|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * f_serial.c - generic USB serial function driver | 
|  | * | 
|  | * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) | 
|  | * Copyright (C) 2008 by David Brownell | 
|  | * Copyright (C) 2008 by Nokia Corporation | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  |  | 
|  | #include "u_serial.h" | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This function packages a simple "generic serial" port with no real | 
|  | * control mechanisms, just raw data transfer over two bulk endpoints. | 
|  | * | 
|  | * Because it's not standardized, this isn't as interoperable as the | 
|  | * CDC ACM driver.  However, for many purposes it's just as functional | 
|  | * if you can arrange appropriate host side drivers. | 
|  | */ | 
|  |  | 
|  | struct f_gser { | 
|  | struct gserial			port; | 
|  | u8				data_id; | 
|  | u8				port_num; | 
|  | }; | 
|  |  | 
|  | static inline struct f_gser *func_to_gser(struct usb_function *f) | 
|  | { | 
|  | return container_of(f, struct f_gser, port.func); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* interface descriptor: */ | 
|  |  | 
|  | static struct usb_interface_descriptor gser_interface_desc = { | 
|  | .bLength =		USB_DT_INTERFACE_SIZE, | 
|  | .bDescriptorType =	USB_DT_INTERFACE, | 
|  | /* .bInterfaceNumber = DYNAMIC */ | 
|  | .bNumEndpoints =	2, | 
|  | .bInterfaceClass =	USB_CLASS_VENDOR_SPEC, | 
|  | .bInterfaceSubClass =	0, | 
|  | .bInterfaceProtocol =	0, | 
|  | /* .iInterface = DYNAMIC */ | 
|  | }; | 
|  |  | 
|  | /* full speed support: */ | 
|  |  | 
|  | static struct usb_endpoint_descriptor gser_fs_in_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  | .bEndpointAddress =	USB_DIR_IN, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor gser_fs_out_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  | .bEndpointAddress =	USB_DIR_OUT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | }; | 
|  |  | 
|  | static struct usb_descriptor_header *gser_fs_function[] = { | 
|  | (struct usb_descriptor_header *) &gser_interface_desc, | 
|  | (struct usb_descriptor_header *) &gser_fs_in_desc, | 
|  | (struct usb_descriptor_header *) &gser_fs_out_desc, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* high speed support: */ | 
|  |  | 
|  | static struct usb_endpoint_descriptor gser_hs_in_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(512), | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor gser_hs_out_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(512), | 
|  | }; | 
|  |  | 
|  | static struct usb_descriptor_header *gser_hs_function[] = { | 
|  | (struct usb_descriptor_header *) &gser_interface_desc, | 
|  | (struct usb_descriptor_header *) &gser_hs_in_desc, | 
|  | (struct usb_descriptor_header *) &gser_hs_out_desc, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor gser_ss_in_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(1024), | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor gser_ss_out_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(1024), | 
|  | }; | 
|  |  | 
|  | static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = { | 
|  | .bLength =              sizeof gser_ss_bulk_comp_desc, | 
|  | .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP, | 
|  | }; | 
|  |  | 
|  | static struct usb_descriptor_header *gser_ss_function[] = { | 
|  | (struct usb_descriptor_header *) &gser_interface_desc, | 
|  | (struct usb_descriptor_header *) &gser_ss_in_desc, | 
|  | (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, | 
|  | (struct usb_descriptor_header *) &gser_ss_out_desc, | 
|  | (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* string descriptors: */ | 
|  |  | 
|  | static struct usb_string gser_string_defs[] = { | 
|  | [0].s = "Generic Serial", | 
|  | {  } /* end of list */ | 
|  | }; | 
|  |  | 
|  | static struct usb_gadget_strings gser_string_table = { | 
|  | .language =		0x0409,	/* en-us */ | 
