drivers/hwtracing/coresight/Kconfig - linux - Git at Google


            
            # SPDX-License-Identifier: GPL-2.0-only

            
            #

            
            # Coresight configuration

            
            #

            
            menuconfig CORESIGHT

            
            	tristate "CoreSight Tracing Support"

            
            	depends on ARM || ARM64

            
            	depends on OF || ACPI

            
            	select ARM_AMBA

            
            	select PERF_EVENTS

            
            	select CONFIGFS_FS

            
            	help

            
            	  This framework provides a kernel interface for the CoreSight debug

            
            	  and trace drivers to register themselves with. It's intended to build

            
            	  a topological view of the CoreSight components based on a DT

            
            	  specification and configure the right series of components when a

            
            	  trace source gets enabled.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight.


            if CORESIGHT

            
            config CORESIGHT_LINKS_AND_SINKS

            
            	tristate "CoreSight Link and Sink drivers"

            
            	help

            
            	  This enables support for CoreSight link and sink drivers that are

            
            	  responsible for transporting and collecting the trace data

            
            	  respectively.  Link and sinks are dynamically aggregated with a trace

            
            	  entity at run time to form a complete trace path.


            	  To compile these drivers as modules, choose M here: the

            
            	  modules will be called coresight-funnel and coresight-replicator.


            config CORESIGHT_LINK_AND_SINK_TMC

            
            	tristate "Coresight generic TMC driver"


            	depends on CORESIGHT_LINKS_AND_SINKS

            
            	help

            
            	  This enables support for the Trace Memory Controller driver.

            
            	  Depending on its configuration the device can act as a link (embedded

            
            	  trace router - ETR) or sink (embedded trace FIFO).  The driver

            
            	  complies with the generic implementation of the component without

            
            	  special enhancement or added features.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-tmc.


            config CORESIGHT_CATU

            
            	tristate "Coresight Address Translation Unit (CATU) driver"

            
            	depends on CORESIGHT_LINK_AND_SINK_TMC

            
            	help

            
            	   Enable support for the Coresight Address Translation Unit (CATU).

            
            	   CATU supports a scatter gather table of 4K pages, with forward/backward

            
            	   lookup. CATU helps TMC ETR to use a large physically non-contiguous trace

            
            	   buffer by translating the addresses used by ETR to the physical address

            
            	   by looking up the provided table. CATU can also be used in pass-through

            
            	   mode where the address is not translated.


            	   To compile this driver as a module, choose M here: the

            
            	   module will be called coresight-catu.


            config CORESIGHT_SINK_TPIU

            
            	tristate "Coresight generic TPIU driver"

            
            	depends on CORESIGHT_LINKS_AND_SINKS

            
            	help

            
            	  This enables support for the Trace Port Interface Unit driver,

            
            	  responsible for bridging the gap between the on-chip coresight

            
            	  components and a trace for bridging the gap between the on-chip

            
            	  coresight components and a trace port collection engine, typically

            
            	  connected to an external host for use case capturing more traces than

            
            	  the on-board coresight memory can handle.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-tpiu.


            config CORESIGHT_SINK_ETBV10

            
            	tristate "Coresight ETBv1.0 driver"

            
            	depends on CORESIGHT_LINKS_AND_SINKS

            
            	help

            
            	  This enables support for the Embedded Trace Buffer version 1.0 driver

            
            	  that complies with the generic implementation of the component without

            
            	  special enhancement or added features.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-etb10.


            config CORESIGHT_SOURCE_ETM3X

            
            	tristate "CoreSight Embedded Trace Macrocell 3.x driver"

            
            	depends on !ARM64

            
            	select CORESIGHT_LINKS_AND_SINKS

            
            	help

            
            	  This driver provides support for processor ETM3.x and PTM1.x modules,

            
            	  which allows tracing the instructions that a processor is executing

            
            	  This is primarily useful for instruction level tracing.  Depending

            
            	  the ETM version data tracing may also be available.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-etm3x.


