| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Generic DSI Command Mode panel driver |
| * |
| * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/jiffies.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <drm/drm_connector.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| #include <video/mipi_display.h> |
| |
| #define DCS_GET_ID1 0xda |
| #define DCS_GET_ID2 0xdb |
| #define DCS_GET_ID3 0xdc |
| |
| #define DCS_REGULATOR_SUPPLY_NUM 2 |
| |
| static const struct of_device_id dsicm_of_match[]; |
| |
| struct dsic_panel_data { |
| u32 xres; |
| u32 yres; |
| u32 refresh; |
| u32 width_mm; |
| u32 height_mm; |
| u32 max_hs_rate; |
| u32 max_lp_rate; |
| bool te_support; |
| }; |
| |
| struct panel_drv_data { |
| struct mipi_dsi_device *dsi; |
| struct drm_panel panel; |
| struct drm_display_mode mode; |
| |
| struct mutex lock; |
| |
| struct backlight_device *bldev; |
| struct backlight_device *extbldev; |
| |
| unsigned long hw_guard_end; /* next value of jiffies when we can |
| * issue the next sleep in/out command |
| */ |
| unsigned long hw_guard_wait; /* max guard time in jiffies */ |
| |
| const struct dsic_panel_data *panel_data; |
| |
| struct gpio_desc *reset_gpio; |
| |
| struct regulator_bulk_data supplies[DCS_REGULATOR_SUPPLY_NUM]; |
| |
| bool use_dsi_backlight; |
| |
| /* runtime variables */ |
| bool enabled; |
| |
| bool intro_printed; |
| }; |
| |
| static inline struct panel_drv_data *panel_to_ddata(struct drm_panel *panel) |
| { |
| return container_of(panel, struct panel_drv_data, panel); |
| } |
| |
| static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) |
| { |
| struct backlight_device *backlight; |
| |
| if (ddata->bldev) |
| backlight = ddata->bldev; |
| else if (ddata->extbldev) |
| backlight = ddata->extbldev; |
| else |
| return; |
| |
| if (enable) { |
| backlight->props.fb_blank = FB_BLANK_UNBLANK; |
| backlight->props.state = ~(BL_CORE_FBBLANK | BL_CORE_SUSPENDED); |
| backlight->props.power = FB_BLANK_UNBLANK; |
| } else { |
| backlight->props.fb_blank = FB_BLANK_NORMAL; |
| backlight->props.power = FB_BLANK_POWERDOWN; |
| backlight->props.state |= BL_CORE_FBBLANK | BL_CORE_SUSPENDED; |
| } |
| |
| backlight_update_status(backlight); |
| } |
| |
| static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec) |
| { |
| ddata->hw_guard_wait = msecs_to_jiffies(guard_msec); |
| ddata->hw_guard_end = jiffies + ddata->hw_guard_wait; |
| } |
| |
| static void hw_guard_wait(struct panel_drv_data *ddata) |
| { |
| unsigned long wait = ddata->hw_guard_end - jiffies; |
| |
| if ((long)wait > 0 && wait <= ddata->hw_guard_wait) { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| schedule_timeout(wait); |
| } |
| } |
| |
| static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data) |
| { |
| return mipi_dsi_dcs_read(ddata->dsi, dcs_cmd, data, 1); |
| } |
| |
| static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param) |
| { |
| return mipi_dsi_dcs_write(ddata->dsi, dcs_cmd, ¶m, 1); |
| } |
| |
| static int dsicm_sleep_in(struct panel_drv_data *ddata) |
| |
| { |
| int r; |
| |
| hw_guard_wait(ddata); |
| |
| r = mipi_dsi_dcs_enter_sleep_mode(ddata->dsi); |
| if (r) |
| return r; |
| |
| hw_guard_start(ddata, 120); |
| |
| usleep_range(5000, 10000); |
| |
| return 0; |
| } |
| |
| static int dsicm_sleep_out(struct panel_drv_data *ddata) |
| { |
| int r; |
| |
| hw_guard_wait(ddata); |
| |
| r = mipi_dsi_dcs_exit_sleep_mode(ddata->dsi); |
| if (r) |
| return r; |
| |
| hw_guard_start(ddata, 120); |
| |
| usleep_range(5000, 10000); |
| |
| return 0; |
| } |
| |
| static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3) |
| { |
| int r; |
| |
| r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1); |
| if (r) |
| return r; |
| r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2); |
| if (r) |
| return r; |
| r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| static int dsicm_set_update_window(struct panel_drv_data *ddata) |
