| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* Signal support for 32-bit kernel builds | |
| * | |
| * Copyright (C) 2001 Matthew Wilcox <willy at parisc-linux.org> | |
| * Copyright (C) 2006 Kyle McMartin <kyle at parisc-linux.org> | |
| * | |
| * Code was mostly borrowed from kernel/signal.c. | |
| * See kernel/signal.c for additional Copyrights. | |
| */ | |
| #include <linux/compat.h> | |
| #include <linux/module.h> | |
| #include <linux/unistd.h> | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/uaccess.h> | |
| #include "signal32.h" | |
| #define DEBUG_COMPAT_SIG 0 | |
| #define DEBUG_COMPAT_SIG_LEVEL 2 | |
| #if DEBUG_COMPAT_SIG | |
| #define DBG(LEVEL, ...) \ | |
| ((DEBUG_COMPAT_SIG_LEVEL >= LEVEL) \ | |
| ? printk(__VA_ARGS__) : (void) 0) | |
| #else | |
| #define DBG(LEVEL, ...) | |
| #endif | |
| long | |
| restore_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __user * rf, | |
| struct pt_regs *regs) | |
| { | |
| long err = 0; | |
| compat_uint_t compat_reg; | |
| compat_uint_t compat_regt; | |
| int regn; | |
| /* When loading 32-bit values into 64-bit registers make | |
| sure to clear the upper 32-bits */ | |
| DBG(2,"restore_sigcontext32: PER_LINUX32 process\n"); | |
| DBG(2,"restore_sigcontext32: sc = 0x%p, rf = 0x%p, regs = 0x%p\n", sc, rf, regs); | |
| DBG(2,"restore_sigcontext32: compat_sigcontext is %#lx bytes\n", sizeof(*sc)); | |
| for(regn=0; regn < 32; regn++){ | |
| err |= __get_user(compat_reg,&sc->sc_gr[regn]); | |
| regs->gr[regn] = compat_reg; | |
| /* Load upper half */ | |
| err |= __get_user(compat_regt,&rf->rf_gr[regn]); | |
| regs->gr[regn] = ((u64)compat_regt << 32) | (u64)compat_reg; | |
| DBG(3,"restore_sigcontext32: gr%02d = %#lx (%#x / %#x)\n", | |
| regn, regs->gr[regn], compat_regt, compat_reg); | |
| } | |
| DBG(2,"restore_sigcontext32: sc->sc_fr = 0x%p (%#lx)\n",sc->sc_fr, sizeof(sc->sc_fr)); | |
| /* XXX: BE WARNED FR's are 64-BIT! */ | |
| err |= __copy_from_user(regs->fr, sc->sc_fr, sizeof(regs->fr)); | |
| /* Better safe than sorry, pass __get_user two things of | |
| the same size and let gcc do the upward conversion to | |
| 64-bits */ | |
| err |= __get_user(compat_reg, &sc->sc_iaoq[0]); | |
| /* Load upper half */ | |
| err |= __get_user(compat_regt, &rf->rf_iaoq[0]); | |
| regs->iaoq[0] = ((u64)compat_regt << 32) | (u64)compat_reg; | |
| DBG(2,"restore_sigcontext32: upper half of iaoq[0] = %#lx\n", compat_regt); | |
| DBG(2,"restore_sigcontext32: sc->sc_iaoq[0] = %p => %#x\n", | |
| &sc->sc_iaoq[0], compat_reg); | |
| err |= __get_user(compat_reg, &sc->sc_iaoq[1]); | |
| /* Load upper half */ | |
| err |= __get_user(compat_regt, &rf->rf_iaoq[1]); | |
| regs->iaoq[1] = ((u64)compat_regt << 32) | (u64)compat_reg; | |
| DBG(2,"restore_sigcontext32: upper half of iaoq[1] = %#lx\n", compat_regt); | |
| DBG(2,"restore_sigcontext32: sc->sc_iaoq[1] = %p => %#x\n", | |
| &sc->sc_iaoq[1],compat_reg); | |
| DBG(2,"restore_sigcontext32: iaoq is %#lx / %#lx\n", | |
| regs->iaoq[0],regs->iaoq[1]); | |
| err |= __get_user(compat_reg, &sc->sc_iasq[0]); | |
| /* Load the upper half for iasq */ | |
