blob: cb9ad6b739737e4e36f47f3e93e0604f5a4c7713 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_X86_NOSPEC_BRANCH_H_
#define _ASM_X86_NOSPEC_BRANCH_H_
#include <linux/static_key.h>
#include <linux/objtool.h>
#include <asm/alternative.h>
#include <asm/alternative-asm.h>
#include <asm/cpufeatures.h>
#include <asm/msr-index.h>
#include <asm/unwind_hints.h>
/*
* Fill the CPU return stack buffer.
*
* Each entry in the RSB, if used for a speculative 'ret', contains an
* infinite 'pause; lfence; jmp' loop to capture speculative execution.
*
* This is required in various cases for retpoline and IBRS-based
* mitigations for the Spectre variant 2 vulnerability. Sometimes to
* eliminate potentially bogus entries from the RSB, and sometimes
* purely to ensure that it doesn't get empty, which on some CPUs would
* allow predictions from other (unwanted!) sources to be used.
*
* We define a CPP macro such that it can be used from both .S files and
* inline assembly. It's possible to do a .macro and then include that
* from C via asm(".include <asm/nospec-branch.h>") but let's not go there.
*/
#define RSB_CLEAR_LOOPS 32 /* To forcibly overwrite all entries */
/*
* Google experimented with loop-unrolling and this turned out to be
* the optimal version — two calls, each with their own speculation
* trap should their return address end up getting used, in a loop.
*/
#define __FILL_RETURN_BUFFER(reg, nr, sp) \
mov $(nr/2), reg; \
771: \
ANNOTATE_INTRA_FUNCTION_CALL; \
call 772f; \
773: /* speculation trap */ \
UNWIND_HINT_EMPTY; \
pause; \
lfence; \
jmp 773b; \
772: \
ANNOTATE_INTRA_FUNCTION_CALL; \
call 774f; \
775: /* speculation trap */ \
UNWIND_HINT_EMPTY; \
pause; \
lfence; \
jmp 775b; \
774: \
add $(BITS_PER_LONG/8) * 2, sp; \
dec reg; \
jnz 771b;
#ifdef __ASSEMBLY__
/*
* This should be used immediately before an indirect jump/call. It tells
* objtool the subsequent indirect jump/call is vouched safe for retpoline
* builds.
*/
.macro ANNOTATE_RETPOLINE_SAFE
.Lannotate_\@:
.pushsection .discard.retpoline_safe
_ASM_PTR .Lannotate_\@
.popsection
.endm
/*
* JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
* indirect jmp/call which may be susceptible to the Spectre variant 2
* attack.
*/
.macro JMP_NOSPEC reg:req
#ifdef CONFIG_RETPOLINE
ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
__stringify(jmp __x86_retpoline_\reg), X86_FEATURE_RETPOLINE, \
__stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_AMD
#else
jmp *%\reg
#endif
.endm
.macro CALL_NOSPEC reg:req
#ifdef CONFIG_RETPOLINE
ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg), \
__stringify(call __x86_retpoline_\reg), X86_FEATURE_RETPOLINE, \
__stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_AMD
#else
call *%\reg
#endif
.endm
/*
* A simpler FILL_RETURN_BUFFER macro. Don't make people use the CPP
* monstrosity above, manually.
*/
.macro FILL_RETURN_BUFFER reg:req nr:req ftr:req
#ifdef CONFIG_RETPOLINE
ALTERNATIVE "jmp .Lskip_rsb_\@", "", \ftr
__FILL_RETURN_BUFFER(\reg,\nr,%_ASM_SP)
.Lskip_rsb_\@:
#endif
.endm
#else /* __ASSEMBLY__ */
#define ANNOTATE_RETPOLINE_SAFE \
"999:\n\t" \
".pushsection .discard.retpoline_safe\n\t" \
_ASM_PTR " 999b\n\t" \
".popsection\n\t"
#ifdef CONFIG_RETPOLINE
#ifdef CONFIG_X86_64
/*
* Inline asm uses the %V modifier which is only in newer GCC
* which is ensured when CONFIG_RETPOLINE is defined.
