| /* | 
 |  * Support for HP iPAQ hx4700 PDAs. | 
 |  * | 
 |  * Copyright (c) 2008-2009 Philipp Zabel | 
 |  * | 
 |  * Based on code: | 
 |  *    Copyright (c) 2004 Hewlett-Packard Company. | 
 |  *    Copyright (c) 2005 SDG Systems, LLC | 
 |  *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/fb.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/gpio_keys.h> | 
 | #include <linux/input.h> | 
 | #include <linux/lcd.h> | 
 | #include <linux/mfd/htc-egpio.h> | 
 | #include <linux/mfd/asic3.h> | 
 | #include <linux/mtd/physmap.h> | 
 | #include <linux/pda_power.h> | 
 | #include <linux/pwm_backlight.h> | 
 | #include <linux/regulator/bq24022.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/spi/ads7846.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/usb/gpio_vbus.h> | 
 |  | 
 | #include <mach/hardware.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/mach/arch.h> | 
 |  | 
 | #include <mach/pxa27x.h> | 
 | #include <mach/hx4700.h> | 
 | #include <plat/i2c.h> | 
 | #include <mach/irda.h> | 
 | #include <mach/pxa2xx_spi.h> | 
 |  | 
 | #include <video/w100fb.h> | 
 |  | 
 | #include "devices.h" | 
 | #include "generic.h" | 
 |  | 
 | /* Physical address space information */ | 
 |  | 
 | #define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */ | 
 | #define ASIC3_PHYS      PXA_CS3_PHYS | 
 | #define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000) | 
 |  | 
 | static unsigned long hx4700_pin_config[] __initdata = { | 
 |  | 
 | 	/* SDRAM and Static Memory I/O Signals */ | 
 | 	GPIO20_nSDCS_2, | 
 | 	GPIO21_nSDCS_3, | 
 | 	GPIO15_nCS_1, | 
 | 	GPIO78_nCS_2,   /* W3220 */ | 
 | 	GPIO79_nCS_3,   /* ASIC3 */ | 
 | 	GPIO80_nCS_4, | 
 | 	GPIO33_nCS_5,	/* EGPIO, WLAN */ | 
 |  | 
 | 	/* PC CARD */ | 
 | 	GPIO48_nPOE, | 
 | 	GPIO49_nPWE, | 
 | 	GPIO50_nPIOR, | 
 | 	GPIO51_nPIOW, | 
 | 	GPIO54_nPCE_2, | 
 | 	GPIO55_nPREG, | 
 | 	GPIO56_nPWAIT, | 
 | 	GPIO57_nIOIS16, | 
 | 	GPIO85_nPCE_1, | 
 | 	GPIO104_PSKTSEL, | 
 |  | 
 | 	/* I2C */ | 
 | 	GPIO117_I2C_SCL, | 
 | 	GPIO118_I2C_SDA, | 
 |  | 
 | 	/* FFUART (RS-232) */ | 
 | 	GPIO34_FFUART_RXD, | 
 | 	GPIO35_FFUART_CTS, | 
 | 	GPIO36_FFUART_DCD, | 
 | 	GPIO37_FFUART_DSR, | 
 | 	GPIO38_FFUART_RI, | 
 | 	GPIO39_FFUART_TXD, | 
 | 	GPIO40_FFUART_DTR, | 
 | 	GPIO41_FFUART_RTS, | 
 |  | 
 | 	/* BTUART */ | 
 | 	GPIO42_BTUART_RXD, | 
 | 	GPIO43_BTUART_TXD, | 
 | 	GPIO44_BTUART_CTS, | 
 | 	GPIO45_BTUART_RTS, | 
 |  | 
 | 	/* PWM 1 (Backlight) */ | 
 | 	GPIO17_PWM1_OUT, | 
 |  | 
 | 	/* I2S */ | 
 | 	GPIO28_I2S_BITCLK_OUT, | 
 | 	GPIO29_I2S_SDATA_IN, | 
 | 	GPIO30_I2S_SDATA_OUT, | 
 | 	GPIO31_I2S_SYNC, | 
 | 	GPIO113_I2S_SYSCLK, | 
 |  | 
 | 	/* SSP 1 (NavPoint) */ | 
 | 	GPIO23_SSP1_SCLK, | 
 | 	GPIO24_SSP1_SFRM, | 
 | 	GPIO25_SSP1_TXD, | 
 | 	GPIO26_SSP1_RXD, | 
 |  | 
 | 	/* SSP 2 (TSC2046) */ | 
 | 	GPIO19_SSP2_SCLK, | 
 | 	GPIO86_SSP2_RXD, | 
 | 	GPIO87_SSP2_TXD, | 
 | 	GPIO88_GPIO, | 
 |  | 
 | 	/* HX4700 specific input GPIOs */ | 
 | 	GPIO12_GPIO,	/* ASIC3_IRQ */ | 
 | 	GPIO13_GPIO,	/* W3220_IRQ */ | 
 | 	GPIO14_GPIO,	/* nWLAN_IRQ */ | 
 |  | 
 | 	GPIO10_GPIO,	/* GSM_IRQ */ | 