|  | .strings =		gser_string_defs, | 
|  | }; | 
|  |  | 
|  | static struct usb_gadget_strings *gser_strings[] = { | 
|  | &gser_string_table, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt) | 
|  | { | 
|  | struct f_gser		*gser = func_to_gser(f); | 
|  | struct usb_composite_dev *cdev = f->config->cdev; | 
|  |  | 
|  | /* we know alt == 0, so this is an activation or a reset */ | 
|  |  | 
|  | if (gser->port.in->enabled) { | 
|  | dev_dbg(&cdev->gadget->dev, | 
|  | "reset generic ttyGS%d\n", gser->port_num); | 
|  | gserial_disconnect(&gser->port); | 
|  | } | 
|  | if (!gser->port.in->desc || !gser->port.out->desc) { | 
|  | dev_dbg(&cdev->gadget->dev, | 
|  | "activate generic ttyGS%d\n", gser->port_num); | 
|  | if (config_ep_by_speed(cdev->gadget, f, gser->port.in) || | 
|  | config_ep_by_speed(cdev->gadget, f, gser->port.out)) { | 
|  | gser->port.in->desc = NULL; | 
|  | gser->port.out->desc = NULL; | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  | gserial_connect(&gser->port, gser->port_num); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void gser_disable(struct usb_function *f) | 
|  | { | 
|  | struct f_gser	*gser = func_to_gser(f); | 
|  | struct usb_composite_dev *cdev = f->config->cdev; | 
|  |  | 
|  | dev_dbg(&cdev->gadget->dev, | 
|  | "generic ttyGS%d deactivated\n", gser->port_num); | 
|  | gserial_disconnect(&gser->port); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* serial function driver setup/binding */ | 
|  |  | 
|  | static int gser_bind(struct usb_configuration *c, struct usb_function *f) | 
|  | { | 
|  | struct usb_composite_dev *cdev = c->cdev; | 
|  | struct f_gser		*gser = func_to_gser(f); | 
|  | int			status; | 
|  | struct usb_ep		*ep; | 
|  |  | 
|  | /* REVISIT might want instance-specific strings to help | 
|  | * distinguish instances ... | 
|  | */ | 
|  |  | 
|  | /* maybe allocate device-global string ID */ | 
|  | if (gser_string_defs[0].id == 0) { | 
|  | status = usb_string_id(c->cdev); | 
|  | if (status < 0) | 
|  | return status; | 
|  | gser_string_defs[0].id = status; | 
|  | } | 
|  |  | 
|  | /* allocate instance-specific interface IDs */ | 
|  | status = usb_interface_id(c, f); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  | gser->data_id = status; | 
|  | gser_interface_desc.bInterfaceNumber = status; | 
|  |  | 
|  | status = -ENODEV; | 
|  |  | 
|  | /* allocate instance-specific endpoints */ | 
|  | ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc); | 
|  | if (!ep) | 
|  | goto fail; | 
|  | gser->port.in = ep; | 
|  |  | 
|  | ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc); | 
|  | if (!ep) | 
|  | goto fail; | 
|  | gser->port.out = ep; | 
|  |  | 
|  | /* support all relevant hardware speeds... we expect that when | 
|  | * hardware is dual speed, all bulk-capable endpoints work at | 
|  | * both speeds | 
|  | */ | 
|  | gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; | 
|  | gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; | 
|  |  | 
|  | gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; | 
|  | gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; | 
|  |  | 
|  | status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function, | 
|  | gser_ss_function, NULL); | 
|  | if (status) | 
|  | goto fail; | 
|  | dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n", | 
|  | gser->port_num, | 
|  | gadget_is_superspeed(c->cdev->gadget) ? "super" : | 
|  | gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", | 
|  | gser->port.in->name, gser->port.out->name); | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item) | 
|  | { | 
|  | return container_of(to_config_group(item), struct f_serial_opts, | 
|  | func_inst.group); | 
|  | } | 
|  |  | 
|  | static void serial_attr_release(struct config_item *item) | 
|  | { | 
|  | struct f_serial_opts *opts = to_f_serial_opts(item); | 
|  |  | 
|  | usb_put_function_instance(&opts->func_inst); | 
|  | } | 
|  |  | 
