| #!/bin/sh |
| # daemon operations |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| check_line_first() |
| { |
| local line=$1 |
| local name=$2 |
| local base=$3 |
| local output=$4 |
| local lock=$5 |
| local up=$6 |
| |
| local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'` |
| local line_base=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $3 }'` |
| local line_output=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $4 }'` |
| local line_lock=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $5 }'` |
| local line_up=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $6 }'` |
| |
| if [ "${name}" != "${line_name}" ]; then |
| echo "FAILED: wrong name" |
| error=1 |
| fi |
| |
| if [ "${base}" != "${line_base}" ]; then |
| echo "FAILED: wrong base" |
| error=1 |
| fi |
| |
| if [ "${output}" != "${line_output}" ]; then |
| echo "FAILED: wrong output" |
| error=1 |
| fi |
| |
| if [ "${lock}" != "${line_lock}" ]; then |
| echo "FAILED: wrong lock" |
| error=1 |
| fi |
| |
| if [ "${up}" != "${line_up}" ]; then |
| echo "FAILED: wrong up" |
| error=1 |
| fi |
| } |
| |
| check_line_other() |
| { |
| local line=$1 |
| local name=$2 |
| local run=$3 |
| local base=$4 |
| local output=$5 |
| local control=$6 |
| local ack=$7 |
| local up=$8 |
| |
| local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'` |
| local line_run=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $3 }'` |
| local line_base=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $4 }'` |
| local line_output=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $5 }'` |
| local line_control=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $6 }'` |
| local line_ack=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $7 }'` |
| local line_up=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $8 }'` |
| |
| if [ "${name}" != "${line_name}" ]; then |
| echo "FAILED: wrong name" |
| error=1 |
| fi |
| |
| if [ "${run}" != "${line_run}" ]; then |
| echo "FAILED: wrong run" |
| error=1 |
| fi |
| |
| if [ "${base}" != "${line_base}" ]; then |
| echo "FAILED: wrong base" |
| error=1 |
| fi |
| |
| if [ "${output}" != "${line_output}" ]; then |
| echo "FAILED: wrong output" |
| error=1 |
| fi |
| |
| if [ "${control}" != "${line_control}" ]; then |
| echo "FAILED: wrong control" |
| error=1 |
| fi |
| |
| if [ "${ack}" != "${line_ack}" ]; then |
| echo "FAILED: wrong ack" |
| error=1 |
| fi |
| |
| if [ "${up}" != "${line_up}" ]; then |
| echo "FAILED: wrong up" |
| error=1 |
| fi |
| } |
| |
| daemon_start() |
| { |
| local config=$1 |
| local session=$2 |
| |
| perf daemon start --config ${config} |
| |
| # wait for the session to ping |
| local state="FAIL" |
| while [ "${state}" != "OK" ]; do |
| state=`perf daemon ping --config ${config} --session ${session} | awk '{ print $1 }'` |
| sleep 0.05 |
| done |
| } |
| |
| daemon_exit() |
| { |
| local base=$1 |
| local config=$2 |
| |
| local line=`perf daemon --config ${config} -x: | head -1` |
| local pid=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $1 }'` |
| |
| # stop daemon |
| perf daemon stop --config ${config} |
| |
| # ... and wait for the pid to go away |
| tail --pid=${pid} -f /dev/null |
| } |
| |
| test_list() |
| { |
| echo "test daemon list" |
| |
| local config=$(mktemp /tmp/perf.daemon.config.XXX) |
| local base=$(mktemp -d /tmp/perf.daemon.base.XXX) |
| |
| cat <<EOF > ${config} |
| [daemon] |
| base=BASE |
| |
| [session-size] |
| run = -e cpu-clock |
| |
| [session-time] |
| run = -e task-clock |
| EOF |
| |
| sed -i -e "s|BASE|${base}|" ${config} |
| |
| # start daemon |
| daemon_start ${config} size |
| |
| # check first line |
| # pid:daemon:base:base/output:base/lock |
| local line=`perf daemon --config ${config} -x: | head -1` |
| check_line_first ${line} daemon ${base} ${base}/output ${base}/lock "0" |
| |
| # check 1st session |
