| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2023, Linaro Limited |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| |
| #include "sa8775p.dtsi" |
| #include "sa8775p-pmics.dtsi" |
| |
| / { |
| model = "Qualcomm SA8775P Ride"; |
| compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; |
| |
| aliases { |
| serial0 = &uart10; |
| serial1 = &uart12; |
| serial2 = &uart17; |
| i2c18 = &i2c18; |
| spi16 = &spi16; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pmm8654au-rpmh-regulators"; |
| qcom,pmic-id = "a"; |
| |
| vreg_s4a: smps4 { |
| regulator-name = "vreg_s4a"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1816000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s5a: smps5 { |
| regulator-name = "vreg_s5a"; |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <1996000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s9a: smps9 { |
| regulator-name = "vreg_s9a"; |
| regulator-min-microvolt = <535000>; |
| regulator-max-microvolt = <1120000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4a: ldo4 { |
| regulator-name = "vreg_l4a"; |
| regulator-min-microvolt = <788000>; |
| regulator-max-microvolt = <1050000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5a: ldo5 { |
| regulator-name = "vreg_l5a"; |
| regulator-min-microvolt = <870000>; |
| regulator-max-microvolt = <950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6a: ldo6 { |
| regulator-name = "vreg_l6a"; |
| regulator-min-microvolt = <870000>; |
| regulator-max-microvolt = <970000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7a: ldo7 { |
| regulator-name = "vreg_l7a"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8a: ldo8 { |
| regulator-name = "vreg_l8a"; |
| regulator-min-microvolt = <2504000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9a: ldo9 { |
| regulator-name = "vreg_l9a"; |
| regulator-min-microvolt = <2970000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pmm8654au-rpmh-regulators"; |
| qcom,pmic-id = "c"; |
| |
| vreg_l1c: ldo1 { |
| regulator-name = "vreg_l1c"; |
| regulator-min-microvolt = <1140000>; |
| regulator-max-microvolt = <1260000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2c: ldo2 { |
| regulator-name = "vreg_l2c"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3c: ldo3 { |
| regulator-name = "vreg_l3c"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4c: ldo4 { |
| regulator-name = "vreg_l4c"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| /* |
| * FIXME: This should have regulator-allow-set-load but |
| * we're getting an over-current fault from the PMIC |
| * when switching to LPM. |
| */ |
| }; |
| |
| vreg_l5c: ldo5 { |
| regulator-name = "vreg_l5c"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6c: ldo6 { |
| regulator-name = "vreg_l6c"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7c: ldo7 { |
| regulator-name = "vreg_l7c"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8c: ldo8 { |
| regulator-name = "vreg_l8c"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9c: ldo9 { |
| regulator-name = "vreg_l9c"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <2700000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-2 { |
| compatible = "qcom,pmm8654au-rpmh-regulators"; |
| qcom,pmic-id = "e"; |
| |
| vreg_s4e: smps4 { |
| regulator-name = "vreg_s4e"; |
| regulator-min-microvolt = <970000>; |
| regulator-max-microvolt = <1520000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s7e: smps7 { |
| regulator-name = "vreg_s7e"; |
| regulator-min-microvolt = <1010000>; |