 | 	GPIO13_GPIO,	/* CPLD_IRQ */ | 
 | 	GPIO107_GPIO,	/* DS1WM_IRQ */ | 
 | 	GPIO108_GPIO,	/* GSM_READY */ | 
 | 	GPIO58_GPIO,	/* TSC2046_nPENIRQ */ | 
 | 	GPIO66_GPIO,	/* nSDIO_IRQ */ | 
 | }; | 
 |  | 
 | #define HX4700_GPIO_IN(num, _desc) \ | 
 | 	{ .gpio = (num), .dir = 0, .desc = (_desc) } | 
 | #define HX4700_GPIO_OUT(num, _init, _desc) \ | 
 | 	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } | 
 | struct gpio_ress { | 
 | 	unsigned gpio : 8; | 
 | 	unsigned dir : 1; | 
 | 	unsigned init : 1; | 
 | 	char *desc; | 
 | }; | 
 |  | 
 | static int hx4700_gpio_request(struct gpio_ress *gpios, int size) | 
 | { | 
 | 	int i, rc = 0; | 
 | 	int gpio; | 
 | 	int dir; | 
 |  | 
 | 	for (i = 0; (!rc) && (i < size); i++) { | 
 | 		gpio = gpios[i].gpio; | 
 | 		dir = gpios[i].dir; | 
 | 		rc = gpio_request(gpio, gpios[i].desc); | 
 | 		if (rc) { | 
 | 			pr_err("Error requesting GPIO %d(%s) : %d\n", | 
 | 			       gpio, gpios[i].desc, rc); | 
 | 			continue; | 
 | 		} | 
 | 		if (dir) | 
 | 			gpio_direction_output(gpio, gpios[i].init); | 
 | 		else | 
 | 			gpio_direction_input(gpio); | 
 | 	} | 
 | 	while ((rc) && (--i >= 0)) | 
 | 		gpio_free(gpios[i].gpio); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* | 
 |  * IRDA | 
 |  */ | 
 |  | 
 | static void irda_transceiver_mode(struct device *dev, int mode) | 
 | { | 
 | 	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF); | 
 | } | 
 |  | 
 | static struct pxaficp_platform_data ficp_info = { | 
 | 	.transceiver_cap  = IR_SIRMODE | IR_OFF, | 
 | 	.transceiver_mode = irda_transceiver_mode, | 
 | }; | 
 |  | 
 | /* | 
 |  * GPIO Keys | 
 |  */ | 
 |  | 
 | #define INIT_KEY(_code, _gpio, _active_low, _desc)	\ | 
 | 	{						\ | 
 | 		.code       = KEY_##_code,		\ | 
 | 		.gpio       = _gpio,			\ | 
 | 		.active_low = _active_low,		\ | 
 | 		.desc       = _desc,			\ | 
 | 		.type       = EV_KEY,			\ | 
 | 		.wakeup     = 1,			\ | 
 | 	} | 
 |  | 
 | static struct gpio_keys_button gpio_keys_buttons[] = { | 
 | 	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"), | 
 | 	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"), | 
 | 	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"), | 
 | 	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"), | 
 | 	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"), | 
 | 	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"), | 
 | }; | 
 |  | 
 | static struct gpio_keys_platform_data gpio_keys_data = { | 
 | 	.buttons = gpio_keys_buttons, | 
 | 	.nbuttons = ARRAY_SIZE(gpio_keys_buttons), | 
 | }; | 
 |  | 
 | static struct platform_device gpio_keys = { | 
 | 	.name = "gpio-keys", | 
 | 	.dev  = { | 
 | 		.platform_data = &gpio_keys_data, | 
 | 	}, | 
 | 	.id   = -1, | 
 | }; | 
 |  | 
 | /* | 
 |  * ASIC3 | 
 |  */ | 
 |  | 
 | static u16 asic3_gpio_config[] = { | 
 | 	/* ASIC3 GPIO banks A and B along with some of C and D | 
 | 	   implement the buffering for the CF slot. */ | 