| # pid:size:-e cpu-clock:base/size:base/size/output:base/size/control:base/size/ack:0 |
| local line=`perf daemon --config ${config} -x: | head -2 | tail -1` |
| check_line_other "${line}" size "-e cpu-clock" ${base}/session-size \ |
| ${base}/session-size/output ${base}/session-size/control \ |
| ${base}/session-size/ack "0" |
| |
| # check 2nd session |
| # pid:time:-e task-clock:base/time:base/time/output:base/time/control:base/time/ack:0 |
| local line=`perf daemon --config ${config} -x: | head -3 | tail -1` |
| check_line_other "${line}" time "-e task-clock" ${base}/session-time \ |
| ${base}/session-time/output ${base}/session-time/control \ |
| ${base}/session-time/ack "0" |
| |
| # stop daemon |
| daemon_exit ${base} ${config} |
| |
| rm -rf ${base} |
| rm -f ${config} |
| } |
| |
| test_reconfig() |
| { |
| echo "test daemon reconfig" |
| |
| local config=$(mktemp /tmp/perf.daemon.config.XXX) |
| local base=$(mktemp -d /tmp/perf.daemon.base.XXX) |
| |
| # prepare config |
| cat <<EOF > ${config} |
| [daemon] |
| base=BASE |
| |
| [session-size] |
| run = -e cpu-clock |
| |
| [session-time] |
| run = -e task-clock |
| EOF |
| |
| sed -i -e "s|BASE|${base}|" ${config} |
| |
| # start daemon |
| daemon_start ${config} size |
| |
| # check 2nd session |
| # pid:time:-e task-clock:base/time:base/time/output:base/time/control:base/time/ack:0 |
| local line=`perf daemon --config ${config} -x: | head -3 | tail -1` |
| check_line_other "${line}" time "-e task-clock" ${base}/session-time \ |
| ${base}/session-time/output ${base}/session-time/control ${base}/session-time/ack "0" |
| local pid=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $1 }'` |
| |
| # prepare new config |
| local config_new=${config}.new |
| cat <<EOF > ${config_new} |
| [daemon] |
| base=BASE |
| |
| [session-size] |
| run = -e cpu-clock |
| |
| [session-time] |
| run = -e cpu-clock |
| EOF |
| |
| # TEST 1 - change config |
| |
| sed -i -e "s|BASE|${base}|" ${config_new} |
| cp ${config_new} ${config} |
| |
| # wait for old session to finish |
| tail --pid=${pid} -f /dev/null |
| |
| # wait for new one to start |
| local state="FAIL" |
| while [ "${state}" != "OK" ]; do |
| state=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` |
| done |
| |
| # check reconfigured 2nd session |
| # pid:time:-e task-clock:base/time:base/time/output:base/time/control:base/time/ack:0 |
| local line=`perf daemon --config ${config} -x: | head -3 | tail -1` |
| check_line_other "${line}" time "-e cpu-clock" ${base}/session-time \ |
| ${base}/session-time/output ${base}/session-time/control ${base}/session-time/ack "0" |
| |
| # TEST 2 - empty config |
| |
| local config_empty=${config}.empty |
| cat <<EOF > ${config_empty} |
| [daemon] |
| base=BASE |
| EOF |
| |
| # change config |
| sed -i -e "s|BASE|${base}|" ${config_empty} |
| cp ${config_empty} ${config} |
| |
| # wait for sessions to finish |
| local state="OK" |
| while [ "${state}" != "FAIL" ]; do |
| state=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` |
| done |
| |
| local state="OK" |
| while [ "${state}" != "FAIL" ]; do |
| state=`perf daemon ping --config ${config} --session size | awk '{ print $1 }'` |
| done |
| |
| local one=`perf daemon --config ${config} -x: | wc -l` |
| |
| if [ ${one} -ne "1" ]; then |
| echo "FAILED: wrong list output" |
| error=1 |
| fi |
| |
| # TEST 3 - config again |
| |
| cp ${config_new} ${config} |
| |
| # wait for size to start |
| local state="FAIL" |
| while [ "${state}" != "OK" ]; do |
| state=`perf daemon ping --config ${config} --session size | awk '{ print $1 }'` |
| done |
| |
| # wait for time to start |
| local state="FAIL" |
| while [ "${state}" != "OK" ]; do |
| state=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` |
| done |
| |
| # stop daemon |
| daemon_exit ${base} ${config} |
| |
| rm -rf ${base} |
| rm -f ${config} |
| rm -f ${config_new} |
