| // SPDX-License-Identifier: GPL-2.0-only | |
| // Copyright (c) 2020 Intel Corporation | |
| /* | |
| * sof_sdw_rt1308 - Helpers to handle RT1308 from generic machine driver | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/errno.h> | |
| #include <sound/control.h> | |
| #include <sound/soc.h> | |
| #include <sound/soc-acpi.h> | |
| #include <sound/soc-dapm.h> | |
| #include "sof_sdw_common.h" | |
| #include "../../codecs/rt1308.h" | |
| static const struct snd_soc_dapm_widget rt1308_widgets[] = { | |
| SND_SOC_DAPM_SPK("Speaker", NULL), | |
| }; | |
| /* | |
| * dapm routes for rt1308 will be registered dynamically according | |
| * to the number of rt1308 used. The first two entries will be registered | |
| * for one codec case, and the last two entries are also registered | |
| * if two 1308s are used. | |
| */ | |
| static const struct snd_soc_dapm_route rt1308_map[] = { | |
| { "Speaker", NULL, "rt1308-1 SPOL" }, | |
| { "Speaker", NULL, "rt1308-1 SPOR" }, | |
| { "Speaker", NULL, "rt1308-2 SPOL" }, | |
| { "Speaker", NULL, "rt1308-2 SPOR" }, | |
| }; | |
| static const struct snd_kcontrol_new rt1308_controls[] = { | |
| SOC_DAPM_PIN_SWITCH("Speaker"), | |
| }; | |
| static int first_spk_init(struct snd_soc_pcm_runtime *rtd) | |
| { | |
| struct snd_soc_card *card = rtd->card; | |
| int ret; | |
| card->components = devm_kasprintf(card->dev, GFP_KERNEL, | |
| "%s spk:rt1308", | |
| card->components); | |
| if (!card->components) | |
| return -ENOMEM; | |
| ret = snd_soc_add_card_controls(card, rt1308_controls, | |
| ARRAY_SIZE(rt1308_controls)); | |
| if (ret) { | |
| dev_err(card->dev, "rt1308 controls addition failed: %d\n", ret); | |
| return ret; | |
| } | |
| ret = snd_soc_dapm_new_controls(&card->dapm, rt1308_widgets, | |
| ARRAY_SIZE(rt1308_widgets)); | |
| if (ret) { | |
| dev_err(card->dev, "rt1308 widgets addition failed: %d\n", ret); | |
| return ret; | |
| } | |
| ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_map, 2); | |
| if (ret) | |
| dev_err(rtd->dev, "failed to add first SPK map: %d\n", ret); | |
| return ret; | |
| } | |
| static int second_spk_init(struct snd_soc_pcm_runtime *rtd) | |
| { | |
| struct snd_soc_card *card = rtd->card; | |
| int ret; | |
| ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_map + 2, 2); | |
| if (ret) | |
| dev_err(rtd->dev, "failed to add second SPK map: %d\n", ret); | |
| return ret; | |
| } | |
| static int all_spk_init(struct snd_soc_pcm_runtime *rtd) | |
| { | |
| int ret; | |
| ret = first_spk_init(rtd); | |
| if (ret) | |
| return ret; | |
| return second_spk_init(rtd); | |
| } | |
| static int rt1308_i2s_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *params) | |
| { | |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); | |
| struct snd_soc_card *card = rtd->card; | |
| struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); | |
| int clk_id, clk_freq, pll_out; | |
| int err; | |
| clk_id = RT1308_PLL_S_MCLK; | |
| clk_freq = 38400000; | |
| pll_out = params_rate(params) * 512; | |
| /* Set rt1308 pll */ | |
| err = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, pll_out); | |
| if (err < 0) { | |
| dev_err(card->dev, "Failed to set RT1308 PLL: %d\n", err); | |
| return err; | |
| } | |
| /* Set rt1308 sysclk */ | |
| err = snd_soc_dai_set_sysclk(codec_dai, RT1308_FS_SYS_S_PLL, pll_out, | |
| SND_SOC_CLOCK_IN); | |
| if (err < 0) { | |
| dev_err(card->dev, "Failed to set RT1308 SYSCLK: %d\n", err); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /* machine stream operations */ | |
| struct snd_soc_ops sof_sdw_rt1308_i2s_ops = { | |
| .hw_params = rt1308_i2s_hw_params, | |
| }; | |
| int sof_sdw_rt1308_init(struct snd_soc_card *card, | |
| const struct snd_soc_acpi_link_adr *link, | |
| struct snd_soc_dai_link *dai_links, | |
| struct sof_sdw_codec_info *info, | |
| bool playback) | |
| { | |
| /* Count amp number and do init on playback link only. */ | |
| if (!playback) | |
| return 0; | |
| info->amp_num++; | |
| if (info->amp_num == 1) | |
| dai_links->init = first_spk_init; | |
| if (info->amp_num == 2) { | |
| /* | |
| * if two 1308s are in one dai link, the init function | |
| * in this dai link will be first set for the first speaker, | |
| * and it should be reset to initialize all speakers when | |
| * the second speaker is found. | |
| */ | |
| if (dai_links->init) | |
| dai_links->init = all_spk_init; | |
| else | |
| dai_links->init = second_spk_init; | |
| } | |
| return 0; | |
| } |