| // SPDX-License-Identifier: GPL-2.0 |
| /** |
| * intel-pasid.c - PASID idr, table and entry manipulation |
| * |
| * Copyright (C) 2018 Intel Corporation |
| * |
| * Author: Lu Baolu <baolu.lu@linux.intel.com> |
| */ |
| |
| #define pr_fmt(fmt) "DMAR: " fmt |
| |
| #include <linux/bitops.h> |
| #include <linux/cpufeature.h> |
| #include <linux/dmar.h> |
| #include <linux/intel-iommu.h> |
| #include <linux/iommu.h> |
| #include <linux/memory.h> |
| #include <linux/pci.h> |
| #include <linux/pci-ats.h> |
| #include <linux/spinlock.h> |
| |
| #include "intel-pasid.h" |
| |
| /* |
| * Intel IOMMU system wide PASID name space: |
| */ |
| static DEFINE_SPINLOCK(pasid_lock); |
| u32 intel_pasid_max_id = PASID_MAX; |
| static DEFINE_IDR(pasid_idr); |
| |
| int intel_pasid_alloc_id(void *ptr, int start, int end, gfp_t gfp) |
| { |
| int ret, min, max; |
| |
| min = max_t(int, start, PASID_MIN); |
| max = min_t(int, end, intel_pasid_max_id); |
| |
| WARN_ON(in_interrupt()); |
| idr_preload(gfp); |
| spin_lock(&pasid_lock); |
| ret = idr_alloc(&pasid_idr, ptr, min, max, GFP_ATOMIC); |
| spin_unlock(&pasid_lock); |
| idr_preload_end(); |
| |
| return ret; |
| } |
| |
| void intel_pasid_free_id(int pasid) |
| { |
| spin_lock(&pasid_lock); |
| idr_remove(&pasid_idr, pasid); |
| spin_unlock(&pasid_lock); |
| } |
| |
| void *intel_pasid_lookup_id(int pasid) |
| { |
| void *p; |
| |
| spin_lock(&pasid_lock); |
| p = idr_find(&pasid_idr, pasid); |
| spin_unlock(&pasid_lock); |
| |
| return p; |
| } |
| |
| /* |
| * Per device pasid table management: |
| */ |
| static inline void |
| device_attach_pasid_table(struct device_domain_info *info, |
| struct pasid_table *pasid_table) |
| { |
| info->pasid_table = pasid_table; |
| list_add(&info->table, &pasid_table->dev); |
| } |
| |
| static inline void |
| device_detach_pasid_table(struct device_domain_info *info, |
| struct pasid_table *pasid_table) |
| { |
| info->pasid_table = NULL; |
| list_del(&info->table); |
| } |
| |
| struct pasid_table_opaque { |
| struct pasid_table **pasid_table; |
| int segment; |
| int bus; |
| int devfn; |
| }; |
| |
| static int search_pasid_table(struct device_domain_info *info, void *opaque) |
| { |
| struct pasid_table_opaque *data = opaque; |
| |
| if (info->iommu->segment == data->segment && |
| info->bus == data->bus && |
| info->devfn == data->devfn && |
| info->pasid_table) { |
| *data->pasid_table = info->pasid_table; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int get_alias_pasid_table(struct pci_dev *pdev, u16 alias, void *opaque) |
| { |
| struct pasid_table_opaque *data = opaque; |
| |
| data->segment = pci_domain_nr(pdev->bus); |
| data->bus = PCI_BUS_NUM(alias); |
| data->devfn = alias & 0xff; |
| |
| return for_each_device_domain(&search_pasid_table, data); |
| } |
| |
| /* |
| * Allocate a pasid table for @dev. It should be called in a |
| * single-thread context. |
| */ |
| int intel_pasid_alloc_table(struct device *dev) |
| { |
| struct device_domain_info *info; |
| struct pasid_table *pasid_table; |
| struct pasid_table_opaque data; |
| struct page *pages; |
| int max_pasid = 0; |
| int ret, order; |
| int size; |
| |
| might_sleep(); |
| info = dev->archdata.iommu; |
| if (WARN_ON(!info || !dev_is_pci(dev) || info->pasid_table)) |
| return -EINVAL; |
| |
| /* DMA alias device already has a pasid table, use it: */ |
| data.pasid_table = &pasid_table; |
| ret = pci_for_each_dma_alias(to_pci_dev(dev), |
