blob: 47e2430991ca0e6b64d56f31da777a2aa78a0c6b [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
/delete-node/ &cdsp_mem;
/delete-node/ &gpu_mem;
/delete-node/ &ipa_fw_mem;
/delete-node/ &ipa_gsi_mem;
/delete-node/ &mpss_mem;
/delete-node/ &slpi_mem;
/delete-node/ &spss_mem;
/delete-node/ &venus_mem;
/ {
qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
qcom,board-id = <8 0>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer: framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0 0x9c000000 0 0x2300000>;
/* Griffin BL initializes in 2.5k mode, not 4k */
width = <1096>;
height = <2560>;
stride = <(1096 * 4)>;
format = "a8r8g8b8";
/*
* That's (going to be) a lot of clocks, but it's necessary due
* to unused clk cleanup & no panel driver yet (& no dispcc either)..
*/
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
key-camera-focus {
label = "Camera Focus";
linux,code = <KEY_CAMERA_FOCUS>;
gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-camera-snapshot {
label = "Camera Snapshot";
linux,code = <KEY_CAMERA>;
gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
/*
* Apparently RPMh does not provide support for PM8150 S4 because it
* is always-on; model it as a fixed regulator.
*/
vreg_s4a_1p8: pm8150-s4 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
reserved-memory {
mpss_mem: memory@8dc00000 {
reg = <0x0 0x8dc00000 0x0 0x9600000>;
no-map;
};
venus_mem: memory@97200000 {
reg = <0x0 0x97200000 0x0 0x500000>;
no-map;
};
slpi_mem: memory@97700000 {
reg = <0x0 0x97700000 0x0 0x1400000>;
no-map;
};
ipa_fw_mem: memory@98b00000 {
reg = <0x0 0x98b00000 0x0 0x10000>;
no-map;
};
ipa_gsi_mem: memory@98b10000 {
reg = <0x0 0x98b10000 0x0 0x5000>;
no-map;
};
gpu_mem: memory@98b15000 {
reg = <0x0 0x98b15000 0x0 0x2000>;
no-map;
};
spss_mem: memory@98c00000 {
reg = <0x0 0x98c00000 0x0 0x100000>;
no-map;
};
cdsp_mem: memory@98d00000 {
reg = <0x0 0x98d00000 0x0 0x1400000>;
no-map;
};
cont_splash_mem: memory@9c000000 {
reg = <0x0 0x9c000000 0x0 0x2400000>;
no-map;
};
cdsp_sec_mem: memory@a4c00000 {
reg = <0x0 0xa4c00000 0x0 0x3c00000>;
no-map;
};
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc00000 0x0 0x100000>;
record-size = <0x1000>;
console-size = <0x40000>;
msg-size = <0x20000 0x20000>;
ecc-size = <16>;
no-map;
};
};
};
&adsp_mem {
reg = <0x0 0x8be00000 0x0 0x1e00000>;
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
vdd-l2-l10-supply = <&vreg_bob>;
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
vdd-l6-l9-supply = <&vreg_s8c_1p3>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
vdd-l13-l16-l17-supply = <&vreg_bob>;
vreg_s2a_0p6: smps2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <600000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5a_1p9: smps5 {
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2040000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6a_0p9: smps6 {
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1a_0p75: ldo1 {
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <752000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2a_3p1: ldo2 {
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_0p8: ldo3 {
regulator-min-microvolt = <480000>;
regulator-max-microvolt = <932000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a_0p875: ldo5 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a_1p2: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a_1p2: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_2p5: ldo10 {
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L13 is unused. */
vreg_l14a_1p8: ldo14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p7: ldo15 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_3p0: ldo17 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_0p8: ldo18 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
vdd-l2-l3-supply = <&vreg_s8c_1p3>;
vdd-l4-l5-l6-supply = <&vreg_bob>;
vdd-l7-l11-supply = <&vreg_bob>;
vdd-l9-l10-supply = <&vreg_bob>;
vdd-bob-supply = <&vph_pwr>;
vdd-flash-supply = <&vreg_bob>;
vdd-rgb-supply = <&vreg_bob>;
vreg_bob: bob {
regulator-min-microvolt = <3350000>;
regulator-max-microvolt = <4000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
regulator-allow-bypass;
};
vreg_s1c_1p1: smps1 {
regulator-min-microvolt = <1128000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s8c_1p3: smps8 {
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p8: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p3: ldo2 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p2: ldo3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p8: ldo4 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p8: ldo5 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p9: ldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p3: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
/* PM8009 is not present on these boards, even if downstream sources suggest so. */
};
&i2c4 {
status = "okay";
/* Qcom SMB1355 @ c */
/* Qcom SMB1390 @ 10 */
/* Qcom FSA4480 USB-C audio switch @ 43 */
nfc@28 {
compatible = "nxp,nxp-nci-i2c";
reg = <0x28>;
interrupt-parent = <&tlmm>;
interrupts = <47 IRQ_TYPE_EDGE_RISING>;
enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
};
};
&i2c7 {
status = "okay";
/* AMS TCS3490 RGB+IR color sensor @ 72 */
};
&i2c10 {
status = "okay";
/* Samsung touchscreen @ 48 */
};
&pm8150_gpios {
vol_down_n: vol-down-n-state {
pins = "gpio1";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pm8150b_gpios {
snapshot_n: snapshot-n-state {
pins = "gpio1";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
focus_n: focus-n-state {
pins = "gpio2";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEUP>;
status = "okay";
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <126 4>;
};
&uart2 {
status = "okay";
};
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5a_0p875>;
vdda33-supply = <&vreg_l2a_3p1>;
vdda18-supply = <&vreg_l12a_1p8>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vreg_l18a_0p8>;
};