| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung's S5PV210 SoC device tree source |
| * |
| * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. |
| * |
| * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> |
| * Tomasz Figa <t.figa@samsung.com> |
| * |
| * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 |
| * based board files can include this file and provide values for board specfic |
| * bindings. |
| * |
| * Note: This file does not include device nodes for all the controllers in |
| * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional |
| * nodes can be added to this file. |
| */ |
| |
| #include <dt-bindings/clock/s5pv210.h> |
| #include <dt-bindings/clock/s5pv210-audss.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| csis0 = &csis0; |
| dmc0 = &dmc0; |
| dmc1 = &dmc1; |
| fimc0 = &fimc0; |
| fimc1 = &fimc1; |
| fimc2 = &fimc2; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2s0 = &i2s0; |
| i2s1 = &i2s1; |
| i2s2 = &i2s2; |
| pinctrl0 = &pinctrl0; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a8"; |
| reg = <0>; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| external-clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| xxti: oscillator@0 { |
| compatible = "fixed-clock"; |
| reg = <0>; |
| clock-frequency = <0>; |
| clock-output-names = "xxti"; |
| #clock-cells = <0>; |
| }; |
| |
| xusbxti: oscillator@1 { |
| compatible = "fixed-clock"; |
| reg = <1>; |
| clock-frequency = <0>; |
| clock-output-names = "xusbxti"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| onenand: onenand@b0600000 { |
| compatible = "samsung,s5pv210-onenand"; |
| reg = <0xb0600000 0x2000>, |
| <0xb0000000 0x20000>, |
| <0xb0040000 0x20000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <31>; |
| clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; |
| clock-names = "bus", "onenand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| chipid@e0000000 { |
| compatible = "samsung,s5pv210-chipid"; |
| reg = <0xe0000000 0x1000>; |
| }; |
| |
| clocks: clock-controller@e0100000 { |
| compatible = "samsung,s5pv210-clock", "simple-bus"; |
| reg = <0xe0100000 0x10000>; |
| clock-names = "xxti", "xusbxti"; |
| clocks = <&xxti>, <&xusbxti>; |
| #clock-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pmu_syscon: syscon@e0108000 { |
| compatible = "samsung-s5pv210-pmu", "syscon"; |
| reg = <0xe0108000 0x8000>; |
| }; |
| }; |
| |
| pinctrl0: pinctrl@e0200000 { |
| compatible = "samsung,s5pv210-pinctrl"; |
| reg = <0xe0200000 0x1000>; |
| interrupt-parent = <&vic0>; |
| interrupts = <30>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,s5pv210-wakeup-eint"; |
| interrupts = <16>; |
| interrupt-parent = <&vic0>; |
| }; |
| }; |
| |
| amba { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| |
| pdma0: dma@e0900000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0xe0900000 0x1000>; |
| interrupt-parent = <&vic0>; |
| interrupts = <19>; |
| clocks = <&clocks CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: dma@e0a00000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0xe0a00000 0x1000>; |
| interrupt-parent = <&vic0>; |
| interrupts = <20>; |
| clocks = <&clocks CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| }; |
| |
| adc: adc@e1700000 { |
| compatible = "samsung,s5pv210-adc"; |
| reg = <0xe1700000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <23>, <24>; |
| clocks = <&clocks CLK_TSADC>; |
| clock-names = "adc"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@e1300000 { |
| compatible = "samsung,s5pv210-spi"; |
| reg = <0xe1300000 0x1000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <15>; |
| dmas = <&pdma0 7>, <&pdma0 6>; |
| dma-names = "tx", "rx"; |
| clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@e1400000 { |
| compatible = "samsung,s5pv210-spi"; |
| reg = <0xe1400000 0x1000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <16>; |
| dmas = <&pdma1 7>, <&pdma1 6>; |
