| AK4118 S/PDIF transceiver | |
| This device supports I2C mode. | |
| Required properties: | |
| - compatible : "asahi-kasei,ak4118" | |
| - reg : The I2C address of the device for I2C | |
| - reset-gpios: A GPIO specifier for the reset pin | |
| - irq-gpios: A GPIO specifier for the IRQ pin | |
| Example: | |
| &i2c { | |
| ak4118: ak4118@13 { | |
| #sound-dai-cells = <0>; | |
| compatible = "asahi-kasei,ak4118"; | |
| reg = <0x13>; | |
| reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW> | |
| irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; | |
| }; | |
| }; |