*/
# define CALL_NOSPEC \
ALTERNATIVE_2( \
ANNOTATE_RETPOLINE_SAFE \
"call *%[thunk_target]\n", \
"call __x86_retpoline_%V[thunk_target]\n", \
X86_FEATURE_RETPOLINE, \
"lfence;\n" \
ANNOTATE_RETPOLINE_SAFE \
"call *%[thunk_target]\n", \
X86_FEATURE_RETPOLINE_AMD)
# define THUNK_TARGET(addr) [thunk_target] "r" (addr)
#else /* CONFIG_X86_32 */
/*
* For i386 we use the original ret-equivalent retpoline, because
* otherwise we'll run out of registers. We don't care about CET
* here, anyway.
*/
# define CALL_NOSPEC \
ALTERNATIVE_2( \
ANNOTATE_RETPOLINE_SAFE \
"call *%[thunk_target]\n", \
" jmp 904f;\n" \
" .align 16\n" \
"901: call 903f;\n" \
"902: pause;\n" \
" lfence;\n" \
" jmp 902b;\n" \
" .align 16\n" \
"903: lea 4(%%esp), %%esp;\n" \
" pushl %[thunk_target];\n" \
" ret;\n" \
" .align 16\n" \
"904: call 901b;\n", \
X86_FEATURE_RETPOLINE, \
"lfence;\n" \
ANNOTATE_RETPOLINE_SAFE \
"call *%[thunk_target]\n", \
X86_FEATURE_RETPOLINE_AMD)
# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
#endif
#else /* No retpoline for C / inline asm */
# define CALL_NOSPEC "call *%[thunk_target]\n"
# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
#endif
/* The Spectre V2 mitigation variants */
enum spectre_v2_mitigation {
SPECTRE_V2_NONE,
SPECTRE_V2_RETPOLINE_GENERIC,
SPECTRE_V2_RETPOLINE_AMD,
SPECTRE_V2_IBRS_ENHANCED,
};
/* The indirect branch speculation control variants */
enum spectre_v2_user_mitigation {
SPECTRE_V2_USER_NONE,
SPECTRE_V2_USER_STRICT,
SPECTRE_V2_USER_STRICT_PREFERRED,
SPECTRE_V2_USER_PRCTL,
SPECTRE_V2_USER_SECCOMP,
};
/* The Speculative Store Bypass disable variants */
enum ssb_mitigation {
SPEC_STORE_BYPASS_NONE,
SPEC_STORE_BYPASS_DISABLE,
SPEC_STORE_BYPASS_PRCTL,
SPEC_STORE_BYPASS_SECCOMP,
};
extern char __indirect_thunk_start[];
extern char __indirect_thunk_end[];
static __always_inline
void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
{
asm volatile(ALTERNATIVE("", "wrmsr", %c[feature])
: : "c" (msr),
"a" ((u32)val),
"d" ((u32)(val >> 32)),
[feature] "i" (feature)
: "memory");
}
static inline void indirect_branch_prediction_barrier(void)
{
u64 val = PRED_CMD_IBPB;
alternative_msr_write(MSR_IA32_PRED_CMD, val, X86_FEATURE_USE_IBPB);
}
/* The Intel SPEC CTRL MSR base value cache */
extern u64 x86_spec_ctrl_base;
/*
* With retpoline, we must use IBRS to restrict branch prediction
* before calling into firmware.
*
* (Implemented as CPP macros due to header hell.)