| dma-names = "tx", "rx"; |
| clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| keypad: keypad@e1600000 { |
| compatible = "samsung,s5pv210-keypad"; |
| reg = <0xe1600000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <25>; |
| clocks = <&clocks CLK_KEYIF>; |
| clock-names = "keypad"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@e1800000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0xe1800000 0x1000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <14>; |
| clocks = <&clocks CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@e1a00000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0xe1a00000 0x1000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <19>; |
| clocks = <&clocks CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-0 = <&i2c2_bus>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| audio-subsystem { |
| compatible = "samsung,s5pv210-audss", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clk_audss: clock-controller@eee10000 { |
| compatible = "samsung,s5pv210-audss-clock"; |
| reg = <0xeee10000 0x1000>; |
| clock-names = "hclk", "xxti", |
| "fout_epll", |
| "sclk_audio0"; |
| clocks = <&clocks DOUT_HCLKP>, <&xxti>, |
| <&clocks FOUT_EPLL>, |
| <&clocks SCLK_AUDIO0>; |
| #clock-cells = <1>; |
| }; |
| |
| i2s0: i2s@eee30000 { |
| compatible = "samsung,s5pv210-i2s"; |
| reg = <0xeee30000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <16>; |
| dma-names = "rx", "tx", "tx-sec"; |
| dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; |
| clock-names = "iis", |
| "i2s_opclk0", |
| "i2s_opclk1"; |
| clocks = <&clk_audss CLK_I2S>, |
| <&clk_audss CLK_I2S>, |
| <&clk_audss CLK_DOUT_AUD_BUS>; |
| samsung,idma-addr = <0xc0010000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| i2s1: i2s@e2100000 { |
| compatible = "samsung,s3c6410-i2s"; |
| reg = <0xe2100000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <17>; |
| dma-names = "rx", "tx"; |
| dmas = <&pdma1 12>, <&pdma1 13>; |
| clock-names = "iis", "i2s_opclk0"; |
| clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@e2a00000 { |
| compatible = "samsung,s3c6410-i2s"; |
| reg = <0xe2a00000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <18>; |
| dma-names = "rx", "tx"; |
| dmas = <&pdma1 14>, <&pdma1 15>; |
| clock-names = "iis", "i2s_opclk0"; |
| clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2_bus>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@e2500000 { |
| compatible = "samsung,s5pc100-pwm"; |
| reg = <0xe2500000 0x1000>; |
| interrupt-parent = <&vic0>; |
| interrupts = <21>, <22>, <23>, <24>, <25>; |
| clock-names = "timers"; |
| clocks = <&clocks CLK_PWM>; |
| #pwm-cells = <3>; |
| }; |
| |
| watchdog: watchdog@e2700000 { |
| compatible = "samsung,s3c6410-wdt"; |
| reg = <0xe2700000 0x1000>; |
| interrupt-parent = <&vic0>; |
| interrupts = <26>; |
| clock-names = "watchdog"; |
| clocks = <&clocks CLK_WDT>; |
| }; |
| |
| rtc: rtc@e2800000 { |
| compatible = "samsung,s3c6410-rtc"; |
| reg = <0xe2800000 0x100>; |
| interrupt-parent = <&vic0>; |
| interrupts = <28>, <29>; |
| clocks = <&clocks CLK_RTC>; |
| clock-names = "rtc"; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@e2900000 { |
| compatible = "samsung,s5pv210-uart"; |
| reg = <0xe2900000 0x400>; |
| interrupt-parent = <&vic1>; |
| interrupts = <10>; |
| clock-names = "uart", "clk_uart_baud0", |
| "clk_uart_baud1"; |
| clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, |
| <&clocks SCLK_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@e2900400 { |
| compatible = "samsung,s5pv210-uart"; |
| reg = <0xe2900400 0x400>; |
| interrupt-parent = <&vic1>; |
| interrupts = <11>; |
| clock-names = "uart", "clk_uart_baud0", |
| "clk_uart_baud1"; |
| clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, |
| <&clocks SCLK_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@e2900800 { |
| compatible = "samsung,s5pv210-uart"; |