            config CORESIGHT_SOURCE_ETM4X

            
            	tristate "CoreSight ETMv4.x / ETE driver"

            
            	depends on ARM64

            
            	select CORESIGHT_LINKS_AND_SINKS

            
            	select PID_IN_CONTEXTIDR

            
            	help

            
            	  This driver provides support for the CoreSight Embedded Trace Macrocell

            
            	  version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer

            
            	  modules, tracing the instructions that a processor is executing. This is

            
            	  primarily useful for instruction level tracing.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-etm4x.


            config ETM4X_IMPDEF_FEATURE

            
            	bool "Control implementation defined overflow support in ETM 4.x driver"

            
            	depends on CORESIGHT_SOURCE_ETM4X

            
            	help

            
            	  This control provides implementation define control for CoreSight

            
            	  ETM 4.x tracer module that can't reduce commit rate automatically.

            
            	  This avoids overflow between the ETM tracer module and the cpu core.


            config CORESIGHT_STM

            
            	tristate "CoreSight System Trace Macrocell driver"

            
            	depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64

            
            	select CORESIGHT_LINKS_AND_SINKS

            
            	select STM

            
            	help

            
            	  This driver provides support for hardware assisted software

            
            	  instrumentation based tracing. This is primarily used for

            
            	  logging useful software events or data coming from various entities

            
            	  in the system, possibly running different OSs


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-stm.


            config CORESIGHT_CPU_DEBUG

            
            	tristate "CoreSight CPU Debug driver"

            
            	depends on ARM || ARM64

            
            	depends on DEBUG_FS

            
            	help

            
            	  This driver provides support for coresight debugging module. This

            
            	  is primarily used to dump sample-based profiling registers when

            
            	  system triggers panic, the driver will parse context registers so

            
            	  can quickly get to know program counter (PC), secure state,

            
            	  exception level, etc. Before use debugging functionality, platform

            
            	  needs to ensure the clock domain and power domain are enabled

            
            	  properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst

            
            	  for detailed description and the example for usage.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-cpu-debug.


            config CORESIGHT_CPU_DEBUG_DEFAULT_ON

            
            	bool "Enable CoreSight CPU Debug by default"

            
            	depends on CORESIGHT_CPU_DEBUG

            
            	help

            
            	  Say Y here to enable the CoreSight Debug panic-debug by default. This

            
            	  can also be enabled via debugfs, but this ensures the debug feature

            
            	  is enabled as early as possible.


            	  Has the same effect as setting coresight_cpu_debug.enable=1 on the

            
            	  kernel command line.


            	  Say N if unsure.


            config CORESIGHT_CTI

            
            	tristate "CoreSight Cross Trigger Interface (CTI) driver"

            
            	depends on ARM || ARM64

            
            	help

            
            	  This driver provides support for CoreSight CTI and CTM components.

            
            	  These provide hardware triggering events between CoreSight trace

            
            	  source and sink components. These can be used to halt trace or

            
            	  inject events into the trace stream. CTI also provides a software

            
            	  control to trigger the same halt events. This can provide fast trace

            
            	  halt compared to disabling sources and sinks normally in driver

            
            	  software.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called coresight-cti.


            config CORESIGHT_CTI_INTEGRATION_REGS

            
            	bool "Access CTI CoreSight Integration Registers"

            
            	depends on CORESIGHT_CTI

            
            	help

            
            	  This option adds support for the CoreSight integration registers on

            
            	  this device. The integration registers allow the exploration of the

            
            	  CTI trigger connections between this and other devices.These

            
            	  registers are not used in normal operation and can leave devices in

            
            	  an inconsistent state.


            config CORESIGHT_TRBE

            
            	tristate "Trace Buffer Extension (TRBE) driver"

            
            	depends on ARM64 && CORESIGHT_SOURCE_ETM4X

            
            	help

            
            	  This driver provides support for percpu Trace Buffer Extension (TRBE).

            
            	  TRBE always needs to be used along with it's corresponding percpu ETE

            
            	  component. ETE generates trace data which is then captured with TRBE.

