| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Support for Sharp SL-C7xx PDAs | |
| * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky) | |
| * | |
| * Copyright (c) 2004-2005 Richard Purdie | |
| * | |
| * Based on Sharp's 2.4 kernel patches/lubbock.c | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> /* symbol_get ; symbol_put */ | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/major.h> | |
| #include <linux/fs.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/leds.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/mtd/physmap.h> | |
| #include <linux/pm.h> | |
| #include <linux/gpio.h> | |
| #include <linux/gpio/machine.h> | |
| #include <linux/backlight.h> | |
| #include <linux/i2c.h> | |
| #include <linux/platform_data/i2c-pxa.h> | |
| #include <linux/io.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/spi/ads7846.h> | |
| #include <linux/spi/corgi_lcd.h> | |
| #include <linux/spi/pxa2xx_spi.h> | |
| #include <linux/mtd/sharpsl.h> | |
| #include <linux/input/matrix_keypad.h> | |
| #include <linux/gpio_keys.h> | |
| #include <linux/memblock.h> | |
| #include <video/w100fb.h> | |
| #include <asm/setup.h> | |
| #include <asm/memory.h> | |
| #include <asm/mach-types.h> | |
| #include <mach/hardware.h> | |
| #include <asm/irq.h> | |
| #include <asm/mach/arch.h> | |
| #include <asm/mach/map.h> | |
| #include <asm/mach/irq.h> | |
| #include "pxa25x.h" | |
| #include <linux/platform_data/irda-pxaficp.h> | |
| #include <linux/platform_data/mmc-pxamci.h> | |
| #include "udc.h" | |
| #include <mach/corgi.h> | |
| #include "sharpsl_pm.h" | |
| #include <asm/mach/sharpsl_param.h> | |
| #include <asm/hardware/scoop.h> | |
| #include "generic.h" | |
| #include "devices.h" | |
| static unsigned long corgi_pin_config[] __initdata = { | |
| /* Static Memory I/O */ | |
| GPIO78_nCS_2, /* w100fb */ | |
| GPIO80_nCS_4, /* scoop */ | |
| /* SSP1 */ | |
| GPIO23_SSP1_SCLK, | |
| GPIO25_SSP1_TXD, | |
| GPIO26_SSP1_RXD, | |
| GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */ | |
| /* I2S */ | |
| GPIO28_I2S_BITCLK_OUT, | |
| GPIO29_I2S_SDATA_IN, | |
| GPIO30_I2S_SDATA_OUT, | |
| GPIO31_I2S_SYNC, | |
| GPIO32_I2S_SYSCLK, | |
| /* Infra-Red */ | |
| GPIO47_FICP_TXD, | |
| GPIO46_FICP_RXD, | |
| /* FFUART */ | |
| GPIO40_FFUART_DTR, | |
| GPIO41_FFUART_RTS, | |
| GPIO39_FFUART_TXD, | |
| GPIO37_FFUART_DSR, | |
| GPIO34_FFUART_RXD, | |
| GPIO35_FFUART_CTS, | |
| /* PC Card */ | |
| GPIO48_nPOE, | |
| GPIO49_nPWE, | |
| GPIO50_nPIOR, | |
| GPIO51_nPIOW, | |
| GPIO52_nPCE_1, | |
| GPIO53_nPCE_2, | |
| GPIO54_nPSKTSEL, | |
| GPIO55_nPREG, | |
| GPIO56_nPWAIT, | |
| GPIO57_nIOIS16, | |
| /* MMC */ | |
| GPIO6_MMC_CLK, | |
| GPIO8_MMC_CS0, | |
| /* GPIO Matrix Keypad */ | |
| GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */ | |
| GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */ | |
| GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */ | |
| GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */ | |
| GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */ | |
| GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */ | |
| GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */ | |
| GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */ | |
| GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */ | |
| GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */ | |
| GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */ | |
| GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */ | |
| GPIO58_GPIO, /* row 0 */ | |
| GPIO59_GPIO, /* row 1 */ | |
| GPIO60_GPIO, /* row 2 */ | |
| GPIO61_GPIO, /* row 3 */ | |
| GPIO62_GPIO, /* row 4 */ | |
| GPIO63_GPIO, /* row 5 */ | |
| GPIO64_GPIO, /* row 6 */ | |
| GPIO65_GPIO, /* row 7 */ | |
| /* GPIO */ | |
| GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ | |
| GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ | |
| GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */ | |
| GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */ | |
| GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */ | |
| GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ | |
| GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ | |
| GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */ | |
| GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */ | |
| GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ | |
| GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */ | |
| GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */ | |
| GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */ | |
| }; | |
| /* | |
| * Corgi SCOOP Device | |
| */ | |
| static struct resource corgi_scoop_resources[] = { | |
| [0] = { | |
| .start = 0x10800000, | |
| .end = 0x10800fff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| }; | |
| static struct scoop_config corgi_scoop_setup = { | |
| .io_dir = CORGI_SCOOP_IO_DIR, | |
| .io_out = CORGI_SCOOP_IO_OUT, | |
| .gpio_base = CORGI_SCOOP_GPIO_BASE, | |
| }; | |
| struct platform_device corgiscoop_device = { | |
| .name = "sharp-scoop", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &corgi_scoop_setup, | |
| }, | |
| .num_resources = ARRAY_SIZE(corgi_scoop_resources), | |
| .resource = corgi_scoop_resources, | |
| }; | |
| static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { | |
| { | |
| .dev = &corgiscoop_device.dev, | |
| .irq = CORGI_IRQ_GPIO_CF_IRQ, | |
| .cd_irq = CORGI_IRQ_GPIO_CF_CD, | |
| .cd_irq_str = "PCMCIA0 CD", | |
| }, | |
| }; | |
| static struct scoop_pcmcia_config corgi_pcmcia_config = { | |
| .devs = &corgi_pcmcia_scoop[0], | |
| .num_devs = 1, | |
| }; | |
| static struct w100_mem_info corgi_fb_mem = { | |
| .ext_cntl = 0x00040003, | |
| .sdram_mode_reg = 0x00650021, | |
| .ext_timing_cntl = 0x10002a4a, | |
| .io_cntl = 0x7ff87012, | |
| .size = 0x1fffff, | |
| }; | |
| static struct w100_gen_regs corgi_fb_regs = { | |
| .lcd_format = 0x00000003, | |
| .lcdd_cntl1 = 0x01CC0000, | |
| .lcdd_cntl2 = 0x0003FFFF, | |
| .genlcd_cntl1 = 0x00FFFF0D, | |
| .genlcd_cntl2 = 0x003F3003, | |
| .genlcd_cntl3 = 0x000102aa, | |
| }; | |
| static struct w100_gpio_regs corgi_fb_gpio = { | |
| .init_data1 = 0x000000bf, | |
| .init_data2 = 0x00000000, | |
| .gpio_dir1 = 0x00000000, | |
| .gpio_oe1 = 0x03c0feff, | |
| .gpio_dir2 = 0x00000000, | |
| .gpio_oe2 = 0x00000000, | |
| }; | |
| static struct w100_mode corgi_fb_modes[] = { | |
| { | |
| .xres = 480, | |
| .yres = 640, | |
