blob: 3ab7050b1b6b04fe7ec7a7570c55d62ef0590ef9 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
* are different.
*/
#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
#define __ASM_ARCH_OMAP15XX_IRQS_H
/*
* IRQ numbers for interrupt handler 1
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*
*/
#define INT_CAMERA (NR_IRQS_LEGACY + 1)
#define INT_FIQ (NR_IRQS_LEGACY + 3)
#define INT_RTDX (NR_IRQS_LEGACY + 6)
#define INT_DSP_MMU_ABORT (NR_IRQS_LEGACY + 7)
#define INT_HOST (NR_IRQS_LEGACY + 8)
#define INT_ABORT (NR_IRQS_LEGACY + 9)
#define INT_BRIDGE_PRIV (NR_IRQS_LEGACY + 13)
#define INT_GPIO_BANK1 (NR_IRQS_LEGACY + 14)
#define INT_UART3 (NR_IRQS_LEGACY + 15)
#define INT_TIMER3 (NR_IRQS_LEGACY + 16)
#define INT_DMA_CH0_6 (NR_IRQS_LEGACY + 19)
#define INT_DMA_CH1_7 (NR_IRQS_LEGACY + 20)
#define INT_DMA_CH2_8 (NR_IRQS_LEGACY + 21)
#define INT_DMA_CH3 (NR_IRQS_LEGACY + 22)
#define INT_DMA_CH4 (NR_IRQS_LEGACY + 23)
#define INT_DMA_CH5 (NR_IRQS_LEGACY + 24)
#define INT_TIMER1 (NR_IRQS_LEGACY + 26)
#define INT_WD_TIMER (NR_IRQS_LEGACY + 27)
#define INT_BRIDGE_PUB (NR_IRQS_LEGACY + 28)
#define INT_TIMER2 (NR_IRQS_LEGACY + 30)
#define INT_LCD_CTRL (NR_IRQS_LEGACY + 31)
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 1
*/
#define INT_1510_IH2_IRQ (NR_IRQS_LEGACY + 0)
#define INT_1510_RES2 (NR_IRQS_LEGACY + 2)
#define INT_1510_SPI_TX (NR_IRQS_LEGACY + 4)
#define INT_1510_SPI_RX (NR_IRQS_LEGACY + 5)
#define INT_1510_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
#define INT_1510_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
#define INT_1510_RES12 (NR_IRQS_LEGACY + 12)
#define INT_1510_LB_MMU (NR_IRQS_LEGACY + 17)
#define INT_1510_RES18 (NR_IRQS_LEGACY + 18)
#define INT_1510_LOCAL_BUS (NR_IRQS_LEGACY + 29)
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
#define INT_1610_IH2_FIQ (NR_IRQS_LEGACY + 2)
#define INT_1610_McBSP2_TX (NR_IRQS_LEGACY + 4)
#define INT_1610_McBSP2_RX (NR_IRQS_LEGACY + 5)
#define INT_1610_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
#define INT_1610_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
#define INT_1610_LCD_LINE (NR_IRQS_LEGACY + 12)
#define INT_1610_GPTIMER1 (NR_IRQS_LEGACY + 17)
#define INT_1610_GPTIMER2 (NR_IRQS_LEGACY + 18)
#define INT_1610_SSR_FIFO_0 (NR_IRQS_LEGACY + 29)
/*
* OMAP-7xx specific IRQ numbers for interrupt handler 1
*/
#define INT_7XX_IH2_FIQ (NR_IRQS_LEGACY + 0)
#define INT_7XX_IH2_IRQ (NR_IRQS_LEGACY + 1)
#define INT_7XX_USB_NON_ISO (NR_IRQS_LEGACY + 2)
#define INT_7XX_USB_ISO (NR_IRQS_LEGACY + 3)
#define INT_7XX_ICR (NR_IRQS_LEGACY + 4)
#define INT_7XX_EAC (NR_IRQS_LEGACY + 5)
#define INT_7XX_GPIO_BANK1 (NR_IRQS_LEGACY + 6)
#define INT_7XX_GPIO_BANK2 (NR_IRQS_LEGACY + 7)
#define INT_7XX_GPIO_BANK3 (NR_IRQS_LEGACY + 8)
#define INT_7XX_McBSP2TX (NR_IRQS_LEGACY + 10)
#define INT_7XX_McBSP2RX (NR_IRQS_LEGACY + 11)
#define INT_7XX_McBSP2RX_OVF (NR_IRQS_LEGACY + 12)
#define INT_7XX_LCD_LINE (NR_IRQS_LEGACY + 14)
#define INT_7XX_GSM_PROTECT (NR_IRQS_LEGACY + 15)
#define INT_7XX_TIMER3 (NR_IRQS_LEGACY + 16)
#define INT_7XX_GPIO_BANK5 (NR_IRQS_LEGACY + 17)
#define INT_7XX_GPIO_BANK6 (NR_IRQS_LEGACY + 18)
#define INT_7XX_SPGIO_WR (NR_IRQS_LEGACY + 29)
/*
* IRQ numbers for interrupt handler 2
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*/
#define IH2_BASE (NR_IRQS_LEGACY + 32)
#define INT_KEYBOARD (1 + IH2_BASE)
#define INT_uWireTX (2 + IH2_BASE)
#define INT_uWireRX (3 + IH2_BASE)
