|  | /* | 
|  | *  linux/fs/ext4/indirect.c | 
|  | * | 
|  | *  from | 
|  | * | 
|  | *  linux/fs/ext4/inode.c | 
|  | * | 
|  | * Copyright (C) 1992, 1993, 1994, 1995 | 
|  | * Remy Card (card@masi.ibp.fr) | 
|  | * Laboratoire MASI - Institut Blaise Pascal | 
|  | * Universite Pierre et Marie Curie (Paris VI) | 
|  | * | 
|  | *  from | 
|  | * | 
|  | *  linux/fs/minix/inode.c | 
|  | * | 
|  | *  Copyright (C) 1991, 1992  Linus Torvalds | 
|  | * | 
|  | *  Goal-directed block allocation by Stephen Tweedie | 
|  | *	(sct@redhat.com), 1993, 1998 | 
|  | */ | 
|  |  | 
|  | #include <linux/aio.h> | 
|  | #include "ext4_jbd2.h" | 
|  | #include "truncate.h" | 
|  | #include "ext4_extents.h"	/* Needed for EXT_MAX_BLOCKS */ | 
|  |  | 
|  | #include <trace/events/ext4.h> | 
|  |  | 
|  | typedef struct { | 
|  | __le32	*p; | 
|  | __le32	key; | 
|  | struct buffer_head *bh; | 
|  | } Indirect; | 
|  |  | 
|  | static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) | 
|  | { | 
|  | p->key = *(p->p = v); | 
|  | p->bh = bh; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_block_to_path - parse the block number into array of offsets | 
|  | *	@inode: inode in question (we are only interested in its superblock) | 
|  | *	@i_block: block number to be parsed | 
|  | *	@offsets: array to store the offsets in | 
|  | *	@boundary: set this non-zero if the referred-to block is likely to be | 
|  | *	       followed (on disk) by an indirect block. | 
|  | * | 
|  | *	To store the locations of file's data ext4 uses a data structure common | 
|  | *	for UNIX filesystems - tree of pointers anchored in the inode, with | 
|  | *	data blocks at leaves and indirect blocks in intermediate nodes. | 
|  | *	This function translates the block number into path in that tree - | 
|  | *	return value is the path length and @offsets[n] is the offset of | 
|  | *	pointer to (n+1)th node in the nth one. If @block is out of range | 
|  | *	(negative or too large) warning is printed and zero returned. | 
|  | * | 
|  | *	Note: function doesn't find node addresses, so no IO is needed. All | 
|  | *	we need to know is the capacity of indirect blocks (taken from the | 
|  | *	inode->i_sb). | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Portability note: the last comparison (check that we fit into triple | 
|  | * indirect block) is spelled differently, because otherwise on an | 
|  | * architecture with 32-bit longs and 8Kb pages we might get into trouble | 
|  | * if our filesystem had 8Kb blocks. We might use long long, but that would | 
|  | * kill us on x86. Oh, well, at least the sign propagation does not matter - | 
|  | * i_block would have to be negative in the very beginning, so we would not | 
|  | * get there at all. | 
|  | */ | 
|  |  | 
|  | static int ext4_block_to_path(struct inode *inode, | 
|  | ext4_lblk_t i_block, | 
|  | ext4_lblk_t offsets[4], int *boundary) | 
|  | { | 
|  | int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); | 
|  | const long direct_blocks = EXT4_NDIR_BLOCKS, | 
|  | indirect_blocks = ptrs, | 
|  | double_blocks = (1 << (ptrs_bits * 2)); | 
|  | int n = 0; | 
|  | int final = 0; | 
|  |  | 
|  | if (i_block < direct_blocks) { | 
|  | offsets[n++] = i_block; | 
|  | final = direct_blocks; | 
|  | } else if ((i_block -= direct_blocks) < indirect_blocks) { | 
|  | offsets[n++] = EXT4_IND_BLOCK; | 
|  | offsets[n++] = i_block; | 
|  | final = ptrs; | 
|  | } else if ((i_block -= indirect_blocks) < double_blocks) { | 
|  | offsets[n++] = EXT4_DIND_BLOCK; | 
|  | offsets[n++] = i_block >> ptrs_bits; | 
|  | offsets[n++] = i_block & (ptrs - 1); | 
|  | final = ptrs; | 
|  | } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { | 
|  | offsets[n++] = EXT4_TIND_BLOCK; | 
|  | offsets[n++] = i_block >> (ptrs_bits * 2); | 
|  | offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); | 
|  | offsets[n++] = i_block & (ptrs - 1); | 
|  | final = ptrs; | 
|  | } else { | 
|  | ext4_warning(inode->i_sb, "block %lu > max in inode %lu", | 
|  | i_block + direct_blocks + | 
|  | indirect_blocks + double_blocks, inode->i_ino); | 
|  | } | 
|  | if (boundary) | 
|  | *boundary = final - 1 - (i_block & (ptrs - 1)); | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_get_branch - read the chain of indirect blocks leading to data | 
|  | *	@inode: inode in question | 
|  | *	@depth: depth of the chain (1 - direct pointer, etc.) | 
|  | *	@offsets: offsets of pointers in inode/indirect blocks | 
|  | *	@chain: place to store the result | 
|  | *	@err: here we store the error value | 
|  | * | 
|  | *	Function fills the array of triples <key, p, bh> and returns %NULL | 
|  | *	if everything went OK or the pointer to the last filled triple | 
|  | *	(incomplete one) otherwise. Upon the return chain[i].key contains | 
|  | *	the number of (i+1)-th block in the chain (as it is stored in memory, | 
|  | *	i.e. little-endian 32-bit), chain[i].p contains the address of that | 
|  | *	number (it points into struct inode for i==0 and into the bh->b_data | 
|  | *	for i>0) and chain[i].bh points to the buffer_head of i-th indirect | 
|  | *	block for i>0 and NULL for i==0. In other words, it holds the block | 
|  | *	numbers of the chain, addresses they were taken from (and where we can | 
|  | *	verify that chain did not change) and buffer_heads hosting these | 
|  | *	numbers. | 
|  | * | 
|  | *	Function stops when it stumbles upon zero pointer (absent block) | 
|  | *		(pointer to last triple returned, *@err == 0) | 
|  | *	or when it gets an IO error reading an indirect block | 
|  | *		(ditto, *@err == -EIO) | 
|  | *	or when it reads all @depth-1 indirect blocks successfully and finds | 
|  | *	the whole chain, all way to the data (returns %NULL, *err == 0). | 
|  | * | 
|  | *      Need to be called with | 
|  | *      down_read(&EXT4_I(inode)->i_data_sem) | 
|  | */ | 
|  | static Indirect *ext4_get_branch(struct inode *inode, int depth, | 
|  | ext4_lblk_t  *offsets, | 
|  | Indirect chain[4], int *err) | 
|  | { | 
|  | struct super_block *sb = inode->i_sb; | 
|  | Indirect *p = chain; | 
|  | struct buffer_head *bh; | 
|  | int ret = -EIO; | 
|  |  | 
