| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| // |
| // Copyright 2019 Armadeus Systems <support@armadeus.com> |
| |
| / { |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm3 0 191000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <7>; |
| power-supply = <®_5v>; |
| status = "okay"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| user-button { |
| label = "User button"; |
| gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; |
| linux,code = <BTN_MISC>; |
| wakeup-source; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| user-led { |
| label = "User"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_led>; |
| gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| onewire { |
| compatible = "w1-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_w1>; |
| gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| panel: panel { |
| compatible = "armadeus,st0700-adapt"; |
| power-supply = <®_3v3>; |
| backlight = <&backlight>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&lcdif_out>; |
| }; |
| }; |
| }; |
| |
| reg_5v: regulator-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "5V"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_usbotg1_vbus: regulator-usbotg1vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usbotg1vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1_vbus>; |
| gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usbotg2_vbus: regulator-usbotg2vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usbotg2vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg2_vbus>; |
| gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_3v3>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_5v>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_5v>; |
| status = "okay"; |
| }; |
| |
| &ecspi4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi4>; |
| cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| spidev0: spi@0 { |
| compatible = "spidev"; |
| reg = <0>; |
| spi-max-frequency = <5000000>; |
| }; |
| |
| spidev1: spi@1 { |
| compatible = "spidev"; |
| reg = <1>; |
| spi-max-frequency = <5000000>; |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcdif>; |
| status = "okay"; |
| |
| port { |
| lcdif_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| |
| &pwm3 { |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "disabled"; |
| }; |
| |
| &tsc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tsc>; |
| xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; |
| measure-delay-time = <0xffff>; |
| pre-charge-time = <0xffff>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1_id>; |
| vbus-supply = <®_usbotg1_vbus>; |
| dr_mode = "otg"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usbotg2_vbus>; |
| dr_mode = "host"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpios>; |
| |
| pinctrl_ecspi4: ecspi4grp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 |
| MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 |
| MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 |
| MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 |
| MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 |
| MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 |
| MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_gpios: gpiosgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 |
| MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 |
| MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 |
| MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 |
| MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 |
| MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 |
| MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 |
| MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpiokeysgrp { |
| fsl,pins = < |
| MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 |
| MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 |
| MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 |
| >; |
| }; |
| |
| pinctrl_lcdif: lcdifgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 |
| MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 |
| MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 |
| MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 |
| MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 |
| MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 |
| MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 |
| MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 |
| MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 |
| MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 |
| MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 |
| MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 |
| MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 |
| MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 |
| MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 |
| MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 |
| MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 |
| MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 |
| MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 |
| MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 |
| MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 |
| MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 |
| >; |
| }; |
| |
| pinctrl_led: ledgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_tsc: tscgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 |
| MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 |
| MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 |
| MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg1_id: usbotg1idgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usbotg1_vbus: usbotg1vbusgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 |
| >; |
| }; |
| }; |
