blob: e34e4475027cae20c07387b925972c0fa9d044c4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car Gen3 for USB2.0 PHY driver
*
* Copyright (C) 2015-2017 Renesas Electronics Corporation
*
* This is based on the phy-rcar-gen2 driver:
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc.
*/
#include <linux/extcon-provider.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/string.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>
/******* USB2.0 Host registers (original offset is +0x200) *******/
#define USB2_INT_ENABLE 0x000
#define USB2_USBCTR 0x00c
#define USB2_SPD_RSM_TIMSET 0x10c
#define USB2_OC_TIMSET 0x110
#define USB2_COMMCTRL 0x600
#define USB2_OBINTSTA 0x604
#define USB2_OBINTEN 0x608
#define USB2_VBCTRL 0x60c
#define USB2_LINECTRL1 0x610
#define USB2_ADPCTRL 0x630
/* INT_ENABLE */
#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */
#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */
/* USBCTR */
#define USB2_USBCTR_DIRPD BIT(2)
#define USB2_USBCTR_PLL_RST BIT(1)
/* SPD_RSM_TIMSET */
#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b
/* OC_TIMSET */
#define USB2_OC_TIMSET_INIT 0x000209ab
/* COMMCTRL */
#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
/* OBINTSTA and OBINTEN */
#define USB2_OBINT_SESSVLDCHG BIT(12)
#define USB2_OBINT_IDDIGCHG BIT(11)
#define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \
USB2_OBINT_IDDIGCHG)
/* VBCTRL */
#define USB2_VBCTRL_OCCLREN BIT(16)
#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
/* LINECTRL1 */
#define USB2_LINECTRL1_DPRPD_EN BIT(19)
#define USB2_LINECTRL1_DP_RPD BIT(18)
#define USB2_LINECTRL1_DMRPD_EN BIT(17)
#define USB2_LINECTRL1_DM_RPD BIT(16)
#define USB2_LINECTRL1_OPMODE_NODRV BIT(6)
/* ADPCTRL */
#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
#define USB2_ADPCTRL_IDDIG BIT(19)
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
#define NUM_OF_PHYS 4
enum rcar_gen3_phy_index {
PHY_INDEX_BOTH_HC,
PHY_INDEX_OHCI,
PHY_INDEX_EHCI,
PHY_INDEX_HSUSB
};
static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = {
USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN,
USB2_INT_ENABLE_USBH_INTA_EN,
USB2_INT_ENABLE_USBH_INTB_EN,
0
};
struct rcar_gen3_phy {
struct phy *phy;
struct rcar_gen3_chan *ch;
u32 int_enable_bits;
bool initialized;
bool otg_initialized;
bool powered;
};
struct rcar_gen3_chan {
void __iomem *base;
struct device *dev; /* platform_device's device */
struct extcon_dev *extcon;
struct rcar_gen3_phy rphys[NUM_OF_PHYS];
struct regulator *vbus;
struct work_struct work;
struct mutex lock; /* protects rphys[...].powered */
enum usb_dr_mode dr_mode;
int irq;
bool extcon_host;
bool is_otg_channel;
bool uses_otg_pins;
};
/*
* Combination about is_otg_channel and uses_otg_pins:
*
* Parameters || Behaviors
* is_otg_channel | uses_otg_pins || irqs | role sysfs
* ---------------------+---------------++--------------+------------
* true | true || enabled | enabled
* true | false || disabled | enabled
* false | any || disabled | disabled
*/
static void rcar_gen3_phy_usb2_work(struct work_struct *work)
{
struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
work);
if (ch->extcon_host) {
extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, true);
extcon_set_state_sync(ch->extcon, EXTCON_USB, false);
} else {
extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, false);
extcon_set_state_sync(ch->extcon, EXTCON_USB, true);
}
}
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
{
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_COMMCTRL);
dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host);
if (host)
val &= ~USB2_COMMCTRL_OTG_PERI;
else
val |= USB2_COMMCTRL_OTG_PERI;
writel(val, usb2_base + USB2_COMMCTRL);
}
static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
{
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_LINECTRL1);
dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
if (dp)
val |= USB2_LINECTRL1_DP_RPD;
if (dm)
val |= USB2_LINECTRL1_DM_RPD;
writel(val, usb2_base + USB2_LINECTRL1);
}
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
{
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_ADPCTRL);
dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
if (vbus)
val |= USB2_ADPCTRL_DRVVBUS;
else
val &= ~USB2_ADPCTRL_DRVVBUS;
writel(val, usb2_base + USB2_ADPCTRL);
}
static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
{
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_OBINTEN);
if (ch->uses_otg_pins && enable)
val |= USB2_OBINT_BITS;
else
val &= ~USB2_OBINT_BITS;
writel(val, usb2_base + USB2_OBINTEN);
}
static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 1, 1);
rcar_gen3_set_host_mode(ch, 1);
rcar_gen3_enable_vbus_ctrl(ch, 1);
ch->extcon_host = true;
schedule_work(&ch->work);
}
static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 0, 1);
rcar_gen3_set_host_mode(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 0);
ch->extcon_host = false;
schedule_work(&ch->work);
}
static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
{
void __iomem *usb2_base = ch->base;
u32 val;
val = readl(usb2_base + USB2_LINECTRL1);
writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
rcar_gen3_set_linectrl(ch, 1, 1);
rcar_gen3_set_host_mode(ch, 1);
rcar_gen3_enable_vbus_ctrl(ch, 0);
val = readl(usb2_base + USB2_LINECTRL1);
writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
}
static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 0, 1);
rcar_gen3_set_host_mode(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 1);
}
static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
{
rcar_gen3_control_otg_irq(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 1);
rcar_gen3_init_for_host(ch);
rcar_gen3_control_otg_irq(ch, 1);
}
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
if (!ch->uses_otg_pins)
return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
{
if (!rcar_gen3_check_id(ch))
rcar_gen3_init_for_host(ch);
else
rcar_gen3_init_for_peri(ch);
}
static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
{
return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
}
static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
{
if (rcar_gen3_is_host(ch))
return PHY_MODE_USB_HOST;
return PHY_MODE_USB_DEVICE;
}
static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch)
{
int i;
for (i = 0; i < NUM_OF_PHYS; i++) {
if (ch->rphys[i].initialized)
return true;
}
return false;
}
static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch)
{
int i;
for (i = 0; i < NUM_OF_PHYS; i++) {
if (ch->rphys[i].otg_initialized)
return false;
}
return true;
}
static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch)
{
int i;
for (i = 0; i < NUM_OF_PHYS; i++) {
if (ch->rphys[i].powered)
return false;
}
return true;
}
static ssize_t role_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
bool is_b_device;
enum phy_mode cur_mode, new_mode;
if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
return -EIO;
if (sysfs_streq(buf, "host"))
new_mode = PHY_MODE_USB_HOST;
else if (sysfs_streq(buf, "peripheral"))
new_mode = PHY_MODE_USB_DEVICE;
else
return -EINVAL;
/* is_b_device: true is B-Device. false is A-Device. */
is_b_device = rcar_gen3_check_id(ch);
cur_mode = rcar_gen3_get_phy_mode(ch);
/* If current and new mode is the same, this returns the error */
if (cur_mode == new_mode)
return -EINVAL;
if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */
if (!is_b_device) /* A-Peripheral */
rcar_gen3_init_from_a_peri_to_a_host(ch);
else /* B-Peripheral */
rcar_gen3_init_for_b_host(ch);
} else { /* And is_host must be true */
if (!is_b_device) /* A-Host */
rcar_gen3_init_for_a_peri(ch);
else /* B-Host */
rcar_gen3_init_for_peri(ch);
}
return count;
}
static ssize_t role_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
return -EIO;
return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
"peripheral");
}
static DEVICE_ATTR_RW(role);
static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
{
void __iomem *usb2_base = ch->base;
u32 val;
/* Should not use functions of read-modify-write a register */
val = readl(usb2_base + USB2_LINECTRL1);
val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN |
USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
writel(val, usb2_base + USB2_LINECTRL1);
val = readl(usb2_base + USB2_VBCTRL);
val &= ~USB2_VBCTRL_OCCLREN;