|  | *err = 0; | 
|  | /* i_data is not going away, no lock needed */ | 
|  | add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); | 
|  | if (!p->key) | 
|  | goto no_block; | 
|  | while (--depth) { | 
|  | bh = sb_getblk(sb, le32_to_cpu(p->key)); | 
|  | if (unlikely(!bh)) { | 
|  | ret = -ENOMEM; | 
|  | goto failure; | 
|  | } | 
|  |  | 
|  | if (!bh_uptodate_or_lock(bh)) { | 
|  | if (bh_submit_read(bh) < 0) { | 
|  | put_bh(bh); | 
|  | goto failure; | 
|  | } | 
|  | /* validate block references */ | 
|  | if (ext4_check_indirect_blockref(inode, bh)) { | 
|  | put_bh(bh); | 
|  | goto failure; | 
|  | } | 
|  | } | 
|  |  | 
|  | add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); | 
|  | /* Reader: end */ | 
|  | if (!p->key) | 
|  | goto no_block; | 
|  | } | 
|  | return NULL; | 
|  |  | 
|  | failure: | 
|  | *err = ret; | 
|  | no_block: | 
|  | return p; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_find_near - find a place for allocation with sufficient locality | 
|  | *	@inode: owner | 
|  | *	@ind: descriptor of indirect block. | 
|  | * | 
|  | *	This function returns the preferred place for block allocation. | 
|  | *	It is used when heuristic for sequential allocation fails. | 
|  | *	Rules are: | 
|  | *	  + if there is a block to the left of our position - allocate near it. | 
|  | *	  + if pointer will live in indirect block - allocate near that block. | 
|  | *	  + if pointer will live in inode - allocate in the same | 
|  | *	    cylinder group. | 
|  | * | 
|  | * In the latter case we colour the starting block by the callers PID to | 
|  | * prevent it from clashing with concurrent allocations for a different inode | 
|  | * in the same block group.   The PID is used here so that functionally related | 
|  | * files will be close-by on-disk. | 
|  | * | 
|  | *	Caller must make sure that @ind is valid and will stay that way. | 
|  | */ | 
|  | static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) | 
|  | { | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; | 
|  | __le32 *p; | 
|  |  | 
|  | /* Try to find previous block */ | 
|  | for (p = ind->p - 1; p >= start; p--) { | 
|  | if (*p) | 
|  | return le32_to_cpu(*p); | 
|  | } | 
|  |  | 
|  | /* No such thing, so let's try location of indirect block */ | 
|  | if (ind->bh) | 
|  | return ind->bh->b_blocknr; | 
|  |  | 
|  | /* | 
|  | * It is going to be referred to from the inode itself? OK, just put it | 
|  | * into the same cylinder group then. | 
|  | */ | 
|  | return ext4_inode_to_goal_block(inode); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_find_goal - find a preferred place for allocation. | 
|  | *	@inode: owner | 
|  | *	@block:  block we want | 
|  | *	@partial: pointer to the last triple within a chain | 
|  | * | 
|  | *	Normally this function find the preferred place for block allocation, | 
|  | *	returns it. | 
|  | *	Because this is only used for non-extent files, we limit the block nr | 
|  | *	to 32 bits. | 
|  | */ | 
|  | static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, | 
|  | Indirect *partial) | 
|  | { | 
|  | ext4_fsblk_t goal; | 
|  |  | 
|  | /* | 
|  | * XXX need to get goal block from mballoc's data structures | 
|  | */ | 
|  |  | 
|  | goal = ext4_find_near(inode, partial); | 
|  | goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; | 
|  | return goal; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_blks_to_allocate - Look up the block map and count the number | 
|  | *	of direct blocks need to be allocated for the given branch. | 
|  | * | 
|  | *	@branch: chain of indirect blocks | 
|  | *	@k: number of blocks need for indirect blocks | 
|  | *	@blks: number of data blocks to be mapped. | 
|  | *	@blocks_to_boundary:  the offset in the indirect block | 
|  | * | 
|  | *	return the total number of blocks to be allocate, including the | 
|  | *	direct and indirect blocks. | 
|  | */ | 
|  | static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, | 
|  | int blocks_to_boundary) | 
|  | { | 
|  | unsigned int count = 0; | 
|  |  | 
|  | /* | 
|  | * Simple case, [t,d]Indirect block(s) has not allocated yet | 
|  | * then it's clear blocks on that path have not allocated | 
|  | */ | 
|  | if (k > 0) { | 
|  | /* right now we don't handle cross boundary allocation */ | 
|  | if (blks < blocks_to_boundary + 1) | 
|  | count += blks; | 
|  | else | 
|  | count += blocks_to_boundary + 1; | 
|  | return count; | 
|  | } | 
|  |  | 
|  | count++; | 
|  | while (count < blks && count <= blocks_to_boundary && | 
|  | le32_to_cpu(*(branch[0].p + count)) == 0) { | 
|  | count++; | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_alloc_branch - allocate and set up a chain of blocks. | 
|  | *	@handle: handle for this transaction | 
|  | *	@inode: owner | 
|  | *	@indirect_blks: number of allocated indirect blocks | 
|  | *	@blks: number of allocated direct blocks | 
|  | *	@goal: preferred place for allocation | 
|  | *	@offsets: offsets (in the blocks) to store the pointers to next. | 
|  | *	@branch: place to store the chain in. | 
|  | * | 
|  | *	This function allocates blocks, zeroes out all but the last one, | 
|  | *	links them into chain and (if we are synchronous) writes them to disk. | 
|  | *	In other words, it prepares a branch that can be spliced onto the | 
|  | *	inode. It stores the information about that chain in the branch[], in | 
|  | *	the same format as ext4_get_branch() would do. We are calling it after | 
|  | *	we had read the existing part of chain and partial points to the last | 
|  | *	triple of that (one with zero ->key). Upon the exit we have the same | 
|  | *	picture as after the successful ext4_get_block(), except that in one | 
|  | *	place chain is disconnected - *branch->p is still zero (we did not | 
|  | *	set the last link), but branch->key contains the number that should | 
|  | *	be placed into *branch->p to fill that gap. | 
|  | * | 
|  | *	If allocation fails we free all blocks we've allocated (and forget | 
|  | *	their buffer_heads) and return the error value the from failed | 
|  | *	ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain | 
