blob: c58d200e4816b81abe41aecc4afcbce6e52a515b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-omap1/clock_data.c
*
* Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* To do:
* - Clocks that are only available on some chips should be marked with the
* chips that they are present on.
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/soc/ti/omap1-io.h>
#include <asm/mach-types.h> /* for machine_is_* */
#include "soc.h"
#include "hardware.h"
#include "usb.h" /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
#define IDLTIM_ARM_SHIFT 9
#define IDLAPI_ARM_SHIFT 8
#define IDLIF_ARM_SHIFT 6
#define IDLLB_ARM_SHIFT 4 /* undocumented? */
#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */
#define IDLPER_ARM_SHIFT 2
#define IDLXORP_ARM_SHIFT 1
#define IDLWDT_ARM_SHIFT 0
/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
#define CONF_MOD_UART3_CLK_MODE_R 31
#define CONF_MOD_UART2_CLK_MODE_R 30
#define CONF_MOD_UART1_CLK_MODE_R 29
#define CONF_MOD_MMC_SD_CLK_REQ_R 23
#define CONF_MOD_MCBSP3_AUXON 20
/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
#define CONF_MOD_SOSSI_CLK_EN_R 16
/* Some OTG_SYSCON_2-specific bit fields */
#define OTG_SYSCON_2_UHOST_EN_SHIFT 8
/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
#define SOFT_MMC2_DPLL_REQ_SHIFT 13
#define SOFT_MMC_DPLL_REQ_SHIFT 12
#define SOFT_UART3_DPLL_REQ_SHIFT 11
#define SOFT_UART2_DPLL_REQ_SHIFT 10
#define SOFT_UART1_DPLL_REQ_SHIFT 9
#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8
#define SOFT_CAM_DPLL_REQ_SHIFT 7
#define SOFT_COM_MCKO_REQ_SHIFT 6
#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */
#define USB_REQ_EN_SHIFT 4
#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */
#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */
#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */
#define SOFT_DPLL_REQ_SHIFT 0
/*
* Omap1 clocks
*/
static struct omap1_clk ck_ref = {
.hw.init = CLK_HW_INIT_NO_PARENT("ck_ref", &omap1_clk_rate_ops, 0),
.rate = 12000000,
};
static struct omap1_clk ck_dpll1 = {
.hw.init = CLK_HW_INIT("ck_dpll1", "ck_ref", &omap1_clk_rate_ops,
/*
* force recursive refresh of rates of the clock
* and its children when clk_get_rate() is called
*/
CLK_GET_RATE_NOCACHE),
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ FIX: SoSSI, SSR ]
*/
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
.hw.init = CLK_HW_INIT("ck_dpll1out", "ck_dpll1", &omap1_clk_gate_ops, 0),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_CKOUT_ARM,
},
.idlect_shift = IDL_CLKOUT_ARM_SHIFT,
};
static struct omap1_clk sossi_ck = {
.hw.init = CLK_HW_INIT("ck_sossi", "ck_dpll1out", &omap1_clk_full_ops, 0),
.ops = &clkops_generic,
.flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
.enable_bit = CONF_MOD_SOSSI_CLK_EN_R,
.recalc = &omap1_sossi_recalc,
.round_rate = &omap1_round_sossi_rate,
.set_rate = &omap1_set_sossi_rate,
};
static struct omap1_clk arm_ck = {
.hw.init = CLK_HW_INIT("arm_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk armper_ck = {
.clk = {
.hw.init = CLK_HW_INIT("armper_ck", "ck_dpll1", &omap1_clk_full_ops,
CLK_IS_CRITICAL),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = IDLPER_ARM_SHIFT,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ GPIO code for 1510 ]
*/
static struct omap1_clk arm_gpio_ck = {
.hw.init = CLK_HW_INIT("ick", "ck_dpll1", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
.ops = &clkops_generic,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_GPIOCK,
};
static struct arm_idlect1_clk armxor_ck = {
.clk = {
.hw.init = CLK_HW_INIT("armxor_ck", "ck_ref", &omap1_clk_gate_ops,
CLK_IS_CRITICAL),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_XORPCK,
},
.idlect_shift = IDLXORP_ARM_SHIFT,
};
static struct arm_idlect1_clk armtim_ck = {
.clk = {
.hw.init = CLK_HW_INIT("armtim_ck", "ck_ref", &omap1_clk_gate_ops,
CLK_IS_CRITICAL),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_TIMCK,
},
.idlect_shift = IDLTIM_ARM_SHIFT,
};
static struct arm_idlect1_clk armwdt_ck = {
.clk = {
.hw.init = CLK_HW_INIT("armwdt_ck", "ck_ref", &omap1_clk_full_ops, 0),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_WDTCK,
.fixed_div = 14,
.recalc = &omap_fixed_divisor_recalc,
},
.idlect_shift = IDLWDT_ARM_SHIFT,
};
static struct omap1_clk arminth_ck16xx = {
.hw.init = CLK_HW_INIT("arminth_ck", "arm_ck", &omap1_clk_null_ops, 0),
/* Note: On 16xx the frequency can be divided by 2 by programming
* ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
*
* 1510 version is in TC clocks.
