| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * coretemp.c - Linux kernel module for hardware monitoring | |
| * | |
| * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> | |
| * | |
| * Inspired from many hwmon drivers | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/list.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/cpu.h> | |
| #include <linux/smp.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/pci.h> | |
| #include <asm/msr.h> | |
| #include <linux/processor.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <linux/sched/isolation.h> | |
| #define DRVNAME "coretemp" | |
| /* | |
| * force_tjmax only matters when TjMax can't be read from the CPU itself. | |
| * When set, it replaces the driver's suboptimal heuristic. | |
| */ | |
| static int force_tjmax; | |
| module_param_named(tjmax, force_tjmax, int, 0444); | |
| MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); | |
| #define CORETEMP_NAME_LENGTH 28 /* String Length of attrs */ | |
| enum coretemp_attr_index { | |
| ATTR_LABEL, | |
| ATTR_CRIT_ALARM, | |
| ATTR_TEMP, | |
| ATTR_TJMAX, | |
| ATTR_TTARGET, | |
| MAX_CORE_ATTRS = ATTR_TJMAX + 1, /* Maximum no of basic attrs */ | |
| TOTAL_ATTRS = ATTR_TTARGET + 1 /* Maximum no of possible attrs */ | |
| }; | |
| #ifdef CONFIG_SMP | |
| #define for_each_sibling(i, cpu) \ | |
| for_each_cpu(i, topology_sibling_cpumask(cpu)) | |
| #else | |
| #define for_each_sibling(i, cpu) for (i = 0; false; ) | |
| #endif | |
| /* | |
| * Per-Core Temperature Data | |
| * @tjmax: The static tjmax value when tjmax cannot be retrieved from | |
| * IA32_TEMPERATURE_TARGET MSR. | |
| * @last_updated: The time when the current temperature value was updated | |
| * earlier (in jiffies). | |
| * @cpu_core_id: The CPU Core from which temperature values should be read | |
| * This value is passed as "id" field to rdmsr/wrmsr functions. | |
| * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS, | |
| * from where the temperature values should be read. | |
| * @attr_size: Number of sysfs attributes in this temperature data group. | |
| */ | |
| struct temp_data { | |
| int temp; | |
| int tjmax; | |
| unsigned long last_updated; | |
| unsigned int cpu; | |
| int index; | |
| u32 cpu_core_id; | |
| u32 status_reg; | |
| int attr_size; | |
| struct device_attribute sd_attrs[TOTAL_ATTRS]; | |
| char attr_name[TOTAL_ATTRS][CORETEMP_NAME_LENGTH]; | |
| struct attribute *attrs[TOTAL_ATTRS + 1]; | |
| struct attribute_group attr_group; | |
| struct mutex update_lock; | |
| }; | |
| /* Platform Data per Physical CPU */ | |
| struct platform_data { | |
| struct device *hwmon_dev; | |
| u16 pkg_id; | |
| int nr_cores; | |
| struct ida ida; | |
| struct cpumask cpumask; | |
| struct temp_data *pkg_data; | |
| struct temp_data **core_data; | |
| struct device_attribute name_attr; | |
| }; | |
| struct tjmax_pci { | |
| unsigned int device; | |
| int tjmax; | |
| }; | |
| static const struct tjmax_pci tjmax_pci_table[] = { | |
| { 0x0708, 110000 }, /* CE41x0 (Sodaville ) */ | |
| { 0x0c72, 102000 }, /* Atom S1240 (Centerton) */ | |
| { 0x0c73, 95000 }, /* Atom S1220 (Centerton) */ | |
| { 0x0c75, 95000 }, /* Atom S1260 (Centerton) */ | |
| }; | |
| struct tjmax { | |
| char const *id; | |
| int tjmax; | |
| }; | |
| static const struct tjmax tjmax_table[] = { | |
| { "CPU 230", 100000 }, /* Model 0x1c, stepping 2 */ | |
| { "CPU 330", 125000 }, /* Model 0x1c, stepping 2 */ | |
| }; | |
| struct tjmax_model { | |
| u32 vfm; | |
| u8 stepping_mask; | |
| int tjmax; | |
| }; | |
