blob: d38b066fc931bc31758ee12d3c3800b6154d0641 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
config LOONGARCH
bool
default y
select ACPI
select ACPI_GENERIC_GSI if ACPI
select ACPI_MCFG if ACPI
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_BINFMT_ELF_STATE
select ARCH_ENABLE_MEMORY_HOTPLUG
select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_INLINE_READ_LOCK if !PREEMPTION
select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
select ARCH_KEEP_MEMBLOCK
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_SPARSEMEM_ENABLE
select ARCH_STACKWALK
select ARCH_SUPPORTS_ACPI
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_HUGETLBFS
select ARCH_SUPPORTS_NUMA_BALANCING
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_USE_QUEUED_RWLOCKS
select ARCH_USE_QUEUED_SPINLOCKS
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANT_OPTIMIZE_VMEMMAP
select ARCH_WANTS_NO_INSTR
select BUILDTIME_TABLE_SORT
select COMMON_CLK
select CPU_PM
select EFI
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_ENTRY
select GENERIC_GETTIMEOFDAY
select GENERIC_IOREMAP if !ARCH_IOREMAP
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_CMPDI2
select GENERIC_LIB_LSHRDI3
select GENERIC_LIB_UCMPDI2
select GENERIC_LIB_DEVMEM_IS_ALLOWED
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL
select GPIOLIB
select HAS_IOPORT
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_ASM_MODVERSIONS
select HAVE_CONTEXT_TRACKING_USER
select HAVE_C_RECORDMCOUNT
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_ARGS
select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_EBPF_JIT
select HAVE_EFFICIENT_UNALIGNED_ACCESS if !ARCH_STRICT_ALIGN
select HAVE_EXIT_THREAD
select HAVE_FAST_GUP
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_ARG_ACCESS_API
select HAVE_FUNCTION_ERROR_INJECTION
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_GENERIC_VDSO
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KPROBES
select HAVE_KPROBES_ON_FTRACE
select HAVE_KRETPROBES
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
select HAVE_SAMPLE_FTRACE_DIRECT
select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
select HAVE_SETUP_PER_CPU_AREA if NUMA
select HAVE_STACKPROTECTOR
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_TIF_NOHZ
select HAVE_VIRT_CPU_ACCOUNTING_GEN if !SMP
select IRQ_FORCED_THREADING
select IRQ_LOONGARCH_CPU
select MMU_GATHER_MERGE_VMAS if MMU
select MODULES_USE_ELF_RELA if MODULES
select NEED_PER_CPU_EMBED_FIRST_CHUNK
select NEED_PER_CPU_PAGE_FIRST_CHUNK
select OF
select OF_EARLY_FLATTREE
select PCI
select PCI_DOMAINS_GENERIC
select PCI_ECAM if ACPI
select PCI_LOONGSON
select PCI_MSI_ARCH_FALLBACKS
select PCI_QUIRKS
select PERF_USE_VMALLOC
select RTC_LIB
select SMP
select SPARSE_IRQ
select SYSCTL_ARCH_UNALIGN_ALLOW
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_EXCEPTION_TRACE
select SWIOTLB
select TRACE_IRQFLAGS_SUPPORT
select USE_PERCPU_NUMA_NODE_ID
select USER_STACKTRACE_SUPPORT
select ZONE_DMA32
config 32BIT
bool
config 64BIT
def_bool y
config CPU_HAS_FPU
bool
default y
config CPU_HAS_PREFETCH
bool
default y
config GENERIC_BUG
def_bool y
depends on BUG
config GENERIC_BUG_RELATIVE_POINTERS
def_bool y
depends on GENERIC_BUG
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_CSUM
def_bool y
config GENERIC_HWEIGHT
def_bool y
config L1_CACHE_SHIFT
int
default "6"