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
msleep(20);
writel(0xffffffff, usb2_base + USB2_OBINTSTA);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
rcar_gen3_device_recognition(ch);
}
static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
{
struct rcar_gen3_chan *ch = _ch;
void __iomem *usb2_base = ch->base;
u32 status = readl(usb2_base + USB2_OBINTSTA);
irqreturn_t ret = IRQ_NONE;
if (status & USB2_OBINT_BITS) {
dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
rcar_gen3_device_recognition(ch);
ret = IRQ_HANDLED;
}
return ret;
}
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
int ret;
if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) {
INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq,
IRQF_SHARED, dev_name(channel->dev), channel);
if (ret < 0) {
dev_err(channel->dev, "No irq handler (%d)\n", channel->irq);
return ret;
}
}
/* Initialize USB2 part */
val = readl(usb2_base + USB2_INT_ENABLE);
val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits;
writel(val, usb2_base + USB2_INT_ENABLE);
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
/* Initialize otg part */
if (channel->is_otg_channel) {
if (rcar_gen3_needs_init_otg(channel))
rcar_gen3_init_otg(channel);
rphy->otg_initialized = true;
}
rphy->initialized = true;
return 0;
}
static int rcar_gen3_phy_usb2_exit(struct phy *p)
{
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
rphy->initialized = false;
if (channel->is_otg_channel)
rphy->otg_initialized = false;
val = readl(usb2_base + USB2_INT_ENABLE);
val &= ~rphy->int_enable_bits;
if (!rcar_gen3_is_any_rphy_initialized(channel))
val &= ~USB2_INT_ENABLE_UCOM_INTEN;
writel(val, usb2_base + USB2_INT_ENABLE);
if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel))
free_irq(channel->irq, channel);
return 0;
}
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
int ret = 0;
mutex_lock(&channel->lock);
if (!rcar_gen3_are_all_rphys_power_off(channel))
goto out;
if (channel->vbus) {
ret = regulator_enable(channel->vbus);
if (ret)
goto out;
}
val = readl(usb2_base + USB2_USBCTR);
val |= USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
val &= ~USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
out:
/* The powered flag should be set for any other phys anyway */
rphy->powered = true;
mutex_unlock(&channel->lock);
return 0;
}
static int rcar_gen3_phy_usb2_power_off(struct phy *p)
{
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
int ret = 0;
mutex_lock(&channel->lock);
rphy->powered = false;
if (!rcar_gen3_are_all_rphys_power_off(channel))
goto out;
if (channel->vbus)
ret = regulator_disable(channel->vbus);
out:
mutex_unlock(&channel->lock);
return ret;
}
static const struct phy_ops rcar_gen3_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.power_on = rcar_gen3_phy_usb2_power_on,
.power_off = rcar_gen3_phy_usb2_power_off,
.owner = THIS_MODULE,
};
static const struct phy_ops rz_g1c_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.owner = THIS_MODULE,
};
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{
.compatible = "renesas,usb2-phy-r8a77470",
.data = &rz_g1c_phy_usb2_ops,
},
{
.compatible = "renesas,usb2-phy-r8a7795",
.data = &rcar_gen3_phy_usb2_ops,
},
{
.compatible = "renesas,usb2-phy-r8a7796",
.data = &rcar_gen3_phy_usb2_ops,
},
{
.compatible = "renesas,usb2-phy-r8a77965",
.data = &rcar_gen3_phy_usb2_ops,
},
{
.compatible = "renesas,rcar-gen3-usb2-phy",
.data = &rcar_gen3_phy_usb2_ops,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
static const unsigned int rcar_gen3_phy_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
if (args->args_count == 0) /* For old version dts */
return ch->rphys[PHY_INDEX_BOTH_HC].phy;
else if (args->args_count > 1) /* Prevent invalid args count */
return ERR_PTR(-ENODEV);
if (args->args[0] >= NUM_OF_PHYS)
return ERR_PTR(-ENODEV);
return ch->rphys[args->args[0]].phy;
}
static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
{
enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN;
int i;
/*
* If one of device nodes has other dr_mode except UNKNOWN,
* this function returns UNKNOWN. To achieve backward compatibility,
* this loop starts the index as 0.
