| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * OMAP2+ common Power & Reset Management (PRM) IP block functions | |
| * | |
| * Copyright (C) 2011 Texas Instruments, Inc. | |
| * Tero Kristo <t-kristo@ti.com> | |
| * | |
| * For historical purposes, the API used to configure the PRM | |
| * interrupt handler refers to it as the "PRCM interrupt." The | |
| * underlying registers are located in the PRM on OMAP3/4. | |
| * | |
| * XXX This code should eventually be moved to a PRM driver. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/clk/ti.h> | |
| #include "soc.h" | |
| #include "prm2xxx_3xxx.h" | |
| #include "prm2xxx.h" | |
| #include "prm3xxx.h" | |
| #include "prm33xx.h" | |
| #include "prm44xx.h" | |
| #include "prm54xx.h" | |
| #include "prm7xx.h" | |
| #include "prcm43xx.h" | |
| #include "common.h" | |
| #include "clock.h" | |
| #include "cm.h" | |
| #include "control.h" | |
| /* | |
| * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs | |
| * XXX this is technically not needed, since | |
| * omap_prcm_register_chain_handler() could allocate this based on the | |
| * actual amount of memory needed for the SoC | |
| */ | |
| #define OMAP_PRCM_MAX_NR_PENDING_REG 2 | |
| /* | |
| * prcm_irq_chips: an array of all of the "generic IRQ chips" in use | |
| * by the PRCM interrupt handler code. There will be one 'chip' per | |
| * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have | |
| * one "chip" and OMAP4 will have two.) | |
| */ | |
| static struct irq_chip_generic **prcm_irq_chips; | |
| /* | |
| * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code | |
| * is currently running on. Defined and passed by initialization code | |
| * that calls omap_prcm_register_chain_handler(). | |
| */ | |
| static struct omap_prcm_irq_setup *prcm_irq_setup; | |
| /* prm_base: base virtual address of the PRM IP block */ | |
| struct omap_domain_base prm_base; | |
| u16 prm_features; | |
| /* | |
| * prm_ll_data: function pointers to SoC-specific implementations of | |
| * common PRM functions | |
| */ | |
| static struct prm_ll_data null_prm_ll_data; | |
| static struct prm_ll_data *prm_ll_data = &null_prm_ll_data; | |
| /* Private functions */ | |
| /* | |
| * Move priority events from events to priority_events array | |
| */ | |
| static void omap_prcm_events_filter_priority(unsigned long *events, | |
| unsigned long *priority_events) | |
| { | |
| int i; | |
| for (i = 0; i < prcm_irq_setup->nr_regs; i++) { | |
| priority_events[i] = | |
| events[i] & prcm_irq_setup->priority_mask[i]; | |
| events[i] ^= priority_events[i]; | |
| } | |
| } | |
| /* | |
| * PRCM Interrupt Handler | |
| * | |
| * This is a common handler for the OMAP PRCM interrupts. Pending | |
| * interrupts are detected by a call to prcm_pending_events and | |
| * dispatched accordingly. Clearing of the wakeup events should be | |
| * done by the SoC specific individual handlers. | |
| */ | |
| static void omap_prcm_irq_handler(struct irq_desc *desc) | |
| { | |
| unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG]; | |
| unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| unsigned int virtirq; | |
| int nr_irq = prcm_irq_setup->nr_regs * 32; | |
| /* | |
| * If we are suspended, mask all interrupts from PRCM level, | |
| * this does not ack them, and they will be pending until we | |
| * re-enable the interrupts, at which point the | |
| * omap_prcm_irq_handler will be executed again. The | |
| * _save_and_clear_irqen() function must ensure that the PRM | |
| * write to disable all IRQs has reached the PRM before | |
| * returning, or spurious PRCM interrupts may occur during | |
| * suspend. | |
| */ | |
| if (prcm_irq_setup->suspended) { | |
| prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask); | |
| prcm_irq_setup->suspend_save_flag = true; | |
| } | |
| /* | |
| * Loop until all pending irqs are handled, since | |
| * generic_handle_irq() can cause new irqs to come | |
| */ | |
| while (!prcm_irq_setup->suspended) { | |