| &get_alias_pasid_table, &data); |
| if (ret) |
| goto attach_out; |
| |
| pasid_table = kzalloc(sizeof(*pasid_table), GFP_KERNEL); |
| if (!pasid_table) |
| return -ENOMEM; |
| INIT_LIST_HEAD(&pasid_table->dev); |
| |
| if (info->pasid_supported) |
| max_pasid = min_t(int, pci_max_pasids(to_pci_dev(dev)), |
| intel_pasid_max_id); |
| |
| size = max_pasid >> (PASID_PDE_SHIFT - 3); |
| order = size ? get_order(size) : 0; |
| pages = alloc_pages_node(info->iommu->node, |
| GFP_KERNEL | __GFP_ZERO, order); |
| if (!pages) |
| return -ENOMEM; |
| |
| pasid_table->table = page_address(pages); |
| pasid_table->order = order; |
| pasid_table->max_pasid = 1 << (order + PAGE_SHIFT + 3); |
| |
| attach_out: |
| device_attach_pasid_table(info, pasid_table); |
| |
| return 0; |
| } |
| |
| /* Get PRESENT bit of a PASID directory entry. */ |
| static inline bool |
| pasid_pde_is_present(struct pasid_dir_entry *pde) |
| { |
| return READ_ONCE(pde->val) & PASID_PTE_PRESENT; |
| } |
| |
| /* Get PASID table from a PASID directory entry. */ |
| static inline struct pasid_entry * |
| get_pasid_table_from_pde(struct pasid_dir_entry *pde) |
| { |
| if (!pasid_pde_is_present(pde)) |
| return NULL; |
| |
| return phys_to_virt(READ_ONCE(pde->val) & PDE_PFN_MASK); |
| } |
| |
| void intel_pasid_free_table(struct device *dev) |
| { |
| struct device_domain_info *info; |
| struct pasid_table *pasid_table; |
| struct pasid_dir_entry *dir; |
| struct pasid_entry *table; |
| int i, max_pde; |
| |
| info = dev->archdata.iommu; |
| if (!info || !dev_is_pci(dev) || !info->pasid_table) |
| return; |
| |
| pasid_table = info->pasid_table; |
| device_detach_pasid_table(info, pasid_table); |
| |
| if (!list_empty(&pasid_table->dev)) |
| return; |
| |
| /* Free scalable mode PASID directory tables: */ |
| dir = pasid_table->table; |
| max_pde = pasid_table->max_pasid >> PASID_PDE_SHIFT; |
| for (i = 0; i < max_pde; i++) { |
| table = get_pasid_table_from_pde(&dir[i]); |
| free_pgtable_page(table); |
| } |
| |
| free_pages((unsigned long)pasid_table->table, pasid_table->order); |
| kfree(pasid_table); |
| } |
| |
| struct pasid_table *intel_pasid_get_table(struct device *dev) |
| { |
| struct device_domain_info *info; |
| |
| info = dev->archdata.iommu; |
| if (!info) |
| return NULL; |
| |
| return info->pasid_table; |
| } |
| |
| int intel_pasid_get_dev_max_id(struct device *dev) |
| { |
| struct device_domain_info *info; |
| |
| info = dev->archdata.iommu; |
| if (!info || !info->pasid_table) |
| return 0; |
| |
| return info->pasid_table->max_pasid; |
| } |
| |
| struct pasid_entry *intel_pasid_get_entry(struct device *dev, int pasid) |
| { |
| struct device_domain_info *info; |
| struct pasid_table *pasid_table; |
| struct pasid_dir_entry *dir; |
| struct pasid_entry *entries; |
| int dir_index, index; |
| |
| pasid_table = intel_pasid_get_table(dev); |
| if (WARN_ON(!pasid_table || pasid < 0 || |
| pasid >= intel_pasid_get_dev_max_id(dev))) |
| return NULL; |
| |
| dir = pasid_table->table; |
| info = dev->archdata.iommu; |
| dir_index = pasid >> PASID_PDE_SHIFT; |
| index = pasid & PASID_PTE_MASK; |
| |
| spin_lock(&pasid_lock); |
| entries = get_pasid_table_from_pde(&dir[dir_index]); |
| if (!entries) { |
| entries = alloc_pgtable_page(info->iommu->node); |
| if (!entries) { |
| spin_unlock(&pasid_lock); |
| return NULL; |
| } |
| |
| WRITE_ONCE(dir[dir_index].val, |
