| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Renesas RZ/G2L WDT Watchdog Driver |
| * |
| * Copyright (C) 2021 Renesas Electronics Corporation |
| */ |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/reset.h> |
| #include <linux/units.h> |
| #include <linux/watchdog.h> |
| |
| #define WDTCNT 0x00 |
| #define WDTSET 0x04 |
| #define WDTTIM 0x08 |
| #define WDTINT 0x0C |
| #define PECR 0x10 |
| #define PEEN 0x14 |
| #define WDTCNT_WDTEN BIT(0) |
| #define WDTINT_INTDISP BIT(0) |
| #define PEEN_FORCE BIT(0) |
| |
| #define WDT_DEFAULT_TIMEOUT 60U |
| |
| /* Setting period time register only 12 bit set in WDTSET[31:20] */ |
| #define WDTSET_COUNTER_MASK (0xFFF00000) |
| #define WDTSET_COUNTER_VAL(f) ((f) << 20) |
| |
| #define F2CYCLE_NSEC(f) (1000000000 / (f)) |
| |
| #define RZV2M_A_NSEC 730 |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| enum rz_wdt_type { |
| WDT_RZG2L, |
| WDT_RZV2M, |
| }; |
| |
| struct rzg2l_wdt_priv { |
| void __iomem *base; |
| struct watchdog_device wdev; |
| struct reset_control *rstc; |
| unsigned long osc_clk_rate; |
| unsigned long delay; |
| unsigned long minimum_assertion_period; |
| struct clk *pclk; |
| struct clk *osc_clk; |
| enum rz_wdt_type devtype; |
| }; |
| |
| static int rzg2l_wdt_reset(struct rzg2l_wdt_priv *priv) |
| { |
| int err, status; |
| |
| if (priv->devtype == WDT_RZV2M) { |
| /* WDT needs TYPE-B reset control */ |
| err = reset_control_assert(priv->rstc); |
| if (err) |
| return err; |
| ndelay(priv->minimum_assertion_period); |
| err = reset_control_deassert(priv->rstc); |
| if (err) |
| return err; |
| err = read_poll_timeout(reset_control_status, status, |
| status != 1, 0, 1000, false, |
| priv->rstc); |
| } else { |
| err = reset_control_reset(priv->rstc); |
| } |
| |
| return err; |
| } |
| |
| static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv) |
| { |
| /* delay timer when change the setting register */ |
| ndelay(priv->delay); |
| } |
| |
| static u32 rzg2l_wdt_get_cycle_usec(unsigned long cycle, u32 wdttime) |
| { |
| u64 timer_cycle_us = 1024 * 1024ULL * (wdttime + 1) * MICRO; |
| |
| return div64_ul(timer_cycle_us, cycle); |
| } |
| |
| static void rzg2l_wdt_write(struct rzg2l_wdt_priv *priv, u32 val, unsigned int reg) |
| { |
| if (reg == WDTSET) |
| val &= WDTSET_COUNTER_MASK; |
| |
| writel_relaxed(val, priv->base + reg); |
| /* Registers other than the WDTINT is always synchronized with WDT_CLK */ |
| if (reg != WDTINT) |
| rzg2l_wdt_wait_delay(priv); |
| } |
| |
| static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev) |
| { |
| struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); |
| u32 time_out; |
| |
| /* Clear Lapsed Time Register and clear Interrupt */ |
| rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT); |
| /* 2 consecutive overflow cycle needed to trigger reset */ |
| time_out = (wdev->timeout * (MICRO / 2)) / |
| rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0); |
| rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(time_out), WDTSET); |
| } |
| |
| static int rzg2l_wdt_start(struct watchdog_device *wdev) |
| { |
| struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); |
| |
| pm_runtime_get_sync(wdev->parent); |
| |
| /* Initialize time out */ |
| rzg2l_wdt_init_timeout(wdev); |
| |
| /* Initialize watchdog counter register */ |
| rzg2l_wdt_write(priv, 0, WDTTIM); |
| |
| /* Enable watchdog timer*/ |
| rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT); |
| |
| return 0; |
| } |
| |
| static int rzg2l_wdt_stop(struct watchdog_device *wdev) |
| { |
| struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); |
| |
| rzg2l_wdt_reset(priv); |
| pm_runtime_put(wdev->parent); |
| |
| return 0; |
| } |
| |
| static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int timeout) |
| { |
| wdev->timeout = timeout; |
| |
| /* |
| * If the watchdog is active, reset the module for updating the WDTSET |
| * register by calling rzg2l_wdt_stop() (which internally calls reset_control_reset() |
| * to reset the module) so that it is updated with new timeout values. |
| */ |
| if (watchdog_active(wdev)) { |
| rzg2l_wdt_stop(wdev); |
| rzg2l_wdt_start(wdev); |
| } |
| |
| return 0; |
| } |
| |
| static int rzg2l_wdt_restart(struct watchdog_device *wdev, |
| unsigned long action, void *data) |
| { |
| struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); |
| |
| clk_prepare_enable(priv->pclk); |
| clk_prepare_enable(priv->osc_clk); |
| |
| if (priv->devtype == WDT_RZG2L) { |
| /* Generate Reset (WDTRSTB) Signal on parity error */ |