| #define ANY 0xff | |
| static const struct tjmax_model tjmax_model_table[] = { | |
| { INTEL_ATOM_BONNELL, 10, 100000 }, /* D4xx, K4xx, N4xx, D5xx, K5xx, N5xx */ | |
| { INTEL_ATOM_BONNELL, ANY, 90000 }, /* Z5xx, N2xx, possibly others | |
| * Note: Also matches 230 and 330, | |
| * which are covered by tjmax_table | |
| */ | |
| { INTEL_ATOM_BONNELL_MID, ANY, 90000 }, /* Atom Tunnel Creek (Exx), Lincroft (Z6xx) | |
| * Note: TjMax for E6xxT is 110C, but CPU | |
| * type is undetectable by software | |
| */ | |
| { INTEL_ATOM_SALTWELL_MID, ANY, 90000 }, /* Atom Medfield (Z2460) */ | |
| { INTEL_ATOM_SALTWELL_TABLET, ANY, 90000 }, /* Atom Clover Trail/Cloverview (Z27x0) */ | |
| { INTEL_ATOM_SALTWELL, ANY, 100000 }, /* Atom Cedar Trail/Cedarview (N2xxx, D2xxx) | |
| * Also matches S12x0 (stepping 9), covered | |
| * by PCI table | |
| */ | |
| { INTEL_ATOM_SILVERMONT, 9, 110000 }, /* Atom Bay Trail E38xx (embedded) */ | |
| { INTEL_ATOM_SILVERMONT, ANY, 90000 }, /* Atom Bay Trail Z37xx (tablet) */ | |
| { INTEL_ATOM_SILVERMONT_MID, ANY, 90000 }, /* Atom Merrifield (Z34xx) */ | |
| { INTEL_ATOM_SILVERMONT_MID2, ANY, 90000 }, /* Atom Moorefield (Z35xx) */ | |
| { INTEL_ATOM_AIRMONT, ANY, 90000 }, /* Atom Cherry Trail (Z8xxx) */ | |
| { INTEL_ATOM_GOLDMONT, ANY, 105000 }, /* Atom Apollo Lake (J3xxx, N3xxx, E39xx) */ | |
| { INTEL_ATOM_GOLDMONT_PLUS, ANY, 105000 }, /* Atom Gemini Lake (J4xxx, N4xxx, N5xxx) */ | |
| { INTEL_ATOM_TREMONT, ANY, 105000 }, /* Atom Elkhart Lake */ | |
| { INTEL_ATOM_TREMONT_L, ANY, 105000 }, /* Atom Jasper Lake */ | |
| }; | |
| static bool is_pkg_temp_data(struct temp_data *tdata) | |
| { | |
| return tdata->index < 0; | |
| } | |
| static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) | |
| { | |
| /* The 100C is default for both mobile and non mobile CPUs */ | |
| int tjmax = 100000; | |
| int tjmax_ee = 85000; | |
| int usemsr_ee = 1; | |
| int err; | |
| u64 val; | |
| int i; | |
| u16 devfn = PCI_DEVFN(0, 0); | |
| struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn); | |
| /* | |
| * Explicit tjmax table entries override heuristics. | |
| * First try PCI host bridge IDs, followed by model ID strings | |
| * and model/stepping information. | |
| */ | |
| if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL) { | |
| for (i = 0; i < ARRAY_SIZE(tjmax_pci_table); i++) { | |
| if (host_bridge->device == tjmax_pci_table[i].device) { | |
| pci_dev_put(host_bridge); | |
| return tjmax_pci_table[i].tjmax; | |
| } | |
| } | |
| } | |
| pci_dev_put(host_bridge); | |
| /* | |
| * This is literally looking for "CPU XXX" in the model string. | |
| * Not checking it against the model as well. Just purely a | |
| * string search. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) { | |
| if (strstr(c->x86_model_id, tjmax_table[i].id)) | |
| return tjmax_table[i].tjmax; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) { | |
| const struct tjmax_model *tm = &tjmax_model_table[i]; | |
| if (c->x86_vfm == tm->vfm && | |
| (tm->stepping_mask == ANY || | |
| tm->stepping_mask == c->x86_stepping)) | |
| return tm->tjmax; | |
| } | |
| /* Early chips have no MSR for TjMax */ | |
| if (c->x86_vfm == INTEL_CORE2_MEROM && c->x86_stepping < 4) | |
| usemsr_ee = 0; | |
| if (c->x86_vfm > INTEL_CORE_YONAH && usemsr_ee) { | |
| u8 platform_id; | |
| /* | |
| * Now we can detect the mobile CPU using Intel provided table | |
| * http://softwarecommunity.intel.com/Wiki/Mobility/720.htm | |
| * For Core2 cores, check MSR 0x17, bit 28 1 = Mobile CPU | |