| { |
| struct mipi_dsi_device *dsi = ddata->dsi; |
| int r; |
| |
| r = mipi_dsi_dcs_set_column_address(dsi, 0, ddata->mode.hdisplay - 1); |
| if (r < 0) |
| return r; |
| |
| r = mipi_dsi_dcs_set_page_address(dsi, 0, ddata->mode.vdisplay - 1); |
| if (r < 0) |
| return r; |
| |
| return 0; |
| } |
| |
| static int dsicm_bl_update_status(struct backlight_device *dev) |
| { |
| struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); |
| int r = 0; |
| int level; |
| |
| if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| dev->props.power == FB_BLANK_UNBLANK) |
| level = dev->props.brightness; |
| else |
| level = 0; |
| |
| dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level); |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) |
| r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, |
| level); |
| |
| mutex_unlock(&ddata->lock); |
| |
| return r; |
| } |
| |
| static int dsicm_bl_get_intensity(struct backlight_device *dev) |
| { |
| if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| dev->props.power == FB_BLANK_UNBLANK) |
| return dev->props.brightness; |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops dsicm_bl_ops = { |
| .get_brightness = dsicm_bl_get_intensity, |
| .update_status = dsicm_bl_update_status, |
| }; |
| |
| static ssize_t num_dsi_errors_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct panel_drv_data *ddata = dev_get_drvdata(dev); |
| u8 errors = 0; |
| int r = -ENODEV; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) |
| r = dsicm_dcs_read_1(ddata, MIPI_DCS_GET_ERROR_COUNT_ON_DSI, &errors); |
| |
| mutex_unlock(&ddata->lock); |
| |
| if (r) |
| return r; |
| |
| return sysfs_emit(buf, "%d\n", errors); |
| } |
| |
| static ssize_t hw_revision_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct panel_drv_data *ddata = dev_get_drvdata(dev); |
| u8 id1, id2, id3; |
| int r = -ENODEV; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) |
| r = dsicm_get_id(ddata, &id1, &id2, &id3); |
| |
| mutex_unlock(&ddata->lock); |
| |
| if (r) |
| return r; |
| |
| return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3); |
| } |
| |
| static DEVICE_ATTR_RO(num_dsi_errors); |
| static DEVICE_ATTR_RO(hw_revision); |
| |
| static struct attribute *dsicm_attrs[] = { |
| &dev_attr_num_dsi_errors.attr, |
| &dev_attr_hw_revision.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group dsicm_attr_group = { |
| .attrs = dsicm_attrs, |
| }; |
| |
| static void dsicm_hw_reset(struct panel_drv_data *ddata) |
| { |
| gpiod_set_value(ddata->reset_gpio, 1); |
| udelay(10); |
| /* reset the panel */ |
| gpiod_set_value(ddata->reset_gpio, 0); |
| /* assert reset */ |
| udelay(10); |
| gpiod_set_value(ddata->reset_gpio, 1); |
| /* wait after releasing reset */ |
| usleep_range(5000, 10000); |
| } |
| |
| static int dsicm_power_on(struct panel_drv_data *ddata) |
| { |
| u8 id1, id2, id3; |
| int r; |
| |
| dsicm_hw_reset(ddata); |
| |
| ddata->dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| r = dsicm_sleep_out(ddata); |
| if (r) |
| goto err; |
| |
| r = dsicm_get_id(ddata, &id1, &id2, &id3); |
| if (r) |
| goto err; |
| |
| r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0xff); |
| if (r) |
| goto err; |
| |
| r = dsicm_dcs_write_1(ddata, MIPI_DCS_WRITE_CONTROL_DISPLAY, |
| (1<<2) | (1<<5)); /* BL | BCTRL */ |
| if (r) |
| goto err; |
| |
| r = mipi_dsi_dcs_set_pixel_format(ddata->dsi, MIPI_DCS_PIXEL_FMT_24BIT); |
| if (r) |
| goto err; |
| |
| r = dsicm_set_update_window(ddata); |
| if (r) |
| goto err; |
| |
| r = mipi_dsi_dcs_set_display_on(ddata->dsi); |
| if (r) |
| goto err; |
| |
| if (ddata->panel_data->te_support) { |
| r = mipi_dsi_dcs_set_tear_on(ddata->dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); |
| if (r) |
| goto err; |
| } |
| |
| /* possible panel bug */ |
| msleep(100); |
| |
| ddata->enabled = true; |
| |
