| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * An I2C driver for the Philips PCF8563 RTC |
| * Copyright 2005-06 Tower Technologies |
| * |
| * Author: Alessandro Zummo <a.zummo@towertech.it> |
| * Maintainers: http://www.nslu2-linux.org/ |
| * |
| * based on the other drivers in this same directory. |
| * |
| * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/i2c.h> |
| #include <linux/bcd.h> |
| #include <linux/rtc.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/err.h> |
| |
| #define PCF8563_REG_ST1 0x00 /* status */ |
| #define PCF8563_REG_ST2 0x01 |
| #define PCF8563_BIT_AIE BIT(1) |
| #define PCF8563_BIT_AF BIT(3) |
| #define PCF8563_BITS_ST2_N (7 << 5) |
| |
| #define PCF8563_REG_SC 0x02 /* datetime */ |
| #define PCF8563_REG_MN 0x03 |
| #define PCF8563_REG_HR 0x04 |
| #define PCF8563_REG_DM 0x05 |
| #define PCF8563_REG_DW 0x06 |
| #define PCF8563_REG_MO 0x07 |
| #define PCF8563_REG_YR 0x08 |
| |
| #define PCF8563_REG_AMN 0x09 /* alarm */ |
| |
| #define PCF8563_REG_CLKO 0x0D /* clock out */ |
| #define PCF8563_REG_CLKO_FE 0x80 /* clock out enabled */ |
| #define PCF8563_REG_CLKO_F_MASK 0x03 /* frequenc mask */ |
| #define PCF8563_REG_CLKO_F_32768HZ 0x00 |
| #define PCF8563_REG_CLKO_F_1024HZ 0x01 |
| #define PCF8563_REG_CLKO_F_32HZ 0x02 |
| #define PCF8563_REG_CLKO_F_1HZ 0x03 |
| |
| #define PCF8563_REG_TMRC 0x0E /* timer control */ |
| #define PCF8563_TMRC_ENABLE BIT(7) |
| #define PCF8563_TMRC_4096 0 |
| #define PCF8563_TMRC_64 1 |
| #define PCF8563_TMRC_1 2 |
| #define PCF8563_TMRC_1_60 3 |
| #define PCF8563_TMRC_MASK 3 |
| |
| #define PCF8563_REG_TMR 0x0F /* timer */ |
| |
| #define PCF8563_SC_LV 0x80 /* low voltage */ |
| #define PCF8563_MO_C 0x80 /* century */ |
| |
| static struct i2c_driver pcf8563_driver; |
| |
| struct pcf8563 { |
| struct rtc_device *rtc; |
| /* |
| * The meaning of MO_C bit varies by the chip type. |
| * From PCF8563 datasheet: this bit is toggled when the years |
| * register overflows from 99 to 00 |
| * 0 indicates the century is 20xx |
| * 1 indicates the century is 19xx |
| * From RTC8564 datasheet: this bit indicates change of |
| * century. When the year digit data overflows from 99 to 00, |
| * this bit is set. By presetting it to 0 while still in the |
| * 20th century, it will be set in year 2000, ... |
| * There seems no reliable way to know how the system use this |
| * bit. So let's do it heuristically, assuming we are live in |
| * 1970...2069. |
| */ |
| int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */ |
| |
| struct i2c_client *client; |
| #ifdef CONFIG_COMMON_CLK |
| struct clk_hw clkout_hw; |
| #endif |
| }; |
| |
| static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg, |
| unsigned char length, unsigned char *buf) |
| { |
| struct i2c_msg msgs[] = { |
| {/* setup read ptr */ |
| .addr = client->addr, |
| .len = 1, |
| .buf = ®, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = length, |
| .buf = buf |
| }, |
| }; |
| |
| if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { |
| dev_err(&client->dev, "%s: read error\n", __func__); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int pcf8563_write_block_data(struct i2c_client *client, |
| unsigned char reg, unsigned char length, |
| unsigned char *buf) |
| { |
| int i, err; |
| |
| for (i = 0; i < length; i++) { |
| unsigned char data[2] = { reg + i, buf[i] }; |
| |
| err = i2c_master_send(client, data, sizeof(data)); |
| if (err != sizeof(data)) { |
| dev_err(&client->dev, |
| "%s: err=%d addr=%02x, data=%02x\n", |
| __func__, err, data[0], data[1]); |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on) |
| { |
| unsigned char buf; |
| int err; |
| |
| err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf); |
| if (err < 0) |
| return err; |
| |
| if (on) |
| buf |= PCF8563_BIT_AIE; |
| else |
| buf &= ~PCF8563_BIT_AIE; |
| |
| buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N); |
| |
| err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf); |
| if (err < 0) { |
| dev_err(&client->dev, "%s: write error\n", __func__); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en, |
| unsigned char *pen) |
| { |