*/
};
static struct omap1_clk dsp_ck = {
.hw.init = CLK_HW_INIT("dsp_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
.ops = &clkops_generic,
.enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
.enable_bit = EN_DSPCK,
.rate_offset = CKCTL_DSPDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct omap1_clk dspmmu_ck = {
.hw.init = CLK_HW_INIT("dspmmu_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct omap1_clk dspper_ck = {
.hw.init = CLK_HW_INIT("dspper_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
.ops = &clkops_dspck,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = &omap1_clk_set_rate_dsp_domain,
};
static struct omap1_clk dspxor_ck = {
.hw.init = CLK_HW_INIT("dspxor_ck", "ck_ref", &omap1_clk_gate_ops, 0),
.ops = &clkops_dspck,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
};
static struct omap1_clk dsptim_ck = {
.hw.init = CLK_HW_INIT("dsptim_ck", "ck_ref", &omap1_clk_gate_ops, 0),
.ops = &clkops_dspck,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
};
static struct arm_idlect1_clk tc_ck = {
.clk = {
.hw.init = CLK_HW_INIT("tc_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
.flags = CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = IDLIF_ARM_SHIFT,
};
static struct omap1_clk arminth_ck1510 = {
.hw.init = CLK_HW_INIT("arminth_ck", "tc_ck", &omap1_clk_null_ops, 0),
/* Note: On 1510 the frequency follows TC_CK
*
* 16xx version is in MPU clocks.
*/
};
static struct omap1_clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.hw.init = CLK_HW_INIT("tipb_ck", "tc_ck", &omap1_clk_null_ops, 0),
};
static struct omap1_clk l3_ocpi_ck = {
/* No-idle controlled by "tc_ck" */
.hw.init = CLK_HW_INIT("l3_ocpi_ck", "tc_ck", &omap1_clk_gate_ops, 0),
.ops = &clkops_generic,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_OCPI_CK,
};
static struct omap1_clk tc1_ck = {
.hw.init = CLK_HW_INIT("tc1_ck", "tc_ck", &omap1_clk_gate_ops, 0),
.ops = &clkops_generic,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC1_CK,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ pm.c (SRAM), CCP, Camera ]
*/
static struct omap1_clk tc2_ck = {
.hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
.ops = &clkops_generic,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC2_CK,
};
static struct omap1_clk dma_ck = {
/* No-idle controlled by "tc_ck" */
.hw.init = CLK_HW_INIT("dma_ck", "tc_ck", &omap1_clk_null_ops, 0),
};
static struct omap1_clk dma_lcdfree_ck = {
.hw.init = CLK_HW_INIT("dma_lcdfree_ck", "tc_ck", &omap1_clk_null_ops, 0),
};
static struct arm_idlect1_clk api_ck = {
.clk = {
.hw.init = CLK_HW_INIT("api_ck", "tc_ck", &omap1_clk_gate_ops, 0),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_APICK,
},
.idlect_shift = IDLAPI_ARM_SHIFT,
};
static struct arm_idlect1_clk lb_ck = {
.clk = {
.hw.init = CLK_HW_INIT("lb_ck", "tc_ck", &omap1_clk_gate_ops, 0),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LBCK,
},
.idlect_shift = IDLLB_ARM_SHIFT,
};
static struct omap1_clk rhea1_ck = {
.hw.init = CLK_HW_INIT("rhea1_ck", "tc_ck", &omap1_clk_null_ops, 0),
};
static struct omap1_clk rhea2_ck = {
.hw.init = CLK_HW_INIT("rhea2_ck", "tc_ck", &omap1_clk_null_ops, 0),
};
static struct omap1_clk lcd_ck_16xx = {
.hw.init = CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
.ops = &clkops_generic,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.hw.init = CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
.ops = &clkops_generic,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT,
};
/*
* XXX The enable_bit here is misused - it simply switches between 12MHz
* and 48MHz. Reimplement with clk_mux.