config LOCKDEP_SUPPORT
bool
default y
config STACKTRACE_SUPPORT
bool
default y
# MACH_LOONGSON32 and MACH_LOONGSON64 are deliberately carried over from the
# MIPS Loongson code, to preserve Loongson-specific code paths in drivers that
# are shared between architectures, and specifically expecting the symbols.
config MACH_LOONGSON32
def_bool 32BIT
config MACH_LOONGSON64
def_bool 64BIT
config FIX_EARLYCON_MEM
def_bool y
config PAGE_SIZE_4KB
bool
config PAGE_SIZE_16KB
bool
config PAGE_SIZE_64KB
bool
config PGTABLE_2LEVEL
bool
config PGTABLE_3LEVEL
bool
config PGTABLE_4LEVEL
bool
config PGTABLE_LEVELS
int
default 2 if PGTABLE_2LEVEL
default 3 if PGTABLE_3LEVEL
default 4 if PGTABLE_4LEVEL
config SCHED_OMIT_FRAME_POINTER
bool
default y
config AS_HAS_EXPLICIT_RELOCS
def_bool $(as-instr,x:pcalau12i \$t0$(comma)%pc_hi20(x))
menu "Kernel type and options"
source "kernel/Kconfig.hz"
choice
prompt "Page Table Layout"
default 16KB_2LEVEL if 32BIT
default 16KB_3LEVEL if 64BIT
help
Allows choosing the page table layout, which is a combination
of page size and page table levels. The size of virtual memory
address space are determined by the page table layout.
config 4KB_3LEVEL
bool "4KB with 3 levels"
select PAGE_SIZE_4KB
select PGTABLE_3LEVEL
help
This option selects 4KB page size with 3 level page tables, which
support a maximum of 39 bits of application virtual memory.
config 4KB_4LEVEL
bool "4KB with 4 levels"
select PAGE_SIZE_4KB
select PGTABLE_4LEVEL
help
This option selects 4KB page size with 4 level page tables, which
support a maximum of 48 bits of application virtual memory.
config 16KB_2LEVEL
bool "16KB with 2 levels"
select PAGE_SIZE_16KB
select PGTABLE_2LEVEL
help
This option selects 16KB page size with 2 level page tables, which
support a maximum of 36 bits of application virtual memory.
config 16KB_3LEVEL
bool "16KB with 3 levels"
select PAGE_SIZE_16KB
select PGTABLE_3LEVEL
help
This option selects 16KB page size with 3 level page tables, which
support a maximum of 47 bits of application virtual memory.
config 64KB_2LEVEL
bool "64KB with 2 levels"
select PAGE_SIZE_64KB
select PGTABLE_2LEVEL
help
This option selects 64KB page size with 2 level page tables, which
support a maximum of 42 bits of application virtual memory.
config 64KB_3LEVEL
bool "64KB with 3 levels"
select PAGE_SIZE_64KB
select PGTABLE_3LEVEL
help
This option selects 64KB page size with 3 level page tables, which
support a maximum of 55 bits of application virtual memory.
endchoice
config CMDLINE
string "Built-in kernel command line"
help
For most platforms, the arguments for the kernel's command line
are provided at run-time, during boot. However, there are cases
where either no arguments are being provided or the provided
arguments are insufficient or even invalid.
When that occurs, it is possible to define a built-in command
line here and choose how the kernel should use it later on.
choice
prompt "Kernel command line type"
default CMDLINE_BOOTLOADER
help
Choose how the kernel will handle the provided built-in command
line.
config CMDLINE_BOOTLOADER
bool "Use bootloader kernel arguments if available"
help
Prefer the command-line passed by the boot loader if available.
Use the built-in command line as fallback in case we get nothing
during boot. This is the default behaviour.
config CMDLINE_EXTEND
bool "Use built-in to extend bootloader kernel arguments"
help
The command-line arguments provided during boot will be
appended to the built-in command line. This is useful in
cases where the provided arguments are insufficient and
you don't want to or cannot modify them.
config CMDLINE_FORCE
bool "Always use the built-in kernel command string"
help
Always use the built-in command line, even if we get one during
boot. This is useful in case you need to override the provided
command line on systems where you don't have or want control
over it.
endchoice
config DMI
bool "Enable DMI scanning"
select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
default y
help
This enables SMBIOS/DMI feature for systems, and scanning of
DMI to identify machine quirks.
config EFI
bool "EFI runtime service support"
select UCS2_STRING
select EFI_RUNTIME_WRAPPERS
help
This enables the kernel to use EFI runtime services that are
available (such as the EFI variable services).
config EFI_STUB
bool "EFI boot stub support"
default y
depends on EFI
select EFI_GENERIC_STUB
help
This kernel feature allows the kernel to be loaded directly by
EFI firmware without the use of a bootloader.
config SMP
bool "Multi-Processing support"
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y.
If you say N here, the kernel will run on uni- and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
uniprocessor machines. On a uniprocessor machine, the kernel
will run faster if you say N here.
