| /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
| #ifndef _UAPI_ASM_GENERIC_SIGINFO_H |
| #define _UAPI_ASM_GENERIC_SIGINFO_H |
| |
| #include <linux/compiler.h> |
| #include <linux/types.h> |
| |
| typedef union sigval { |
| int sival_int; |
| void __user *sival_ptr; |
| } sigval_t; |
| |
| #define SI_MAX_SIZE 128 |
| |
| /* |
| * The default "si_band" type is "long", as specified by POSIX. |
| * However, some architectures want to override this to "int" |
| * for historical compatibility reasons, so we allow that. |
| */ |
| #ifndef __ARCH_SI_BAND_T |
| #define __ARCH_SI_BAND_T long |
| #endif |
| |
| #ifndef __ARCH_SI_CLOCK_T |
| #define __ARCH_SI_CLOCK_T __kernel_clock_t |
| #endif |
| |
| #ifndef __ARCH_SI_ATTRIBUTES |
| #define __ARCH_SI_ATTRIBUTES |
| #endif |
| |
| /* |
| * Be careful when extending this union. On 32bit siginfo_t is 32bit |
| * aligned. Which means that a 64bit field or any other field that |
| * would increase the alignment of siginfo_t will break the ABI. |
| */ |
| union __sifields { |
| /* kill() */ |
| struct { |
| __kernel_pid_t _pid; /* sender's pid */ |
| __kernel_uid32_t _uid; /* sender's uid */ |
| } _kill; |
| |
| /* POSIX.1b timers */ |
| struct { |
| __kernel_timer_t _tid; /* timer id */ |
| int _overrun; /* overrun count */ |
| sigval_t _sigval; /* same as below */ |
| int _sys_private; /* not to be passed to user */ |
| } _timer; |
| |
| /* POSIX.1b signals */ |
| struct { |
| __kernel_pid_t _pid; /* sender's pid */ |
| __kernel_uid32_t _uid; /* sender's uid */ |
| sigval_t _sigval; |
| } _rt; |
| |
| /* SIGCHLD */ |
| struct { |
| __kernel_pid_t _pid; /* which child */ |
| __kernel_uid32_t _uid; /* sender's uid */ |
| int _status; /* exit code */ |
| __ARCH_SI_CLOCK_T _utime; |
| __ARCH_SI_CLOCK_T _stime; |
| } _sigchld; |
| |
| /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGTRAP, SIGEMT */ |
| struct { |
| void __user *_addr; /* faulting insn/memory ref. */ |
| #ifdef __ia64__ |
| int _imm; /* immediate value for "break" */ |
| unsigned int _flags; /* see ia64 si_flags */ |
| unsigned long _isr; /* isr */ |
| #endif |
| |
| #define __ADDR_BND_PKEY_PAD (__alignof__(void *) < sizeof(short) ? \ |
| sizeof(short) : __alignof__(void *)) |
| union { |
| /* used on alpha and sparc */ |
| int _trapno; /* TRAP # which caused the signal */ |
| /* |
| * used when si_code=BUS_MCEERR_AR or |
| * used when si_code=BUS_MCEERR_AO |
| */ |
| short _addr_lsb; /* LSB of the reported address */ |
| /* used when si_code=SEGV_BNDERR */ |
| struct { |
| char _dummy_bnd[__ADDR_BND_PKEY_PAD]; |
| void __user *_lower; |
| void __user *_upper; |
| } _addr_bnd; |
| /* used when si_code=SEGV_PKUERR */ |
| struct { |
| char _dummy_pkey[__ADDR_BND_PKEY_PAD]; |
| __u32 _pkey; |
| } _addr_pkey; |
| /* used when si_code=TRAP_PERF */ |
| struct { |
| unsigned long _data; |
| __u32 _type; |
| __u32 _flags; |
| } _perf; |
| }; |
| } _sigfault; |
| |
| /* SIGPOLL */ |
| struct { |
| __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ |
| int _fd; |
| } _sigpoll; |
| |
| /* SIGSYS */ |
| struct { |
| void __user *_call_addr; /* calling user insn */ |
| int _syscall; /* triggering system call number */ |
| unsigned int _arch; /* AUDIT_ARCH_* of syscall */ |
| } _sigsys; |
| }; |
| |
| #ifndef __ARCH_HAS_SWAPPED_SIGINFO |
| #define __SIGINFO \ |
| struct { \ |
| int si_signo; \ |
| int si_errno; \ |
| int si_code; \ |
| union __sifields _sifields; \ |
| } |
| #else |
| #define __SIGINFO \ |
| struct { \ |
| int si_signo; \ |
| int si_code; \ |
| int si_errno; \ |
| union __sifields _sifields; \ |
| } |
| #endif /* __ARCH_HAS_SWAPPED_SIGINFO */ |
| |
| typedef struct siginfo { |
| union { |
| __SIGINFO; |
| int _si_pad[SI_MAX_SIZE/sizeof(int)]; |
| }; |
| } __ARCH_SI_ATTRIBUTES siginfo_t; |
| |
| /* |
| * How these fields are to be accessed. |
| */ |
| #define si_pid _sifields._kill._pid |
| #define si_uid _sifields._kill._uid |
| #define si_tid _sifields._timer._tid |
| #define si_overrun _sifields._timer._overrun |
