| /* |
| * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. |
| * Author: Liviu Dudau <Liviu.Dudau@arm.com> |
| * |
| * This program is free software and is provided to you under the terms of the |
| * GNU General Public License version 2 as published by the Free Software |
| * Foundation, and any use by you of this program is subject to the terms |
| * of such GNU licence. |
| * |
| * ARM Mali DP plane manipulation routines. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_print.h> |
| |
| #include "malidp_hw.h" |
| #include "malidp_drv.h" |
| |
| /* Layer specific register offsets */ |
| #define MALIDP_LAYER_FORMAT 0x000 |
| #define MALIDP_LAYER_CONTROL 0x004 |
| #define LAYER_ENABLE (1 << 0) |
| #define LAYER_FLOWCFG_MASK 7 |
| #define LAYER_FLOWCFG(x) (((x) & LAYER_FLOWCFG_MASK) << 1) |
| #define LAYER_FLOWCFG_SCALE_SE 3 |
| #define LAYER_ROT_OFFSET 8 |
| #define LAYER_H_FLIP (1 << 10) |
| #define LAYER_V_FLIP (1 << 11) |
| #define LAYER_ROT_MASK (0xf << 8) |
| #define LAYER_COMP_MASK (0x3 << 12) |
| #define LAYER_COMP_PIXEL (0x3 << 12) |
| #define LAYER_COMP_PLANE (0x2 << 12) |
| #define MALIDP_LAYER_COMPOSE 0x008 |
| #define MALIDP_LAYER_SIZE 0x00c |
| #define LAYER_H_VAL(x) (((x) & 0x1fff) << 0) |
| #define LAYER_V_VAL(x) (((x) & 0x1fff) << 16) |
| #define MALIDP_LAYER_COMP_SIZE 0x010 |
| #define MALIDP_LAYER_OFFSET 0x014 |
| #define MALIDP550_LS_ENABLE 0x01c |
| #define MALIDP550_LS_R1_IN_SIZE 0x020 |
| |
| /* |
| * This 4-entry look-up-table is used to determine the full 8-bit alpha value |
| * for formats with 1- or 2-bit alpha channels. |
| * We set it to give 100%/0% opacity for 1-bit formats and 100%/66%/33%/0% |
| * opacity for 2-bit formats. |
| */ |
| #define MALIDP_ALPHA_LUT 0xffaa5500 |
| |
| static void malidp_de_plane_destroy(struct drm_plane *plane) |
| { |
| struct malidp_plane *mp = to_malidp_plane(plane); |
| |
| if (mp->base.fb) |
| drm_framebuffer_unreference(mp->base.fb); |
| |
| drm_plane_helper_disable(plane); |
| drm_plane_cleanup(plane); |
| devm_kfree(plane->dev->dev, mp); |
| } |
| |
| /* |
| * Replicate what the default ->reset hook does: free the state pointer and |
| * allocate a new empty object. We just need enough space to store |
| * a malidp_plane_state instead of a drm_plane_state. |
| */ |
| static void malidp_plane_reset(struct drm_plane *plane) |
| { |
| struct malidp_plane_state *state = to_malidp_plane_state(plane->state); |
| |
| if (state) |
| __drm_atomic_helper_plane_destroy_state(&state->base); |
| kfree(state); |
| plane->state = NULL; |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (state) { |
| state->base.plane = plane; |
| state->base.rotation = DRM_MODE_ROTATE_0; |
| plane->state = &state->base; |
| } |
| } |
| |
| static struct |
| drm_plane_state *malidp_duplicate_plane_state(struct drm_plane *plane) |
| { |
| struct malidp_plane_state *state, *m_state; |
| |
| if (!plane->state) |
| return NULL; |
| |
| state = kmalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| m_state = to_malidp_plane_state(plane->state); |
| __drm_atomic_helper_plane_duplicate_state(plane, &state->base); |
| state->rotmem_size = m_state->rotmem_size; |
| state->format = m_state->format; |
| state->n_planes = m_state->n_planes; |
| |
| return &state->base; |
| } |
| |
| static void malidp_destroy_plane_state(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct malidp_plane_state *m_state = to_malidp_plane_state(state); |