| */ | |
| err = rdmsrq_safe_on_cpu(id, 0x17, &val); | |
| if (err) { | |
| dev_warn(dev, | |
| "Unable to access MSR 0x17, assuming desktop CPU\n"); | |
| usemsr_ee = 0; | |
| } else if (c->x86_vfm < INTEL_CORE2_PENRYN && | |
| !(val & 0x10000000)) { | |
| /* | |
| * Trust bit 28 up to Penryn, I could not find any | |
| * documentation on that; if you happen to know | |
| * someone at Intel please ask | |
| */ | |
| usemsr_ee = 0; | |
| } else { | |
| /* Platform ID bits 52:50 */ | |
| platform_id = (val >> 50) & 0x7; | |
| /* | |
| * Mobile Penryn CPU seems to be platform ID 7 or 5 | |
| * (guesswork) | |
| */ | |
| if (c->x86_vfm == INTEL_CORE2_PENRYN && | |
| (platform_id == 5 || platform_id == 7)) { | |
| /* | |
| * If MSR EE bit is set, set it to 90 degrees C, | |
| * otherwise 105 degrees C | |
| */ | |
| tjmax_ee = 90000; | |
| tjmax = 105000; | |
| } | |
| } | |
| } | |
| if (usemsr_ee) { | |
| err = rdmsrq_safe_on_cpu(id, 0xee, &val); | |
| if (err) { | |
| dev_warn(dev, | |
| "Unable to access MSR 0xEE, for Tjmax, left at default\n"); | |
| } else if (val & 0x40000000) { | |
| tjmax = tjmax_ee; | |
| } | |
| } else if (tjmax == 100000) { | |
| /* | |
| * If we don't use msr EE it means we are desktop CPU | |
| * (with exeception of Atom) | |
| */ | |
| dev_warn(dev, "Using relative temperature scale!\n"); | |
| } | |
| return tjmax; | |
| } | |
| static int get_tjmax(struct temp_data *tdata, struct device *dev) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(tdata->cpu); | |
| int err; | |
| u64 msrval; | |
| u32 val; | |
| /* use static tjmax once it is set */ | |
| if (tdata->tjmax) | |
| return tdata->tjmax; | |
| /* | |
| * A new feature of current Intel(R) processors, the | |
| * IA32_TEMPERATURE_TARGET contains the TjMax value | |
| */ | |
| err = rdmsrq_safe_on_cpu(tdata->cpu, MSR_IA32_TEMPERATURE_TARGET, &msrval); | |
| if (err) { | |
| dev_warn_once(dev, "Unable to read TjMax from CPU %u\n", tdata->cpu); | |
| } else { | |
| val = (msrval >> 16) & 0xff; | |
| if (val) | |
| return val * 1000; | |
| } | |
| if (force_tjmax) { | |
| dev_notice(dev, "TjMax forced to %d degrees C by user\n", | |
| force_tjmax); | |
| tdata->tjmax = force_tjmax * 1000; | |
| } else { | |
| /* | |
| * An assumption is made for early CPUs and unreadable MSR. | |
| * NOTE: the calculated value may not be correct. | |
| */ | |
| tdata->tjmax = adjust_tjmax(c, tdata->cpu, dev); | |
| } | |
| return tdata->tjmax; | |
| } | |
| static int get_ttarget(struct temp_data *tdata, struct device *dev) | |
| { | |
| u64 val; | |
| int tjmax, ttarget_offset, ret; | |
| /* | |
| * ttarget is valid only if tjmax can be retrieved from | |
| * MSR_IA32_TEMPERATURE_TARGET | |
| */ | |
| if (tdata->tjmax) | |
| return -ENODEV; | |
| ret = rdmsrq_safe_on_cpu(tdata->cpu, MSR_IA32_TEMPERATURE_TARGET, &val); | |
| if (ret) | |
| return ret; | |
| tjmax = (val >> 16) & 0xff; | |
| /* Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET. */ | |
| ttarget_offset = (val >> 8) & 0xff; | |
| return (tjmax - ttarget_offset) * 1000; | |
| } | |
| /* Keep track of how many zone pointers we allocated in init() */ | |
| static int max_zones __read_mostly; | |
| /* Array of zone pointers. Serialized by cpu hotplug lock */ | |
| static struct platform_device **zone_devices; | |
| static ssize_t show_label(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| struct platform_data *pdata = dev_get_drvdata(dev); | |
| struct temp_data *tdata = container_of(devattr, struct temp_data, sd_attrs[ATTR_LABEL]); | |
