blob: 6c6439f69a725f4bd46210fb3bb2c3e80a49fab2 [file] [log] [blame] [edit]
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Translate stack dump function offsets.
#
# addr2line doesn't work with KASLR addresses. This works similarly to
# addr2line, but instead takes the 'func+0x123' format as input:
#
# $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568
# meminfo_proc_show+0x5/0x568:
# meminfo_proc_show at fs/proc/meminfo.c:27
#
# If the address is part of an inlined function, the full inline call chain is
# printed:
#
# $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27
# native_write_msr+0x6/0x27:
# arch_static_branch at arch/x86/include/asm/msr.h:121
# (inlined by) static_key_false at include/linux/jump_label.h:125
# (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125
#
# The function size after the '/' in the input is optional, but recommended.
# It's used to help disambiguate any duplicate symbol names, which can occur
# rarely. If the size is omitted for a duplicate symbol then it's possible for
# multiple code sites to be printed:
#
# $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5
# raw_ioctl+0x5/0x20:
# raw_ioctl at drivers/char/raw.c:122
#
# raw_ioctl+0x5/0xb1:
# raw_ioctl at net/ipv4/raw.c:876
#
# Multiple addresses can be specified on a single command line:
#
# $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90
# type_show+0x10/0x2d:
# type_show at drivers/video/backlight/backlight.c:213
#
# free_reserved_area+0x90/0x123:
# free_reserved_area at mm/page_alloc.c:6429 (discriminator 2)
set -o errexit
set -o nounset
READELF="${CROSS_COMPILE:-}readelf"
ADDR2LINE="${CROSS_COMPILE:-}addr2line"
SIZE="${CROSS_COMPILE:-}size"
NM="${CROSS_COMPILE:-}nm"
command -v awk >/dev/null 2>&1 || die "awk isn't installed"
command -v ${READELF} >/dev/null 2>&1 || die "readelf isn't installed"
command -v ${ADDR2LINE} >/dev/null 2>&1 || die "addr2line isn't installed"
command -v ${SIZE} >/dev/null 2>&1 || die "size isn't installed"
command -v ${NM} >/dev/null 2>&1 || die "nm isn't installed"
usage() {
echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2
exit 1
}
warn() {
echo "$1" >&2
}
die() {
echo "ERROR: $1" >&2
exit 1
}
# Try to figure out the source directory prefix so we can remove it from the
# addr2line output. HACK ALERT: This assumes that start_kernel() is in
# init/main.c! This only works for vmlinux. Otherwise it falls back to
# printing the absolute path.
find_dir_prefix() {
local objfile=$1
local start_kernel_addr=$(${READELF} -sW $objfile | awk '$8 == "start_kernel" {printf "0x%s", $2}')
[[ -z $start_kernel_addr ]] && return
local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr)
[[ -z $file_line ]] && return
local prefix=${file_line%init/main.c:*}
if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then
return
fi
DIR_PREFIX=$prefix
return 0
}
__faddr2line() {
local objfile=$1
local func_addr=$2
local dir_prefix=$3
local print_warnings=$4
local func=${func_addr%+*}
local offset=${func_addr#*+}
offset=${offset%/*}
local size=
[[ $func_addr =~ "/" ]] && size=${func_addr#*/}
if [[ -z $func ]] || [[ -z $offset ]] || [[ $func = $func_addr ]]; then
warn "bad func+offset $func_addr"
DONE=1
return
fi
# Go through each of the object's symbols which match the func name.
# In rare cases there might be duplicates.
file_end=$(${SIZE} -Ax $objfile | awk '$1 == ".text" {print $2}')
while read symbol; do
local fields=($symbol)
local sym_base=0x${fields[0]}
local sym_type=${fields[1]}
local sym_end=${fields[3]}
# calculate the size
local sym_size=$(($sym_end - $sym_base))
if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
warn "bad symbol size: base: $sym_base end: $sym_end"
DONE=1
return
fi
sym_size=0x$(printf %x $sym_size)
# calculate the address
local addr=$(($sym_base + $offset))
if [[ -z $addr ]] || [[ $addr = 0 ]]; then
warn "bad address: $sym_base + $offset"
DONE=1
return
fi
addr=0x$(printf %x $addr)
# weed out non-function symbols
if [[ $sym_type != t ]] && [[ $sym_type != T ]]; then
[[ $print_warnings = 1 ]] &&
echo "skipping $func address at $addr due to non-function symbol of type '$sym_type'"
continue
fi
# if the user provided a size, make sure it matches the symbol's size
if [[ -n $size ]] && [[ $size -ne $sym_size ]]; then
[[ $print_warnings = 1 ]] &&
echo "skipping $func address at $addr due to size mismatch ($size != $sym_size)"
continue;
fi
# make sure the provided offset is within the symbol's range
if [[ $offset -gt $sym_size ]]; then
[[ $print_warnings = 1 ]] &&
echo "skipping $func address at $addr due to size mismatch ($offset > $sym_size)"
continue
fi
# separate multiple entries with a blank line
[[ $FIRST = 0 ]] && echo
FIRST=0
# pass real address to addr2line
echo "$func+$offset/$sym_size:"
local file_lines=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix\(\./\)*; ;")
[[ -z $file_lines ]] && return
if [[ $LIST = 0 ]]; then
echo "$file_lines" | while read -r line
do
echo $line
done
DONE=1;
return
fi
# show each line with context
echo "$file_lines" | while read -r line
do
echo
echo $line
n=$(echo $line | sed 's/.*:\([0-9]\+\).*/\1/g')
n1=$[$n-5]
n2=$[$n+5]
f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g')
awk 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
done
DONE=1
done < <(${NM} -n $objfile | awk -v fn=$func -v end=$file_end '$3 == fn { found=1; line=$0; start=$1; next } found == 1 { found=0; print line, "0x"$1 } END {if (found == 1) print line, end; }')
}
[[ $# -lt 2 ]] && usage
objfile=$1
LIST=0
[[ "$objfile" == "--list" ]] && LIST=1 && shift && objfile=$1
[[ ! -f $objfile ]] && die "can't find objfile $objfile"
shift
DIR_PREFIX=supercalifragilisticexpialidocious
find_dir_prefix $objfile
FIRST=1
while [[ $# -gt 0 ]]; do
func_addr=$1
shift
# print any matches found
DONE=0
__faddr2line $objfile $func_addr $DIR_PREFIX 0
# if no match was found, print warnings
if [[ $DONE = 0 ]]; then
__faddr2line $objfile $func_addr $DIR_PREFIX 1
warn "no match for $func_addr"
fi
done