| (u64)virt_to_phys(entries) | PASID_PTE_PRESENT); |
| } |
| spin_unlock(&pasid_lock); |
| |
| return &entries[index]; |
| } |
| |
| /* |
| * Interfaces for PASID table entry manipulation: |
| */ |
| static inline void pasid_clear_entry(struct pasid_entry *pe) |
| { |
| WRITE_ONCE(pe->val[0], 0); |
| WRITE_ONCE(pe->val[1], 0); |
| WRITE_ONCE(pe->val[2], 0); |
| WRITE_ONCE(pe->val[3], 0); |
| WRITE_ONCE(pe->val[4], 0); |
| WRITE_ONCE(pe->val[5], 0); |
| WRITE_ONCE(pe->val[6], 0); |
| WRITE_ONCE(pe->val[7], 0); |
| } |
| |
| static void intel_pasid_clear_entry(struct device *dev, int pasid) |
| { |
| struct pasid_entry *pe; |
| |
| pe = intel_pasid_get_entry(dev, pasid); |
| if (WARN_ON(!pe)) |
| return; |
| |
| pasid_clear_entry(pe); |
| } |
| |
| static inline void pasid_set_bits(u64 *ptr, u64 mask, u64 bits) |
| { |
| u64 old; |
| |
| old = READ_ONCE(*ptr); |
| WRITE_ONCE(*ptr, (old & ~mask) | bits); |
| } |
| |
| /* |
| * Setup the DID(Domain Identifier) field (Bit 64~79) of scalable mode |
| * PASID entry. |
| */ |
| static inline void |
| pasid_set_domain_id(struct pasid_entry *pe, u64 value) |
| { |
| pasid_set_bits(&pe->val[1], GENMASK_ULL(15, 0), value); |
| } |
| |
| /* |
| * Get domain ID value of a scalable mode PASID entry. |
| */ |
| static inline u16 |
| pasid_get_domain_id(struct pasid_entry *pe) |
| { |
| return (u16)(READ_ONCE(pe->val[1]) & GENMASK_ULL(15, 0)); |
| } |
| |
| /* |
| * Setup the SLPTPTR(Second Level Page Table Pointer) field (Bit 12~63) |
| * of a scalable mode PASID entry. |
| */ |
| static inline void |
| pasid_set_slptr(struct pasid_entry *pe, u64 value) |
| { |
| pasid_set_bits(&pe->val[0], VTD_PAGE_MASK, value); |
| } |
| |
| /* |
| * Setup the AW(Address Width) field (Bit 2~4) of a scalable mode PASID |
| * entry. |
| */ |
| static inline void |
| pasid_set_address_width(struct pasid_entry *pe, u64 value) |
| { |
| pasid_set_bits(&pe->val[0], GENMASK_ULL(4, 2), value << 2); |
| } |
| |
| /* |
| * Setup the PGTT(PASID Granular Translation Type) field (Bit 6~8) |
| * of a scalable mode PASID entry. |
| */ |
| static inline void |
| pasid_set_translation_type(struct pasid_entry *pe, u64 value) |
| { |
| pasid_set_bits(&pe->val[0], GENMASK_ULL(8, 6), value << 6); |
| } |
| |
| /* |
| * Enable fault processing by clearing the FPD(Fault Processing |
| * Disable) field (Bit 1) of a scalable mode PASID entry. |
| */ |
| static inline void pasid_set_fault_enable(struct pasid_entry *pe) |
| { |
| pasid_set_bits(&pe->val[0], 1 << 1, 0); |
| } |
| |
| /* |
| * Setup the SRE(Supervisor Request Enable) field (Bit 128) of a |
| * scalable mode PASID entry. |
| */ |
| static inline void pasid_set_sre(struct pasid_entry *pe) |
| { |
| pasid_set_bits(&pe->val[2], 1 << 0, 1); |
| } |
| |
| /* |
| * Setup the P(Present) field (Bit 0) of a scalable mode PASID |
| * entry. |
| */ |
| static inline void pasid_set_present(struct pasid_entry *pe) |
| { |
| pasid_set_bits(&pe->val[0], 1 << 0, 1); |
| } |
| |
| /* |
| * Setup Page Walk Snoop bit (Bit 87) of a scalable mode PASID |
| * entry. |
| */ |
| static inline void pasid_set_page_snoop(struct pasid_entry *pe, bool value) |
| { |
| pasid_set_bits(&pe->val[1], 1 << 23, value); |
| } |
| |
| /* |
| * Setup the First Level Page table Pointer field (Bit 140~191) |
| * of a scalable mode PASID entry. |
| */ |
| static inline void |
| pasid_set_flptr(struct pasid_entry *pe, u64 value) |
| { |
| pasid_set_bits(&pe->val[2], VTD_PAGE_MASK, value); |