| err |= __get_user(compat_regt, &rf->rf_iasq[0]); | |
| regs->iasq[0] = ((u64)compat_regt << 32) | (u64)compat_reg; | |
| DBG(2,"restore_sigcontext32: upper half of iasq[0] = %#lx\n", compat_regt); | |
| err |= __get_user(compat_reg, &sc->sc_iasq[1]); | |
| /* Load the upper half for iasq */ | |
| err |= __get_user(compat_regt, &rf->rf_iasq[1]); | |
| regs->iasq[1] = ((u64)compat_regt << 32) | (u64)compat_reg; | |
| DBG(2,"restore_sigcontext32: upper half of iasq[1] = %#lx\n", compat_regt); | |
| DBG(2,"restore_sigcontext32: iasq is %#lx / %#lx\n", | |
| regs->iasq[0],regs->iasq[1]); | |
| err |= __get_user(compat_reg, &sc->sc_sar); | |
| /* Load the upper half for sar */ | |
| err |= __get_user(compat_regt, &rf->rf_sar); | |
| regs->sar = ((u64)compat_regt << 32) | (u64)compat_reg; | |
| DBG(2,"restore_sigcontext32: upper_half & sar = %#lx\n", compat_regt); | |
| DBG(2,"restore_sigcontext32: sar is %#lx\n", regs->sar); | |
| DBG(2,"restore_sigcontext32: r28 is %ld\n", regs->gr[28]); | |
| return err; | |
| } | |
| /* | |
| * Set up the sigcontext structure for this process. | |
| * This is not an easy task if the kernel is 64-bit, it will require | |
| * that we examine the process personality to determine if we need to | |
| * truncate for a 32-bit userspace. | |
| */ | |
| long | |
| setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __user * rf, | |
| struct pt_regs *regs, int in_syscall) | |
| { | |
| compat_int_t flags = 0; | |
| long err = 0; | |
| compat_uint_t compat_reg; | |
| compat_uint_t compat_regb; | |
| int regn; | |
| if (on_sig_stack((unsigned long) sc)) | |
| flags |= PARISC_SC_FLAG_ONSTACK; | |
| if (in_syscall) { | |
| DBG(1,"setup_sigcontext32: in_syscall\n"); | |
| flags |= PARISC_SC_FLAG_IN_SYSCALL; | |
| /* Truncate gr31 */ | |
| compat_reg = (compat_uint_t)(regs->gr[31]); | |
| /* regs->iaoq is undefined in the syscall return path */ | |
| err |= __put_user(compat_reg, &sc->sc_iaoq[0]); | |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[0] = %p <= %#x\n", | |
| &sc->sc_iaoq[0], compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->gr[31] >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iaoq[0]); | |
| DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); | |
| compat_reg = (compat_uint_t)(regs->gr[31]+4); | |
| err |= __put_user(compat_reg, &sc->sc_iaoq[1]); | |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", | |
| &sc->sc_iaoq[1], compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iaoq[1]); | |
| DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); | |
| /* Truncate sr3 */ | |
| compat_reg = (compat_uint_t)(regs->sr[3]); | |
| err |= __put_user(compat_reg, &sc->sc_iasq[0]); | |
| err |= __put_user(compat_reg, &sc->sc_iasq[1]); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->sr[3] >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iasq[0]); | |
| err |= __put_user(compat_reg, &rf->rf_iasq[1]); | |
| DBG(2,"setup_sigcontext32: upper half iasq[0] = %#x\n", compat_reg); | |
| DBG(2,"setup_sigcontext32: upper half iasq[1] = %#x\n", compat_reg); | |
| DBG(1,"setup_sigcontext32: iaoq %#lx / %#lx\n", | |
| regs->gr[31], regs->gr[31]+4); | |