| rzg2l_wdt_write(priv, 0, PECR); |
| |
| /* Force parity error */ |
| rzg2l_wdt_write(priv, PEEN_FORCE, PEEN); |
| } else { |
| /* RZ/V2M doesn't have parity error registers */ |
| rzg2l_wdt_reset(priv); |
| |
| wdev->timeout = 0; |
| |
| /* Initialize time out */ |
| rzg2l_wdt_init_timeout(wdev); |
| |
| /* Initialize watchdog counter register */ |
| rzg2l_wdt_write(priv, 0, WDTTIM); |
| |
| /* Enable watchdog timer*/ |
| rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT); |
| |
| /* Wait 2 consecutive overflow cycles for reset */ |
| mdelay(DIV_ROUND_UP(2 * 0xFFFFF * 1000, priv->osc_clk_rate)); |
| } |
| |
| return 0; |
| } |
| |
| static const struct watchdog_info rzg2l_wdt_ident = { |
| .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, |
| .identity = "Renesas RZ/G2L WDT Watchdog", |
| }; |
| |
| static int rzg2l_wdt_ping(struct watchdog_device *wdev) |
| { |
| struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); |
| |
| rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT); |
| |
| return 0; |
| } |
| |
| static const struct watchdog_ops rzg2l_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = rzg2l_wdt_start, |
| .stop = rzg2l_wdt_stop, |
| .ping = rzg2l_wdt_ping, |
| .set_timeout = rzg2l_wdt_set_timeout, |
| .restart = rzg2l_wdt_restart, |
| }; |
| |
| static void rzg2l_wdt_reset_assert_pm_disable(void *data) |
| { |
| struct watchdog_device *wdev = data; |
| struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); |
| |
| pm_runtime_disable(wdev->parent); |
| reset_control_assert(priv->rstc); |
| } |
| |
| static int rzg2l_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rzg2l_wdt_priv *priv; |
| unsigned long pclk_rate; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| /* Get watchdog main clock */ |
| priv->osc_clk = devm_clk_get(&pdev->dev, "oscclk"); |
| if (IS_ERR(priv->osc_clk)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(priv->osc_clk), "no oscclk"); |
| |
| priv->osc_clk_rate = clk_get_rate(priv->osc_clk); |
| if (!priv->osc_clk_rate) |
| return dev_err_probe(&pdev->dev, -EINVAL, "oscclk rate is 0"); |
| |
| /* Get Peripheral clock */ |
| priv->pclk = devm_clk_get(&pdev->dev, "pclk"); |
| if (IS_ERR(priv->pclk)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(priv->pclk), "no pclk"); |
| |
| pclk_rate = clk_get_rate(priv->pclk); |
| if (!pclk_rate) |
| return dev_err_probe(&pdev->dev, -EINVAL, "pclk rate is 0"); |
| |
| priv->delay = F2CYCLE_NSEC(priv->osc_clk_rate) * 6 + F2CYCLE_NSEC(pclk_rate) * 9; |
| |
| priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); |
| if (IS_ERR(priv->rstc)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc), |
| "failed to get cpg reset"); |
| |
| ret = reset_control_deassert(priv->rstc); |
| if (ret) |
| return dev_err_probe(dev, ret, "failed to deassert"); |
| |
| priv->devtype = (uintptr_t)of_device_get_match_data(dev); |
| |
| if (priv->devtype == WDT_RZV2M) { |
| priv->minimum_assertion_period = RZV2M_A_NSEC + |
| 3 * F2CYCLE_NSEC(pclk_rate) + 5 * |
| max(F2CYCLE_NSEC(priv->osc_clk_rate), |
| F2CYCLE_NSEC(pclk_rate)); |
| } |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| priv->wdev.info = &rzg2l_wdt_ident; |
| priv->wdev.ops = &rzg2l_wdt_ops; |
| priv->wdev.parent = dev; |
| priv->wdev.min_timeout = 1; |
| priv->wdev.max_timeout = rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0xfff) / |
| USEC_PER_SEC; |
| priv->wdev.timeout = WDT_DEFAULT_TIMEOUT; |
| |
| watchdog_set_drvdata(&priv->wdev, priv); |
| ret = devm_add_action_or_reset(&pdev->dev, |
| rzg2l_wdt_reset_assert_pm_disable, |
| &priv->wdev); |
| if (ret < 0) |
| return ret; |
| |
| watchdog_set_nowayout(&priv->wdev, nowayout); |
| watchdog_stop_on_unregister(&priv->wdev); |
| |
| ret = watchdog_init_timeout(&priv->wdev, 0, dev); |
| if (ret) |
| dev_warn(dev, "Specified timeout invalid, using default"); |
| |
| return devm_watchdog_register_device(&pdev->dev, &priv->wdev); |
| } |
| |
| static const struct of_device_id rzg2l_wdt_ids[] = { |
| { .compatible = "renesas,rzg2l-wdt", .data = (void *)WDT_RZG2L }, |
| { .compatible = "renesas,rzv2m-wdt", .data = (void *)WDT_RZV2M }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, rzg2l_wdt_ids); |
| |
| static struct platform_driver rzg2l_wdt_driver = { |
| .driver = { |
| .name = "rzg2l_wdt", |
| .of_match_table = rzg2l_wdt_ids, |
| }, |
| .probe = rzg2l_wdt_probe, |
| }; |
| module_platform_driver(rzg2l_wdt_driver); |
| |
| MODULE_DESCRIPTION("Renesas RZ/G2L WDT Watchdog Driver"); |
| MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>"); |
| MODULE_LICENSE("GPL v2"); |