| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * phy-can-transceiver.c - phy driver for CAN transceivers | |
| * | |
| * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com | |
| * | |
| */ | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/module.h> | |
| #include <linux/mux/consumer.h> | |
| struct can_transceiver_data { | |
| u32 flags; | |
| #define CAN_TRANSCEIVER_STB_PRESENT BIT(0) | |
| #define CAN_TRANSCEIVER_EN_PRESENT BIT(1) | |
| #define CAN_TRANSCEIVER_DUAL_CH BIT(2) | |
| #define CAN_TRANSCEIVER_SILENT_PRESENT BIT(3) | |
| }; | |
| struct can_transceiver_phy { | |
| struct phy *generic_phy; | |
| struct gpio_desc *silent_gpio; | |
| struct gpio_desc *standby_gpio; | |
| struct gpio_desc *enable_gpio; | |
| struct can_transceiver_priv *priv; | |
| }; | |
| struct can_transceiver_priv { | |
| struct mux_state *mux_state; | |
| int num_ch; | |
| struct can_transceiver_phy can_transceiver_phy[] __counted_by(num_ch); | |
| }; | |
| /* Power on function */ | |
| static int can_transceiver_phy_power_on(struct phy *phy) | |
| { | |
| struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); | |
| struct can_transceiver_priv *priv = can_transceiver_phy->priv; | |
| int ret; | |
| if (priv->mux_state) { | |
| ret = mux_state_select(priv->mux_state); | |
| if (ret) { | |
| dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| gpiod_set_value_cansleep(can_transceiver_phy->silent_gpio, 0); | |
| gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0); | |
| gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1); | |
| return 0; | |
| } | |
| /* Power off function */ | |
| static int can_transceiver_phy_power_off(struct phy *phy) | |
| { | |
| struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); | |
| struct can_transceiver_priv *priv = can_transceiver_phy->priv; | |
| gpiod_set_value_cansleep(can_transceiver_phy->silent_gpio, 1); | |
| gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1); | |
| gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0); | |
| if (priv->mux_state) | |
| mux_state_deselect(priv->mux_state); | |
| return 0; | |
| } | |
| static const struct phy_ops can_transceiver_phy_ops = { | |
| .power_on = can_transceiver_phy_power_on, | |
| .power_off = can_transceiver_phy_power_off, | |
| .owner = THIS_MODULE, | |
| }; | |
| static const struct can_transceiver_data tcan1042_drvdata = { | |
| .flags = CAN_TRANSCEIVER_STB_PRESENT, | |
| }; | |
| static const struct can_transceiver_data tcan1043_drvdata = { | |
| .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT, | |
| }; | |
| static const struct can_transceiver_data tja1048_drvdata = { | |
| .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_DUAL_CH, | |
| }; | |
| static const struct can_transceiver_data tja1051_drvdata = { | |
| .flags = CAN_TRANSCEIVER_SILENT_PRESENT | CAN_TRANSCEIVER_EN_PRESENT, | |
| }; | |
| static const struct can_transceiver_data tja1057_drvdata = { | |
| .flags = CAN_TRANSCEIVER_SILENT_PRESENT, | |
| }; | |
| static struct phy *can_transceiver_phy_xlate(struct device *dev, | |
| const struct of_phandle_args *args) | |
| { | |
| struct can_transceiver_priv *priv = dev_get_drvdata(dev); | |
| u32 idx; | |
| if (priv->num_ch == 1) | |
| return priv->can_transceiver_phy[0].generic_phy; | |
| if (args->args_count != 1) | |
| return ERR_PTR(-EINVAL); | |
| idx = args->args[0]; | |
| if (idx >= priv->num_ch) | |
| return ERR_PTR(-EINVAL); | |
| return priv->can_transceiver_phy[idx].generic_phy; | |
| } | |
| static int can_transceiver_phy_probe(struct platform_device *pdev) | |
| { | |
| struct phy_provider *phy_provider; | |
| struct device *dev = &pdev->dev; | |
| struct can_transceiver_phy *can_transceiver_phy; | |
| struct can_transceiver_priv *priv; | |
| const struct can_transceiver_data *drvdata; | |
| struct phy *phy; | |
