| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2019 NVIDIA CORPORATION. All rights reserved. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/debugfs.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| |
| #include <soc/tegra/bpmp.h> |
| |
| struct tegra186_emc_dvfs { |
| unsigned long latency; |
| unsigned long rate; |
| }; |
| |
| struct tegra186_emc { |
| struct tegra_bpmp *bpmp; |
| struct device *dev; |
| struct clk *clk; |
| |
| struct tegra186_emc_dvfs *dvfs; |
| unsigned int num_dvfs; |
| |
| struct { |
| struct dentry *root; |
| unsigned long min_rate; |
| unsigned long max_rate; |
| } debugfs; |
| }; |
| |
| /* |
| * debugfs interface |
| * |
| * The memory controller driver exposes some files in debugfs that can be used |
| * to control the EMC frequency. The top-level directory can be found here: |
| * |
| * /sys/kernel/debug/emc |
| * |
| * It contains the following files: |
| * |
| * - available_rates: This file contains a list of valid, space-separated |
| * EMC frequencies. |
| * |
| * - min_rate: Writing a value to this file sets the given frequency as the |
| * floor of the permitted range. If this is higher than the currently |
| * configured EMC frequency, this will cause the frequency to be |
| * increased so that it stays within the valid range. |
| * |
| * - max_rate: Similarily to the min_rate file, writing a value to this file |
| * sets the given frequency as the ceiling of the permitted range. If |
| * the value is lower than the currently configured EMC frequency, this |
| * will cause the frequency to be decreased so that it stays within the |
| * valid range. |
| */ |
| |
| static bool tegra186_emc_validate_rate(struct tegra186_emc *emc, |
| unsigned long rate) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < emc->num_dvfs; i++) |
| if (rate == emc->dvfs[i].rate) |
| return true; |
| |
| return false; |
| } |
| |
| static int tegra186_emc_debug_available_rates_show(struct seq_file *s, |
| void *data) |
| { |
| struct tegra186_emc *emc = s->private; |
| const char *prefix = ""; |
| unsigned int i; |
| |
| for (i = 0; i < emc->num_dvfs; i++) { |
| seq_printf(s, "%s%lu", prefix, emc->dvfs[i].rate); |
| prefix = " "; |
| } |
| |
| seq_puts(s, "\n"); |
| |
| return 0; |
| } |
| |
| static int tegra186_emc_debug_available_rates_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, tegra186_emc_debug_available_rates_show, |
| inode->i_private); |
| } |
| |
| static const struct file_operations tegra186_emc_debug_available_rates_fops = { |
| .open = tegra186_emc_debug_available_rates_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int tegra186_emc_debug_min_rate_get(void *data, u64 *rate) |
| { |
| struct tegra186_emc *emc = data; |
| |
| *rate = emc->debugfs.min_rate; |
| |
| return 0; |
| } |
| |
| static int tegra186_emc_debug_min_rate_set(void *data, u64 rate) |
| { |
| struct tegra186_emc *emc = data; |
| int err; |
| |
| if (!tegra186_emc_validate_rate(emc, rate)) |
| return -EINVAL; |
| |
| err = clk_set_min_rate(emc->clk, rate); |
| if (err < 0) |
| return err; |
| |
| emc->debugfs.min_rate = rate; |
| |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(tegra186_emc_debug_min_rate_fops, |
| tegra186_emc_debug_min_rate_get, |
| tegra186_emc_debug_min_rate_set, "%llu\n"); |
| |
| static int tegra186_emc_debug_max_rate_get(void *data, u64 *rate) |
| { |
| struct tegra186_emc *emc = data; |
| |
| *rate = emc->debugfs.max_rate; |
| |
| return 0; |
| } |
| |
| static int tegra186_emc_debug_max_rate_set(void *data, u64 rate) |
| { |
| struct tegra186_emc *emc = data; |
| int err; |
| |
| if (!tegra186_emc_validate_rate(emc, rate)) |
| return -EINVAL; |
| |
| err = clk_set_max_rate(emc->clk, rate); |
| if (err < 0) |
| return err; |
| |
| emc->debugfs.max_rate = rate; |
| |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(tegra186_emc_debug_max_rate_fops, |
| tegra186_emc_debug_max_rate_get, |