*/
#define firmware_restrict_branch_speculation_start() \
do { \
u64 val = x86_spec_ctrl_base | SPEC_CTRL_IBRS; \
\
preempt_disable(); \
alternative_msr_write(MSR_IA32_SPEC_CTRL, val, \
X86_FEATURE_USE_IBRS_FW); \
} while (0)
#define firmware_restrict_branch_speculation_end() \
do { \
u64 val = x86_spec_ctrl_base; \
\
alternative_msr_write(MSR_IA32_SPEC_CTRL, val, \
X86_FEATURE_USE_IBRS_FW); \
preempt_enable(); \
} while (0)
DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
DECLARE_STATIC_KEY_FALSE(mds_user_clear);
DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
#include <asm/segment.h>
/**
* mds_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
*
* This uses the otherwise unused and obsolete VERW instruction in
* combination with microcode which triggers a CPU buffer flush when the
* instruction is executed.
*/
static __always_inline void mds_clear_cpu_buffers(void)
{
static const u16 ds = __KERNEL_DS;
/*
* Has to be the memory-operand variant because only that
* guarantees the CPU buffer flush functionality according to
* documentation. The register-operand variant does not.
* Works with any segment selector, but a valid writable
* data segment is the fastest variant.
*
* "cc" clobber is required because VERW modifies ZF.
*/
asm volatile("verw %[ds]" : : [ds] "m" (ds) : "cc");
}
/**
* mds_user_clear_cpu_buffers - Mitigation for MDS and TAA vulnerability
*
* Clear CPU buffers if the corresponding static key is enabled
*/
static __always_inline void mds_user_clear_cpu_buffers(void)
{
if (static_branch_likely(&mds_user_clear))
mds_clear_cpu_buffers();
}
/**
* mds_idle_clear_cpu_buffers - Mitigation for MDS vulnerability
*
* Clear CPU buffers if the corresponding static key is enabled
*/
static inline void mds_idle_clear_cpu_buffers(void)
{
if (static_branch_likely(&mds_idle_clear))
mds_clear_cpu_buffers();
}
#endif /* __ASSEMBLY__ */
/*
* Below is used in the eBPF JIT compiler and emits the byte sequence
* for the following assembly:
*
* With retpolines configured:
*
* callq do_rop
* spec_trap:
* pause
* lfence
* jmp spec_trap
* do_rop:
* mov %rcx,(%rsp) for x86_64
* mov %edx,(%esp) for x86_32
* retq
*
* Without retpolines configured:
*
* jmp *%rcx for x86_64
* jmp *%edx for x86_32
*/
#ifdef CONFIG_RETPOLINE
# ifdef CONFIG_X86_64
# define RETPOLINE_RCX_BPF_JIT_SIZE 17
# define RETPOLINE_RCX_BPF_JIT() \
do { \
EMIT1_off32(0xE8, 7); /* callq do_rop */ \
/* spec_trap: */ \
EMIT2(0xF3, 0x90); /* pause */ \
EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
/* do_rop: */ \
EMIT4(0x48, 0x89, 0x0C, 0x24); /* mov %rcx,(%rsp) */ \
EMIT1(0xC3); /* retq */ \
} while (0)
# else /* !CONFIG_X86_64 */
# define RETPOLINE_EDX_BPF_JIT() \
do { \
EMIT1_off32(0xE8, 7); /* call do_rop */ \
/* spec_trap: */ \
EMIT2(0xF3, 0x90); /* pause */ \
EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
/* do_rop: */ \
EMIT3(0x89, 0x14, 0x24); /* mov %edx,(%esp) */ \
EMIT1(0xC3); /* ret */ \
} while (0)
# endif
#else /* !CONFIG_RETPOLINE */
# ifdef CONFIG_X86_64
# define RETPOLINE_RCX_BPF_JIT_SIZE 2
# define RETPOLINE_RCX_BPF_JIT() \
EMIT2(0xFF, 0xE1); /* jmp *%rcx */
# else /* !CONFIG_X86_64 */
# define RETPOLINE_EDX_BPF_JIT() \
EMIT2(0xFF, 0xE2) /* jmp *%edx */
# endif
#endif
#endif /* _ASM_X86_NOSPEC_BRANCH_H_ */