 | 	ASIC3_CONFIG_GPIO(0, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(1, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(2, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(3, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(4, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(5, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(6, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(7, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(8, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(9, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(10, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(11, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(12, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(13, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(14, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(15, 1, 1, 0), | 
 |  | 
 | 	ASIC3_CONFIG_GPIO(16, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(17, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(18, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(19, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(20, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(21, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(22, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(23, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(24, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(25, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(26, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(27, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(28, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(29, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(30, 1, 1, 0), | 
 | 	ASIC3_CONFIG_GPIO(31, 1, 1, 0), | 
 |  | 
 | 	/* GPIOC - CF, LEDs, SD */ | 
 | 	ASIC3_GPIOC0_LED0,		/* red */ | 
 | 	ASIC3_GPIOC1_LED1,		/* green */ | 
 | 	ASIC3_GPIOC2_LED2,		/* blue */ | 
 | 	ASIC3_GPIOC4_CF_nCD, | 
 | 	ASIC3_GPIOC5_nCIOW, | 
 | 	ASIC3_GPIOC6_nCIOR, | 
 | 	ASIC3_GPIOC7_nPCE_1, | 
 | 	ASIC3_GPIOC8_nPCE_2, | 
 | 	ASIC3_GPIOC9_nPOE, | 
 | 	ASIC3_GPIOC10_nPWE, | 
 | 	ASIC3_GPIOC11_PSKTSEL, | 
 | 	ASIC3_GPIOC12_nPREG, | 
 | 	ASIC3_GPIOC13_nPWAIT, | 
 | 	ASIC3_GPIOC14_nPIOIS16, | 
 | 	ASIC3_GPIOC15_nPIOR, | 
 |  | 
 | 	/* GPIOD: input GPIOs, CF */ | 
 | 	ASIC3_GPIOD11_nCIOIS16, | 
 | 	ASIC3_GPIOD12_nCWAIT, | 
 | 	ASIC3_GPIOD15_nPIOW, | 
 | }; | 
 |  | 
 | static struct resource asic3_resources[] = { | 
 | 	/* GPIO part */ | 
 | 	[0] = { | 
 | 		.start	= ASIC3_PHYS, | 
 | 		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), | 
 | 		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), | 
 | 		.flags	= IORESOURCE_IRQ, | 
 | 	}, | 
 | 	/* SD part */ | 
 | 	[2] = { | 
 | 		.start	= ASIC3_SD_PHYS, | 
 | 		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | 	[3] = { | 
 | 		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), | 
 | 		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), | 
 | 		.flags	= IORESOURCE_IRQ, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct asic3_platform_data asic3_platform_data = { | 
 | 	.gpio_config     = asic3_gpio_config, | 
 | 	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config), | 