| if (is_pkg_temp_data(tdata)) | |
| return sprintf(buf, "Package id %u\n", pdata->pkg_id); | |
| return sprintf(buf, "Core %u\n", tdata->cpu_core_id); | |
| } | |
| static ssize_t show_crit_alarm(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| struct msr val; | |
| struct temp_data *tdata = container_of(devattr, struct temp_data, | |
| sd_attrs[ATTR_CRIT_ALARM]); | |
| mutex_lock(&tdata->update_lock); | |
| rdmsrq_on_cpu(tdata->cpu, tdata->status_reg, &val.q); | |
| mutex_unlock(&tdata->update_lock); | |
| return sprintf(buf, "%d\n", (val.l >> 5) & 1); | |
| } | |
| static ssize_t show_tjmax(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| struct temp_data *tdata = container_of(devattr, struct temp_data, sd_attrs[ATTR_TJMAX]); | |
| int tjmax; | |
| mutex_lock(&tdata->update_lock); | |
| tjmax = get_tjmax(tdata, dev); | |
| mutex_unlock(&tdata->update_lock); | |
| return sprintf(buf, "%d\n", tjmax); | |
| } | |
| static ssize_t show_ttarget(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| struct temp_data *tdata = container_of(devattr, struct temp_data, sd_attrs[ATTR_TTARGET]); | |
| int ttarget; | |
| mutex_lock(&tdata->update_lock); | |
| ttarget = get_ttarget(tdata, dev); | |
| mutex_unlock(&tdata->update_lock); | |
| if (ttarget < 0) | |
| return ttarget; | |
| return sprintf(buf, "%d\n", ttarget); | |
| } | |
| static ssize_t show_temp(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| struct msr val; | |
| struct temp_data *tdata = container_of(devattr, struct temp_data, sd_attrs[ATTR_TEMP]); | |
| int tjmax; | |
| mutex_lock(&tdata->update_lock); | |
| tjmax = get_tjmax(tdata, dev); | |
| /* Check whether the time interval has elapsed */ | |
| if (time_after(jiffies, tdata->last_updated + HZ)) { | |
| rdmsrq_on_cpu(tdata->cpu, tdata->status_reg, &val.q); | |
| /* | |
| * Ignore the valid bit. In all observed cases the register | |
| * value is either low or zero if the valid bit is 0. | |
| * Return it instead of reporting an error which doesn't | |
| * really help at all. | |
| */ | |
| tdata->temp = tjmax - ((val.l >> 16) & 0xff) * 1000; | |
| tdata->last_updated = jiffies; | |
| } | |
| mutex_unlock(&tdata->update_lock); | |
| return sprintf(buf, "%d\n", tdata->temp); | |
| } | |
| static int create_core_attrs(struct temp_data *tdata, struct device *dev) | |
| { | |
| static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev, | |
| struct device_attribute *devattr, char *buf) = { | |
| show_label, show_crit_alarm, show_temp, show_tjmax, | |
| show_ttarget }; | |
| static const char *const suffixes[TOTAL_ATTRS] = { | |
| "label", "crit_alarm", "input", "crit", "max" | |
| }; | |
| int i; | |
| for (i = 0; i < tdata->attr_size; i++) { | |
| /* | |
| * We map the attr number to core id of the CPU | |
| * The attr number is always core id + 2 | |
| * The Pkgtemp will always show up as temp1_*, if available | |
| */ | |
| int attr_no = is_pkg_temp_data(tdata) ? 1 : tdata->cpu_core_id + 2; | |
| snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, | |
| "temp%d_%s", attr_no, suffixes[i]); | |
| sysfs_attr_init(&tdata->sd_attrs[i].attr); | |
| tdata->sd_attrs[i].attr.name = tdata->attr_name[i]; | |
| tdata->sd_attrs[i].attr.mode = 0444; | |
| tdata->sd_attrs[i].show = rd_ptr[i]; | |
| tdata->attrs[i] = &tdata->sd_attrs[i].attr; | |
| } | |
| tdata->attr_group.attrs = tdata->attrs; | |
| return sysfs_create_group(&dev->kobj, &tdata->attr_group); | |
| } | |
| static int chk_ucode_version(unsigned int cpu) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| /* | |