|  | *	as described above and return 0. | 
|  | */ | 
|  | static int ext4_alloc_branch(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t iblock, int indirect_blks, | 
|  | int *blks, ext4_fsblk_t goal, | 
|  | ext4_lblk_t *offsets, Indirect *branch) | 
|  | { | 
|  | struct ext4_allocation_request	ar; | 
|  | struct buffer_head *		bh; | 
|  | ext4_fsblk_t			b, new_blocks[4]; | 
|  | __le32				*p; | 
|  | int				i, j, err, len = 1; | 
|  |  | 
|  | /* | 
|  | * Set up for the direct block allocation | 
|  | */ | 
|  | memset(&ar, 0, sizeof(ar)); | 
|  | ar.inode = inode; | 
|  | ar.len = *blks; | 
|  | ar.logical = iblock; | 
|  | if (S_ISREG(inode->i_mode)) | 
|  | ar.flags = EXT4_MB_HINT_DATA; | 
|  |  | 
|  | for (i = 0; i <= indirect_blks; i++) { | 
|  | if (i == indirect_blks) { | 
|  | ar.goal = goal; | 
|  | new_blocks[i] = ext4_mb_new_blocks(handle, &ar, &err); | 
|  | } else | 
|  | goal = new_blocks[i] = ext4_new_meta_blocks(handle, inode, | 
|  | goal, 0, NULL, &err); | 
|  | if (err) { | 
|  | i--; | 
|  | goto failed; | 
|  | } | 
|  | branch[i].key = cpu_to_le32(new_blocks[i]); | 
|  | if (i == 0) | 
|  | continue; | 
|  |  | 
|  | bh = branch[i].bh = sb_getblk(inode->i_sb, new_blocks[i-1]); | 
|  | if (unlikely(!bh)) { | 
|  | err = -ENOMEM; | 
|  | goto failed; | 
|  | } | 
|  | lock_buffer(bh); | 
|  | BUFFER_TRACE(bh, "call get_create_access"); | 
|  | err = ext4_journal_get_create_access(handle, bh); | 
|  | if (err) { | 
|  | unlock_buffer(bh); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | memset(bh->b_data, 0, bh->b_size); | 
|  | p = branch[i].p = (__le32 *) bh->b_data + offsets[i]; | 
|  | b = new_blocks[i]; | 
|  |  | 
|  | if (i == indirect_blks) | 
|  | len = ar.len; | 
|  | for (j = 0; j < len; j++) | 
|  | *p++ = cpu_to_le32(b++); | 
|  |  | 
|  | BUFFER_TRACE(bh, "marking uptodate"); | 
|  | set_buffer_uptodate(bh); | 
|  | unlock_buffer(bh); | 
|  |  | 
|  | BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
|  | err = ext4_handle_dirty_metadata(handle, inode, bh); | 
|  | if (err) | 
|  | goto failed; | 
|  | } | 
|  | *blks = ar.len; | 
|  | return 0; | 
|  | failed: | 
|  | for (; i >= 0; i--) { | 
|  | if (i != indirect_blks && branch[i].bh) | 
|  | ext4_forget(handle, 1, inode, branch[i].bh, | 
|  | branch[i].bh->b_blocknr); | 
|  | ext4_free_blocks(handle, inode, NULL, new_blocks[i], | 
|  | (i == indirect_blks) ? ar.len : 1, 0); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ext4_splice_branch - splice the allocated branch onto inode. | 
|  | * @handle: handle for this transaction | 
|  | * @inode: owner | 
|  | * @block: (logical) number of block we are adding | 
|  | * @chain: chain of indirect blocks (with a missing link - see | 
|  | *	ext4_alloc_branch) | 
|  | * @where: location of missing link | 
|  | * @num:   number of indirect blocks we are adding | 
|  | * @blks:  number of direct blocks we are adding | 
|  | * | 
|  | * This function fills the missing link and does all housekeeping needed in | 
|  | * inode (->i_blocks, etc.). In case of success we end up with the full | 
|  | * chain to new block and return 0. | 
|  | */ | 
|  | static int ext4_splice_branch(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t block, Indirect *where, int num, | 
|  | int blks) | 
|  | { | 
|  | int i; | 
|  | int err = 0; | 
|  | ext4_fsblk_t current_block; | 
|  |  | 
|  | /* | 
|  | * If we're splicing into a [td]indirect block (as opposed to the | 
|  | * inode) then we need to get write access to the [td]indirect block | 
|  | * before the splice. | 
|  | */ | 
|  | if (where->bh) { | 
|  | BUFFER_TRACE(where->bh, "get_write_access"); | 
|  | err = ext4_journal_get_write_access(handle, where->bh); | 
|  | if (err) | 
|  | goto err_out; | 
|  | } | 
|  | /* That's it */ | 
|  |  | 
|  | *where->p = where->key; | 
|  |  | 
|  | /* | 
|  | * Update the host buffer_head or inode to point to more just allocated | 
|  | * direct blocks blocks | 
|  | */ | 
|  | if (num == 0 && blks > 1) { | 
|  | current_block = le32_to_cpu(where->key) + 1; | 
|  | for (i = 1; i < blks; i++) | 
|  | *(where->p + i) = cpu_to_le32(current_block++); | 
|  | } | 
|  |  | 
|  | /* We are done with atomic stuff, now do the rest of housekeeping */ | 
|  | /* had we spliced it onto indirect block? */ | 
|  | if (where->bh) { | 
|  | /* | 
|  | * If we spliced it onto an indirect block, we haven't | 
|  | * altered the inode.  Note however that if it is being spliced | 
|  | * onto an indirect block at the very end of the file (the | 
|  | * file is growing) then we *will* alter the inode to reflect | 
|  | * the new i_size.  But that is not done here - it is done in | 
|  | * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. | 
|  | */ | 
|  | jbd_debug(5, "splicing indirect only\n"); | 
|  | BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); | 
|  | err = ext4_handle_dirty_metadata(handle, inode, where->bh); | 
|  | if (err) | 
|  | goto err_out; | 
|  | } else { | 
|  | /* | 
|  | * OK, we spliced it into the inode itself on a direct block. | 
|  | */ | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | jbd_debug(5, "splicing direct\n"); | 
|  | } | 
|  | return err; | 
|  |  | 
|  | err_out: | 
|  | for (i = 1; i <= num; i++) { | 
|  | /* | 
|  | * branch[i].bh is newly allocated, so there is no | 
|  | * need to revoke the block, which is why we don't | 
|  | * need to set EXT4_FREE_BLOCKS_METADATA. | 
|  | */ | 
|  | ext4_free_blocks(handle, inode, where[i].bh, 0, 1, | 
|  | EXT4_FREE_BLOCKS_FORGET); | 
|  | } | 
|  | ext4_free_blocks(handle, inode, NULL, le32_to_cpu(where[num].key), | 
|  | blks, 0); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The ext4_ind_map_blocks() function handles non-extents inodes | 
|  | * (i.e., using the traditional indirect/double-indirect i_blocks | 
|  | * scheme) for ext4_map_blocks(). | 
|  | * | 
|  | * Allocation strategy is simple: if we have to allocate something, we will | 
|  | * have to go the whole way to leaf. So let's do it before attaching anything | 
|  | * to tree, set linkage between the newborn blocks, write them if sync is | 
|  | * required, recheck the path, free and repeat if check fails, otherwise | 
