blob: 9368ac2cf5082ff99d692c5c79ee1b44f6e7787e [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the Blanche board
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2016 Cogent Embedded, Inc.
*/
/dts-v1/;
#include "r8a7792.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Blanche";
compatible = "renesas,blanche", "renesas,r8a7792";
aliases {
serial0 = &scif0;
serial1 = &scif3;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
d3_3v: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ethernet@18000000 {
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0 0x18000000 0 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqc>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
smsc,irq-push-pull;
reg-io-width = <4>;
vddvario-supply = <&d3_3v>;
vdd33a-supply = <&d3_3v>;
pinctrl-0 = <&lan89218_pins>;
pinctrl-names = "default";
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb1>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
x1_clk: x1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
x2_clk: x2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <65000000>;
};
keyboard {
compatible = "gpio-keys";
key-1 {
linux,code = <KEY_1>;
label = "SW2-1";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
};
key-2 {
linux,code = <KEY_2>;
label = "SW2-2";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
};
key-3 {
linux,code = <KEY_3>;
label = "SW2-3";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
};
key-4 {
linux,code = <KEY_4>;
label = "SW2-4";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
};
key-a {
linux,code = <KEY_A>;
label = "SW24";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
};
key-b {
linux,code = <KEY_B>;
label = "SW25";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led17 {
gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
};
led18 {
gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
};
led19 {
gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
};
led20 {
gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
};
};
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&extal_clk {
clock-frequency = <20000000>;
};
&can_clk {
clock-frequency = <48000000>;
};
&pfc {
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
scif3_pins: scif3 {
groups = "scif3_data";
function = "scif3";
};
lan89218_pins: lan89218 {
intc {
groups = "intc_irq0";
function = "intc";
};
lbsc {
groups = "lbsc_ex_cs0";
function = "lbsc";
};
};
can0_pins: can0 {
groups = "can0_data", "can_clk";
function = "can0";
};
sdhi0_pins: sdhi0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
};
du0_pins: du0 {
groups = "du0_rgb888", "du0_sync", "du0_disp";
function = "du0";
};
du1_pins: du1 {
groups = "du1_rgb666", "du1_sync", "du1_disp";
function = "du1";
};
pmic_irq_pins: pmicirq {
groups = "intc_irq2";
function = "intc";
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif3 {
pinctrl-0 = <&scif3_pins>;
pinctrl-names = "default";
status = "okay";
};
&can0 {
pinctrl-0 = <&can0_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&vcc_sdhi0>;
cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
hdmi@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&irqc>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&du_out_rgb0>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&iic3 {
status = "okay";
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins>;
interrupt-parent = <&irqc>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
rtc {
compatible = "dlg,da9063-rtc";
};
wdt {
compatible = "dlg,da9063-watchdog";
};
};
};
&du {
pinctrl-0 = <&du0_pins &du1_pins>;
pinctrl-names = "default";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
status = "okay";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
};
port@1 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};