR disabled |
| * to avoid any rendering problems. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| val = intel_de_read(dev_priv, |
| TRANS_PSR_IIR(intel_dp->psr.transcoder)); |
| val &= EDP_PSR_ERROR(0); |
| } else { |
| val = intel_de_read(dev_priv, EDP_PSR_IIR); |
| val &= EDP_PSR_ERROR(intel_dp->psr.transcoder); |
| } |
| if (val) { |
| intel_dp->psr.sink_not_reliable = true; |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR interruption error set, not enabling PSR\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void intel_psr_enable_locked(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port); |
| struct intel_encoder *encoder = &dig_port->base; |
| u32 val; |
| |
| drm_WARN_ON(&dev_priv->drm, intel_dp->psr.enabled); |
| |
| intel_dp->psr.psr2_enabled = crtc_state->has_psr2; |
| intel_dp->psr.busy_frontbuffer_bits = 0; |
| intel_dp->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| intel_dp->psr.transcoder = crtc_state->cpu_transcoder; |
| /* DC5/DC6 requires at least 6 idle frames */ |
| val = usecs_to_jiffies(intel_get_frame_time_us(crtc_state) * 6); |
| intel_dp->psr.dc3co_exit_delay = val; |
| intel_dp->psr.dc3co_exitline = crtc_state->dc3co_exitline; |
| intel_dp->psr.psr2_sel_fetch_enabled = crtc_state->enable_psr2_sel_fetch; |
| intel_dp->psr.req_psr2_sdp_prior_scanline = |
| crtc_state->req_psr2_sdp_prior_scanline; |
| |
| if (!psr_interrupt_error_check(intel_dp)) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, "Enabling PSR%s\n", |
| intel_dp->psr.psr2_enabled ? "2" : "1"); |
| intel_write_dp_vsc_sdp(encoder, crtc_state, &crtc_state->psr_vsc); |
| intel_snps_phy_update_psr_power_state(dev_priv, phy, true); |
| intel_psr_enable_sink(intel_dp); |
| intel_psr_enable_source(intel_dp); |
| intel_dp->psr.enabled = true; |
| intel_dp->psr.paused = false; |
| |
| intel_psr_activate(intel_dp); |
| } |
| |
| static void intel_psr_exit(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u32 val; |
| |
| if (!intel_dp->psr.active) { |
| if (transcoder_has_psr2(dev_priv, intel_dp->psr.transcoder)) { |
| val = intel_de_read(dev_priv, |
| EDP_PSR2_CTL(intel_dp->psr.transcoder)); |
| drm_WARN_ON(&dev_priv->drm, val & EDP_PSR2_ENABLE); |
| } |
| |
| val = intel_de_read(dev_priv, |
| EDP_PSR_CTL(intel_dp->psr.transcoder)); |
| drm_WARN_ON(&dev_priv->drm, val & EDP_PSR_ENABLE); |
| |
| return; |
| } |
| |
| if (intel_dp->psr.psr2_enabled) { |
| tgl_disallow_dc3co_on_psr2_exit(intel_dp); |
| val = intel_de_read(dev_priv, |
| EDP_PSR2_CTL(intel_dp->psr.transcoder)); |
| drm_WARN_ON(&dev_priv->drm, !(val & EDP_PSR2_ENABLE)); |
| val &= ~EDP_PSR2_ENABLE; |
| intel_de_write(dev_priv, |
| EDP_PSR2_CTL(intel_dp->psr.transcoder), val); |
| } else { |
| val = intel_de_read(dev_priv, |
| EDP_PSR_CTL(intel_dp->psr.transcoder)); |
| drm_WARN_ON(&dev_priv->drm, !(val & EDP_PSR_ENABLE)); |
| val &= ~EDP_PSR_ENABLE; |
| intel_de_write(dev_priv, |
| EDP_PSR_CTL(intel_dp->psr.transcoder), val); |
| } |
| intel_dp->psr.active = false; |
| } |
| |
| static void intel_psr_wait_exit_locked(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| i915_reg_t psr_status; |
| u32 psr_status_mask; |
| |
| if (intel_dp->psr.psr2_enabled) { |
| psr_status = EDP_PSR2_STATUS(intel_dp->psr.transcoder); |
| psr_status_mask = EDP_PSR2_STATUS_STATE_MASK; |
| } else { |
| psr_status = EDP_PSR_STATUS(intel_dp->psr.transcoder); |
| psr_status_mask = EDP_PSR_STATUS_STATE_MASK; |
| } |
| |
| /* Wait till PSR is idle */ |
| if (intel_de_wait_for_clear(dev_priv, psr_status, |
| psr_status_mask, 2000)) |
| drm_err(&dev_priv->drm, "Timed out waiting PSR idle state\n"); |
| } |
| |
| static void intel_psr_disable_locked(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| enum phy phy = intel_port_to_phy(dev_priv, |
| dp_to_dig_port(intel_dp)->base.port); |
| |
| lockdep_assert_held(&intel_dp->psr.lock); |
| |
| if (!intel_dp->psr.enabled) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, "Disabling PSR%s\n", |
| intel_dp->psr.psr2_enabled ? "2" : "1"); |
| |
| intel_psr_exit(intel_dp); |
| intel_psr_wait_exit_locked(intel_dp); |
| |
| /* Wa_1408330847 */ |
| if (intel_dp->psr.psr2_sel_fetch_enabled && |
| IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) |
| intel_de_rmw(dev_priv, CHICKEN_PAR1_1, |
| DIS_RAM_BYPASS_PSR2_MAN_TRACK, 0); |
| |
| /* Wa_16011168373:adl-p */ |
| if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0) && |
