| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| * Copyright 2017-2018 NXP. |
| * |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "imx6sll.dtsi" |
| |
| / { |
| model = "Freescale i.MX6SLL EVK Board"; |
| compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x80000000>; |
| }; |
| |
| backlight_display: backlight-display { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| status = "okay"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led>; |
| |
| user { |
| label = "debug"; |
| gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| reg_usb_otg1_vbus: regulator-otg1-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1_vbus>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator-otg2-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg2_vbus>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_aud3v: regulator-aud3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "wm8962-supply-3v15"; |
| regulator-min-microvolt = <3150000>; |
| regulator-max-microvolt = <3150000>; |
| regulator-boot-on; |
| }; |
| |
| reg_aud4v: regulator-aud4v { |
| compatible = "regulator-fixed"; |
| regulator-name = "wm8962-supply-4v2"; |
| regulator-min-microvolt = <4325000>; |
| regulator-max-microvolt = <4325000>; |
| regulator-boot-on; |
| }; |
| |
| reg_lcd_3v3: regulator-lcd-3v3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_lcd_3v3>; |
| regulator-name = "lcd-3v3"; |
| gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_lcd_5v: regulator-lcd-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_sd1_vmmc: regulator-sd1-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; |
| regulator-name = "SD1_SPWR"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_sd3_vmmc: regulator-sd3-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_sd3_vmmc>; |
| regulator-name = "SD3_WIFI"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| panel { |
| compatible = "sii,43wvf1g"; |
| backlight = <&backlight_display>; |
| dvdd-supply = <®_lcd_3v3>; |
| avdd-supply = <®_lcd_5v>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&display_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &cpu0 { |
| arm-supply = <&sw1a_reg>; |
| soc-supply = <&sw1c_reg>; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pfuze100: pmic@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd>; |
| status = "okay"; |
| |
| port { |
| display_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| |
| &pwm1 { |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &snvs_poweroff { |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| keep-power-in-suspend; |
| wakeup-source; |
| vmmc-supply = <®_sd1_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| disable-over-current; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| dr_mode = "host"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; |
| keep-power-in-suspend; |
| wakeup-source; |
| vmmc-supply = <®_sd3_vmmc>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog1>; |
| fsl,ext-reset-output; |
| }; |
| |
| &iomuxc { |
| pinctrl_reg_sd3_vmmc: sd3vmmcgrp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 |
| >; |
| }; |
| |
| pinctrl_usb_otg1_vbus: vbus1grp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 |
| >; |
| }; |
| |
| pinctrl_usb_otg2_vbus: vbus2grp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 |
| >; |
| }; |
| |
| pinctrl_reg_lcd_3v3: reglcd3v3grp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 |
| >; |
| }; |
| |
| pinctrl_reg_sd1_vmmc: sd1vmmcgrp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 |
| MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 |
| MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 |
| MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 |
| MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 |
| MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 |
| MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 |
| MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 |
| MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 |
| MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 |
| MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 |
| MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 |
| MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 |
| MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 |
| MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 |
| MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usbotg1: usbotg1grp { |
| fsl,pins = < |
| MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061 |
| MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1 |
| MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9 |
| MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 |
| MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_lcd: lcdgrp { |
| fsl,pins = < |
| MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 |
| MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 |
| MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 |
| MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 |
| MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 |
| MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 |
| MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 |
| MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 |
| MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 |
| MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 |
| MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 |
| MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 |
| MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 |
| MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 |
| MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 |
| MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 |
| MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 |
| MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 |
| MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 |
| MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 |
| MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 |
| MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 |
| MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 |
| MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 |
| MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 |
| MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 |
| MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 |
| MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 |
| MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 |
| >; |
| }; |
| |
| pinctrl_led: ledgrp { |
| fsl,pins = < |
| MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059 |
| >; |
| }; |
| |
| pinctrl_pwm1: pmw1grp { |
| fsl,pins = < |
| MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 |
| >; |
| }; |
| |
| pinctrl_wdog1: wdog1grp { |
| fsl,pins = < |
| MX6SLL_PAD_WDOG_B__WDOG1_B 0x170b0 |
| >; |
| }; |
| }; |
