| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * pps-gpio.c -- PPS client driver using GPIO |
| * |
| * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt> |
| * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca> |
| */ |
| |
| #define PPS_GPIO_NAME "pps-gpio" |
| #define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/pps_kernel.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/list.h> |
| #include <linux/property.h> |
| #include <linux/timer.h> |
| #include <linux/jiffies.h> |
| |
| /* Info for each registered platform device */ |
| struct pps_gpio_device_data { |
| int irq; /* IRQ used as PPS source */ |
| struct pps_device *pps; /* PPS source device */ |
| struct pps_source_info info; /* PPS source information */ |
| struct gpio_desc *gpio_pin; /* GPIO port descriptors */ |
| struct gpio_desc *echo_pin; |
| struct timer_list echo_timer; /* timer to reset echo active state */ |
| bool assert_falling_edge; |
| bool capture_clear; |
| unsigned int echo_active_ms; /* PPS echo active duration */ |
| unsigned long echo_timeout; /* timer timeout value in jiffies */ |
| }; |
| |
| /* |
| * Report the PPS event |
| */ |
| |
| static irqreturn_t pps_gpio_irq_handler(int irq, void *data) |
| { |
| const struct pps_gpio_device_data *info; |
| struct pps_event_time ts; |
| int rising_edge; |
| |
| /* Get the time stamp first */ |
| pps_get_ts(&ts); |
| |
| info = data; |
| |
| rising_edge = gpiod_get_value(info->gpio_pin); |
| if ((rising_edge && !info->assert_falling_edge) || |
| (!rising_edge && info->assert_falling_edge)) |
| pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data); |
| else if (info->capture_clear && |
| ((rising_edge && info->assert_falling_edge) || |
| (!rising_edge && !info->assert_falling_edge))) |
| pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* This function will only be called when an ECHO GPIO is defined */ |
| static void pps_gpio_echo(struct pps_device *pps, int event, void *data) |
| { |
| /* add_timer() needs to write into info->echo_timer */ |
| struct pps_gpio_device_data *info = data; |
| |
| switch (event) { |
| case PPS_CAPTUREASSERT: |
| if (pps->params.mode & PPS_ECHOASSERT) |
| gpiod_set_value(info->echo_pin, 1); |
| break; |
| |
| case PPS_CAPTURECLEAR: |
| if (pps->params.mode & PPS_ECHOCLEAR) |
| gpiod_set_value(info->echo_pin, 1); |
| break; |
| } |
| |
| /* fire the timer */ |
| if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) { |
| info->echo_timer.expires = jiffies + info->echo_timeout; |
| add_timer(&info->echo_timer); |
| } |
| } |
| |
| /* Timer callback to reset the echo pin to the inactive state */ |
| static void pps_gpio_echo_timer_callback(struct timer_list *t) |
| { |
| const struct pps_gpio_device_data *info; |
| |
| info = from_timer(info, t, echo_timer); |
| |
| gpiod_set_value(info->echo_pin, 0); |
| } |
| |
| static int pps_gpio_setup(struct device *dev) |
| { |
| struct pps_gpio_device_data *data = dev_get_drvdata(dev); |
| int ret; |
| u32 value; |
| |
| data->gpio_pin = devm_gpiod_get(dev, NULL, GPIOD_IN); |
| if (IS_ERR(data->gpio_pin)) |
| return dev_err_probe(dev, PTR_ERR(data->gpio_pin), |
| "failed to request PPS GPIO\n"); |
| |
| data->assert_falling_edge = |
| device_property_read_bool(dev, "assert-falling-edge"); |
| |
| data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW); |
| if (IS_ERR(data->echo_pin)) |
| return dev_err_probe(dev, PTR_ERR(data->echo_pin), |
| "failed to request ECHO GPIO\n"); |
| |
| if (!data->echo_pin) |
| return 0; |
| |
| ret = device_property_read_u32(dev, "echo-active-ms", &value); |
| if (ret) { |
| dev_err(dev, "failed to get echo-active-ms from FW\n"); |
| return ret; |
| } |
| |
| /* sanity check on echo_active_ms */ |
| if (!value || value > 999) { |
| dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value); |
| return -EINVAL; |
| } |
| |
| data->echo_active_ms = value; |
| |
| return 0; |
| } |
| |
| static unsigned long |
| get_irqf_trigger_flags(const struct pps_gpio_device_data *data) |
| { |
| unsigned long flags = data->assert_falling_edge ? |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; |
| |
| if (data->capture_clear) { |
| flags |= ((flags & IRQF_TRIGGER_RISING) ? |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING); |
| } |
| |
| return flags; |
| } |
| |
| static int pps_gpio_probe(struct platform_device *pdev) |
| { |
| struct pps_gpio_device_data *data; |
| struct device *dev = &pdev->dev; |
| int ret; |
| int pps_default_params; |
| |
| /* allocate space for device info */ |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, data); |
| |
| /* GPIO setup */ |
| ret = pps_gpio_setup(dev); |
| if (ret) |
| return -EINVAL; |
| |
| /* IRQ setup */ |
| ret = gpiod_to_irq(data->gpio_pin); |
| if (ret < 0) { |
| dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret); |
| return -EINVAL; |
| } |
| data->irq = ret; |
| |
| /* initialize PPS specific parts of the bookkeeping data structure. */ |
| data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | |
| PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC; |
| if (data->capture_clear) |
| data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR | |
| PPS_ECHOCLEAR; |
| data->info.owner = THIS_MODULE; |
| snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d", |
| pdev->name, pdev->id); |
| if (data->echo_pin) { |
| data->info.echo = pps_gpio_echo; |
| data->echo_timeout = msecs_to_jiffies(data->echo_active_ms); |
| timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0); |
| } |
| |
| /* register PPS source */ |
| pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT; |
| if (data->capture_clear) |
| pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR; |
| data->pps = pps_register_source(&data->info, pps_default_params); |
| if (IS_ERR(data->pps)) { |
| dev_err(dev, "failed to register IRQ %d as PPS source\n", |
| data->irq); |
| return PTR_ERR(data->pps); |
| } |
| |
| /* register IRQ interrupt handler */ |
| ret = devm_request_irq(dev, data->irq, pps_gpio_irq_handler, |
| get_irqf_trigger_flags(data), data->info.name, data); |
| if (ret) { |
| pps_unregister_source(data->pps); |
| dev_err(dev, "failed to acquire IRQ %d\n", data->irq); |
| return -EINVAL; |
| } |
| |
| dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", |
| data->irq); |
| |
| return 0; |
| } |
| |
| static int pps_gpio_remove(struct platform_device *pdev) |
| { |
| struct pps_gpio_device_data *data = platform_get_drvdata(pdev); |
| |
| pps_unregister_source(data->pps); |
| del_timer_sync(&data->echo_timer); |
| /* reset echo pin in any case */ |
| gpiod_set_value(data->echo_pin, 0); |
| dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq); |
| return 0; |
| } |
| |
| static const struct of_device_id pps_gpio_dt_ids[] = { |
| { .compatible = "pps-gpio", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids); |
| |
| static struct platform_driver pps_gpio_driver = { |
| .probe = pps_gpio_probe, |
| .remove = pps_gpio_remove, |
| .driver = { |
| .name = PPS_GPIO_NAME, |
| .of_match_table = pps_gpio_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(pps_gpio_driver); |
| MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>"); |
| MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>"); |
| MODULE_DESCRIPTION("Use GPIO pin as PPS source"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("1.2.0"); |