| |
| __drm_atomic_helper_plane_destroy_state(state); |
| kfree(m_state); |
| } |
| |
| static void malidp_plane_atomic_print_state(struct drm_printer *p, |
| const struct drm_plane_state *state) |
| { |
| struct malidp_plane_state *ms = to_malidp_plane_state(state); |
| |
| drm_printf(p, "\trotmem_size=%u\n", ms->rotmem_size); |
| drm_printf(p, "\tformat_id=%u\n", ms->format); |
| drm_printf(p, "\tn_planes=%u\n", ms->n_planes); |
| } |
| |
| static const struct drm_plane_funcs malidp_de_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .set_property = drm_atomic_helper_plane_set_property, |
| .destroy = malidp_de_plane_destroy, |
| .reset = malidp_plane_reset, |
| .atomic_duplicate_state = malidp_duplicate_plane_state, |
| .atomic_destroy_state = malidp_destroy_plane_state, |
| .atomic_print_state = malidp_plane_atomic_print_state, |
| }; |
| |
| static int malidp_se_check_scaling(struct malidp_plane *mp, |
| struct drm_plane_state *state) |
| { |
| struct drm_crtc_state *crtc_state = |
| drm_atomic_get_existing_crtc_state(state->state, state->crtc); |
| struct malidp_crtc_state *mc; |
| struct drm_rect clip = { 0 }; |
| u32 src_w, src_h; |
| int ret; |
| |
| if (!crtc_state) |
| return -EINVAL; |
| |
| clip.x2 = crtc_state->adjusted_mode.hdisplay; |
| clip.y2 = crtc_state->adjusted_mode.vdisplay; |
| ret = drm_plane_helper_check_state(state, &clip, 0, INT_MAX, true, true); |
| if (ret) |
| return ret; |
| |
| src_w = state->src_w >> 16; |
| src_h = state->src_h >> 16; |
| if ((state->crtc_w == src_w) && (state->crtc_h == src_h)) { |
| /* Scaling not necessary for this plane. */ |
| mc->scaled_planes_mask &= ~(mp->layer->id); |
| return 0; |
| } |
| |
| if (mp->layer->id & (DE_SMART | DE_GRAPHICS2)) |
| return -EINVAL; |
| |
| mc = to_malidp_crtc_state(crtc_state); |
| |
| mc->scaled_planes_mask |= mp->layer->id; |
| /* Defer scaling requirements calculation to the crtc check. */ |
| return 0; |
| } |
| |
| static int malidp_de_plane_check(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct malidp_plane *mp = to_malidp_plane(plane); |
| struct malidp_plane_state *ms = to_malidp_plane_state(state); |
| struct drm_framebuffer *fb; |
| int i, ret; |
| |
| if (!state->crtc || !state->fb) |
| return 0; |
| |
| fb = state->fb; |
| |
| ms->format = malidp_hw_get_format_id(&mp->hwdev->map, mp->layer->id, |
| fb->format->format); |
| if (ms->format == MALIDP_INVALID_FORMAT_ID) |
| return -EINVAL; |
| |
| ms->n_planes = fb->format->num_planes; |
| for (i = 0; i < ms->n_planes; i++) { |
| if (!malidp_hw_pitch_valid(mp->hwdev, fb->pitches[i])) { |
| DRM_DEBUG_KMS("Invalid pitch %u for plane %d\n", |
| fb->pitches[i], i); |
| return -EINVAL; |
| } |
| } |
| |
| if ((state->crtc_w > mp->hwdev->max_line_size) || |
| (state->crtc_h > mp->hwdev->max_line_size) || |
| (state->crtc_w < mp->hwdev->min_line_size) || |
| (state->crtc_h < mp->hwdev->min_line_size)) |
| return -EINVAL; |
| |
| /* |
| * DP550/650 video layers can accept 3 plane formats only if |
| * fb->pitches[1] == fb->pitches[2] since they don't have a |
| * third plane stride register. |
| */ |
| if (ms->n_planes == 3 && |
| !(mp->hwdev->features & MALIDP_DEVICE_LV_HAS_3_STRIDES) && |
| (state->fb->pitches[1] != state->fb->pitches[2])) |
| return -EINVAL; |
| |