| prcm_irq_setup->read_pending_irqs(pending); | |
| /* No bit set, then all IRQs are handled */ | |
| if (find_first_bit(pending, nr_irq) >= nr_irq) | |
| break; | |
| omap_prcm_events_filter_priority(pending, priority_pending); | |
| /* | |
| * Loop on all currently pending irqs so that new irqs | |
| * cannot starve previously pending irqs | |
| */ | |
| /* Serve priority events first */ | |
| for_each_set_bit(virtirq, priority_pending, nr_irq) | |
| generic_handle_irq(prcm_irq_setup->base_irq + virtirq); | |
| /* Serve normal events next */ | |
| for_each_set_bit(virtirq, pending, nr_irq) | |
| generic_handle_irq(prcm_irq_setup->base_irq + virtirq); | |
| } | |
| if (chip->irq_ack) | |
| chip->irq_ack(&desc->irq_data); | |
| if (chip->irq_eoi) | |
| chip->irq_eoi(&desc->irq_data); | |
| chip->irq_unmask(&desc->irq_data); | |
| prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */ | |
| } | |
| /* Public functions */ | |
| /** | |
| * omap_prcm_event_to_irq - given a PRCM event name, returns the | |
| * corresponding IRQ on which the handler should be registered | |
| * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq | |
| * | |
| * Returns the Linux internal IRQ ID corresponding to @name upon success, | |
| * or -ENOENT upon failure. | |
| */ | |
| int omap_prcm_event_to_irq(const char *name) | |
| { | |
| int i; | |
| if (!prcm_irq_setup || !name) | |
| return -ENOENT; | |
| for (i = 0; i < prcm_irq_setup->nr_irqs; i++) | |
| if (!strcmp(prcm_irq_setup->irqs[i].name, name)) | |
| return prcm_irq_setup->base_irq + | |
| prcm_irq_setup->irqs[i].offset; | |
| return -ENOENT; | |
| } | |
| /** | |
| * omap_prcm_irq_cleanup - reverses memory allocated and other steps | |
| * done by omap_prcm_register_chain_handler() | |
| * | |
| * No return value. | |
| */ | |
| void omap_prcm_irq_cleanup(void) | |
| { | |
| unsigned int irq; | |
| int i; | |
| if (!prcm_irq_setup) { | |
| pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n"); | |
| return; | |
| } | |
| if (prcm_irq_chips) { | |
| for (i = 0; i < prcm_irq_setup->nr_regs; i++) { | |
| if (prcm_irq_chips[i]) | |
| irq_remove_generic_chip(prcm_irq_chips[i], | |
| 0xffffffff, 0, 0); | |
| prcm_irq_chips[i] = NULL; | |
| } | |
| kfree(prcm_irq_chips); | |
| prcm_irq_chips = NULL; | |
| } | |
| kfree(prcm_irq_setup->saved_mask); | |
| prcm_irq_setup->saved_mask = NULL; | |
| kfree(prcm_irq_setup->priority_mask); | |
| prcm_irq_setup->priority_mask = NULL; | |
| irq = prcm_irq_setup->irq; | |
| irq_set_chained_handler(irq, NULL); | |
| if (prcm_irq_setup->base_irq > 0) | |
| irq_free_descs(prcm_irq_setup->base_irq, | |
| prcm_irq_setup->nr_regs * 32); | |
| prcm_irq_setup->base_irq = 0; | |
| } | |
| void omap_prcm_irq_prepare(void) | |
| { | |
| prcm_irq_setup->suspended = true; | |
| } | |
| void omap_prcm_irq_complete(void) | |
| { | |
| prcm_irq_setup->suspended = false; | |
| /* If we have not saved the masks, do not attempt to restore */ | |
| if (!prcm_irq_setup->suspend_save_flag) | |
| return; | |
| prcm_irq_setup->suspend_save_flag = false; | |
| /* | |
| * Re-enable all masked PRCM irq sources, this causes the PRCM | |
| * interrupt to fire immediately if the events were masked | |
| * previously in the chain handler | |
| */ | |
| prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask); | |
| } | |
| /** | |
| * omap_prcm_register_chain_handler - initializes the prcm chained interrupt | |
| * handler based on provided parameters | |
| * @irq_setup: hardware data about the underlying PRM/PRCM | |
| * | |
| * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up | |
| * one generic IRQ chip per PRM interrupt status/enable register pair. | |
| * Returns 0 upon success, -EINVAL if called twice or if invalid | |
| * arguments are passed, or -ENOMEM on any other error. | |
| */ | |
| int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) | |
| { | |
| int nr_regs; | |
| u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; | |
| int offset, i, irq; | |
| struct irq_chip_generic *gc; | |
