| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Accelerometer drivers |
| # |
| # When adding new entries keep the list in alphabetical order |
| |
| menu "Accelerometers" |
| |
| config ADIS16201 |
| tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say Y here to build support for Analog Devices adis16201 dual-axis |
| digital inclinometer and accelerometer. |
| |
| To compile this driver as a module, say M here: the module will |
| be called adis16201. |
| |
| config ADIS16209 |
| tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer |
| and accelerometer. |
| |
| To compile this driver as a module, say M here: the module will be |
| called adis16209. |
| |
| config ADXL313 |
| tristate |
| |
| config ADXL313_I2C |
| tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver" |
| depends on I2C |
| select ADXL313 |
| select REGMAP_I2C |
| help |
| Say Y here if you want to build i2c support for the Analog Devices |
| ADXL313 3-axis digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called adxl313_i2c and you will also get adxl313_core |
| for the core module. |
| |
| config ADXL313_SPI |
| tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver" |
| depends on SPI |
| select ADXL313 |
| select REGMAP_SPI |
| help |
| Say Y here if you want to build spi support for the Analog Devices |
| ADXL313 3-axis digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called adxl313_spi and you will also get adxl313_core |
| for the core module. |
| |
| config ADXL345 |
| tristate |
| |
| config ADXL345_I2C |
| tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver" |
| depends on INPUT_ADXL34X=n |
| depends on I2C |
| select ADXL345 |
| select REGMAP_I2C |
| help |
| Say Y here if you want to build support for the Analog Devices |
| ADXL345 or ADXL375 3-axis digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called adxl345_i2c and you will also get adxl345_core |
| for the core module. |
| |
| config ADXL345_SPI |
| tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver" |
| depends on INPUT_ADXL34X=n |
| depends on SPI |
| select ADXL345 |
| select REGMAP_SPI |
| help |
| Say Y here if you want to build support for the Analog Devices |
| ADXL345 or ADXL375 3-axis digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called adxl345_spi and you will also get adxl345_core |
| for the core module. |
| |
| config ADXL355 |
| tristate |
| |
| config ADXL355_I2C |
| tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer I2C Driver" |
| depends on I2C |
| select ADXL355 |
| select REGMAP_I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here if you want to build i2c support for the Analog Devices |
| ADXL355 3-axis digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called adxl355_i2c and you will also get adxl355_core |
| for the core module. |
| |
| config ADXL355_SPI |
| tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer SPI Driver" |
| depends on SPI |
| select ADXL355 |
| select REGMAP_SPI |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here if you want to build spi support for the Analog Devices |
| ADXL355 3-axis digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called adxl355_spi and you will also get adxl355_core |
| for the core module. |
| |
| config ADXL367 |
| tristate |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| |
| config ADXL367_SPI |
| tristate "Analog Devices ADXL367 3-Axis Accelerometer SPI Driver" |
| depends on SPI |
| select ADXL367 |
| select REGMAP_SPI |
| help |
| Say yes here to add support for the Analog Devices ADXL367 triaxial |
| acceleration sensor. |
| To compile this driver as a module, choose M here: the |
| module will be called adxl367_spi. |
| |
| config ADXL367_I2C |
| tristate "Analog Devices ADXL367 3-Axis Accelerometer I2C Driver" |
| depends on I2C |
| select ADXL367 |
| select REGMAP_I2C |
| help |
| Say yes here to add support for the Analog Devices ADXL367 triaxial |
| acceleration sensor. |
| To compile this driver as a module, choose M here: the |
| module will be called adxl367_i2c. |
| |
| config ADXL372 |
| tristate |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| |
| config ADXL372_SPI |
| tristate "Analog Devices ADXL372 3-Axis Accelerometer SPI Driver" |
| depends on SPI |
| select ADXL372 |
| select REGMAP_SPI |
| help |