| if (!ddata->intro_printed) { |
| dev_info(&ddata->dsi->dev, "panel revision %02x.%02x.%02x\n", |
| id1, id2, id3); |
| ddata->intro_printed = true; |
| } |
| |
| ddata->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| return 0; |
| err: |
| dev_err(&ddata->dsi->dev, "error while enabling panel, issuing HW reset\n"); |
| |
| dsicm_hw_reset(ddata); |
| |
| return r; |
| } |
| |
| static int dsicm_power_off(struct panel_drv_data *ddata) |
| { |
| int r; |
| |
| ddata->enabled = false; |
| |
| r = mipi_dsi_dcs_set_display_off(ddata->dsi); |
| if (!r) |
| r = dsicm_sleep_in(ddata); |
| |
| if (r) { |
| dev_err(&ddata->dsi->dev, |
| "error disabling panel, issuing HW reset\n"); |
| dsicm_hw_reset(ddata); |
| } |
| |
| return r; |
| } |
| |
| static int dsicm_prepare(struct drm_panel *panel) |
| { |
| struct panel_drv_data *ddata = panel_to_ddata(panel); |
| int r; |
| |
| r = regulator_bulk_enable(ARRAY_SIZE(ddata->supplies), ddata->supplies); |
| if (r) |
| dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r); |
| |
| return r; |
| } |
| |
| static int dsicm_enable(struct drm_panel *panel) |
| { |
| struct panel_drv_data *ddata = panel_to_ddata(panel); |
| int r; |
| |
| mutex_lock(&ddata->lock); |
| |
| r = dsicm_power_on(ddata); |
| if (r) |
| goto err; |
| |
| mutex_unlock(&ddata->lock); |
| |
| dsicm_bl_power(ddata, true); |
| |
| return 0; |
| err: |
| dev_err(&ddata->dsi->dev, "enable failed (%d)\n", r); |
| mutex_unlock(&ddata->lock); |
| return r; |
| } |
| |
| static int dsicm_unprepare(struct drm_panel *panel) |
| { |
| struct panel_drv_data *ddata = panel_to_ddata(panel); |
| int r; |
| |
| r = regulator_bulk_disable(ARRAY_SIZE(ddata->supplies), ddata->supplies); |
| if (r) |
| dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r); |
| |
| return r; |
| } |
| |
| static int dsicm_disable(struct drm_panel *panel) |
| { |
| struct panel_drv_data *ddata = panel_to_ddata(panel); |
| int r; |
| |
| dsicm_bl_power(ddata, false); |
| |
| mutex_lock(&ddata->lock); |
| |
| r = dsicm_power_off(ddata); |
| |
| mutex_unlock(&ddata->lock); |
| |
| return r; |
| } |
| |
| static int dsicm_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct panel_drv_data *ddata = panel_to_ddata(panel); |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &ddata->mode); |
| if (!mode) { |
| dev_err(&ddata->dsi->dev, "failed to add mode %ux%ux@%u kHz\n", |
| ddata->mode.hdisplay, ddata->mode.vdisplay, |
| ddata->mode.clock); |
| return -ENOMEM; |
| } |
| |
| connector->display_info.width_mm = ddata->panel_data->width_mm; |
| connector->display_info.height_mm = ddata->panel_data->height_mm; |
| |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs dsicm_panel_funcs = { |
| .unprepare = dsicm_unprepare, |
| .disable = dsicm_disable, |
| .prepare = dsicm_prepare, |
| .enable = dsicm_enable, |
| .get_modes = dsicm_get_modes, |
| }; |
| |
| static int dsicm_probe_of(struct mipi_dsi_device *dsi) |
| { |
| struct backlight_device *backlight; |
| struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi); |
| int err; |
| struct drm_display_mode *mode = &ddata->mode; |
| |
| ddata->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(ddata->reset_gpio)) { |
| err = PTR_ERR(ddata->reset_gpio); |
| dev_err(&dsi->dev, "reset gpio request failed: %d", err); |
| return err; |
| } |
| |
| mode->hdisplay = mode->hsync_start = mode->hsync_end = mode->htotal = |
| ddata->panel_data->xres; |
| mode->vdisplay = mode->vsync_start = mode->vsync_end = mode->vtotal = |
| ddata->panel_data->yres; |
| mode->clock = ddata->panel_data->xres * ddata->panel_data->yres * |
| ddata->panel_data->refresh / 1000; |
| mode->width_mm = ddata->panel_data->width_mm; |
| mode->height_mm = ddata->panel_data->height_mm; |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; |
| drm_mode_set_name(mode); |
| |
| ddata->supplies[0].supply = "vpnl"; |
| ddata->supplies[1].supply = "vddi"; |