| intel_dp->psr.psr2_enabled) |
| intel_de_rmw(dev_priv, |
| TRANS_SET_CONTEXT_LATENCY(intel_dp->psr.transcoder), |
| TRANS_SET_CONTEXT_LATENCY_MASK, 0); |
| |
| /* Wa_16012604467:adlp */ |
| if (IS_ALDERLAKE_P(dev_priv) && intel_dp->psr.psr2_enabled) |
| intel_de_rmw(dev_priv, CLKGATE_DIS_MISC, |
| CLKGATE_DIS_MISC_DMASC_GATING_DIS, 0); |
| |
| intel_snps_phy_update_psr_power_state(dev_priv, phy, false); |
| |
| /* Disable PSR on Sink */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0); |
| |
| if (intel_dp->psr.psr2_enabled) |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG, 0); |
| |
| intel_dp->psr.enabled = false; |
| } |
| |
| /** |
| * intel_psr_disable - Disable PSR |
| * @intel_dp: Intel DP |
| * @old_crtc_state: old CRTC state |
| * |
| * This function needs to be called before disabling pipe. |
| */ |
| void intel_psr_disable(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *old_crtc_state) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| if (!old_crtc_state->has_psr) |
| return; |
| |
| if (drm_WARN_ON(&dev_priv->drm, !CAN_PSR(intel_dp))) |
| return; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| |
| intel_psr_disable_locked(intel_dp); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| cancel_work_sync(&intel_dp->psr.work); |
| cancel_delayed_work_sync(&intel_dp->psr.dc3co_work); |
| } |
| |
| /** |
| * intel_psr_pause - Pause PSR |
| * @intel_dp: Intel DP |
| * |
| * This function need to be called after enabling psr. |
| */ |
| void intel_psr_pause(struct intel_dp *intel_dp) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| if (!CAN_PSR(intel_dp)) |
| return; |
| |
| mutex_lock(&psr->lock); |
| |
| if (!psr->enabled) { |
| mutex_unlock(&psr->lock); |
| return; |
| } |
| |
| intel_psr_exit(intel_dp); |
| intel_psr_wait_exit_locked(intel_dp); |
| psr->paused = true; |
| |
| mutex_unlock(&psr->lock); |
| |
| cancel_work_sync(&psr->work); |
| cancel_delayed_work_sync(&psr->dc3co_work); |
| } |
| |
| /** |
| * intel_psr_resume - Resume PSR |
| * @intel_dp: Intel DP |
| * |
| * This function need to be called after pausing psr. |
| */ |
| void intel_psr_resume(struct intel_dp *intel_dp) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| if (!CAN_PSR(intel_dp)) |
| return; |
| |
| mutex_lock(&psr->lock); |
| |
| if (!psr->paused) |
| goto unlock; |
| |
| psr->paused = false; |
| intel_psr_activate(intel_dp); |
| |
| unlock: |
| mutex_unlock(&psr->lock); |
| } |
| |
| static inline u32 man_trk_ctl_single_full_frame_bit_get(struct drm_i915_private *dev_priv) |
| { |
| return IS_ALDERLAKE_P(dev_priv) ? |
| ADLP_PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME : |
| PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME; |
| } |
| |
| static void psr_force_hw_tracking_exit(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| if (intel_dp->psr.psr2_sel_fetch_enabled) |
| intel_de_rmw(dev_priv, |
| PSR2_MAN_TRK_CTL(intel_dp->psr.transcoder), 0, |
| man_trk_ctl_single_full_frame_bit_get(dev_priv)); |
| |
| /* |
| * Display WA #0884: skl+ |
| * This documented WA for bxt can be safely applied |
| * broadly so we can force HW tracking to exit PSR |
| * instead of disabling and re-enabling. |
| * Workaround tells us to write 0 to CUR_SURFLIVE_A, |
| * but it makes more sense write to the current active |
| * pipe. |
| * |
| * This workaround do not exist for platforms with display 10 or newer |
| * but testing proved that it works for up display 13, for newer |
| * than that testing will be needed. |
| */ |
| intel_de_write(dev_priv, CURSURFLIVE(intel_dp->psr.pipe), 0); |
| } |
| |
| void intel_psr2_disable_plane_sel_fetch(struct intel_plane *plane, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(plane->base.dev); |
| enum pipe pipe = plane->pipe; |
| |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return; |
| |
| intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id), 0); |
| } |
| |
| void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane, |
| const struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state, |
| int color_plane) |
| { |
| struct drm_i915_private *dev_priv = to_i915(plane->base.dev); |
| enum pipe pipe = plane->pipe; |
| const struct drm_rect *clip; |
| u32 val; |
| int x, y; |
| |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return; |
| |
| if (plane->id == PLANE_CURSOR) { |
| intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id), |