            
            	  Unlike traditional sink devices, TRBE is a CPU feature accessible via

            
            	  system registers. But it's explicit dependency with trace unit (ETE)

            
            	  requires it to be plugged in as a coresight sink device.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called coresight-trbe.

            
            endif
	# SPDX-License-Identifier: GPL-2.0-only
	#
	# Coresight configuration
	#
	menuconfig CORESIGHT
	tristate "CoreSight Tracing Support"
	depends on ARM \|\| ARM64
	depends on OF \|\| ACPI
	select ARM_AMBA
	select PERF_EVENTS
	select CONFIGFS_FS
	help
	This framework provides a kernel interface for the CoreSight debug
	and trace drivers to register themselves with. It's intended to build
	a topological view of the CoreSight components based on a DT
	specification and configure the right series of components when a
	trace source gets enabled.

	To compile this driver as a module, choose M here: the
	module will be called coresight.

	if CORESIGHT
	config CORESIGHT_LINKS_AND_SINKS
	tristate "CoreSight Link and Sink drivers"
	help
	This enables support for CoreSight link and sink drivers that are
	responsible for transporting and collecting the trace data
	respectively. Link and sinks are dynamically aggregated with a trace
	entity at run time to form a complete trace path.

	To compile these drivers as modules, choose M here: the
	modules will be called coresight-funnel and coresight-replicator.

	config CORESIGHT_LINK_AND_SINK_TMC
	tristate "Coresight generic TMC driver"

	depends on CORESIGHT_LINKS_AND_SINKS
	help
	This enables support for the Trace Memory Controller driver.
	Depending on its configuration the device can act as a link (embedded
	trace router - ETR) or sink (embedded trace FIFO). The driver
	complies with the generic implementation of the component without
	special enhancement or added features.

	To compile this driver as a module, choose M here: the
	module will be called coresight-tmc.

	config CORESIGHT_CATU
	tristate "Coresight Address Translation Unit (CATU) driver"
	depends on CORESIGHT_LINK_AND_SINK_TMC
	help
	Enable support for the Coresight Address Translation Unit (CATU).
	CATU supports a scatter gather table of 4K pages, with forward/backward
	lookup. CATU helps TMC ETR to use a large physically non-contiguous trace
	buffer by translating the addresses used by ETR to the physical address
	by looking up the provided table. CATU can also be used in pass-through
	mode where the address is not translated.

	To compile this driver as a module, choose M here: the
	module will be called coresight-catu.

	config CORESIGHT_SINK_TPIU
	tristate "Coresight generic TPIU driver"
	depends on CORESIGHT_LINKS_AND_SINKS
	help
	This enables support for the Trace Port Interface Unit driver,
	responsible for bridging the gap between the on-chip coresight
	components and a trace for bridging the gap between the on-chip
	coresight components and a trace port collection engine, typically
	connected to an external host for use case capturing more traces than
	the on-board coresight memory can handle.

	To compile this driver as a module, choose M here: the
	module will be called coresight-tpiu.

	config CORESIGHT_SINK_ETBV10
	tristate "Coresight ETBv1.0 driver"
	depends on CORESIGHT_LINKS_AND_SINKS
	help
	This enables support for the Embedded Trace Buffer version 1.0 driver
	that complies with the generic implementation of the component without
	special enhancement or added features.

	To compile this driver as a module, choose M here: the
	module will be called coresight-etb10.

	config CORESIGHT_SOURCE_ETM3X
	tristate "CoreSight Embedded Trace Macrocell 3.x driver"
	depends on !ARM64
	select CORESIGHT_LINKS_AND_SINKS
	help
	This driver provides support for processor ETM3.x and PTM1.x modules,
	which allows tracing the instructions that a processor is executing
	This is primarily useful for instruction level tracing. Depending
	the ETM version data tracing may also be available.