| Say yes here to add support for the Analog Devices ADXL372 triaxial |
| acceleration sensor. |
| To compile this driver as a module, choose M here: the |
| module will be called adxl372_spi. |
| |
| config ADXL372_I2C |
| tristate "Analog Devices ADXL372 3-Axis Accelerometer I2C Driver" |
| depends on I2C |
| select ADXL372 |
| select REGMAP_I2C |
| help |
| Say yes here to add support for the Analog Devices ADXL372 triaxial |
| acceleration sensor. |
| To compile this driver as a module, choose M here: the |
| module will be called adxl372_i2c. |
| |
| config BMA180 |
| tristate "Bosch BMA023/BMA1x0/BMA250 3-Axis Accelerometer Driver" |
| depends on I2C && INPUT_BMA150=n |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here if you want to build a driver for the Bosch BMA023, BMA150 |
| BMA180, BMA250 or SMB380 triaxial acceleration sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bma180. |
| |
| config BMA220 |
| tristate "Bosch BMA220 3-Axis Accelerometer Driver" |
| depends on SPI |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to add support for the Bosch BMA220 triaxial |
| acceleration sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bma220_spi. |
| |
| config BMA400 |
| tristate "Bosch BMA400 3-Axis Accelerometer Driver" |
| select REGMAP |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select BMA400_I2C if I2C |
| select BMA400_SPI if SPI |
| help |
| Say Y here if you want to build a driver for the Bosch BMA400 |
| triaxial acceleration sensor. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bma400_core and you will also get |
| bma400_i2c if I2C is enabled and bma400_spi if SPI is |
| enabled. |
| |
| config BMA400_I2C |
| tristate |
| depends on BMA400 |
| |
| config BMA400_SPI |
| tristate |
| depends on BMA400 |
| |
| config BMC150_ACCEL |
| tristate "Bosch BMC150 Accelerometer Driver" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP |
| select BMC150_ACCEL_I2C if I2C |
| select BMC150_ACCEL_SPI if SPI |
| help |
| Say yes here to build support for the following Bosch accelerometers: |
| BMA222, BMA222E, BMA250E, BMA253, BMA254, BMA255, BMA280, BMC150, BMC156 |
| BMI055. |
| |
| Note that some of these are combo modules: |
| - BMC150/BMC156: accelerometer and magnetometer |
| - BMI055: accelerometer and gyroscope |
| |
| This driver is only implementing accelerometer part, which has |
| its own address and register map. |
| |
| config BMC150_ACCEL_I2C |
| tristate |
| select REGMAP_I2C |
| |
| config BMC150_ACCEL_SPI |
| tristate |
| select REGMAP_SPI |
| |
| config BMI088_ACCEL |
| tristate "Bosch BMI088 Accelerometer Driver" |
| depends on SPI |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP |
| select BMI088_ACCEL_SPI |
| help |
| Say yes here to build support for the Bosch BMI088 accelerometer. |
| |
| This is a combo module with both accelerometer and gyroscope. This |
| driver only implements the accelerometer part, which has its own |
| address and register map. BMG160 provides the gyroscope driver. |
| |
| config BMI088_ACCEL_SPI |
| tristate |
| select REGMAP_SPI |
| |
| config DA280 |
| tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver" |
| depends on I2C |
| help |
| Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit |
| digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called da280. |
| |
| config DA311 |
| tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver" |
| depends on I2C |
| help |
| Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit |
| digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called da311. |
| |
| config DMARD06 |
| tristate "Domintech DMARD06 Digital Accelerometer Driver" |
| depends on I2C |
| help |
| Say yes here to build support for the Domintech low-g tri-axial |
| digital accelerometers: DMARD05, DMARD06, DMARD07. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dmard06. |
| |
| config DMARD09 |
| tristate "Domintech DMARD09 3-axis Accelerometer Driver" |
| depends on I2C |
| help |
| Say yes here to get support for the Domintech DMARD09 3-axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called dmard09. |
| |
| config DMARD10 |
| tristate "Domintech DMARD10 3-axis Accelerometer Driver" |
| depends on I2C |
| help |
| Say yes here to get support for the Domintech DMARD10 3-axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called dmard10. |
