| // SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause | 
 | /* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */ | 
 |  | 
 | #include <linux/bitfield.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/device.h> | 
 | #include <linux/err.h> | 
 | #include <linux/gpio/driver.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/io.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/types.h> | 
 |  | 
 | /* | 
 |  * There are 2 YU GPIO blocks: | 
 |  * gpio[0]: HOST_GPIO0->HOST_GPIO31 | 
 |  * gpio[1]: HOST_GPIO32->HOST_GPIO55 | 
 |  */ | 
 | #define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32 | 
 | #define MLXBF3_GPIO_MAX_PINS_BLOCK0    32 | 
 | #define MLXBF3_GPIO_MAX_PINS_BLOCK1    24 | 
 |  | 
 | /* | 
 |  * fw_gpio[x] block registers and their offset | 
 |  */ | 
 | #define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET	  0x00 | 
 | #define MLXBF_GPIO_FW_DATA_OUT_SET        0x04 | 
 |  | 
 | #define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x00 | 
 | #define MLXBF_GPIO_FW_DATA_OUT_CLEAR      0x04 | 
 |  | 
 | #define MLXBF_GPIO_CAUSE_RISE_EN          0x00 | 
 | #define MLXBF_GPIO_CAUSE_FALL_EN          0x04 | 
 | #define MLXBF_GPIO_READ_DATA_IN           0x08 | 
 |  | 
 | #define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0  0x00 | 
 | #define MLXBF_GPIO_CAUSE_OR_EVTEN0        0x14 | 
 | #define MLXBF_GPIO_CAUSE_OR_CLRCAUSE      0x18 | 
 |  | 
 | #define MLXBF_GPIO_CLR_ALL_INTS           GENMASK(31, 0) | 
 |  | 
 | struct mlxbf3_gpio_context { | 
 | 	struct gpio_chip gc; | 
 |  | 
 | 	/* YU GPIO block address */ | 
 | 	void __iomem *gpio_set_io; | 
 | 	void __iomem *gpio_clr_io; | 
 | 	void __iomem *gpio_io; | 
 |  | 
 | 	/* YU GPIO cause block address */ | 
 | 	void __iomem *gpio_cause_io; | 
 | }; | 
 |  | 
 | static void mlxbf3_gpio_irq_enable(struct irq_data *irqd) | 
 | { | 
 | 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); | 
 | 	struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); | 
 | 	irq_hw_number_t offset = irqd_to_hwirq(irqd); | 
 | 	unsigned long flags; | 
 | 	u32 val; | 
 |  | 
 | 	gpiochip_enable_irq(gc, offset); | 
 |  | 
 | 	raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); | 
 | 	writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); | 
 |  | 
 | 	val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); | 
 | 	val |= BIT(offset); | 
 | 	writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); | 
 | 	raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); | 
 | } | 
 |  | 
 | static void mlxbf3_gpio_irq_disable(struct irq_data *irqd) | 
 | { | 
 | 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); | 
 | 	struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); | 
 | 	irq_hw_number_t offset = irqd_to_hwirq(irqd); | 
 | 	unsigned long flags; | 
 | 	u32 val; | 
 |  | 
 | 	raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); | 
 | 	val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); | 
 | 	val &= ~BIT(offset); | 
 | 	writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); | 
 |  | 
 | 	writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); | 
 | 	raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); | 
 |  | 
 | 	gpiochip_disable_irq(gc, offset); | 
 | } | 
 |  | 
 | static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr) | 
 | { | 
 | 	struct mlxbf3_gpio_context *gs = ptr; | 
 | 	struct gpio_chip *gc = &gs->gc; | 
 | 	unsigned long pending; | 
 | 	u32 level; | 
 |  | 
 | 	pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0); | 
 | 	writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); | 
 |  | 
 | 	for_each_set_bit(level, &pending, gc->ngpio) | 
 | 		generic_handle_domain_irq(gc->irq.domain, level); | 
 |  | 
 | 	return IRQ_RETVAL(pending); | 
 | } | 
 |  | 
 | static int | 
 | mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) | 
 | { | 
 | 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); | 
 | 	struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); | 
 | 	irq_hw_number_t offset = irqd_to_hwirq(irqd); | 
 | 	unsigned long flags; | 
 | 	u32 val; | 
 |  | 
 | 	raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); | 
 |  | 
 | 	switch (type & IRQ_TYPE_SENSE_MASK) { | 
 | 	case IRQ_TYPE_EDGE_BOTH: | 
 | 		val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); | 
 | 		val |= BIT(offset); | 
 | 		writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); | 
 | 		val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); | 
 | 		val |= BIT(offset); | 
 | 		writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); | 
 | 		break; | 
 | 	case IRQ_TYPE_EDGE_RISING: | 
 | 		val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); | 
 | 		val |= BIT(offset); | 
 | 		writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); | 
 | 		break; | 
 | 	case IRQ_TYPE_EDGE_FALLING: | 
 | 		val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); | 
