| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2008 Extreme Engineering Solutions, Inc. |
| * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. |
| * |
| * XPedite5370 3U VPX single-board computer based on MPC8572E |
| */ |
| |
| /dts-v1/; |
| / { |
| model = "xes,xpedite5370"; |
| compatible = "xes,xpedite5370", "xes,MPC8572"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8572@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| PowerPC,8572@1 { |
| device_type = "cpu"; |
| reg = <0x1>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot |
| }; |
| |
| localbus@ef005000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; |
| reg = <0 0xef005000 0 0x1000>; |
| interrupts = <19 2>; |
| interrupt-parent = <&mpic>; |
| /* Local bus region mappings */ |
| ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ |
| 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ |
| 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ |
| 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ |
| |
| nor-boot@0,0 { |
| compatible = "amd,s29gl01gp", "cfi-flash"; |
| bank-width = <2>; |
| reg = <0 0 0x8000000>; /* 128MB */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "Primary user space"; |
| reg = <0x00000000 0x6f00000>; /* 111 MB */ |
| }; |
| partition@6f00000 { |
| label = "Primary kernel"; |
| reg = <0x6f00000 0x1000000>; /* 16 MB */ |
| }; |
| partition@7f00000 { |
| label = "Primary DTB"; |
| reg = <0x7f00000 0x40000>; /* 256 KB */ |
| }; |
| partition@7f40000 { |
| label = "Primary U-Boot environment"; |
| reg = <0x7f40000 0x40000>; /* 256 KB */ |
| }; |
| partition@7f80000 { |
| label = "Primary U-Boot"; |
| reg = <0x7f80000 0x80000>; /* 512 KB */ |
| read-only; |
| }; |
| }; |
| |
| nor-alternate@1,0 { |
| compatible = "amd,s29gl01gp", "cfi-flash"; |
| bank-width = <2>; |
| //reg = <0xf0000000 0x08000000>; /* 128MB */ |
| reg = <1 0 0x8000000>; /* 128MB */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "Secondary user space"; |
| reg = <0x00000000 0x6f00000>; /* 111 MB */ |
| }; |
| partition@6f00000 { |
| label = "Secondary kernel"; |
| reg = <0x6f00000 0x1000000>; /* 16 MB */ |
| }; |
| partition@7f00000 { |
| label = "Secondary DTB"; |
| reg = <0x7f00000 0x40000>; /* 256 KB */ |
| }; |
| partition@7f40000 { |
| label = "Secondary U-Boot environment"; |
| reg = <0x7f40000 0x40000>; /* 256 KB */ |
| }; |
| partition@7f80000 { |
| label = "Secondary U-Boot"; |
| reg = <0x7f80000 0x80000>; /* 512 KB */ |
| read-only; |
| }; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| /* |
| * Actual part could be ST Micro NAND08GW3B2A (1 GB), |
| * Micron MT29F8G08DAA (2x 512 MB), or Micron |
| * MT29F16G08FAA (2x 1 GB), depending on the build |
| * configuration |
| */ |
| compatible = "fsl,mpc8572-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <2 0 0x40000>; |
| /* U-Boot should fix this up if chip size > 1 GB */ |
| partition@0 { |
| label = "NAND Filesystem"; |
| reg = <0 0x40000000>; |
| }; |
| }; |
| |
| }; |
| |
| soc8572@ef000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,mpc8572-immr", "simple-bus"; |
| ranges = <0x0 0 0xef000000 0x100000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,mpc8572-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <17 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,mpc8572-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <18 2>; |
| }; |
| |
| memory-controller@6000 { |
| compatible = "fsl,mpc8572-memory-controller"; |
| reg = <0x6000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <18 2>; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,mpc8572-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x100000>; // L2, 1M |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| |
| temp-sensor@48 { |
| compatible = "dallas,ds1631", "dallas,ds1621"; |
| reg = <0x48>; |
| }; |
| |
| temp-sensor@4c { |
| compatible = "adi,adt7461"; |
| reg = <0x4c>; |
| }; |
| |
| cpu-supervisor@51 { |
| compatible = "dallas,ds4510"; |
| reg = <0x51>; |
| }; |
| |
| eeprom@54 { |
| compatible = "atmel,at24c128b"; |
| reg = <0x54>; |
| }; |
| |
| rtc@68 { |
| compatible = "st,m41t00", |
| "dallas,ds1338"; |
| reg = <0x68>; |
| }; |
| |
| pcie-switch@70 { |
| compatible = "plx,pex8518"; |
| reg = <0x70>; |
| }; |
| |
| gpio1: gpio@18 { |
| compatible = "nxp,pca9557"; |
| reg = <0x18>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| polarity = <0x00>; |
| }; |
| |
| gpio2: gpio@1c { |
| compatible = "nxp,pca9557"; |
| reg = <0x1c>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| polarity = <0x00>; |
| }; |
| |
| gpio3: gpio@1e { |
| compatible = "nxp,pca9557"; |
