| Macronix Raw NAND Controller Device Tree Bindings |
| ------------------------------------------------- |
| |
| Required properties: |
| - compatible: should be "mxic,multi-itfc-v009-nand-controller" |
| - reg: should contain 1 entry for the registers |
| - #address-cells: should be set to 1 |
| - #size-cells: should be set to 0 |
| - interrupts: interrupt line connected to this raw NAND controller |
| - clock-names: should contain "ps", "send" and "send_dly" |
| - clocks: should contain 3 phandles for the "ps", "send" and |
| "send_dly" clocks |
| |
| Children nodes: |
| - children nodes represent the available NAND chips. |
| |
| See Documentation/devicetree/bindings/mtd/nand-controller.yaml |
| for more details on generic bindings. |
| |
| Example: |
| |
| nand: nand-controller@43c30000 { |
| compatible = "mxic,multi-itfc-v009-nand-controller"; |
| reg = <0x43c30000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 0x1d IRQ_TYPE_EDGE_RISING>; |
| clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; |
| clock-names = "send", "send_dly", "ps"; |
| |
| nand@0 { |
| reg = <0>; |
| nand-ecc-mode = "soft"; |
| nand-ecc-algo = "bch"; |
| }; |
| }; |