 | 	.irq_base        = IRQ_BOARD_START, | 
 | 	.gpio_base       = HX4700_ASIC3_GPIO_BASE, | 
 | }; | 
 |  | 
 | static struct platform_device asic3 = { | 
 | 	.name          = "asic3", | 
 | 	.id            = -1, | 
 | 	.resource      = asic3_resources, | 
 | 	.num_resources = ARRAY_SIZE(asic3_resources), | 
 | 	.dev = { | 
 | 		.platform_data = &asic3_platform_data, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * EGPIO | 
 |  */ | 
 |  | 
 | static struct resource egpio_resources[] = { | 
 | 	[0] = { | 
 | 		.start = PXA_CS5_PHYS, | 
 | 		.end   = PXA_CS5_PHYS + 0x4 - 1, | 
 | 		.flags = IORESOURCE_MEM, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct htc_egpio_chip egpio_chips[] = { | 
 | 	[0] = { | 
 | 		.reg_start = 0, | 
 | 		.gpio_base = HX4700_EGPIO_BASE, | 
 | 		.num_gpios = 8, | 
 | 		.direction = HTC_EGPIO_OUTPUT, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct htc_egpio_platform_data egpio_info = { | 
 | 	.reg_width = 16, | 
 | 	.bus_width = 16, | 
 | 	.chip      = egpio_chips, | 
 | 	.num_chips = ARRAY_SIZE(egpio_chips), | 
 | }; | 
 |  | 
 | static struct platform_device egpio = { | 
 | 	.name          = "htc-egpio", | 
 | 	.id            = -1, | 
 | 	.resource      = egpio_resources, | 
 | 	.num_resources = ARRAY_SIZE(egpio_resources), | 
 | 	.dev = { | 
 | 		.platform_data = &egpio_info, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * LCD - Sony display connected to ATI Imageon w3220 | 
 |  */ | 
 |  | 
 | static int lcd_power; | 
 |  | 
 | static void sony_lcd_init(void) | 
 | { | 
 | 	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1); | 
 | 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); | 
 | 	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0); | 
 | 	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0); | 
 | 	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0); | 
 | 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); | 
 | 	mdelay(20); | 
 |  | 
 | 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1); | 
 | 	mdelay(5); | 
 | 	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1); | 
 |  | 
 | 	/* FIXME: init w3220 registers here */ | 
 |  | 
 | 	mdelay(5); | 
 | 	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1); | 
 | } | 
 |  | 
 | static void sony_lcd_off(void) | 
 | { | 
 | 	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0); | 
 | 	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); | 
 | } | 
 |  | 
 | static int hx4700_lcd_set_power(struct lcd_device *ldev, int level) | 
 | { | 
 | 	switch (level) { | 
 | 	case FB_BLANK_UNBLANK: | 
 | 		sony_lcd_init(); | 
 | 		break; | 
 | 	case FB_BLANK_NORMAL: | 
 | 	case FB_BLANK_VSYNC_SUSPEND: | 
 | 	case FB_BLANK_HSYNC_SUSPEND: | 
 | 	case FB_BLANK_POWERDOWN: | 
 | 		sony_lcd_off(); | 
 | 		break; | 
 | 	} | 
 | 	lcd_power = level; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int hx4700_lcd_get_power(struct lcd_device *lm) | 
 | { | 
 | 	return lcd_power; | 
 | } | 
 |  | 
 | static struct lcd_ops hx4700_lcd_ops = { | 
 | 	.get_power = hx4700_lcd_get_power, | 
 | 	.set_power = hx4700_lcd_set_power, | 