| reg = <0x1e>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| polarity = <0x00>; |
| }; |
| |
| gpio4: gpio@1f { |
| compatible = "nxp,pca9557"; |
| reg = <0x1f>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| polarity = <0x00>; |
| }; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| dma@c300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; |
| reg = <0xc300 0x4>; |
| ranges = <0x0 0xc100 0x200>; |
| cell-index = <1>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <76 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <77 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <78 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <79 2>; |
| }; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8572-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| /* eTSEC 1 */ |
| enet0: ethernet@24000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| ranges = <0x0 0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <29 2 30 2 34 2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "sgmii"; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x520 0x20>; |
| |
| phy0: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <8 1>; |
| reg = <0x1>; |
| }; |
| phy1: ethernet-phy@2 { |
| interrupt-parent = <&mpic>; |
| interrupts = <8 1>; |
| reg = <0x2>; |
| }; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| /* eTSEC 2 */ |
| enet1: ethernet@25000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| ranges = <0x0 0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <35 2 36 2 40 2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi1>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "sgmii"; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-tbi"; |
| reg = <0x520 0x20>; |
| |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| /* UART0 */ |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "fsl,ns16550", "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| /* UART1 */ |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "fsl,ns16550", "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,mpc8572-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", |
| "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2 58 2>; |
| interrupt-parent = <&mpic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0x9fe>; |
| fsl,descriptor-types-mask = <0x3ab0ebf>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| gpio0: gpio@f000 { |
| compatible = "fsl,mpc8572-gpio"; |
| reg = <0xf000 0x1000>; |
| interrupts = <47 2>; |
| interrupt-parent = <&mpic>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| |
| heartbeat { |
| label = "Heartbeat"; |
| gpios = <&gpio0 4 1>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| yellow { |
| label = "Yellow"; |
| gpios = <&gpio0 5 1>; |
| }; |
| |
| red { |
| label = "Red"; |
| gpios = <&gpio0 6 1>; |
| }; |
| |
| green { |
| label = "Green"; |
| gpios = <&gpio0 7 1>; |
| }; |
| }; |
| |
| /* PME (pattern-matcher) */ |
| pme@10000 { |
| compatible = "fsl,mpc8572-pme", "pme8572"; |
| reg = <0x10000 0x5000>; |
| interrupts = <57 2 64 2 65 2 66 2 67 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| tlu@2f000 { |
| compatible = "fsl,mpc8572-tlu", "fsl_tlu"; |
| reg = <0x2f000 0x1000>; |
| interrupts = <61 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| tlu@15000 { |
| compatible = "fsl,mpc8572-tlu", "fsl_tlu"; |
| reg = <0x15000 0x1000>; |
| interrupts = <75 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| }; |
| |
| /* |
| * PCI Express controller 3 @ ef008000 is not used. |
| * This would have been pci0 on other mpc85xx platforms. |
| */ |
| |
| /* PCI Express controller 2, wired to VPX P1,P2 backplane */ |
| pci1: pcie@ef009000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xef009000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 |
| 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <25 2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 |
| 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 |
| 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 |
| 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 |
| >; |
| pcie@0 { |
| reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xc0000000 |
| 0x2000000 0x0 0xc0000000 |
| 0x0 0x10000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| /* PCI Express controller 1, wired to PEX8518 PCIe switch */ |
| pci2: pcie@ef00a000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xef00a000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 |
| 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <26 2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0x80000000 |
| 0x2000000 0x0 0x80000000 |
| 0x0 0x40000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| }; |