| regulator-max-microvolt = <1170000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s9e: smps9 { |
| regulator-name = "vreg_s9e"; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <570000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6e: ldo6 { |
| regulator-name = "vreg_l6e"; |
| regulator-min-microvolt = <1280000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8e: ldo8 { |
| regulator-name = "vreg_l8e"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| }; |
| |
| &i2c18 { |
| clock-frequency = <400000>; |
| pinctrl-0 = <&qup_i2c18_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &pmm8654au_0_gpios { |
| gpio-line-names = "DS_EN", |
| "POFF_COMPLETE", |
| "UFS0_VER_ID", |
| "FAST_POFF", |
| "DBU1_PON_DONE", |
| "AOSS_SLEEP", |
| "CAM_DES0_EN", |
| "CAM_DES1_EN", |
| "CAM_DES2_EN", |
| "CAM_DES3_EN", |
| "UEFI", |
| "ANALOG_PON_OPT"; |
| }; |
| |
| &pmm8654au_1_gpios { |
| gpio-line-names = "PMIC_C_ID0", |
| "PMIC_C_ID1", |
| "UFS1_VER_ID", |
| "IPA_PWR", |
| "", |
| "WLAN_DBU4_EN", |
| "WLAN_EN", |
| "BT_EN", |
| "USB2_PWR_EN", |
| "USB2_FAULT"; |
| }; |
| |
| &pmm8654au_2_gpios { |
| gpio-line-names = "PMIC_E_ID0", |
| "PMIC_E_ID1", |
| "USB0_PWR_EN", |
| "USB0_FAULT", |
| "SENSOR_IRQ_1", |
| "SENSOR_IRQ_2", |
| "SENSOR_RST", |
| "SGMIIO0_RST", |
| "SGMIIO1_RST", |
| "USB1_PWR_ENABLE", |
| "USB1_FAULT", |
| "VMON_SPX8"; |
| }; |
| |
| &pmm8654au_3_gpios { |
| gpio-line-names = "PMIC_G_ID0", |
| "PMIC_G_ID1", |
| "GNSS_RST", |
| "GNSS_EN", |
| "GNSS_BOOT_MODE"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_2 { |
| status = "okay"; |
| }; |
| |
| &sleep_clk { |
| clock-frequency = <32764>; |
| }; |
| |
| &spi16 { |
| pinctrl-0 = <&qup_spi16_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| qup_uart10_default: qup-uart10-state { |
| pins = "gpio46", "gpio47"; |
| function = "qup1_se3"; |
| }; |
| |
| qup_spi16_default: qup-spi16-state { |
| pins = "gpio86", "gpio87", "gpio88", "gpio89"; |
| function = "qup2_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_i2c18_default: qup-i2c18-state { |
| pins = "gpio95", "gpio96"; |
| function = "qup2_se4"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_uart12_default: qup-uart12-state { |
| qup_uart12_cts: qup-uart12-cts-pins { |
| pins = "gpio52"; |
| function = "qup1_se5"; |
| bias-disable; |
| }; |
| |
| qup_uart12_rts: qup-uart12-rts-pins { |
| pins = "gpio53"; |
| function = "qup1_se5"; |
| bias-pull-down; |
| }; |
| |
| qup_uart12_tx: qup-uart12-tx-pins { |
| pins = "gpio54"; |
| function = "qup1_se5"; |
| bias-pull-up; |
| }; |
| |
| qup_uart12_rx: qup-uart12-rx-pins { |
| pins = "gpio55"; |
| function = "qup1_se5"; |
| bias-pull-down; |
| }; |
| }; |
| |
| qup_uart17_default: qup-uart17-state { |
| qup_uart17_cts: qup-uart17-cts-pins { |
| pins = "gpio91"; |
| function = "qup2_se3"; |
| bias-disable; |
| }; |
| |
| qup_uart17_rts: qup0-uart17-rts-pins { |
| pins = "gpio92"; |
| function = "qup2_se3"; |
| bias-pull-down; |
| }; |
| |
| qup_uart17_tx: qup0-uart17-tx-pins { |
| pins = "gpio93"; |
| function = "qup2_se3"; |
| bias-pull-up; |
| }; |
| |
| qup_uart17_rx: qup0-uart17-rx-pins { |
| pins = "gpio94"; |
| function = "qup2_se3"; |
| bias-pull-down; |
| }; |
| }; |
| }; |
| |
| &uart10 { |
| compatible = "qcom,geni-debug-uart"; |
| pinctrl-0 = <&qup_uart10_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart12 { |
| pinctrl-0 = <&qup_uart12_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart17 { |
| pinctrl-0 = <&qup_uart17_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &xo_board_clk { |
| clock-frequency = <38400000>; |
| }; |
