| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation | |
| * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) | |
| */ | |
| /* | |
| * Setup code for the SWARM board | |
| */ | |
| #include <linux/spinlock.h> | |
| #include <linux/mm.h> | |
| #include <linux/memblock.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/screen_info.h> | |
| #include <linux/initrd.h> | |
| #include <asm/irq.h> | |
| #include <asm/io.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/reboot.h> | |
| #include <asm/time.h> | |
| #include <asm/traps.h> | |
| #include <asm/sibyte/sb1250.h> | |
| #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) | |
| #include <asm/sibyte/bcm1480_regs.h> | |
| #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) | |
| #include <asm/sibyte/sb1250_regs.h> | |
| #else | |
| #error invalid SiByte board configuration | |
| #endif | |
| #include <asm/sibyte/sb1250_genbus.h> | |
| #include <asm/sibyte/board.h> | |
| #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) | |
| extern void bcm1480_setup(void); | |
| #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) | |
| extern void sb1250_setup(void); | |
| #else | |
| #error invalid SiByte board configuration | |
| #endif | |
| extern int xicor_probe(void); | |
| extern int xicor_set_time(time64_t); | |
| extern time64_t xicor_get_time(void); | |
| extern int m41t81_probe(void); | |
| extern int m41t81_set_time(time64_t); | |
| extern time64_t m41t81_get_time(void); | |
| const char *get_system_type(void) | |
| { | |
| return "SiByte " SIBYTE_BOARD_NAME; | |
| } | |
| int swarm_be_handler(struct pt_regs *regs, int is_fixup) | |
| { | |
| if (!is_fixup && (regs->cp0_cause & 4)) { | |
| /* Data bus error - print PA */ | |
| printk("DBE physical address: %010Lx\n", | |
| __read_64bit_c0_register($26, 1)); | |
| } | |
| return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; | |
| } | |
| enum swarm_rtc_type { | |
| RTC_NONE, | |
| RTC_XICOR, | |
| RTC_M41T81, | |
| }; | |
| enum swarm_rtc_type swarm_rtc_type; | |
| void read_persistent_clock64(struct timespec64 *ts) | |
| { | |
| time64_t sec; | |
| switch (swarm_rtc_type) { | |
| case RTC_XICOR: | |
| sec = xicor_get_time(); | |
| break; | |
| case RTC_M41T81: | |
| sec = m41t81_get_time(); | |
| break; | |
| case RTC_NONE: | |
| default: | |
| sec = mktime64(2000, 1, 1, 0, 0, 0); | |
| break; | |
| } | |
| ts->tv_sec = sec; | |
| ts->tv_nsec = 0; | |
| } | |
| int update_persistent_clock64(struct timespec64 now) | |
| { | |
| time64_t sec = now.tv_sec; | |
| switch (swarm_rtc_type) { | |
| case RTC_XICOR: | |
| return xicor_set_time(sec); | |
| case RTC_M41T81: | |
| return m41t81_set_time(sec); | |
| case RTC_NONE: | |
| default: | |
| return -1; | |
| } | |
| } | |
| void __init plat_mem_setup(void) | |
| { | |
| #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) | |
| bcm1480_setup(); | |
| #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) | |
| sb1250_setup(); | |
| #else | |
| #error invalid SiByte board configuration | |
| #endif | |
| board_be_handler = swarm_be_handler; | |
| if (xicor_probe()) | |
| swarm_rtc_type = RTC_XICOR; | |
| if (m41t81_probe()) | |
| swarm_rtc_type = RTC_M41T81; | |
| #ifdef CONFIG_VT | |
| screen_info = (struct screen_info) { | |
| .orig_video_page = 52, | |
| .orig_video_mode = 3, | |
| .orig_video_cols = 80, | |
| .flags = 12, | |
| .orig_video_ega_bx = 3, | |
| .orig_video_lines = 25, | |
| .orig_video_isVGA = 0x22, | |
| .orig_video_points = 16, | |
| }; | |
| /* XXXKW for CFE, get lines/cols from environment */ | |
| #endif | |
| } | |
| #ifdef LEDS_PHYS | |
| #ifdef CONFIG_SIBYTE_CARMEL | |
| /* XXXKW need to detect Monterey/LittleSur/etc */ | |
| #undef LEDS_PHYS | |
| #define LEDS_PHYS MLEDS_PHYS | |
| #endif | |
| void setleds(char *str) | |
| { | |
| void *reg; | |
| int i; | |
| for (i = 0; i < 4; i++) { | |
| reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3); | |
| if (!str[i]) | |
| writeb(' ', reg); | |
| else | |
| writeb(str[i], reg); | |
| } | |
| } | |
| #endif /* LEDS_PHYS */ |