blob: 507f79d14adb80f461730fb86818cc70ce858cc1 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
*
* Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/phy/omap_usb.h>
#include <linux/usb/phy_companion.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/phy/phy.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/of_platform.h>
#include <linux/sys_soc.h>
#define USB2PHY_ANA_CONFIG1 0x4c
#define USB2PHY_DISCON_BYP_LATCH BIT(31)
#define USB2PHY_CHRG_DET 0x14
#define USB2PHY_CHRG_DET_USE_CHG_DET_REG BIT(29)
#define USB2PHY_CHRG_DET_DIS_CHG_DET BIT(28)
/* SoC Specific USB2_OTG register definitions */
#define AM654_USB2_OTG_PD BIT(8)
#define AM654_USB2_VBUS_DET_EN BIT(5)
#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
#define OMAP_DEV_PHY_PD BIT(0)
#define OMAP_USB2_PHY_PD BIT(28)
#define AM437X_USB2_PHY_PD BIT(0)
#define AM437X_USB2_OTG_PD BIT(1)
#define AM437X_USB2_OTGVDET_EN BIT(19)
#define AM437X_USB2_OTGSESSEND_EN BIT(20)
/* Driver Flags */
#define OMAP_USB2_HAS_START_SRP BIT(0)
#define OMAP_USB2_HAS_SET_VBUS BIT(1)
#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(2)
#define OMAP_USB2_DISABLE_CHRG_DET BIT(3)
struct omap_usb {
struct usb_phy phy;
struct phy_companion *comparator;
void __iomem *pll_ctrl_base;
void __iomem *phy_base;
struct device *dev;
struct device *control_dev;
struct clk *wkupclk;
struct clk *optclk;
u8 flags;
struct regmap *syscon_phy_power; /* ctrl. reg. acces */
unsigned int power_reg; /* power reg. index within syscon */
u32 mask;
u32 power_on;
u32 power_off;
};
#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
struct usb_phy_data {
const char *label;
u8 flags;
u32 mask;
u32 power_on;
u32 power_off;
};
static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
{
return __raw_readl(addr + offset);
}
static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
u32 data)
{
__raw_writel(data, addr + offset);
}
/**
* omap_usb2_set_comparator - links the comparator present in the sytem with
* this phy
* @comparator - the companion phy(comparator) for this phy
*
* The phy companion driver should call this API passing the phy_companion
* filled with set_vbus and start_srp to be used by usb phy.
*
* For use by phy companion driver
*/
int omap_usb2_set_comparator(struct phy_companion *comparator)
{
struct omap_usb *phy;
struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR(x))
return -ENODEV;
phy = phy_to_omapusb(x);
phy->comparator = comparator;
return 0;
}
EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
{
struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
if (!phy->comparator)
return -ENODEV;
return phy->comparator->set_vbus(phy->comparator, enabled);
}
static int omap_usb_start_srp(struct usb_otg *otg)
{
struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
if (!phy->comparator)
return -ENODEV;
return phy->comparator->start_srp(phy->comparator);
}
static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
{
otg->host = host;
if (!host)
otg->state = OTG_STATE_UNDEFINED;
return 0;
}
static int omap_usb_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
otg->gadget = gadget;
if (!gadget)
otg->state = OTG_STATE_UNDEFINED;
return 0;
}
static int omap_usb_phy_power(struct omap_usb *phy, int on)
{
u32 val;
int ret;
if (!phy->syscon_phy_power) {
omap_control_phy_power(phy->control_dev, on);
return 0;
}
if (on)
val = phy->power_on;
else
val = phy->power_off;
ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
phy->mask, val);
return ret;
}
static int omap_usb_power_off(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
return omap_usb_phy_power(phy, false);
}
static int omap_usb_power_on(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
return omap_usb_phy_power(phy, true);
}
static int omap_usb2_disable_clocks(struct omap_usb *phy)
{
clk_disable_unprepare(phy->wkupclk);
if (!IS_ERR(phy->optclk))
clk_disable_unprepare(phy->optclk);
return 0;
}
static int omap_usb2_enable_clocks(struct omap_usb *phy)
{
int ret;
ret = clk_prepare_enable(phy->wkupclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err0;
}
if (!IS_ERR(phy->optclk)) {
ret = clk_prepare_enable(phy->optclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
goto err1;
}
}
return 0;
err1:
clk_disable(phy->wkupclk);
err0:
return ret;
}
static int omap_usb_init(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
u32 val;
omap_usb2_enable_clocks(phy);
if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
/*
*
* Reduce the sensitivity of internal PHY by enabling the
* DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
* resolves issues with certain devices which can otherwise
* be prone to false disconnects.
