| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * processor_perflib.c - ACPI Processor P-States Library ($Revision: 71 $) | |
| * | |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> | |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> | |
| * - Added processor hotplug support | |
| */ | |
| #define pr_fmt(fmt) "ACPI: " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/slab.h> | |
| #include <linux/acpi.h> | |
| #include <acpi/processor.h> | |
| #ifdef CONFIG_X86 | |
| #include <asm/cpufeature.h> | |
| #include <asm/msr.h> | |
| #endif | |
| #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" | |
| /* | |
| * _PPC support is implemented as a CPUfreq policy notifier: | |
| * This means each time a CPUfreq driver registered also with | |
| * the ACPI core is asked to change the speed policy, the maximum | |
| * value is adjusted so that it is within the platform limit. | |
| * | |
| * Also, when a new platform limit value is detected, the CPUfreq | |
| * policy is adjusted accordingly. | |
| */ | |
| /* ignore_ppc: | |
| * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet | |
| * ignore _PPC | |
| * 0 -> cpufreq low level drivers initialized -> consider _PPC values | |
| * 1 -> ignore _PPC totally -> forced by user through boot param | |
| */ | |
| static int ignore_ppc = -1; | |
| module_param(ignore_ppc, int, 0644); | |
| MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ | |
| "limited by BIOS, this should help"); | |
| static bool acpi_processor_ppc_in_use; | |
| static int acpi_processor_get_platform_limit(struct acpi_processor *pr) | |
| { | |
| acpi_status status = 0; | |
| unsigned long long ppc = 0; | |
| s32 qos_value; | |
| int index; | |
| int ret; | |
| if (!pr) | |
| return -EINVAL; | |
| /* | |
| * _PPC indicates the maximum state currently supported by the platform | |
| * (e.g. 0 = states 0..n; 1 = states 1..n; etc. | |
| */ | |
| status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc); | |
| if (status != AE_NOT_FOUND) { | |
| acpi_processor_ppc_in_use = true; | |
| if (ACPI_FAILURE(status)) { | |
| acpi_evaluation_failure_warn(pr->handle, "_PPC", status); | |
| return -ENODEV; | |
| } | |
| } | |
| index = ppc; | |
| if (pr->performance_platform_limit == index || | |
| ppc >= pr->performance->state_count) | |
| return 0; | |
| pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id, | |
| index, index ? "is" : "is not"); | |
| pr->performance_platform_limit = index; | |
| if (unlikely(!freq_qos_request_active(&pr->perflib_req))) | |
| return 0; | |
| /* | |
| * If _PPC returns 0, it means that all of the available states can be | |
| * used ("no limit"). | |
| */ | |
| if (index == 0) | |
| qos_value = FREQ_QOS_MAX_DEFAULT_VALUE; | |
| else | |
| qos_value = pr->performance->states[index].core_frequency * 1000; | |
| ret = freq_qos_update_request(&pr->perflib_req, qos_value); | |
| if (ret < 0) { | |
| pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n", | |
| pr->id, ret); | |
| } | |
| return 0; | |
| } | |
| #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 | |
| /* | |
| * acpi_processor_ppc_ost: Notify firmware the _PPC evaluation status | |
| * @handle: ACPI processor handle | |
| * @status: the status code of _PPC evaluation | |
| * 0: success. OSPM is now using the performance state specified. | |
| * 1: failure. OSPM has not changed the number of P-states in use | |
| */ | |
| static void acpi_processor_ppc_ost(acpi_handle handle, int status) | |
| { | |
| if (acpi_has_method(handle, "_OST")) | |
| acpi_evaluate_ost(handle, ACPI_PROCESSOR_NOTIFY_PERFORMANCE, | |