| * Check if we have problem with errata AE18 of Core processors: | |
| * Readings might stop update when processor visited too deep sleep, | |
| * fixed for stepping D0 (6EC). | |
| */ | |
| if (c->x86_vfm == INTEL_CORE_YONAH && c->x86_stepping < 0xc && c->microcode < 0x39) { | |
| pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static struct platform_device *coretemp_get_pdev(unsigned int cpu) | |
| { | |
| int id = topology_logical_die_id(cpu); | |
| if (id >= 0 && id < max_zones) | |
| return zone_devices[id]; | |
| return NULL; | |
| } | |
| static struct temp_data * | |
| init_temp_data(struct platform_data *pdata, unsigned int cpu, int pkg_flag) | |
| { | |
| struct temp_data *tdata; | |
| if (!pdata->core_data) { | |
| pdata->nr_cores = topology_num_cores_per_package(); | |
| pdata->core_data = kzalloc_objs(struct temp_data *, | |
| pdata->nr_cores); | |
| if (!pdata->core_data) | |
| return NULL; | |
| } | |
| tdata = kzalloc_obj(struct temp_data); | |
| if (!tdata) | |
| return NULL; | |
| if (pkg_flag) { | |
| pdata->pkg_data = tdata; | |
| /* Use tdata->index as indicator of package temp data */ | |
| tdata->index = -1; | |
| } else { | |
| tdata->index = ida_alloc_max(&pdata->ida, pdata->nr_cores - 1, GFP_KERNEL); | |
| if (tdata->index < 0) { | |
| kfree(tdata); | |
| return NULL; | |
| } | |
| pdata->core_data[tdata->index] = tdata; | |
| } | |
| tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS : | |
| MSR_IA32_THERM_STATUS; | |
| tdata->cpu = cpu; | |
| tdata->cpu_core_id = topology_core_id(cpu); | |
| tdata->attr_size = MAX_CORE_ATTRS; | |
| mutex_init(&tdata->update_lock); | |
| return tdata; | |
| } | |
| static void destroy_temp_data(struct platform_data *pdata, struct temp_data *tdata) | |
| { | |
| if (is_pkg_temp_data(tdata)) { | |
| pdata->pkg_data = NULL; | |
| kfree(pdata->core_data); | |
| pdata->core_data = NULL; | |
| pdata->nr_cores = 0; | |
| } else { | |
| pdata->core_data[tdata->index] = NULL; | |
| ida_free(&pdata->ida, tdata->index); | |
| } | |
| kfree(tdata); | |
| } | |
| static struct temp_data *get_temp_data(struct platform_data *pdata, int cpu) | |
| { | |
| int i; | |
| /* cpu < 0 means get pkg temp_data */ | |
| if (cpu < 0) | |
| return pdata->pkg_data; | |
| for (i = 0; i < pdata->nr_cores; i++) { | |
| if (pdata->core_data[i] && | |
| pdata->core_data[i]->cpu_core_id == topology_core_id(cpu)) | |
| return pdata->core_data[i]; | |
| } | |
| return NULL; | |
| } | |
| static int create_core_data(struct platform_device *pdev, unsigned int cpu, | |
| int pkg_flag) | |
| { | |
| struct temp_data *tdata; | |
| struct platform_data *pdata = platform_get_drvdata(pdev); | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| u64 val; | |
| int err; | |
| if (!housekeeping_cpu(cpu, HK_TYPE_MISC)) | |
| return 0; | |
| tdata = init_temp_data(pdata, cpu, pkg_flag); | |
| if (!tdata) | |
| return -ENOMEM; | |
| /* Test if we can access the status register */ | |
| err = rdmsrq_safe_on_cpu(cpu, tdata->status_reg, &val); | |
| if (err) | |
| goto err; | |
| /* Make sure tdata->tjmax is a valid indicator for dynamic/static tjmax */ | |
| get_tjmax(tdata, &pdev->dev); | |
| /* | |
| * The target temperature is available on older CPUs but not in the | |
| * MSR_IA32_TEMPERATURE_TARGET register. Atoms don't have the register | |
| * at all. | |
| */ | |
| if (c->x86_vfm > INTEL_CORE_YONAH && c->x86_vfm != INTEL_ATOM_BONNELL) | |
| if (get_ttarget(tdata, &pdev->dev) >= 0) | |
| tdata->attr_size++; | |
| /* Create sysfs interfaces */ | |