| reg = <0xe2900800 0x400>; |
| interrupt-parent = <&vic1>; |
| interrupts = <12>; |
| clock-names = "uart", "clk_uart_baud0", |
| "clk_uart_baud1"; |
| clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, |
| <&clocks SCLK_UART2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@e2900c00 { |
| compatible = "samsung,s5pv210-uart"; |
| reg = <0xe2900c00 0x400>; |
| interrupt-parent = <&vic1>; |
| interrupts = <13>; |
| clock-names = "uart", "clk_uart_baud0", |
| "clk_uart_baud1"; |
| clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, |
| <&clocks SCLK_UART3>; |
| status = "disabled"; |
| }; |
| |
| sdhci0: sdhci@eb000000 { |
| compatible = "samsung,s3c6410-sdhci"; |
| reg = <0xeb000000 0x100000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <26>; |
| clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; |
| clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, |
| <&clocks SCLK_MMC0>; |
| status = "disabled"; |
| }; |
| |
| sdhci1: sdhci@eb100000 { |
| compatible = "samsung,s3c6410-sdhci"; |
| reg = <0xeb100000 0x100000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <27>; |
| clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; |
| clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, |
| <&clocks SCLK_MMC1>; |
| status = "disabled"; |
| }; |
| |
| sdhci2: sdhci@eb200000 { |
| compatible = "samsung,s3c6410-sdhci"; |
| reg = <0xeb200000 0x100000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <28>; |
| clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; |
| clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, |
| <&clocks SCLK_MMC2>; |
| status = "disabled"; |
| }; |
| |
| sdhci3: sdhci@eb300000 { |
| compatible = "samsung,s3c6410-sdhci"; |
| reg = <0xeb300000 0x100000>; |
| interrupt-parent = <&vic3>; |
| interrupts = <2>; |
| clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; |
| clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, |
| <&clocks SCLK_MMC3>; |
| status = "disabled"; |
| }; |
| |
| hsotg: hsotg@ec000000 { |
| compatible = "samsung,s3c6400-hsotg"; |
| reg = <0xec000000 0x20000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <24>; |
| clocks = <&clocks CLK_USB_OTG>; |
| clock-names = "otg"; |
| phy-names = "usb2-phy"; |
| phys = <&usbphy 0>; |
| status = "disabled"; |
| }; |
| |
| usbphy: usbphy@ec100000 { |
| compatible = "samsung,s5pv210-usb2-phy"; |
| reg = <0xec100000 0x100>; |
| samsung,pmureg-phandle = <&pmu_syscon>; |
| clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; |
| clock-names = "phy", "ref"; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| ehci: ehci@ec200000 { |
| compatible = "samsung,exynos4210-ehci"; |
| reg = <0xec200000 0x100>; |
| interrupts = <23>; |
| interrupt-parent = <&vic1>; |
| clocks = <&clocks CLK_USB_HOST>; |
| clock-names = "usbhost"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| port@0 { |
| reg = <0>; |
| phys = <&usbphy 1>; |
| }; |
| }; |
| |
| ohci: ohci@ec300000 { |
| compatible = "samsung,exynos4210-ohci"; |
| reg = <0xec300000 0x100>; |
| interrupts = <23>; |
| interrupt-parent = <&vic1>; |
| clocks = <&clocks CLK_USB_HOST>; |
| clock-names = "usbhost"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| port@0 { |
| reg = <0>; |
| phys = <&usbphy 1>; |
| }; |
| }; |
| |
| mfc: codec@f1700000 { |
| compatible = "samsung,mfc-v5"; |
| reg = <0xf1700000 0x10000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <14>; |
| clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; |
| clock-names = "sclk_mfc", "mfc"; |
| }; |
| |
| vic0: interrupt-controller@f2000000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| reg = <0xf2000000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| vic1: interrupt-controller@f2100000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| reg = <0xf2100000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| vic2: interrupt-controller@f2200000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| reg = <0xf2200000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| vic3: interrupt-controller@f2300000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| reg = <0xf2300000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| fimd: fimd@f8000000 { |
