| /* |
| * Device Tree Source for OMAP243x SoC |
| * |
| * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include "omap2.dtsi" |
| |
| / { |
| compatible = "ti,omap2430", "ti,omap2"; |
| |
| ocp { |
| l4_wkup: l4_wkup@49000000 { |
| compatible = "ti,omap2-l4-wkup", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x49000000 0x31000>; |
| |
| prcm: prcm@6000 { |
| compatible = "ti,omap2-prcm"; |
| reg = <0x6000 0x1000>; |
| |
| prcm_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| prcm_clockdomains: clockdomains { |
| }; |
| }; |
| |
| scm: scm@2000 { |
| compatible = "ti,omap2-scm", "simple-bus"; |
| reg = <0x2000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #pinctrl-cells = <1>; |
| ranges = <0 0x2000 0x1000>; |
| |
| omap2430_pmx: pinmux@30 { |
| compatible = "ti,omap2430-padconf", |
| "pinctrl-single"; |
| reg = <0x30 0x0154>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <8>; |
| pinctrl-single,function-mask = <0x3f>; |
| }; |
| |
| scm_conf: scm_conf@270 { |
| compatible = "syscon", |
| "simple-bus"; |
| reg = <0x270 0x240>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x270 0x240>; |
| |
| scm_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| pbias_regulator: pbias_regulator@230 { |
| compatible = "ti,pbias-omap2", "ti,pbias-omap"; |
| reg = <0x230 0x4>; |
| syscon = <&scm_conf>; |
| pbias_mmc_reg: pbias_mmc_omap2430 { |
| regulator-name = "pbias_mmc_omap2430"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| }; |
| }; |
| |
| scm_clockdomains: clockdomains { |
| }; |
| }; |
| |
| target-module@20000 { |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x20000 0x4>, |
| <0x20004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>; |
| clocks = <&func_32k_ck>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000 0x1000>; |
| |
| counter32k: counter@0 { |
| compatible = "ti,omap-counter32k"; |
| reg = <0 0x20>; |
| }; |
| }; |
| }; |
| |
| gpio1: gpio@4900c000 { |
| compatible = "ti,omap2-gpio"; |
| reg = <0x4900c000 0x200>; |
| interrupts = <29>; |
| ti,hwmods = "gpio1"; |
| ti,gpio-always-on; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| gpio2: gpio@4900e000 { |
| compatible = "ti,omap2-gpio"; |
| reg = <0x4900e000 0x200>; |
| interrupts = <30>; |
| ti,hwmods = "gpio2"; |
| ti,gpio-always-on; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| gpio3: gpio@49010000 { |
| compatible = "ti,omap2-gpio"; |
| reg = <0x49010000 0x200>; |
| interrupts = <31>; |
| ti,hwmods = "gpio3"; |
| ti,gpio-always-on; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| gpio4: gpio@49012000 { |
| compatible = "ti,omap2-gpio"; |
| reg = <0x49012000 0x200>; |
| interrupts = <32>; |
| ti,hwmods = "gpio4"; |
| ti,gpio-always-on; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| gpio5: gpio@480b6000 { |
| compatible = "ti,omap2-gpio"; |
| reg = <0x480b6000 0x200>; |
| interrupts = <33>; |
| ti,hwmods = "gpio5"; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| }; |
| |
| gpmc: gpmc@6e000000 { |
| compatible = "ti,omap2430-gpmc"; |
| reg = <0x6e000000 0x1000>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| interrupts = <20>; |
| gpmc,num-cs = <8>; |
| gpmc,num-waitpins = <4>; |
| ti,hwmods = "gpmc"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| mcbsp1: mcbsp@48074000 { |
| compatible = "ti,omap2430-mcbsp"; |
| reg = <0x48074000 0xff>; |
| reg-names = "mpu"; |
| interrupts = <64>, /* OCP compliant interrupt */ |
| <59>, /* TX interrupt */ |
| <60>, /* RX interrupt */ |
| <61>; /* RX overflow interrupt */ |
| interrupt-names = "common", "tx", "rx", "rx_overflow"; |
| ti,buffer-size = <128>; |
| ti,hwmods = "mcbsp1"; |
| dmas = <&sdma 31>, |
| <&sdma 32>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mcbsp2: mcbsp@48076000 { |
| compatible = "ti,omap2430-mcbsp"; |
| reg = <0x48076000 0xff>; |
| reg-names = "mpu"; |
| interrupts = <16>, /* OCP compliant interrupt */ |