| struct irq_chip_type *ct; | |
| if (!irq_setup) | |
| return -EINVAL; | |
| nr_regs = irq_setup->nr_regs; | |
| if (prcm_irq_setup) { | |
| pr_err("PRCM: already initialized; won't reinitialize\n"); | |
| return -EINVAL; | |
| } | |
| if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) { | |
| pr_err("PRCM: nr_regs too large\n"); | |
| return -EINVAL; | |
| } | |
| prcm_irq_setup = irq_setup; | |
| prcm_irq_chips = kcalloc(nr_regs, sizeof(void *), GFP_KERNEL); | |
| prcm_irq_setup->saved_mask = kcalloc(nr_regs, sizeof(u32), | |
| GFP_KERNEL); | |
| prcm_irq_setup->priority_mask = kcalloc(nr_regs, sizeof(u32), | |
| GFP_KERNEL); | |
| if (!prcm_irq_chips || !prcm_irq_setup->saved_mask || | |
| !prcm_irq_setup->priority_mask) | |
| goto err; | |
| memset(mask, 0, sizeof(mask)); | |
| for (i = 0; i < irq_setup->nr_irqs; i++) { | |
| offset = irq_setup->irqs[i].offset; | |
| mask[offset >> 5] |= 1 << (offset & 0x1f); | |
| if (irq_setup->irqs[i].priority) | |
| irq_setup->priority_mask[offset >> 5] |= | |
| 1 << (offset & 0x1f); | |
| } | |
| irq = irq_setup->irq; | |
| irq_set_chained_handler(irq, omap_prcm_irq_handler); | |
| irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32, | |
| 0); | |
| if (irq_setup->base_irq < 0) { | |
| pr_err("PRCM: failed to allocate irq descs: %d\n", | |
| irq_setup->base_irq); | |
| goto err; | |
| } | |
| for (i = 0; i < irq_setup->nr_regs; i++) { | |
| gc = irq_alloc_generic_chip("PRCM", 1, | |
| irq_setup->base_irq + i * 32, prm_base.va, | |
| handle_level_irq); | |
| if (!gc) { | |
| pr_err("PRCM: failed to allocate generic chip\n"); | |
| goto err; | |
| } | |
| ct = gc->chip_types; | |
| ct->chip.irq_ack = irq_gc_ack_set_bit; | |
| ct->chip.irq_mask = irq_gc_mask_clr_bit; | |
| ct->chip.irq_unmask = irq_gc_mask_set_bit; | |
| ct->regs.ack = irq_setup->ack + i * 4; | |
| ct->regs.mask = irq_setup->mask + i * 4; | |
| irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0); | |
| prcm_irq_chips[i] = gc; | |
| } | |
| irq = omap_prcm_event_to_irq("io"); | |
| omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); | |
| return 0; | |
| err: | |
| omap_prcm_irq_cleanup(); | |
| return -ENOMEM; | |
| } | |
| /** | |
| * omap2_set_globals_prm - set the PRM base address (for early use) | |
| * @prm: PRM base virtual address | |
| * | |
| * XXX Will be replaced when the PRM/CM drivers are completed. | |
| */ | |
| void __init omap2_set_globals_prm(void __iomem *prm) | |
| { | |
| prm_base.va = prm; | |
| } | |
| /** | |
| * prm_read_reset_sources - return the sources of the SoC's last reset | |
| * | |
| * Return a u32 bitmask representing the reset sources that caused the | |
| * SoC to reset. The low-level per-SoC functions called by this | |
| * function remap the SoC-specific reset source bits into an | |
| * OMAP-common set of reset source bits, defined in | |
| * arch/arm/mach-omap2/prm.h. Returns the standardized reset source | |
| * u32 bitmask from the hardware upon success, or returns (1 << | |
| * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources() | |
| * function was registered. | |
| */ | |
| u32 prm_read_reset_sources(void) | |
| { | |
| u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT; | |
| if (prm_ll_data->read_reset_sources) | |
| ret = prm_ll_data->read_reset_sources(); | |
| else | |
| WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__); | |
| return ret; | |
| } | |
| /** | |
| * prm_was_any_context_lost_old - was device context lost? (old API) | |
| * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) | |
| * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) | |
| * @idx: CONTEXT register offset | |
| * | |
| * Return 1 if any bits were set in the *_CONTEXT_* register | |
| * identified by (@part, @inst, @idx), which means that some context | |
| * was lost for that module; otherwise, return 0. XXX Deprecated; | |
| * callers need to use a less-SoC-dependent way to identify hardware | |
| * IP blocks. | |
| */ | |
| bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx) | |