| .left_margin = 0x56, | |
| .right_margin = 0x55, | |
| .upper_margin = 0x03, | |
| .lower_margin = 0x00, | |
| .crtc_ss = 0x82360056, | |
| .crtc_ls = 0xA0280000, | |
| .crtc_gs = 0x80280028, | |
| .crtc_vpos_gs = 0x02830002, | |
| .crtc_rev = 0x00400008, | |
| .crtc_dclk = 0xA0000000, | |
| .crtc_gclk = 0x8015010F, | |
| .crtc_goe = 0x80100110, | |
| .crtc_ps1_active = 0x41060010, | |
| .pll_freq = 75, | |
| .fast_pll_freq = 100, | |
| .sysclk_src = CLK_SRC_PLL, | |
| .sysclk_divider = 0, | |
| .pixclk_src = CLK_SRC_PLL, | |
| .pixclk_divider = 2, | |
| .pixclk_divider_rotated = 6, | |
| },{ | |
| .xres = 240, | |
| .yres = 320, | |
| .left_margin = 0x27, | |
| .right_margin = 0x2e, | |
| .upper_margin = 0x01, | |
| .lower_margin = 0x00, | |
| .crtc_ss = 0x81170027, | |
| .crtc_ls = 0xA0140000, | |
| .crtc_gs = 0xC0140014, | |
| .crtc_vpos_gs = 0x00010141, | |
| .crtc_rev = 0x00400008, | |
| .crtc_dclk = 0xA0000000, | |
| .crtc_gclk = 0x8015010F, | |
| .crtc_goe = 0x80100110, | |
| .crtc_ps1_active = 0x41060010, | |
| .pll_freq = 0, | |
| .fast_pll_freq = 0, | |
| .sysclk_src = CLK_SRC_XTAL, | |
| .sysclk_divider = 0, | |
| .pixclk_src = CLK_SRC_XTAL, | |
| .pixclk_divider = 1, | |
| .pixclk_divider_rotated = 1, | |
| }, | |
| }; | |
| static struct w100fb_mach_info corgi_fb_info = { | |
| .init_mode = INIT_MODE_ROTATED, | |
| .mem = &corgi_fb_mem, | |
| .regs = &corgi_fb_regs, | |
| .modelist = &corgi_fb_modes[0], | |
| .num_modes = 2, | |
| .gpio = &corgi_fb_gpio, | |
| .xtal_freq = 12500000, | |
| .xtal_dbl = 0, | |
| }; | |
| static struct resource corgi_fb_resources[] = { | |
| [0] = { | |
| .start = 0x08000000, | |
| .end = 0x08ffffff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| }; | |
| static struct platform_device corgifb_device = { | |
| .name = "w100fb", | |
| .id = -1, | |
| .num_resources = ARRAY_SIZE(corgi_fb_resources), | |
| .resource = corgi_fb_resources, | |
| .dev = { | |
| .platform_data = &corgi_fb_info, | |
| }, | |
| }; | |
| /* | |
| * Corgi Keyboard Device | |
| */ | |
| #define CORGI_KEY_CALENDER KEY_F1 | |
| #define CORGI_KEY_ADDRESS KEY_F2 | |
| #define CORGI_KEY_FN KEY_F3 | |
| #define CORGI_KEY_CANCEL KEY_F4 | |
| #define CORGI_KEY_OFF KEY_SUSPEND | |
| #define CORGI_KEY_EXOK KEY_F5 | |
| #define CORGI_KEY_EXCANCEL KEY_F6 | |
| #define CORGI_KEY_EXJOGDOWN KEY_F7 | |
| #define CORGI_KEY_EXJOGUP KEY_F8 | |
| #define CORGI_KEY_JAP1 KEY_LEFTCTRL | |
| #define CORGI_KEY_JAP2 KEY_LEFTALT | |
| #define CORGI_KEY_MAIL KEY_F10 | |
| #define CORGI_KEY_OK KEY_F11 | |
| #define CORGI_KEY_MENU KEY_F12 | |
| static const uint32_t corgikbd_keymap[] = { | |
| KEY(0, 1, KEY_1), | |
| KEY(0, 2, KEY_3), | |
| KEY(0, 3, KEY_5), | |
| KEY(0, 4, KEY_6), | |
| KEY(0, 5, KEY_7), | |
| KEY(0, 6, KEY_9), | |
| KEY(0, 7, KEY_0), | |
| KEY(0, 8, KEY_BACKSPACE), | |
| KEY(1, 1, KEY_2), | |
| KEY(1, 2, KEY_4), | |
| KEY(1, 3, KEY_R), | |
| KEY(1, 4, KEY_Y), | |
| KEY(1, 5, KEY_8), | |
| KEY(1, 6, KEY_I), | |
| KEY(1, 7, KEY_O), | |
| KEY(1, 8, KEY_P), | |
| KEY(2, 0, KEY_TAB), | |
| KEY(2, 1, KEY_Q), | |
| KEY(2, 2, KEY_E), | |
| KEY(2, 3, KEY_T), | |
| KEY(2, 4, KEY_G), | |
| KEY(2, 5, KEY_U), | |
| KEY(2, 6, KEY_J), | |
| KEY(2, 7, KEY_K), | |
| KEY(3, 0, CORGI_KEY_CALENDER), | |