| <62>, /* TX interrupt */ |
| <63>; /* RX interrupt */ |
| interrupt-names = "common", "tx", "rx"; |
| ti,buffer-size = <128>; |
| ti,hwmods = "mcbsp2"; |
| dmas = <&sdma 33>, |
| <&sdma 34>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mcbsp3: mcbsp@4808c000 { |
| compatible = "ti,omap2430-mcbsp"; |
| reg = <0x4808c000 0xff>; |
| reg-names = "mpu"; |
| interrupts = <17>, /* OCP compliant interrupt */ |
| <89>, /* TX interrupt */ |
| <90>; /* RX interrupt */ |
| interrupt-names = "common", "tx", "rx"; |
| ti,buffer-size = <128>; |
| ti,hwmods = "mcbsp3"; |
| dmas = <&sdma 17>, |
| <&sdma 18>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mcbsp4: mcbsp@4808e000 { |
| compatible = "ti,omap2430-mcbsp"; |
| reg = <0x4808e000 0xff>; |
| reg-names = "mpu"; |
| interrupts = <18>, /* OCP compliant interrupt */ |
| <54>, /* TX interrupt */ |
| <55>; /* RX interrupt */ |
| interrupt-names = "common", "tx", "rx"; |
| ti,buffer-size = <128>; |
| ti,hwmods = "mcbsp4"; |
| dmas = <&sdma 19>, |
| <&sdma 20>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mcbsp5: mcbsp@48096000 { |
| compatible = "ti,omap2430-mcbsp"; |
| reg = <0x48096000 0xff>; |
| reg-names = "mpu"; |
| interrupts = <19>, /* OCP compliant interrupt */ |
| <81>, /* TX interrupt */ |
| <82>; /* RX interrupt */ |
| interrupt-names = "common", "tx", "rx"; |
| ti,buffer-size = <128>; |
| ti,hwmods = "mcbsp5"; |
| dmas = <&sdma 21>, |
| <&sdma 22>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@4809c000 { |
| compatible = "ti,omap2-hsmmc"; |
| reg = <0x4809c000 0x200>; |
| interrupts = <83>; |
| ti,hwmods = "mmc1"; |
| ti,dual-volt; |
| dmas = <&sdma 61>, <&sdma 62>; |
| dma-names = "tx", "rx"; |
| pbias-supply = <&pbias_mmc_reg>; |
| }; |
| |
| mmc2: mmc@480b4000 { |
| compatible = "ti,omap2-hsmmc"; |
| reg = <0x480b4000 0x200>; |
| interrupts = <86>; |
| ti,hwmods = "mmc2"; |
| dmas = <&sdma 47>, <&sdma 48>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| mailbox: mailbox@48094000 { |
| compatible = "ti,omap2-mailbox"; |
| reg = <0x48094000 0x200>; |
| interrupts = <26>; |
| ti,hwmods = "mailbox"; |
| #mbox-cells = <1>; |
| ti,mbox-num-users = <4>; |
| ti,mbox-num-fifos = <6>; |
| mbox_dsp: dsp { |
| ti,mbox-tx = <0 0 0>; |
| ti,mbox-rx = <1 0 0>; |
| }; |
| }; |
| |
| timer1_target: target-module@49018000 { |
| compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| reg = <0x49018000 0x4>, |
| <0x49018010 0x4>, |
| <0x49018014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| clocks = <&gpt1_fck>, <&gpt1_ick>; |
| clock-names = "fck", "ick"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x49018000 0x1000>; |
| |
| timer1: timer@0 { |
| compatible = "ti,omap2420-timer"; |
| reg = <0 0x400>; |
| interrupts = <37>; |
| ti,timer-alwon; |
| }; |
| }; |
| |
| mcspi3: spi@480b8000 { |
| compatible = "ti,omap2-mcspi"; |
| ti,hwmods = "mcspi3"; |
| reg = <0x480b8000 0x100>; |
| interrupts = <91>; |
| dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>; |
| dma-names = "tx0", "rx0", "tx1", "rx1"; |
| }; |
| |
| usb_otg_hs: usb_otg_hs@480ac000 { |
| compatible = "ti,omap2-musb"; |
| ti,hwmods = "usb_otg_hs"; |
| reg = <0x480ac000 0x1000>; |
| interrupts = <93>; |
| }; |
| |
| wd_timer2: wdt@49016000 { |
| compatible = "ti,omap2-wdt"; |
| ti,hwmods = "wd_timer2"; |
| reg = <0x49016000 0x80>; |
| }; |
| }; |
| }; |
| |
| &sdma { |
| compatible = "ti,omap2430-sdma", "ti,omap-sdma"; |
| }; |
| |
| &i2c1 { |
| compatible = "ti,omap2430-i2c"; |
| }; |
| |
| &i2c2 { |
| compatible = "ti,omap2430-i2c"; |
| }; |
| |
| #include "omap24xx-clocks.dtsi" |
| #include "omap2430-clocks.dtsi" |
| |
| /* Preferred always-on timer for clockevent */ |
| &timer1_target { |
| ti,no-reset-on-init; |
| ti,no-idle; |
| timer@0 { |
| assigned-clocks = <&gpt1_fck>; |
| assigned-clock-parents = <&func_32k_ck>; |
| }; |
| }; |