| status, NULL); | |
| } | |
| void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag) | |
| { | |
| int ret; | |
| if (ignore_ppc || !pr->performance) { | |
| /* | |
| * Only when it is notification event, the _OST object | |
| * will be evaluated. Otherwise it is skipped. | |
| */ | |
| if (event_flag) | |
| acpi_processor_ppc_ost(pr->handle, 1); | |
| return; | |
| } | |
| ret = acpi_processor_get_platform_limit(pr); | |
| /* | |
| * Only when it is notification event, the _OST object | |
| * will be evaluated. Otherwise it is skipped. | |
| */ | |
| if (event_flag) { | |
| if (ret < 0) | |
| acpi_processor_ppc_ost(pr->handle, 1); | |
| else | |
| acpi_processor_ppc_ost(pr->handle, 0); | |
| } | |
| if (ret >= 0) | |
| cpufreq_update_limits(pr->id); | |
| } | |
| int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) | |
| { | |
| struct acpi_processor *pr; | |
| pr = per_cpu(processors, cpu); | |
| if (!pr || !pr->performance || !pr->performance->state_count) | |
| return -ENODEV; | |
| *limit = pr->performance->states[pr->performance_platform_limit]. | |
| core_frequency * 1000; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_processor_get_bios_limit); | |
| void acpi_processor_ignore_ppc_init(void) | |
| { | |
| if (ignore_ppc < 0) | |
| ignore_ppc = 0; | |
| } | |
| void acpi_processor_ppc_init(struct cpufreq_policy *policy) | |
| { | |
| unsigned int cpu; | |
| if (ignore_ppc == 1) | |
| return; | |
| for_each_cpu(cpu, policy->related_cpus) { | |
| struct acpi_processor *pr = per_cpu(processors, cpu); | |
| int ret; | |
| if (!pr) | |
| continue; | |
| /* | |
| * Reset performance_platform_limit in case there is a stale | |
| * value in it, so as to make it match the "no limit" QoS value | |
| * below. | |
| */ | |
| pr->performance_platform_limit = 0; | |
| ret = freq_qos_add_request(&policy->constraints, | |
| &pr->perflib_req, FREQ_QOS_MAX, | |
| FREQ_QOS_MAX_DEFAULT_VALUE); | |
| if (ret < 0) | |
| pr_err("Failed to add freq constraint for CPU%d (%d)\n", | |
| cpu, ret); | |
| if (!pr->performance) | |
| continue; | |
| ret = acpi_processor_get_platform_limit(pr); | |
| if (ret) | |
| pr_err("Failed to update freq constraint for CPU%d (%d)\n", | |
| cpu, ret); | |
| } | |
| } | |
| void acpi_processor_ppc_exit(struct cpufreq_policy *policy) | |
| { | |
| unsigned int cpu; | |
| for_each_cpu(cpu, policy->related_cpus) { | |
| struct acpi_processor *pr = per_cpu(processors, cpu); | |
| if (pr) | |
| freq_qos_remove_request(&pr->perflib_req); | |
| } | |
| } | |
| #ifdef CONFIG_X86 | |
| static DEFINE_MUTEX(performance_mutex); | |
| static int acpi_processor_get_performance_control(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| acpi_status status = 0; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| union acpi_object *pct = NULL; | |
| union acpi_object obj = { 0 }; | |
| status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_evaluation_failure_warn(pr->handle, "_PCT", status); | |
| return -ENODEV; | |
| } | |
| pct = (union acpi_object *)buffer.pointer; | |
| if (!pct || pct->type != ACPI_TYPE_PACKAGE || pct->package.count != 2) { | |
| pr_err("Invalid _PCT data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| /* | |
| * control_register | |
| */ | |
| obj = pct->package.elements[0]; | |
| if (!obj.buffer.pointer || obj.type != ACPI_TYPE_BUFFER || | |
| obj.buffer.length < sizeof(struct acpi_pct_register)) { | |
| pr_err("Invalid _PCT data (control_register)\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| memcpy(&pr->performance->control_register, obj.buffer.pointer, | |