| unsigned char buf; |
| int err; |
| |
| err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf); |
| if (err) |
| return err; |
| |
| if (en) |
| *en = !!(buf & PCF8563_BIT_AIE); |
| if (pen) |
| *pen = !!(buf & PCF8563_BIT_AF); |
| |
| return 0; |
| } |
| |
| static irqreturn_t pcf8563_irq(int irq, void *dev_id) |
| { |
| struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id); |
| int err; |
| char pending; |
| |
| err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending); |
| if (err) |
| return IRQ_NONE; |
| |
| if (pending) { |
| rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF); |
| pcf8563_set_alarm_mode(pcf8563->client, 1); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| /* |
| * In the routines that deal directly with the pcf8563 hardware, we use |
| * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. |
| */ |
| static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct pcf8563 *pcf8563 = i2c_get_clientdata(client); |
| unsigned char buf[9]; |
| int err; |
| |
| err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf); |
| if (err) |
| return err; |
| |
| if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) { |
| dev_err(&client->dev, |
| "low voltage detected, date/time is not reliable.\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(&client->dev, |
| "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " |
| "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", |
| __func__, |
| buf[0], buf[1], buf[2], buf[3], |
| buf[4], buf[5], buf[6], buf[7], |
| buf[8]); |
| |
| |
| tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F); |
| tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F); |
| tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ |
| tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F); |
| tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; |
| tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ |
| tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]) + 100; |
| /* detect the polarity heuristically. see note above. */ |
| pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ? |
| (tm->tm_year >= 100) : (tm->tm_year < 100); |
| |
| dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " |
| "mday=%d, mon=%d, year=%d, wday=%d\n", |
| __func__, |
| tm->tm_sec, tm->tm_min, tm->tm_hour, |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| |
| return 0; |
| } |
| |
| static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct pcf8563 *pcf8563 = i2c_get_clientdata(client); |
| unsigned char buf[9]; |
| |
| dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " |
| "mday=%d, mon=%d, year=%d, wday=%d\n", |
| __func__, |
| tm->tm_sec, tm->tm_min, tm->tm_hour, |
| tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| |
| /* hours, minutes and seconds */ |
| buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec); |
| buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min); |
| buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour); |
| |
| buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday); |
| |
| /* month, 1 - 12 */ |
| buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1); |
| |
| /* year and century */ |
| buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year - 100); |
| if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100)) |
| buf[PCF8563_REG_MO] |= PCF8563_MO_C; |
| |
| buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; |
| |
| return pcf8563_write_block_data(client, PCF8563_REG_SC, |
| 9 - PCF8563_REG_SC, buf + PCF8563_REG_SC); |
| } |
| |
| static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| |
| switch (cmd) { |
| case RTC_VL_READ: |
| ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC); |
| if (ret < 0) |
| return ret; |
| |
| return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0, |
| (unsigned int __user *)arg); |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| unsigned char buf[4]; |
| int err; |
| |
| err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf); |
| if (err) |
| return err; |
| |
| dev_dbg(&client->dev, |
| "%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n", |
| __func__, buf[0], buf[1], buf[2], buf[3]); |