| } |
| |
| /* |
| * Setup the First Level Paging Mode field (Bit 130~131) of a |
| * scalable mode PASID entry. |
| */ |
| static inline void |
| pasid_set_flpm(struct pasid_entry *pe, u64 value) |
| { |
| pasid_set_bits(&pe->val[2], GENMASK_ULL(3, 2), value << 2); |
| } |
| |
| static void |
| pasid_cache_invalidation_with_pasid(struct intel_iommu *iommu, |
| u16 did, int pasid) |
| { |
| struct qi_desc desc; |
| |
| desc.qw0 = QI_PC_DID(did) | QI_PC_PASID_SEL | QI_PC_PASID(pasid); |
| desc.qw1 = 0; |
| desc.qw2 = 0; |
| desc.qw3 = 0; |
| |
| qi_submit_sync(&desc, iommu); |
| } |
| |
| static void |
| iotlb_invalidation_with_pasid(struct intel_iommu *iommu, u16 did, u32 pasid) |
| { |
| struct qi_desc desc; |
| |
| desc.qw0 = QI_EIOTLB_PASID(pasid) | QI_EIOTLB_DID(did) | |
| QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) | QI_EIOTLB_TYPE; |
| desc.qw1 = 0; |
| desc.qw2 = 0; |
| desc.qw3 = 0; |
| |
| qi_submit_sync(&desc, iommu); |
| } |
| |
| static void |
| devtlb_invalidation_with_pasid(struct intel_iommu *iommu, |
| struct device *dev, int pasid) |
| { |
| struct device_domain_info *info; |
| u16 sid, qdep, pfsid; |
| |
| info = dev->archdata.iommu; |
| if (!info || !info->ats_enabled) |
| return; |
| |
| sid = info->bus << 8 | info->devfn; |
| qdep = info->ats_qdep; |
| pfsid = info->pfsid; |
| |
| qi_flush_dev_iotlb(iommu, sid, pfsid, qdep, 0, 64 - VTD_PAGE_SHIFT); |
| } |
| |
| void intel_pasid_tear_down_entry(struct intel_iommu *iommu, |
| struct device *dev, int pasid) |
| { |
| struct pasid_entry *pte; |
| u16 did; |
| |
| pte = intel_pasid_get_entry(dev, pasid); |
| if (WARN_ON(!pte)) |
| return; |
| |
| intel_pasid_clear_entry(dev, pasid); |
| did = pasid_get_domain_id(pte); |
| |
| if (!ecap_coherent(iommu->ecap)) |
| clflush_cache_range(pte, sizeof(*pte)); |
| |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); |
| iotlb_invalidation_with_pasid(iommu, did, pasid); |
| |
| /* Device IOTLB doesn't need to be flushed in caching mode. */ |
| if (!cap_caching_mode(iommu->cap)) |
| devtlb_invalidation_with_pasid(iommu, dev, pasid); |
| } |
| |
| /* |
| * Set up the scalable mode pasid table entry for first only |
| * translation type. |
| */ |
| int intel_pasid_setup_first_level(struct intel_iommu *iommu, |
| struct device *dev, pgd_t *pgd, |
| int pasid, u16 did, int flags) |
| { |
| struct pasid_entry *pte; |
| |
| if (!ecap_flts(iommu->ecap)) { |
| pr_err("No first level translation support on %s\n", |
| iommu->name); |
| return -EINVAL; |
| } |
| |
| pte = intel_pasid_get_entry(dev, pasid); |
| if (WARN_ON(!pte)) |
| return -EINVAL; |
| |
| pasid_clear_entry(pte); |
| |
| /* Setup the first level page table pointer: */ |
| pasid_set_flptr(pte, (u64)__pa(pgd)); |
| if (flags & PASID_FLAG_SUPERVISOR_MODE) { |
| if (!ecap_srs(iommu->ecap)) { |
| pr_err("No supervisor request support on %s\n", |
| iommu->name); |
| return -EINVAL; |
| } |
| pasid_set_sre(pte); |
| } |
| |
| #ifdef CONFIG_X86 |
| if (cpu_feature_enabled(X86_FEATURE_LA57)) |
| pasid_set_flpm(pte, 1); |
| #endif /* CONFIG_X86 */ |
| |
| pasid_set_domain_id(pte, did); |
| pasid_set_address_width(pte, iommu->agaw); |
| pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap)); |
| |
| /* Setup Present and PASID Granular Transfer Type: */ |
| pasid_set_translation_type(pte, 1); |
| pasid_set_present(pte); |
| |
| if (!ecap_coherent(iommu->ecap)) |
| clflush_cache_range(pte, sizeof(*pte)); |