*
* XXX does this need SYSC register handling?
*/
static struct omap1_clk uart1_1510 = {
/* Direct from ULPD, no real parent */
.hw.init = CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = CONF_MOD_UART1_CLK_MODE_R,
.round_rate = &omap1_round_uart_rate,
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
/*
* XXX The enable_bit here is misused - it simply switches between 12MHz
* and 48MHz. Reimplement with clk_mux.
*
* XXX SYSC register handling does not belong in the clock framework
*/
static struct uart_clk uart1_16xx = {
.clk = {
.ops = &clkops_uart_16xx,
/* Direct from ULPD, no real parent */
.hw.init = CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = CONF_MOD_UART1_CLK_MODE_R,
},
.sysc_addr = 0xfffb0054,
};
/*
* XXX The enable_bit here is misused - it simply switches between 12MHz
* and 48MHz. Reimplement with clk_mux.
*
* XXX does this need SYSC register handling?
*/
static struct omap1_clk uart2_ck = {
/* Direct from ULPD, no real parent */
.hw.init = CLK_HW_INIT("uart2_ck", "armper_ck", &omap1_clk_full_ops, 0),
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = CONF_MOD_UART2_CLK_MODE_R,
.round_rate = &omap1_round_uart_rate,
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
/*
* XXX The enable_bit here is misused - it simply switches between 12MHz
* and 48MHz. Reimplement with clk_mux.
*
* XXX does this need SYSC register handling?
*/
static struct omap1_clk uart3_1510 = {
/* Direct from ULPD, no real parent */
.hw.init = CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = CONF_MOD_UART3_CLK_MODE_R,
.round_rate = &omap1_round_uart_rate,
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
/*
* XXX The enable_bit here is misused - it simply switches between 12MHz
* and 48MHz. Reimplement with clk_mux.
*
* XXX SYSC register handling does not belong in the clock framework
*/
static struct uart_clk uart3_16xx = {
.clk = {
.ops = &clkops_uart_16xx,
/* Direct from ULPD, no real parent */
.hw.init = CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = CONF_MOD_UART3_CLK_MODE_R,
},
.sysc_addr = 0xfffb9854,
};
static struct omap1_clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.hw.init = CLK_HW_INIT_NO_PARENT("usb_clko", &omap1_clk_full_ops, 0),
.rate = 6000000,
.flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
.enable_bit = USB_MCLK_EN_BIT,
};
static struct omap1_clk usb_hhc_ck1510 = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.hw.init = CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
.flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = USB_HOST_HHC_UHOST_EN,
};
static struct omap1_clk usb_hhc_ck16xx = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.hw.init = CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
.flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT
};
static struct omap1_clk usb_dc_ck = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.hw.init = CLK_HW_INIT_NO_PARENT("usb_dc_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT,
};
static struct omap1_clk uart1_7xx = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.hw.init = CLK_HW_INIT_NO_PARENT("uart1_ck", &omap1_clk_full_ops, 0),
.rate = 12000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 9,
};
static struct omap1_clk uart2_7xx = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.hw.init = CLK_HW_INIT_NO_PARENT("uart2_ck", &omap1_clk_full_ops, 0),
.rate = 12000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 11,
};
static struct omap1_clk mclk_1510 = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.hw.init = CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
.rate = 12000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = SOFT_COM_MCKO_REQ_SHIFT,
};
static struct omap1_clk mclk_16xx = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.hw.init = CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
.enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
.enable_bit = COM_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
};
static struct omap1_clk bclk_1510 = {
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.hw.init = CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_rate_ops, 0),
.rate = 12000000,
};
static struct omap1_clk bclk_16xx = {
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.hw.init = CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_full_ops, 0),
.enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
.enable_bit = SWD_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
};
static struct omap1_clk mmc1_ck = {
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.hw.init = CLK_HW_INIT("mmc1_ck", "armper_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R,
};
/*
* XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
* CONF_MOD_MCBSP3_AUXON ??