| rm -f ${config_empty} |
| } |
| |
| test_stop() |
| { |
| echo "test daemon stop" |
| |
| local config=$(mktemp /tmp/perf.daemon.config.XXX) |
| local base=$(mktemp -d /tmp/perf.daemon.base.XXX) |
| |
| # prepare config |
| cat <<EOF > ${config} |
| [daemon] |
| base=BASE |
| |
| [session-size] |
| run = -e cpu-clock |
| |
| [session-time] |
| run = -e task-clock |
| EOF |
| |
| sed -i -e "s|BASE|${base}|" ${config} |
| |
| # start daemon |
| daemon_start ${config} size |
| |
| local pid_size=`perf daemon --config ${config} -x: | head -2 | tail -1 | awk 'BEGIN { FS = ":" } ; { print $1 }'` |
| local pid_time=`perf daemon --config ${config} -x: | head -3 | tail -1 | awk 'BEGIN { FS = ":" } ; { print $1 }'` |
| |
| # check that sessions are running |
| if [ ! -d "/proc/${pid_size}" ]; then |
| echo "FAILED: session size not up" |
| fi |
| |
| if [ ! -d "/proc/${pid_time}" ]; then |
| echo "FAILED: session time not up" |
| fi |
| |
| # stop daemon |
| daemon_exit ${base} ${config} |
| |
| # check that sessions are gone |
| if [ -d "/proc/${pid_size}" ]; then |
| echo "FAILED: session size still up" |
| fi |
| |
| if [ -d "/proc/${pid_time}" ]; then |
| echo "FAILED: session time still up" |
| fi |
| |
| rm -rf ${base} |
| rm -f ${config} |
| } |
| |
| test_signal() |
| { |
| echo "test daemon signal" |
| |
| local config=$(mktemp /tmp/perf.daemon.config.XXX) |
| local base=$(mktemp -d /tmp/perf.daemon.base.XXX) |
| |
| # prepare config |
| cat <<EOF > ${config} |
| [daemon] |
| base=BASE |
| |
| [session-test] |
| run = -e cpu-clock --switch-output |
| EOF |
| |
| sed -i -e "s|BASE|${base}|" ${config} |
| |
| # start daemon |
| daemon_start ${config} test |
| |
| # send 2 signals |
| perf daemon signal --config ${config} --session test |
| perf daemon signal --config ${config} |
| |
| # stop daemon |
| daemon_exit ${base} ${config} |
| |
| # count is 2 perf.data for signals and 1 for perf record finished |
| count=`ls ${base}/session-test/ | grep perf.data | wc -l` |
| if [ ${count} -ne 3 ]; then |
| error=1 |
| echo "FAILED: perf data no generated" |
| fi |
| |
| rm -rf ${base} |
| rm -f ${config} |
| } |
| |
| test_ping() |
| { |
| echo "test daemon ping" |
| |
| local config=$(mktemp /tmp/perf.daemon.config.XXX) |
| local base=$(mktemp -d /tmp/perf.daemon.base.XXX) |
| |
| # prepare config |
| cat <<EOF > ${config} |
| [daemon] |
| base=BASE |
| |
| [session-size] |
| run = -e cpu-clock |
| |
| [session-time] |
| run = -e task-clock |
| EOF |
| |
| sed -i -e "s|BASE|${base}|" ${config} |
| |
| # start daemon |
| daemon_start ${config} size |
| |
| size=`perf daemon ping --config ${config} --session size | awk '{ print $1 }'` |
| type=`perf daemon ping --config ${config} --session time | awk '{ print $1 }'` |
| |
| if [ ${size} != "OK" -o ${type} != "OK" ]; then |
| error=1 |
| echo "FAILED: daemon ping failed" |
| fi |
| |
| # stop daemon |
| daemon_exit ${base} ${config} |
| |
| rm -rf ${base} |
| rm -f ${config} |
| } |
| |
| test_lock() |
| { |
| echo "test daemon lock" |
| |
| local config=$(mktemp /tmp/perf.daemon.config.XXX) |
| local base=$(mktemp -d /tmp/perf.daemon.base.XXX) |
| |
| # prepare config |
| cat <<EOF > ${config} |
| [daemon] |
| base=BASE |
| |
| [session-size] |
| run = -e cpu-clock |
| EOF |
| |
| sed -i -e "s|BASE|${base}|" ${config} |
| |
| # start daemon |
| daemon_start ${config} size |
| |
| # start second daemon over the same config/base |
| failed=`perf daemon start --config ${config} 2>&1 | awk '{ print $1 }'` |
| |
| # check that we failed properly |
| if [ ${failed} != "failed:" ]; then |
| error=1 |
| echo "FAILED: daemon lock failed" |
| fi |
| |
| # stop daemon |
| daemon_exit ${base} ${config} |
| |
| rm -rf ${base} |
| rm -f ${config} |
| } |
| |
| error=0 |
| |
| test_list |
| test_reconfig |
| test_stop |
| test_signal |
| test_ping |
| test_lock |
| |
| exit ${error} |