| err = create_core_attrs(tdata, pdata->hwmon_dev); | |
| if (err) | |
| goto err; | |
| return 0; | |
| err: | |
| destroy_temp_data(pdata, tdata); | |
| return err; | |
| } | |
| static void | |
| coretemp_add_core(struct platform_device *pdev, unsigned int cpu, int pkg_flag) | |
| { | |
| if (create_core_data(pdev, cpu, pkg_flag)) | |
| dev_err(&pdev->dev, "Adding Core %u failed\n", cpu); | |
| } | |
| static void coretemp_remove_core(struct platform_data *pdata, struct temp_data *tdata) | |
| { | |
| /* if we errored on add then this is already gone */ | |
| if (!tdata) | |
| return; | |
| /* Remove the sysfs attributes */ | |
| sysfs_remove_group(&pdata->hwmon_dev->kobj, &tdata->attr_group); | |
| destroy_temp_data(pdata, tdata); | |
| } | |
| static int coretemp_device_add(int zoneid) | |
| { | |
| struct platform_device *pdev; | |
| struct platform_data *pdata; | |
| int err; | |
| /* Initialize the per-zone data structures */ | |
| pdata = kzalloc_obj(*pdata); | |
| if (!pdata) | |
| return -ENOMEM; | |
| pdata->pkg_id = zoneid; | |
| ida_init(&pdata->ida); | |
| pdev = platform_device_alloc(DRVNAME, zoneid); | |
| if (!pdev) { | |
| err = -ENOMEM; | |
| goto err_free_pdata; | |
| } | |
| err = platform_device_add(pdev); | |
| if (err) | |
| goto err_put_dev; | |
| platform_set_drvdata(pdev, pdata); | |
| zone_devices[zoneid] = pdev; | |
| return 0; | |
| err_put_dev: | |
| platform_device_put(pdev); | |
| err_free_pdata: | |
| kfree(pdata); | |
| return err; | |
| } | |
| static void coretemp_device_remove(int zoneid) | |
| { | |
| struct platform_device *pdev = zone_devices[zoneid]; | |
| struct platform_data *pdata = platform_get_drvdata(pdev); | |
| ida_destroy(&pdata->ida); | |
| kfree(pdata->core_data); | |
| kfree(pdata); | |
| platform_device_unregister(pdev); | |
| } | |
| static int coretemp_cpu_online(unsigned int cpu) | |
| { | |
| struct platform_device *pdev = coretemp_get_pdev(cpu); | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| struct platform_data *pdata; | |
| /* | |
| * Don't execute this on resume as the offline callback did | |
| * not get executed on suspend. | |
| */ | |
| if (cpuhp_tasks_frozen) | |
| return 0; | |
| /* | |
| * CPUID.06H.EAX[0] indicates whether the CPU has thermal | |
| * sensors. We check this bit only, all the early CPUs | |
| * without thermal sensors will be filtered out. | |
| */ | |
| if (!cpu_has(c, X86_FEATURE_DTHERM)) | |
| return -ENODEV; | |
| pdata = platform_get_drvdata(pdev); | |
| if (!pdata->hwmon_dev) { | |
| struct device *hwmon; | |
| /* Check the microcode version of the CPU */ | |
| if (chk_ucode_version(cpu)) | |
| return -EINVAL; | |
| /* | |
| * Alright, we have DTS support. | |
| * We are bringing the _first_ core in this pkg | |
| * online. So, initialize per-pkg data structures and | |
| * then bring this core online. | |
| */ | |
| hwmon = hwmon_device_register_with_groups(&pdev->dev, DRVNAME, | |
| pdata, NULL); | |
| if (IS_ERR(hwmon)) | |
| return PTR_ERR(hwmon); | |
| pdata->hwmon_dev = hwmon; | |
| /* | |
| * Check whether pkgtemp support is available. | |
| * If so, add interfaces for pkgtemp. | |
| */ | |
| if (cpu_has(c, X86_FEATURE_PTS)) | |
| coretemp_add_core(pdev, cpu, 1); | |
| } | |
| /* | |
| * Check whether a thread sibling is already online. If not add the | |
| * interface for this CPU core. | |
| */ | |
| if (!cpumask_intersects(&pdata->cpumask, topology_sibling_cpumask(cpu))) | |
| coretemp_add_core(pdev, cpu, 0); | |
| cpumask_set_cpu(cpu, &pdata->cpumask); | |