| compatible = "samsung,s5pv210-fimd"; |
| interrupt-parent = <&vic2>; |
| reg = <0xf8000000 0x20000>; |
| interrupt-names = "fifo", "vsync", "lcd_sys"; |
| interrupts = <0>, <1>, <2>; |
| clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; |
| clock-names = "sclk_fimd", "fimd"; |
| status = "disabled"; |
| }; |
| |
| dmc0: dmc@f0000000 { |
| compatible = "samsung,s5pv210-dmc"; |
| reg = <0xf0000000 0x1000>; |
| }; |
| |
| dmc1: dmc@f1400000 { |
| compatible = "samsung,s5pv210-dmc"; |
| reg = <0xf1400000 0x1000>; |
| }; |
| |
| g2d: g2d@fa000000 { |
| compatible = "samsung,s5pv210-g2d"; |
| reg = <0xfa000000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <9>; |
| clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; |
| clock-names = "sclk_fimg2d", "fimg2d"; |
| }; |
| |
| mdma1: mdma@fa200000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0xfa200000 0x1000>; |
| interrupt-parent = <&vic0>; |
| interrupts = <18>; |
| clocks = <&clocks CLK_MDMA>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| }; |
| |
| rotator: rotator@fa300000 { |
| compatible = "samsung,s5pv210-rotator"; |
| reg = <0xfa300000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <4>; |
| clocks = <&clocks CLK_ROTATOR>; |
| clock-names = "rotator"; |
| }; |
| |
| i2c1: i2c@fab00000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0xfab00000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <13>; |
| clocks = <&clocks CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| camera: camera { |
| compatible = "samsung,fimc", "simple-bus"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <>; |
| clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; |
| clock-names = "sclk_cam0", "sclk_cam1"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #clock-cells = <1>; |
| clock-output-names = "cam_a_clkout", "cam_b_clkout"; |
| ranges; |
| |
| csis0: csis@fa600000 { |
| compatible = "samsung,s5pv210-csis"; |
| reg = <0xfa600000 0x4000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <29>; |
| clocks = <&clocks CLK_CSIS>, |
| <&clocks SCLK_CSIS>; |
| clock-names = "clk_csis", |
| "sclk_csis"; |
| bus-width = <4>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| fimc0: fimc@fb200000 { |
| compatible = "samsung,s5pv210-fimc"; |
| reg = <0xfb200000 0x1000>; |
| interrupts = <5>; |
| interrupt-parent = <&vic2>; |
| clocks = <&clocks CLK_FIMC0>, |
| <&clocks SCLK_FIMC0>; |
| clock-names = "fimc", |
| "sclk_fimc"; |
| samsung,pix-limits = <4224 8192 1920 4224>; |
| samsung,min-pix-alignment = <16 8>; |
| samsung,cam-if; |
| }; |
| |
| fimc1: fimc@fb300000 { |
| compatible = "samsung,s5pv210-fimc"; |
| reg = <0xfb300000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <6>; |
| clocks = <&clocks CLK_FIMC1>, |
| <&clocks SCLK_FIMC1>; |
| clock-names = "fimc", |
| "sclk_fimc"; |
| samsung,pix-limits = <4224 8192 1920 4224>; |
| samsung,min-pix-alignment = <1 1>; |
| samsung,mainscaler-ext; |
| samsung,cam-if; |
| samsung,lcd-wb; |
| }; |
| |
| fimc2: fimc@fb400000 { |
| compatible = "samsung,s5pv210-fimc"; |
| reg = <0xfb400000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <7>; |
| clocks = <&clocks CLK_FIMC2>, |
| <&clocks SCLK_FIMC2>; |
| clock-names = "fimc", |
| "sclk_fimc"; |
| samsung,pix-limits = <1920 8192 1280 1920>; |
| samsung,min-pix-alignment = <16 8>; |
| samsung,rotators = <0>; |
| samsung,cam-if; |
| }; |
| }; |
| |
| jpeg_codec: jpeg-codec@fb600000 { |
| compatible = "samsung,s5pv210-jpeg"; |
| reg = <0xfb600000 0x1000>; |
| interrupt-parent = <&vic2>; |
| interrupts = <8>; |
| clocks = <&clocks CLK_JPEG>; |
| clock-names = "jpeg"; |
| }; |
| }; |
| }; |
| |
| #include "s5pv210-pinctrl.dtsi" |