| plane_state->ctl); |
| return; |
| } |
| |
| clip = &plane_state->psr2_sel_fetch_area; |
| |
| val = (clip->y1 + plane_state->uapi.dst.y1) << 16; |
| val |= plane_state->uapi.dst.x1; |
| intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe, plane->id), val); |
| |
| /* TODO: consider auxiliary surfaces */ |
| x = plane_state->uapi.src.x1 >> 16; |
| y = (plane_state->uapi.src.y1 >> 16) + clip->y1; |
| val = y << 16 | x; |
| intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_OFFSET(pipe, plane->id), |
| val); |
| |
| /* Sizes are 0 based */ |
| val = (drm_rect_height(clip) - 1) << 16; |
| val |= (drm_rect_width(&plane_state->uapi.src) >> 16) - 1; |
| intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe, plane->id), val); |
| |
| intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id), |
| PLANE_SEL_FETCH_CTL_ENABLE); |
| } |
| |
| void intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return; |
| |
| intel_de_write(dev_priv, PSR2_MAN_TRK_CTL(crtc_state->cpu_transcoder), |
| crtc_state->psr2_man_track_ctl); |
| } |
| |
| static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state, |
| struct drm_rect *clip, bool full_update) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 val = PSR2_MAN_TRK_CTL_ENABLE; |
| |
| if (full_update) { |
| /* |
| * Not applying Wa_14014971508:adlp as we do not support the |
| * feature that requires this workaround. |
| */ |
| val |= man_trk_ctl_single_full_frame_bit_get(dev_priv); |
| goto exit; |
| } |
| |
| if (clip->y1 == -1) |
| goto exit; |
| |
| if (IS_ALDERLAKE_P(dev_priv)) { |
| val |= ADLP_PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1); |
| val |= ADLP_PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(clip->y2 - 1); |
| } else { |
| drm_WARN_ON(crtc_state->uapi.crtc->dev, clip->y1 % 4 || clip->y2 % 4); |
| |
| val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE; |
| val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1); |
| val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(clip->y2 / 4 + 1); |
| } |
| exit: |
| crtc_state->psr2_man_track_ctl = val; |
| } |
| |
| static void clip_area_update(struct drm_rect *overlap_damage_area, |
| struct drm_rect *damage_area) |
| { |
| if (overlap_damage_area->y1 == -1) { |
| overlap_damage_area->y1 = damage_area->y1; |
| overlap_damage_area->y2 = damage_area->y2; |
| return; |
| } |
| |
| if (damage_area->y1 < overlap_damage_area->y1) |
| overlap_damage_area->y1 = damage_area->y1; |
| |
| if (damage_area->y2 > overlap_damage_area->y2) |
| overlap_damage_area->y2 = damage_area->y2; |
| } |
| |
| static void intel_psr2_sel_fetch_pipe_alignment(const struct intel_crtc_state *crtc_state, |
| struct drm_rect *pipe_clip) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| const u16 y_alignment = crtc_state->su_y_granularity; |
| |
| pipe_clip->y1 -= pipe_clip->y1 % y_alignment; |
| if (pipe_clip->y2 % y_alignment) |
| pipe_clip->y2 = ((pipe_clip->y2 / y_alignment) + 1) * y_alignment; |
| |
| if (IS_ALDERLAKE_P(dev_priv) && crtc_state->dsc.compression_enable) |
| drm_warn(&dev_priv->drm, "Missing PSR2 sel fetch alignment with DSC\n"); |
| } |
| |
| /* |
| * TODO: Not clear how to handle planes with negative position, |
| * also planes are not updated if they have a negative X |
| * position so for now doing a full update in this cases |
| * |
| * TODO: We are missing multi-planar formats handling, until it is |
| * implemented it will send full frame updates. |
| * |
| * Plane scaling and rotation is not supported by selective fetch and both |
| * properties can change without a modeset, so need to be check at every |
| * atomic commmit. |
| */ |
| static bool psr2_sel_fetch_plane_state_supported(const struct intel_plane_state *plane_state) |
| { |
| if (plane_state->uapi.dst.y1 < 0 || |
| plane_state->uapi.dst.x1 < 0 || |
| plane_state->scaler_id >= 0 || |
| plane_state->hw.fb->format->num_planes > 1 || |
| plane_state->uapi.rotation != DRM_MODE_ROTATE_0) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * Check for pipe properties that is not supported by selective fetch. |
| * |
| * TODO: pipe scaling causes a modeset but skl_update_scaler_crtc() is executed |
| * after intel_psr_compute_config(), so for now keeping PSR2 selective fetch |
| * enabled and going to the full update path. |
| */ |
| static bool psr2_sel_fetch_pipe_state_supported(const struct intel_crtc_state *crtc_state) |
| { |