| #define si_sys_private _sifields._timer._sys_private |
| #define si_status _sifields._sigchld._status |
| #define si_utime _sifields._sigchld._utime |
| #define si_stime _sifields._sigchld._stime |
| #define si_value _sifields._rt._sigval |
| #define si_int _sifields._rt._sigval.sival_int |
| #define si_ptr _sifields._rt._sigval.sival_ptr |
| #define si_addr _sifields._sigfault._addr |
| #define si_trapno _sifields._sigfault._trapno |
| #define si_addr_lsb _sifields._sigfault._addr_lsb |
| #define si_lower _sifields._sigfault._addr_bnd._lower |
| #define si_upper _sifields._sigfault._addr_bnd._upper |
| #define si_pkey _sifields._sigfault._addr_pkey._pkey |
| #define si_perf_data _sifields._sigfault._perf._data |
| #define si_perf_type _sifields._sigfault._perf._type |
| #define si_perf_flags _sifields._sigfault._perf._flags |
| #define si_band _sifields._sigpoll._band |
| #define si_fd _sifields._sigpoll._fd |
| #define si_call_addr _sifields._sigsys._call_addr |
| #define si_syscall _sifields._sigsys._syscall |
| #define si_arch _sifields._sigsys._arch |
| |
| /* |
| * si_code values |
| * Digital reserves positive values for kernel-generated signals. |
| */ |
| #define SI_USER 0 /* sent by kill, sigsend, raise */ |
| #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */ |
| #define SI_QUEUE -1 /* sent by sigqueue */ |
| #define SI_TIMER -2 /* sent by timer expiration */ |
| #define SI_MESGQ -3 /* sent by real time mesq state change */ |
| #define SI_ASYNCIO -4 /* sent by AIO completion */ |
| #define SI_SIGIO -5 /* sent by queued SIGIO */ |
| #define SI_TKILL -6 /* sent by tkill system call */ |
| #define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */ |
| #define SI_ASYNCNL -60 /* sent by glibc async name lookup completion */ |
| |
| #define SI_FROMUSER(siptr) ((siptr)->si_code <= 0) |
| #define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0) |
| |
| /* |
| * SIGILL si_codes |
| */ |
| #define ILL_ILLOPC 1 /* illegal opcode */ |
| #define ILL_ILLOPN 2 /* illegal operand */ |
| #define ILL_ILLADR 3 /* illegal addressing mode */ |
| #define ILL_ILLTRP 4 /* illegal trap */ |
| #define ILL_PRVOPC 5 /* privileged opcode */ |
| #define ILL_PRVREG 6 /* privileged register */ |
| #define ILL_COPROC 7 /* coprocessor error */ |
| #define ILL_BADSTK 8 /* internal stack error */ |
| #define ILL_BADIADDR 9 /* unimplemented instruction address */ |
| #define __ILL_BREAK 10 /* illegal break */ |
| #define __ILL_BNDMOD 11 /* bundle-update (modification) in progress */ |
| #define NSIGILL 11 |
| |
| /* |
| * SIGFPE si_codes |
| */ |
| #define FPE_INTDIV 1 /* integer divide by zero */ |
| #define FPE_INTOVF 2 /* integer overflow */ |
| #define FPE_FLTDIV 3 /* floating point divide by zero */ |
| #define FPE_FLTOVF 4 /* floating point overflow */ |
| #define FPE_FLTUND 5 /* floating point underflow */ |
| #define FPE_FLTRES 6 /* floating point inexact result */ |
| #define FPE_FLTINV 7 /* floating point invalid operation */ |
| #define FPE_FLTSUB 8 /* subscript out of range */ |
| #define __FPE_DECOVF 9 /* decimal overflow */ |
| #define __FPE_DECDIV 10 /* decimal division by zero */ |
| #define __FPE_DECERR 11 /* packed decimal error */ |
| #define __FPE_INVASC 12 /* invalid ASCII digit */ |
| #define __FPE_INVDEC 13 /* invalid decimal digit */ |
| #define FPE_FLTUNK 14 /* undiagnosed floating-point exception */ |
| #define FPE_CONDTRAP 15 /* trap on condition */ |
| #define NSIGFPE 15 |
| |
| /* |
| * SIGSEGV si_codes |
| */ |
| #define SEGV_MAPERR 1 /* address not mapped to object */ |
| #define SEGV_ACCERR 2 /* invalid permissions for mapped object */ |
| #define SEGV_BNDERR 3 /* failed address bound checks */ |
| #ifdef __ia64__ |
| # define __SEGV_PSTKOVF 4 /* paragraph stack overflow */ |
| #else |
| # define SEGV_PKUERR 4 /* failed protection key checks */ |
| #endif |
| #define SEGV_ACCADI 5 /* ADI not enabled for mapped object */ |
| #define SEGV_ADIDERR 6 /* Disrupting MCD error */ |