| ret = malidp_se_check_scaling(mp, state); |
| if (ret) |
| return ret; |
| |
| /* packed RGB888 / BGR888 can't be rotated or flipped */ |
| if (state->rotation != DRM_MODE_ROTATE_0 && |
| (fb->format->format == DRM_FORMAT_RGB888 || |
| fb->format->format == DRM_FORMAT_BGR888)) |
| return -EINVAL; |
| |
| ms->rotmem_size = 0; |
| if (state->rotation & MALIDP_ROTATED_MASK) { |
| int val; |
| |
| val = mp->hwdev->rotmem_required(mp->hwdev, state->crtc_h, |
| state->crtc_w, |
| fb->format->format); |
| if (val < 0) |
| return val; |
| |
| ms->rotmem_size = val; |
| } |
| |
| return 0; |
| } |
| |
| static void malidp_de_set_plane_pitches(struct malidp_plane *mp, |
| int num_planes, unsigned int pitches[3]) |
| { |
| int i; |
| int num_strides = num_planes; |
| |
| if (!mp->layer->stride_offset) |
| return; |
| |
| if (num_planes == 3) |
| num_strides = (mp->hwdev->features & |
| MALIDP_DEVICE_LV_HAS_3_STRIDES) ? 3 : 2; |
| |
| for (i = 0; i < num_strides; ++i) |
| malidp_hw_write(mp->hwdev, pitches[i], |
| mp->layer->base + |
| mp->layer->stride_offset + i * 4); |
| } |
| |
| static void malidp_de_plane_update(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct malidp_plane *mp; |
| const struct malidp_hw_regmap *map; |
| struct malidp_plane_state *ms = to_malidp_plane_state(plane->state); |
| u32 src_w, src_h, dest_w, dest_h, val; |
| int i; |
| |
| mp = to_malidp_plane(plane); |
| map = &mp->hwdev->map; |
| |
| /* convert src values from Q16 fixed point to integer */ |
| src_w = plane->state->src_w >> 16; |
| src_h = plane->state->src_h >> 16; |
| dest_w = plane->state->crtc_w; |
| dest_h = plane->state->crtc_h; |
| |
| malidp_hw_write(mp->hwdev, ms->format, mp->layer->base); |
| |
| for (i = 0; i < ms->n_planes; i++) { |
| /* calculate the offset for the layer's plane registers */ |
| u16 ptr = mp->layer->ptr + (i << 4); |
| dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(plane->state->fb, |
| plane->state, i); |
| |
| malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr); |
| malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4); |
| } |
| malidp_de_set_plane_pitches(mp, ms->n_planes, |
| plane->state->fb->pitches); |
| |
| malidp_hw_write(mp->hwdev, LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h), |
| mp->layer->base + MALIDP_LAYER_SIZE); |
| |
| malidp_hw_write(mp->hwdev, LAYER_H_VAL(dest_w) | LAYER_V_VAL(dest_h), |
| mp->layer->base + MALIDP_LAYER_COMP_SIZE); |
| |
| malidp_hw_write(mp->hwdev, LAYER_H_VAL(plane->state->crtc_x) | |
| LAYER_V_VAL(plane->state->crtc_y), |
| mp->layer->base + MALIDP_LAYER_OFFSET); |
| |
| if (mp->layer->id == DE_SMART) |
| malidp_hw_write(mp->hwdev, |
| LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h), |
| mp->layer->base + MALIDP550_LS_R1_IN_SIZE); |
| |
| /* first clear the rotation bits */ |
| val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL); |
| val &= ~LAYER_ROT_MASK; |
| |
| /* setup the rotation and axis flip bits */ |
| if (plane->state->rotation & DRM_MODE_ROTATE_MASK) |
| val |= ilog2(plane->state->rotation & DRM_MODE_ROTATE_MASK) << |
| LAYER_ROT_OFFSET; |
| if (plane->state->rotation & DRM_MODE_REFLECT_X) |
| val |= LAYER_H_FLIP; |
| if (plane->state->rotation & DRM_MODE_REFLECT_Y) |
| val |= LAYER_V_FLIP; |
| |
| /* |
| * always enable pixel alpha blending until we have a way to change |
| * blend modes |
| */ |
