| /* |
| * Linux ARCnet driver - COM20020 PCI support |
| * Contemporary Controls PCI20 and SOHARD SH-ARC PCI |
| * |
| * Written 1994-1999 by Avery Pennarun, |
| * based on an ISA version by David Woodhouse. |
| * Written 1999-2000 by Martin Mares <mj@ucw.cz>. |
| * Derived from skeleton.c by Donald Becker. |
| * |
| * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| * for sponsoring the further development of this driver. |
| * |
| * ********************** |
| * |
| * The original copyright of skeleton.c was as follows: |
| * |
| * skeleton.c Written 1993 by Donald Becker. |
| * Copyright 1993 United States Government as represented by the |
| * Director, National Security Agency. This software may only be used |
| * and distributed according to the terms of the GNU General Public License as |
| * modified by SRC, incorporated herein by reference. |
| * |
| * ********************** |
| * |
| * For more details, see drivers/net/arcnet.c |
| * |
| * ********************** |
| */ |
| |
| #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/list.h> |
| #include <linux/io.h> |
| #include <linux/leds.h> |
| |
| #include "arcdevice.h" |
| #include "com20020.h" |
| |
| /* Module parameters */ |
| |
| static int node; |
| static char device[9]; /* use eg. device="arc1" to change name */ |
| static int timeout = 3; |
| static int backplane; |
| static int clockp; |
| static int clockm; |
| |
| module_param(node, int, 0); |
| module_param_string(device, device, sizeof(device), 0); |
| module_param(timeout, int, 0); |
| module_param(backplane, int, 0); |
| module_param(clockp, int, 0); |
| module_param(clockm, int, 0); |
| MODULE_LICENSE("GPL"); |
| |
| static void led_tx_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct com20020_dev *card; |
| struct com20020_priv *priv; |
| struct com20020_pci_card_info *ci; |
| |
| card = container_of(led_cdev, struct com20020_dev, tx_led); |
| |
| priv = card->pci_priv; |
| ci = priv->ci; |
| |
| outb(!!value, priv->misc + ci->leds[card->index].green); |
| } |
| |
| static void led_recon_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct com20020_dev *card; |
| struct com20020_priv *priv; |
| struct com20020_pci_card_info *ci; |
| |
| card = container_of(led_cdev, struct com20020_dev, recon_led); |
| |
| priv = card->pci_priv; |
| ci = priv->ci; |
| |
| outb(!!value, priv->misc + ci->leds[card->index].red); |
| } |
| |
| static ssize_t backplane_mode_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct net_device *net_dev = to_net_dev(dev); |
| struct arcnet_local *lp = netdev_priv(net_dev); |
| |
| return sprintf(buf, "%s\n", lp->backplane ? "true" : "false"); |
| } |
| static DEVICE_ATTR_RO(backplane_mode); |
| |
| static struct attribute *com20020_state_attrs[] = { |
| &dev_attr_backplane_mode.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group com20020_state_group = { |
| .name = NULL, |
| .attrs = com20020_state_attrs, |
| }; |
| |
| static void com20020pci_remove(struct pci_dev *pdev); |
| |
| static int com20020pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct com20020_pci_card_info *ci; |
| struct com20020_pci_channel_map *mm; |
| struct net_device *dev; |
| struct arcnet_local *lp; |
| struct com20020_priv *priv; |
| int i, ioaddr, ret; |
| struct resource *r; |
| |
| if (pci_enable_device(pdev)) |
| return -EIO; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv), |
| GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| ci = (struct com20020_pci_card_info *)id->driver_data; |
| priv->ci = ci; |
| mm = &ci->misc_map; |
| |
| INIT_LIST_HEAD(&priv->list_dev); |
| |
| if (mm->size) { |
| ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset; |
| r = devm_request_region(&pdev->dev, ioaddr, mm->size, |
| "com20020-pci"); |
| if (!r) { |
| pr_err("IO region %xh-%xh already allocated.\n", |
| ioaddr, ioaddr + mm->size - 1); |
| return -EBUSY; |
| } |
| priv->misc = ioaddr; |
| } |
| |
| for (i = 0; i < ci->devcount; i++) { |
| struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i]; |
| struct com20020_dev *card; |
| int dev_id_mask = 0xf; |
| |
| dev = alloc_arcdev(device); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto out_port; |
| } |
| dev->dev_port = i; |
| |
| dev->netdev_ops = &com20020_netdev_ops; |
| |
| lp = netdev_priv(dev); |