| |
| if (cap_caching_mode(iommu->cap)) { |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); |
| iotlb_invalidation_with_pasid(iommu, did, pasid); |
| } else { |
| iommu_flush_write_buffer(iommu); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Set up the scalable mode pasid entry for second only translation type. |
| */ |
| int intel_pasid_setup_second_level(struct intel_iommu *iommu, |
| struct dmar_domain *domain, |
| struct device *dev, int pasid) |
| { |
| struct pasid_entry *pte; |
| struct dma_pte *pgd; |
| u64 pgd_val; |
| int agaw; |
| u16 did; |
| |
| /* |
| * If hardware advertises no support for second level |
| * translation, return directly. |
| */ |
| if (!ecap_slts(iommu->ecap)) { |
| pr_err("No second level translation support on %s\n", |
| iommu->name); |
| return -EINVAL; |
| } |
| |
| /* |
| * Skip top levels of page tables for iommu which has less agaw |
| * than default. Unnecessary for PT mode. |
| */ |
| pgd = domain->pgd; |
| for (agaw = domain->agaw; agaw > iommu->agaw; agaw--) { |
| pgd = phys_to_virt(dma_pte_addr(pgd)); |
| if (!dma_pte_present(pgd)) { |
| dev_err(dev, "Invalid domain page table\n"); |
| return -EINVAL; |
| } |
| } |
| |
| pgd_val = virt_to_phys(pgd); |
| did = domain->iommu_did[iommu->seq_id]; |
| |
| pte = intel_pasid_get_entry(dev, pasid); |
| if (!pte) { |
| dev_err(dev, "Failed to get pasid entry of PASID %d\n", pasid); |
| return -ENODEV; |
| } |
| |
| pasid_clear_entry(pte); |
| pasid_set_domain_id(pte, did); |
| pasid_set_slptr(pte, pgd_val); |
| pasid_set_address_width(pte, agaw); |
| pasid_set_translation_type(pte, 2); |
| pasid_set_fault_enable(pte); |
| pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap)); |
| |
| /* |
| * Since it is a second level only translation setup, we should |
| * set SRE bit as well (addresses are expected to be GPAs). |
| */ |
| pasid_set_sre(pte); |
| pasid_set_present(pte); |
| |
| if (!ecap_coherent(iommu->ecap)) |
| clflush_cache_range(pte, sizeof(*pte)); |
| |
| if (cap_caching_mode(iommu->cap)) { |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); |
| iotlb_invalidation_with_pasid(iommu, did, pasid); |
| } else { |
| iommu_flush_write_buffer(iommu); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Set up the scalable mode pasid entry for passthrough translation type. |
| */ |
| int intel_pasid_setup_pass_through(struct intel_iommu *iommu, |
| struct dmar_domain *domain, |
| struct device *dev, int pasid) |
| { |
| u16 did = FLPT_DEFAULT_DID; |
| struct pasid_entry *pte; |
| |
| pte = intel_pasid_get_entry(dev, pasid); |
| if (!pte) { |
| dev_err(dev, "Failed to get pasid entry of PASID %d\n", pasid); |
| return -ENODEV; |
| } |
| |
| pasid_clear_entry(pte); |
| pasid_set_domain_id(pte, did); |
| pasid_set_address_width(pte, iommu->agaw); |
| pasid_set_translation_type(pte, 4); |
| pasid_set_fault_enable(pte); |
| pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap)); |
| |
| /* |
| * We should set SRE bit as well since the addresses are expected |
| * to be GPAs. |
| */ |
| pasid_set_sre(pte); |
| pasid_set_present(pte); |
| |
| if (!ecap_coherent(iommu->ecap)) |
| clflush_cache_range(pte, sizeof(*pte)); |
| |
| if (cap_caching_mode(iommu->cap)) { |
| pasid_cache_invalidation_with_pasid(iommu, did, pasid); |
| iotlb_invalidation_with_pasid(iommu, did, pasid); |
| } else { |
| iommu_flush_write_buffer(iommu); |
| } |
| |
| return 0; |
| } |