| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) | |
| // Copyright(c) 2015-2020 Intel Corporation. | |
| /* | |
| * Bandwidth management algorithm based on 2^n gears | |
| * | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/soundwire/sdw.h> | |
| #include "bus.h" | |
| #define SDW_STRM_RATE_GROUPING 1 | |
| struct sdw_group_params { | |
| unsigned int rate; | |
| unsigned int lane; | |
| int full_bw; | |
| int payload_bw; | |
| int hwidth; | |
| }; | |
| struct sdw_group { | |
| unsigned int count; | |
| unsigned int max_size; | |
| unsigned int *rates; | |
| unsigned int *lanes; | |
| }; | |
| void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt, | |
| struct sdw_transport_data *t_data) | |
| { | |
| struct sdw_slave_runtime *s_rt = NULL; | |
| struct sdw_port_runtime *p_rt; | |
| int port_bo, sample_int; | |
| unsigned int rate, bps, ch = 0; | |
| unsigned int slave_total_ch; | |
| struct sdw_bus_params *b_params = &m_rt->bus->params; | |
| port_bo = t_data->block_offset; | |
| list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { | |
| rate = m_rt->stream->params.rate; | |
| bps = m_rt->stream->params.bps; | |
| sample_int = (m_rt->bus->params.curr_dr_freq / rate); | |
| slave_total_ch = 0; | |
| list_for_each_entry(p_rt, &s_rt->port_list, port_node) { | |
| if (p_rt->lane != t_data->lane) | |
| continue; | |
| ch = hweight32(p_rt->ch_mask); | |
| sdw_fill_xport_params(&p_rt->transport_params, | |
| p_rt->num, false, | |
| SDW_BLK_GRP_CNT_1, | |
| sample_int, port_bo, port_bo >> 8, | |
| t_data->hstart, | |
| t_data->hstop, | |
| SDW_BLK_PKG_PER_PORT, p_rt->lane); | |
| sdw_fill_port_params(&p_rt->port_params, | |
| p_rt->num, bps, | |
| SDW_PORT_FLOW_MODE_ISOCH, | |
| b_params->s_data_mode); | |
| port_bo += bps * ch; | |
| slave_total_ch += ch; | |
| } | |
| if (m_rt->direction == SDW_DATA_DIR_TX && | |
| m_rt->ch_count == slave_total_ch) { | |
| /* | |
| * Slave devices were configured to access all channels | |
| * of the stream, which indicates that they operate in | |
| * 'mirror mode'. Make sure we reset the port offset for | |
| * the next device in the list | |
| */ | |
| port_bo = t_data->block_offset; | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(sdw_compute_slave_ports); | |
| static void sdw_compute_dp0_slave_ports(struct sdw_master_runtime *m_rt) | |
| { | |
| struct sdw_bus *bus = m_rt->bus; | |
| struct sdw_slave_runtime *s_rt; | |
| struct sdw_port_runtime *p_rt; | |
| list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { | |
| list_for_each_entry(p_rt, &s_rt->port_list, port_node) { | |
| sdw_fill_xport_params(&p_rt->transport_params, p_rt->num, false, | |
| SDW_BLK_GRP_CNT_1, bus->params.col, 0, 0, 1, | |
| bus->params.col - 1, SDW_BLK_PKG_PER_PORT, 0x0); | |
| sdw_fill_port_params(&p_rt->port_params, p_rt->num, bus->params.col - 1, | |
| SDW_PORT_FLOW_MODE_ISOCH, SDW_PORT_DATA_MODE_NORMAL); | |
| } | |
| } | |
| } | |
| static void sdw_compute_dp0_master_ports(struct sdw_master_runtime *m_rt) | |
| { | |
| struct sdw_port_runtime *p_rt; | |
| struct sdw_bus *bus = m_rt->bus; | |
| list_for_each_entry(p_rt, &m_rt->port_list, port_node) { | |
| sdw_fill_xport_params(&p_rt->transport_params, p_rt->num, false, | |
| SDW_BLK_GRP_CNT_1, bus->params.col, 0, 0, 1, | |