| |
| config FXLS8962AF |
| tristate |
| depends on I2C || !I2C # cannot be built-in for modular I2C |
| |
| config FXLS8962AF_I2C |
| tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer I2C Driver" |
| depends on I2C |
| select FXLS8962AF |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the NXP 3-axis automotive |
| accelerometer FXLS8962AF/FXLS8964AF with I2C support. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called fxls8962af_i2c. |
| |
| config FXLS8962AF_SPI |
| tristate "NXP FXLS8962AF/FXLS8964AF Accelerometer SPI Driver" |
| depends on SPI |
| depends on I2C || !I2C |
| select FXLS8962AF |
| select REGMAP_SPI |
| help |
| Say yes here to build support for the NXP 3-axis automotive |
| accelerometer FXLS8962AF/FXLS8964AF with SPI support. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called fxls8962af_spi. |
| |
| config HID_SENSOR_ACCEL_3D |
| depends on HID_SENSOR_HUB |
| select IIO_BUFFER |
| select HID_SENSOR_IIO_COMMON |
| select HID_SENSOR_IIO_TRIGGER |
| tristate "HID Accelerometers 3D" |
| help |
| Say yes here to build support for the HID SENSOR |
| accelerometers 3D. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-sensor-accel-3d. |
| |
| config IIO_CROS_EC_ACCEL_LEGACY |
| tristate "ChromeOS EC Legacy Accelerometer Sensor" |
| depends on IIO_CROS_EC_SENSORS_CORE |
| help |
| Say yes here to get support for accelerometers on Chromebook using |
| legacy EC firmware. |
| Sensor data is retrieved through IO memory. |
| Newer devices should use IIO_CROS_EC_SENSORS. |
| |
| config IIO_ST_ACCEL_3AXIS |
| tristate "STMicroelectronics accelerometers 3-Axis Driver" |
| depends on (I2C || SPI_MASTER) && SYSFS |
| depends on !SENSORS_LIS3_I2C |
| depends on !SENSORS_LIS3_SPI |
| select IIO_ST_SENSORS_CORE |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) |
| help |
| Say yes here to build support for STMicroelectronics accelerometers: |
| LSM303C, LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, |
| LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL, |
| LNG2DM, LIS3DE, LIS2DE12, LIS2HH12 |
| |
| Also need to enable at least one of I2C and SPI interface drivers |
| below. |
| |
| config IIO_ST_ACCEL_I2C_3AXIS |
| tristate "STMicroelectronics accelerometers 3-Axis I2C Interface" |
| depends on I2C && IIO_ST_ACCEL_3AXIS |
| default I2C && IIO_ST_ACCEL_3AXIS |
| select IIO_ST_SENSORS_I2C |
| help |
| Build support for STMicroelectronics accelerometers I2C interface. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called st_accel_i2c. |
| |
| config IIO_ST_ACCEL_SPI_3AXIS |
| tristate "STMicroelectronics accelerometers 3-Axis SPI Interface" |
| depends on SPI_MASTER && IIO_ST_ACCEL_3AXIS |
| default SPI_MASTER && IIO_ST_ACCEL_3AXIS |
| select IIO_ST_SENSORS_SPI |
| help |
| Build support for STMicroelectronics accelerometers SPI interface. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called st_accel_spi. |
| |
| config IIO_KX022A |
| tristate |
| |
| config IIO_KX022A_SPI |
| tristate "Kionix KX022A tri-axis digital accelerometer SPI interface" |
| depends on SPI |
| select IIO_KX022A |
| select REGMAP_SPI |
| help |
| Enable support for the Kionix KX022A digital tri-axis |
| accelerometer connected to I2C interface. |
| |
| config IIO_KX022A_I2C |
| tristate "Kionix KX022A tri-axis digital accelerometer I2C interface" |
| depends on I2C |
| select IIO_KX022A |
| select REGMAP_I2C |
| help |
| Enable support for the Kionix KX022A digital tri-axis |
| accelerometer connected to I2C interface. |
| |
| config KXSD9 |
| tristate "Kionix KXSD9 Accelerometer Driver" |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for the Kionix KXSD9 accelerometer. |
| It can be accessed using an (optional) SPI or I2C interface. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called kxsd9. |
| |
| config KXSD9_SPI |
| tristate "Kionix KXSD9 SPI transport" |
| depends on KXSD9 |
| depends on SPI |
| default KXSD9 |
| select REGMAP_SPI |
| help |
| Say yes here to enable the Kionix KXSD9 accelerometer |
| SPI transport channel. |
| |
| config KXSD9_I2C |
| tristate "Kionix KXSD9 I2C transport" |
| depends on KXSD9 |
| depends on I2C |
| default KXSD9 |
| select REGMAP_I2C |
| help |
| Say yes here to enable the Kionix KXSD9 accelerometer |
| I2C transport channel. |
| |