| sizeof(struct acpi_pct_register)); | |
| /* | |
| * status_register | |
| */ | |
| obj = pct->package.elements[1]; | |
| if (!obj.buffer.pointer || obj.type != ACPI_TYPE_BUFFER || | |
| obj.buffer.length < sizeof(struct acpi_pct_register)) { | |
| pr_err("Invalid _PCT data (status_register)\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| memcpy(&pr->performance->status_register, obj.buffer.pointer, | |
| sizeof(struct acpi_pct_register)); | |
| end: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| /* | |
| * Some AMDs have 50MHz frequency multiples, but only provide 100MHz rounding | |
| * in their ACPI data. Calculate the real values and fix up the _PSS data. | |
| */ | |
| static void amd_fixup_frequency(struct acpi_processor_px *px, int i) | |
| { | |
| struct msr val; | |
| u32 fid, did; | |
| int index = px->control & 0x00000007; | |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) | |
| return; | |
| if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) || | |
| boot_cpu_data.x86 == 0x11) { | |
| rdmsrq(MSR_AMD_PSTATE_DEF_BASE + index, val.q); | |
| /* | |
| * MSR C001_0064+: | |
| * Bit 63: PstateEn. Read-write. If set, the P-state is valid. | |
| */ | |
| if (!(val.h & BIT(31))) | |
| return; | |
| fid = val.l & 0x3f; | |
| did = (val.l >> 6) & 7; | |
| if (boot_cpu_data.x86 == 0x10) | |
| px->core_frequency = (100 * (fid + 0x10)) >> did; | |
| else | |
| px->core_frequency = (100 * (fid + 8)) >> did; | |
| } | |
| } | |
| static int acpi_processor_get_performance_states(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| acpi_status status = AE_OK; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| struct acpi_buffer format = { sizeof("NNNNNN"), "NNNNNN" }; | |
| struct acpi_buffer state = { 0, NULL }; | |
| union acpi_object *pss = NULL; | |
| int i; | |
| int last_invalid = -1; | |
| status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_evaluation_failure_warn(pr->handle, "_PSS", status); | |
| return -ENODEV; | |
| } | |
| pss = buffer.pointer; | |
| if (!pss || pss->type != ACPI_TYPE_PACKAGE) { | |
| pr_err("Invalid _PSS data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| acpi_handle_debug(pr->handle, "Found %d performance states\n", | |
| pss->package.count); | |
| pr->performance->state_count = pss->package.count; | |
| pr->performance->states = | |
| kmalloc_objs(struct acpi_processor_px, pss->package.count); | |
| if (!pr->performance->states) { | |
| result = -ENOMEM; | |
| goto end; | |
| } | |
| for (i = 0; i < pr->performance->state_count; i++) { | |
| struct acpi_processor_px *px = &(pr->performance->states[i]); | |
| state.length = sizeof(struct acpi_processor_px); | |
| state.pointer = px; | |
| acpi_handle_debug(pr->handle, "Extracting state %d\n", i); | |
| status = acpi_extract_package(&(pss->package.elements[i]), | |
| &format, &state); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_handle_warn(pr->handle, "Invalid _PSS data: %s\n", | |
| acpi_format_exception(status)); | |
| result = -EFAULT; | |
| kfree(pr->performance->states); | |
| goto end; | |
| } | |
| amd_fixup_frequency(px, i); | |
| acpi_handle_debug(pr->handle, | |
| "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n", | |
| i, | |
| (u32) px->core_frequency, | |
| (u32) px->power, | |
| (u32) px->transition_latency, | |
| (u32) px->bus_master_latency, | |
| (u32) px->control, (u32) px->status); | |
| /* | |
| * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq | |
| */ | |
| if (!px->core_frequency || | |
| (u32)(px->core_frequency * 1000) != px->core_frequency * 1000) { | |