| bus->params.col - 1, SDW_BLK_PKG_PER_PORT, 0x0); | |
| sdw_fill_port_params(&p_rt->port_params, p_rt->num, bus->params.col - 1, | |
| SDW_PORT_FLOW_MODE_ISOCH, SDW_PORT_DATA_MODE_NORMAL); | |
| } | |
| } | |
| static void sdw_compute_dp0_port_params(struct sdw_bus *bus) | |
| { | |
| struct sdw_master_runtime *m_rt; | |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { | |
| /* DP0 is for BPT only */ | |
| if (m_rt->stream->type != SDW_STREAM_BPT) | |
| continue; | |
| sdw_compute_dp0_master_ports(m_rt); | |
| sdw_compute_dp0_slave_ports(m_rt); | |
| } | |
| } | |
| static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt, | |
| struct sdw_group_params *params, | |
| int *port_bo, int hstop) | |
| { | |
| struct sdw_transport_data t_data = {0}; | |
| struct sdw_port_runtime *p_rt; | |
| struct sdw_bus *bus = m_rt->bus; | |
| struct sdw_bus_params *b_params = &bus->params; | |
| int sample_int, hstart = 0; | |
| unsigned int rate, bps, ch; | |
| rate = m_rt->stream->params.rate; | |
| bps = m_rt->stream->params.bps; | |
| ch = m_rt->ch_count; | |
| sample_int = (bus->params.curr_dr_freq / rate); | |
| if (rate != params->rate) | |
| return; | |
| t_data.hstop = hstop; | |
| hstart = hstop - params->hwidth + 1; | |
| t_data.hstart = hstart; | |
| list_for_each_entry(p_rt, &m_rt->port_list, port_node) { | |
| if (p_rt->lane != params->lane) | |
| continue; | |
| sdw_fill_xport_params(&p_rt->transport_params, p_rt->num, | |
| false, SDW_BLK_GRP_CNT_1, sample_int, | |
| *port_bo, (*port_bo) >> 8, hstart, hstop, | |
| SDW_BLK_PKG_PER_PORT, p_rt->lane); | |
| sdw_fill_port_params(&p_rt->port_params, | |
| p_rt->num, bps, | |
| SDW_PORT_FLOW_MODE_ISOCH, | |
| b_params->m_data_mode); | |
| /* Check for first entry */ | |
| if (!(p_rt == list_first_entry(&m_rt->port_list, | |
| struct sdw_port_runtime, | |
| port_node))) { | |
| (*port_bo) += bps * ch; | |
| continue; | |
| } | |
| t_data.hstart = hstart; | |
| t_data.hstop = hstop; | |
| t_data.block_offset = *port_bo; | |
| t_data.sub_block_offset = 0; | |
| (*port_bo) += bps * ch; | |
| } | |
| t_data.lane = params->lane; | |
| sdw_compute_slave_ports(m_rt, &t_data); | |
| } | |
| static void _sdw_compute_port_params(struct sdw_bus *bus, | |
| struct sdw_group_params *params, int count) | |
| { | |
| struct sdw_master_runtime *m_rt; | |
| int port_bo, i, l; | |
| int hstop; | |
| /* Run loop for all groups to compute transport parameters */ | |
| for (l = 0; l < SDW_MAX_LANES; l++) { | |
| if (l > 0 && !bus->lane_used_bandwidth[l]) | |
| continue; | |
| /* reset hstop for each lane */ | |
| hstop = bus->params.col - 1; | |
| for (i = 0; i < count; i++) { | |
| if (params[i].lane != l) | |
| continue; | |
| port_bo = 1; | |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { | |
| /* | |
| * Only runtimes with CONFIGURED, PREPARED, ENABLED, and DISABLED | |
| * states should be included in the bandwidth calculation. | |
| */ | |
| if (m_rt->stream->state > SDW_STREAM_DISABLED || | |
| m_rt->stream->state < SDW_STREAM_CONFIGURED) | |
| continue; | |
| sdw_compute_master_ports(m_rt, ¶ms[i], &port_bo, hstop); | |
| } | |
| hstop = hstop - params[i].hwidth; | |
| } | |
| } | |
| } | |
| static int sdw_compute_group_params(struct sdw_bus *bus, | |
| struct sdw_stream_runtime *stream, | |