| config KXCJK1013 |
| tristate "Kionix 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here if you want to build a driver for the Kionix KXCJK-1013 |
| triaxial acceleration sensor. This driver also supports KXCJ9-1008, |
| KXTJ2-1009 and KXTF9. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called kxcjk-1013. |
| |
| config MC3230 |
| tristate "mCube MC3230 Digital Accelerometer Driver" |
| depends on I2C |
| help |
| Say yes here to build support for the mCube MC3230 low-g tri-axial |
| digital accelerometer. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mc3230. |
| |
| config MMA7455 |
| tristate |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| |
| config MMA7455_I2C |
| tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" |
| depends on I2C |
| select MMA7455 |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the Freescale MMA7455L and |
| MMA7456L 3-axis accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma7455_i2c. |
| |
| config MMA7455_SPI |
| tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" |
| depends on SPI_MASTER |
| select MMA7455 |
| select REGMAP_SPI |
| help |
| Say yes here to build support for the Freescale MMA7455L and |
| MMA7456L 3-axis accelerometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma7455_spi. |
| |
| config MMA7660 |
| tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" |
| depends on I2C |
| help |
| Say yes here to get support for the Freescale MMA7660FC 3-Axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called mma7660. |
| |
| config MMA8452 |
| tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for the following Freescale / NXP 3-axis |
| accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, |
| FXLS8471Q. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma8452. |
| |
| config MMA9551_CORE |
| tristate |
| |
| config MMA9551 |
| tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" |
| depends on I2C |
| select MMA9551_CORE |
| |
| help |
| Say yes here to build support for the Freescale MMA9551L |
| Intelligent Motion-Sensing Platform Driver. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma9551. |
| |
| config MMA9553 |
| tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" |
| depends on I2C |
| select MMA9551_CORE |
| help |
| Say yes here to build support for the Freescale MMA9553L |
| Intelligent Pedometer Platform Driver. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mma9553. |
| |
| config MSA311 |
| tristate "MEMSensing Digital 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the MEMSensing MSA311 |
| accelerometer driver. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called msa311. |
| |
| config MXC4005 |
| tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the Memsic MXC4005XC 3-axis |
| accelerometer. |
| |
| To compile this driver as a module, choose M. The module will be |
| called mxc4005. |
| |
| config MXC6255 |
| tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" |
| depends on I2C |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the Memsic MXC6255 Orientation |
| Sensing Accelerometer Driver. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called mxc6255. |
| |
| config SCA3000 |
| select IIO_BUFFER |
| select IIO_KFIFO_BUF |
| depends on SPI |
| tristate "VTI SCA3000 series accelerometers" |
| help |
| Say Y here to build support for the VTI SCA3000 series of SPI |
| accelerometers. These devices use a hardware ring buffer. |
| |
| To compile this driver as a module, say M here: the module will be |
| called sca3000. |
| |
| config SCA3300 |
| tristate "Murata SCA3300 3-Axis Accelerometer Driver" |
| depends on SPI |
| select CRC8 |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for Murata SCA3300 3-Axis |
| accelerometer. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called sca3300. |
| |
| config STK8312 |
| tristate "Sensortek STK8312 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to get support for the Sensortek STK8312 3-axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called stk8312. |
| |
| config STK8BA50 |
| tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to get support for the Sensortek STK8BA50 3-axis |
| accelerometer. |
| |
| Choosing M will build the driver as a module. If so, the module |
| will be called stk8ba50. |
| |
| endmenu |