| if (crtc_state->scaler_state.scaler_id >= 0) |
| return false; |
| |
| return true; |
| } |
| |
| int intel_psr2_sel_fetch_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_rect pipe_clip = { .x1 = 0, .y1 = -1, .x2 = INT_MAX, .y2 = -1 }; |
| struct intel_plane_state *new_plane_state, *old_plane_state; |
| struct intel_plane *plane; |
| bool full_update = false; |
| int i, ret; |
| |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return 0; |
| |
| if (!psr2_sel_fetch_pipe_state_supported(crtc_state)) { |
| full_update = true; |
| goto skip_sel_fetch_set_loop; |
| } |
| |
| /* |
| * Calculate minimal selective fetch area of each plane and calculate |
| * the pipe damaged area. |
| * In the next loop the plane selective fetch area will actually be set |
| * using whole pipe damaged area. |
| */ |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| struct drm_rect src, damaged_area = { .y1 = -1 }; |
| struct drm_atomic_helper_damage_iter iter; |
| struct drm_rect clip; |
| |
| if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc) |
| continue; |
| |
| if (!new_plane_state->uapi.visible && |
| !old_plane_state->uapi.visible) |
| continue; |
| |
| if (!psr2_sel_fetch_plane_state_supported(new_plane_state)) { |
| full_update = true; |
| break; |
| } |
| |
| /* |
| * If visibility or plane moved, mark the whole plane area as |
| * damaged as it needs to be complete redraw in the new and old |
| * position. |
| */ |
| if (new_plane_state->uapi.visible != old_plane_state->uapi.visible || |
| !drm_rect_equals(&new_plane_state->uapi.dst, |
| &old_plane_state->uapi.dst)) { |
| if (old_plane_state->uapi.visible) { |
| damaged_area.y1 = old_plane_state->uapi.dst.y1; |
| damaged_area.y2 = old_plane_state->uapi.dst.y2; |
| clip_area_update(&pipe_clip, &damaged_area); |
| } |
| |
| if (new_plane_state->uapi.visible) { |
| damaged_area.y1 = new_plane_state->uapi.dst.y1; |
| damaged_area.y2 = new_plane_state->uapi.dst.y2; |
| clip_area_update(&pipe_clip, &damaged_area); |
| } |
| continue; |
| } else if (new_plane_state->uapi.alpha != old_plane_state->uapi.alpha) { |
| /* If alpha changed mark the whole plane area as damaged */ |
| damaged_area.y1 = new_plane_state->uapi.dst.y1; |
| damaged_area.y2 = new_plane_state->uapi.dst.y2; |
| clip_area_update(&pipe_clip, &damaged_area); |
| continue; |
| } |
| |
| drm_rect_fp_to_int(&src, &new_plane_state->uapi.src); |
| |
| drm_atomic_helper_damage_iter_init(&iter, |
| &old_plane_state->uapi, |
| &new_plane_state->uapi); |
| drm_atomic_for_each_plane_damage(&iter, &clip) { |
| if (drm_rect_intersect(&clip, &src)) |
| clip_area_update(&damaged_area, &clip); |
| } |
| |
| if (damaged_area.y1 == -1) |
| continue; |
| |
| damaged_area.y1 += new_plane_state->uapi.dst.y1 - src.y1; |
| damaged_area.y2 += new_plane_state->uapi.dst.y1 - src.y1; |
| clip_area_update(&pipe_clip, &damaged_area); |
| } |
| |
| if (full_update) |
| goto skip_sel_fetch_set_loop; |
| |
| ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); |
| if (ret) |
| return ret; |
| |
| intel_psr2_sel_fetch_pipe_alignment(crtc_state, &pipe_clip); |
| |
| /* |
| * Now that we have the pipe damaged area check if it intersect with |
| * every plane, if it does set the plane selective fetch area. |
| */ |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| struct drm_rect *sel_fetch_area, inter; |
| |
| if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc || |
| !new_plane_state->uapi.visible) |
| continue; |
| |
| inter = pipe_clip; |
| if (!drm_rect_intersect(&inter, &new_plane_state->uapi.dst)) |
| continue; |
| |
| if (!psr2_sel_fetch_plane_state_supported(new_plane_state)) { |
| full_update = true; |
| break; |
| } |
| |
| sel_fetch_area = &new_plane_state->psr2_sel_fetch_area; |
| sel_fetch_area->y1 = inter.y1 - new_plane_state->uapi.dst.y1; |
| sel_fetch_area->y2 = inter.y2 - new_plane_state->uapi.dst.y1; |
| crtc_state->update_planes |= BIT(plane->id); |
| } |
| |
| skip_sel_fetch_set_loop: |
| psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update); |
| return 0; |
| } |
| |
| static void _intel_psr_pre_plane_update(const struct intel_atomic_state *state, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_encoder *encoder; |
| |
| for_each_intel_encoder_mask_with_psr(state->base.dev, encoder, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_psr *psr = &intel_dp->psr; |
| bool needs_to_disable = false; |
| |