| #define SEGV_ADIPERR 7 /* Precise MCD exception */ |
| #define SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */ |
| #define SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ |
| #define NSIGSEGV 9 |
| |
| /* |
| * SIGBUS si_codes |
| */ |
| #define BUS_ADRALN 1 /* invalid address alignment */ |
| #define BUS_ADRERR 2 /* non-existent physical address */ |
| #define BUS_OBJERR 3 /* object specific hardware error */ |
| /* hardware memory error consumed on a machine check: action required */ |
| #define BUS_MCEERR_AR 4 |
| /* hardware memory error detected in process but not consumed: action optional*/ |
| #define BUS_MCEERR_AO 5 |
| #define NSIGBUS 5 |
| |
| /* |
| * SIGTRAP si_codes |
| */ |
| #define TRAP_BRKPT 1 /* process breakpoint */ |
| #define TRAP_TRACE 2 /* process trace trap */ |
| #define TRAP_BRANCH 3 /* process taken branch trap */ |
| #define TRAP_HWBKPT 4 /* hardware breakpoint/watchpoint */ |
| #define TRAP_UNK 5 /* undiagnosed trap */ |
| #define TRAP_PERF 6 /* perf event with sigtrap=1 */ |
| #define NSIGTRAP 6 |
| |
| /* |
| * There is an additional set of SIGTRAP si_codes used by ptrace |
| * that are of the form: ((PTRACE_EVENT_XXX << 8) | SIGTRAP) |
| */ |
| |
| /* |
| * Flags for si_perf_flags if SIGTRAP si_code is TRAP_PERF. |
| */ |
| #define TRAP_PERF_FLAG_ASYNC (1u << 0) |
| |
| /* |
| * SIGCHLD si_codes |
| */ |
| #define CLD_EXITED 1 /* child has exited */ |
| #define CLD_KILLED 2 /* child was killed */ |
| #define CLD_DUMPED 3 /* child terminated abnormally */ |
| #define CLD_TRAPPED 4 /* traced child has trapped */ |
| #define CLD_STOPPED 5 /* child has stopped */ |
| #define CLD_CONTINUED 6 /* stopped child has continued */ |
| #define NSIGCHLD 6 |
| |
| /* |
| * SIGPOLL (or any other signal without signal specific si_codes) si_codes |
| */ |
| #define POLL_IN 1 /* data input available */ |
| #define POLL_OUT 2 /* output buffers available */ |
| #define POLL_MSG 3 /* input message available */ |
| #define POLL_ERR 4 /* i/o error */ |
| #define POLL_PRI 5 /* high priority input available */ |
| #define POLL_HUP 6 /* device disconnected */ |
| #define NSIGPOLL 6 |
| |
| /* |
| * SIGSYS si_codes |
| */ |
| #define SYS_SECCOMP 1 /* seccomp triggered */ |
| #define SYS_USER_DISPATCH 2 /* syscall user dispatch triggered */ |
| #define NSIGSYS 2 |
| |
| /* |
| * SIGEMT si_codes |
| */ |
| #define EMT_TAGOVF 1 /* tag overflow */ |
| #define NSIGEMT 1 |
| |
| /* |
| * sigevent definitions |
| * |
| * It seems likely that SIGEV_THREAD will have to be handled from |
| * userspace, libpthread transmuting it to SIGEV_SIGNAL, which the |
| * thread manager then catches and does the appropriate nonsense. |
| * However, everything is written out here so as to not get lost. |
| */ |
| #define SIGEV_SIGNAL 0 /* notify via signal */ |
| #define SIGEV_NONE 1 /* other notification: meaningless */ |
| #define SIGEV_THREAD 2 /* deliver via thread creation */ |
| #define SIGEV_THREAD_ID 4 /* deliver to thread */ |
| |
| /* |
| * This works because the alignment is ok on all current architectures |
| * but we leave open this being overridden in the future |
| */ |
| #ifndef __ARCH_SIGEV_PREAMBLE_SIZE |
| #define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(int) * 2 + sizeof(sigval_t)) |
| #endif |
| |
| #define SIGEV_MAX_SIZE 64 |
| #define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE - __ARCH_SIGEV_PREAMBLE_SIZE) \ |
| / sizeof(int)) |
| |
| typedef struct sigevent { |
| sigval_t sigev_value; |
| int sigev_signo; |
| int sigev_notify; |
| union { |
| int _pad[SIGEV_PAD_SIZE]; |
| int _tid; |
| |
| struct { |
| void (*_function)(sigval_t); |
| void *_attribute; /* really pthread_attr_t */ |
| } _sigev_thread; |
| } _sigev_un; |
| } sigevent_t; |
| |
| #define sigev_notify_function _sigev_un._sigev_thread._function |
| #define sigev_notify_attributes _sigev_un._sigev_thread._attribute |
| #define sigev_notify_thread_id _sigev_un._tid |
| |
| |
| #endif /* _UAPI_ASM_GENERIC_SIGINFO_H */ |