| |
| tm->time.tm_sec = 0; |
| tm->time.tm_min = bcd2bin(buf[0] & 0x7F); |
| tm->time.tm_hour = bcd2bin(buf[1] & 0x3F); |
| tm->time.tm_mday = bcd2bin(buf[2] & 0x3F); |
| tm->time.tm_wday = bcd2bin(buf[3] & 0x7); |
| |
| err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending); |
| if (err < 0) |
| return err; |
| |
| dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d," |
| " enabled=%d, pending=%d\n", __func__, tm->time.tm_min, |
| tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday, |
| tm->enabled, tm->pending); |
| |
| return 0; |
| } |
| |
| static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| unsigned char buf[4]; |
| int err; |
| |
| /* The alarm has no seconds, round up to nearest minute */ |
| if (tm->time.tm_sec) { |
| time64_t alarm_time = rtc_tm_to_time64(&tm->time); |
| |
| alarm_time += 60 - tm->time.tm_sec; |
| rtc_time64_to_tm(alarm_time, &tm->time); |
| } |
| |
| dev_dbg(dev, "%s, min=%d hour=%d wday=%d mday=%d " |
| "enabled=%d pending=%d\n", __func__, |
| tm->time.tm_min, tm->time.tm_hour, tm->time.tm_wday, |
| tm->time.tm_mday, tm->enabled, tm->pending); |
| |
| buf[0] = bin2bcd(tm->time.tm_min); |
| buf[1] = bin2bcd(tm->time.tm_hour); |
| buf[2] = bin2bcd(tm->time.tm_mday); |
| buf[3] = tm->time.tm_wday & 0x07; |
| |
| err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf); |
| if (err) |
| return err; |
| |
| return pcf8563_set_alarm_mode(client, !!tm->enabled); |
| } |
| |
| static int pcf8563_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| dev_dbg(dev, "%s: en=%d\n", __func__, enabled); |
| return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled); |
| } |
| |
| #ifdef CONFIG_COMMON_CLK |
| /* |
| * Handling of the clkout |
| */ |
| |
| #define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw) |
| |
| static const int clkout_rates[] = { |
| 32768, |
| 1024, |
| 32, |
| 1, |
| }; |
| |
| static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); |
| struct i2c_client *client = pcf8563->client; |
| unsigned char buf; |
| int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); |
| |
| if (ret < 0) |
| return 0; |
| |
| buf &= PCF8563_REG_CLKO_F_MASK; |
| return clkout_rates[buf]; |
| } |
| |
| static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) |
| if (clkout_rates[i] <= rate) |
| return clkout_rates[i]; |
| |
| return 0; |
| } |
| |
| static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); |
| struct i2c_client *client = pcf8563->client; |
| unsigned char buf; |
| int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); |
| int i; |
| |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) |
| if (clkout_rates[i] == rate) { |
| buf &= ~PCF8563_REG_CLKO_F_MASK; |
| buf |= i; |
| ret = pcf8563_write_block_data(client, |
| PCF8563_REG_CLKO, 1, |
| &buf); |
| return ret; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int pcf8563_clkout_control(struct clk_hw *hw, bool enable) |
| { |
| struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); |
| struct i2c_client *client = pcf8563->client; |
| unsigned char buf; |
| int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); |
| |
| if (ret < 0) |
| return ret; |
| |
| if (enable) |
| buf |= PCF8563_REG_CLKO_FE; |
| else |
| buf &= ~PCF8563_REG_CLKO_FE; |
| |
| ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf); |
| return ret; |
| } |
| |
| static int pcf8563_clkout_prepare(struct clk_hw *hw) |
| { |
| return pcf8563_clkout_control(hw, 1); |
| } |
| |
| static void pcf8563_clkout_unprepare(struct clk_hw *hw) |
| { |
| pcf8563_clkout_control(hw, 0); |
| } |
| |
| static int pcf8563_clkout_is_prepared(struct clk_hw *hw) |
| { |
| struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw); |
| struct i2c_client *client = pcf8563->client; |
| unsigned char buf; |
| int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf); |
| |
| if (ret < 0) |
| return ret; |
| |
| return !!(buf & PCF8563_REG_CLKO_FE); |
| } |
| |
| static const struct clk_ops pcf8563_clkout_ops = { |
| .prepare = pcf8563_clkout_prepare, |
| .unprepare = pcf8563_clkout_unprepare, |
| .is_prepared = pcf8563_clkout_is_prepared, |