| mutex_lock(&psr->lock); |
| |
| /* |
| * Reasons to disable: |
| * - PSR disabled in new state |
| * - All planes will go inactive |
| * - Changing between PSR versions |
| */ |
| needs_to_disable |= !crtc_state->has_psr; |
| needs_to_disable |= !crtc_state->active_planes; |
| needs_to_disable |= crtc_state->has_psr2 != psr->psr2_enabled; |
| |
| if (psr->enabled && needs_to_disable) |
| intel_psr_disable_locked(intel_dp); |
| |
| mutex_unlock(&psr->lock); |
| } |
| } |
| |
| void intel_psr_pre_plane_update(const struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| if (!HAS_PSR(dev_priv)) |
| return; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) |
| _intel_psr_pre_plane_update(state, crtc_state); |
| } |
| |
| static void _intel_psr_post_plane_update(const struct intel_atomic_state *state, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_encoder *encoder; |
| |
| if (!crtc_state->has_psr) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(state->base.dev, encoder, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| mutex_lock(&psr->lock); |
| |
| drm_WARN_ON(&dev_priv->drm, psr->enabled && !crtc_state->active_planes); |
| |
| /* Only enable if there is active planes */ |
| if (!psr->enabled && crtc_state->active_planes) |
| intel_psr_enable_locked(intel_dp, crtc_state); |
| |
| /* Force a PSR exit when enabling CRC to avoid CRC timeouts */ |
| if (crtc_state->crc_enabled && psr->enabled) |
| psr_force_hw_tracking_exit(intel_dp); |
| |
| mutex_unlock(&psr->lock); |
| } |
| } |
| |
| void intel_psr_post_plane_update(const struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| if (!HAS_PSR(dev_priv)) |
| return; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) |
| _intel_psr_post_plane_update(state, crtc_state); |
| } |
| |
| /** |
| * psr_wait_for_idle - wait for PSR1 to idle |
| * @intel_dp: Intel DP |
| * @out_value: PSR status in case of failure |
| * |
| * Returns: 0 on success or -ETIMEOUT if PSR status does not idle. |
| * |
| */ |
| static int psr_wait_for_idle(struct intel_dp *intel_dp, u32 *out_value) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| /* |
| * From bspec: Panel Self Refresh (BDW+) |
| * Max. time for PSR to idle = Inverse of the refresh rate + 6 ms of |
| * exit training time + 1.5 ms of aux channel handshake. 50 ms is |
| * defensive enough to cover everything. |
| */ |
| return __intel_wait_for_register(&dev_priv->uncore, |
| EDP_PSR_STATUS(intel_dp->psr.transcoder), |
| EDP_PSR_STATUS_STATE_MASK, |
| EDP_PSR_STATUS_STATE_IDLE, 2, 50, |
| out_value); |
| } |
| |
| /** |
| * intel_psr_wait_for_idle - wait for PSR1 to idle |
| * @new_crtc_state: new CRTC state |
| * |
| * This function is expected to be called from pipe_update_start() where it is |
| * not expected to race with PSR enable or disable. |
| */ |
| void intel_psr_wait_for_idle(const struct intel_crtc_state *new_crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(new_crtc_state->uapi.crtc->dev); |
| struct intel_encoder *encoder; |
| |
| if (!new_crtc_state->has_psr) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(&dev_priv->drm, encoder, |
| new_crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| u32 psr_status; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled || intel_dp->psr.psr2_enabled) { |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| /* when the PSR1 is enabled */ |
| if (psr_wait_for_idle(intel_dp, &psr_status)) |
| drm_err(&dev_priv->drm, |
| "PSR idle timed out 0x%x, atomic update may fail\n", |
| psr_status); |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| } |
| |
| static bool __psr_wait_for_idle_locked(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| i915_reg_t reg; |
| u32 mask; |
| int err; |
| |
| if (!intel_dp->psr.enabled) |
| return false; |
| |
| if (intel_dp->psr.psr2_enabled) { |
| reg = EDP_PSR2_STATUS(intel_dp->psr.transcoder); |
| mask = EDP_PSR2_STATUS_STATE_MASK; |
| } else { |
| reg = EDP_PSR_STATUS(intel_dp->psr.transcoder); |
| mask = EDP_PSR_STATUS_STATE_MASK; |
| } |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| |
| err = intel_de_wait_for_clear(dev_priv, reg, mask, 50); |
| if (err) |
| drm_err(&dev_priv->drm, |
| "Timed out waiting for PSR Idle for re-enable\n"); |
| |
| /* After the unlocked wait, verify that PSR is still wanted! */ |
| mutex_lock(&intel_dp->psr.lock); |
| return err == 0 && intel_dp->psr.enabled; |
| } |
| |