 | }; | 
 |  | 
 | static struct lcd_device *hx4700_lcd_device; | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static void w3220_lcd_suspend(struct w100fb_par *wfb) | 
 | { | 
 | 	sony_lcd_off(); | 
 | } | 
 |  | 
 | static void w3220_lcd_resume(struct w100fb_par *wfb) | 
 | { | 
 | 	sony_lcd_init(); | 
 | } | 
 | #else | 
 | #define w3220_lcd_resume	NULL | 
 | #define w3220_lcd_suspend	NULL | 
 | #endif | 
 |  | 
 | static struct w100_tg_info w3220_tg_info = { | 
 | 	.suspend	= w3220_lcd_suspend, | 
 | 	.resume		= w3220_lcd_resume, | 
 | }; | 
 |  | 
 | /*  				 W3220_VGA		QVGA */ | 
 | static struct w100_gen_regs w3220_regs = { | 
 | 	.lcd_format =        0x00000003, | 
 | 	.lcdd_cntl1 =        0x00000000, | 
 | 	.lcdd_cntl2 =        0x0003ffff, | 
 | 	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */ | 
 | 	.genlcd_cntl2 =      0x00000003, | 
 | 	.genlcd_cntl3 =      0x000102aa, | 
 | }; | 
 |  | 
 | static struct w100_mode w3220_modes[] = { | 
 | { | 
 | 	.xres 		= 480, | 
 | 	.yres 		= 640, | 
 | 	.left_margin 	= 15, | 
 | 	.right_margin 	= 16, | 
 | 	.upper_margin 	= 8, | 
 | 	.lower_margin 	= 7, | 
 | 	.crtc_ss	= 0x00000000, | 
 | 	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */ | 
 | 	.crtc_gs	= 0xc0000000,	/* 0x40000000 */ | 
 | 	.crtc_vpos_gs	= 0x0000028f, | 
 | 	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */ | 
 | 	.crtc_rev	= 0, | 
 | 	.crtc_dclk	= 0x80000000, | 
 | 	.crtc_gclk	= 0x040a0104, | 
 | 	.crtc_goe	= 0, | 
 | 	.pll_freq 	= 95, | 
 | 	.pixclk_divider = 4, | 
 | 	.pixclk_divider_rotated = 4, | 
 | 	.pixclk_src     = CLK_SRC_PLL, | 
 | 	.sysclk_divider = 0, | 
 | 	.sysclk_src     = CLK_SRC_PLL, | 
 | }, | 
 | { | 
 | 	.xres 		= 240, | 
 | 	.yres 		= 320, | 
 | 	.left_margin 	= 9, | 
 | 	.right_margin 	= 8, | 
 | 	.upper_margin 	= 5, | 
 | 	.lower_margin 	= 4, | 
 | 	.crtc_ss	= 0x80150014, | 
 | 	.crtc_ls        = 0xa0fb00f7, | 
 | 	.crtc_gs	= 0xc0080007, | 
 | 	.crtc_vpos_gs	= 0x00080007, | 
 | 	.crtc_rev	= 0x0000000a, | 
 | 	.crtc_dclk	= 0x81700030, | 
 | 	.crtc_gclk	= 0x8015010f, | 
 | 	.crtc_goe	= 0x00000000, | 
 | 	.pll_freq 	= 95, | 
 | 	.pixclk_divider = 4, | 
 | 	.pixclk_divider_rotated = 4, | 
 | 	.pixclk_src     = CLK_SRC_PLL, | 
 | 	.sysclk_divider = 0, | 
 | 	.sysclk_src     = CLK_SRC_PLL, | 
 | }, | 
 | }; | 
 |  | 
 | struct w100_mem_info w3220_mem_info = { | 
 | 	.ext_cntl        = 0x09640011, | 
 | 	.sdram_mode_reg  = 0x00600021, | 
 | 	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */ | 
 | 	.io_cntl         = 0x7ddd7333, | 
 | 	.size            = 0x1fffff, | 
 | }; | 
 |  | 
 | struct w100_bm_mem_info w3220_bm_mem_info = { | 
 | 	.ext_mem_bw = 0x50413e01, | 
 | 	.offset = 0, | 
 | 	.ext_timing_ctl = 0x00043f7f, | 
 | 	.ext_cntl = 0x00000010, | 
 | 	.mode_reg = 0x00250000, | 
 | 	.io_cntl = 0x0fff0000, | 
 | 	.config = 0x08301480, | 
 | }; | 
 |  | 
 | static struct w100_gpio_regs w3220_gpio_info = { | 
 | 	.init_data1 = 0xdfe00100,	/* GPIO_DATA */ | 
 | 	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */ | 
 | 	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */ | 
