| // SPDX-License-Identifier: GPL-2.0-only | |
| // Copyright (c) 2018-2020, Intel Corporation | |
| // | |
| // sof-wm8804.c - ASoC machine driver for Up and Up2 board | |
| // based on WM8804/Hifiberry Digi+ | |
| #include <linux/acpi.h> | |
| #include <linux/dmi.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/gpio/machine.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include <sound/soc.h> | |
| #include <sound/soc-acpi.h> | |
| #include "../../codecs/wm8804.h" | |
| struct sof_card_private { | |
| struct gpio_desc *gpio_44; | |
| struct gpio_desc *gpio_48; | |
| int sample_rate; | |
| }; | |
| #define SOF_WM8804_UP2_QUIRK BIT(0) | |
| static unsigned long sof_wm8804_quirk; | |
| static int sof_wm8804_quirk_cb(const struct dmi_system_id *id) | |
| { | |
| sof_wm8804_quirk = (unsigned long)id->driver_data; | |
| return 1; | |
| } | |
| static const struct dmi_system_id sof_wm8804_quirk_table[] = { | |
| { | |
| .callback = sof_wm8804_quirk_cb, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "AAEON"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "UP-APL01"), | |
| }, | |
| .driver_data = (void *)SOF_WM8804_UP2_QUIRK, | |
| }, | |
| {} | |
| }; | |
| static int sof_wm8804_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *params) | |
| { | |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); | |
| struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card); | |
| struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); | |
| struct snd_soc_component *codec = codec_dai->component; | |
| const int sysclk = 27000000; /* This is fixed on this board */ | |
| int samplerate; | |
| long mclk_freq; | |
| int mclk_div; | |
| int sampling_freq; | |
| bool clk_44; | |
| int ret; | |
| samplerate = params_rate(params); | |
| if (samplerate == ctx->sample_rate) | |
| return 0; | |
| ctx->sample_rate = 0; | |
| if (samplerate <= 96000) { | |
| mclk_freq = samplerate * 256; | |
| mclk_div = WM8804_MCLKDIV_256FS; | |
| } else { | |
| mclk_freq = samplerate * 128; | |
| mclk_div = WM8804_MCLKDIV_128FS; | |
| } | |
| switch (samplerate) { | |
| case 32000: | |
| sampling_freq = 0x03; | |
| break; | |
| case 44100: | |
| sampling_freq = 0x00; | |
| break; | |
| case 48000: | |
| sampling_freq = 0x02; | |
| break; | |
| case 88200: | |
| sampling_freq = 0x08; | |
| break; | |
| case 96000: | |
| sampling_freq = 0x0a; | |
| break; | |
| case 176400: | |
| sampling_freq = 0x0c; | |
| break; | |
| case 192000: | |
| sampling_freq = 0x0e; | |
| break; | |
| default: | |
| dev_err(rtd->card->dev, | |
| "unsupported samplerate %d\n", samplerate); | |
| return -EINVAL; | |
| } | |
| if (samplerate % 16000) | |
| clk_44 = true; /* use 44.1 kHz root frequency */ | |
| else | |
| clk_44 = false; | |
| if (!(IS_ERR_OR_NULL(ctx->gpio_44) || | |
| IS_ERR_OR_NULL(ctx->gpio_48))) { | |
| /* | |
| * ensure both GPIOs are LOW first, then drive the | |
| * relevant one to HIGH | |
| */ | |
| if (clk_44) { | |
| gpiod_set_value_cansleep(ctx->gpio_48, !clk_44); | |
| gpiod_set_value_cansleep(ctx->gpio_44, clk_44); | |
| } else { | |
| gpiod_set_value_cansleep(ctx->gpio_44, clk_44); | |
| gpiod_set_value_cansleep(ctx->gpio_48, !clk_44); | |
| } | |
| } | |
| snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); | |
| ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); | |
| if (ret < 0) { | |
| dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n"); | |
| return ret; | |
| } | |
| ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, | |
| sysclk, SND_SOC_CLOCK_OUT); | |
| if (ret < 0) { | |
| dev_err(rtd->card->dev, | |
| "Failed to set WM8804 SYSCLK: %d\n", ret); | |
| return ret; | |
| } | |
| /* set sampling frequency status bits */ | |
| snd_soc_component_update_bits(codec, WM8804_SPDTX4, 0x0f, | |
| sampling_freq); | |
| ctx->sample_rate = samplerate; | |
| return 0; | |
| } | |
| /* machine stream operations */ | |
| static struct snd_soc_ops sof_wm8804_ops = { | |
| .hw_params = sof_wm8804_hw_params, | |
| }; | |
| SND_SOC_DAILINK_DEF(ssp5_pin, | |
| DAILINK_COMP_ARRAY(COMP_CPU("SSP5 Pin"))); | |
| SND_SOC_DAILINK_DEF(ssp5_codec, | |
| DAILINK_COMP_ARRAY(COMP_CODEC("i2c-1AEC8804:00", "wm8804-spdif"))); | |