|  | * set the last missing link (that will protect us from any truncate-generated | 
|  | * removals - all blocks on the path are immune now) and possibly force the | 
|  | * write on the parent block. | 
|  | * That has a nice additional property: no special recovery from the failed | 
|  | * allocations is needed - we simply release blocks and do not touch anything | 
|  | * reachable from inode. | 
|  | * | 
|  | * `handle' can be NULL if create == 0. | 
|  | * | 
|  | * return > 0, # of blocks mapped or allocated. | 
|  | * return = 0, if plain lookup failed. | 
|  | * return < 0, error case. | 
|  | * | 
|  | * The ext4_ind_get_blocks() function should be called with | 
|  | * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem | 
|  | * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or | 
|  | * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system | 
|  | * blocks. | 
|  | */ | 
|  | int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, | 
|  | struct ext4_map_blocks *map, | 
|  | int flags) | 
|  | { | 
|  | int err = -EIO; | 
|  | ext4_lblk_t offsets[4]; | 
|  | Indirect chain[4]; | 
|  | Indirect *partial; | 
|  | ext4_fsblk_t goal; | 
|  | int indirect_blks; | 
|  | int blocks_to_boundary = 0; | 
|  | int depth; | 
|  | int count = 0; | 
|  | ext4_fsblk_t first_block = 0; | 
|  |  | 
|  | trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags); | 
|  | J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))); | 
|  | J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); | 
|  | depth = ext4_block_to_path(inode, map->m_lblk, offsets, | 
|  | &blocks_to_boundary); | 
|  |  | 
|  | if (depth == 0) | 
|  | goto out; | 
|  |  | 
|  | partial = ext4_get_branch(inode, depth, offsets, chain, &err); | 
|  |  | 
|  | /* Simplest case - block found, no allocation needed */ | 
|  | if (!partial) { | 
|  | first_block = le32_to_cpu(chain[depth - 1].key); | 
|  | count++; | 
|  | /*map more blocks*/ | 
|  | while (count < map->m_len && count <= blocks_to_boundary) { | 
|  | ext4_fsblk_t blk; | 
|  |  | 
|  | blk = le32_to_cpu(*(chain[depth-1].p + count)); | 
|  |  | 
|  | if (blk == first_block + count) | 
|  | count++; | 
|  | else | 
|  | break; | 
|  | } | 
|  | goto got_it; | 
|  | } | 
|  |  | 
|  | /* Next simple case - plain lookup or failed read of indirect block */ | 
|  | if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) | 
|  | goto cleanup; | 
|  |  | 
|  | /* | 
|  | * Okay, we need to do block allocation. | 
|  | */ | 
|  | if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb, | 
|  | EXT4_FEATURE_RO_COMPAT_BIGALLOC)) { | 
|  | EXT4_ERROR_INODE(inode, "Can't allocate blocks for " | 
|  | "non-extent mapped inodes with bigalloc"); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | goal = ext4_find_goal(inode, map->m_lblk, partial); | 
|  |  | 
|  | /* the number of blocks need to allocate for [d,t]indirect blocks */ | 
|  | indirect_blks = (chain + depth) - partial - 1; | 
|  |  | 
|  | /* | 
|  | * Next look up the indirect map to count the totoal number of | 
|  | * direct blocks to allocate for this branch. | 
|  | */ | 
|  | count = ext4_blks_to_allocate(partial, indirect_blks, | 
|  | map->m_len, blocks_to_boundary); | 
|  | /* | 
|  | * Block out ext4_truncate while we alter the tree | 
|  | */ | 
|  | err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks, | 
|  | &count, goal, | 
|  | offsets + (partial - chain), partial); | 
|  |  | 
|  | /* | 
|  | * The ext4_splice_branch call will free and forget any buffers | 
|  | * on the new chain if there is a failure, but that risks using | 
|  | * up transaction credits, especially for bitmaps where the | 
|  | * credits cannot be returned.  Can we handle this somehow?  We | 
|  | * may need to return -EAGAIN upwards in the worst case.  --sct | 
|  | */ | 
|  | if (!err) | 
|  | err = ext4_splice_branch(handle, inode, map->m_lblk, | 
|  | partial, indirect_blks, count); | 
|  | if (err) | 
|  | goto cleanup; | 
|  |  | 
|  | map->m_flags |= EXT4_MAP_NEW; | 
|  |  | 
|  | ext4_update_inode_fsync_trans(handle, inode, 1); | 
|  | got_it: | 
|  | map->m_flags |= EXT4_MAP_MAPPED; | 
|  | map->m_pblk = le32_to_cpu(chain[depth-1].key); | 
|  | map->m_len = count; | 
|  | if (count > blocks_to_boundary) | 
|  | map->m_flags |= EXT4_MAP_BOUNDARY; | 
|  | err = count; | 
|  | /* Clean up and exit */ | 
|  | partial = chain + depth - 1;	/* the whole chain */ | 
|  | cleanup: | 
|  | while (partial > chain) { | 
|  | BUFFER_TRACE(partial->bh, "call brelse"); | 
|  | brelse(partial->bh); | 
|  | partial--; | 
|  | } | 
|  | out: | 
|  | trace_ext4_ind_map_blocks_exit(inode, map, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * O_DIRECT for ext3 (or indirect map) based files | 
|  | * | 
|  | * If the O_DIRECT write will extend the file then add this inode to the | 
|  | * orphan list.  So recovery will truncate it back to the original size | 
|  | * if the machine crashes during the write. | 
|  | * | 
|  | * If the O_DIRECT write is intantiating holes inside i_size and the machine | 
|  | * crashes then stale disk data _may_ be exposed inside the file. But current | 
|  | * VFS code falls back into buffered path in that case so we are safe. | 
|  | */ | 
|  | ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, | 
|  | const struct iovec *iov, loff_t offset, | 
|  | unsigned long nr_segs) | 
|  | { | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file->f_mapping->host; | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | handle_t *handle; | 
|  | ssize_t ret; | 
|  | int orphan = 0; | 
|  | size_t count = iov_length(iov, nr_segs); | 
|  | int retries = 0; | 
|  |  | 
|  | if (rw == WRITE) { | 
|  | loff_t final_size = offset + count; | 
|  |  | 
|  | if (final_size > inode->i_size) { | 
|  | /* Credits for sb + inode write */ | 
|  | handle = ext4_journal_start(inode, EXT4_HT_INODE, 2); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  | ret = ext4_orphan_add(handle, inode); | 
|  | if (ret) { | 
|  | ext4_journal_stop(handle); | 
|  | goto out; | 
|  | } | 
|  | orphan = 1; | 
|  | ei->i_disksize = inode->i_size; | 