#define INT_I2C (4 + IH2_BASE)
#define INT_MPUIO (5 + IH2_BASE)
#define INT_USB_HHC_1 (6 + IH2_BASE)
#define INT_McBSP3TX (10 + IH2_BASE)
#define INT_McBSP3RX (11 + IH2_BASE)
#define INT_McBSP1TX (12 + IH2_BASE)
#define INT_McBSP1RX (13 + IH2_BASE)
#define INT_UART1 (14 + IH2_BASE)
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
#define INT_MMC (23 + IH2_BASE)
#define INT_GAUGE_32K (24 + IH2_BASE)
#define INT_RTC_TIMER (25 + IH2_BASE)
#define INT_RTC_ALARM (26 + IH2_BASE)
#define INT_MEM_STICK (27 + IH2_BASE)
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 2
*/
#define INT_1510_DSP_MMU (28 + IH2_BASE)
#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 2
*/
#define INT_1610_FAC (0 + IH2_BASE)
#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
#define INT_1610_USB_OTG (8 + IH2_BASE)
#define INT_1610_SoSSI (9 + IH2_BASE)
#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
#define INT_1610_DSP_MMU (28 + IH2_BASE)
#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
#define INT_1610_STI (32 + IH2_BASE)
#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
#define INT_1610_GPTIMER3 (34 + IH2_BASE)
#define INT_1610_GPTIMER4 (35 + IH2_BASE)
#define INT_1610_GPTIMER5 (36 + IH2_BASE)
#define INT_1610_GPTIMER6 (37 + IH2_BASE)
#define INT_1610_GPTIMER7 (38 + IH2_BASE)
#define INT_1610_GPTIMER8 (39 + IH2_BASE)
#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
#define INT_1610_MMC2 (42 + IH2_BASE)
#define INT_1610_CF (43 + IH2_BASE)
#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
#define INT_1610_SPI (49 + IH2_BASE)
#define INT_1610_DMA_CH6 (53 + IH2_BASE)
#define INT_1610_DMA_CH7 (54 + IH2_BASE)
#define INT_1610_DMA_CH8 (55 + IH2_BASE)
#define INT_1610_DMA_CH9 (56 + IH2_BASE)
#define INT_1610_DMA_CH10 (57 + IH2_BASE)
#define INT_1610_DMA_CH11 (58 + IH2_BASE)
#define INT_1610_DMA_CH12 (59 + IH2_BASE)
#define INT_1610_DMA_CH13 (60 + IH2_BASE)
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-7xx specific IRQ numbers for interrupt handler 2
*/
#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
#define INT_7XX_CFCD (2 + IH2_BASE)
#define INT_7XX_CFIREQ (3 + IH2_BASE)
#define INT_7XX_I2C (4 + IH2_BASE)
#define INT_7XX_PCC (5 + IH2_BASE)
#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
#define INT_7XX_VLYNQ (9 + IH2_BASE)
#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
#define INT_7XX_McBSP1TX (11 + IH2_BASE)
#define INT_7XX_McBSP1RX (12 + IH2_BASE)
#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
#define INT_7XX_MCSI (16 + IH2_BASE)
#define INT_7XX_uWireTX (17 + IH2_BASE)
#define INT_7XX_uWireRX (18 + IH2_BASE)
#define INT_7XX_SMC_CD (19 + IH2_BASE)
#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
#define INT_7XX_TIMER32K (22 + IH2_BASE)
#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
#define INT_7XX_UPLD (24 + IH2_BASE)
#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
#define INT_7XX_USB_GENI (29 + IH2_BASE)
#define INT_7XX_USB_OTG (30 + IH2_BASE)
#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
#define INT_7XX_RNG (32 + IH2_BASE)
#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
#define INT_7XX_MPUIO (39 + IH2_BASE)
#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
#define INT_7XX_NAND (63 + IH2_BASE)
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
#define OMAP_IRQ_BIT(irq) (1 << ((irq - NR_IRQS_LEGACY) % 32))
#ifdef CONFIG_FIQ
#define FIQ_START 1024
#endif
#endif