*/
for (i = 0; i < NUM_OF_PHYS; i++) {
enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i);
if (mode != USB_DR_MODE_UNKNOWN) {
if (candidate == USB_DR_MODE_UNKNOWN)
candidate = mode;
else if (candidate != mode)
return USB_DR_MODE_UNKNOWN;
}
}
return candidate;
}
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rcar_gen3_chan *channel;
struct phy_provider *provider;
struct resource *res;
const struct phy_ops *phy_usb2_ops;
int ret = 0, i;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
return -EINVAL;
}
channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
if (!channel)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
channel->base = devm_ioremap_resource(dev, res);
if (IS_ERR(channel->base))
return PTR_ERR(channel->base);
/* get irq number here and request_irq for OTG in phy_init */
channel->irq = platform_get_irq_optional(pdev, 0);
channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
int ret;
channel->is_otg_channel = true;
channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
"renesas,no-otg-pins");
channel->extcon = devm_extcon_dev_allocate(dev,
rcar_gen3_phy_cable);
if (IS_ERR(channel->extcon))
return PTR_ERR(channel->extcon);
ret = devm_extcon_dev_register(dev, channel->extcon);
if (ret < 0) {
dev_err(dev, "Failed to register extcon\n");
return ret;
}
}
/*
* devm_phy_create() will call pm_runtime_enable(&phy->dev);
* And then, phy-core will manage runtime pm for this device.
*/
pm_runtime_enable(dev);
phy_usb2_ops = of_device_get_match_data(dev);
if (!phy_usb2_ops)
return -EINVAL;
mutex_init(&channel->lock);
for (i = 0; i < NUM_OF_PHYS; i++) {
channel->rphys[i].phy = devm_phy_create(dev, NULL,
phy_usb2_ops);
if (IS_ERR(channel->rphys[i].phy)) {
dev_err(dev, "Failed to create USB2 PHY\n");
ret = PTR_ERR(channel->rphys[i].phy);
goto error;
}
channel->rphys[i].ch = channel;
channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i];
phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]);
}
channel->vbus = devm_regulator_get_optional(dev, "vbus");
if (IS_ERR(channel->vbus)) {
if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) {
ret = PTR_ERR(channel->vbus);
goto error;
}
channel->vbus = NULL;
}
platform_set_drvdata(pdev, channel);
channel->dev = dev;
provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "Failed to register PHY provider\n");
ret = PTR_ERR(provider);
goto error;
} else if (channel->is_otg_channel) {
int ret;
ret = device_create_file(dev, &dev_attr_role);
if (ret < 0)
goto error;
}
return 0;
error:
pm_runtime_disable(dev);
return ret;
}
static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
{
struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
if (channel->is_otg_channel)
device_remove_file(&pdev->dev, &dev_attr_role);
pm_runtime_disable(&pdev->dev);
return 0;
};
static struct platform_driver rcar_gen3_phy_usb2_driver = {
.driver = {
.name = "phy_rcar_gen3_usb2",
.of_match_table = rcar_gen3_phy_usb2_match_table,
},
.probe = rcar_gen3_phy_usb2_probe,
.remove = rcar_gen3_phy_usb2_remove,
};
module_platform_driver(rcar_gen3_phy_usb2_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");