|  | ext4_journal_stop(handle); | 
|  | } | 
|  | } | 
|  |  | 
|  | retry: | 
|  | if (rw == READ && ext4_should_dioread_nolock(inode)) { | 
|  | if (unlikely(atomic_read(&EXT4_I(inode)->i_unwritten))) { | 
|  | mutex_lock(&inode->i_mutex); | 
|  | ext4_flush_unwritten_io(inode); | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | } | 
|  | /* | 
|  | * Nolock dioread optimization may be dynamically disabled | 
|  | * via ext4_inode_block_unlocked_dio(). Check inode's state | 
|  | * while holding extra i_dio_count ref. | 
|  | */ | 
|  | atomic_inc(&inode->i_dio_count); | 
|  | smp_mb(); | 
|  | if (unlikely(ext4_test_inode_state(inode, | 
|  | EXT4_STATE_DIOREAD_LOCK))) { | 
|  | inode_dio_done(inode); | 
|  | goto locked; | 
|  | } | 
|  | ret = __blockdev_direct_IO(rw, iocb, inode, | 
|  | inode->i_sb->s_bdev, iov, | 
|  | offset, nr_segs, | 
|  | ext4_get_block, NULL, NULL, 0); | 
|  | inode_dio_done(inode); | 
|  | } else { | 
|  | locked: | 
|  | ret = blockdev_direct_IO(rw, iocb, inode, iov, | 
|  | offset, nr_segs, ext4_get_block); | 
|  |  | 
|  | if (unlikely((rw & WRITE) && ret < 0)) { | 
|  | loff_t isize = i_size_read(inode); | 
|  | loff_t end = offset + iov_length(iov, nr_segs); | 
|  |  | 
|  | if (end > isize) | 
|  | ext4_truncate_failed_write(inode); | 
|  | } | 
|  | } | 
|  | if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | 
|  | goto retry; | 
|  |  | 
|  | if (orphan) { | 
|  | int err; | 
|  |  | 
|  | /* Credits for sb + inode write */ | 
|  | handle = ext4_journal_start(inode, EXT4_HT_INODE, 2); | 
|  | if (IS_ERR(handle)) { | 
|  | /* This is really bad luck. We've written the data | 
|  | * but cannot extend i_size. Bail out and pretend | 
|  | * the write failed... */ | 
|  | ret = PTR_ERR(handle); | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  |  | 
|  | goto out; | 
|  | } | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(handle, inode); | 
|  | if (ret > 0) { | 
|  | loff_t end = offset + ret; | 
|  | if (end > inode->i_size) { | 
|  | ei->i_disksize = end; | 
|  | i_size_write(inode, end); | 
|  | /* | 
|  | * We're going to return a positive `ret' | 
|  | * here due to non-zero-length I/O, so there's | 
|  | * no way of reporting error returns from | 
|  | * ext4_mark_inode_dirty() to userspace.  So | 
|  | * ignore it. | 
|  | */ | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | } | 
|  | } | 
|  | err = ext4_journal_stop(handle); | 
|  | if (ret == 0) | 
|  | ret = err; | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calculate the number of metadata blocks need to reserve | 
|  | * to allocate a new block at @lblocks for non extent file based file | 
|  | */ | 
|  | int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock) | 
|  | { | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1); | 
|  | int blk_bits; | 
|  |  | 
|  | if (lblock < EXT4_NDIR_BLOCKS) | 
|  | return 0; | 
|  |  | 
|  | lblock -= EXT4_NDIR_BLOCKS; | 
|  |  | 
|  | if (ei->i_da_metadata_calc_len && | 
|  | (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) { | 
|  | ei->i_da_metadata_calc_len++; | 
|  | return 0; | 
|  | } | 
|  | ei->i_da_metadata_calc_last_lblock = lblock & dind_mask; | 
|  | ei->i_da_metadata_calc_len = 1; | 
|  | blk_bits = order_base_2(lblock); | 
|  | return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1; | 
|  | } | 
|  |  | 
|  | int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk) | 
|  | { | 
|  | int indirects; | 
|  |  | 
|  | /* if nrblocks are contiguous */ | 
|  | if (chunk) { | 
|  | /* | 
|  | * With N contiguous data blocks, we need at most | 
|  | * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks, | 
|  | * 2 dindirect blocks, and 1 tindirect block | 
|  | */ | 
|  | return DIV_ROUND_UP(nrblocks, | 
|  | EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4; | 
|  | } | 
|  | /* | 
|  | * if nrblocks are not contiguous, worse case, each block touch | 
|  | * a indirect block, and each indirect block touch a double indirect | 
|  | * block, plus a triple indirect block | 
|  | */ | 
|  | indirects = nrblocks * 2 + 1; | 
|  | return indirects; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Truncate transactions can be complex and absolutely huge.  So we need to | 
|  | * be able to restart the transaction at a conventient checkpoint to make | 
|  | * sure we don't overflow the journal. | 
|  | * | 
|  | * Try to extend this transaction for the purposes of truncation.  If | 
|  | * extend fails, we need to propagate the failure up and restart the | 
|  | * transaction in the top-level truncate loop. --sct | 
|  | * | 
|  | * Returns 0 if we managed to create more room.  If we can't create more | 
|  | * room, and the transaction must be restarted we return 1. | 
|  | */ | 
|  | static int try_to_extend_transaction(handle_t *handle, struct inode *inode) | 
|  | { | 
|  | if (!ext4_handle_valid(handle)) | 
|  | return 0; | 
|  | if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) | 
|  | return 0; | 
|  | if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode))) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Probably it should be a library function... search for first non-zero word | 
|  | * or memcmp with zero_page, whatever is better for particular architecture. | 
|  | * Linus? | 
|  | */ | 
|  | static inline int all_zeroes(__le32 *p, __le32 *q) | 
|  | { | 
|  | while (p < q) | 
|  | if (*p++) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_find_shared - find the indirect blocks for partial truncation. | 
|  | *	@inode:	  inode in question | 
|  | *	@depth:	  depth of the affected branch | 
|  | *	@offsets: offsets of pointers in that branch (see ext4_block_to_path) | 
|  | *	@chain:	  place to store the pointers to partial indirect blocks | 
|  | *	@top:	  place to the (detached) top of branch | 
|  | * | 
|  | *	This is a helper function used by ext4_truncate(). | 
|  | * | 
|  | *	When we do truncate() we may have to clean the ends of several | 
|  | *	indirect blocks but leave the blocks themselves alive. Block is | 
|  | *	partially truncated if some data below the new i_size is referred | 
|  | *	from it (and it is on the path to the first completely truncated | 