| KEY(3, 1, KEY_W), | |
| KEY(3, 2, KEY_S), | |
| KEY(3, 3, KEY_F), | |
| KEY(3, 4, KEY_V), | |
| KEY(3, 5, KEY_H), | |
| KEY(3, 6, KEY_M), | |
| KEY(3, 7, KEY_L), | |
| KEY(3, 9, KEY_RIGHTSHIFT), | |
| KEY(4, 0, CORGI_KEY_ADDRESS), | |
| KEY(4, 1, KEY_A), | |
| KEY(4, 2, KEY_D), | |
| KEY(4, 3, KEY_C), | |
| KEY(4, 4, KEY_B), | |
| KEY(4, 5, KEY_N), | |
| KEY(4, 6, KEY_DOT), | |
| KEY(4, 8, KEY_ENTER), | |
| KEY(4, 10, KEY_LEFTSHIFT), | |
| KEY(5, 0, CORGI_KEY_MAIL), | |
| KEY(5, 1, KEY_Z), | |
| KEY(5, 2, KEY_X), | |
| KEY(5, 3, KEY_MINUS), | |
| KEY(5, 4, KEY_SPACE), | |
| KEY(5, 5, KEY_COMMA), | |
| KEY(5, 7, KEY_UP), | |
| KEY(5, 11, CORGI_KEY_FN), | |
| KEY(6, 0, KEY_SYSRQ), | |
| KEY(6, 1, CORGI_KEY_JAP1), | |
| KEY(6, 2, CORGI_KEY_JAP2), | |
| KEY(6, 3, CORGI_KEY_CANCEL), | |
| KEY(6, 4, CORGI_KEY_OK), | |
| KEY(6, 5, CORGI_KEY_MENU), | |
| KEY(6, 6, KEY_LEFT), | |
| KEY(6, 7, KEY_DOWN), | |
| KEY(6, 8, KEY_RIGHT), | |
| KEY(7, 0, CORGI_KEY_OFF), | |
| KEY(7, 1, CORGI_KEY_EXOK), | |
| KEY(7, 2, CORGI_KEY_EXCANCEL), | |
| KEY(7, 3, CORGI_KEY_EXJOGDOWN), | |
| KEY(7, 4, CORGI_KEY_EXJOGUP), | |
| }; | |
| static struct matrix_keymap_data corgikbd_keymap_data = { | |
| .keymap = corgikbd_keymap, | |
| .keymap_size = ARRAY_SIZE(corgikbd_keymap), | |
| }; | |
| static const int corgikbd_row_gpios[] = | |
| { 58, 59, 60, 61, 62, 63, 64, 65 }; | |
| static const int corgikbd_col_gpios[] = | |
| { 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 }; | |
| static struct matrix_keypad_platform_data corgikbd_pdata = { | |
| .keymap_data = &corgikbd_keymap_data, | |
| .row_gpios = corgikbd_row_gpios, | |
| .col_gpios = corgikbd_col_gpios, | |
| .num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios), | |
| .num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios), | |
| .col_scan_delay_us = 10, | |
| .debounce_ms = 10, | |
| .wakeup = 1, | |
| }; | |
| static struct platform_device corgikbd_device = { | |
| .name = "matrix-keypad", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &corgikbd_pdata, | |
| }, | |
| }; | |
| static struct gpio_keys_button corgi_gpio_keys[] = { | |
| { | |
| .type = EV_SW, | |
| .code = SW_LID, | |
| .gpio = CORGI_GPIO_SWA, | |
| .desc = "Lid close switch", | |
| .debounce_interval = 500, | |
| }, | |
| { | |
| .type = EV_SW, | |
| .code = SW_TABLET_MODE, | |
| .gpio = CORGI_GPIO_SWB, | |
| .desc = "Tablet mode switch", | |
| .debounce_interval = 500, | |
| }, | |
| { | |
| .type = EV_SW, | |
| .code = SW_HEADPHONE_INSERT, | |
| .gpio = CORGI_GPIO_AK_INT, | |
| .desc = "HeadPhone insert", | |
| .debounce_interval = 500, | |
| }, | |
| }; | |
| static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = { | |
| .buttons = corgi_gpio_keys, | |
| .nbuttons = ARRAY_SIZE(corgi_gpio_keys), | |
| .poll_interval = 250, | |
| }; | |
| static struct platform_device corgi_gpio_keys_device = { | |
| .name = "gpio-keys-polled", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &corgi_gpio_keys_platform_data, | |
| }, | |
| }; | |
| /* | |
| * Corgi LEDs | |
| */ | |
| static struct gpio_led corgi_gpio_leds[] = { | |
| { | |
| .name = "corgi:amber:charge", | |
| .default_trigger = "sharpsl-charge", | |
| .gpio = CORGI_GPIO_LED_ORANGE, | |