| |
| arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name); |
| ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset; |
| |
| r = devm_request_region(&pdev->dev, ioaddr, cm->size, |
| "com20020-pci"); |
| if (!r) { |
| pr_err("IO region %xh-%xh already allocated\n", |
| ioaddr, ioaddr + cm->size - 1); |
| ret = -EBUSY; |
| goto out_port; |
| } |
| |
| /* Dummy access after Reset |
| * ARCNET controller needs |
| * this access to detect bustype |
| */ |
| arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); |
| arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); |
| |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| dev->base_addr = ioaddr; |
| dev->dev_addr[0] = node; |
| dev->sysfs_groups[0] = &com20020_state_group; |
| dev->irq = pdev->irq; |
| lp->card_name = "PCI COM20020"; |
| lp->card_flags = ci->flags; |
| lp->backplane = backplane; |
| lp->clockp = clockp & 7; |
| lp->clockm = clockm & 3; |
| lp->timeout = timeout; |
| lp->hw.owner = THIS_MODULE; |
| |
| lp->backplane = (inb(priv->misc) >> (2 + i)) & 0x1; |
| |
| if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15)) |
| lp->backplane = 1; |
| |
| /* Get the dev_id from the PLX rotary coder */ |
| if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) |
| dev_id_mask = 0x3; |
| dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; |
| |
| snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); |
| |
| if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { |
| pr_err("IO address %Xh is empty!\n", ioaddr); |
| ret = -EIO; |
| goto out_port; |
| } |
| if (com20020_check(dev)) { |
| ret = -EIO; |
| goto out_port; |
| } |
| |
| card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), |
| GFP_KERNEL); |
| if (!card) { |
| ret = -ENOMEM; |
| goto out_port; |
| } |
| |
| card->index = i; |
| card->pci_priv = priv; |
| card->tx_led.brightness_set = led_tx_set; |
| card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, |
| GFP_KERNEL, "arc%d-%d-tx", |
| dev->dev_id, i); |
| card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, |
| "pci:green:tx:%d-%d", |
| dev->dev_id, i); |
| |
| card->tx_led.dev = &dev->dev; |
| card->recon_led.brightness_set = led_recon_set; |
| card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, |
| GFP_KERNEL, "arc%d-%d-recon", |
| dev->dev_id, i); |
| card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, |
| "pci:red:recon:%d-%d", |
| dev->dev_id, i); |
| card->recon_led.dev = &dev->dev; |
| card->dev = dev; |
| |
| ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); |
| if (ret) |
| goto out_port; |
| |
| ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); |
| if (ret) |
| goto out_port; |
| |
| dev_set_drvdata(&dev->dev, card); |
| |
| ret = com20020_found(dev, IRQF_SHARED); |
| if (ret) |
| goto out_port; |
| |
| devm_arcnet_led_init(dev, dev->dev_id, i); |
| |
| list_add(&card->list, &priv->list_dev); |
| } |
| |
| pci_set_drvdata(pdev, priv); |
| |
| return 0; |
| |
| out_port: |
| com20020pci_remove(pdev); |
| return ret; |
| } |
| |
| static void com20020pci_remove(struct pci_dev *pdev) |
| { |
| struct com20020_dev *card, *tmpcard; |
| struct com20020_priv *priv; |
| |
| priv = pci_get_drvdata(pdev); |
| |
| list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) { |
| struct net_device *dev = card->dev; |
| |
| unregister_netdev(dev); |
| free_irq(dev->irq, dev); |
| free_arcdev(dev); |
| } |
| } |
| |
| static struct com20020_pci_card_info card_info_10mbit = { |
| .name = "ARC-PCI", |
| .devcount = 1, |
| .chan_map_tbl = { |
| { |
| .bar = 2, |
| .offset = 0x00, |
| .size = 0x08, |
| }, |
| }, |
| .flags = ARC_CAN_10MBIT, |
| }; |
| |
| static struct com20020_pci_card_info card_info_5mbit = { |
| .name = "ARC-PCI", |
| .devcount = 1, |
| .chan_map_tbl = { |
| { |
| .bar = 2, |
| .offset = 0x00, |
| .size = 0x08, |
| }, |
| }, |
| .flags = ARC_IS_5MBIT, |
| }; |
| |
| static struct com20020_pci_card_info card_info_sohard = { |
| .name = "PLX-PCI", |
| .devcount = 1, |
| /* SOHARD needs PCI base addr 4 */ |
| .chan_map_tbl = { |
| { |
| .bar = 4, |
| .offset = 0x00, |
| .size = 0x08 |
| }, |
| }, |
| .flags = ARC_CAN_10MBIT, |
| }; |
| |
| static struct com20020_pci_card_info card_info_eae_arc1 = { |
| .name = "EAE PLX-PCI ARC1", |
| .devcount = 1, |