 | 		val |= BIT(offset); | 
 | 		writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); | 
 | 		break; | 
 | 	default: | 
 | 		raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); | 
 |  | 
 | 	irq_set_handler_locked(irqd, handle_edge_irq); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* This function needs to be defined for handle_edge_irq() */ | 
 | static void mlxbf3_gpio_irq_ack(struct irq_data *data) | 
 | { | 
 | } | 
 |  | 
 | static const struct irq_chip gpio_mlxbf3_irqchip = { | 
 | 	.name = "MLNXBF33", | 
 | 	.irq_ack = mlxbf3_gpio_irq_ack, | 
 | 	.irq_set_type = mlxbf3_gpio_irq_set_type, | 
 | 	.irq_enable = mlxbf3_gpio_irq_enable, | 
 | 	.irq_disable = mlxbf3_gpio_irq_disable, | 
 | 	.flags = IRQCHIP_IMMUTABLE, | 
 | 	GPIOCHIP_IRQ_RESOURCE_HELPERS, | 
 | }; | 
 |  | 
 | static int mlxbf3_gpio_add_pin_ranges(struct gpio_chip *chip) | 
 | { | 
 | 	unsigned int id; | 
 |  | 
 | 	switch(chip->ngpio) { | 
 | 	case MLXBF3_GPIO_MAX_PINS_BLOCK0: | 
 | 		id = 0; | 
 | 		break; | 
 | 	case MLXBF3_GPIO_MAX_PINS_BLOCK1: | 
 | 		id = 1; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return gpiochip_add_pin_range(chip, "MLNXBF34:00", | 
 | 			chip->base, id * MLXBF3_GPIO_MAX_PINS_PER_BLOCK, | 
 | 			chip->ngpio); | 
 | } | 
 |  | 
 | static int mlxbf3_gpio_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct mlxbf3_gpio_context *gs; | 
 | 	struct gpio_irq_chip *girq; | 
 | 	struct gpio_chip *gc; | 
 | 	int ret, irq; | 
 |  | 
 | 	gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); | 
 | 	if (!gs) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	gs->gpio_io = devm_platform_ioremap_resource(pdev, 0); | 
 | 	if (IS_ERR(gs->gpio_io)) | 
 | 		return PTR_ERR(gs->gpio_io); | 
 |  | 
 | 	gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1); | 
 | 	if (IS_ERR(gs->gpio_cause_io)) | 
 | 		return PTR_ERR(gs->gpio_cause_io); | 
 |  | 
 | 	gs->gpio_set_io = devm_platform_ioremap_resource(pdev, 2); | 
 | 	if (IS_ERR(gs->gpio_set_io)) | 
 | 		return PTR_ERR(gs->gpio_set_io); | 
 |  | 
 | 	gs->gpio_clr_io = devm_platform_ioremap_resource(pdev, 3); | 
 | 	if (IS_ERR(gs->gpio_clr_io)) | 
 | 		return PTR_ERR(gs->gpio_clr_io); | 
 | 	gc = &gs->gc; | 
 |  | 
 | 	ret = bgpio_init(gc, dev, 4, | 
 | 			gs->gpio_io + MLXBF_GPIO_READ_DATA_IN, | 
 | 			gs->gpio_set_io + MLXBF_GPIO_FW_DATA_OUT_SET, | 
 | 			gs->gpio_clr_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR, | 
 | 			gs->gpio_set_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET, | 
 | 			gs->gpio_clr_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0); | 
 | 	if (ret) | 
 | 		return dev_err_probe(dev, ret, "%s: bgpio_init() failed", __func__); | 
 |  | 
 | 	gc->request = gpiochip_generic_request; | 
 | 	gc->free = gpiochip_generic_free; | 
 | 	gc->owner = THIS_MODULE; | 
 | 	gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges; | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq >= 0) { | 
 | 		girq = &gs->gc.irq; | 
 | 		gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); | 
 | 		girq->default_type = IRQ_TYPE_NONE; | 
 | 		/* This will let us handle the parent IRQ in the driver */ | 
 | 		girq->num_parents = 0; | 
 | 		girq->parents = NULL; | 
 | 		girq->parent_handler = NULL; | 
 | 		girq->handler = handle_bad_irq; | 
 |  | 
 | 		/* | 
 | 		 * Directly request the irq here instead of passing | 
 | 		 * a flow-handler because the irq is shared. | 
 | 		 */ | 
 | 		ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, | 
 | 				       IRQF_SHARED, dev_name(dev), gs); | 
 | 		if (ret) | 
 | 			return dev_err_probe(dev, ret, "failed to request IRQ"); | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, gs); | 
 |  | 
 | 	ret = devm_gpiochip_add_data(dev, &gs->gc, gs); | 
 | 	if (ret) | 
 | 		dev_err_probe(dev, ret, "Failed adding memory mapped gpiochip\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mlxbf3_gpio_shutdown(struct platform_device *pdev) | 
 | { | 
 | 	struct mlxbf3_gpio_context *gs = platform_get_drvdata(pdev); | 
 |  | 
 | 	/* Disable and clear all interrupts */ | 
 | 	writel(0, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); | 
 | 	writel(MLXBF_GPIO_CLR_ALL_INTS, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); | 
 | } | 
 |  | 
 | static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = { | 
 | 	{ "MLNXBF33", 0 }, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match); | 
 |  | 
 | static struct platform_driver mlxbf3_gpio_driver = { | 
 | 	.driver = { | 
 | 		.name = "mlxbf3_gpio", | 
 | 		.acpi_match_table = mlxbf3_gpio_acpi_match, | 
 | 	}, | 
 | 	.probe    = mlxbf3_gpio_probe, | 
 | 	.shutdown = mlxbf3_gpio_shutdown, | 
 | }; | 
 | module_platform_driver(mlxbf3_gpio_driver); | 
 |  | 
 | MODULE_SOFTDEP("pre: pinctrl-mlxbf3"); | 
 | MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver"); | 
 | MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); | 
 | MODULE_LICENSE("Dual BSD/GPL"); |