| struct sdw_group_params *params, | |
| struct sdw_group *group) | |
| { | |
| struct sdw_master_runtime *m_rt; | |
| struct sdw_port_runtime *p_rt; | |
| int sel_col = bus->params.col; | |
| unsigned int rate, bps, ch; | |
| int i, l, column_needed; | |
| /* Calculate bandwidth per group */ | |
| for (i = 0; i < group->count; i++) { | |
| params[i].rate = group->rates[i]; | |
| params[i].lane = group->lanes[i]; | |
| params[i].full_bw = bus->params.curr_dr_freq / params[i].rate; | |
| } | |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { | |
| if (m_rt->stream == stream) { | |
| /* Only runtime during prepare should be added */ | |
| if (stream->state != SDW_STREAM_CONFIGURED) | |
| continue; | |
| } else { | |
| /* | |
| * Include runtimes with running (ENABLED/PREPARED state) and | |
| * paused (DISABLED state) streams | |
| */ | |
| if (m_rt->stream->state != SDW_STREAM_ENABLED && | |
| m_rt->stream->state != SDW_STREAM_PREPARED && | |
| m_rt->stream->state != SDW_STREAM_DISABLED) | |
| continue; | |
| } | |
| list_for_each_entry(p_rt, &m_rt->port_list, port_node) { | |
| rate = m_rt->stream->params.rate; | |
| bps = m_rt->stream->params.bps; | |
| ch = hweight32(p_rt->ch_mask); | |
| for (i = 0; i < group->count; i++) { | |
| if (rate == params[i].rate && p_rt->lane == params[i].lane) | |
| params[i].payload_bw += bps * ch; | |
| } | |
| } | |
| } | |
| for (l = 0; l < SDW_MAX_LANES; l++) { | |
| if (l > 0 && !bus->lane_used_bandwidth[l]) | |
| continue; | |
| /* reset column_needed for each lane */ | |
| column_needed = 0; | |
| for (i = 0; i < group->count; i++) { | |
| if (params[i].lane != l) | |
| continue; | |
| params[i].hwidth = (sel_col * params[i].payload_bw + | |
| params[i].full_bw - 1) / params[i].full_bw; | |
| column_needed += params[i].hwidth; | |
| /* There is no control column for lane 1 and above */ | |
| if (column_needed > sel_col) | |
| return -EINVAL; | |
| /* Column 0 is control column on lane 0 */ | |
| if (params[i].lane == 0 && column_needed > sel_col - 1) | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int sdw_add_element_group_count(struct sdw_group *group, | |
| unsigned int rate, unsigned int lane) | |
| { | |
| int num = group->count; | |
| int i; | |
| for (i = 0; i < num; i++) { | |
| if (rate == group->rates[i] && lane == group->lanes[i]) | |
| return 0; | |
| } | |
| if (group->count >= group->max_size) { | |
| unsigned int *rates; | |
| unsigned int *lanes; | |
| rates = krealloc_array(group->rates, group->max_size + 1, | |
| sizeof(*group->rates), GFP_KERNEL); | |
| if (!rates) | |
| return -ENOMEM; | |
| group->rates = rates; | |
| lanes = krealloc_array(group->lanes, group->max_size + 1, | |
| sizeof(*group->lanes), GFP_KERNEL); | |
| if (!lanes) | |
| return -ENOMEM; | |
| group->lanes = lanes; | |
| group->max_size += 1; | |
| } | |
| group->rates[group->count] = rate; | |
| group->lanes[group->count++] = lane; | |
| return 0; | |
| } | |
| static int sdw_get_group_count(struct sdw_bus *bus, | |
| struct sdw_group *group) | |
| { | |
| struct sdw_master_runtime *m_rt; | |
| struct sdw_port_runtime *p_rt; | |
| unsigned int rate; | |
| int ret = 0; | |
| group->count = 0; | |
| group->max_size = SDW_STRM_RATE_GROUPING; | |
| group->rates = kcalloc(group->max_size, sizeof(int), GFP_KERNEL); | |