|  | static struct configfs_item_operations serial_item_ops = { | 
|  | .release	= serial_attr_release, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_U_SERIAL_CONSOLE | 
|  |  | 
|  | static ssize_t f_serial_console_store(struct config_item *item, | 
|  | const char *page, size_t count) | 
|  | { | 
|  | return gserial_set_console(to_f_serial_opts(item)->port_num, | 
|  | page, count); | 
|  | } | 
|  |  | 
|  | static ssize_t f_serial_console_show(struct config_item *item, char *page) | 
|  | { | 
|  | return gserial_get_console(to_f_serial_opts(item)->port_num, page); | 
|  | } | 
|  |  | 
|  | CONFIGFS_ATTR(f_serial_, console); | 
|  |  | 
|  | #endif /* CONFIG_U_SERIAL_CONSOLE */ | 
|  |  | 
|  | static ssize_t f_serial_port_num_show(struct config_item *item, char *page) | 
|  | { | 
|  | return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num); | 
|  | } | 
|  |  | 
|  | CONFIGFS_ATTR_RO(f_serial_, port_num); | 
|  |  | 
|  | static struct configfs_attribute *acm_attrs[] = { | 
|  | #ifdef CONFIG_U_SERIAL_CONSOLE | 
|  | &f_serial_attr_console, | 
|  | #endif | 
|  | &f_serial_attr_port_num, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static const struct config_item_type serial_func_type = { | 
|  | .ct_item_ops	= &serial_item_ops, | 
|  | .ct_attrs	= acm_attrs, | 
|  | .ct_owner	= THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | static void gser_free_inst(struct usb_function_instance *f) | 
|  | { | 
|  | struct f_serial_opts *opts; | 
|  |  | 
|  | opts = container_of(f, struct f_serial_opts, func_inst); | 
|  | gserial_free_line(opts->port_num); | 
|  | kfree(opts); | 
|  | } | 
|  |  | 
|  | static struct usb_function_instance *gser_alloc_inst(void) | 
|  | { | 
|  | struct f_serial_opts *opts; | 
|  | int ret; | 
|  |  | 
|  | opts = kzalloc(sizeof(*opts), GFP_KERNEL); | 
|  | if (!opts) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | opts->func_inst.free_func_inst = gser_free_inst; | 
|  | ret = gserial_alloc_line(&opts->port_num); | 
|  | if (ret) { | 
|  | kfree(opts); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  | config_group_init_type_name(&opts->func_inst.group, "", | 
|  | &serial_func_type); | 
|  |  | 
|  | return &opts->func_inst; | 
|  | } | 
|  |  | 
|  | static void gser_free(struct usb_function *f) | 
|  | { | 
|  | struct f_gser *serial; | 
|  |  | 
|  | serial = func_to_gser(f); | 
|  | kfree(serial); | 
|  | } | 
|  |  | 
|  | static void gser_unbind(struct usb_configuration *c, struct usb_function *f) | 
|  | { | 
|  | usb_free_all_descriptors(f); | 
|  | } | 
|  |  | 
|  | static void gser_resume(struct usb_function *f) | 
|  | { | 
|  | struct f_gser *gser = func_to_gser(f); | 
|  |  | 
|  | gserial_resume(&gser->port); | 
|  | } | 
|  |  | 
|  | static void gser_suspend(struct usb_function *f) | 
|  | { | 
|  | struct f_gser *gser = func_to_gser(f); | 
|  |  | 
|  | gserial_suspend(&gser->port); | 
|  | } | 
|  |  | 
|  | static struct usb_function *gser_alloc(struct usb_function_instance *fi) | 
|  | { | 
|  | struct f_gser	*gser; | 
|  | struct f_serial_opts *opts; | 
|  |  | 
|  | /* allocate and initialize one new instance */ | 
|  | gser = kzalloc(sizeof(*gser), GFP_KERNEL); | 
|  | if (!gser) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | opts = container_of(fi, struct f_serial_opts, func_inst); | 
|  |  | 
|  | gser->port_num = opts->port_num; | 
|  |  | 
|  | gser->port.func.name = "gser"; | 
|  | gser->port.func.strings = gser_strings; | 
|  | gser->port.func.bind = gser_bind; | 
|  | gser->port.func.unbind = gser_unbind; | 
|  | gser->port.func.set_alt = gser_set_alt; | 
|  | gser->port.func.disable = gser_disable; | 
|  | gser->port.func.free_func = gser_free; | 
|  | gser->port.func.resume = gser_resume; | 
|  | gser->port.func.suspend = gser_suspend; | 
|  |  | 
|  | return &gser->port.func; | 
|  | } | 
|  |  | 
|  | DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Al Borchers"); | 
|  | MODULE_AUTHOR("David Brownell"); |