| { | |
| bool ret = true; | |
| if (prm_ll_data->was_any_context_lost_old) | |
| ret = prm_ll_data->was_any_context_lost_old(part, inst, idx); | |
| else | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return ret; | |
| } | |
| /** | |
| * prm_clear_context_lost_flags_old - clear context loss flags (old API) | |
| * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) | |
| * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) | |
| * @idx: CONTEXT register offset | |
| * | |
| * Clear hardware context loss bits for the module identified by | |
| * (@part, @inst, @idx). No return value. XXX Deprecated; callers | |
| * need to use a less-SoC-dependent way to identify hardware IP | |
| * blocks. | |
| */ | |
| void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx) | |
| { | |
| if (prm_ll_data->clear_context_loss_flags_old) | |
| prm_ll_data->clear_context_loss_flags_old(part, inst, idx); | |
| else | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| } | |
| /** | |
| * omap_prm_assert_hardreset - assert hardreset for an IP block | |
| * @shift: register bit shift corresponding to the reset line | |
| * @part: PRM partition | |
| * @prm_mod: PRM submodule base or instance offset | |
| * @offset: register offset | |
| * | |
| * Asserts a hardware reset line for an IP block. | |
| */ | |
| int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset) | |
| { | |
| if (!prm_ll_data->assert_hardreset) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset); | |
| } | |
| /** | |
| * omap_prm_deassert_hardreset - deassert hardreset for an IP block | |
| * @shift: register bit shift corresponding to the reset line | |
| * @st_shift: reset status bit shift corresponding to the reset line | |
| * @part: PRM partition | |
| * @prm_mod: PRM submodule base or instance offset | |
| * @offset: register offset | |
| * @st_offset: status register offset | |
| * | |
| * Deasserts a hardware reset line for an IP block. | |
| */ | |
| int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod, | |
| u16 offset, u16 st_offset) | |
| { | |
| if (!prm_ll_data->deassert_hardreset) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod, | |
| offset, st_offset); | |
| } | |
| /** | |
| * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block | |
| * @shift: register bit shift corresponding to the reset line | |
| * @part: PRM partition | |
| * @prm_mod: PRM submodule base or instance offset | |
| * @offset: register offset | |
| * | |
| * Checks if a hardware reset line for an IP block is enabled or not. | |
| */ | |
| int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset) | |
| { | |
| if (!prm_ll_data->is_hardreset_asserted) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset); | |
| } | |
| /** | |
| * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain | |
| * | |
| * Clear any previously-latched I/O wakeup events and ensure that the | |
| * I/O wakeup gates are aligned with the current mux settings. | |
| * Calls SoC specific I/O chain reconfigure function if available, | |
| * otherwise does nothing. | |
| */ | |
| void omap_prm_reconfigure_io_chain(void) | |
| { | |
| if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain) | |
| return; | |
| prcm_irq_setup->reconfigure_io_chain(); | |
| } | |
| /** | |
| * omap_prm_reset_system - trigger global SW reset | |
| * | |
| * Triggers SoC specific global warm reset to reboot the device. | |
| */ | |
| void omap_prm_reset_system(void) | |
| { | |
| if (!prm_ll_data->reset_system) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return; | |
| } | |
| prm_ll_data->reset_system(); | |
| while (1) { | |
| cpu_relax(); | |
| wfe(); | |
| } | |
| } | |
| /** | |
| * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt | |
| * @module: PRM module to clear wakeups from | |
| * @regs: register to clear | |
| * @wkst_mask: wkst bits to clear | |
| * | |
| * Clears any wakeup events for the module and register set defined. | |
| * Uses SoC specific implementation to do the actual wakeup status | |