| if (!group->rates) | |
| return -ENOMEM; | |
| group->lanes = kcalloc(group->max_size, sizeof(int), GFP_KERNEL); | |
| if (!group->lanes) { | |
| kfree(group->rates); | |
| group->rates = NULL; | |
| return -ENOMEM; | |
| } | |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { | |
| if (m_rt->stream->state == SDW_STREAM_DEPREPARED) | |
| continue; | |
| rate = m_rt->stream->params.rate; | |
| if (m_rt == list_first_entry(&bus->m_rt_list, | |
| struct sdw_master_runtime, | |
| bus_node)) { | |
| group->rates[group->count++] = rate; | |
| } | |
| /* | |
| * Different ports could use different lane, add group element | |
| * even if m_rt is the first entry | |
| */ | |
| list_for_each_entry(p_rt, &m_rt->port_list, port_node) { | |
| ret = sdw_add_element_group_count(group, rate, p_rt->lane); | |
| if (ret < 0) { | |
| kfree(group->rates); | |
| kfree(group->lanes); | |
| return ret; | |
| } | |
| } | |
| } | |
| return ret; | |
| } | |
| /** | |
| * sdw_compute_port_params: Compute transport and port parameters | |
| * | |
| * @bus: SDW Bus instance | |
| * @stream: Soundwire stream | |
| */ | |
| static int sdw_compute_port_params(struct sdw_bus *bus, struct sdw_stream_runtime *stream) | |
| { | |
| struct sdw_group_params *params = NULL; | |
| struct sdw_group group; | |
| int ret; | |
| ret = sdw_get_group_count(bus, &group); | |
| if (ret < 0) | |
| return ret; | |
| if (group.count == 0) | |
| goto out; | |
| params = kzalloc_objs(*params, group.count); | |
| if (!params) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| /* Compute transport parameters for grouped streams */ | |
| ret = sdw_compute_group_params(bus, stream, params, &group); | |
| if (ret < 0) | |
| goto free_params; | |
| _sdw_compute_port_params(bus, params, group.count); | |
| free_params: | |
| kfree(params); | |
| out: | |
| kfree(group.rates); | |
| kfree(group.lanes); | |
| return ret; | |
| } | |
| static int sdw_select_row_col(struct sdw_bus *bus, int clk_freq) | |
| { | |
| struct sdw_master_prop *prop = &bus->prop; | |
| int r, c; | |
| for (c = 0; c < SDW_FRAME_COLS; c++) { | |
| for (r = 0; r < SDW_FRAME_ROWS; r++) { | |
| if (sdw_rows[r] != prop->default_row || | |
| sdw_cols[c] != prop->default_col) | |
| continue; | |
| if (clk_freq * (sdw_cols[c] - 1) < | |
| bus->params.bandwidth * sdw_cols[c]) | |
| continue; | |
| bus->params.row = sdw_rows[r]; | |
| bus->params.col = sdw_cols[c]; | |
| return 0; | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| static bool is_clock_scaling_supported(struct sdw_bus *bus) | |
| { | |
| struct sdw_master_runtime *m_rt; | |
| struct sdw_slave_runtime *s_rt; | |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) | |
| list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) | |
| if (!is_clock_scaling_supported_by_slave(s_rt->slave)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * is_lane_connected_to_all_peripherals: Check if the given manager lane connects to all peripherals | |
| * So that all peripherals can use the manager lane. | |
| * | |
| * @m_rt: Manager runtime | |
| * @lane: Lane number | |
| */ | |
| static bool is_lane_connected_to_all_peripherals(struct sdw_master_runtime *m_rt, unsigned int lane) | |
| { | |
| struct sdw_slave_prop *slave_prop; | |