 | 	.init_data2 = 0x00000000,	/* GPIO_DATA2 */ | 
 | 	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */ | 
 | 	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */ | 
 | }; | 
 |  | 
 | static struct w100fb_mach_info w3220_info = { | 
 | 	.tg        = &w3220_tg_info, | 
 | 	.mem       = &w3220_mem_info, | 
 | 	.bm_mem    = &w3220_bm_mem_info, | 
 | 	.gpio      = &w3220_gpio_info, | 
 | 	.regs      = &w3220_regs, | 
 | 	.modelist  = w3220_modes, | 
 | 	.num_modes = 2, | 
 | 	.xtal_freq = 16000000, | 
 | }; | 
 |  | 
 | static struct resource w3220_resources[] = { | 
 | 	[0] = { | 
 | 		.start	= ATI_W3220_PHYS, | 
 | 		.end	= ATI_W3220_PHYS + 0x00ffffff, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct platform_device w3220 = { | 
 | 	.name	= "w100fb", | 
 | 	.id	= -1, | 
 | 	.dev	= { | 
 | 		.platform_data = &w3220_info, | 
 | 	}, | 
 | 	.num_resources = ARRAY_SIZE(w3220_resources), | 
 | 	.resource      = w3220_resources, | 
 | }; | 
 |  | 
 | /* | 
 |  * Backlight | 
 |  */ | 
 |  | 
 | static struct platform_pwm_backlight_data backlight_data = { | 
 | 	.pwm_id         = 1, | 
 | 	.max_brightness = 200, | 
 | 	.dft_brightness = 100, | 
 | 	.pwm_period_ns  = 30923, | 
 | }; | 
 |  | 
 | static struct platform_device backlight = { | 
 | 	.name = "pwm-backlight", | 
 | 	.id   = -1, | 
 | 	.dev  = { | 
 | 		.parent        = &pxa27x_device_pwm1.dev, | 
 | 		.platform_data = &backlight_data, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * USB "Transceiver" | 
 |  */ | 
 |  | 
 | static struct gpio_vbus_mach_info gpio_vbus_info = { | 
 | 	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN, | 
 | 	.gpio_vbus          = GPIOD14_nUSBC_DETECT, | 
 | 	.gpio_vbus_inverted = 1, | 
 | }; | 
 |  | 
 | static struct platform_device gpio_vbus = { | 
 | 	.name          = "gpio-vbus", | 
 | 	.id            = -1, | 
 | 	.dev = { | 
 | 		.platform_data = &gpio_vbus_info, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * Touchscreen - TSC2046 connected to SSP2 | 
 |  */ | 
 |  | 
 | static const struct ads7846_platform_data tsc2046_info = { | 
 | 	.model            = 7846, | 
 | 	.vref_delay_usecs = 100, | 
 | 	.pressure_max     = 512, | 
 | 	.debounce_max     = 10, | 
 | 	.debounce_tol     = 3, | 
 | 	.debounce_rep     = 1, | 
 | 	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ, | 
 | }; | 
 |  | 
 | static struct pxa2xx_spi_chip tsc2046_chip = { | 
 | 	.tx_threshold = 1, | 
 | 	.rx_threshold = 2, | 
 | 	.timeout      = 64, | 
 | 	.gpio_cs      = GPIO88_HX4700_TSC2046_CS, | 
 | }; | 
 |  | 
 | static struct spi_board_info tsc2046_board_info[] __initdata = { | 
 | 	{ | 
 | 		.modalias        = "ads7846", | 
 | 		.bus_num         = 2, | 
 | 		.max_speed_hz    = 2600000, /* 100 kHz sample rate */ | 
 | 		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ), | 
 | 		.platform_data   = &tsc2046_info, | 
 | 		.controller_data = &tsc2046_chip, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct pxa2xx_spi_master pxa_ssp2_master_info = { | 
 | 	.num_chipselect = 1, | 
 | 	.clock_enable   = CKEN_SSP2, | 