|  | *	data block, indeed).  We have to free the top of that path along | 
|  | *	with everything to the right of the path. Since no allocation | 
|  | *	past the truncation point is possible until ext4_truncate() | 
|  | *	finishes, we may safely do the latter, but top of branch may | 
|  | *	require special attention - pageout below the truncation point | 
|  | *	might try to populate it. | 
|  | * | 
|  | *	We atomically detach the top of branch from the tree, store the | 
|  | *	block number of its root in *@top, pointers to buffer_heads of | 
|  | *	partially truncated blocks - in @chain[].bh and pointers to | 
|  | *	their last elements that should not be removed - in | 
|  | *	@chain[].p. Return value is the pointer to last filled element | 
|  | *	of @chain. | 
|  | * | 
|  | *	The work left to caller to do the actual freeing of subtrees: | 
|  | *		a) free the subtree starting from *@top | 
|  | *		b) free the subtrees whose roots are stored in | 
|  | *			(@chain[i].p+1 .. end of @chain[i].bh->b_data) | 
|  | *		c) free the subtrees growing from the inode past the @chain[0]. | 
|  | *			(no partially truncated stuff there).  */ | 
|  |  | 
|  | static Indirect *ext4_find_shared(struct inode *inode, int depth, | 
|  | ext4_lblk_t offsets[4], Indirect chain[4], | 
|  | __le32 *top) | 
|  | { | 
|  | Indirect *partial, *p; | 
|  | int k, err; | 
|  |  | 
|  | *top = 0; | 
|  | /* Make k index the deepest non-null offset + 1 */ | 
|  | for (k = depth; k > 1 && !offsets[k-1]; k--) | 
|  | ; | 
|  | partial = ext4_get_branch(inode, k, offsets, chain, &err); | 
|  | /* Writer: pointers */ | 
|  | if (!partial) | 
|  | partial = chain + k-1; | 
|  | /* | 
|  | * If the branch acquired continuation since we've looked at it - | 
|  | * fine, it should all survive and (new) top doesn't belong to us. | 
|  | */ | 
|  | if (!partial->key && *partial->p) | 
|  | /* Writer: end */ | 
|  | goto no_top; | 
|  | for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) | 
|  | ; | 
|  | /* | 
|  | * OK, we've found the last block that must survive. The rest of our | 
|  | * branch should be detached before unlocking. However, if that rest | 
|  | * of branch is all ours and does not grow immediately from the inode | 
|  | * it's easier to cheat and just decrement partial->p. | 
|  | */ | 
|  | if (p == chain + k - 1 && p > chain) { | 
|  | p->p--; | 
|  | } else { | 
|  | *top = *p->p; | 
|  | /* Nope, don't do this in ext4.  Must leave the tree intact */ | 
|  | #if 0 | 
|  | *p->p = 0; | 
|  | #endif | 
|  | } | 
|  | /* Writer: end */ | 
|  |  | 
|  | while (partial > p) { | 
|  | brelse(partial->bh); | 
|  | partial--; | 
|  | } | 
|  | no_top: | 
|  | return partial; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Zero a number of block pointers in either an inode or an indirect block. | 
|  | * If we restart the transaction we must again get write access to the | 
|  | * indirect block for further modification. | 
|  | * | 
|  | * We release `count' blocks on disk, but (last - first) may be greater | 
|  | * than `count' because there can be holes in there. | 
|  | * | 
|  | * Return 0 on success, 1 on invalid block range | 
|  | * and < 0 on fatal error. | 
|  | */ | 
|  | static int ext4_clear_blocks(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *bh, | 
|  | ext4_fsblk_t block_to_free, | 
|  | unsigned long count, __le32 *first, | 
|  | __le32 *last) | 
|  | { | 
|  | __le32 *p; | 
|  | int	flags = EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_VALIDATED; | 
|  | int	err; | 
|  |  | 
|  | if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) | 
|  | flags |= EXT4_FREE_BLOCKS_METADATA; | 
|  |  | 
|  | if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free, | 
|  | count)) { | 
|  | EXT4_ERROR_INODE(inode, "attempt to clear invalid " | 
|  | "blocks %llu len %lu", | 
|  | (unsigned long long) block_to_free, count); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (try_to_extend_transaction(handle, inode)) { | 
|  | if (bh) { | 
|  | BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
|  | err = ext4_handle_dirty_metadata(handle, inode, bh); | 
|  | if (unlikely(err)) | 
|  | goto out_err; | 
|  | } | 
|  | err = ext4_mark_inode_dirty(handle, inode); | 
|  | if (unlikely(err)) | 
|  | goto out_err; | 
|  | err = ext4_truncate_restart_trans(handle, inode, | 
|  | ext4_blocks_for_truncate(inode)); | 
|  | if (unlikely(err)) | 
|  | goto out_err; | 
|  | if (bh) { | 
|  | BUFFER_TRACE(bh, "retaking write access"); | 
|  | err = ext4_journal_get_write_access(handle, bh); | 
|  | if (unlikely(err)) | 
|  | goto out_err; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (p = first; p < last; p++) | 
|  | *p = 0; | 
|  |  | 
|  | ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags); | 
|  | return 0; | 
|  | out_err: | 
|  | ext4_std_error(inode->i_sb, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ext4_free_data - free a list of data blocks | 
|  | * @handle:	handle for this transaction | 
|  | * @inode:	inode we are dealing with | 
|  | * @this_bh:	indirect buffer_head which contains *@first and *@last | 
|  | * @first:	array of block numbers | 
|  | * @last:	points immediately past the end of array | 
|  | * | 
|  | * We are freeing all blocks referred from that array (numbers are stored as | 
|  | * little-endian 32-bit) and updating @inode->i_blocks appropriately. | 
|  | * | 
|  | * We accumulate contiguous runs of blocks to free.  Conveniently, if these | 
|  | * blocks are contiguous then releasing them at one time will only affect one | 
|  | * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't | 
|  | * actually use a lot of journal space. | 
|  | * | 
|  | * @this_bh will be %NULL if @first and @last point into the inode's direct | 
|  | * block pointers. | 
|  | */ | 
|  | static void ext4_free_data(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *this_bh, | 
|  | __le32 *first, __le32 *last) | 
|  | { | 
|  | ext4_fsblk_t block_to_free = 0;    /* Starting block # of a run */ | 
|  | unsigned long count = 0;	    /* Number of blocks in the run */ | 
|  | __le32 *block_to_free_p = NULL;	    /* Pointer into inode/ind | 
