| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2020,2021 Intel Corporation |
| */ |
| |
| #include "i915_drv.h" |
| #include "intel_step.h" |
| |
| /* |
| * Some platforms have unusual ways of mapping PCI revision ID to GT/display |
| * steppings. E.g., in some cases a higher PCI revision may translate to a |
| * lower stepping of the GT and/or display IP. This file provides lookup |
| * tables to map the PCI revision into a standard set of stepping values that |
| * can be compared numerically. |
| * |
| * Also note that some revisions/steppings may have been set aside as |
| * placeholders but never materialized in real hardware; in those cases there |
| * may be jumps in the revision IDs or stepping values in the tables below. |
| */ |
| |
| /* |
| * Some platforms always have the same stepping value for GT and display; |
| * use a macro to define these to make it easier to identify the platforms |
| * where the two steppings can deviate. |
| */ |
| #define COMMON_STEP(x) .graphics_step = STEP_##x, .display_step = STEP_##x, .media_step = STEP_##x |
| #define COMMON_GT_MEDIA_STEP(x) .graphics_step = STEP_##x, .media_step = STEP_##x |
| |
| static const struct intel_step_info skl_revids[] = { |
| [0x6] = { COMMON_STEP(G0) }, |
| [0x7] = { COMMON_STEP(H0) }, |
| [0x9] = { COMMON_STEP(J0) }, |
| [0xA] = { COMMON_STEP(I1) }, |
| }; |
| |
| static const struct intel_step_info kbl_revids[] = { |
| [1] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 }, |
| [2] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_B0 }, |
| [3] = { COMMON_GT_MEDIA_STEP(D0), .display_step = STEP_B0 }, |
| [4] = { COMMON_GT_MEDIA_STEP(F0), .display_step = STEP_C0 }, |
| [5] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_B1 }, |
| [6] = { COMMON_GT_MEDIA_STEP(D1), .display_step = STEP_B1 }, |
| [7] = { COMMON_GT_MEDIA_STEP(G0), .display_step = STEP_C0 }, |
| }; |
| |
| static const struct intel_step_info bxt_revids[] = { |
| [0xA] = { COMMON_STEP(C0) }, |
| [0xB] = { COMMON_STEP(C0) }, |
| [0xC] = { COMMON_STEP(D0) }, |
| [0xD] = { COMMON_STEP(E0) }, |
| }; |
| |
| static const struct intel_step_info glk_revids[] = { |
| [3] = { COMMON_STEP(B0) }, |
| }; |
| |
| static const struct intel_step_info icl_revids[] = { |
| [7] = { COMMON_STEP(D0) }, |
| }; |
| |
| static const struct intel_step_info jsl_ehl_revids[] = { |
| [0] = { COMMON_STEP(A0) }, |
| [1] = { COMMON_STEP(B0) }, |
| }; |
| |
| static const struct intel_step_info tgl_uy_revids[] = { |
| [0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 }, |
| [1] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_C0 }, |
| [2] = { COMMON_GT_MEDIA_STEP(B1), .display_step = STEP_C0 }, |
| [3] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_D0 }, |
| }; |
| |
| /* Same GT stepping between tgl_uy_revids and tgl_revids don't mean the same HW */ |
| static const struct intel_step_info tgl_revids[] = { |
| [0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_B0 }, |
| [1] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_D0 }, |
| }; |
| |
| static const struct intel_step_info rkl_revids[] = { |
| [0] = { COMMON_STEP(A0) }, |
| [1] = { COMMON_STEP(B0) }, |
| [4] = { COMMON_STEP(C0) }, |
| }; |
| |
| static const struct intel_step_info dg1_revids[] = { |
| [0] = { COMMON_STEP(A0) }, |
| [1] = { COMMON_STEP(B0) }, |
| }; |
| |
| static const struct intel_step_info adls_revids[] = { |
| [0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 }, |
| [0x1] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A2 }, |
| [0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 }, |
| [0x8] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_B0 }, |
| [0xC] = { COMMON_GT_MEDIA_STEP(D0), .display_step = STEP_C0 }, |
| }; |
| |
| static const struct intel_step_info adlp_revids[] = { |
| [0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 }, |
| [0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 }, |
| [0x8] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_C0 }, |