| static int intel_psr_fastset_force(struct drm_i915_private *dev_priv) |
| { |
| struct drm_connector_list_iter conn_iter; |
| struct drm_device *dev = &dev_priv->drm; |
| struct drm_modeset_acquire_ctx ctx; |
| struct drm_atomic_state *state; |
| struct drm_connector *conn; |
| int err = 0; |
| |
| state = drm_atomic_state_alloc(dev); |
| if (!state) |
| return -ENOMEM; |
| |
| drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); |
| state->acquire_ctx = &ctx; |
| |
| retry: |
| |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| drm_for_each_connector_iter(conn, &conn_iter) { |
| struct drm_connector_state *conn_state; |
| struct drm_crtc_state *crtc_state; |
| |
| if (conn->connector_type != DRM_MODE_CONNECTOR_eDP) |
| continue; |
| |
| conn_state = drm_atomic_get_connector_state(state, conn); |
| if (IS_ERR(conn_state)) { |
| err = PTR_ERR(conn_state); |
| break; |
| } |
| |
| if (!conn_state->crtc) |
| continue; |
| |
| crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc); |
| if (IS_ERR(crtc_state)) { |
| err = PTR_ERR(crtc_state); |
| break; |
| } |
| |
| /* Mark mode as changed to trigger a pipe->update() */ |
| crtc_state->mode_changed = true; |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| if (err == 0) |
| err = drm_atomic_commit(state); |
| |
| if (err == -EDEADLK) { |
| drm_atomic_state_clear(state); |
| err = drm_modeset_backoff(&ctx); |
| if (!err) |
| goto retry; |
| } |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| drm_atomic_state_put(state); |
| |
| return err; |
| } |
| |
| int intel_psr_debug_set(struct intel_dp *intel_dp, u64 val) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| const u32 mode = val & I915_PSR_DEBUG_MODE_MASK; |
| u32 old_mode; |
| int ret; |
| |
| if (val & ~(I915_PSR_DEBUG_IRQ | I915_PSR_DEBUG_MODE_MASK) || |
| mode > I915_PSR_DEBUG_ENABLE_SEL_FETCH) { |
| drm_dbg_kms(&dev_priv->drm, "Invalid debug mask %llx\n", val); |
| return -EINVAL; |
| } |
| |
| ret = mutex_lock_interruptible(&intel_dp->psr.lock); |
| if (ret) |
| return ret; |
| |
| old_mode = intel_dp->psr.debug & I915_PSR_DEBUG_MODE_MASK; |
| intel_dp->psr.debug = val; |
| |
| /* |
| * Do it right away if it's already enabled, otherwise it will be done |
| * when enabling the source. |
| */ |
| if (intel_dp->psr.enabled) |
| psr_irq_control(intel_dp); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| |
| if (old_mode != mode) |
| ret = intel_psr_fastset_force(dev_priv); |
| |
| return ret; |
| } |
| |
| static void intel_psr_handle_irq(struct intel_dp *intel_dp) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| /* let's make sure that sink is awaken */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); |
| } |
| |
| static void intel_psr_work(struct work_struct *work) |
| { |
| struct intel_dp *intel_dp = |
| container_of(work, typeof(*intel_dp), psr.work); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| |
| if (!intel_dp->psr.enabled) |
| goto unlock; |
| |
| if (READ_ONCE(intel_dp->psr.irq_aux_error)) |
| intel_psr_handle_irq(intel_dp); |
| |
| /* |
| * We have to make sure PSR is ready for re-enable |
| * otherwise it keeps disabled until next full enable/disable cycle. |
| * PSR might take some time to get fully disabled |
| * and be ready for re-enable. |
| */ |
| if (!__psr_wait_for_idle_locked(intel_dp)) |
| goto unlock; |
| |
| /* |
| * The delayed work can race with an invalidate hence we need to |
| * recheck. Since psr_flush first clears this and then reschedules we |
| * won't ever miss a flush when bailing out here. |
| */ |
| if (intel_dp->psr.busy_frontbuffer_bits || intel_dp->psr.active) |
| goto unlock; |
| |
| intel_psr_activate(intel_dp); |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| |
| /** |
| * intel_psr_invalidate - Invalidade PSR |
| * @dev_priv: i915 device |
| * @frontbuffer_bits: frontbuffer plane tracking bits |
| * @origin: which operation caused the invalidate |
| * |
| * Since the hardware frontbuffer tracking has gaps we need to integrate |
| * with the software frontbuffer tracking. This function gets called every |
| * time frontbuffer rendering starts and a buffer gets dirtied. PSR must be |
| * disabled if the frontbuffer mask contains a buffer relevant to PSR. |
| * |
| * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits." |
| */ |
| void intel_psr_invalidate(struct drm_i915_private *dev_priv, |
| unsigned frontbuffer_bits, enum fb_op_origin origin) |
