| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright 2016-2019 HabanaLabs, Ltd. | |
| * All Rights Reserved. | |
| */ | |
| #include "habanalabs.h" | |
| #include <linux/pci.h> | |
| long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr) | |
| { | |
| struct cpucp_packet pkt; | |
| u32 used_pll_idx; | |
| u64 result; | |
| int rc; | |
| rc = get_used_pll_index(hdev, pll_index, &used_pll_idx); | |
| if (rc) | |
| return rc; | |
| memset(&pkt, 0, sizeof(pkt)); | |
| if (curr) | |
| pkt.ctl = cpu_to_le32(CPUCP_PACKET_FREQUENCY_CURR_GET << | |
| CPUCP_PKT_CTL_OPCODE_SHIFT); | |
| else | |
| pkt.ctl = cpu_to_le32(CPUCP_PACKET_FREQUENCY_GET << | |
| CPUCP_PKT_CTL_OPCODE_SHIFT); | |
| pkt.pll_index = cpu_to_le32((u32)used_pll_idx); | |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), | |
| 0, &result); | |
| if (rc) { | |
| dev_err(hdev->dev, | |
| "Failed to get frequency of PLL %d, error %d\n", | |
| used_pll_idx, rc); | |
| return rc; | |
| } | |
| return (long) result; | |
| } | |
| void hl_set_frequency(struct hl_device *hdev, u32 pll_index, u64 freq) | |
| { | |
| struct cpucp_packet pkt; | |
| u32 used_pll_idx; | |
| int rc; | |
| rc = get_used_pll_index(hdev, pll_index, &used_pll_idx); | |
| if (rc) | |
| return; | |
| memset(&pkt, 0, sizeof(pkt)); | |
| pkt.ctl = cpu_to_le32(CPUCP_PACKET_FREQUENCY_SET << | |
| CPUCP_PKT_CTL_OPCODE_SHIFT); | |
| pkt.pll_index = cpu_to_le32((u32)used_pll_idx); | |
| pkt.value = cpu_to_le64(freq); | |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), | |
| 0, NULL); | |
| if (rc) | |
| dev_err(hdev->dev, | |
| "Failed to set frequency to PLL %d, error %d\n", | |
| used_pll_idx, rc); | |
| } | |
| u64 hl_get_max_power(struct hl_device *hdev) | |
| { | |
| struct cpucp_packet pkt; | |
| u64 result; | |
| int rc; | |
| memset(&pkt, 0, sizeof(pkt)); | |
| pkt.ctl = cpu_to_le32(CPUCP_PACKET_MAX_POWER_GET << | |
| CPUCP_PKT_CTL_OPCODE_SHIFT); | |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), | |
| 0, &result); | |
| if (rc) { | |
| dev_err(hdev->dev, "Failed to get max power, error %d\n", rc); | |
| return (u64) rc; | |
| } | |
| return result; | |
| } | |
| void hl_set_max_power(struct hl_device *hdev) | |
| { | |
| struct cpucp_packet pkt; | |
| int rc; | |
| memset(&pkt, 0, sizeof(pkt)); | |
| pkt.ctl = cpu_to_le32(CPUCP_PACKET_MAX_POWER_SET << | |
| CPUCP_PKT_CTL_OPCODE_SHIFT); | |
| pkt.value = cpu_to_le64(hdev->max_power); | |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), | |
| 0, NULL); | |
| if (rc) | |
| dev_err(hdev->dev, "Failed to set max power, error %d\n", rc); | |
| } | |
| static ssize_t uboot_ver_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s\n", hdev->asic_prop.uboot_ver); | |
| } | |
| static ssize_t armcp_kernel_ver_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s", hdev->asic_prop.cpucp_info.kernel_version); | |
| } | |
| static ssize_t armcp_ver_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s\n", hdev->asic_prop.cpucp_info.cpucp_version); | |
| } | |
| static ssize_t cpld_ver_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "0x%08x\n", | |
| hdev->asic_prop.cpucp_info.cpld_version); | |
| } | |
| static ssize_t cpucp_kernel_ver_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s", hdev->asic_prop.cpucp_info.kernel_version); | |
| } | |
| static ssize_t cpucp_ver_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s\n", hdev->asic_prop.cpucp_info.cpucp_version); | |