| [0xC] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_D0 }, |
| }; |
| |
| static const struct intel_step_info xehpsdv_revids[] = { |
| [0x0] = { COMMON_GT_MEDIA_STEP(A0) }, |
| [0x1] = { COMMON_GT_MEDIA_STEP(A1) }, |
| [0x4] = { COMMON_GT_MEDIA_STEP(B0) }, |
| [0x8] = { COMMON_GT_MEDIA_STEP(C0) }, |
| }; |
| |
| static const struct intel_step_info dg2_g10_revid_step_tbl[] = { |
| [0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_A0 }, |
| [0x1] = { COMMON_GT_MEDIA_STEP(A1), .display_step = STEP_A0 }, |
| [0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_B0 }, |
| [0x8] = { COMMON_GT_MEDIA_STEP(C0), .display_step = STEP_C0 }, |
| }; |
| |
| static const struct intel_step_info dg2_g11_revid_step_tbl[] = { |
| [0x0] = { COMMON_GT_MEDIA_STEP(A0), .display_step = STEP_B0 }, |
| [0x4] = { COMMON_GT_MEDIA_STEP(B0), .display_step = STEP_C0 }, |
| [0x5] = { COMMON_GT_MEDIA_STEP(B1), .display_step = STEP_C0 }, |
| }; |
| |
| void intel_step_init(struct drm_i915_private *i915) |
| { |
| const struct intel_step_info *revids = NULL; |
| int size = 0; |
| int revid = INTEL_REVID(i915); |
| struct intel_step_info step = {}; |
| |
| if (IS_DG2_G10(i915)) { |
| revids = dg2_g10_revid_step_tbl; |
| size = ARRAY_SIZE(dg2_g10_revid_step_tbl); |
| } else if (IS_DG2_G11(i915)) { |
| revids = dg2_g11_revid_step_tbl; |
| size = ARRAY_SIZE(dg2_g11_revid_step_tbl); |
| } else if (IS_XEHPSDV(i915)) { |
| revids = xehpsdv_revids; |
| size = ARRAY_SIZE(xehpsdv_revids); |
| } else if (IS_ALDERLAKE_P(i915)) { |
| revids = adlp_revids; |
| size = ARRAY_SIZE(adlp_revids); |
| } else if (IS_ALDERLAKE_S(i915)) { |
| revids = adls_revids; |
| size = ARRAY_SIZE(adls_revids); |
| } else if (IS_DG1(i915)) { |
| revids = dg1_revids; |
| size = ARRAY_SIZE(dg1_revids); |
| } else if (IS_ROCKETLAKE(i915)) { |
| revids = rkl_revids; |
| size = ARRAY_SIZE(rkl_revids); |
| } else if (IS_TGL_U(i915) || IS_TGL_Y(i915)) { |
| revids = tgl_uy_revids; |
| size = ARRAY_SIZE(tgl_uy_revids); |
| } else if (IS_TIGERLAKE(i915)) { |
| revids = tgl_revids; |
| size = ARRAY_SIZE(tgl_revids); |
| } else if (IS_JSL_EHL(i915)) { |
| revids = jsl_ehl_revids; |
| size = ARRAY_SIZE(jsl_ehl_revids); |
| } else if (IS_ICELAKE(i915)) { |
| revids = icl_revids; |
| size = ARRAY_SIZE(icl_revids); |
| } else if (IS_GEMINILAKE(i915)) { |
| revids = glk_revids; |
| size = ARRAY_SIZE(glk_revids); |
| } else if (IS_BROXTON(i915)) { |
| revids = bxt_revids; |
| size = ARRAY_SIZE(bxt_revids); |
| } else if (IS_KABYLAKE(i915)) { |
| revids = kbl_revids; |
| size = ARRAY_SIZE(kbl_revids); |
| } else if (IS_SKYLAKE(i915)) { |
| revids = skl_revids; |
| size = ARRAY_SIZE(skl_revids); |
| } |
| |
| /* Not using the stepping scheme for the platform yet. */ |
| if (!revids) |
| return; |
| |
| if (revid < size && revids[revid].graphics_step != STEP_NONE) { |
| step = revids[revid]; |
| } else { |
| drm_warn(&i915->drm, "Unknown revid 0x%02x\n", revid); |
| |
| /* |
| * If we hit a gap in the revid array, use the information for |
| * the next revid. |
| * |
| * This may be wrong in all sorts of ways, especially if the |
| * steppings in the array are not monotonically increasing, but |
| * it's better than defaulting to 0. |
| */ |
| while (revid < size && revids[revid].graphics_step == STEP_NONE) |
| revid++; |
| |
| if (revid < size) { |
| drm_dbg(&i915->drm, "Using steppings for revid 0x%02x\n", |
| revid); |
| step = revids[revid]; |
| } else { |
| drm_dbg(&i915->drm, "Using future steppings\n"); |
| step.graphics_step = STEP_FUTURE; |
| step.display_step = STEP_FUTURE; |
| } |
| } |
| |
| if (drm_WARN_ON(&i915->drm, step.graphics_step == STEP_NONE)) |
| return; |
| |
| RUNTIME_INFO(i915)->step = step; |
| } |
| |
| #define STEP_NAME_CASE(name) \ |
| case STEP_##name: \ |
| return #name; |
| |
| const char *intel_step_name(enum intel_step step) |
| { |
| switch (step) { |
| STEP_NAME_LIST(STEP_NAME_CASE); |
| |
| default: |
| return "**"; |
| } |
| } |