See also the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
select GENERIC_IRQ_MIGRATION
help
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
(Note: power management support will enable this option
automatically on SMP systems. )
Say N if you want to disable CPU hotplug.
config NR_CPUS
int "Maximum number of CPUs (2-256)"
range 2 256
depends on SMP
default "64"
help
This allows you to specify the maximum number of CPUs which this
kernel will support.
config NUMA
bool "NUMA Support"
select SMP
select ACPI_NUMA if ACPI
help
Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
support. This option improves performance on systems with more
than one NUMA node; on single node systems it is generally better
to leave it disabled.
config NODES_SHIFT
int
default "6"
depends on NUMA
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
default "13" if PAGE_SIZE_64KB
default "11" if PAGE_SIZE_16KB
default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
increase this value.
The page size is not necessarily 4KB. Keep this in mind
when choosing a value for this option.
config ARCH_IOREMAP
bool "Enable LoongArch DMW-based ioremap()"
help
We use generic TLB-based ioremap() by default since it has page
protection support. However, you can enable LoongArch DMW-based
ioremap() for better performance.
config ARCH_WRITECOMBINE
bool "Enable WriteCombine (WUC) for ioremap()"
help
LoongArch maintains cache coherency in hardware, but when paired
with LS7A chipsets the WUC attribute (Weak-ordered UnCached, which
is similar to WriteCombine) is out of the scope of cache coherency
machanism for PCIe devices (this is a PCIe protocol violation, which
may be fixed in newer chipsets).
This means WUC can only used for write-only memory regions now, so
this option is disabled by default, making WUC silently fallback to
SUC for ioremap(). You can enable this option if the kernel is ensured
to run on hardware without this bug.
You can override this setting via writecombine=on/off boot parameter.
config ARCH_STRICT_ALIGN
bool "Enable -mstrict-align to prevent unaligned accesses" if EXPERT
default y
help
Not all LoongArch cores support h/w unaligned access, we can use
-mstrict-align build parameter to prevent unaligned accesses.
CPUs with h/w unaligned access support:
Loongson-2K2000/2K3000/3A5000/3C5000/3D5000.
CPUs without h/w unaligned access support:
Loongson-2K500/2K1000.
This option is enabled by default to make the kernel be able to run
on all LoongArch systems. But you can disable it manually if you want
to run kernel only on systems with h/w unaligned access support in
order to optimise for performance.
config KEXEC
bool "Kexec system call"
select KEXEC_CORE
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similarity to the exec system call.
config CRASH_DUMP
bool "Build kdump crash kernel"
select RELOCATABLE
help
Generate crash dump after being started by kexec. This should
be normally only set in special crash dump kernels which are
loaded in the main kernel with kexec-tools into a specially
reserved region and then later executed after a crash by
kdump/kexec.
For more details see Documentation/admin-guide/kdump/kdump.rst
config RELOCATABLE
bool "Relocatable kernel"
help
This builds the kernel as a Position Independent Executable (PIE),
which retains all relocation metadata required, so as to relocate
the kernel binary at runtime to a different virtual address from
its link address.
config RANDOMIZE_BASE
bool "Randomize the address of the kernel (KASLR)"
depends on RELOCATABLE
help
Randomizes the physical and virtual address at which the
kernel image is loaded, as a security feature that
deters exploit attempts relying on knowledge of the location
of kernel internals.
The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
If unsure, say N.
config RANDOMIZE_BASE_MAX_OFFSET
hex "Maximum KASLR offset" if EXPERT
depends on RANDOMIZE_BASE
range 0x0 0x10000000
default "0x01000000"
help
When KASLR is active, this provides the maximum offset that will
be applied to the kernel image. It should be set according to the
amount of physical RAM available in the target system.
This is limited by the size of the lower address memory, 256MB.
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
enabled via /proc/<pid>/seccomp, it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
If unsure, say Y. Only embedded should say N here.
endmenu
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_VMEMMAP_ENABLE
help
Say Y to support efficient handling of sparse physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/mm/numa.rst> for more.
config ARCH_ENABLE_THP_MIGRATION
def_bool y
depends on TRANSPARENT_HUGEPAGE
config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
config MMU
bool
default y
config ARCH_MMAP_RND_BITS_MIN
default 12
config ARCH_MMAP_RND_BITS_MAX
default 18
menu "Power management options"
config ARCH_SUSPEND_POSSIBLE
def_bool y
config ARCH_HIBERNATION_POSSIBLE
def_bool y
source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
endmenu
source "drivers/firmware/Kconfig"