 | 	.enable_dma     = 1, | 
 | }; | 
 |  | 
 | /* | 
 |  * External power | 
 |  */ | 
 |  | 
 | static int power_supply_init(struct device *dev) | 
 | { | 
 | 	return gpio_request(GPIOD9_nAC_IN, "AC charger detect"); | 
 | } | 
 |  | 
 | static int hx4700_is_ac_online(void) | 
 | { | 
 | 	return !gpio_get_value(GPIOD9_nAC_IN); | 
 | } | 
 |  | 
 | static void power_supply_exit(struct device *dev) | 
 | { | 
 | 	gpio_free(GPIOD9_nAC_IN); | 
 | } | 
 |  | 
 | static char *hx4700_supplicants[] = { | 
 | 	"ds2760-battery.0", "backup-battery" | 
 | }; | 
 |  | 
 | static struct pda_power_pdata power_supply_info = { | 
 | 	.init            = power_supply_init, | 
 | 	.is_ac_online    = hx4700_is_ac_online, | 
 | 	.exit            = power_supply_exit, | 
 | 	.supplied_to     = hx4700_supplicants, | 
 | 	.num_supplicants = ARRAY_SIZE(hx4700_supplicants), | 
 | }; | 
 |  | 
 | static struct resource power_supply_resources[] = { | 
 | 	[0] = { | 
 | 		.name  = "ac", | 
 | 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | | 
 | 		         IORESOURCE_IRQ_LOWEDGE, | 
 | 		.start = gpio_to_irq(GPIOD9_nAC_IN), | 
 | 		.end   = gpio_to_irq(GPIOD9_nAC_IN), | 
 | 	}, | 
 | 	[1] = { | 
 | 		.name  = "usb", | 
 | 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | | 
 | 		         IORESOURCE_IRQ_LOWEDGE, | 
 | 		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT), | 
 | 		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT), | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct platform_device power_supply = { | 
 | 	.name = "pda-power", | 
 | 	.id   = -1, | 
 | 	.dev  = { | 
 | 		.platform_data = &power_supply_info, | 
 | 	}, | 
 | 	.resource      = power_supply_resources, | 
 | 	.num_resources = ARRAY_SIZE(power_supply_resources), | 
 | }; | 
 |  | 
 | /* | 
 |  * Battery charger | 
 |  */ | 
 |  | 
 | static struct regulator_consumer_supply bq24022_consumers[] = { | 
 | 	{ | 
 | 		.dev = &gpio_vbus.dev, | 
 | 		.supply = "vbus_draw", | 
 | 	}, | 
 | 	{ | 
 | 		.dev = &power_supply.dev, | 
 | 		.supply = "ac_draw", | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct regulator_init_data bq24022_init_data = { | 
 | 	.constraints = { | 
 | 		.max_uA         = 500000, | 
 | 		.valid_ops_mask = REGULATOR_CHANGE_CURRENT, | 
 | 	}, | 
 | 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers), | 
 | 	.consumer_supplies      = bq24022_consumers, | 
 | }; | 
 |  | 
 | static struct bq24022_mach_info bq24022_info = { | 
 | 	.gpio_nce   = GPIO72_HX4700_BQ24022_nCHARGE_EN, | 
 | 	.gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2, | 
 | 	.init_data  = &bq24022_init_data, | 
 | }; | 
 |  | 
 | static struct platform_device bq24022 = { | 
 | 	.name = "bq24022", | 
 | 	.id   = -1, | 
 | 	.dev  = { | 
 | 		.platform_data = &bq24022_info, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * StrataFlash | 
 |  */ | 
 |  | 
 | static void hx4700_set_vpp(struct map_info *map, int vpp) | 
 | { | 
 | 	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp); | 
 | } | 
 |  | 
 | static struct resource strataflash_resource = { | 