| }, | |
| { | |
| .name = "corgi:green:mail", | |
| .default_trigger = "nand-disk", | |
| .gpio = CORGI_GPIO_LED_GREEN, | |
| }, | |
| }; | |
| static struct gpio_led_platform_data corgi_gpio_leds_info = { | |
| .leds = corgi_gpio_leds, | |
| .num_leds = ARRAY_SIZE(corgi_gpio_leds), | |
| }; | |
| static struct platform_device corgiled_device = { | |
| .name = "leds-gpio", | |
| .id = -1, | |
| .dev = { | |
| .platform_data = &corgi_gpio_leds_info, | |
| }, | |
| }; | |
| /* | |
| * Corgi Audio | |
| */ | |
| static struct platform_device corgi_audio_device = { | |
| .name = "corgi-audio", | |
| .id = -1, | |
| }; | |
| /* | |
| * MMC/SD Device | |
| * | |
| * The card detect interrupt isn't debounced so we delay it by 250ms | |
| * to give the card a chance to fully insert/eject. | |
| */ | |
| static struct pxamci_platform_data corgi_mci_platform_data = { | |
| .detect_delay_ms = 250, | |
| .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
| }; | |
| static struct gpiod_lookup_table corgi_mci_gpio_table = { | |
| .dev_id = "pxa2xx-mci.0", | |
| .table = { | |
| /* Card detect on GPIO 9 */ | |
| GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT, | |
| "cd", GPIO_ACTIVE_LOW), | |
| /* Write protect on GPIO 7 */ | |
| GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP, | |
| "wp", GPIO_ACTIVE_LOW), | |
| /* Power on GPIO 33 */ | |
| GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR, | |
| "power", GPIO_ACTIVE_HIGH), | |
| { }, | |
| }, | |
| }; | |
| /* | |
| * Irda | |
| */ | |
| static struct pxaficp_platform_data corgi_ficp_platform_data = { | |
| .gpio_pwdown = CORGI_GPIO_IR_ON, | |
| .transceiver_cap = IR_SIRMODE | IR_OFF, | |
| }; | |
| /* | |
| * USB Device Controller | |
| */ | |
| static struct pxa2xx_udc_mach_info udc_info __initdata = { | |
| /* no connect GPIO; corgi can't tell connection status */ | |
| .gpio_pullup = CORGI_GPIO_USB_PULLUP, | |
| }; | |
| #if IS_ENABLED(CONFIG_SPI_PXA2XX) | |
| static struct pxa2xx_spi_controller corgi_spi_info = { | |
| .num_chipselect = 3, | |
| }; | |
| static void corgi_wait_for_hsync(void) | |
| { | |
| while (gpio_get_value(CORGI_GPIO_HSYNC)) | |
| cpu_relax(); | |
| while (!gpio_get_value(CORGI_GPIO_HSYNC)) | |
| cpu_relax(); | |
| } | |
| static struct ads7846_platform_data corgi_ads7846_info = { | |
| .model = 7846, | |
| .vref_delay_usecs = 100, | |
| .x_plate_ohms = 419, | |
| .y_plate_ohms = 486, | |
| .gpio_pendown = CORGI_GPIO_TP_INT, | |
| .wait_for_sync = corgi_wait_for_hsync, | |
| }; | |
| static struct pxa2xx_spi_chip corgi_ads7846_chip = { | |
| .gpio_cs = CORGI_GPIO_ADS7846_CS, | |
| }; | |
| static void corgi_bl_kick_battery(void) | |
| { | |
| void (*kick_batt)(void); | |
| kick_batt = symbol_get(sharpsl_battery_kick); | |
| if (kick_batt) { | |
| kick_batt(); | |
| symbol_put(sharpsl_battery_kick); | |
| } | |
| } | |
| static struct gpiod_lookup_table corgi_lcdcon_gpio_table = { | |
| .dev_id = "spi1.1", | |
| .table = { | |
| GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT, | |
| "BL_CONT", GPIO_ACTIVE_HIGH), | |
| { }, | |
| }, | |
| }; | |
| static struct corgi_lcd_platform_data corgi_lcdcon_info = { | |
| .init_mode = CORGI_LCD_MODE_VGA, | |