| } | |
| static ssize_t infineon_ver_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "0x%04x\n", | |
| hdev->asic_prop.cpucp_info.infineon_version); | |
| } | |
| static ssize_t fuse_ver_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s\n", hdev->asic_prop.cpucp_info.fuse_version); | |
| } | |
| static ssize_t thermal_ver_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s", hdev->asic_prop.cpucp_info.thermal_version); | |
| } | |
| static ssize_t preboot_btl_ver_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s\n", hdev->asic_prop.preboot_ver); | |
| } | |
| static ssize_t soft_reset_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, | |
| size_t count) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| long value; | |
| int rc; | |
| rc = kstrtoul(buf, 0, &value); | |
| if (rc) { | |
| count = -EINVAL; | |
| goto out; | |
| } | |
| if (!hdev->allow_external_soft_reset) { | |
| dev_err(hdev->dev, "Device does not support soft-reset\n"); | |
| goto out; | |
| } | |
| dev_warn(hdev->dev, "Soft-Reset requested through sysfs\n"); | |
| hl_device_reset(hdev, 0); | |
| out: | |
| return count; | |
| } | |
| static ssize_t hard_reset_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| long value; | |
| int rc; | |
| rc = kstrtoul(buf, 0, &value); | |
| if (rc) { | |
| count = -EINVAL; | |
| goto out; | |
| } | |
| dev_warn(hdev->dev, "Hard-Reset requested through sysfs\n"); | |
| hl_device_reset(hdev, HL_RESET_HARD); | |
| out: | |
| return count; | |
| } | |
| static ssize_t device_type_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| char *str; | |
| switch (hdev->asic_type) { | |
| case ASIC_GOYA: | |
| str = "GOYA"; | |
| break; | |
| case ASIC_GAUDI: | |
| str = "GAUDI"; | |
| break; | |
| case ASIC_GAUDI_SEC: | |
| str = "GAUDI SEC"; | |
| break; | |
| default: | |
| dev_err(hdev->dev, "Unrecognized ASIC type %d\n", | |
| hdev->asic_type); | |
| return -EINVAL; | |
| } | |
| return sprintf(buf, "%s\n", str); | |
| } | |
| static ssize_t pci_addr_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%04x:%02x:%02x.%x\n", | |
| pci_domain_nr(hdev->pdev->bus), | |
| hdev->pdev->bus->number, | |
| PCI_SLOT(hdev->pdev->devfn), | |
| PCI_FUNC(hdev->pdev->devfn)); | |
| } | |
| static ssize_t status_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| char str[HL_STR_MAX]; | |
| strscpy(str, hdev->status[hl_device_status(hdev)], HL_STR_MAX); | |
| /* use uppercase for backward compatibility */ | |
| str[0] = 'A' + (str[0] - 'a'); | |
| return sprintf(buf, "%s\n", str); | |
| } | |
| static ssize_t soft_reset_cnt_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%d\n", hdev->soft_reset_cnt); | |
| } | |
| static ssize_t hard_reset_cnt_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| return sprintf(buf, "%d\n", hdev->hard_reset_cnt); | |
| } | |
| static ssize_t max_power_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| long val; | |
| if (!hl_device_operational(hdev, NULL)) | |
| return -ENODEV; | |
| val = hl_get_max_power(hdev); | |
| return sprintf(buf, "%lu\n", val); | |
| } | |
| static ssize_t max_power_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| unsigned long value; | |
| int rc; | |
| if (!hl_device_operational(hdev, NULL)) { | |
| count = -ENODEV; | |
| goto out; | |
| } | |
| rc = kstrtoul(buf, 0, &value); | |
| if (rc) { | |
| count = -EINVAL; | |
| goto out; | |
| } | |
| hdev->max_power = value; | |