| pr_err(FW_BUG | |
| "Invalid BIOS _PSS frequency found for processor %d: 0x%llx MHz\n", | |
| pr->id, px->core_frequency); | |
| if (last_invalid == -1) | |
| last_invalid = i; | |
| } else { | |
| if (last_invalid != -1) { | |
| /* | |
| * Copy this valid entry over last_invalid entry | |
| */ | |
| memcpy(&(pr->performance->states[last_invalid]), | |
| px, sizeof(struct acpi_processor_px)); | |
| ++last_invalid; | |
| } | |
| } | |
| } | |
| if (last_invalid == 0) { | |
| pr_err(FW_BUG | |
| "No valid BIOS _PSS frequency found for processor %d\n", pr->id); | |
| result = -EFAULT; | |
| kfree(pr->performance->states); | |
| pr->performance->states = NULL; | |
| } | |
| if (last_invalid > 0) | |
| pr->performance->state_count = last_invalid; | |
| end: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| int acpi_processor_get_performance_info(struct acpi_processor *pr) | |
| { | |
| int result = 0; | |
| if (!pr || !pr->performance || !pr->handle) | |
| return -EINVAL; | |
| if (!acpi_has_method(pr->handle, "_PCT")) { | |
| acpi_handle_debug(pr->handle, | |
| "ACPI-based processor performance control unavailable\n"); | |
| return -ENODEV; | |
| } | |
| result = acpi_processor_get_performance_control(pr); | |
| if (result) | |
| goto update_bios; | |
| result = acpi_processor_get_performance_states(pr); | |
| if (result) | |
| goto update_bios; | |
| /* We need to call _PPC once when cpufreq starts */ | |
| if (ignore_ppc != 1) | |
| result = acpi_processor_get_platform_limit(pr); | |
| return result; | |
| /* | |
| * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that | |
| * the BIOS is older than the CPU and does not know its frequencies | |
| */ | |
| update_bios: | |
| if (acpi_has_method(pr->handle, "_PPC")) { | |
| if(boot_cpu_has(X86_FEATURE_EST)) | |
| pr_warn(FW_BUG "BIOS needs update for CPU " | |
| "frequency support\n"); | |
| } | |
| return result; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info); | |
| int acpi_processor_pstate_control(void) | |
| { | |
| acpi_status status; | |
| if (!acpi_gbl_FADT.smi_command || !acpi_gbl_FADT.pstate_control) | |
| return 0; | |
| pr_debug("Writing pstate_control [0x%x] to smi_command [0x%x]\n", | |
| acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command); | |
| status = acpi_os_write_port(acpi_gbl_FADT.smi_command, | |
| (u32)acpi_gbl_FADT.pstate_control, 8); | |
| if (ACPI_SUCCESS(status)) | |
| return 1; | |
| pr_warn("Failed to write pstate_control [0x%x] to smi_command [0x%x]: %s\n", | |
| acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command, | |
| acpi_format_exception(status)); | |
| return -EIO; | |
| } | |
| int acpi_processor_notify_smm(struct module *calling_module) | |
| { | |
| static int is_done; | |
| int result = 0; | |
| if (!acpi_processor_cpufreq_init) | |
| return -EBUSY; | |
| if (!try_module_get(calling_module)) | |
| return -EINVAL; | |
| /* | |
| * is_done is set to negative if an error occurs and to 1 if no error | |
| * occurrs, but SMM has been notified already. This avoids repeated | |
| * notification which might lead to unexpected results. | |
| */ | |
| if (is_done != 0) { | |
| if (is_done < 0) | |
| result = is_done; | |
| goto out_put; | |
| } | |
| result = acpi_processor_pstate_control(); | |
| if (result <= 0) { | |
| if (result) { | |
| is_done = result; | |
| } else { | |
| pr_debug("No SMI port or pstate_control\n"); | |
| is_done = 1; | |
| } | |
| goto out_put; | |
| } | |
| is_done = 1; | |
| /* | |
| * Success. If there _PPC, unloading the cpufreq driver would be risky, | |
| * so disallow it in that case. | |