| } else { | |
| compat_reg = (compat_uint_t)(regs->iaoq[0]); | |
| err |= __put_user(compat_reg, &sc->sc_iaoq[0]); | |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[0] = %p <= %#x\n", | |
| &sc->sc_iaoq[0], compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->iaoq[0] >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iaoq[0]); | |
| DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); | |
| compat_reg = (compat_uint_t)(regs->iaoq[1]); | |
| err |= __put_user(compat_reg, &sc->sc_iaoq[1]); | |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", | |
| &sc->sc_iaoq[1], compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->iaoq[1] >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iaoq[1]); | |
| DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); | |
| compat_reg = (compat_uint_t)(regs->iasq[0]); | |
| err |= __put_user(compat_reg, &sc->sc_iasq[0]); | |
| DBG(2,"setup_sigcontext32: sc->sc_iasq[0] = %p <= %#x\n", | |
| &sc->sc_iasq[0], compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->iasq[0] >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iasq[0]); | |
| DBG(2,"setup_sigcontext32: upper half iasq[0] = %#x\n", compat_reg); | |
| compat_reg = (compat_uint_t)(regs->iasq[1]); | |
| err |= __put_user(compat_reg, &sc->sc_iasq[1]); | |
| DBG(2,"setup_sigcontext32: sc->sc_iasq[1] = %p <= %#x\n", | |
| &sc->sc_iasq[1], compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->iasq[1] >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_iasq[1]); | |
| DBG(2,"setup_sigcontext32: upper half iasq[1] = %#x\n", compat_reg); | |
| /* Print out the IAOQ for debugging */ | |
| DBG(1,"setup_sigcontext32: ia0q %#lx / %#lx\n", | |
| regs->iaoq[0], regs->iaoq[1]); | |
| } | |
| err |= __put_user(flags, &sc->sc_flags); | |
| DBG(1,"setup_sigcontext32: Truncating general registers.\n"); | |
| for(regn=0; regn < 32; regn++){ | |
| /* Truncate a general register */ | |
| compat_reg = (compat_uint_t)(regs->gr[regn]); | |
| err |= __put_user(compat_reg, &sc->sc_gr[regn]); | |
| /* Store upper half */ | |
| compat_regb = (compat_uint_t)(regs->gr[regn] >> 32); | |
| err |= __put_user(compat_regb, &rf->rf_gr[regn]); | |
| /* DEBUG: Write out the "upper / lower" register data */ | |
| DBG(2,"setup_sigcontext32: gr%02d = %#x / %#x\n", regn, | |
| compat_regb, compat_reg); | |
| } | |
| /* Copy the floating point registers (same size) | |
| XXX: BE WARNED FR's are 64-BIT! */ | |
| DBG(1,"setup_sigcontext32: Copying from regs to sc, " | |
| "sc->sc_fr size = %#lx, regs->fr size = %#lx\n", | |
| sizeof(regs->fr), sizeof(sc->sc_fr)); | |
| err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr)); | |
| compat_reg = (compat_uint_t)(regs->sar); | |
| err |= __put_user(compat_reg, &sc->sc_sar); | |
| DBG(2,"setup_sigcontext32: sar is %#x\n", compat_reg); | |
| /* Store upper half */ | |
| compat_reg = (compat_uint_t)(regs->sar >> 32); | |
| err |= __put_user(compat_reg, &rf->rf_sar); | |
| DBG(2,"setup_sigcontext32: upper half sar = %#x\n", compat_reg); | |
| DBG(1,"setup_sigcontext32: r28 is %ld\n", regs->gr[28]); | |
| return err; | |
| } |