| SND_SOC_DAILINK_DEF(platform, | |
| DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:0e.0"))); | |
| static struct snd_soc_dai_link dailink[] = { | |
| /* back ends */ | |
| { | |
| .name = "SSP5-Codec", | |
| .id = 0, | |
| .no_pcm = 1, | |
| .dpcm_playback = 1, | |
| .dpcm_capture = 1, | |
| .ops = &sof_wm8804_ops, | |
| SND_SOC_DAILINK_REG(ssp5_pin, ssp5_codec, platform), | |
| }, | |
| }; | |
| /* SoC card */ | |
| static struct snd_soc_card sof_wm8804_card = { | |
| .name = "wm8804", /* sof- prefix added automatically */ | |
| .owner = THIS_MODULE, | |
| .dai_link = dailink, | |
| .num_links = ARRAY_SIZE(dailink), | |
| }; | |
| /* i2c-<HID>:00 with HID being 8 chars */ | |
| static char codec_name[SND_ACPI_I2C_ID_LEN]; | |
| /* | |
| * to control the HifiBerry Digi+ PRO, it's required to toggle GPIO to | |
| * select the clock source. On the Up2 board, this means | |
| * Pin29/BCM5/Linux GPIO 430 and Pin 31/BCM6/ Linux GPIO 404. | |
| * | |
| * Using the ACPI device name is not very nice, but since we only use | |
| * the value for the Up2 board there is no risk of conflict with other | |
| * platforms. | |
| */ | |
| static struct gpiod_lookup_table up2_gpios_table = { | |
| /* .dev_id is set during probe */ | |
| .table = { | |
| GPIO_LOOKUP("INT3452:01", 73, "BCM-GPIO5", GPIO_ACTIVE_HIGH), | |
| GPIO_LOOKUP("INT3452:01", 74, "BCM-GPIO6", GPIO_ACTIVE_HIGH), | |
| { }, | |
| }, | |
| }; | |
| static int sof_wm8804_probe(struct platform_device *pdev) | |
| { | |
| struct snd_soc_card *card; | |
| struct snd_soc_acpi_mach *mach; | |
| struct sof_card_private *ctx; | |
| struct acpi_device *adev; | |
| int dai_index = 0; | |
| int ret; | |
| int i; | |
| ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); | |
| if (!ctx) | |
| return -ENOMEM; | |
| mach = pdev->dev.platform_data; | |
| card = &sof_wm8804_card; | |
| card->dev = &pdev->dev; | |
| dmi_check_system(sof_wm8804_quirk_table); | |
| if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) { | |
| up2_gpios_table.dev_id = dev_name(&pdev->dev); | |
| gpiod_add_lookup_table(&up2_gpios_table); | |
| /* | |
| * The gpios are required for specific boards with | |
| * local oscillators, and optional in other cases. | |
| * Since we can't identify when they are needed, use | |
| * the GPIO as non-optional | |
| */ | |
| ctx->gpio_44 = devm_gpiod_get(&pdev->dev, "BCM-GPIO5", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(ctx->gpio_44)) { | |
| ret = PTR_ERR(ctx->gpio_44); | |
| dev_err(&pdev->dev, | |
| "could not get BCM-GPIO5: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| ctx->gpio_48 = devm_gpiod_get(&pdev->dev, "BCM-GPIO6", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(ctx->gpio_48)) { | |
| ret = PTR_ERR(ctx->gpio_48); | |
| dev_err(&pdev->dev, | |
| "could not get BCM-GPIO6: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| } | |
| /* fix index of codec dai */ | |
| for (i = 0; i < ARRAY_SIZE(dailink); i++) { | |
| if (!strcmp(dailink[i].codecs->name, "i2c-1AEC8804:00")) { | |
| dai_index = i; | |
| break; | |
| } | |
| } | |
| /* fixup codec name based on HID */ | |
| adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); | |
| if (adev) { | |
| snprintf(codec_name, sizeof(codec_name), | |
| "%s%s", "i2c-", acpi_dev_name(adev)); | |
| put_device(&adev->dev); | |
| dailink[dai_index].codecs->name = codec_name; | |
| } | |
| snd_soc_card_set_drvdata(card, ctx); | |
| return devm_snd_soc_register_card(&pdev->dev, card); | |
| } | |
| static int sof_wm8804_remove(struct platform_device *pdev) | |
| { | |
| if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) | |
| gpiod_remove_lookup_table(&up2_gpios_table); | |
| return 0; | |
| } | |
| static struct platform_driver sof_wm8804_driver = { | |
| .driver = { | |
| .name = "sof-wm8804", | |
| .pm = &snd_soc_pm_ops, | |
| }, | |
| .probe = sof_wm8804_probe, | |
| .remove = sof_wm8804_remove, | |
| }; | |
| module_platform_driver(sof_wm8804_driver); | |
| MODULE_DESCRIPTION("ASoC Intel(R) SOF + WM8804 Machine driver"); | |
| MODULE_AUTHOR("Pierre-Louis Bossart"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_ALIAS("platform:sof-wm8804"); |