*
*/
val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
val |= USB2PHY_DISCON_BYP_LATCH;
omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
}
if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) {
val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET);
val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG |
USB2PHY_CHRG_DET_DIS_CHG_DET;
omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val);
}
return 0;
}
static int omap_usb_exit(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
return omap_usb2_disable_clocks(phy);
}
static const struct phy_ops ops = {
.init = omap_usb_init,
.exit = omap_usb_exit,
.power_on = omap_usb_power_on,
.power_off = omap_usb_power_off,
.owner = THIS_MODULE,
};
static const struct usb_phy_data omap_usb2_data = {
.label = "omap_usb2",
.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
.mask = OMAP_DEV_PHY_PD,
.power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data omap5_usb2_data = {
.label = "omap5_usb2",
.flags = 0,
.mask = OMAP_DEV_PHY_PD,
.power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data dra7x_usb2_data = {
.label = "dra7x_usb2",
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
.mask = OMAP_DEV_PHY_PD,
.power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data dra7x_usb2_phy2_data = {
.label = "dra7x_usb2_phy2",
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
.mask = OMAP_USB2_PHY_PD,
.power_off = OMAP_USB2_PHY_PD,
};
static const struct usb_phy_data am437x_usb2_data = {
.label = "am437x_usb2",
.flags = 0,
.mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
.power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
};
static const struct usb_phy_data am654_usb2_data = {
.label = "am654_usb2",
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
.mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
AM654_USB2_VBUSVALID_DET_EN,
.power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
.power_off = AM654_USB2_OTG_PD,
};
static const struct of_device_id omap_usb2_id_table[] = {
{
.compatible = "ti,omap-usb2",
.data = &omap_usb2_data,
},
{
.compatible = "ti,omap5-usb2",
.data = &omap5_usb2_data,
},
{
.compatible = "ti,dra7x-usb2",
.data = &dra7x_usb2_data,
},
{
.compatible = "ti,dra7x-usb2-phy2",
.data = &dra7x_usb2_phy2_data,
},
{
.compatible = "ti,am437x-usb2",
.data = &am437x_usb2_data,
},
{
.compatible = "ti,am654-usb2",
.data = &am654_usb2_data,
},
{},
};
MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
static void omap_usb2_init_errata(struct omap_usb *phy)
{
static const struct soc_device_attribute am65x_sr10_soc_devices[] = {
{ .family = "AM65X", .revision = "SR1.0" },
{ /* sentinel */ }
};
/*
* Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by
* Default Without VBUS Presence.
*
* AM654x SR1.0 has a silicon bug due to which D+ is pulled high after
* POR, which could cause enumeration failure with some USB hubs.
* Disabling the USB2_PHY Charger Detect function will put D+
* into the normal state.
*/
if (soc_device_match(am65x_sr10_soc_devices))
phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
}
static int omap_usb2_probe(struct platform_device *pdev)
{
struct omap_usb *phy;
struct phy *generic_phy;
struct resource *res;
struct phy_provider *phy_provider;
struct usb_otg *otg;
struct device_node *node = pdev->dev.of_node;
struct device_node *control_node;
struct platform_device *control_pdev;
const struct of_device_id *of_id;
struct usb_phy_data *phy_data;
of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
if (!of_id)
return -EINVAL;
phy_data = (struct usb_phy_data *)of_id->data;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
if (!otg)
return -ENOMEM;
phy->dev = &pdev->dev;
phy->phy.dev = phy->dev;
phy->phy.label = phy_data->label;
phy->phy.otg = otg;
phy->phy.type = USB_PHY_TYPE_USB2;
phy->mask = phy_data->mask;
phy->power_on = phy_data->power_on;
phy->power_off = phy_data->power_off;
phy->flags = phy_data->flags;
omap_usb2_init_errata(phy);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(phy->phy_base))
return PTR_ERR(phy->phy_base);
phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
"syscon-phy-power");
if (IS_ERR(phy->syscon_phy_power)) {
dev_dbg(&pdev->dev,
"can't get syscon-phy-power, using control device\n");
phy->syscon_phy_power = NULL;
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
dev_err(&pdev->dev,
"Failed to get control device phandle\n");
return -EINVAL;
}
control_pdev = of_find_device_by_node(control_node);
if (!control_pdev) {
dev_err(&pdev->dev, "Failed to get control device\n");
return -EINVAL;
}
phy->control_dev = &control_pdev->dev;
} else {
if (of_property_read_u32_index(node,
"syscon-phy-power", 1,
&phy->power_reg)) {
dev_err(&pdev->dev,
"couldn't get power reg. offset\n");
return -EINVAL;
}
}
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
PTR_ERR(phy->wkupclk));
phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
if (IS_ERR(phy->wkupclk)) {
if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
return PTR_ERR(phy->wkupclk);
} else {
dev_warn(&pdev->dev,
"found usb_phy_cm_clk32k, please fix DTS\n");
}
}
phy->optclk = devm_clk_get(phy->dev, "refclk");
if (IS_ERR(phy->optclk)) {
if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
if (IS_ERR(phy->optclk)) {
if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
dev_dbg(&pdev->dev,
"unable to get usb_otg_ss_refclk960m\n");
}
} else {
dev_warn(&pdev->dev,
"found usb_otg_ss_refclk960m, please fix DTS\n");
}
}
otg->set_host = omap_usb_set_host;
otg->set_peripheral = omap_usb_set_peripheral;
if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
otg->set_vbus = omap_usb_set_vbus;
if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
otg->start_srp = omap_usb_start_srp;
otg->usb_phy = &phy->phy;
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
if (IS_ERR(generic_phy)) {
pm_runtime_disable(phy->dev);
return PTR_ERR(generic_phy);
}
phy_set_drvdata(generic_phy, phy);
omap_usb_power_off(generic_phy);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
pm_runtime_disable(phy->dev);
return PTR_ERR(phy_provider);
}
usb_add_phy_dev(&phy->phy);
return 0;
}
static int omap_usb2_remove(struct platform_device *pdev)
{
struct omap_usb *phy = platform_get_drvdata(pdev);
usb_remove_phy(&phy->phy);
pm_runtime_disable(phy->dev);
return 0;
}
static struct platform_driver omap_usb2_driver = {
.probe = omap_usb2_probe,
.remove = omap_usb2_remove,
.driver = {
.name = "omap-usb2",
.of_match_table = omap_usb2_id_table,
},
};
module_platform_driver(omap_usb2_driver);
MODULE_ALIAS("platform:omap_usb2");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("OMAP USB2 phy driver");
MODULE_LICENSE("GPL v2");