| struct sdw_slave_runtime *s_rt; | |
| int i; | |
| list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { | |
| slave_prop = &s_rt->slave->prop; | |
| for (i = 1; i < SDW_MAX_LANES; i++) { | |
| if (slave_prop->lane_maps[i] == lane) { | |
| dev_dbg(&s_rt->slave->dev, | |
| "M lane %d is connected to P lane %d\n", | |
| lane, i); | |
| break; | |
| } | |
| } | |
| if (i == SDW_MAX_LANES) { | |
| dev_dbg(&s_rt->slave->dev, "M lane %d is not connected\n", lane); | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| static int get_manager_lane(struct sdw_bus *bus, struct sdw_master_runtime *m_rt, | |
| struct sdw_slave_runtime *s_rt, unsigned int curr_dr_freq) | |
| { | |
| struct sdw_slave_prop *slave_prop = &s_rt->slave->prop; | |
| struct sdw_port_runtime *m_p_rt; | |
| unsigned int required_bandwidth; | |
| int m_lane; | |
| int l; | |
| for (l = 1; l < SDW_MAX_LANES; l++) { | |
| if (!slave_prop->lane_maps[l]) | |
| continue; | |
| required_bandwidth = 0; | |
| list_for_each_entry(m_p_rt, &m_rt->port_list, port_node) { | |
| required_bandwidth += m_rt->stream->params.rate * | |
| hweight32(m_p_rt->ch_mask) * | |
| m_rt->stream->params.bps; | |
| } | |
| if (required_bandwidth <= | |
| curr_dr_freq - bus->lane_used_bandwidth[l]) { | |
| /* Check if m_lane is connected to all Peripherals */ | |
| if (!is_lane_connected_to_all_peripherals(m_rt, | |
| slave_prop->lane_maps[l])) { | |
| dev_dbg(bus->dev, | |
| "Not all Peripherals are connected to M lane %d\n", | |
| slave_prop->lane_maps[l]); | |
| continue; | |
| } | |
| m_lane = slave_prop->lane_maps[l]; | |
| dev_dbg(&s_rt->slave->dev, "M lane %d is used\n", m_lane); | |
| bus->lane_used_bandwidth[l] += required_bandwidth; | |
| /* | |
| * Use non-zero manager lane, subtract the lane 0 | |
| * bandwidth that is already calculated | |
| */ | |
| bus->params.bandwidth -= required_bandwidth; | |
| return m_lane; | |
| } | |
| } | |
| /* No available multi lane found, only lane 0 can be used */ | |
| return 0; | |
| } | |
| /** | |
| * sdw_compute_bus_params: Compute bus parameters | |
| * | |
| * @bus: SDW Bus instance | |
| */ | |
| static int sdw_compute_bus_params(struct sdw_bus *bus) | |
| { | |
| struct sdw_master_prop *mstr_prop = &bus->prop; | |
| struct sdw_slave_prop *slave_prop; | |
| struct sdw_port_runtime *m_p_rt; | |
| struct sdw_port_runtime *s_p_rt; | |
| struct sdw_master_runtime *m_rt; | |
| struct sdw_slave_runtime *s_rt; | |
| unsigned int curr_dr_freq = 0; | |
| int i, l, clk_values, ret; | |
| bool is_gear = false; | |
| int m_lane = 0; | |
| u32 *clk_buf; | |
| if (mstr_prop->num_clk_gears) { | |
| clk_values = mstr_prop->num_clk_gears; | |
| clk_buf = mstr_prop->clk_gears; | |
| is_gear = true; | |
| } else if (mstr_prop->num_clk_freq) { | |
| clk_values = mstr_prop->num_clk_freq; | |
| clk_buf = mstr_prop->clk_freq; | |
| } else { | |
| clk_values = 1; | |
| clk_buf = NULL; | |
| } | |
| /* If dynamic scaling is not supported, don't try higher freq */ | |
| if (!is_clock_scaling_supported(bus)) | |
| clk_values = 1; | |
| for (i = 0; i < clk_values; i++) { | |
| if (!clk_buf) | |
| curr_dr_freq = bus->params.max_dr_freq; | |
| else | |
| curr_dr_freq = (is_gear) ? | |
| (bus->params.max_dr_freq >> clk_buf[i]) : | |
| clk_buf[i] * SDW_DOUBLE_RATE_FACTOR; | |