| .recalc_rate = pcf8563_clkout_recalc_rate, |
| .round_rate = pcf8563_clkout_round_rate, |
| .set_rate = pcf8563_clkout_set_rate, |
| }; |
| |
| static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563) |
| { |
| struct i2c_client *client = pcf8563->client; |
| struct device_node *node = client->dev.of_node; |
| struct clk *clk; |
| struct clk_init_data init; |
| int ret; |
| unsigned char buf; |
| |
| /* disable the clkout output */ |
| buf = 0; |
| ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| init.name = "pcf8563-clkout"; |
| init.ops = &pcf8563_clkout_ops; |
| init.flags = 0; |
| init.parent_names = NULL; |
| init.num_parents = 0; |
| pcf8563->clkout_hw.init = &init; |
| |
| /* optional override of the clockname */ |
| of_property_read_string(node, "clock-output-names", &init.name); |
| |
| /* register the clock */ |
| clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw); |
| |
| if (!IS_ERR(clk)) |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); |
| |
| return clk; |
| } |
| #endif |
| |
| static const struct rtc_class_ops pcf8563_rtc_ops = { |
| .ioctl = pcf8563_rtc_ioctl, |
| .read_time = pcf8563_rtc_read_time, |
| .set_time = pcf8563_rtc_set_time, |
| .read_alarm = pcf8563_rtc_read_alarm, |
| .set_alarm = pcf8563_rtc_set_alarm, |
| .alarm_irq_enable = pcf8563_irq_enable, |
| }; |
| |
| static int pcf8563_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pcf8563 *pcf8563; |
| int err; |
| unsigned char buf; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
| return -ENODEV; |
| |
| pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563), |
| GFP_KERNEL); |
| if (!pcf8563) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, pcf8563); |
| pcf8563->client = client; |
| device_set_wakeup_capable(&client->dev, 1); |
| |
| /* Set timer to lowest frequency to save power (ref Haoyu datasheet) */ |
| buf = PCF8563_TMRC_1_60; |
| err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf); |
| if (err < 0) { |
| dev_err(&client->dev, "%s: write error\n", __func__); |
| return err; |
| } |
| |
| /* Clear flags and disable interrupts */ |
| buf = 0; |
| err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf); |
| if (err < 0) { |
| dev_err(&client->dev, "%s: write error\n", __func__); |
| return err; |
| } |
| |
| pcf8563->rtc = devm_rtc_allocate_device(&client->dev); |
| if (IS_ERR(pcf8563->rtc)) |
| return PTR_ERR(pcf8563->rtc); |
| |
| pcf8563->rtc->ops = &pcf8563_rtc_ops; |
| /* the pcf8563 alarm only supports a minute accuracy */ |
| pcf8563->rtc->uie_unsupported = 1; |
| pcf8563->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| pcf8563->rtc->range_max = RTC_TIMESTAMP_END_2099; |
| pcf8563->rtc->set_start_time = true; |
| |
| if (client->irq > 0) { |
| err = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, pcf8563_irq, |
| IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_LOW, |
| pcf8563_driver.driver.name, client); |
| if (err) { |
| dev_err(&client->dev, "unable to request IRQ %d\n", |
| client->irq); |
| return err; |
| } |
| } |
| |
| err = devm_rtc_register_device(pcf8563->rtc); |
| if (err) |
| return err; |
| |
| #ifdef CONFIG_COMMON_CLK |
| /* register clk in common clk framework */ |
| pcf8563_clkout_register_clk(pcf8563); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id pcf8563_id[] = { |
| { "pcf8563", 0 }, |
| { "rtc8564", 0 }, |
| { "pca8565", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, pcf8563_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id pcf8563_of_match[] = { |
| { .compatible = "nxp,pcf8563" }, |
| { .compatible = "epson,rtc8564" }, |
| { .compatible = "microcrystal,rv8564" }, |
| { .compatible = "nxp,pca8565" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, pcf8563_of_match); |
| #endif |
| |
| static struct i2c_driver pcf8563_driver = { |
| .driver = { |
| .name = "rtc-pcf8563", |
| .of_match_table = of_match_ptr(pcf8563_of_match), |
| }, |
| .probe = pcf8563_probe, |
| .id_table = pcf8563_id, |
| }; |
| |
| module_i2c_driver(pcf8563_driver); |
| |
| MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); |
| MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); |
| MODULE_LICENSE("GPL"); |