| .max_intensity = 0x2f, | |
| .default_intensity = 0x1f, | |
| .limit_mask = 0x0b, | |
| .kick_battery = corgi_bl_kick_battery, | |
| }; | |
| static struct pxa2xx_spi_chip corgi_lcdcon_chip = { | |
| .gpio_cs = CORGI_GPIO_LCDCON_CS, | |
| }; | |
| static struct pxa2xx_spi_chip corgi_max1111_chip = { | |
| .gpio_cs = CORGI_GPIO_MAX1111_CS, | |
| }; | |
| static struct spi_board_info corgi_spi_devices[] = { | |
| { | |
| .modalias = "ads7846", | |
| .max_speed_hz = 1200000, | |
| .bus_num = 1, | |
| .chip_select = 0, | |
| .platform_data = &corgi_ads7846_info, | |
| .controller_data= &corgi_ads7846_chip, | |
| .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT), | |
| }, { | |
| .modalias = "corgi-lcd", | |
| .max_speed_hz = 50000, | |
| .bus_num = 1, | |
| .chip_select = 1, | |
| .platform_data = &corgi_lcdcon_info, | |
| .controller_data= &corgi_lcdcon_chip, | |
| }, { | |
| .modalias = "max1111", | |
| .max_speed_hz = 450000, | |
| .bus_num = 1, | |
| .chip_select = 2, | |
| .controller_data= &corgi_max1111_chip, | |
| }, | |
| }; | |
| static void __init corgi_init_spi(void) | |
| { | |
| pxa2xx_set_spi_info(1, &corgi_spi_info); | |
| gpiod_add_lookup_table(&corgi_lcdcon_gpio_table); | |
| spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices)); | |
| } | |
| #else | |
| static inline void corgi_init_spi(void) {} | |
| #endif | |
| static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; | |
| static struct nand_bbt_descr sharpsl_bbt = { | |
| .options = 0, | |
| .offs = 4, | |
| .len = 2, | |
| .pattern = scan_ff_pattern | |
| }; | |
| static const char * const probes[] = { | |
| "cmdlinepart", | |
| "ofpart", | |
| "sharpslpart", | |
| NULL, | |
| }; | |
| static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { | |
| .badblock_pattern = &sharpsl_bbt, | |
| .part_parsers = probes, | |
| }; | |
| static struct resource sharpsl_nand_resources[] = { | |
| { | |
| .start = 0x0C000000, | |
| .end = 0x0C000FFF, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| }; | |
| static struct platform_device sharpsl_nand_device = { | |
| .name = "sharpsl-nand", | |
| .id = -1, | |
| .resource = sharpsl_nand_resources, | |
| .num_resources = ARRAY_SIZE(sharpsl_nand_resources), | |
| .dev.platform_data = &sharpsl_nand_platform_data, | |
| }; | |
| static struct mtd_partition sharpsl_rom_parts[] = { | |
| { | |
| .name ="Boot PROM Filesystem", | |
| .offset = 0x00120000, | |
| .size = MTDPART_SIZ_FULL, | |
| }, | |
| }; | |
| static struct physmap_flash_data sharpsl_rom_data = { | |
| .width = 2, | |
| .nr_parts = ARRAY_SIZE(sharpsl_rom_parts), | |
| .parts = sharpsl_rom_parts, | |
| }; | |
| static struct resource sharpsl_rom_resources[] = { | |
| { | |
| .start = 0x00000000, | |
| .end = 0x007fffff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| }; | |
| static struct platform_device sharpsl_rom_device = { | |
| .name = "physmap-flash", | |
| .id = -1, | |
| .resource = sharpsl_rom_resources, | |
| .num_resources = ARRAY_SIZE(sharpsl_rom_resources), | |
| .dev.platform_data = &sharpsl_rom_data, | |
| }; | |
| static struct platform_device *devices[] __initdata = { | |
| &corgiscoop_device, | |
| &corgifb_device, | |
| &corgi_gpio_keys_device, | |