| { |
| struct intel_encoder *encoder; |
| |
| if (origin == ORIGIN_FLIP) |
| return; |
| |
| for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) { |
| unsigned int pipe_frontbuffer_bits = frontbuffer_bits; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled) { |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| pipe_frontbuffer_bits &= |
| INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe); |
| intel_dp->psr.busy_frontbuffer_bits |= pipe_frontbuffer_bits; |
| |
| if (pipe_frontbuffer_bits) |
| intel_psr_exit(intel_dp); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| } |
| /* |
| * When we will be completely rely on PSR2 S/W tracking in future, |
| * intel_psr_flush() will invalidate and flush the PSR for ORIGIN_FLIP |
| * event also therefore tgl_dc3co_flush_locked() require to be changed |
| * accordingly in future. |
| */ |
| static void |
| tgl_dc3co_flush_locked(struct intel_dp *intel_dp, unsigned int frontbuffer_bits, |
| enum fb_op_origin origin) |
| { |
| if (!intel_dp->psr.dc3co_exitline || !intel_dp->psr.psr2_enabled || |
| !intel_dp->psr.active) |
| return; |
| |
| /* |
| * At every frontbuffer flush flip event modified delay of delayed work, |
| * when delayed work schedules that means display has been idle. |
| */ |
| if (!(frontbuffer_bits & |
| INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe))) |
| return; |
| |
| tgl_psr2_enable_dc3co(intel_dp); |
| mod_delayed_work(system_wq, &intel_dp->psr.dc3co_work, |
| intel_dp->psr.dc3co_exit_delay); |
| } |
| |
| /** |
| * intel_psr_flush - Flush PSR |
| * @dev_priv: i915 device |
| * @frontbuffer_bits: frontbuffer plane tracking bits |
| * @origin: which operation caused the flush |
| * |
| * Since the hardware frontbuffer tracking has gaps we need to integrate |
| * with the software frontbuffer tracking. This function gets called every |
| * time frontbuffer rendering has completed and flushed out to memory. PSR |
| * can be enabled again if no other frontbuffer relevant to PSR is dirty. |
| * |
| * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits. |
| */ |
| void intel_psr_flush(struct drm_i915_private *dev_priv, |
| unsigned frontbuffer_bits, enum fb_op_origin origin) |
| { |
| struct intel_encoder *encoder; |
| |
| for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) { |
| unsigned int pipe_frontbuffer_bits = frontbuffer_bits; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled) { |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| pipe_frontbuffer_bits &= |
| INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe); |
| intel_dp->psr.busy_frontbuffer_bits &= ~pipe_frontbuffer_bits; |
| |
| /* |
| * If the PSR is paused by an explicit intel_psr_paused() call, |
| * we have to ensure that the PSR is not activated until |
| * intel_psr_resume() is called. |
| */ |
| if (intel_dp->psr.paused) { |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| if (origin == ORIGIN_FLIP || |
| (origin == ORIGIN_CURSOR_UPDATE && |
| !intel_dp->psr.psr2_sel_fetch_enabled)) { |
| tgl_dc3co_flush_locked(intel_dp, frontbuffer_bits, origin); |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| /* By definition flush = invalidate + flush */ |
| if (pipe_frontbuffer_bits) |
| psr_force_hw_tracking_exit(intel_dp); |
| |
| if (!intel_dp->psr.active && !intel_dp->psr.busy_frontbuffer_bits) |
| schedule_work(&intel_dp->psr.work); |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| } |
| |
| /** |
| * intel_psr_init - Init basic PSR work and mutex. |
| * @intel_dp: Intel DP |
| * |
| * This function is called after the initializing connector. |
| * (the initializing of connector treats the handling of connector capabilities) |
| * And it initializes basic PSR stuff for each DP Encoder. |
| */ |
| void intel_psr_init(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| if (!HAS_PSR(dev_priv)) |
| return; |
| |
| /* |
| * HSW spec explicitly says PSR is tied to port A. |
| * BDW+ platforms have a instance of PSR registers per transcoder but |
| * BDW, GEN9 and GEN11 are not validated by HW team in other transcoder |
| * than eDP one. |
| * For now it only supports one instance of PSR for BDW, GEN9 and GEN11. |
| * So lets keep it hardcoded to PORT_A for BDW, GEN9 and GEN11. |
| * But GEN12 supports a instance of PSR registers per transcoder. |
| */ |