| struct gpio_desc *silent_gpio; | |
| struct gpio_desc *standby_gpio; | |
| struct gpio_desc *enable_gpio; | |
| struct mux_state *mux_state; | |
| const char *propname; | |
| int err, i, num_ch; | |
| u32 max_bitrate; | |
| drvdata = device_get_match_data(dev); | |
| if (!drvdata) | |
| return -ENODEV; | |
| if (drvdata->flags & CAN_TRANSCEIVER_DUAL_CH) | |
| num_ch = 2; | |
| else | |
| num_ch = 1; | |
| priv = devm_kzalloc(dev, struct_size(priv, can_transceiver_phy, num_ch), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->num_ch = num_ch; | |
| platform_set_drvdata(pdev, priv); | |
| mux_state = devm_mux_state_get_optional(dev, NULL); | |
| if (IS_ERR(mux_state)) | |
| return PTR_ERR(mux_state); | |
| priv->mux_state = mux_state; | |
| propname = "max-bitrate"; | |
| if (device_property_present(dev, propname)) { | |
| err = device_property_read_u32(dev, propname, &max_bitrate); | |
| if (err) | |
| return dev_err_probe(dev, err, "failed to parse %s\n", propname); | |
| if (max_bitrate == 0) | |
| dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n"); | |
| } else { | |
| max_bitrate = 0; | |
| } | |
| for (i = 0; i < num_ch; i++) { | |
| can_transceiver_phy = &priv->can_transceiver_phy[i]; | |
| can_transceiver_phy->priv = priv; | |
| phy = devm_phy_create(dev, NULL, &can_transceiver_phy_ops); | |
| if (IS_ERR(phy)) { | |
| dev_err(dev, "failed to create can transceiver phy\n"); | |
| return PTR_ERR(phy); | |
| } | |
| phy->attrs.max_link_rate = max_bitrate; | |
| can_transceiver_phy->generic_phy = phy; | |
| can_transceiver_phy->priv = priv; | |
| if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) { | |
| standby_gpio = devm_gpiod_get_index_optional(dev, "standby", i, | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(standby_gpio)) | |
| return PTR_ERR(standby_gpio); | |
| can_transceiver_phy->standby_gpio = standby_gpio; | |
| } | |
| if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) { | |
| enable_gpio = devm_gpiod_get_index_optional(dev, "enable", i, | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(enable_gpio)) | |
| return PTR_ERR(enable_gpio); | |
| can_transceiver_phy->enable_gpio = enable_gpio; | |
| } | |
| if (drvdata->flags & CAN_TRANSCEIVER_SILENT_PRESENT) { | |
| silent_gpio = devm_gpiod_get_index_optional(dev, "silent", i, | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(silent_gpio)) | |
| return PTR_ERR(silent_gpio); | |
| can_transceiver_phy->silent_gpio = silent_gpio; | |
| } | |
| phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy); | |
| } | |
| phy_provider = devm_of_phy_provider_register(dev, can_transceiver_phy_xlate); | |
| return PTR_ERR_OR_ZERO(phy_provider); | |
| } | |
| static const struct of_device_id can_transceiver_phy_ids[] = { | |
| { | |
| .compatible = "ti,tcan1042", | |
| .data = &tcan1042_drvdata | |
| }, | |
| { | |
| .compatible = "ti,tcan1043", | |
| .data = &tcan1043_drvdata | |
| }, | |
| { | |
| .compatible = "nxp,tja1048", | |
| .data = &tja1048_drvdata | |
| }, | |
| { | |
| .compatible = "nxp,tja1051", | |
| .data = &tja1051_drvdata | |
| }, | |
| { | |
| .compatible = "nxp,tja1057", | |
| .data = &tja1057_drvdata | |
| }, | |
| { | |
| .compatible = "nxp,tjr1443", | |
| .data = &tcan1043_drvdata | |
| }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids); | |
| static struct platform_driver can_transceiver_phy_driver = { | |
| .probe = can_transceiver_phy_probe, | |
| .driver = { | |
| .name = "can-transceiver-phy", | |
| .of_match_table = can_transceiver_phy_ids, | |
| }, | |
| }; | |
| module_platform_driver(can_transceiver_phy_driver); | |
| MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>"); | |
| MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>"); | |
| MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver"); | |
| MODULE_LICENSE("GPL v2"); |