| tegra186_emc_debug_max_rate_set, "%llu\n"); |
| |
| static int tegra186_emc_probe(struct platform_device *pdev) |
| { |
| struct mrq_emc_dvfs_latency_response response; |
| struct tegra_bpmp_message msg; |
| struct tegra186_emc *emc; |
| unsigned int i; |
| int err; |
| |
| emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL); |
| if (!emc) |
| return -ENOMEM; |
| |
| emc->bpmp = tegra_bpmp_get(&pdev->dev); |
| if (IS_ERR(emc->bpmp)) { |
| err = PTR_ERR(emc->bpmp); |
| |
| if (err != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "failed to get BPMP: %d\n", err); |
| |
| return err; |
| } |
| |
| emc->clk = devm_clk_get(&pdev->dev, "emc"); |
| if (IS_ERR(emc->clk)) { |
| err = PTR_ERR(emc->clk); |
| dev_err(&pdev->dev, "failed to get EMC clock: %d\n", err); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, emc); |
| emc->dev = &pdev->dev; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.mrq = MRQ_EMC_DVFS_LATENCY; |
| msg.tx.data = NULL; |
| msg.tx.size = 0; |
| msg.rx.data = &response; |
| msg.rx.size = sizeof(response); |
| |
| err = tegra_bpmp_transfer(emc->bpmp, &msg); |
| if (err < 0) { |
| dev_err(&pdev->dev, "failed to EMC DVFS pairs: %d\n", err); |
| return err; |
| } |
| |
| emc->debugfs.min_rate = ULONG_MAX; |
| emc->debugfs.max_rate = 0; |
| |
| emc->num_dvfs = response.num_pairs; |
| |
| emc->dvfs = devm_kmalloc_array(&pdev->dev, emc->num_dvfs, |
| sizeof(*emc->dvfs), GFP_KERNEL); |
| if (!emc->dvfs) |
| return -ENOMEM; |
| |
| dev_dbg(&pdev->dev, "%u DVFS pairs:\n", emc->num_dvfs); |
| |
| for (i = 0; i < emc->num_dvfs; i++) { |
| emc->dvfs[i].rate = response.pairs[i].freq * 1000; |
| emc->dvfs[i].latency = response.pairs[i].latency; |
| |
| if (emc->dvfs[i].rate < emc->debugfs.min_rate) |
| emc->debugfs.min_rate = emc->dvfs[i].rate; |
| |
| if (emc->dvfs[i].rate > emc->debugfs.max_rate) |
| emc->debugfs.max_rate = emc->dvfs[i].rate; |
| |
| dev_dbg(&pdev->dev, " %2u: %lu Hz -> %lu us\n", i, |
| emc->dvfs[i].rate, emc->dvfs[i].latency); |
| } |
| |
| err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate, |
| emc->debugfs.max_rate); |
| if (err < 0) { |
| dev_err(&pdev->dev, |
| "failed to set rate range [%lu-%lu] for %pC\n", |
| emc->debugfs.min_rate, emc->debugfs.max_rate, |
| emc->clk); |
| return err; |
| } |
| |
| emc->debugfs.root = debugfs_create_dir("emc", NULL); |
| if (!emc->debugfs.root) { |
| dev_err(&pdev->dev, "failed to create debugfs directory\n"); |
| return 0; |
| } |
| |
| debugfs_create_file("available_rates", S_IRUGO, emc->debugfs.root, |
| emc, &tegra186_emc_debug_available_rates_fops); |
| debugfs_create_file("min_rate", S_IRUGO | S_IWUSR, emc->debugfs.root, |
| emc, &tegra186_emc_debug_min_rate_fops); |
| debugfs_create_file("max_rate", S_IRUGO | S_IWUSR, emc->debugfs.root, |
| emc, &tegra186_emc_debug_max_rate_fops); |
| |
| return 0; |
| } |
| |
| static int tegra186_emc_remove(struct platform_device *pdev) |
| { |
| struct tegra186_emc *emc = platform_get_drvdata(pdev); |
| |
| debugfs_remove_recursive(emc->debugfs.root); |
| tegra_bpmp_put(emc->bpmp); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id tegra186_emc_of_match[] = { |
| #if defined(CONFIG_ARCH_TEGRA186_SOC) |
| { .compatible = "nvidia,tegra186-emc" }, |
| #endif |
| #if defined(CONFIG_ARCH_TEGRA194_SOC) |
| { .compatible = "nvidia,tegra194-emc" }, |
| #endif |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, tegra186_emc_of_match); |
| |
| static struct platform_driver tegra186_emc_driver = { |
| .driver = { |
| .name = "tegra186-emc", |
| .of_match_table = tegra186_emc_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = tegra186_emc_probe, |
| .remove = tegra186_emc_remove, |
| }; |
| module_platform_driver(tegra186_emc_driver); |
| |
| MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>"); |
| MODULE_DESCRIPTION("NVIDIA Tegra186 External Memory Controller driver"); |
| MODULE_LICENSE("GPL v2"); |