	To compile this driver as a module, choose M here: the
	module will be called coresight-etm3x.

	config CORESIGHT_SOURCE_ETM4X
	tristate "CoreSight ETMv4.x / ETE driver"
	depends on ARM64
	select CORESIGHT_LINKS_AND_SINKS
	select PID_IN_CONTEXTIDR
	help
	This driver provides support for the CoreSight Embedded Trace Macrocell
	version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer
	modules, tracing the instructions that a processor is executing. This is
	primarily useful for instruction level tracing.

	To compile this driver as a module, choose M here: the
	module will be called coresight-etm4x.

	config ETM4X_IMPDEF_FEATURE
	bool "Control implementation defined overflow support in ETM 4.x driver"
	depends on CORESIGHT_SOURCE_ETM4X
	help
	This control provides implementation define control for CoreSight
	ETM 4.x tracer module that can't reduce commit rate automatically.
	This avoids overflow between the ETM tracer module and the cpu core.

	config CORESIGHT_STM
	tristate "CoreSight System Trace Macrocell driver"
	depends on (ARM && !(CPU_32v3 \|\| CPU_32v4 \|\| CPU_32v4T)) \|\| ARM64
	select CORESIGHT_LINKS_AND_SINKS
	select STM
	help
	This driver provides support for hardware assisted software
	instrumentation based tracing. This is primarily used for
	logging useful software events or data coming from various entities
	in the system, possibly running different OSs

	To compile this driver as a module, choose M here: the
	module will be called coresight-stm.

	config CORESIGHT_CPU_DEBUG
	tristate "CoreSight CPU Debug driver"
	depends on ARM \|\| ARM64
	depends on DEBUG_FS
	help
	This driver provides support for coresight debugging module. This
	is primarily used to dump sample-based profiling registers when
	system triggers panic, the driver will parse context registers so
	can quickly get to know program counter (PC), secure state,
	exception level, etc. Before use debugging functionality, platform
	needs to ensure the clock domain and power domain are enabled
	properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
	for detailed description and the example for usage.

	To compile this driver as a module, choose M here: the
	module will be called coresight-cpu-debug.

	config CORESIGHT_CPU_DEBUG_DEFAULT_ON
	bool "Enable CoreSight CPU Debug by default"
	depends on CORESIGHT_CPU_DEBUG
	help
	Say Y here to enable the CoreSight Debug panic-debug by default. This
	can also be enabled via debugfs, but this ensures the debug feature
	is enabled as early as possible.

	Has the same effect as setting coresight_cpu_debug.enable=1 on the
	kernel command line.

	Say N if unsure.

	config CORESIGHT_CTI
	tristate "CoreSight Cross Trigger Interface (CTI) driver"
	depends on ARM \|\| ARM64
	help
	This driver provides support for CoreSight CTI and CTM components.
	These provide hardware triggering events between CoreSight trace
	source and sink components. These can be used to halt trace or
	inject events into the trace stream. CTI also provides a software
	control to trigger the same halt events. This can provide fast trace
	halt compared to disabling sources and sinks normally in driver
	software.

	To compile this driver as a module, choose M here: the
	module will be called coresight-cti.

	config CORESIGHT_CTI_INTEGRATION_REGS
	bool "Access CTI CoreSight Integration Registers"
	depends on CORESIGHT_CTI
	help
	This option adds support for the CoreSight integration registers on
	this device. The integration registers allow the exploration of the
	CTI trigger connections between this and other devices.These
	registers are not used in normal operation and can leave devices in
	an inconsistent state.

	config CORESIGHT_TRBE
	tristate "Trace Buffer Extension (TRBE) driver"
	depends on ARM64 && CORESIGHT_SOURCE_ETM4X
	help
	This driver provides support for percpu Trace Buffer Extension (TRBE).
	TRBE always needs to be used along with it's corresponding percpu ETE
	component. ETE generates trace data which is then captured with TRBE.
	Unlike traditional sink devices, TRBE is a CPU feature accessible via
	system registers. But it's explicit dependency with trace unit (ETE)
	requires it to be plugged in as a coresight sink device.

	To compile this driver as a module, choose M here: the module will be
	called coresight-trbe.
	endif