| if (DISPLAY_VER(dev_priv) < 12 && dig_port->base.port != PORT_A) { |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR condition failed: Port not supported\n"); |
| return; |
| } |
| |
| intel_dp->psr.source_support = true; |
| |
| if (dev_priv->params.enable_psr == -1) |
| if (!dev_priv->vbt.psr.enable) |
| dev_priv->params.enable_psr = 0; |
| |
| /* Set link_standby x link_off defaults */ |
| if (DISPLAY_VER(dev_priv) < 12) |
| /* For new platforms up to TGL let's respect VBT back again */ |
| intel_dp->psr.link_standby = dev_priv->vbt.psr.full_link; |
| |
| INIT_WORK(&intel_dp->psr.work, intel_psr_work); |
| INIT_DELAYED_WORK(&intel_dp->psr.dc3co_work, tgl_dc3co_disable_work); |
| mutex_init(&intel_dp->psr.lock); |
| } |
| |
| static int psr_get_status_and_error_status(struct intel_dp *intel_dp, |
| u8 *status, u8 *error_status) |
| { |
| struct drm_dp_aux *aux = &intel_dp->aux; |
| int ret; |
| |
| ret = drm_dp_dpcd_readb(aux, DP_PSR_STATUS, status); |
| if (ret != 1) |
| return ret; |
| |
| ret = drm_dp_dpcd_readb(aux, DP_PSR_ERROR_STATUS, error_status); |
| if (ret != 1) |
| return ret; |
| |
| *status = *status & DP_PSR_SINK_STATE_MASK; |
| |
| return 0; |
| } |
| |
| static void psr_alpm_check(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| struct drm_dp_aux *aux = &intel_dp->aux; |
| struct intel_psr *psr = &intel_dp->psr; |
| u8 val; |
| int r; |
| |
| if (!psr->psr2_enabled) |
| return; |
| |
| r = drm_dp_dpcd_readb(aux, DP_RECEIVER_ALPM_STATUS, &val); |
| if (r != 1) { |
| drm_err(&dev_priv->drm, "Error reading ALPM status\n"); |
| return; |
| } |
| |
| if (val & DP_ALPM_LOCK_TIMEOUT_ERROR) { |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| drm_dbg_kms(&dev_priv->drm, |
| "ALPM lock timeout error, disabling PSR\n"); |
| |
| /* Clearing error */ |
| drm_dp_dpcd_writeb(aux, DP_RECEIVER_ALPM_STATUS, val); |
| } |
| } |
| |
| static void psr_capability_changed_check(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| struct intel_psr *psr = &intel_dp->psr; |
| u8 val; |
| int r; |
| |
| r = drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_ESI, &val); |
| if (r != 1) { |
| drm_err(&dev_priv->drm, "Error reading DP_PSR_ESI\n"); |
| return; |
| } |
| |
| if (val & DP_PSR_CAPS_CHANGE) { |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| drm_dbg_kms(&dev_priv->drm, |
| "Sink PSR capability changed, disabling PSR\n"); |
| |
| /* Clearing it */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ESI, val); |
| } |
| } |
| |
| void intel_psr_short_pulse(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| struct intel_psr *psr = &intel_dp->psr; |
| u8 status, error_status; |
| const u8 errors = DP_PSR_RFB_STORAGE_ERROR | |
| DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR | |
| DP_PSR_LINK_CRC_ERROR; |
| |
| if (!CAN_PSR(intel_dp)) |
| return; |
| |
| mutex_lock(&psr->lock); |
| |
| if (!psr->enabled) |
| goto exit; |
| |
| if (psr_get_status_and_error_status(intel_dp, &status, &error_status)) { |
| drm_err(&dev_priv->drm, |
| "Error reading PSR status or error status\n"); |
| goto exit; |
| } |
| |
| if (status == DP_PSR_SINK_INTERNAL_ERROR || (error_status & errors)) { |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| } |
| |
| if (status == DP_PSR_SINK_INTERNAL_ERROR && !error_status) |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR sink internal error, disabling PSR\n"); |
| if (error_status & DP_PSR_RFB_STORAGE_ERROR) |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR RFB storage error, disabling PSR\n"); |
| if (error_status & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR) |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR VSC SDP uncorrectable error, disabling PSR\n"); |
| if (error_status & DP_PSR_LINK_CRC_ERROR) |
| drm_dbg_kms(&dev_priv->drm, |
| "PSR Link CRC error, disabling PSR\n"); |
| |
| if (error_status & ~errors) |
| drm_err(&dev_priv->drm, |
| "PSR_ERROR_STATUS unhandled errors %x\n", |
| error_status & ~errors); |
| /* clear status register */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ERROR_STATUS, error_status); |
| |
| psr_alpm_check(intel_dp); |
| psr_capability_changed_check(intel_dp); |
| |
| exit: |
| mutex_unlock(&psr->lock); |
| } |
| |
| bool intel_psr_enabled(struct intel_dp *intel_dp) |
| { |
| bool ret; |
| |
| if (!CAN_PSR(intel_dp)) |
| return false; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| ret = intel_dp->psr.enabled; |
| mutex_unlock(&intel_dp->psr.lock); |
| |
| return ret; |
| } |