|  | corresponding to | 
|  | block_to_free */ | 
|  | ext4_fsblk_t nr;		    /* Current block # */ | 
|  | __le32 *p;			    /* Pointer into inode/ind | 
|  | for current block */ | 
|  | int err = 0; | 
|  |  | 
|  | if (this_bh) {				/* For indirect block */ | 
|  | BUFFER_TRACE(this_bh, "get_write_access"); | 
|  | err = ext4_journal_get_write_access(handle, this_bh); | 
|  | /* Important: if we can't update the indirect pointers | 
|  | * to the blocks, we can't free them. */ | 
|  | if (err) | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (p = first; p < last; p++) { | 
|  | nr = le32_to_cpu(*p); | 
|  | if (nr) { | 
|  | /* accumulate blocks to free if they're contiguous */ | 
|  | if (count == 0) { | 
|  | block_to_free = nr; | 
|  | block_to_free_p = p; | 
|  | count = 1; | 
|  | } else if (nr == block_to_free + count) { | 
|  | count++; | 
|  | } else { | 
|  | err = ext4_clear_blocks(handle, inode, this_bh, | 
|  | block_to_free, count, | 
|  | block_to_free_p, p); | 
|  | if (err) | 
|  | break; | 
|  | block_to_free = nr; | 
|  | block_to_free_p = p; | 
|  | count = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!err && count > 0) | 
|  | err = ext4_clear_blocks(handle, inode, this_bh, block_to_free, | 
|  | count, block_to_free_p, p); | 
|  | if (err < 0) | 
|  | /* fatal error */ | 
|  | return; | 
|  |  | 
|  | if (this_bh) { | 
|  | BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); | 
|  |  | 
|  | /* | 
|  | * The buffer head should have an attached journal head at this | 
|  | * point. However, if the data is corrupted and an indirect | 
|  | * block pointed to itself, it would have been detached when | 
|  | * the block was cleared. Check for this instead of OOPSing. | 
|  | */ | 
|  | if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) | 
|  | ext4_handle_dirty_metadata(handle, inode, this_bh); | 
|  | else | 
|  | EXT4_ERROR_INODE(inode, | 
|  | "circular indirect block detected at " | 
|  | "block %llu", | 
|  | (unsigned long long) this_bh->b_blocknr); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_free_branches - free an array of branches | 
|  | *	@handle: JBD handle for this transaction | 
|  | *	@inode:	inode we are dealing with | 
|  | *	@parent_bh: the buffer_head which contains *@first and *@last | 
|  | *	@first:	array of block numbers | 
|  | *	@last:	pointer immediately past the end of array | 
|  | *	@depth:	depth of the branches to free | 
|  | * | 
|  | *	We are freeing all blocks referred from these branches (numbers are | 
|  | *	stored as little-endian 32-bit) and updating @inode->i_blocks | 
|  | *	appropriately. | 
|  | */ | 
|  | static void ext4_free_branches(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *parent_bh, | 
|  | __le32 *first, __le32 *last, int depth) | 
|  | { | 
|  | ext4_fsblk_t nr; | 
|  | __le32 *p; | 
|  |  | 
|  | if (ext4_handle_is_aborted(handle)) | 
|  | return; | 
|  |  | 
|  | if (depth--) { | 
|  | struct buffer_head *bh; | 
|  | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | p = last; | 
|  | while (--p >= first) { | 
|  | nr = le32_to_cpu(*p); | 
|  | if (!nr) | 
|  | continue;		/* A hole */ | 
|  |  | 
|  | if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), | 
|  | nr, 1)) { | 
|  | EXT4_ERROR_INODE(inode, | 
|  | "invalid indirect mapped " | 
|  | "block %lu (level %d)", | 
|  | (unsigned long) nr, depth); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Go read the buffer for the next level down */ | 
|  | bh = sb_bread(inode->i_sb, nr); | 
|  |  | 
|  | /* | 
|  | * A read failure? Report error and clear slot | 
|  | * (should be rare). | 
|  | */ | 
|  | if (!bh) { | 
|  | EXT4_ERROR_INODE_BLOCK(inode, nr, | 
|  | "Read failure"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* This zaps the entire block.  Bottom up. */ | 
|  | BUFFER_TRACE(bh, "free child branches"); | 
|  | ext4_free_branches(handle, inode, bh, | 
|  | (__le32 *) bh->b_data, | 
|  | (__le32 *) bh->b_data + addr_per_block, | 
|  | depth); | 
|  | brelse(bh); | 
|  |  | 
|  | /* | 
|  | * Everything below this this pointer has been | 
|  | * released.  Now let this top-of-subtree go. | 
|  | * | 
|  | * We want the freeing of this indirect block to be | 
|  | * atomic in the journal with the updating of the | 
|  | * bitmap block which owns it.  So make some room in | 
|  | * the journal. | 
|  | * | 
|  | * We zero the parent pointer *after* freeing its | 
|  | * pointee in the bitmaps, so if extend_transaction() | 
|  | * for some reason fails to put the bitmap changes and | 
|  | * the release into the same transaction, recovery | 
|  | * will merely complain about releasing a free block, | 
|  | * rather than leaking blocks. | 
|  | */ | 
|  | if (ext4_handle_is_aborted(handle)) | 
|  | return; | 
|  | if (try_to_extend_transaction(handle, inode)) { | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | ext4_truncate_restart_trans(handle, inode, | 
|  | ext4_blocks_for_truncate(inode)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The forget flag here is critical because if | 
|  | * we are journaling (and not doing data | 
|  | * journaling), we have to make sure a revoke | 
|  | * record is written to prevent the journal | 
|  | * replay from overwriting the (former) | 
|  | * indirect block if it gets reallocated as a | 
|  | * data block.  This must happen in the same | 
|  | * transaction where the data blocks are | 
|  | * actually freed. | 
|  | */ | 
|  | ext4_free_blocks(handle, inode, NULL, nr, 1, | 
|  | EXT4_FREE_BLOCKS_METADATA| | 
|  | EXT4_FREE_BLOCKS_FORGET); | 
|  |  | 
|  | if (parent_bh) { | 
|  | /* | 
|  | * The block which we have just freed is | 
|  | * pointed to by an indirect block: journal it | 
|  | */ | 
|  | BUFFER_TRACE(parent_bh, "get_write_access"); | 
|  | if (!ext4_journal_get_write_access(handle, | 
|  | parent_bh)){ | 
|  | *p = 0; | 
|  | BUFFER_TRACE(parent_bh, | 
|  | "call ext4_handle_dirty_metadata"); | 
|  | ext4_handle_dirty_metadata(handle, | 
|  | inode, | 
|  | parent_bh); | 
|  | } | 
|  | } | 
|  | } | 
|  | } else { | 
|  | /* We have reached the bottom of the tree. */ | 