*/
static struct omap1_clk mmc2_ck = {
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.hw.init = CLK_HW_INIT("mmc2_ck", "armper_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 20,
};
static struct omap1_clk mmc3_ck = {
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.hw.init = CLK_HW_INIT("mmc3_ck", "armper_ck", &omap1_clk_full_ops, 0),
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = SOFT_MMC_DPLL_REQ_SHIFT,
};
static struct omap1_clk virtual_ck_mpu = {
/* Is smarter alias for arm_ck */
.hw.init = CLK_HW_INIT("mpu", "arm_ck", &omap1_clk_rate_ops, 0),
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
.round_rate = &omap1_round_to_table_rate,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
remains active during MPU idle whenever this is enabled */
static struct omap1_clk i2c_fck = {
.hw.init = CLK_HW_INIT("i2c_fck", "armxor_ck", &omap1_clk_gate_ops, 0),
.flags = CLOCK_NO_IDLE_PARENT,
};
static struct omap1_clk i2c_ick = {
.hw.init = CLK_HW_INIT("i2c_ick", "armper_ck", &omap1_clk_gate_ops, 0),
.flags = CLOCK_NO_IDLE_PARENT,
};
/*
* clkdev integration
*/
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "ck_dpll1", &ck_dpll1.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk.hw, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck.hw, CK_16XX),
CLK(NULL, "arm_ck", &arm_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armper_ck", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap_gpio.0", "ick", &arm_gpio_ck.hw, CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "armtim_ck", &armtim_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "fck", &armwdt_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "ick", &armper_ck.clk.hw, CK_16XX),
CLK("omap_wdt", "ick", &dummy_ck.hw, CK_1510 | CK_310),
CLK(NULL, "arminth_ck", &arminth_ck1510.hw, CK_1510 | CK_310),
CLK(NULL, "arminth_ck", &arminth_ck16xx.hw, CK_16XX),
/* CK_GEN2 clocks */
CLK(NULL, "dsp_ck", &dsp_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspmmu_ck", &dspmmu_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspper_ck", &dspper_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspxor_ck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dsptim_ck", &dsptim_ck.hw, CK_16XX | CK_1510 | CK_310),
/* CK_GEN3 clocks */
CLK(NULL, "tc_ck", &tc_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "tipb_ck", &tipb_ck.hw, CK_1510 | CK_310),
CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck.hw, CK_16XX | CK_7XX),
CLK(NULL, "tc1_ck", &tc1_ck.hw, CK_16XX),
CLK(NULL, "tc2_ck", &tc2_ck.hw, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck.hw, CK_16XX),
CLK(NULL, "api_ck", &api_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "lb_ck", &lb_ck.clk.hw, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck.hw, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck.hw, CK_16XX),
CLK(NULL, "lcd_ck", &lcd_ck_16xx.hw, CK_16XX | CK_7XX),
CLK(NULL, "lcd_ck", &lcd_ck_1510.clk.hw, CK_1510 | CK_310),
/* ULPD clocks */
CLK(NULL, "uart1_ck", &uart1_1510.hw, CK_1510 | CK_310),
CLK(NULL, "uart1_ck", &uart1_16xx.clk.hw, CK_16XX),
CLK(NULL, "uart1_ck", &uart1_7xx.hw, CK_7XX),
CLK(NULL, "uart2_ck", &uart2_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "uart2_ck", &uart2_7xx.hw, CK_7XX),
CLK(NULL, "uart3_ck", &uart3_1510.hw, CK_1510 | CK_310),
CLK(NULL, "uart3_ck", &uart3_16xx.clk.hw, CK_16XX),
CLK(NULL, "usb_clko", &usb_clko.hw, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510.hw, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx.hw, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck.hw, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510.hw, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx.hw, CK_16XX),
CLK(NULL, "bclk", &bclk_1510.hw, CK_1510 | CK_310),
CLK(NULL, "bclk", &bclk_16xx.hw, CK_16XX),
CLK("mmci-omap.0", "fck", &mmc1_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK("mmci-omap.0", "fck", &mmc3_ck.hw, CK_7XX),
CLK("mmci-omap.0", "ick", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("mmci-omap.1", "fck", &mmc2_ck.hw, CK_16XX),
CLK("mmci-omap.1", "ick", &armper_ck.clk.hw, CK_16XX),
/* Virtual clocks */