| &corgikbd_device, | |
| &corgiled_device, | |
| &corgi_audio_device, | |
| &sharpsl_nand_device, | |
| &sharpsl_rom_device, | |
| }; | |
| static struct i2c_board_info __initdata corgi_i2c_devices[] = { | |
| { I2C_BOARD_INFO("wm8731", 0x1b) }, | |
| }; | |
| static void corgi_poweroff(void) | |
| { | |
| if (!machine_is_corgi()) | |
| /* Green LED off tells the bootloader to halt */ | |
| gpio_set_value(CORGI_GPIO_LED_GREEN, 0); | |
| pxa_restart(REBOOT_HARD, NULL); | |
| } | |
| static void corgi_restart(enum reboot_mode mode, const char *cmd) | |
| { | |
| if (!machine_is_corgi()) | |
| /* Green LED on tells the bootloader to reboot */ | |
| gpio_set_value(CORGI_GPIO_LED_GREEN, 1); | |
| pxa_restart(REBOOT_HARD, cmd); | |
| } | |
| static void __init corgi_init(void) | |
| { | |
| pm_power_off = corgi_poweroff; | |
| /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ | |
| PCFR |= PCFR_OPDE; | |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config)); | |
| /* allow wakeup from various GPIOs */ | |
| gpio_set_wake(CORGI_GPIO_KEY_INT, 1); | |
| gpio_set_wake(CORGI_GPIO_WAKEUP, 1); | |
| gpio_set_wake(CORGI_GPIO_AC_IN, 1); | |
| gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1); | |
| if (!machine_is_corgi()) | |
| gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1); | |
| pxa_set_ffuart_info(NULL); | |
| pxa_set_btuart_info(NULL); | |
| pxa_set_stuart_info(NULL); | |
| corgi_init_spi(); | |
| pxa_set_udc_info(&udc_info); | |
| gpiod_add_lookup_table(&corgi_mci_gpio_table); | |
| pxa_set_mci_info(&corgi_mci_platform_data); | |
| pxa_set_ficp_info(&corgi_ficp_platform_data); | |
| pxa_set_i2c_info(NULL); | |
| i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices)); | |
| platform_scoop_config = &corgi_pcmcia_config; | |
| platform_add_devices(devices, ARRAY_SIZE(devices)); | |
| regulator_has_full_constraints(); | |
| } | |
| static void __init fixup_corgi(struct tag *tags, char **cmdline) | |
| { | |
| sharpsl_save_param(); | |
| if (machine_is_corgi()) | |
| memblock_add(0xa0000000, SZ_32M); | |
| else | |
| memblock_add(0xa0000000, SZ_64M); | |
| } | |
| #ifdef CONFIG_MACH_CORGI | |
| MACHINE_START(CORGI, "SHARP Corgi") | |
| .fixup = fixup_corgi, | |
| .map_io = pxa25x_map_io, | |
| .nr_irqs = PXA_NR_IRQS, | |
| .init_irq = pxa25x_init_irq, | |
| .handle_irq = pxa25x_handle_irq, | |
| .init_machine = corgi_init, | |
| .init_time = pxa_timer_init, | |
| .restart = corgi_restart, | |
| MACHINE_END | |
| #endif | |
| #ifdef CONFIG_MACH_SHEPHERD | |
| MACHINE_START(SHEPHERD, "SHARP Shepherd") | |
| .fixup = fixup_corgi, | |
| .map_io = pxa25x_map_io, | |
| .nr_irqs = PXA_NR_IRQS, | |
| .init_irq = pxa25x_init_irq, | |
| .handle_irq = pxa25x_handle_irq, | |
| .init_machine = corgi_init, | |
| .init_time = pxa_timer_init, | |
| .restart = corgi_restart, | |
| MACHINE_END | |
| #endif | |
| #ifdef CONFIG_MACH_HUSKY | |
| MACHINE_START(HUSKY, "SHARP Husky") | |
| .fixup = fixup_corgi, | |
| .map_io = pxa25x_map_io, | |
| .nr_irqs = PXA_NR_IRQS, | |
| .init_irq = pxa25x_init_irq, | |
| .handle_irq = pxa25x_handle_irq, | |
| .init_machine = corgi_init, | |
| .init_time = pxa_timer_init, | |
| .restart = corgi_restart, | |
| MACHINE_END | |
| #endif | |