blob: 188639738dc3e1c803bac924d0df20ecc31d817b [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2012 Markus Pargmann, Pengutronix
*/
#include "imx27-phytec-phycard-s-som.dtsi"
/ {
model = "Phytec pca100 rapid development kit";
compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
chosen {
stdout-path = &uart1;
};
display: display {
model = "Primeview-PD050VL1";
bits-per-pixel = <16>; /* non-standard but required */
fsl,pcr = <0xf0c88080>; /* non-standard but required */
display-timings {
native-mode = <&timing0>;
timing0: 640x480 {
hactive = <640>;
vactive = <480>;
hback-porch = <112>;
hfront-porch = <36>;
hsync-len = <32>;
vback-porch = <33>;
vfront-porch = <33>;
vsync-len = <2>;
clock-frequency = <25000000>;
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&fb {
display = <&display>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
adc@64 {
compatible = "maxim,max1037";
vcc-supply = <&reg_3v3>;
reg = <0x64>;
};
};
&iomuxc {
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX27_PAD_I2C_DATA__I2C_DATA 0x0
MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};
pinctrl_owire1: owire1grp {
fsl,pins = <
MX27_PAD_RTCK__OWIRE 0x0
>;
};
pinctrl_sdhc2: sdhc2grp {
fsl,pins = <
MX27_PAD_SD2_CLK__SD2_CLK 0x0
MX27_PAD_SD2_CMD__SD2_CMD 0x0
MX27_PAD_SD2_D0__SD2_D0 0x0
MX27_PAD_SD2_D1__SD2_D1 0x0
MX27_PAD_SD2_D2__SD2_D2 0x0
MX27_PAD_SD2_D3__SD2_D3 0x0
MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX27_PAD_UART1_TXD__UART1_TXD 0x0
MX27_PAD_UART1_RXD__UART1_RXD 0x0
MX27_PAD_UART1_CTS__UART1_CTS 0x0
MX27_PAD_UART1_RTS__UART1_RTS 0x0
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX27_PAD_UART2_TXD__UART2_TXD 0x0
MX27_PAD_UART2_RXD__UART2_RXD 0x0
MX27_PAD_UART2_CTS__UART2_CTS 0x0
MX27_PAD_UART2_RTS__UART2_RTS 0x0
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX27_PAD_UART3_TXD__UART3_TXD 0x0
MX27_PAD_UART3_RXD__UART3_RXD 0x0
MX27_PAD_UART3_CTS__UART3_CTS 0x0
MX27_PAD_UART3_RTS__UART3_RTS 0x0
>;
};
};
};
&owire {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_owire1>;
status = "okay";
};
&sdhci2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhc2>;
cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};