| */ | |
| if (acpi_processor_ppc_in_use) | |
| return 0; | |
| out_put: | |
| module_put(calling_module); | |
| return result; | |
| } | |
| EXPORT_SYMBOL(acpi_processor_notify_smm); | |
| int acpi_processor_get_psd(acpi_handle handle, struct acpi_psd_package *pdomain) | |
| { | |
| int result = 0; | |
| acpi_status status = AE_OK; | |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; | |
| struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"}; | |
| struct acpi_buffer state = {0, NULL}; | |
| union acpi_object *psd = NULL; | |
| status = acpi_evaluate_object(handle, "_PSD", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| return -ENODEV; | |
| } | |
| psd = buffer.pointer; | |
| if (!psd || psd->type != ACPI_TYPE_PACKAGE) { | |
| pr_err("Invalid _PSD data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (psd->package.count != 1) { | |
| pr_err("Invalid _PSD data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| state.length = sizeof(struct acpi_psd_package); | |
| state.pointer = pdomain; | |
| status = acpi_extract_package(&(psd->package.elements[0]), &format, &state); | |
| if (ACPI_FAILURE(status)) { | |
| pr_err("Invalid _PSD data\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) { | |
| pr_err("Unknown _PSD:num_entries\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (pdomain->revision != ACPI_PSD_REV0_REVISION) { | |
| pr_err("Unknown _PSD:revision\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && | |
| pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && | |
| pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { | |
| pr_err("Invalid _PSD:coord_type\n"); | |
| result = -EFAULT; | |
| goto end; | |
| } | |
| end: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| EXPORT_SYMBOL(acpi_processor_get_psd); | |
| int acpi_processor_preregister_performance( | |
| struct acpi_processor_performance __percpu *performance) | |
| { | |
| int count_target; | |
| int retval = 0; | |
| unsigned int i, j; | |
| cpumask_var_t covered_cpus; | |
| struct acpi_processor *pr; | |
| struct acpi_psd_package *pdomain; | |
| struct acpi_processor *match_pr; | |
| struct acpi_psd_package *match_pdomain; | |
| if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)) | |
| return -ENOMEM; | |
| mutex_lock(&performance_mutex); | |
| /* | |
| * Check if another driver has already registered, and abort before | |
| * changing pr->performance if it has. Check input data as well. | |
| */ | |
| for_each_possible_cpu(i) { | |
| pr = per_cpu(processors, i); | |
| if (!pr) { | |
| /* Look only at processors in ACPI namespace */ | |
| continue; | |
| } | |
| if (pr->performance) { | |
| retval = -EBUSY; | |
| goto err_out; | |
| } | |
| if (!performance || !per_cpu_ptr(performance, i)) { | |
| retval = -EINVAL; | |
| goto err_out; | |
| } | |
| } | |
| /* Call _PSD for all CPUs */ | |
| for_each_possible_cpu(i) { | |
| pr = per_cpu(processors, i); | |
| if (!pr) | |
| continue; | |
| pr->performance = per_cpu_ptr(performance, i); | |
| pdomain = &(pr->performance->domain_info); | |
| if (acpi_processor_get_psd(pr->handle, pdomain)) { | |
| retval = -EINVAL; | |
| continue; | |
| } | |
| } | |
| if (retval) | |
| goto err_ret; | |
| /* | |
| * Now that we have _PSD data from all CPUs, lets setup P-state | |
| * domain info. | |
| */ | |
| for_each_possible_cpu(i) { | |
| pr = per_cpu(processors, i); | |
| if (!pr) | |
| continue; | |
| if (cpumask_test_cpu(i, covered_cpus)) | |
| continue; | |
| pdomain = &(pr->performance->domain_info); | |
| cpumask_set_cpu(i, pr->performance->shared_cpu_map); | |