 | 	.start = PXA_CS0_PHYS, | 
 | 	.end   = PXA_CS0_PHYS + SZ_128M - 1, | 
 | 	.flags = IORESOURCE_MEM, | 
 | }; | 
 |  | 
 | static struct physmap_flash_data strataflash_data = { | 
 | 	.width = 4, | 
 | 	.set_vpp = hx4700_set_vpp, | 
 | }; | 
 |  | 
 | static struct platform_device strataflash = { | 
 | 	.name          = "physmap-flash", | 
 | 	.id            = -1, | 
 | 	.resource      = &strataflash_resource, | 
 | 	.num_resources = 1, | 
 | 	.dev = { | 
 | 		.platform_data = &strataflash_data, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * PCMCIA | 
 |  */ | 
 |  | 
 | static struct platform_device pcmcia = { | 
 | 	.name = "hx4700-pcmcia", | 
 | 	.dev  = { | 
 | 		.parent = &asic3.dev, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * Platform devices | 
 |  */ | 
 |  | 
 | static struct platform_device *devices[] __initdata = { | 
 | 	&asic3, | 
 | 	&gpio_keys, | 
 | 	&backlight, | 
 | 	&w3220, | 
 | 	&egpio, | 
 | 	&bq24022, | 
 | 	&gpio_vbus, | 
 | 	&power_supply, | 
 | 	&strataflash, | 
 | 	&pcmcia, | 
 | }; | 
 |  | 
 | static struct gpio_ress global_gpios[] = { | 
 | 	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"), | 
 | 	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"), | 
 | 	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"), | 
 | 	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"), | 
 | 	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"), | 
 | 	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"), | 
 | 	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"), | 
 | 	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"), | 
 | 	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"), | 
 | 	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"), | 
 | 	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"), | 
 | 	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"), | 
 | 	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"), | 
 | }; | 
 |  | 
 | static void __init hx4700_init(void) | 
 | { | 
 | 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); | 
 | 	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios)); | 
 |  | 
 | 	platform_add_devices(devices, ARRAY_SIZE(devices)); | 
 |  | 
 | 	pxa_set_ficp_info(&ficp_info); | 
 | 	pxa27x_set_i2c_power_info(NULL); | 
 | 	pxa_set_i2c_info(NULL); | 
 | 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); | 
 | 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); | 
 |  | 
 | 	hx4700_lcd_device = lcd_device_register("w100fb", NULL, | 
 | 					(void *)&w3220_info, &hx4700_lcd_ops); | 
 |  | 
 | 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0); | 
 | 	mdelay(10); | 
 | 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); | 
 | 	mdelay(10); | 
 | } | 
 |  | 
 | MACHINE_START(H4700, "HP iPAQ HX4700") | 
 | 	.phys_io      = 0x40000000, | 
 | 	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc, | 
 | 	.boot_params  = 0xa0000100, | 
 | 	.map_io       = pxa_map_io, | 
 | 	.init_irq     = pxa27x_init_irq, | 
 | 	.init_machine = hx4700_init, | 
 | 	.timer        = &pxa_timer, | 
 | MACHINE_END |