| hl_set_max_power(hdev); | |
| out: | |
| return count; | |
| } | |
| static ssize_t eeprom_read_handler(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, char *buf, loff_t offset, | |
| size_t max_size) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct hl_device *hdev = dev_get_drvdata(dev); | |
| char *data; | |
| int rc; | |
| if (!hl_device_operational(hdev, NULL)) | |
| return -ENODEV; | |
| if (!max_size) | |
| return -EINVAL; | |
| data = kzalloc(max_size, GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| rc = hdev->asic_funcs->get_eeprom_data(hdev, data, max_size); | |
| if (rc) | |
| goto out; | |
| memcpy(buf, data, max_size); | |
| out: | |
| kfree(data); | |
| return max_size; | |
| } | |
| static DEVICE_ATTR_RO(armcp_kernel_ver); | |
| static DEVICE_ATTR_RO(armcp_ver); | |
| static DEVICE_ATTR_RO(cpld_ver); | |
| static DEVICE_ATTR_RO(cpucp_kernel_ver); | |
| static DEVICE_ATTR_RO(cpucp_ver); | |
| static DEVICE_ATTR_RO(device_type); | |
| static DEVICE_ATTR_RO(fuse_ver); | |
| static DEVICE_ATTR_WO(hard_reset); | |
| static DEVICE_ATTR_RO(hard_reset_cnt); | |
| static DEVICE_ATTR_RO(infineon_ver); | |
| static DEVICE_ATTR_RW(max_power); | |
| static DEVICE_ATTR_RO(pci_addr); | |
| static DEVICE_ATTR_RO(preboot_btl_ver); | |
| static DEVICE_ATTR_WO(soft_reset); | |
| static DEVICE_ATTR_RO(soft_reset_cnt); | |
| static DEVICE_ATTR_RO(status); | |
| static DEVICE_ATTR_RO(thermal_ver); | |
| static DEVICE_ATTR_RO(uboot_ver); | |
| static struct bin_attribute bin_attr_eeprom = { | |
| .attr = {.name = "eeprom", .mode = (0444)}, | |
| .size = PAGE_SIZE, | |
| .read = eeprom_read_handler | |
| }; | |
| static struct attribute *hl_dev_attrs[] = { | |
| &dev_attr_armcp_kernel_ver.attr, | |
| &dev_attr_armcp_ver.attr, | |
| &dev_attr_cpld_ver.attr, | |
| &dev_attr_cpucp_kernel_ver.attr, | |
| &dev_attr_cpucp_ver.attr, | |
| &dev_attr_device_type.attr, | |
| &dev_attr_fuse_ver.attr, | |
| &dev_attr_hard_reset.attr, | |
| &dev_attr_hard_reset_cnt.attr, | |
| &dev_attr_infineon_ver.attr, | |
| &dev_attr_max_power.attr, | |
| &dev_attr_pci_addr.attr, | |
| &dev_attr_preboot_btl_ver.attr, | |
| &dev_attr_soft_reset.attr, | |
| &dev_attr_soft_reset_cnt.attr, | |
| &dev_attr_status.attr, | |
| &dev_attr_thermal_ver.attr, | |
| &dev_attr_uboot_ver.attr, | |
| NULL, | |
| }; | |
| static struct bin_attribute *hl_dev_bin_attrs[] = { | |
| &bin_attr_eeprom, | |
| NULL | |
| }; | |
| static struct attribute_group hl_dev_attr_group = { | |
| .attrs = hl_dev_attrs, | |
| .bin_attrs = hl_dev_bin_attrs, | |
| }; | |
| static struct attribute_group hl_dev_clks_attr_group; | |
| static const struct attribute_group *hl_dev_attr_groups[] = { | |
| &hl_dev_attr_group, | |
| &hl_dev_clks_attr_group, | |
| NULL, | |
| }; | |
| int hl_sysfs_init(struct hl_device *hdev) | |
| { | |
| int rc; | |
| if (hdev->asic_type == ASIC_GOYA) | |
| hdev->pm_mng_profile = PM_AUTO; | |
| else | |
| hdev->pm_mng_profile = PM_MANUAL; | |
| hdev->max_power = hdev->asic_prop.max_power_default; | |
| hdev->asic_funcs->add_device_attr(hdev, &hl_dev_clks_attr_group); | |
| rc = device_add_groups(hdev->dev, hl_dev_attr_groups); | |
| if (rc) { | |
| dev_err(hdev->dev, | |
| "Failed to add groups to device, error %d\n", rc); | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| void hl_sysfs_fini(struct hl_device *hdev) | |
| { | |
| device_remove_groups(hdev->dev, hl_dev_attr_groups); | |
| } |