| cpumask_set_cpu(i, covered_cpus); | |
| if (pdomain->num_processors <= 1) | |
| continue; | |
| /* Validate the Domain info */ | |
| count_target = pdomain->num_processors; | |
| if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) | |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; | |
| else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) | |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_HW; | |
| else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY) | |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ANY; | |
| for_each_possible_cpu(j) { | |
| if (i == j) | |
| continue; | |
| match_pr = per_cpu(processors, j); | |
| if (!match_pr) | |
| continue; | |
| match_pdomain = &(match_pr->performance->domain_info); | |
| if (match_pdomain->domain != pdomain->domain) | |
| continue; | |
| /* Here i and j are in the same domain */ | |
| if (match_pdomain->num_processors != count_target) { | |
| retval = -EINVAL; | |
| goto err_ret; | |
| } | |
| if (pdomain->coord_type != match_pdomain->coord_type) { | |
| retval = -EINVAL; | |
| goto err_ret; | |
| } | |
| cpumask_set_cpu(j, covered_cpus); | |
| cpumask_set_cpu(j, pr->performance->shared_cpu_map); | |
| } | |
| for_each_possible_cpu(j) { | |
| if (i == j) | |
| continue; | |
| match_pr = per_cpu(processors, j); | |
| if (!match_pr) | |
| continue; | |
| match_pdomain = &(match_pr->performance->domain_info); | |
| if (match_pdomain->domain != pdomain->domain) | |
| continue; | |
| match_pr->performance->shared_type = | |
| pr->performance->shared_type; | |
| cpumask_copy(match_pr->performance->shared_cpu_map, | |
| pr->performance->shared_cpu_map); | |
| } | |
| } | |
| err_ret: | |
| for_each_possible_cpu(i) { | |
| pr = per_cpu(processors, i); | |
| if (!pr || !pr->performance) | |
| continue; | |
| /* Assume no coordination on any error parsing domain info */ | |
| if (retval) { | |
| cpumask_clear(pr->performance->shared_cpu_map); | |
| cpumask_set_cpu(i, pr->performance->shared_cpu_map); | |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_NONE; | |
| } | |
| pr->performance = NULL; /* Will be set for real in register */ | |
| } | |
| err_out: | |
| mutex_unlock(&performance_mutex); | |
| free_cpumask_var(covered_cpus); | |
| return retval; | |
| } | |
| EXPORT_SYMBOL(acpi_processor_preregister_performance); | |
| int acpi_processor_register_performance(struct acpi_processor_performance | |
| *performance, unsigned int cpu) | |
| { | |
| struct acpi_processor *pr; | |
| if (!acpi_processor_cpufreq_init) | |
| return -EINVAL; | |
| mutex_lock(&performance_mutex); | |
| pr = per_cpu(processors, cpu); | |
| if (!pr) { | |
| mutex_unlock(&performance_mutex); | |
| return -ENODEV; | |
| } | |
| if (pr->performance) { | |
| mutex_unlock(&performance_mutex); | |
| return -EBUSY; | |
| } | |
| WARN_ON(!performance); | |
| pr->performance = performance; | |
| if (acpi_processor_get_performance_info(pr)) { | |
| pr->performance = NULL; | |
| mutex_unlock(&performance_mutex); | |
| return -EIO; | |
| } | |
| mutex_unlock(&performance_mutex); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_processor_register_performance); | |
| void acpi_processor_unregister_performance(unsigned int cpu) | |
| { | |
| struct acpi_processor *pr; | |
| mutex_lock(&performance_mutex); | |
| pr = per_cpu(processors, cpu); | |
| if (!pr) | |
| goto unlock; | |
| if (pr->performance) | |
| kfree(pr->performance->states); | |
| pr->performance = NULL; | |
| unlock: | |
| mutex_unlock(&performance_mutex); | |
| } | |
| EXPORT_SYMBOL(acpi_processor_unregister_performance); | |
| #endif |