| * clearing. | |
| */ | |
| int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) | |
| { | |
| if (!prm_ll_data->clear_mod_irqs) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask); | |
| } | |
| /** | |
| * omap_prm_vp_check_txdone - check voltage processor TX done status | |
| * | |
| * Checks if voltage processor transmission has been completed. | |
| * Returns non-zero if a transmission has completed, 0 otherwise. | |
| */ | |
| u32 omap_prm_vp_check_txdone(u8 vp_id) | |
| { | |
| if (!prm_ll_data->vp_check_txdone) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return 0; | |
| } | |
| return prm_ll_data->vp_check_txdone(vp_id); | |
| } | |
| /** | |
| * omap_prm_vp_clear_txdone - clears voltage processor TX done status | |
| * | |
| * Clears the status bit for completed voltage processor transmission | |
| * returned by prm_vp_check_txdone. | |
| */ | |
| void omap_prm_vp_clear_txdone(u8 vp_id) | |
| { | |
| if (!prm_ll_data->vp_clear_txdone) { | |
| WARN_ONCE(1, "prm: %s: no mapping function defined\n", | |
| __func__); | |
| return; | |
| } | |
| prm_ll_data->vp_clear_txdone(vp_id); | |
| } | |
| /** | |
| * prm_register - register per-SoC low-level data with the PRM | |
| * @pld: low-level per-SoC OMAP PRM data & function pointers to register | |
| * | |
| * Register per-SoC low-level OMAP PRM data and function pointers with | |
| * the OMAP PRM common interface. The caller must keep the data | |
| * pointed to by @pld valid until it calls prm_unregister() and | |
| * it returns successfully. Returns 0 upon success, -EINVAL if @pld | |
| * is NULL, or -EEXIST if prm_register() has already been called | |
| * without an intervening prm_unregister(). | |
| */ | |
| int prm_register(struct prm_ll_data *pld) | |
| { | |
| if (!pld) | |
| return -EINVAL; | |
| if (prm_ll_data != &null_prm_ll_data) | |
| return -EEXIST; | |
| prm_ll_data = pld; | |
| return 0; | |
| } | |
| /** | |
| * prm_unregister - unregister per-SoC low-level data & function pointers | |
| * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister | |
| * | |
| * Unregister per-SoC low-level OMAP PRM data and function pointers | |
| * that were previously registered with prm_register(). The | |
| * caller may not destroy any of the data pointed to by @pld until | |
| * this function returns successfully. Returns 0 upon success, or | |
| * -EINVAL if @pld is NULL or if @pld does not match the struct | |
| * prm_ll_data * previously registered by prm_register(). | |
| */ | |
| int prm_unregister(struct prm_ll_data *pld) | |
| { | |
| if (!pld || prm_ll_data != pld) | |
| return -EINVAL; | |
| prm_ll_data = &null_prm_ll_data; | |
| return 0; | |
| } | |
| #ifdef CONFIG_ARCH_OMAP2 | |
| static struct omap_prcm_init_data omap2_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = omap2xxx_prm_init, | |
| }; | |
| #endif | |
| #ifdef CONFIG_ARCH_OMAP3 | |
| static struct omap_prcm_init_data omap3_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = omap3xxx_prm_init, | |
| /* | |
| * IVA2 offset is a negative value, must offset the prm_base | |
| * address by this to get it to positive | |
| */ | |
| .offset = -OMAP3430_IVA2_MOD, | |
| }; | |
| #endif | |
| #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX) | |
| static struct omap_prcm_init_data am3_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = am33xx_prm_init, | |
| }; | |
| #endif | |
| #ifdef CONFIG_SOC_TI81XX | |
| static struct omap_prcm_init_data dm814_pllss_data __initdata = { | |
| .index = TI_CLKM_PLLSS, | |
| .init = am33xx_prm_init, | |
| }; | |
| #endif | |
| #ifdef CONFIG_ARCH_OMAP4 | |
| static struct omap_prcm_init_data omap4_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = omap44xx_prm_init, | |
| .device_inst_offset = OMAP4430_PRM_DEVICE_INST, | |
| .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE, | |
| }; | |
| #endif | |
| #ifdef CONFIG_SOC_OMAP5 | |
| static struct omap_prcm_init_data omap5_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = omap44xx_prm_init, | |