| return 0; | |
| } | |
| static int coretemp_cpu_offline(unsigned int cpu) | |
| { | |
| struct platform_device *pdev = coretemp_get_pdev(cpu); | |
| struct platform_data *pd; | |
| struct temp_data *tdata; | |
| int target; | |
| /* No need to tear down any interfaces for suspend */ | |
| if (cpuhp_tasks_frozen) | |
| return 0; | |
| /* If the physical CPU device does not exist, just return */ | |
| pd = platform_get_drvdata(pdev); | |
| if (!pd->hwmon_dev) | |
| return 0; | |
| tdata = get_temp_data(pd, cpu); | |
| cpumask_clear_cpu(cpu, &pd->cpumask); | |
| /* | |
| * If this is the last thread sibling, remove the CPU core | |
| * interface, If there is still a sibling online, transfer the | |
| * target cpu of that core interface to it. | |
| */ | |
| target = cpumask_any_and(&pd->cpumask, topology_sibling_cpumask(cpu)); | |
| if (target >= nr_cpu_ids) { | |
| coretemp_remove_core(pd, tdata); | |
| } else if (tdata && tdata->cpu == cpu) { | |
| mutex_lock(&tdata->update_lock); | |
| tdata->cpu = target; | |
| mutex_unlock(&tdata->update_lock); | |
| } | |
| /* | |
| * If all cores in this pkg are offline, remove the interface. | |
| */ | |
| tdata = get_temp_data(pd, -1); | |
| if (cpumask_empty(&pd->cpumask)) { | |
| if (tdata) | |
| coretemp_remove_core(pd, tdata); | |
| hwmon_device_unregister(pd->hwmon_dev); | |
| pd->hwmon_dev = NULL; | |
| return 0; | |
| } | |
| /* | |
| * Check whether this core is the target for the package | |
| * interface. We need to assign it to some other cpu. | |
| */ | |
| if (tdata && tdata->cpu == cpu) { | |
| target = cpumask_first(&pd->cpumask); | |
| mutex_lock(&tdata->update_lock); | |
| tdata->cpu = target; | |
| mutex_unlock(&tdata->update_lock); | |
| } | |
| return 0; | |
| } | |
| static const struct x86_cpu_id coretemp_ids[] __initconst = { | |
| X86_MATCH_VENDOR_FEATURE(INTEL, X86_FEATURE_DTHERM, NULL), | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(x86cpu, coretemp_ids); | |
| static enum cpuhp_state coretemp_hp_online; | |
| static int __init coretemp_init(void) | |
| { | |
| int i, err; | |
| /* | |
| * CPUID.06H.EAX[0] indicates whether the CPU has thermal | |
| * sensors. We check this bit only, all the early CPUs | |
| * without thermal sensors will be filtered out. This | |
| * includes all the Family 5 and Family 15 (Pentium 4) | |
| * models, since they never set the CPUID bit. | |
| */ | |
| if (!x86_match_cpu(coretemp_ids)) | |
| return -ENODEV; | |
| max_zones = topology_max_packages() * topology_max_dies_per_package(); | |
| zone_devices = kzalloc_objs(struct platform_device *, max_zones); | |
| if (!zone_devices) | |
| return -ENOMEM; | |
| for (i = 0; i < max_zones; i++) { | |
| err = coretemp_device_add(i); | |
| if (err) | |
| goto outzone; | |
| } | |
| err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hwmon/coretemp:online", | |
| coretemp_cpu_online, coretemp_cpu_offline); | |
| if (err < 0) | |
| goto outzone; | |
| coretemp_hp_online = err; | |
| return 0; | |
| outzone: | |
| while (i--) | |
| coretemp_device_remove(i); | |
| kfree(zone_devices); | |
| return err; | |
| } | |
| module_init(coretemp_init) | |
| static void __exit coretemp_exit(void) | |
| { | |
| int i; | |
| cpuhp_remove_state(coretemp_hp_online); | |
| for (i = 0; i < max_zones; i++) | |
| coretemp_device_remove(i); | |
| kfree(zone_devices); | |
| } | |
| module_exit(coretemp_exit) | |
| MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); | |
| MODULE_DESCRIPTION("Intel Core temperature monitor"); | |
| MODULE_LICENSE("GPL"); |