| val &= ~LAYER_COMP_MASK; |
| val |= LAYER_COMP_PIXEL; |
| |
| val &= ~LAYER_FLOWCFG(LAYER_FLOWCFG_MASK); |
| if (plane->state->crtc) { |
| struct malidp_crtc_state *m = |
| to_malidp_crtc_state(plane->state->crtc->state); |
| |
| if (m->scaler_config.scale_enable && |
| m->scaler_config.plane_src_id == mp->layer->id) |
| val |= LAYER_FLOWCFG(LAYER_FLOWCFG_SCALE_SE); |
| } |
| |
| /* set the 'enable layer' bit */ |
| val |= LAYER_ENABLE; |
| |
| malidp_hw_write(mp->hwdev, val, |
| mp->layer->base + MALIDP_LAYER_CONTROL); |
| } |
| |
| static void malidp_de_plane_disable(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct malidp_plane *mp = to_malidp_plane(plane); |
| |
| malidp_hw_clearbits(mp->hwdev, |
| LAYER_ENABLE | LAYER_FLOWCFG(LAYER_FLOWCFG_MASK), |
| mp->layer->base + MALIDP_LAYER_CONTROL); |
| } |
| |
| static const struct drm_plane_helper_funcs malidp_de_plane_helper_funcs = { |
| .atomic_check = malidp_de_plane_check, |
| .atomic_update = malidp_de_plane_update, |
| .atomic_disable = malidp_de_plane_disable, |
| }; |
| |
| int malidp_de_planes_init(struct drm_device *drm) |
| { |
| struct malidp_drm *malidp = drm->dev_private; |
| const struct malidp_hw_regmap *map = &malidp->dev->map; |
| struct malidp_plane *plane = NULL; |
| enum drm_plane_type plane_type; |
| unsigned long crtcs = 1 << drm->mode_config.num_crtc; |
| unsigned long flags = DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 | |
| DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y; |
| u32 *formats; |
| int ret, i, j, n; |
| |
| formats = kcalloc(map->n_pixel_formats, sizeof(*formats), GFP_KERNEL); |
| if (!formats) { |
| ret = -ENOMEM; |
| goto cleanup; |
| } |
| |
| for (i = 0; i < map->n_layers; i++) { |
| u8 id = map->layers[i].id; |
| |
| plane = kzalloc(sizeof(*plane), GFP_KERNEL); |
| if (!plane) { |
| ret = -ENOMEM; |
| goto cleanup; |
| } |
| |
| /* build the list of DRM supported formats based on the map */ |
| for (n = 0, j = 0; j < map->n_pixel_formats; j++) { |
| if ((map->pixel_formats[j].layer & id) == id) |
| formats[n++] = map->pixel_formats[j].format; |
| } |
| |
| plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : |
| DRM_PLANE_TYPE_OVERLAY; |
| ret = drm_universal_plane_init(drm, &plane->base, crtcs, |
| &malidp_de_plane_funcs, formats, |
| n, plane_type, NULL); |
| if (ret < 0) |
| goto cleanup; |
| |
| drm_plane_helper_add(&plane->base, |
| &malidp_de_plane_helper_funcs); |
| plane->hwdev = malidp->dev; |
| plane->layer = &map->layers[i]; |
| |
| if (id == DE_SMART) { |
| /* |
| * Enable the first rectangle in the SMART layer to be |
| * able to use it as a drm plane. |
| */ |
| malidp_hw_write(malidp->dev, 1, |
| plane->layer->base + MALIDP550_LS_ENABLE); |
| /* Skip the features which the SMART layer doesn't have. */ |
| continue; |
| } |
| |
| drm_plane_create_rotation_property(&plane->base, DRM_MODE_ROTATE_0, flags); |
| malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT, |
| plane->layer->base + MALIDP_LAYER_COMPOSE); |
| } |
| |
| kfree(formats); |
| |
| return 0; |
| |
| cleanup: |
| malidp_de_planes_destroy(drm); |
| kfree(formats); |
| |
| return ret; |
| } |
| |
| void malidp_de_planes_destroy(struct drm_device *drm) |
| { |
| struct drm_plane *p, *pt; |
| |
| list_for_each_entry_safe(p, pt, &drm->mode_config.plane_list, head) { |
| drm_plane_cleanup(p); |
| kfree(p); |
| } |
| } |