| .device_inst_offset = OMAP54XX_PRM_DEVICE_INST, | |
| .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE, | |
| }; | |
| #endif | |
| #ifdef CONFIG_SOC_DRA7XX | |
| static struct omap_prcm_init_data dra7_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = omap44xx_prm_init, | |
| .device_inst_offset = DRA7XX_PRM_DEVICE_INST, | |
| .flags = PRM_HAS_IO_WAKEUP, | |
| }; | |
| #endif | |
| #ifdef CONFIG_SOC_AM43XX | |
| static struct omap_prcm_init_data am4_prm_data __initdata = { | |
| .index = TI_CLKM_PRM, | |
| .init = omap44xx_prm_init, | |
| .device_inst_offset = AM43XX_PRM_DEVICE_INST, | |
| .flags = PRM_HAS_IO_WAKEUP, | |
| }; | |
| #endif | |
| #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) | |
| static struct omap_prcm_init_data scrm_data __initdata = { | |
| .index = TI_CLKM_SCRM, | |
| }; | |
| #endif | |
| static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { | |
| #ifdef CONFIG_SOC_AM33XX | |
| { .compatible = "ti,am3-prcm", .data = &am3_prm_data }, | |
| #endif | |
| #ifdef CONFIG_SOC_AM43XX | |
| { .compatible = "ti,am4-prcm", .data = &am4_prm_data }, | |
| #endif | |
| #ifdef CONFIG_SOC_TI81XX | |
| { .compatible = "ti,dm814-prcm", .data = &am3_prm_data }, | |
| { .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data }, | |
| { .compatible = "ti,dm816-prcm", .data = &am3_prm_data }, | |
| #endif | |
| #ifdef CONFIG_ARCH_OMAP2 | |
| { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data }, | |
| #endif | |
| #ifdef CONFIG_ARCH_OMAP3 | |
| { .compatible = "ti,omap3-prm", .data = &omap3_prm_data }, | |
| #endif | |
| #ifdef CONFIG_ARCH_OMAP4 | |
| { .compatible = "ti,omap4-prm", .data = &omap4_prm_data }, | |
| { .compatible = "ti,omap4-scrm", .data = &scrm_data }, | |
| #endif | |
| #ifdef CONFIG_SOC_OMAP5 | |
| { .compatible = "ti,omap5-prm", .data = &omap5_prm_data }, | |
| { .compatible = "ti,omap5-scrm", .data = &scrm_data }, | |
| #endif | |
| #ifdef CONFIG_SOC_DRA7XX | |
| { .compatible = "ti,dra7-prm", .data = &dra7_prm_data }, | |
| #endif | |
| { } | |
| }; | |
| /** | |
| * omap2_prm_base_init - initialize iomappings for the PRM driver | |
| * | |
| * Detects and initializes the iomappings for the PRM driver, based | |
| * on the DT data. Returns 0 in success, negative error value | |
| * otherwise. | |
| */ | |
| int __init omap2_prm_base_init(void) | |
| { | |
| struct device_node *np; | |
| const struct of_device_id *match; | |
| struct omap_prcm_init_data *data; | |
| struct resource res; | |
| int ret; | |
| for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { | |
| data = (struct omap_prcm_init_data *)match->data; | |
| ret = of_address_to_resource(np, 0, &res); | |
| if (ret) | |
| return ret; | |
| data->mem = ioremap(res.start, resource_size(&res)); | |
| if (data->index == TI_CLKM_PRM) { | |
| prm_base.va = data->mem + data->offset; | |
| prm_base.pa = res.start + data->offset; | |
| } | |
| data->np = np; | |
| if (data->init) | |
| data->init(data); | |
| } | |
| return 0; | |
| } | |
| int __init omap2_prcm_base_init(void) | |
| { | |
| int ret; | |
| ret = omap2_prm_base_init(); | |
| if (ret) | |
| return ret; | |
| return omap2_cm_base_init(); | |
| } | |
| /** | |
| * omap_prcm_init - low level init for the PRCM drivers | |
| * | |
| * Initializes the low level clock infrastructure for PRCM drivers. | |
| * Returns 0 in success, negative error value in failure. | |
| */ | |
| int __init omap_prcm_init(void) | |
| { | |
| struct device_node *np; | |
| const struct of_device_id *match; | |
| const struct omap_prcm_init_data *data; | |
| int ret; | |
| for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { | |
| data = match->data; | |
| ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); | |
| if (ret) | |
| return ret; | |
| } | |
| omap_cm_init(); | |
| return 0; | |
| } | |
| static int __init prm_late_init(void) | |
| { | |
| if (prm_ll_data->late_init) | |
| return prm_ll_data->late_init(); | |
| return 0; | |
| } | |
| subsys_initcall(prm_late_init); |