| err = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ddata->supplies), |
| ddata->supplies); |
| if (err) |
| return err; |
| |
| backlight = devm_of_find_backlight(&dsi->dev); |
| if (IS_ERR(backlight)) |
| return PTR_ERR(backlight); |
| |
| /* If no backlight device is found assume native backlight support */ |
| if (backlight) |
| ddata->extbldev = backlight; |
| else |
| ddata->use_dsi_backlight = true; |
| |
| return 0; |
| } |
| |
| static int dsicm_probe(struct mipi_dsi_device *dsi) |
| { |
| struct panel_drv_data *ddata; |
| struct backlight_device *bldev = NULL; |
| struct device *dev = &dsi->dev; |
| int r; |
| |
| dev_dbg(dev, "probe\n"); |
| |
| ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, ddata); |
| ddata->dsi = dsi; |
| |
| ddata->panel_data = of_device_get_match_data(dev); |
| if (!ddata->panel_data) |
| return -ENODEV; |
| |
| r = dsicm_probe_of(dsi); |
| if (r) |
| return r; |
| |
| mutex_init(&ddata->lock); |
| |
| dsicm_hw_reset(ddata); |
| |
| drm_panel_init(&ddata->panel, dev, &dsicm_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| if (ddata->use_dsi_backlight) { |
| struct backlight_properties props = { 0 }; |
| props.max_brightness = 255; |
| props.type = BACKLIGHT_RAW; |
| |
| bldev = devm_backlight_device_register(dev, dev_name(dev), |
| dev, ddata, &dsicm_bl_ops, &props); |
| if (IS_ERR(bldev)) { |
| r = PTR_ERR(bldev); |
| goto err_bl; |
| } |
| |
| ddata->bldev = bldev; |
| } |
| |
| r = sysfs_create_group(&dev->kobj, &dsicm_attr_group); |
| if (r) { |
| dev_err(dev, "failed to create sysfs files\n"); |
| goto err_bl; |
| } |
| |
| dsi->lanes = 2; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS | |
| MIPI_DSI_MODE_NO_EOT_PACKET; |
| dsi->hs_rate = ddata->panel_data->max_hs_rate; |
| dsi->lp_rate = ddata->panel_data->max_lp_rate; |
| |
| drm_panel_add(&ddata->panel); |
| |
| r = mipi_dsi_attach(dsi); |
| if (r < 0) |
| goto err_dsi_attach; |
| |
| return 0; |
| |
| err_dsi_attach: |
| drm_panel_remove(&ddata->panel); |
| sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group); |
| err_bl: |
| if (ddata->extbldev) |
| put_device(&ddata->extbldev->dev); |
| |
| return r; |
| } |
| |
| static int dsicm_remove(struct mipi_dsi_device *dsi) |
| { |
| struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi); |
| |
| dev_dbg(&dsi->dev, "remove\n"); |
| |
| mipi_dsi_detach(dsi); |
| |
| drm_panel_remove(&ddata->panel); |
| |
| sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group); |
| |
| if (ddata->extbldev) |
| put_device(&ddata->extbldev->dev); |
| |
| return 0; |
| } |
| |
| static const struct dsic_panel_data taal_data = { |
| .xres = 864, |
| .yres = 480, |
| .refresh = 60, |
| .width_mm = 0, |
| .height_mm = 0, |
| .max_hs_rate = 300000000, |
| .max_lp_rate = 10000000, |
| .te_support = true, |
| }; |
| |
| static const struct dsic_panel_data himalaya_data = { |
| .xres = 480, |
| .yres = 864, |
| .refresh = 60, |
| .width_mm = 49, |
| .height_mm = 88, |
| .max_hs_rate = 300000000, |
| .max_lp_rate = 10000000, |
| .te_support = false, |
| }; |
| |
| static const struct dsic_panel_data droid4_data = { |
| .xres = 540, |
| .yres = 960, |
| .refresh = 60, |
| .width_mm = 50, |
| .height_mm = 89, |
| .max_hs_rate = 300000000, |
| .max_lp_rate = 10000000, |
| .te_support = false, |
| }; |
| |
| static const struct of_device_id dsicm_of_match[] = { |
| { .compatible = "tpo,taal", .data = &taal_data }, |
| { .compatible = "nokia,himalaya", &himalaya_data }, |
| { .compatible = "motorola,droid4-panel", &droid4_data }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, dsicm_of_match); |
| |
| static struct mipi_dsi_driver dsicm_driver = { |
| .probe = dsicm_probe, |
| .remove = dsicm_remove, |
| .driver = { |
| .name = "panel-dsi-cm", |
| .of_match_table = dsicm_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(dsicm_driver); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver"); |
| MODULE_LICENSE("GPL"); |