| .chan_map_tbl = { |
| { |
| .bar = 2, |
| .offset = 0x00, |
| .size = 0x08, |
| }, |
| }, |
| .misc_map = { |
| .bar = 2, |
| .offset = 0x10, |
| .size = 0x04, |
| }, |
| .leds = { |
| { |
| .green = 0x0, |
| .red = 0x1, |
| }, |
| }, |
| .rotary = 0x0, |
| .flags = ARC_CAN_10MBIT, |
| }; |
| |
| static struct com20020_pci_card_info card_info_eae_ma1 = { |
| .name = "EAE PLX-PCI MA1", |
| .devcount = 2, |
| .chan_map_tbl = { |
| { |
| .bar = 2, |
| .offset = 0x00, |
| .size = 0x08, |
| }, { |
| .bar = 2, |
| .offset = 0x08, |
| .size = 0x08, |
| } |
| }, |
| .misc_map = { |
| .bar = 2, |
| .offset = 0x10, |
| .size = 0x04, |
| }, |
| .leds = { |
| { |
| .green = 0x0, |
| .red = 0x1, |
| }, { |
| .green = 0x2, |
| .red = 0x3, |
| }, |
| }, |
| .rotary = 0x0, |
| .flags = ARC_CAN_10MBIT, |
| }; |
| |
| static struct com20020_pci_card_info card_info_eae_fb2 = { |
| .name = "EAE PLX-PCI FB2", |
| .devcount = 1, |
| .chan_map_tbl = { |
| { |
| .bar = 2, |
| .offset = 0x00, |
| .size = 0x08, |
| }, |
| }, |
| .misc_map = { |
| .bar = 2, |
| .offset = 0x10, |
| .size = 0x04, |
| }, |
| .leds = { |
| { |
| .green = 0x0, |
| .red = 0x1, |
| }, |
| }, |
| .rotary = 0x0, |
| .flags = ARC_CAN_10MBIT, |
| }; |
| |
| static const struct pci_device_id com20020pci_id_table[] = { |
| { |
| 0x1571, 0xa001, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0, |
| }, |
| { |
| 0x1571, 0xa002, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0, |
| }, |
| { |
| 0x1571, 0xa003, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0 |
| }, |
| { |
| 0x1571, 0xa004, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0, |
| }, |
| { |
| 0x1571, 0xa005, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0 |
| }, |
| { |
| 0x1571, 0xa006, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0 |
| }, |
| { |
| 0x1571, 0xa007, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0 |
| }, |
| { |
| 0x1571, 0xa008, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| 0 |
| }, |
| { |
| 0x1571, 0xa009, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_5mbit |
| }, |
| { |
| 0x1571, 0xa00a, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_5mbit |
| }, |
| { |
| 0x1571, 0xa00b, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_5mbit |
| }, |
| { |
| 0x1571, 0xa00c, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_5mbit |
| }, |
| { |
| 0x1571, 0xa00d, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_5mbit |
| }, |
| { |
| 0x1571, 0xa00e, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_5mbit |
| }, |
| { |
| 0x1571, 0xa201, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x1571, 0xa202, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x1571, 0xa203, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x1571, 0xa204, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x1571, 0xa205, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x1571, 0xa206, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x10B5, 0x9030, |
| 0x10B5, 0x2978, |
| 0, 0, |
| (kernel_ulong_t)&card_info_sohard |
| }, |
| { |
| 0x10B5, 0x9050, |
| 0x10B5, 0x2273, |
| 0, 0, |
| (kernel_ulong_t)&card_info_sohard |
| }, |
| { |
| 0x10B5, 0x9050, |
| 0x10B5, 0x3263, |
| 0, 0, |
| (kernel_ulong_t)&card_info_eae_arc1 |
| }, |
| { |
| 0x10B5, 0x9050, |
| 0x10B5, 0x3292, |
| 0, 0, |
| (kernel_ulong_t)&card_info_eae_ma1 |
| }, |
| { |
| 0x10B5, 0x9050, |
| 0x10B5, 0x3294, |
| 0, 0, |
| (kernel_ulong_t)&card_info_eae_fb2 |
| }, |
| { |
| 0x14BA, 0x6000, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { |
| 0x10B5, 0x2200, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| (kernel_ulong_t)&card_info_10mbit |
| }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, com20020pci_id_table); |
| |
| static struct pci_driver com20020pci_driver = { |
| .name = "com20020", |
| .id_table = com20020pci_id_table, |
| .probe = com20020pci_probe, |
| .remove = com20020pci_remove, |
| }; |
| |
| static int __init com20020pci_init(void) |
| { |
| if (BUGLVL(D_NORMAL)) |
| pr_info("%s\n", "COM20020 PCI support"); |
| return pci_register_driver(&com20020pci_driver); |
| } |
| |
| static void __exit com20020pci_cleanup(void) |
| { |
| pci_unregister_driver(&com20020pci_driver); |
| } |
| |
| module_init(com20020pci_init) |
| module_exit(com20020pci_cleanup) |