CLK(NULL, "mpu", &virtual_ck_mpu.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap_i2c.1", "fck", &i2c_fck.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("omap_i2c.1", "ick", &i2c_ick.hw, CK_16XX),
CLK("omap_i2c.1", "ick", &dummy_ck.hw, CK_1510 | CK_310 | CK_7XX),
CLK("omap1_spi100k.1", "fck", &dummy_ck.hw, CK_7XX),
CLK("omap1_spi100k.1", "ick", &dummy_ck.hw, CK_7XX),
CLK("omap1_spi100k.2", "fck", &dummy_ck.hw, CK_7XX),
CLK("omap1_spi100k.2", "ick", &dummy_ck.hw, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck.hw, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck.hw, CK_1510 | CK_310),
CLK("omap-mcbsp.2", "ick", &armper_ck.clk.hw, CK_16XX),
CLK("omap-mcbsp.2", "ick", &dummy_ck.hw, CK_1510 | CK_310),
CLK("omap-mcbsp.3", "ick", &dspper_ck.hw, CK_16XX),
CLK("omap-mcbsp.3", "ick", &dummy_ck.hw, CK_1510 | CK_310),
CLK("omap-mcbsp.1", "fck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.2", "fck", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.3", "fck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310),
};
/*
* init
*/
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
u32 cpu_mask;
int __init omap1_clk_init(void)
{
struct omap_clk *c;
u32 reg;
#ifdef CONFIG_DEBUG_LL
/* Make sure UART clocks are enabled early */
if (cpu_is_omap16xx())
omap_writel(omap_readl(MOD_CONF_CTRL_0) |
CONF_MOD_UART1_CLK_MODE_R |
CONF_MOD_UART3_CLK_MODE_R, MOD_CONF_CTRL_0);
#endif
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
cpu_mask = 0;
if (cpu_is_omap1710())
cpu_mask |= CK_1710;
if (cpu_is_omap16xx())
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
cpu_mask |= CK_1510;
if (cpu_is_omap310())
cpu_mask |= CK_310;
/* Pointers to these clocks are needed by code in clock.c */
api_ck_p = &api_ck.clk;
ck_dpll1_p = &ck_dpll1;
ck_ref_p = &ck_ref;
pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in synchronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
/*
* Initially use the values set by bootloader. Determine PLL rate and
* recalculate dependent clocks as if kernel had changed PLL or
* divisors. See also omap1_clk_late_init() that can reprogram dpll1
* after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
if (pll_ctl_val & 0x10) {
/* PLL enabled, apply multiplier and divisor */
if (pll_ctl_val & 0xf80)
ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
} else {
/* PLL disabled, apply bypass divisor */
switch (pll_ctl_val & 0xc) {
case 0:
break;
case 0x4:
ck_dpll1.rate /= 2;
break;
default:
ck_dpll1.rate /= 4;
break;
}
}
}
/* Amstrad Delta wants BCLK high when inactive */
if (machine_is_ams_delta())
omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
(1 << SDW_MCLK_INV_BIT),
ULPD_CLOCK_CTRL);
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
/* Put DSP/MPUI into reset until needed */
omap_writew(0, ARM_RSTCT1);
omap_writew(1, ARM_RSTCT2);
omap_writew(0x400, ARM_IDLECT1);
/*
* According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
* of the ARM_IDLECT2 register must be set to zero. The power-on
* default value of this bit is one.
*/
omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) {
if (!(c->cpu & cpu_mask))
continue;
if (c->lk.clk_hw->init) { /* NULL if provider already registered */
const struct clk_init_data *init = c->lk.clk_hw->init;
const char *name = c->lk.clk_hw->init->name;
int err;
err = clk_hw_register(NULL, c->lk.clk_hw);
if (err < 0) {
pr_err("failed to register clock \"%s\"! (%d)\n", name, err);
/* may be tried again, restore init data */
c->lk.clk_hw->init = init;
continue;
}
}
clk_hw_register_clkdev(c->lk.clk_hw, c->lk.con_id, c->lk.dev_id);
}
omap1_show_rates();
return 0;
}
#define OMAP1_DPLL1_SANE_VALUE 60000000
void __init omap1_clk_late_init(void)
{
unsigned long rate = ck_dpll1.rate;
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0, arm_ck.rate)) {
pr_err("System frequencies not set, using default. Check your config.\n");
/*
* Reprogramming the DPLL is tricky, it must be done from SRAM.
*/
omap_sram_reprogram_clock(0x2290, 0x0005);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
omap1_show_rates();
loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
}