| if (curr_dr_freq * (mstr_prop->default_col - 1) >= | |
| bus->params.bandwidth * mstr_prop->default_col) | |
| break; | |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { | |
| /* | |
| * Get the first s_rt that will be used to find the available lane that | |
| * can be used. No need to check all Peripherals because we can't use | |
| * multi-lane if we can't find any available lane for the first Peripheral. | |
| */ | |
| s_rt = list_first_entry(&m_rt->slave_rt_list, | |
| struct sdw_slave_runtime, m_rt_node); | |
| /* | |
| * Find the available Manager lane that connected to the first Peripheral. | |
| */ | |
| m_lane = get_manager_lane(bus, m_rt, s_rt, curr_dr_freq); | |
| if (m_lane > 0) | |
| goto out; | |
| } | |
| /* | |
| * TODO: Check all the Slave(s) port(s) audio modes and find | |
| * whether given clock rate is supported with glitchless | |
| * transition. | |
| */ | |
| } | |
| if (i == clk_values) { | |
| dev_err(bus->dev, "%s: could not find clock value for bandwidth %d\n", | |
| __func__, bus->params.bandwidth); | |
| return -EINVAL; | |
| } | |
| out: | |
| /* multilane can be used */ | |
| if (m_lane > 0) { | |
| /* Set Peripheral lanes */ | |
| list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { | |
| slave_prop = &s_rt->slave->prop; | |
| for (l = 1; l < SDW_MAX_LANES; l++) { | |
| if (slave_prop->lane_maps[l] == m_lane) { | |
| list_for_each_entry(s_p_rt, &s_rt->port_list, port_node) { | |
| s_p_rt->lane = l; | |
| dev_dbg(&s_rt->slave->dev, | |
| "Set P lane %d for port %d\n", | |
| l, s_p_rt->num); | |
| } | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * Set Manager lanes. Configure the last m_rt in bus->m_rt_list only since | |
| * we don't want to touch other m_rts that are already working. | |
| */ | |
| list_for_each_entry(m_p_rt, &m_rt->port_list, port_node) { | |
| m_p_rt->lane = m_lane; | |
| } | |
| } | |
| if (!mstr_prop->default_frame_rate || !mstr_prop->default_row) | |
| return -EINVAL; | |
| mstr_prop->default_col = curr_dr_freq / mstr_prop->default_frame_rate / | |
| mstr_prop->default_row; | |
| ret = sdw_select_row_col(bus, curr_dr_freq); | |
| if (ret < 0) { | |
| dev_err(bus->dev, "%s: could not find frame configuration for bus dr_freq %d\n", | |
| __func__, curr_dr_freq); | |
| return -EINVAL; | |
| } | |
| bus->params.curr_dr_freq = curr_dr_freq; | |
| return 0; | |
| } | |
| /** | |
| * sdw_compute_params: Compute bus, transport and port parameters | |
| * | |
| * @bus: SDW Bus instance | |
| * @stream: Soundwire stream | |
| */ | |
| int sdw_compute_params(struct sdw_bus *bus, struct sdw_stream_runtime *stream) | |
| { | |
| int ret; | |
| /* Computes clock frequency, frame shape and frame frequency */ | |
| ret = sdw_compute_bus_params(bus); | |
| if (ret < 0) | |
| return ret; | |
| if (stream->type == SDW_STREAM_BPT) { | |
| sdw_compute_dp0_port_params(bus); | |
| return 0; | |
| } | |
| /* Compute transport and port params */ | |
| ret = sdw_compute_port_params(bus, stream); | |
| if (ret < 0) { | |
| dev_err(bus->dev, "Compute transport params failed: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(sdw_compute_params); | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| MODULE_DESCRIPTION("SoundWire Generic Bandwidth Allocation"); |