|  | BUFFER_TRACE(parent_bh, "free data blocks"); | 
|  | ext4_free_data(handle, inode, parent_bh, first, last); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ext4_ind_truncate(handle_t *handle, struct inode *inode) | 
|  | { | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | __le32 *i_data = ei->i_data; | 
|  | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | ext4_lblk_t offsets[4]; | 
|  | Indirect chain[4]; | 
|  | Indirect *partial; | 
|  | __le32 nr = 0; | 
|  | int n = 0; | 
|  | ext4_lblk_t last_block, max_block; | 
|  | unsigned blocksize = inode->i_sb->s_blocksize; | 
|  |  | 
|  | last_block = (inode->i_size + blocksize-1) | 
|  | >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
|  | max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) | 
|  | >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
|  |  | 
|  | if (last_block != max_block) { | 
|  | n = ext4_block_to_path(inode, last_block, offsets, NULL); | 
|  | if (n == 0) | 
|  | return; | 
|  | } | 
|  |  | 
|  | ext4_es_remove_extent(inode, last_block, EXT_MAX_BLOCKS - last_block); | 
|  |  | 
|  | /* | 
|  | * The orphan list entry will now protect us from any crash which | 
|  | * occurs before the truncate completes, so it is now safe to propagate | 
|  | * the new, shorter inode size (held for now in i_size) into the | 
|  | * on-disk inode. We do this via i_disksize, which is the value which | 
|  | * ext4 *really* writes onto the disk inode. | 
|  | */ | 
|  | ei->i_disksize = inode->i_size; | 
|  |  | 
|  | if (last_block == max_block) { | 
|  | /* | 
|  | * It is unnecessary to free any data blocks if last_block is | 
|  | * equal to the indirect block limit. | 
|  | */ | 
|  | return; | 
|  | } else if (n == 1) {		/* direct blocks */ | 
|  | ext4_free_data(handle, inode, NULL, i_data+offsets[0], | 
|  | i_data + EXT4_NDIR_BLOCKS); | 
|  | goto do_indirects; | 
|  | } | 
|  |  | 
|  | partial = ext4_find_shared(inode, n, offsets, chain, &nr); | 
|  | /* Kill the top of shared branch (not detached) */ | 
|  | if (nr) { | 
|  | if (partial == chain) { | 
|  | /* Shared branch grows from the inode */ | 
|  | ext4_free_branches(handle, inode, NULL, | 
|  | &nr, &nr+1, (chain+n-1) - partial); | 
|  | *partial->p = 0; | 
|  | /* | 
|  | * We mark the inode dirty prior to restart, | 
|  | * and prior to stop.  No need for it here. | 
|  | */ | 
|  | } else { | 
|  | /* Shared branch grows from an indirect block */ | 
|  | BUFFER_TRACE(partial->bh, "get_write_access"); | 
|  | ext4_free_branches(handle, inode, partial->bh, | 
|  | partial->p, | 
|  | partial->p+1, (chain+n-1) - partial); | 
|  | } | 
|  | } | 
|  | /* Clear the ends of indirect blocks on the shared branch */ | 
|  | while (partial > chain) { | 
|  | ext4_free_branches(handle, inode, partial->bh, partial->p + 1, | 
|  | (__le32*)partial->bh->b_data+addr_per_block, | 
|  | (chain+n-1) - partial); | 
|  | BUFFER_TRACE(partial->bh, "call brelse"); | 
|  | brelse(partial->bh); | 
|  | partial--; | 
|  | } | 
|  | do_indirects: | 
|  | /* Kill the remaining (whole) subtrees */ | 
|  | switch (offsets[0]) { | 
|  | default: | 
|  | nr = i_data[EXT4_IND_BLOCK]; | 
|  | if (nr) { | 
|  | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); | 
|  | i_data[EXT4_IND_BLOCK] = 0; | 
|  | } | 
|  | case EXT4_IND_BLOCK: | 
|  | nr = i_data[EXT4_DIND_BLOCK]; | 
|  | if (nr) { | 
|  | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); | 
|  | i_data[EXT4_DIND_BLOCK] = 0; | 
|  | } | 
|  | case EXT4_DIND_BLOCK: | 
|  | nr = i_data[EXT4_TIND_BLOCK]; | 
|  | if (nr) { | 
|  | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); | 
|  | i_data[EXT4_TIND_BLOCK] = 0; | 
|  | } | 
|  | case EXT4_TIND_BLOCK: | 
|  | ; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int free_hole_blocks(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *parent_bh, __le32 *i_data, | 
|  | int level, ext4_lblk_t first, | 
|  | ext4_lblk_t count, int max) | 
|  | { | 
|  | struct buffer_head *bh = NULL; | 
|  | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | int ret = 0; | 
|  | int i, inc; | 
|  | ext4_lblk_t offset; | 
|  | __le32 blk; | 
|  |  | 
|  | inc = 1 << ((EXT4_BLOCK_SIZE_BITS(inode->i_sb) - 2) * level); | 
|  | for (i = 0, offset = 0; i < max; i++, i_data++, offset += inc) { | 
|  | if (offset >= count + first) | 
|  | break; | 
|  | if (*i_data == 0 || (offset + inc) <= first) | 
|  | continue; | 
|  | blk = *i_data; | 
|  | if (level > 0) { | 
|  | ext4_lblk_t first2; | 
|  | bh = sb_bread(inode->i_sb, le32_to_cpu(blk)); | 
|  | if (!bh) { | 
|  | EXT4_ERROR_INODE_BLOCK(inode, le32_to_cpu(blk), | 
|  | "Read failure"); | 
|  | return -EIO; | 
|  | } | 
|  | first2 = (first > offset) ? first - offset : 0; | 
|  | ret = free_hole_blocks(handle, inode, bh, | 
|  | (__le32 *)bh->b_data, level - 1, | 
|  | first2, count - offset, | 
|  | inode->i_sb->s_blocksize >> 2); | 
|  | if (ret) { | 
|  | brelse(bh); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  | if (level == 0 || | 
|  | (bh && all_zeroes((__le32 *)bh->b_data, | 
|  | (__le32 *)bh->b_data + addr_per_block))) { | 
|  | ext4_free_data(handle, inode, parent_bh, &blk, &blk+1); | 
|  | *i_data = 0; | 
|  | } | 
|  | brelse(bh); | 
|  | bh = NULL; | 
|  | } | 
|  |  | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ext4_free_hole_blocks(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t first, ext4_lblk_t stop) | 
|  | { | 
|  | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | int level, ret = 0; | 
|  | int num = EXT4_NDIR_BLOCKS; | 
|  | ext4_lblk_t count, max = EXT4_NDIR_BLOCKS; | 
|  | __le32 *i_data = EXT4_I(inode)->i_data; | 
|  |  | 
|  | count = stop - first; | 
|  | for (level = 0; level < 4; level++, max *= addr_per_block) { | 
|  | if (first < max) { | 
|  | ret = free_hole_blocks(handle, inode, NULL, i_data, | 
|  | level, first, count, num); | 
|  | if (ret) | 
|  | goto err; | 
|  | if (count > max - first) | 
|  | count -= max - first; | 
|  | else | 
|  | break; | 
|  | first = 0; | 
|  | } else { | 
|  | first -= max; | 
|  | } | 
|  | i_data += num; | 
|  | if (level == 0) { | 
|  | num = 1; | 
|  | max = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  |